European network of stockholding machinery dealers

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:

          Frame press

          Machinelist: Frame press


          Frame press

          used Window production: wood Frame press S&S Bavaria 2000 L - Video


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6794 · Frame press

          S&S - Bavaria 2000 L - Video - - Vorführpresse -

          Technical details
          Working width 4500 mm︱Working height 3000 mm︱Number of cylinders 6 St.︱Dimensions (L/W/H) 5600x1350x3550 mm︱Weight 3000 kg︱
          S&S frame press Bavaria 2000 L --------------------------------- With automatic pressing cycle + manual control for corner connections tenon + slots and dowel connection / mortised tenon, can be changed using a selector switch on the control cabinet. With basic equipment for the optional use of counter profiles if the sash is on loose part to be folded over. CE version Basic machine in the strongest welded frame, with thick-walled special hollow profiles. Guideways of the pressure bars for the press corners in a low-abrasion finish. Fast, smooth, manual width adjustment by ball-bearing carriage, fixation in 50 mm Hole grid, optional motorized width adjustment with with hydraulic clamping (surcharge). Height adjustment and pressing by long-stroke cylinder in one work cycle. Right-hand press corners with integrated horizontal cylinders, therefore none vertical positioning of the horizontal printing cylinders necessary, avoiding cylinder collisions. Abutments below in several positions on each most favorable insertion height adjustable. 3 KW compact hydraulic system with integrated Control block, variable pressure control from 20 - 120 bar, manometer Control via push button with separate control circuits for the vertical and horizontal press cylinders on a freely movable control panel. 2 vertical press cylinders, double-acting, stroke on Adjusted working height, piston diameter 60 mm Pressure force per cylinder max. 2100 kg 2 horizontal press cylinders, double-acting, 80 mm stroke, piston diameter 40 mm Pressure force per cylinder max. 1250 kg Abutment and pressure plate depth 100 mm Control cabinet on the machine base on the left, 400 volts, 50 Hz Machine with ready-to-connect plug 16 A Paint finish: RAL 7035 light gray with RAL 7016 anthracite grey Working size: length x height = 4,500 mm x 2,750 mm A notice: actual working size: 4,500 x 3,000 mm (length x height= Space required: 5,600 mm x 1,350 mm x 3,550 mm (length x width x height) Item 0000127 ------------------------ Press height modification 2750/3000 mm a The machine is supplied with a 3,000 mm high pressure bar The cylinder attachment and the positions of the lower press corners however, correspond to the version with a press height of 2,750 mm. By installing 3 pieces of 300 mm long piston rod extensions the max. pressing height can be increased to 3,000 mm. Using the tools provided, it is possible to convert the Machine possible within approx. 10 minutes. Insertion heights: - lower insertion height for sashes with width <550 mm; approx. 1280 mm - Insertion height upper edge of upper horizontal frame wood up to pressing height 2,750mm; approx. 1,620 mm - Insertion height upper edge of upper horizontal frame wood pressing height >2,750mm; approx. 1,920 mm (piston rod extension installed) Scope of delivery: 1 piece support plate 3 piston rod extensions 300 mm 1 open-end wrench size 30 1 ratchet with socket wrench size. 24 1 piece holder for piston rod extensions and tool Hints: - The height is corrected for machines with a positioning function by parameter switching. Operation of the machine with the built-in piston rod extensions is replaced by another wallpaper displayed. - Total height of the machine approx. 3,400 mm Item 00001147 ------------------------ 1 medium pressure bar complete with pressure cylinder, Pressure hose and shut-off valve up to 3,000 mm high Item 00000471 ------------------------ Individual pressure control for medium pressure bar, Pressure control range up to max. 100 bar (For pressing crossbar windows) Item 00000112 ----------------------- infinitely height-adjustable transverse pressure device, complete with pressure cylinder and abutment, Throttle and shut-off valve Item 00000481 ------------------------ Individual pressure control for transverse pressure device Pressure control range up to max. 100 bar (For pressing crossbar windows) Item 000000391 --------------------------------------- Shut-off valve on the 3rd vertical cylinder Item 00000391 ----------------------- Shut-off valve on the upper horizontal cylinder Item 00001005 ------------------------ 3 x inclined window controls for vertical cylinders Item 00000302 ----------------------- 3x pendulum pressure plates attachable for pressing up to 60 degrees Item 00000631 ----------------------- double pendulum pressure plate for pointed windows (triangle) Item 00000113 ----------------------- 2 x extension for pendulum pressure plate for pointed windows (triangle) Item 00000057 ----------------------- Intermediate allowance for small dimension pressing for bridging the 1st pressure bar, including shut-off valve on the 1st vertical cylinder Item 00000100 ----------------------- Motorized width adjustment with digital display Item 00001001 ----------------------- Machine equipped for pressing of "tenons + slots" and additional pressing cycle for pressing "dowel connection" or "Plugtec", changeable via selector switch on the control cabinet Item 00001003 ----------------------- Basic equipment for counter profiles Item 00000632 ----------------------- Electronic pressure preselection device For 4 different, permanently programmed pressure levels (can be changed at any time), and an additional freely selectable one Pressure level directly on the control panel Item 00001002 ----------------------- 6x printing unit support and printing plate depth 120 mm Item 00099000 ----------------------- all pressure plates and abutments covered with plastic --------------------------------- Total price in the above version: on request! Options with additional prices: ----------------------- Item 00001004 ----------------------- Counter profiles, price per piece: 260.00 euros Further options such as other working dimensions on request! (Technical information according to the manufacturer - without guarantee! Illustrations may be dated Deviate from the original, prices net, plus VAT (domestic))
            Working width 4500 mm
            Working height 3000 mm
            Number of cylinders 6 St.
            Dimensions (L/W/H) 5600x1350x3550 mm
            Weight 3000 kg
            Description :
            S&S frame press Bavaria 2000 L
            ---------------------------------

