European network of stockholding machinery dealers

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:

          Glazing bead sww

          Machinelist: Glazing bead sww


          Boring machine for fittings

          used Window production: wood Boring machine for fittings GÖTZINGER OBM Plus


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6265 · Boring machine for fittings

          GÖTZINGER - OBM Plus - - neu -

          Technical details
          Number of boring motors 1 St.︱boring of corner bearing 1=yes, 0=no 1 ja︱boring of olive 1=yes, 0=no 1 ja︱
          Olive drilling machine type OBM-PLUS (corner and shear bearing + handle olive drilling) Drilling unit vertical with drill head quick-change device Pneumatic feed via foot valve 1 adjustable backstop 2 swiveling workpiece supports 1 machine stand complete with shelf 220/400V, 50Hz, 1.1KW Machine without drilling head, without drilling tool ----------------------------------------------------- Basic price in the above version on request! Options with additional prices: -Drilling head BKF 3, 21.5 mm pitch, quickly changeable -1 set of drill bits for handles 2 dowel drills d=10 left 1 artificial drill d=25 -Drill head BKF 2/3 quick-change drill 2/3 spindles for corner bearings on the loose frame part (Sigenia, Maco, Roto, Winkhaus, GU) complete with stop system with 2 folding stops -Drill 2 cylinder head drill bits for corner bearing Special accessories: -folding stops -Stop system for central drilling -Landing gear We would be happy to send you the price list with all options on request. (Technical information according to the manufacturer - without guarantee!)
            Number of boring motors 1 St.
            boring of corner bearing 1=yes, . 1 ja
            boring of olive 1=yes, 0=no 1 ja
            Description :
            Olive drilling machine type OBM-PLUS (corner and shear bearing + handle olive
            drilling)

            Drilling unit vertical with drill head quick-change device

            Pneumatic feed via foot valve

            1 adjustable backstop
            2 swiveling workpiece supports
            1 machine stand complete with shelf

            220/400V, 50Hz, 1.1KW

            Machine without drilling head, without drilling tool
            -----------------------------------------------------
            Basic price in the above version on request!

            Options with additional prices:

            -Drilling head BKF 3, 21.5 mm pitch, quickly changeable
            -1 set of drill bits for handles
            2 dowel drills d=10 left
            1 artificial drill d=25

            -Drill head BKF 2/3 quick-change drill 2/3 spindles for corner bearings
            on the loose frame part (Sigenia, Maco, Roto, Winkhaus, GU)
            complete with stop system with 2 folding stops
            -Drill 2 cylinder head drill bits for corner bearing

            Special accessories:

            -folding stops
            -Stop system for central drilling
            -Landing gear

            We would be happy to send you the price list with all options on request.


            (Technical information according to the manufacturer - without guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Boring machine for fittings GÖTZINGER OBM 1


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6264 · Boring machine for fittings

          GÖTZINGER - OBM 1 - - neu -

          Technical details
          Number of boring motors 1 St.︱boring of corner bearing 1=yes, 0=no 0 nein︱boring of olive 1=yes, 0=no 1 ja︱
          Olive drilling machine type OBM 1 Standard version (only handle olive drilling) Drilling unit vertical complete with drill head BKF 3, 21.5 mm pitch Drill mount M 10, cyl. right/left Pneumatic feed via foot valve Spring-loaded hold-down devices Stop system 2200 mm Total length with 10 folding stops adjusted to fitting 1 adjustable backstop 2 swiveling workpiece supports 1 machine stand complete with shelf 220/380V, 50Hz, 1.1KW Machine complete, but without drilling tool ----------------------------------- Price in the above version on request! Options with extra charge: -1 set of drills consisting of: 2 dowel drills d = 10 left 1 artificial drill d = 25 (or according to choice or manufacturer's fitting) -folding stops -Stop system for central drilling -Landing gear -Roller conveyor right/left 1.5 m, 200 mm wide complete with 4 rolls each - Packing 1 box Packaging 1 pallet with foil We will be happy to send you the complete price sheet on request! (Technical information according to the manufacturer - without guarantee!)
            Number of boring motors 1 St.
            boring of olive 1=yes, 0=no 1 ja
            Description :
            Olive drilling machine type OBM 1

            Standard version (only handle olive drilling)

            Drilling unit vertical

            complete with drill head BKF 3, 21.5 mm pitch

            Drill mount M 10, cyl. right/left

            Pneumatic feed via foot valve

            Spring-loaded hold-down devices

            Stop system 2200 mm

            Total length with 10 folding stops

            adjusted to fitting

            1 adjustable backstop
            2 swiveling workpiece supports
            1 machine stand complete with shelf

            220/380V, 50Hz, 1.1KW

            Machine complete, but without drilling tool
            -----------------------------------
            Price in the above version on request!


            Options with extra charge:

            -1 set of drills consisting of:
            2 dowel drills d = 10 left
            1 artificial drill d = 25
            (or according to choice or manufacturer's fitting)

            -folding stops

            -Stop system for central drilling

            -Landing gear

            -Roller conveyor right/left 1.5 m, 200 mm wide
            complete with 4 rolls each

            - Packing 1 box
            Packaging 1 pallet with foil


            We will be happy to send you the complete price sheet on request!


