‚
European network of stockholding machinery dealers
+49 (0) 2389 5299080
Search service Sell used machines

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:
             View: 

              Search: 



          Showoffers:
          Build year From:
          1950
          Build year To:
          2021

          Rubber processing

          Machinelist: Rubber processing

          Plants, complete

          used Rubber processing Plants, complete ITW Mima Oktopus Junior

          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland
          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-G181101 · Plants, complete

          ITW Mima - Oktopus Junior - - 2004 -

          Technical details
          used Rubber processing Plants, complete Berstorff Mikrowellen/Heissluft Kanal

          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland
          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-G220101 · Plants, complete

          Berstorff - Mikrowellen/Heissluft Kanal - - 1996 -

          Technical details
          Condition: used - in production until approx. middle of February 2022 Specification: microwave vulcanizing line hot air channel with microwave Conversion to S7 control, 2015 - microwave vulcanizing line: MW24/HL 12x2/KK09/RA - Type: MW 24.1-200.075 - Channel length microwave approx.: 17.170 mm - Microwave feed: Number of HF generators: 4 Power per HF generator: max. 6 kW power setting: 0 / 10 - 100% Frequency of the HF generators: 2450 - 2470 MHz - channel length hot air approx.: 26.170 mm - Air heating: Number of heating zones: 3 Power per heating zone: 9,9 kW Heating zones gas heated channel air temperature max.: 250°C at the injection point - Cooling basin length approx.: 15,000 mm - belt width: 105 to 200 mm, per station - Transpot belt height approx.: 1,100 mm - number of belts: 1 - transport speed: 1 - 30 m/min - Voltage: 3 x 400 V, 50 Hz - Control voltage: 230 V, 50 Hz/ 24 V DC - Material running direction: from right to left - Conversion to Siemens S7 control was made in 2015 Documentation in German language available. plant will be available from approx. kW 7/2022. A second identical system will be available from kW 11/2022, but with the material material flow direction from left to right. In this second the control panel is defective. However, it can be repaired at Siemens.
            Description :
            Condition: used - in production
            until approx. middle of February 2022

            Specification: microwave vulcanizing line
            hot air channel with microwave
            Conversion to S7 control, 2015

            - microwave vulcanizing line: MW24/HL 12x2/KK09/RA
            - Type: MW 24.1-200.075
            - Channel length microwave approx.: 17.170 mm
            - Microwave feed:
            Number of HF generators: 4
            Power per HF generator: max. 6 kW
            power setting: 0 / 10 - 100%
            Frequency of the HF generators: 2450 - 2470 MHz
            - channel length hot air approx.: 26.170 mm
            - Air heating:
            Number of heating zones: 3
            Power per heating zone: 9,9 kW
            Heating zones gas heated
            channel air temperature max.: 250°C at the injection point
            - Cooling basin length approx.: 15,000 mm
            - belt width: 105 to 200 mm, per station
            - Transpot belt height approx.: 1,100 mm
            - number of belts: 1
            - transport speed: 1 - 30 m/min
            - Voltage: 3 x 400 V, 50 Hz
            - Control voltage: 230 V, 50 Hz/ 24 V DC
            - Material running direction: from right to left
            - Conversion to Siemens S7 control was made in 2015

            Documentation in German language available.

            plant will be available from approx. kW 7/2022. A second
            identical system will be available from kW 11/2022, but with the material
            material flow direction from left to right. In this second
            the control panel is defective.
            However, it can be repaired at Siemens.

          used Rubber processing Plants, complete Berstorff Compoundieranlage ZE 40 A

          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland
          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-G210301 · Plants, complete