            With automatic pressing cycle + manual control
            for corner connections tenon + slots and dowel connection / mortised tenon,
            can be changed using a selector switch on the control cabinet.
            With basic equipment for the optional use of counter profiles if the sash is on
            loose part to be folded over.

            CE version
            Basic machine in the strongest welded frame,
            with thick-walled special hollow profiles.
            Guideways of the pressure bars for the press corners
            in a low-abrasion finish.

            Fast, smooth, manual width adjustment
            by ball-bearing carriage, fixation in 50 mm
            Hole grid, optional motorized width adjustment with
            with hydraulic clamping (surcharge).

            Height adjustment and pressing by long-stroke cylinder
            in one work cycle. Right-hand press corners with
            integrated horizontal cylinders, therefore none
            vertical positioning of the horizontal printing cylinders
            necessary, avoiding cylinder collisions.
            Abutments below in several positions on each
            most favorable insertion height adjustable.

            3 KW compact hydraulic system with integrated
            Control block, variable pressure control
            from 20 - 120 bar, manometer

            Control via push button with separate control circuits
            for the vertical and horizontal press cylinders
            on a freely movable control panel.

            2 vertical press cylinders, double-acting, stroke on
            Adjusted working height, piston diameter 60 mm
            Pressure force per cylinder max. 2100 kg
            2 horizontal press cylinders, double-acting,
            80 mm stroke, piston diameter 40 mm
            Pressure force per cylinder max. 1250 kg
            Abutment and pressure plate depth 100 mm

            Control cabinet on the machine base on the left, 400 volts, 50 Hz
            Machine with ready-to-connect plug 16 A

            Paint finish: RAL 7035 light gray with RAL 7016 anthracite grey

            Working size: length x height = 4,500 mm x 2,750 mm
            A notice:
            actual working size: 4,500 x 3,000 mm (length x height=
            Space required: 5,600 mm x 1,350 mm x 3,550 mm (length x width x height)

            Item 0000127
            ------------------------
            Press height modification 2750/3000 mm a
            The machine is supplied with a 3,000 mm high pressure bar
            The cylinder attachment and the positions of the lower press corners
            however, correspond to the version with a press height of 2,750 mm.
            By installing 3 pieces of 300 mm long piston rod extensions
            the max. pressing height can be increased to 3,000 mm.
            Using the tools provided, it is possible to convert the
            Machine possible within approx. 10 minutes.