            (Technical information according to the manufacturer - without guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Boring machine for fittings HESS Bohrstation Ecklager+ Olive


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-2714 · Boring machine for fittings

          HESS - Bohrstation Ecklager+ Olive - - gebraucht -

          Technical details
          Number of boring motors 1 St.︱boring of corner bearing 1=yes, 0=no 1 0︱boring of olive 1=yes, 0=no 1 0︱length 2600 mm︱width 800 mm︱height 1.250 mm︱
          Hess corner bearing and olive drilling machine ---------------------------------- - Stable base frame as a support wall - precise support made of abrasion-resistant and dimensionally stable plastic for frames and sashes up to 100 mm thick - Corner bearing and olive drilling in one machine and in one Drilling unit - easy and comfortable vertical work - easy handling - no templates, minimal Time required for safe workpiece positioning, Guarantee for exact and precise holes - 2 clamping cylinders for immovable fixation of sashes or frame adjustable to different wood thicknesses - Lateral stop in the rebate for the corner bearings - Ergonomically arranged stop system for olive drilling with 14 hinged stops and additional color markings - fixed stop system for borehole - height determination when changing Corner camp to Olive - automatic drilling depth sensing for corner bearing and olive - Drilling unit with quick-change chuck for the various tools for corner bearing and olive - Tool change “in the blink of an eye” - automatic program flow - clean work thanks to effective suction - Small space requirement and mobile thanks to swivel/brake casters Electrical equipment according to VDE Electrical connection: 0.55 kW, 400 volts, 3/N, PE, 50 Hz Pneumatic connection: R 1/4", min. 4 bar, max. 8 bar Air consumption: 7 NL / cycle Suction connection piece: 1 x 80mm diameter Suction speed: 25 m/sec. External dimensions/floor dimensions/space requirements: Width: 2600mm Height: 1250mm Depth: 800mm Support height: 300 mm Weight: 310kg Paint finish: RAL 7030 stone gray with 1018 zinc yellow ---------------------------------- (Technical description according to the manufacturer - no guarantee!)
            Number of boring motors 1 St.
            boring of corner bearing 1=yes, . 1 0
            boring of olive 1=yes, 0=no 1 0
            length 2600 mm
            width 800 mm
            height 1.250 mm
            Description :
            Hess corner bearing and olive drilling machine
            ----------------------------------
            - Stable base frame as a support wall
            - precise support made of abrasion-resistant and dimensionally stable plastic
            for frames and sashes up to 100 mm thick
            - Corner bearing and olive drilling in one machine and in one
            Drilling unit
            - easy and comfortable vertical work
            - easy handling - no templates, minimal
            Time required for safe workpiece positioning,
            Guarantee for exact and precise holes
            - 2 clamping cylinders for immovable fixation of sashes
            or frame adjustable to different wood thicknesses
            - Lateral stop in the rebate for the corner bearings
            - Ergonomically arranged stop system for olive drilling
            with 14 hinged stops and additional color markings
            - fixed stop system for borehole - height determination when changing
            Corner camp to Olive
            - automatic drilling depth sensing for corner bearing and olive
            - Drilling unit with quick-change chuck for the various tools
            for corner bearing and olive
            - Tool change “in the blink of an eye”
            - automatic program flow
            - clean work thanks to effective suction
            - Small space requirement and mobile thanks to swivel/brake casters

            Electrical equipment according to VDE
            Electrical connection: 0.55 kW, 400 volts, 3/N, PE, 50 Hz

            Pneumatic connection: R 1/4", min. 4 bar, max. 8 bar
            Air consumption: 7 NL / cycle
            Suction connection piece: 1 x 80mm diameter
            Suction speed: 25 m/sec.

            External dimensions/floor dimensions/space requirements:
            Width: 2600mm
            Height: 1250mm
            Depth: 800mm
            Support height: 300 mm

            Weight: 310kg

            Paint finish: RAL 7030 stone gray with 1018 zinc yellow
            ----------------------------------

            (Technical description according to the manufacturer - no guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Boring machine for fittings GÖTZINGER OBM-Plus


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-2698 · Boring machine for fittings