          Berstorff Compoundieranlage - ZE 40 A - - 1993 - 2004 -

          Technical details
          Condition: used Specification: compounding plant with underwater pelletising system and drying system second-hand - consisting of: Pos 1, extruder system - Berstorff ZE 40 A - year of construction: 1993 - screw diameter: 43 mm - segmented screw and barrel - length: 1 screw pair each - L/D 33,5 - L/D 39,5 - Screw speed max.: 500 rpm - Screw torque: 400 Nm - DC motor with tachogenerator - Drive power: 42 kW - Rated speed: 2,500 rpm - Electrical connection: 340/460 V - Motor was completely overhauled in 2015 - Control: Siemens S7-300 was completely reprogrammed - New cylinder still available: 2 pcs. 6D-cylinder with cooling; 1 pc. 1,5D-intermediate plate - 1 side feeder (screw diameter 34 mm) - Seitenbeschickung fahrbar - various strand nozzle heads - Visualisation: WinCC Pos 2, underwater pelletising system - Make Gala Model 6 - Year of manufacture: 2001 - speed: 500 to 3.600 rpm - additional, overhauled motor Pos 3, Dryer system: - Make Econ Type: EWT 250 - year of construction: 2015 - incl. pipe system Pos 4, screen changing and starting device: - Make: Trendelkamp, Type: TASD 4L - Year of construction: 2004 - Filter inserts: 1 - Filter area: 110 cm² - Extrusion capacity approx.: 180 - 500 kg/h - Heating capacity: 4x 1.000 W - Hydraulic power: 7,5 kW - Delivery volume: 3,6 l/min - Condition of bolts: several grooves Pos 5, dosing (gravimetric) - Make: K-Tron - Year of construction: 2001 - 2 dosing units: Type: K2-ML-S60 (single screw) Type K2-ML-T35 (double screw) - hanging system - Control unit: 2x KSU (control of the feeders via extruder display possible) Pos 6, System control/visualisation
            Description :
            Condition: used

            Specification: compounding plant with underwater pelletising system
            and drying system
            second-hand - consisting of:

            Pos 1, extruder system
            - Berstorff ZE 40 A
            - year of construction: 1993
            - screw diameter: 43 mm
            - segmented screw and barrel
            - length: 1 screw pair each
            - L/D 33,5
            - L/D 39,5
            - Screw speed max.: 500 rpm
            - Screw torque: 400 Nm
            - DC motor with tachogenerator
            - Drive power: 42 kW
            - Rated speed: 2,500 rpm
            - Electrical connection: 340/460 V
            - Motor was completely overhauled in 2015
            - Control: Siemens S7-300
            was completely reprogrammed
            - New cylinder still available: 2 pcs. 6D-cylinder with cooling;
            1 pc. 1,5D-intermediate plate
            - 1 side feeder (screw diameter 34 mm)
            - Seitenbeschickung fahrbar
            - various strand nozzle heads
            - Visualisation: WinCC

            Pos 2, underwater pelletising system
            - Make Gala Model 6
            - Year of manufacture: 2001
            - speed: 500 to 3.600 rpm
            - additional, overhauled motor

            Pos 3, Dryer system:
            - Make Econ Type: EWT 250
            - year of construction: 2015
            - incl. pipe system

            Pos 4, screen changing and starting device:
            - Make: Trendelkamp, Type: TASD 4L
            - Year of construction: 2004
            - Filter inserts: 1
            - Filter area: 110 cm²
            - Extrusion capacity approx.: 180 - 500 kg/h
            - Heating capacity: 4x 1.000 W
            - Hydraulic power: 7,5 kW
            - Delivery volume: 3,6 l/min
            - Condition of bolts: several grooves

            Pos 5, dosing (gravimetric)
            - Make: K-Tron
            - Year of construction: 2001
            - 2 dosing units:
            Type: K2-ML-S60 (single screw)
            Type K2-ML-T35 (double screw)
            - hanging system
            - Control unit: 2x KSU
            (control of the feeders via extruder display possible)



            Pos 6, System control/visualisation

          used Rubber processing Plants, complete GERLACH 3-Etagen Heizkanal

          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland
          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-G180201 · Plants, complete

          GERLACH - 3-Etagen Heizkanal - - n.b. -

          Technical details
          used Rubber processing Plants, complete GERLACH Heizkanal HLK 150-1-110-12m