            Insertion heights:
            - lower insertion height for sashes with width <550 mm; approx. 1280 mm
            - Insertion height upper edge of upper horizontal frame wood up to pressing
            height
            2,750mm; approx. 1,620 mm
            - Insertion height upper edge of upper horizontal frame wood pressing height
            >2,750mm; approx. 1,920 mm (piston rod extension installed)

            Scope of delivery:
            1 piece support plate
            3 piston rod extensions 300 mm
            1 open-end wrench size 30
            1 ratchet with socket wrench size. 24
            1 piece holder for piston rod extensions and tool

            Hints:
            - The height is corrected for machines with a positioning function
            by parameter switching. Operation of the machine with the
            built-in piston rod extensions is replaced by another
            wallpaper displayed.

            - Total height of the machine approx. 3,400 mm

            Item 00001147
            ------------------------
            1 medium pressure bar complete with pressure cylinder,
            Pressure hose and shut-off valve up to 3,000 mm high

            Item 00000471
            ------------------------
            Individual pressure control for medium pressure bar,
            Pressure control range up to max. 100 bar
            (For pressing crossbar windows)

            Item 00000112
            -----------------------
            infinitely height-adjustable transverse pressure device,
            complete with pressure cylinder and abutment,
            Throttle and shut-off valve

            Item 00000481
            ------------------------
            Individual pressure control for transverse pressure device
            Pressure control range up to max. 100 bar
            (For pressing crossbar windows)

            Item 000000391
            ---------------------------------------
            Shut-off valve on the 3rd vertical cylinder

            Item 00000391
            -----------------------
            Shut-off valve on the upper horizontal cylinder


            Item 00001005
            ------------------------
            3 x inclined window controls for vertical cylinders

            Item 00000302
            -----------------------
            3x pendulum pressure plates attachable
            for pressing up to 60 degrees

            Item 00000631
            -----------------------
            double pendulum pressure plate
            for pointed windows (triangle)

            Item 00000113
            -----------------------
            2 x extension for pendulum pressure plate
            for pointed windows (triangle)

            Item 00000057
            -----------------------
            Intermediate allowance for small dimension pressing
            for bridging the 1st pressure bar,
            including shut-off valve on the 1st vertical cylinder

            Item 00000100
            -----------------------
            Motorized width adjustment with digital display

            Item 00001001
            -----------------------
            Machine equipped for pressing
            of "tenons + slots" and additional pressing cycle
            for pressing "dowel connection" or
            "Plugtec", changeable via selector switch on the control cabinet

            Item 00001003
            -----------------------
            Basic equipment for counter profiles

            Item 00000632
            -----------------------
            Electronic pressure preselection device
            For 4 different, permanently programmed pressure levels
            (can be changed at any time), and an additional freely selectable one
            Pressure level directly on the control panel

            Item 00001002
            -----------------------
            6x printing unit support and printing plate depth 120 mm

            Item 00099000
            -----------------------
            all pressure plates and abutments covered with plastic

            ---------------------------------
            Total price in the above version: on request!


            Options with additional prices:
            -----------------------

            Item 00001004
            -----------------------
            Counter profiles, price per piece: 260.00 euros

            Further options such as other working dimensions on request!