          GÖTZINGER - OBM-Plus - - gebraucht -

          Technical details
          Number of boring motors 1 St.︱boring of corner bearing 1=yes, 0=no 1 ja/Yes︱boring of olive 1=yes, 0=no 1 ja/yes︱
          Corner bearing and olive drilling machine Götzinger OBM-PLUS Vertical drilling unit with quick-change device Pneumatic feed via foot valve 1 adjustable backstop 2 swiveling workpiece supports 1 machine stand complete with shelf Left and right roller conveyor each 1.5 m, 200 mm wide, 4 rollers each 220/380V, 50Hz, 1.1KW 1 drill head BKF 3, 21.5 mm pitch, quick-changeable Drill mount M 10, cyl. right/left complete with stop system 2200 mm long Total length with 12 folding stops adjusted to a constant grip dimension (olive drilling) Consisting of: 2 dowel drills d=10 mm 1 artificial drill d=25 mm 1 drill head BKF 2/3 quick-change drill 2/3 spindles for corner bearing on the loose frame part. Hardware Roto- alternative on request Complete with stop system with 2 folding stops Drill mount: M 10 right/left 2x7 mm and 34 mm (Technical description according to the manufacturer - without guarantee!)
            Number of boring motors 1 St.
            boring of corner bearing 1=yes, . 1 ja/Yes
            boring of olive 1=yes, 0=no 1 ja/yes
            Description :
            Corner bearing and olive drilling machine Götzinger OBM-PLUS

            Vertical drilling unit with quick-change device
            Pneumatic feed via foot valve
            1 adjustable backstop
            2 swiveling workpiece supports
            1 machine stand complete with shelf
            Left and right roller conveyor each 1.5 m, 200 mm wide, 4 rollers each

            220/380V, 50Hz, 1.1KW


            1 drill head BKF 3, 21.5 mm pitch, quick-changeable
            Drill mount M 10, cyl. right/left
            complete with stop system 2200 mm long
            Total length with 12 folding stops
            adjusted to a constant grip dimension (olive drilling)
            Consisting of: 2 dowel drills d=10 mm
            1 artificial drill d=25 mm

            1 drill head BKF 2/3 quick-change drill 2/3 spindles for corner bearing
            on the loose frame part. Hardware Roto- alternative on request
            Complete with stop system with 2 folding stops
            Drill mount: M 10 right/left 2x7 mm and 34 mm



            (Technical description according to the manufacturer - without guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Boring machine for fittings GÖTZINGER OBM Plus


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6841 · Boring machine for fittings

          GÖTZINGER - OBM Plus - - gebraucht -

          Technical details
          Number of boring motors 1 St.︱boring of corner bearing 1=yes, 0=no 1 0︱boring of olive 1=yes, 0=no 1 0︱Dimensions (L/W/H) 3600x800x1900 mm︱weight ca. 120 kg︱
          Olive drilling machine type: OBM-Plus Special version (corner and scissor bearing + handle olive drilling) --------------------------------- Vertical drilling unit with quick-change device Pneumatic feed via foot valve 1 adjustable back stop 2 swiveling workpiece supports 1 machine stand complete with shelf 220/380V, 50Hz, 1.1KW Machine complete, but without drilling tools Drill head BKF 3, 21.5mm pitch, quick-changeable Drill holder M 10, cyl. right/left complete with stop system 2200 mm long Total length with 10 folding stops set to a constant grip size (for handle olives) Drill head BKF 2 can be changed quickly 2 spindles for corner bearings drill on the loose frame part complete with stop system with 2 folding stops Drill consisting of 2 pieces of dowel drills d = 12 mm left 1 piece of artificial drill d = 25 mm right Drill 2 cylinder head drills for corner bearings Stop system for center drilling landing gear Roller conveyor right/left 1.5 m, 200 mm wide complete with 4 rolls each 2 additional stops for picking the fighter groove Installation dimensions: 3600 x 800 x 1900 mm -------------------------------- Price of the above machine on request! -------------------------------- Option: Prices for other drilling heads (other hardware) on request (Technical information according to the manufacturer - no guarantee!
            Number of boring motors 1 St.
            boring of corner bearing 1=yes, . 1 0
            boring of olive 1=yes, 0=no 1 0
            Dimensions (L/W/H) 3600x800x1900 mm
            weight ca. 120 kg
            Description :
            Olive drilling machine type: OBM-Plus
            Special version (corner and scissor bearing +
            handle olive drilling)
            ---------------------------------
            Vertical drilling unit with quick-change device
            Pneumatic feed via foot valve
            1 adjustable back stop
            2 swiveling workpiece supports
            1 machine stand complete with shelf
            220/380V, 50Hz, 1.1KW
            Machine complete, but without drilling tools

            Drill head BKF 3, 21.5mm pitch, quick-changeable
            Drill holder M 10, cyl. right/left
            complete with stop system 2200 mm long
            Total length with 10 folding stops
            set to a constant grip size
            (for handle olives)

            Drill head BKF 2 can be changed quickly
            2 spindles for corner bearings drill on the loose frame part

            complete with stop system with 2 folding stops

            Drill consisting of
            2 pieces of dowel drills d = 12 mm left
            1 piece of artificial drill d = 25 mm right

            Drill 2 cylinder head drills for corner bearings

            Stop system for center drilling

            landing gear

            Roller conveyor right/left 1.5 m, 200 mm wide
            complete with 4 rolls each

            2 additional stops for picking
            the fighter groove

            Installation dimensions: 3600 x 800 x 1900 mm
            --------------------------------
            Price of the above machine on request!
            --------------------------------

            Option: Prices for other drilling heads (other hardware) on request

            (Technical information according to the manufacturer - no guarantee!