          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland
          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-G210601 · Plants, complete

          GERLACH - Heizkanal HLK 150-1-110-12m - - 2003 -

          Technical details
          Condition: used, Specification: 12m heating duct incl. PCT - length approx.: 12.000 mm - extrusion height: 1.100 mm - extrusion direction: from right to left - belt width: 150 mm - Channel width: 190 mm - At the inlet and outlet there is a 50 kW burner each - In the PCT there is a 70 kW burner - Temperature range: 240°C to 340°C - Heating: gas heated - Belt speed: 2-40 m/min - Control: Siemens S7
            Description :
            Condition: used,

            Specification: 12m heating duct incl. PCT

            - length approx.: 12.000 mm
            - extrusion height: 1.100 mm
            - extrusion direction: from right to left
            - belt width: 150 mm
            - Channel width: 190 mm
            - At the inlet and outlet there is a 50 kW burner each
            - In the PCT there is a 70 kW burner
            - Temperature range: 240°C to 340°C
            - Heating: gas heated
            - Belt speed: 2-40 m/min
            - Control: Siemens S7

          used Rubber processing Plants, complete GERLACH Heizkanal HLK 150-1-110-12m

          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland
          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-G220402 · Plants, complete

          GERLACH - Heizkanal HLK 150-1-110-12m - - 2003 -

          Technical details
          machine measurements Länge ca. 12.000 mm︱machine weight -- kg︱power capacity 170 kW︱
          Condition: used, Specification: 12m heating duct incl. PCT - length approx.: 12.000 mm - extrusion height: 1.100 mm - extrusion direction: from right to left - belt width: 150 mm - Channel width: 190 mm - At the inlet and outlet there is a 50 kW burner each - In the PCT there is a 70 kW burner - Temperature range: 240°C to 340°C - Heating: gas heated - Belt speed: 2-40 m/min - Control: Siemens S7 Relocation date no later than mid-June 2022.
            machine measurements Länge ca. 12.000 mm
            machine weight -- kg
            power capacity 170 kW
            Description :
            Condition: used,

            Specification: 12m heating duct incl. PCT

            - length approx.: 12.000 mm
            - extrusion height: 1.100 mm
            - extrusion direction: from right to left
            - belt width: 150 mm
            - Channel width: 190 mm
            - At the inlet and outlet there is a 50 kW burner each
            - In the PCT there is a 70 kW burner
            - Temperature range: 240°C to 340°C
            - Heating: gas heated
            - Belt speed: 2-40 m/min
            - Control: Siemens S7

            Relocation date no later than mid-June 2022.

          used Rubber processing Plants, complete GERLACH Nachheizkanal

          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland
          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-G210603 · Plants, complete

          GERLACH - Nachheizkanal - - 1989 -

          Technical details
          Condition: used, Specification: 21m post-heating duct with heat exchanger - length approx.: 21.000 mm - consisting of: 21.000 mm heating channel, incl. heat exchanger - extrusion height: 1.100 mm - Extrusion direction: from right to left - 4x burners with 50kW burner each - Heating: gas heated - Control system: Siemens - The channel was extended by 2x 3m segments in 2016 - The burners were renewed in 2016
            Description :
            Condition: used,

            Specification: 21m post-heating duct with heat exchanger

            - length approx.: 21.000 mm
            - consisting of: 21.000 mm heating channel, incl. heat exchanger
            - extrusion height: 1.100 mm
            - Extrusion direction: from right to left
            - 4x burners with 50kW burner each
            - Heating: gas heated
            - Control system: Siemens
            - The channel was extended by 2x 3m segments in 2016
            - The burners were renewed in 2016

          used Rubber processing Plants, complete GERLACH Nachheizkanal

          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland
          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-G220403 · Plants, complete