            (Technical information according to the manufacturer - without guarantee!
            Illustrations may be dated
            Deviate from the original, prices net, plus VAT (domestic))


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Frame press S&S RP 2000


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6792 · Frame press

          S&S - RP 2000 - - Vorführmaschine -

          Technical details
          Working width 4000 mm︱Working height 2600 mm︱Number of cylinders 6 St.︱Dimensions (L/W/H) 5300 x 1250 x 3330 mm︱
          S&S frame press type RP 2000, ----------------------------- C E - version Stable frame welded construction made of thick-walled special hollow profiles, Sliding carriage and pressure bar with 50 mm hole pattern. Continuous abutment on the left for width compression, lower abutment in two levels. Vertical press cylinder on special pressure bar with one-hand quick adjustment with weight compensation in the 50 mm hole pattern, height-adjustable, long Sliding carriages ensure the permanent absorption of high pressing forces. Fast, smooth width adjustment with ball-bearing carriage Central locking, fixation in 50 mm hole pattern. Upper horizontal press cylinder infinitely adjustable in height and with Equipped with counterbalance. Lower horizontal press cylinder with center holes for the two Abutment levels, with weight compensation. Abutment and pressure plate depth 100 mm Printing plate and support width 130 mm Machine electro-hydraulically controlled, with 2 vertical pressure cylinders d = 50 mm, stroke 120 mm double-acting, with counterweight and One-hand quick adjustment, 2 pieces Horizontal pressure cylinders d = 40 mm, stroke 120 mm double-acting, with weight balancing; 2 manual control valves, Pressure gauge, 1 pressure control valve from 20 to 125 bar corresponds to 400 to 2400 kg pressure vertical, with 3 kW three-phase motor for 400 volts, 50 Hz operating voltage. Complete with electrical connection. Paint finish: RAL 7035 light gray with RAL 7016 anthracite grey Working size: 4000mm x 2600mm (length x height) Required space: 5300 x 1250 x 3330 mm (L x W x H) Machine including the following options: -------------------------------------- Article 00000374 1.00 pc Medium pressure bar with pressure cylinder double-acting, weight compensation, pressure hose and shut-off valve up to 2600 mm high Article 00000047 1.00 pc Individual pressure control for medium pressure bar, Pressure control range up to max. 100 bar (for pressing crossbar windows) Article 00000038 1.00 pc Cross printing device complete with pressure cylinder double-acting, weight compensation, pressure hose and shut-off valve There is no weight compensation on the lower horizontal cylinder Article 00000048 1.00 pc Individual pressure control for transverse pressure device, Pressure control range up to max. 100 bar (for pressing crossbar windows) Article 00000039 1.00 pc Shut-off valve on the 3rd vertical cylinder Article 00000039 1.00 pc Shut-off valve on the upper horizontal cylinder Article 00000050 1.00 pc Width allowance for compression of small frames to bridge the 1st pressure beam, including shut-off valve on the 1st vertical cylinder Article 00003117 1.00 pc Basic equipment for counter profiles The space required in height increases by 100 mm Item 00099000 All pressure plates and abutments covered with plastic Article 00000049 1.00 pc Triangle studio window pressing device consisting of: locking device of Vertical pressure bar and 3 attachable, side-guided pendulum pressure plates Article 00000063 1.00 pc double pendulum pressure plate for pointed windows (triangle) -------------------------------------- Total price in the above version ex works: On request! -------------------------------------- Options: Article 00000042 1.00 pc Machine that can be dismantled i.e. H. Pressure bar on pallet -------------------------------------- Further options such as other working dimensions on request! (Technical information according to the manufacturer - without guarantee! Illustrations may be dated Deviate from the original, prices net, plus VAT (domestic))
            Working width 4000 mm
            Working height 2600 mm
            Number of cylinders 6 St.
            Dimensions (L/W/H) 5300 x 1250 x 3330 mm
            Description :
            S&S frame press type RP 2000,
            -----------------------------
            C E - version
            Stable frame welded construction made of thick-walled special hollow profiles,
            Sliding carriage and pressure bar with 50 mm hole pattern.
            Continuous abutment on the left for width compression, lower abutment
            in two levels.
            Vertical press cylinder on special pressure bar with one-hand quick adjustment
            with weight compensation in the 50 mm hole pattern, height-adjustable, long
            Sliding carriages ensure the
            permanent absorption of high pressing forces.
            Fast, smooth width adjustment with ball-bearing carriage
            Central locking, fixation in 50 mm hole pattern.
            Upper horizontal press cylinder infinitely adjustable in height and with
            Equipped with counterbalance.
            Lower horizontal press cylinder with center holes for the two
            Abutment levels, with weight compensation.
            Abutment and pressure plate depth 100 mm
            Printing plate and support width 130 mm
            Machine electro-hydraulically controlled, with 2 vertical pressure cylinders d =
            50 mm, stroke 120 mm double-acting, with counterweight and
            One-hand quick adjustment, 2 pieces
            Horizontal pressure cylinders d = 40 mm, stroke 120 mm double-acting, with
            weight balancing; 2 manual control valves,
            Pressure gauge, 1 pressure control valve from 20 to 125 bar corresponds to 400
            to 2400 kg
            pressure
            vertical, with 3 kW three-phase motor for 400 volts, 50 Hz operating voltage.
            Complete with electrical connection.
            Paint finish: RAL 7035 light gray with RAL 7016 anthracite grey