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact

          Glazing bead sww

          used Window production: wood Glazing bead sww HECHT Exenso DS350E - Video -


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-2718 · Glazing bead sww

          HECHT - Exenso DS350E - Video - - - Vorführmaschine - ja/CNC

          Technical details
          Number of motors 2 Stück︱0 3000 mm︱Control ja/CNC ︱loading dimensions L x W x H 4000 x 1500 x 1500 mm︱Weight 800 kg︱
          HECHT double miter saw Exenso DS350E - 3000 mm ----------------------------------------------------- For wooden glazing beads, sash bars, profile strips, aluminum strips, etc. Pos. 1.1 article number 942.5103 HECHT Exenso DS350E - Working length 3000 mm - Pivoting range 22.5° (inside) to 135° (outside) - right head moveable - Saw blade holder Ø 350 mm - incl. 1 pc center support. - Pneumatic clamping of the aggregates. - Positioning control Exenso DS3 with touch panel 15" display in the dust-proof monitor housing. - 3-axis control, 1 longitudinal axis and 2 swivel axes. - Input of the cutting data by hand - Processing data from a cutting list (data set by default) - Processing of measuring rod data (radio caliper GMF) - Ethernet port 10/100 (TCP/IP) - USB interface - incl. Control cabinet, motor and software licenses. Pos. 1.2 article number 942.5997 DS feed device pneumatic Pos. 1.3 article number 942.5236 DS workpiece clamping combined Combined workpiece clamping consisting of: Pneumatic swing clamp for clamping the material from above. (Free access to the work table) Pneumatic horizontal clamp - torsion-proof clamping cylinder with pressure piece. The clamps can be selected individually via the saw control. The clamping sequence can also be set via the control. Including safety preload pressure Scope of delivery: 1 swing clamp / 1 horizontal clamp Pos. 1.4 article number 723.0121 DS saw blade HM 350x3.0/2.2/30 Z 100 (wood G5) Helical/ helical/flat tooth - positive Pos. 1.5 article number 942.5201 ES / DS workpiece clamping from the front - 2 clamping cylinders secured against rotation - 2 cylinder holders with clamping lever Pos. 1.6 article number 942.5241 DS350 Table Pads Grooved "Standard" Pos. 1.7 article number 942.5237 DS Software "Excess length" (subsequent steps must be confirmed) Process control including hardware. After entering a cutting size > max. cutting length of the system, the cutting is cycled. (Left unit cuts, right unit shifts the material and cuts made to measure.) Article number 945.2007 Packaging DS350 (transport frame) ----------------------------------------------------- Total price in this version - on request! Options with extra charge on request: ----------------------------------- Article number 944.1023 GMF vernier caliper 3000mm complete set (1500mm plus extension 1500mm) including charger and receiver. A robust aluminum measuring bar with a measuring range of 3,000 mm ideal for measuring the glazing beads. functionality For use on doors and large window sashes, the vernier caliper GMF safely and quickly mechanically extended up to a measuring length of 3,000 mm will. Base length: 1,500 mm Extension: 1,500 mm, automatic detection Accuracy of ±0.1mm Resolution of 0.02mm. Measurement transmission via radio interface to the controller or to the PC. Microcontroller charger for battery pack 100-240V input voltage and Euro/UK/US/AUS power adapter. Article number 945.2006 Packaging GMF tube Ø220x2000 mm Article number 942.5241 DS350 Table Pads Grooved according to customer's sample The mounted table pads are made according to the customer's drawing milled Control by your window construction software: -------------------------------------- No problem: Hecht's software department will also help you with customization of your existing data record for transfer to the saw! Price based on effort, please ask us! For our new machine offers, please also note options such as Working length 4,000 mm Hydro-pneumatic saw feed (for aluminium) Spray device for aluminum saws radio measuring stick and much more! (Technical information according to the manufacturer - without guarantee!)
            Number of motors 2 Stück
            0 3000 mm
            Control ja/CNC
            loading dimensions L x W x H 4000 x 1500 x 1500 mm
            Weight 800 kg
            Description :
            HECHT double miter saw Exenso DS350E - 3000 mm
            -----------------------------------------------------

            For wooden glazing beads, sash bars, profile strips, aluminum strips, etc.

            Pos. 1.1 article number 942.5103
            HECHT Exenso DS350E
            - Working length 3000 mm
            - Pivoting range 22.5° (inside) to 135° (outside)
            - right head moveable
            - Saw blade holder Ø 350 mm
            - incl. 1 pc center support.
            - Pneumatic clamping of the aggregates.
            - Positioning control Exenso DS3 with touch panel 15" display in the
            dust-proof monitor housing.
            - 3-axis control, 1 longitudinal axis and 2 swivel axes.
            - Input of the cutting data by hand
            - Processing data from a cutting list (data set by default)
            - Processing of measuring rod data (radio caliper GMF)
            - Ethernet port 10/100 (TCP/IP)
            - USB interface
            - incl. Control cabinet, motor and software licenses.