          GERLACH - Nachheizkanal - - 1989/2015 -

          Technical details
          machine measurements Länge ca. 21.000 mm︱machine weight -- kg︱power capacity 200 kW︱
          Condition: used, Specification: 21m post-heating duct with heat exchanger - length approx.: 21.000 mm - consisting of: 21.000 mm heating channel, incl. heat exchanger - extrusion height: 1.100 mm - Extrusion direction: from right to left - 4x burners with 50kW burner each - Tempering range: 240°C - 340°C - Heating: gas heated - Control system: Siemens Heating duct extension by 2x 3m, 2015 - The duct was extended by 2x 3m segments in 2016 - The burners of the 21,000 mm system were renewed in 2015
            machine measurements Länge ca. 21.000 mm
            machine weight -- kg
            power capacity 200 kW
            Description :
            Condition: used,

            Specification: 21m post-heating duct with heat exchanger

            - length approx.: 21.000 mm
            - consisting of: 21.000 mm heating channel, incl. heat exchanger
            - extrusion height: 1.100 mm
            - Extrusion direction: from right to left
            - 4x burners with 50kW burner each
            - Tempering range: 240°C - 340°C
            - Heating: gas heated
            - Control system: Siemens

            Heating duct extension by 2x 3m, 2015
            - The duct was extended by 2x 3m segments in 2016
            - The burners of the 21,000 mm system were renewed in 2015

          used Rubber processing Plants, complete GERLACH SHF-Kanal, Schockmodul + UHF

          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland
          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-G210602 · Plants, complete

          GERLACH - SHF-Kanal, Schockmodul + UHF - - 2003 -

          Technical details
          Condition: used, Specification: heating channel + shock module incl. UHF and PCT Typ: SHF 150-120-1-147-12 - length approx.: 12.000 mm - Consisting of: 9.000 mm hot air channel, incl. UHF 3.000 mm shock module with folding infeed conveyor and PCT - UHF power: 4x 3 kW - Temperature range UHF part: 240°C - 340°C - Temperature range shock module: 240°C - 500°C - Shock module with non-driven metal rollers - Extrusion height: 1,100 mm - Extrusion direction: from right to left - At the infeed and outfeed one 50 kW burner each - PCT burner capacity: 70 kW - Heating: gas heated - Control: Siemens S7
            Description :
            Condition: used,

            Specification: heating channel + shock module incl. UHF and PCT
            Typ: SHF 150-120-1-147-12

            - length approx.: 12.000 mm
            - Consisting of: 9.000 mm hot air channel, incl. UHF
            3.000 mm shock module
            with folding infeed conveyor and PCT
            - UHF power: 4x 3 kW
            - Temperature range UHF part: 240°C - 340°C
            - Temperature range shock module: 240°C - 500°C
            - Shock module with non-driven metal rollers
            - Extrusion height: 1,100 mm
            - Extrusion direction: from right to left
            - At the infeed and outfeed one 50 kW burner each
            - PCT burner capacity: 70 kW
            - Heating: gas heated
            - Control: Siemens S7

          used Rubber processing Plants, complete GERLACH SHF-Kanal, Schockmodul + UHF

          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland
          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-G220401 · Plants, complete

          GERLACH - SHF-Kanal, Schockmodul + UHF - - 2003 -

          Technical details
          machine measurements Länge ca. 12.000 mm︱machine weight -- kg︱power capacity 182 kW︱
          Condition: used, Specification: heating channel + shock module incl. UHF and PCT Typ: SHF 150-120-1-147-12 - length approx.: 12.000 mm - Consisting of: 9.000 mm hot air channel, incl. UHF 3.000 mm shock module with folding infeed conveyor and PCT - UHF power: 4x 3 kW - Temperature range UHF part: 240°C - 340°C - Temperature range shock module: 240°C - 500°C - Shock module with non-driven metal rollers - Extrusion height: 1,100 mm - Extrusion direction: from right to left - At the infeed and outfeed one 50 kW burner each - PCT burner capacity: 70 kW - Heating: gas heated - Control: Siemens S7 Relocation date no later than mid-June 2022.
            machine measurements Länge ca. 12.000 mm
            machine weight -- kg
            power capacity 182 kW
            Description :
            Condition: used,