            Working size: 4000mm x 2600mm (length x height)
            Required space: 5300 x 1250 x 3330 mm (L x W x H)

            Machine including the following options:
            --------------------------------------

            Article 00000374 1.00 pc
            Medium pressure bar with pressure cylinder
            double-acting, weight compensation,
            pressure hose and shut-off valve
            up to 2600 mm high

            Article 00000047 1.00 pc
            Individual pressure control for medium pressure bar,
            Pressure control range up to max. 100 bar
            (for pressing crossbar windows)

            Article 00000038 1.00 pc
            Cross printing device complete with pressure cylinder
            double-acting, weight compensation, pressure hose
            and shut-off valve
            There is no weight compensation on the lower horizontal cylinder

            Article 00000048 1.00 pc
            Individual pressure control for transverse pressure device,
            Pressure control range up to max. 100 bar
            (for pressing crossbar windows)

            Article 00000039 1.00 pc
            Shut-off valve on the 3rd vertical cylinder

            Article 00000039 1.00 pc
            Shut-off valve on the upper horizontal cylinder

            Article 00000050 1.00 pc
            Width allowance for compression
            of small frames to bridge the
            1st pressure beam, including shut-off valve on the 1st vertical cylinder

            Article 00003117 1.00 pc
            Basic equipment for counter profiles
            The space required in height increases by 100 mm

            Item 00099000
            All pressure plates and abutments
            covered with plastic

            Article 00000049 1.00 pc
            Triangle studio window pressing device
            consisting of: locking device of
            Vertical pressure bar and 3 attachable, side-guided pendulum pressure plates

            Article 00000063 1.00 pc
            double pendulum pressure plate
            for pointed windows (triangle)

            --------------------------------------

            Total price in the above version ex works: On request!

            --------------------------------------
            Options:
            Article 00000042 1.00 pc
            Machine that can be dismantled
            i.e. H. Pressure bar on pallet
            --------------------------------------

            Further options such as other working dimensions on request!

            (Technical information according to the manufacturer - without guarantee!
            Illustrations may be dated
            Deviate from the original, prices net, plus VAT (domestic))


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Frame press S&S Multipress Lochplattenpresse


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-5956 · Frame press

          S&S - Multipress Lochplattenpresse - - neu -

          Technical details
          Working width 3500 mm︱Working height 2650 mm︱Number of cylinders nach Wahl St.︱
            Working width 3500 mm
            Working height 2650 mm
            Number of cylinders nach Wahl St.


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Frame press S&S RP 2000


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-5845 · Frame press

          S&S - RP 2000 - - neu -

          Technical details
          Working width 3500 mm︱Working height 2300 mm︱Number of cylinders 4 St.︱
            Working width 3500 mm
            Working height 2300 mm
            Number of cylinders 4 St.


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Frame press S&S Super-Video


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6121 · Frame press

          S&S - Super-Video - - neu -

          Technical details
          Working width 3500 mm︱Working height 2300 mm︱Number of cylinders 4 St.︱
            Working width 3500 mm
            Working height 2300 mm
            Number of cylinders 4 St.