            Pos. 1.2 article number 942.5997
            DS feed device pneumatic

            Pos. 1.3 article number 942.5236
            DS workpiece clamping combined
            Combined workpiece clamping consisting of:
            Pneumatic swing clamp for clamping the material from above.
            (Free access to the work table)
            Pneumatic horizontal clamp - torsion-proof clamping cylinder with pressure
            piece.
            The clamps can be selected individually via the saw control.
            The clamping sequence can also be set via the control.
            Including safety preload pressure
            Scope of delivery: 1 swing clamp / 1 horizontal clamp

            Pos. 1.4 article number 723.0121
            DS saw blade HM 350x3.0/2.2/30 Z 100 (wood G5)
            Helical/ helical/flat tooth - positive

            Pos. 1.5 article number 942.5201
            ES / DS workpiece clamping from the front
            - 2 clamping cylinders secured against rotation
            - 2 cylinder holders with clamping lever

            Pos. 1.6 article number 942.5241
            DS350 Table Pads Grooved "Standard"

            Pos. 1.7 article number 942.5237
            DS Software "Excess length" (subsequent steps must be confirmed)
            Process control including hardware. After entering a cutting size > max.
            cutting length of the system, the cutting is cycled. (Left unit
            cuts, right unit shifts the material and cuts
            made to measure.)

            Article number 945.2007
            Packaging DS350 (transport frame)
            -----------------------------------------------------
            Total price in this version - on request!

            Options with extra charge on request:
            -----------------------------------
            Article number 944.1023
            GMF vernier caliper 3000mm complete set (1500mm plus extension 1500mm)
            including charger and receiver.
            A robust aluminum measuring bar with a measuring range of 3,000 mm
            ideal for measuring the glazing beads.
            functionality
            For use on doors and large window sashes, the vernier caliper GMF
            safely and quickly mechanically extended up to a measuring length of 3,000 mm
            will.
            Base length: 1,500 mm
            Extension: 1,500 mm, automatic detection
            Accuracy of ±0.1mm
            Resolution of 0.02mm.
            Measurement transmission via radio interface to the controller or to the PC.
            Microcontroller charger for battery pack 100-240V input voltage and
            Euro/UK/US/AUS power adapter.

            Article number 945.2006
            Packaging GMF tube Ø220x2000 mm

            Article number 942.5241
            DS350 Table Pads Grooved according to customer's sample
            The mounted table pads are made according to the customer's drawing
            milled


            Control by your window construction software:
            --------------------------------------
            No problem: Hecht's software department will also help you with customization
            of your existing data record for transfer to the saw!
            Price based on effort, please ask us!

            For our new machine offers, please also note options such as
            Working length 4,000 mm
            Hydro-pneumatic saw feed (for aluminium)
            Spray device for aluminum saws
            radio measuring stick

            and much more!

            (Technical information according to the manufacturer - without guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Glazing bead sww RUCHSER RU-GL-45°


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6760 · Glazing bead sww

          RUCHSER - RU-GL-45° - - neu - ,

          Technical details
          Number of motors 2 Stück︱0 2380 mm︱Control ,
          RUCHSER RU-GL-45° ----------------------------------------------------- Glazing bead saw at the sliding work table Developed for cutting glazing beads in pairs on the sliding work table The RU-GL glazing bead saw is mounted on a sliding work table with Scanning and clamping device for two glazing beads. Cutting length min. 230 mm, max. 2380 mm. Left saw stuck right saw on carriage mounted to be moved manually. Pneumatic clamping device from above and from the side, safety two-hand operation. Saw motors 0.37 kW, voltage 400V. Sliding work table with felt pad, length with side shelf 3300 mm, Width 1400 mm, working height 800 - 1000 mm. Pneumatically lowerable Counter bearing for positioning the wings. Pos. 1: RU-GL double glass bead saw 45° on the RU-SA-3000 ----------------------------------------------------- for glazing beads up to 30 x 70 mm (W x H) !!!, Mounted on the sliding work table with scanning and Clamping device for two glazing beads. Cutting length min. 230 mm, max. 2380 mm. Left saw fixed, right saw on carriage manually movably mounted. Pneumatic clamping device from above and from the side, safety two-hand operation. Saw motors 0.37 kW, voltage 400V. Sliding work table with felt pad, length with side shelf 3300 mm, width 1400 mm, Working height 800 - 1000 mm. Pneumatically lowerable Counter bearing for positioning the wings. ----------------------------------------------------- Basic price in the above version: on request! ----------------------------------------------------- Ex works. Plus packaging and shipping and current Material cost surcharge of 6% of the gross price Options with additional costs: ----------------------------------------------------- Item 1.1 Set of shims for rebated glazing beads for RU-GLS-P45° and RU-GLS-ED45° Price request after checking the glazing beads. Depending on the number of glazing beads used, this can happen several sets of supplements are required. To determine the exact number to be able to we need profile drawings before order confirmation the glazing beads to be used. Surcharge: on request, after sending your glazing bead drawings Pos. 1.2 recording device for scanning gauge RU-GL for transferring the scanning dimensions to the saw with pneumatic installation. Surcharge: 539.00 euros Pos. 1.3 Feeler gauge for glazing beads, total length 2550 mm, max. scanning length approx. 2450 mm Gauge made of square profile with 2 fixed and 2 adjustable cams for scanning the glazing bead length Surcharge: 421.00 euros Pos. 1.4 Feeler gauge for glazing beads, overall length 1500 mm, max. scanning length approx. 1430 mm Gauge made of square profile with 2 fixed and 2 adjustable cams for scanning the glazing bead length Surcharge: 378.00 euros Pos. 1.5 operating time switching device for independent suction. Adjustable from 5 sec. up to 3 hours with each sawing process automatically becomes the set time sucked off. Will be repeated within the suction time sawn, the set suction time begins again from the beginning. Surcharge: 620.00 euros All prices in euros, net, plus statutory VAT (technical information according to the manufacturer, without guarantee!)
            Number of motors 2 Stück
            0 2380 mm
            Control ,
            Description :
            RUCHSER RU-GL-45°
            -----------------------------------------------------
            Glazing bead saw at the sliding work table