            Specification: heating channel + shock module incl. UHF and PCT
            Typ: SHF 150-120-1-147-12

            - length approx.: 12.000 mm
            - Consisting of: 9.000 mm hot air channel, incl. UHF
            3.000 mm shock module
            with folding infeed conveyor and PCT
            - UHF power: 4x 3 kW
            - Temperature range UHF part: 240°C - 340°C
            - Temperature range shock module: 240°C - 500°C
            - Shock module with non-driven metal rollers
            - Extrusion height: 1,100 mm
            - Extrusion direction: from right to left
            - At the infeed and outfeed one 50 kW burner each
            - PCT burner capacity: 70 kW
            - Heating: gas heated
            - Control: Siemens S7

            Relocation date no later than mid-June 2022.

          •   
          •   
          • 1  
            •

            Trader Profile:   WMT GmbH & Co.kg

          Contact Trader



            WMT GmbH & Co.kg
           Siemensstraße 1
            46342 - Velen-Ramsdorf
            Deutschland
            +49 2863 92477-47">+49 2863 92477-47
            +49 2863 92477-50
            info@w-m-t.de
            www.w-m-t.de

          Profile of Trader

          Welcome to WMT machine tools

          Purchase and sale of new and used machine tools.
          Sales of workshop equipment
          Purchase of used machine tools
          Processing of operating resolutions
          Mediation of complete production facilities

          Trade of machine tools of any kind. Are you looking for a used machine? Visit us…

          Aluminium Circular Saw Band Saw Band Saw - Automatic Band Saw - Automatic - Horizontal Band Saw - Vertical Bandsaw - HorizontalBandsaw mobile Bed Type Milling Machine - Universal Belt Grinding Machine Bench Drilling Machine Bench Lathe Boring Machine - Automatic Center Lathe CNC Lathe - Inclined Bed Type Cold Circular Saw Drilling and Milling M/C Flanging and Seam Rolling Machine Flat and plate processing Folding Machine Hand-Operated Press Heavy Duty Lathe High-Speed Radial Drilling Machine Hydr. pressbrake Hydraulic Press Lathe - cycle-controlled Notching Machine Piercing Press Pillar Drilling Machine Pipe-Bending Machine Plate Shear - Hydraulic Plate Shear - Mechanical Pneumatic Press Profile-Bending Machine Radial Drilling Machine Roller tracks / stop systems Rolls bending machine - 3 Rolls Rotary Welding Table Saw-Blade Sharpening Machine Section Shear - Combined Sheet metal working machine Sliding bed lathe Straightening Press - Double Column Surface Grinding Machine Table Type Boring and Milling Machine Thread-Cutting Machine Toggle Press - Single Column Tool Grinder - Universal tool presetter Tool Room Milling Machine - Universal Tryout Press - hydraulic Universal Milling Machine Vessel Turning Unit Welding Smoke Suction Welding Table Welding table equipment Wheel Stand Drawer cabinets pallet truck electric pallet trucks by hand Tool cabinets Tool trolleys Workbenchescantilever shelving system Container Fork Lift Truck - Electrical Heavy Goods Trailer Hoist Traverse Lift table Load magnet Sandblasting Machine bolster plate Chuck Clamping Chuck Clamping Table Cross-Moving-Table Faceplate Lynette Rotary Table Vise

          WMT GmbH & Co.KG

          Siemensstraße 1

          46342 Velen-Ramsdorf
          FON: +49 2863 92477-47
          FAX: +49 2863 92477-50
          E-Mail: info@w-m-t.de



          TOP Manufacturer:

          ENGEL - DEMAG - ARBURG - COMERIO ERCOLE - HANS VON DER HEYDE - TROESTER - MECCANICHE MODERNE - ALPHA TECHNOLOGIES - ITAL - MEB -

          WMT GmbH & Co.kg 46342 - Velen-Ramsdorf Siemensstraße 1 Deutschland
          WMT GmbH & Co.kg