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Frame press S&S Bavaria 2000 L  -Video


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6496 · Frame press

          S&S - Bavaria 2000 L -Video - - neu -

          Technical details
          Working width 4000 mm︱Working height 2600 mm︱Number of cylinders 5 St.︱weight 2000 kg︱Dimensions (L/W/H) 5550x1300x3000 mm︱
            Working width 4000 mm
            Working height 2600 mm
            Number of cylinders 5 St.
            weight 2000 kg
            Dimensions (L/W/H) 5550x1300x3000 mm
            Description :



        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Frame press S&S T 35


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6030 · Frame press

          S&S - T 35 - - neu -

          Technical details
          Working width 3500 mm︱Working height 2300 mm︱Number of cylinders 4 St.︱
          Stable frame welded construction of thick-walled Special hollow profiles , sliding table and pressure beam with 50 mm hole pattern . On the left side continuous abutment for grouting the wide , lower abutment in 2 levels. Vertical pressing cylinder on specialty bar with one- quick adjustment with weight compensation in the 50 mm hole pattern adjustable in height. Long sliding table ensure the continuous recording of high jacking forces . Fast, smooth width adjustment with ball bearing Carriage with central fixation in 50 mm hole pattern. Upper horizontal press cylinder infinitely adjustable in height and equipped with counterbalance . Lower horizontal pressing cylinders with bore for two abutments levels without weight compensation . Abutment and pressure plate depth 100 mm Machine controlled electro -hydraulic with 2 pieces vertical pressure cylinders d = 60 mm, stroke 120 mm, single-acting, with counterbalance and One-hand height adjustment, 2 piece horizontal pressure cylinders d = 40 mm stroke, 120 mm single-acting ( 1 x with weight compensation ), 2 hand control valves , Pressure gauge, pressure regulator valve 1 of 20 to 150 bar corresponds to 550 4200 kg compression force vertically. With 3 kW three-phase motor for 400 volts , 50 Hz Operating voltage. Complete with electrical connection . Painting RAL 7035 anthracite gray with light gray RAL 7016 . (technical details according to manufacturer - without guarantee ! ) The detailed technical description can be found in the attached pdf file
            Working width 3500 mm
            Working height 2300 mm
            Number of cylinders 4 St.
            Description :
            Stable frame welded construction of thick-walled
            Special hollow profiles , sliding table and pressure beam with
            50 mm hole pattern .

            On the left side continuous abutment for grouting the wide ,
            lower abutment in 2 levels.

            Vertical pressing cylinder on specialty bar with one-
            quick adjustment with weight compensation in the 50 mm hole pattern
            adjustable in height. Long sliding table ensure the
            continuous recording of high jacking forces .

            Fast, smooth width adjustment with ball bearing
            Carriage with central fixation in 50 mm hole pattern.

            Upper horizontal press cylinder infinitely adjustable in height and
            equipped with counterbalance .

            Lower horizontal pressing cylinders with bore for
            two abutments levels without weight compensation .

            Abutment and pressure plate depth 100 mm

            Machine controlled electro -hydraulic with 2 pieces vertical pressure cylinders
            d = 60 mm, stroke 120 mm, single-acting, with counterbalance and
            One-hand height adjustment, 2 piece horizontal pressure cylinders d = 40 mm
            stroke,
            120 mm single-acting ( 1 x with weight compensation ), 2 hand control valves ,
            Pressure gauge, pressure regulator valve 1 of 20 to 150 bar corresponds to 550
            4200 kg compression force vertically. With 3 kW three-phase motor for 400
            volts , 50 Hz
            Operating voltage.

            Complete with electrical connection .

            Painting RAL 7035 anthracite gray with light gray RAL 7016 .