            Developed for cutting glazing beads in pairs on the sliding work table

            The RU-GL glazing bead saw is mounted on a sliding work table with
            Scanning and clamping device for
            two glazing beads. Cutting length min. 230 mm, max. 2380 mm. Left saw stuck
            right saw on carriage
            mounted to be moved manually. Pneumatic clamping device from above and from
            the side, safety two-hand operation. Saw motors 0.37 kW, voltage 400V.
            Sliding work table with felt pad, length with side shelf 3300 mm,
            Width 1400 mm, working height 800 - 1000 mm. Pneumatically lowerable
            Counter bearing for positioning the wings.

            Pos. 1: RU-GL double glass bead saw 45° on the RU-SA-3000
            -----------------------------------------------------

            for glazing beads up to 30 x 70 mm (W x H) !!!,
            Mounted on the sliding work table with scanning and
            Clamping device for two glazing beads.
            Cutting length min. 230 mm, max. 2380 mm.
            Left saw fixed, right saw on carriage manually
            movably mounted.
            Pneumatic clamping device from above and from
            the side, safety two-hand operation.
            Saw motors 0.37 kW, voltage 400V.
            Sliding work table with felt pad, length with
            side shelf 3300 mm, width 1400 mm,
            Working height 800 - 1000 mm. Pneumatically lowerable
            Counter bearing for positioning the wings.
            -----------------------------------------------------
            Basic price in the above version: on request!
            -----------------------------------------------------
            Ex works. Plus packaging and shipping and current
            Material cost surcharge of 6% of the gross price

            Options with additional costs:
            -----------------------------------------------------
            Item 1.1 Set of shims for rebated glazing beads
            for RU-GLS-P45° and RU-GLS-ED45°
            Price request after checking the glazing beads.
            Depending on the number of glazing beads used, this can happen
            several sets of supplements are required. To determine the exact number
            to be able to we need profile drawings before order confirmation
            the glazing beads to be used.
            Surcharge: on request, after sending your glazing bead drawings


            Pos. 1.2 recording device for scanning gauge
            RU-GL for transferring the scanning dimensions to the saw
            with pneumatic installation.
            Surcharge: 539.00 euros

            Pos. 1.3 Feeler gauge for glazing beads, total length
            2550 mm, max. scanning length approx. 2450 mm
            Gauge made of square profile with 2 fixed and
            2 adjustable cams for scanning the glazing bead length
            Surcharge: 421.00 euros

            Pos. 1.4 Feeler gauge for glazing beads, overall length
            1500 mm, max. scanning length approx. 1430 mm
            Gauge made of square profile with 2 fixed and
            2 adjustable cams for scanning the glazing bead length
            Surcharge: 378.00 euros

            Pos. 1.5 operating time switching device for
            independent suction.
            Adjustable from 5 sec. up to 3 hours with each sawing process
            automatically becomes the set time
            sucked off. Will be repeated within the suction time
            sawn, the set suction time begins
            again from the beginning.
            Surcharge: 620.00 euros


            All prices in euros, net, plus statutory VAT

            (technical information according to the manufacturer, without guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Glazing bead sww RUCHSER RU-GL-45°