          Siemensstraße 1



          Contact Trader


            WMT GmbH & Co.kg
           Siemensstraße 1
            46342 - Velen-Ramsdorf
            Deutschland
            +49 2863 92477-47
            +49 2863 92477-50
            info@w-m-t.de
            www.w-m-t.de
            Contact person:
           

          Trader Profile



          Machine category


          Abkantpresse - hydraulisch · Abricht- und Dickenhobel · Alu-Kreissäge · Aufspanntisch · Ausklinkmaschine · Bandschleifmaschine · Bandsäge - horizontal · Bandsäge - Vertikal · Bandsäge mobil · Bandsägeautomat - Horizontal · Behälterdrehvorrichtung · Bettfräsmaschine - Vertikal · Biegemaschine horizontal · Blechbearbeitungsanlagen · Blechbiegemaschine - 3 Walzen · Blechbiegemaschine - 4 Walzen · Bohr- und Fräsmaschine · Bohrerschleifmaschine · Bügelmesschraube · Bügelsäge · Bügelsäge - Automatisch · Bürstenentgrater · Doppel-Gehrungsäge · Doppelschleifbock · Drehmaschine - zyklengesteuert · Drehmeißel/Drehstahl · Einständerpresse - Hydraulisch · Flachschleifmaschine · Flachstahl- / Plattenbearbeitung · Fräsmaschine - Horizontal · Fräsmaschine - Universal · Gabelhubwagen - Elektro · Gabelhubwagen Elektro · Gabelhubwagen Hand · Gabelstapler Diesel · Gabelstapler Elektro · Gabelstapler Gas · Generatoren · Gewindebohrmaschine · Gewindeschneidmaschine · Gleitschleifanlage · Handhebelpresse · Handwerkzeuge · Hubtische · Kaltkreissäge · Kaltkreissäge - Automatik · Kapp- und Gehrungssäge · Kniehebelpresse - Einständer · Kombi-Schleifmaschine · Kompressoren · Krananlagen · Kreissäge · Kreuztisch · Kühlmittelanlage · Langgutregale · Lasthebemagnete · Leit- und Zugspindeldrehmaschine · Lochstanze - Einständer · Magnetbohrmaschine · Magnetspannplatte · Maschinen Untergestell · Maschinenleuchten · Messerschleifmaschine · Plasmaschneidegerät · Pneumatische Presse · Polierbock · Profil- Ring- Biegemaschine · Profilstahlschere - Kombiniert · Punktschweißmaschine · Regalsysteme · Reinigungssysteme · Richtpresse - Doppelständer · Rohrausschleifer · Rohrbiegemaschine · Rollenbahnen / Anschlag-Systeme · Räumnadeln · Schnellradiale - Bohrmaschine · Schraubenkompressor · Schraubstock · Schubladenschränke · Schweißanlage · Schweißdrehtisch · Schweißdrehtisch - rund · Schweißkantenabschrägmaschine · Schweißrauchabsaugung · Schweißtisch · Schweißtisch-Zubehör · Schweißzubehör · Schwenkbiegemaschine · Schwerlastanhänger · Sicken- und Bördelmaschine · Sonstige Fördertechnik · Sonstiges · Strahlanlage · Stähleschleifmaschine · Ständerbohrmaschine · Sägeblattschärfmaschine · Säulenbohrmaschine · Tafelschere - hydraulisch · Tafelschere - mechanisch · Teilapparat · Tischbohrmaschine · Tischbohrwerk · Tischdrehbank · Trowalisiermaschine · Unterstellbock · Wasserpumpe · Werkbänke · Werkstattpressen - hydraulisch · Werkzeugaufnahme · Werkzeugfräsmaschine - Universal · Werkzeugschränke · Werkzeugwagen ·
          Compendium
          Software
          Used machines content
          Privacy
          Follow us
          ©2000 - 2024, Logotech oHG · Software- and Internet Services - All rights reserved