            (technical details according to manufacturer - without guarantee ! )

            The detailed technical description can be found in the attached pdf file


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Frame press SCHAFBERGER + SPROEDHUBER RP 1200


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6803 · Frame press

          SCHAFBERGER + SPROEDHUBER - RP 1200 - - gebraucht -

          Technical details
          Working width 3550 mm︱Working height 2250 mm︱Number of cylinders 5 St.︱
          S+S hydraulic frame press RP 1200 ------------------------------------- Working width 3,550 mm Working height 2,250 mm ------------------------------------- with medium pressure beam ------------------------------------- still in use ------------------------------------- Technical information according to the manufacturer - without guarantee!)
            Working width 3550 mm
            Working height 2250 mm
            Number of cylinders 5 St.
            Description :
            S+S hydraulic frame press RP 1200
            -------------------------------------
            Working width 3,550 mm
            Working height 2,250 mm
            -------------------------------------
            with medium pressure beam
            -------------------------------------
            still in use
            -------------------------------------

            Technical information according to the manufacturer - without guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • 2.000 €
          Datasheet
          Request / Contact
          used Window production: wood Frame press HESS Speedy Video


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-2719 · Frame press

          HESS - Speedy Video - - gebraucht -

          Technical details
          Working width 3550 mm︱Working height 2250 mm︱Number of cylinders 5 St.︱loading dimensions L x W x H 4500 x 900 x 2600 mm︱
          Hess Speedy frame press -------------------------------------- Press will be checekd Insertion dimension / pressing length max. 3,550 mm Insertion dimension / pressing height max. 2,250 mm Sliding carriage for width adjustment locking in 50 mm Double hole grid system Electric height adjustment of the long-stroke cylinders (hydraulic) Insertion height of the abutment plates can be preselected in 4 positions 3 vertical printing cylinders stroke 1000 mm Pressure force per cylinder 2000 kN / 20000 N 2 horizontal printing cylinders stroke 80 mm Pressure force per cylinder 1250 kN / 12500 N Printing plate depth 100 mm width 140 mm Grid for cylinder fixation/rear bearing 50 mm Medium pressure beam with shut-off valve Final pressure switch-off and pressure control Control and pressing process in touch button operation Adjustable pressing pressure min. 25 – max. 160 bar Electrical connection 2.2 kW / 400V Control for studio window gluing 2 pendulum pressure plates 45 degrees Machine dimensions W=4500 mm, D=900 mm, H=2600 mm Weight approx. 1800 kg Photo and video not original, shows press of same type. (technical data according to the manufacturer - no guarantee!)
            Working width 3550 mm
            Working height 2250 mm
            Number of cylinders 5 St.
            loading dimensions L x W x H 4500 x 900 x 2600 mm
            Description :
            Hess Speedy frame press
            --------------------------------------
            Press will be checekd

            Insertion dimension / pressing length max. 3,550 mm
            Insertion dimension / pressing height max. 2,250 mm


            Sliding carriage for width adjustment locking in 50 mm
            Double hole grid system

            Electric height adjustment of the long-stroke cylinders (hydraulic)

            Insertion height of the abutment plates can be preselected in 4 positions

            3 vertical printing cylinders stroke 1000 mm
            Pressure force per cylinder 2000 kN / 20000 N

            2 horizontal printing cylinders stroke 80 mm
            Pressure force per cylinder 1250 kN / 12500 N

            Printing plate depth 100 mm width 140 mm

            Grid for cylinder fixation/rear bearing 50 mm

            Medium pressure beam with shut-off valve

            Final pressure switch-off and pressure control

            Control and pressing process in touch button operation

            Adjustable pressing pressure min. 25 – max. 160 bar

            Electrical connection 2.2 kW / 400V

            Control for studio window gluing

            2 pendulum pressure plates 45 degrees

            Machine dimensions W=4500 mm, D=900 mm, H=2600 mm
            Weight approx. 1800 kg

            Photo and video not original, shows press of same type.