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6761 · Glazing bead sww

          RUCHSER - RU-GL-45° - - neu - ,

          Technical details
          Number of motors 2 Stück︱0 2650 mm︱Control ,
          Ruchser RU-GLS-ED 45° glass bead saw -------------------------------------- Developed for cutting glazing beads in pairs The RU-GLS-ED45° double glazing bead saw must be adjusted to size manually. the Machine was designed for cutting glazing beads in pairs with a cutting angle of 45° and features a fixed and a movable saw unit. The manual length adjustment is equipped with an electrical digital display. It can cut lengths from 240mm - 2650mm be sawn. During the cutting process, the glazing beads with a pneumatic clamping device clamped from above and from the front to prevent tilting to prevent the glazing beads. Operation is via a safety two-hand operation Item 1: RU-GLS-ED45° double glazing bead saw ----------------------------------------------------- with manual measurement, for the pairwise Cutting glazing beads, cutting angle 45°. Manual length adjustment with electric Digital display, cutting length from 150 - 2650 mm. Pneumatic clamping device from above and from in front. Safety two-hand operation, saw blade diameter 250mm, length 3700mm, width 700mm, Voltage 400V ----------------------------------------------------- Basic price in the above version: on request! ----------------------------------------------------- Ex works. Plus packaging and shipping and current Material cost surcharge of 6% of the gross price Options with additional costs: ----------------------------------------------------- Item 1.1 Set of shims for rebated glazing beads for RU-GLS-P45° and RU-GLS-ED45° Price request after checking the glazing beads. Depending on the number of glazing beads used, this can happen several sets of supplements are required. To determine the exact number to be able to we need profile drawings before order confirmation the glazing beads to be used. Surcharge: on request, after sending your glazing bead drawings Pos. 1.2 recording device for scanning gauge RU-GL for transferring the scanning dimensions to the saw with pneumatic installation. Surcharge: 539.00 euros Pos. 1.3 Feeler gauge for glazing beads, total length 2550 mm, max. scanning length approx. 2450 mm Gauge made of square profile with 2 fixed and 2 adjustable cams for scanning the glazing bead length Surcharge: 421.00 euros Pos. 1.4 Feeler gauge for glazing beads, overall length 1500 mm, max. scanning length approx. 1430 mm Gauge made of square profile with 2 fixed and 2 adjustable cams for scanning the glazing bead length Surcharge: 378.00 euros Pos. 1.5 operating time switching device for independent suction. Adjustable from 5 sec. up to 3 hours with each sawing process automatically becomes the set time sucked off. Will be repeated within the suction time sawn, the set suction time begins again from the beginning. Surcharge: 620.00 euros All prices in euros, net, plus statutory VAT (technical information according to the manufacturer, without guarantee!)
            Number of motors 2 Stück
            0 2650 mm
            Control ,
            Description :
            Ruchser RU-GLS-ED 45° glass bead saw
            --------------------------------------

            Developed for cutting glazing beads in pairs

            The RU-GLS-ED45° double glazing bead saw must be adjusted to size manually. the
            Machine was designed for cutting glazing beads in pairs with a
            cutting angle of 45° and features a fixed and a
            movable saw unit. The manual length adjustment is equipped with
            an electrical digital display. It can cut lengths from 240mm - 2650mm
            be sawn. During the cutting process, the glazing beads with a
            pneumatic clamping device clamped from above and from the front to prevent
            tilting
            to prevent the glazing beads. Operation is via a safety
            two-hand operation


            Item 1: RU-GLS-ED45° double glazing bead saw
            -----------------------------------------------------
            with manual measurement, for the pairwise
            Cutting glazing beads, cutting angle 45°.
            Manual length adjustment with electric
            Digital display, cutting length from 150 - 2650 mm.
            Pneumatic clamping device from above and from
            in front. Safety two-hand operation, saw blade diameter
            250mm, length 3700mm, width 700mm,
            Voltage 400V
            -----------------------------------------------------
            Basic price in the above version: on request!
            -----------------------------------------------------
            Ex works. Plus packaging and shipping and current
            Material cost surcharge of 6% of the gross price

            Options with additional costs:
            -----------------------------------------------------
            Item 1.1 Set of shims for rebated glazing beads
            for RU-GLS-P45° and RU-GLS-ED45°
            Price request after checking the glazing beads.
            Depending on the number of glazing beads used, this can happen
            several sets of supplements are required. To determine the exact number
            to be able to we need profile drawings before order confirmation
            the glazing beads to be used.
            Surcharge: on request, after sending your glazing bead drawings


            Pos. 1.2 recording device for scanning gauge
            RU-GL for transferring the scanning dimensions to the saw
            with pneumatic installation.
            Surcharge: 539.00 euros

            Pos. 1.3 Feeler gauge for glazing beads, total length
            2550 mm, max. scanning length approx. 2450 mm
            Gauge made of square profile with 2 fixed and
            2 adjustable cams for scanning the glazing bead length
            Surcharge: 421.00 euros

            Pos. 1.4 Feeler gauge for glazing beads, overall length
            1500 mm, max. scanning length approx. 1430 mm
            Gauge made of square profile with 2 fixed and
            2 adjustable cams for scanning the glazing bead length
            Surcharge: 378.00 euros

            Pos. 1.5 operating time switching device for
            independent suction.
            Adjustable from 5 sec. up to 3 hours with each sawing process
            automatically becomes the set time
            sucked off. Will be repeated within the suction time
            sawn, the set suction time begins
            again from the beginning.
            Surcharge: 620.00 euros


            All prices in euros, net, plus statutory VAT

            (technical information according to the manufacturer, without guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Glazing bead sww STRIFFLER 2750 E


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6842 · Glazing bead sww

          STRIFFLER - 2750 E - - gebraucht - ja 0

          Technical details
          Number of motors 3 Stück︱0 2200 mm︱Control ja 0︱0 Ja 0︱Dimensions (L/W/H) 3400x800x1600 mm︱
          STRIFFLER double glass bead miter saw 2750 E --------------------------------- with electronic positioning device Cutting length in special version: 2200 mm Min. cutting length: 254 mm Saw feed is pneumatic, infinitely adjustable with oil brake cylinder Length adjustment by recirculating ball - threaded spindle - servo Motor drive and electric. Positioning device Cutting angles 90° and 45° against adjustable fixed stops, Intermediate positions adjustable according to scale. Clamping device from the front up to a maximum workpiece thickness of 65 mm Clamping device from the front and from above up to a maximum workpiece thickness of 65 mm up to a maximum workpiece height of 50 mm Connection for suction diameter 50 mm Electrical connection: 3 m cable for 380 volt, 6.0 amp plug. Electrical circuit: Control cabinet with main switch, push button for: Control on, saw motors, dead man button for 500 mm Danger area, EMERGENCY STOP, El. Pos. Device, connection cable Longitudinal drive: positioning motor 0.25 KW with brake, Travel speed 7 m/min. Saw blade drive: 2 x 1.1 KW three-phase motors 2,800 rpm via V-belt = 5,000 rpm Saw blades: HM equipped, D = 250 mm, bore 20 mm, Wing measuring stick Weight approx. 450 kg -------------------------------- Price of the above machine on request! -------------------------------- (technical data according to manufacturer - no guarantee!)
            Number of motors 3 Stück
            0 2200 mm
            Control ja 0
            0 Ja 0
            Dimensions (L/W/H) 3400x800x1600 mm
            Description :
            STRIFFLER double glass bead miter saw 2750 E
            ---------------------------------
            with electronic positioning device
            Cutting length in special version: 2200 mm
            Min. cutting length: 254 mm
            Saw feed is pneumatic, infinitely adjustable with oil brake cylinder
            Length adjustment by recirculating ball - threaded spindle - servo
            Motor drive and electric. Positioning device
            Cutting angles 90° and 45° against adjustable fixed stops,
            Intermediate positions adjustable according to scale.
            Clamping device from the front up to a maximum workpiece thickness of 65 mm
            Clamping device from the front and from above up to a maximum workpiece thickness of 65 mm
            up to a maximum workpiece height of 50 mm
            Connection for suction diameter 50 mm
            Electrical connection: 3 m cable for 380 volt, 6.0 amp plug.

            Electrical circuit: Control cabinet with main switch, push button
            for: Control on, saw motors, dead man button for 500 mm
            Danger area, EMERGENCY STOP, El. Pos. Device, connection cable

            Longitudinal drive: positioning motor 0.25 KW with brake,
            Travel speed 7 m/min.

            Saw blade drive: 2 x 1.1 KW three-phase motors 2,800 rpm
            via V-belt = 5,000 rpm

            Saw blades: HM equipped, D = 250 mm, bore 20 mm,

            Wing measuring stick

            Weight approx. 450 kg
            --------------------------------
            Price of the above machine on request!
            --------------------------------
            (technical data according to manufacturer - no guarantee!)




        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Glazing bead sww Wegoma -STRIMA 2750


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-2726 · Glazing bead sww

          Wegoma -STRIMA - 2750 - - gebraucht - ja

          Technical details
          Number of motors 2 Stück︱0 2800 mm︱Control ja
          Glass bead saw Striffler-Strima 2750 --------------------------------- Saw blade diameter: 250 mm Distance sawing max 90°: 2,800 mm Cutting height at 90°: 80 mm Cutting width: 2,200 mm Cutting height at 45°: 28 mm Distance sawing min. 90°: 260 mm Saw blades tilt up to: 45° Main engine: 1.1 kW Saw blades tiltable: Yes Pneumatic clamp: Yes Control: program control Execution: cutting from behind Width adjustment: electric motor Weight approx.: 400 kg CE mark: Yes Space requirement: Length: 3,250mm Width: 1,200 mm Height: 1,100mm --------------------------------- (technical data according to the manufacturer - no guarantee!)
            Number of motors 2 Stück
            0 2800 mm
            Control ja
            Description :
            Glass bead saw Striffler-Strima 2750
            ---------------------------------

            Saw blade diameter: 250 mm
            Distance sawing max 90°: 2,800 mm
            Cutting height at 90°: 80 mm
            Cutting width: 2,200 mm
            Cutting height at 45°: 28 mm
            Distance sawing min. 90°: 260 mm
            Saw blades tilt up to: 45°
            Main engine: 1.1 kW
            Saw blades tiltable: Yes
            Pneumatic clamp: Yes
            Control: program control
            Execution: cutting from behind
            Width adjustment: electric motor
            Weight approx.: 400 kg
            CE mark: Yes
            Space requirement:
            Length: 3,250mm
            Width: 1,200 mm
            Height: 1,100mm
            ---------------------------------

            (technical data according to the manufacturer - no guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

          TOP Manufacturer:

          RUCHSER - WEGOMA -STRIMA - STRIFFLER - HECHT -