            (technical data according to the manufacturer - no guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Frame press HESS Quickstep_Video


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-2701 · Frame press

          HESS - Quickstep_Video - - gebraucht - Siemens S7-1200

          Technical details
          Working width 3500 mm︱Working height 2250 mm︱Number of cylinders 5 St.︱control Siemens S7-1200
          #2701 Hess Quickstep frame press -------------------------------------- Technical data summary (please inquire about any additional accessories included) -------------------------------------- Generally -------------------------------------- Working width: 3500 mm Working height: 2250 mm Total power requirement: 3 kW Installation dimensions: 4500x980x2610 mm Loading dimensions: 4500 x 980 x 2610 mm Machine weight, approx.: 2000 kg Characteristics: -------------------------------------- > hydraulic: yes > Number of vertical press cylinders: 3 > Number of horizontal press cylinders: 2 > Vertical adjustment type: electric (long-stroke cylinder) > Horizontal adjustment type: electrical > 1 medium pressure bar > Printing plate depth 100mm width 140mm > 3 pcs. pendulum pressure plates > 1 piece small parts allowance Other features -------------------------------------- Opto-electronics, i.e. fully automatic measurement and setting, horizontal Siemens S7-1200 control (technical information according to the manufacturer - no guarantee!) Pictures and video show the original press stock number 2701.
            Working width 3500 mm
            Working height 2250 mm
            Number of cylinders 5 St.
            control Siemens S7-1200
            Description :
            #2701 Hess Quickstep frame press
            --------------------------------------

            Technical data summary
            (please inquire about any additional accessories included)
            --------------------------------------

            Generally
            --------------------------------------
            Working width: 3500 mm
            Working height: 2250 mm
            Total power requirement: 3 kW
            Installation dimensions: 4500x980x2610 mm
            Loading dimensions: 4500 x 980 x 2610 mm
            Machine weight, approx.: 2000 kg

            Characteristics:
            --------------------------------------
            > hydraulic: yes
            > Number of vertical press cylinders: 3
            > Number of horizontal press cylinders: 2
            > Vertical adjustment type: electric (long-stroke cylinder)
            > Horizontal adjustment type: electrical
            > 1 medium pressure bar
            > Printing plate depth 100mm width 140mm
            > 3 pcs. pendulum pressure plates
            > 1 piece small parts allowance

            Other features
            --------------------------------------
            Opto-electronics, i.e. fully automatic measurement
            and setting, horizontal

            Siemens S7-1200 control

            (technical information according to the manufacturer - no guarantee!)

            Pictures and video show the original press stock number 2701.


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Frame press HESS Speedy, 2 Mitteldruckbalken


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-2730 · Frame press

          HESS - Speedy, 2 Mitteldruckbalken - - gebraucht -

          Technical details
          Working width 3050 mm︱Working height 2050 mm︱Number of cylinders 6 St.︱Dimensions (L/W/H) 3970x950x2400 mm︱
          Hess Speedy frame press with 2 medium pressure beams! -------------------------------------- Insertion dimension / pressing length max. 3,050 mm Insertion dimension / pressing height max. 2,050 mm Sliding carriage for width adjustment locking in 50 mm Double hole grid system Electric height adjustment of the long-stroke cylinders (hydraulic) Insertion height of the abutment plates can be preselected in 4 positions 4 vertical printing cylinders stroke 1000 mm Pressure force per cylinder 2000 kN / 20000 N 2 horizontal printing cylinders stroke 80 mm Pressure force per cylinder 1250 kN / 12500 N Grid for cylinder fixation/rear bearing 50 mm Medium pressure beam with shut-off valve Final pressure switch-off and pressure control Control and pressing process in touch button operation Adjustable pressing pressure min. 25 – max. 160 bar Electrical connection 3.0 kW / 400V Machine dimensions W=3970 mm, D=950 mm, H=2400 mm Weight approx. 1680 kg Machine is currently being checked - picture not original, shows same model. Video shows press from our archive (technical data according to the manufacturer - no guarantee!)
            Working width 3050 mm
            Working height 2050 mm
            Number of cylinders 6 St.
            Dimensions (L/W/H) 3970x950x2400 mm
            Description :
            Hess Speedy frame press with 2 medium pressure beams!
            --------------------------------------

            Insertion dimension / pressing length max. 3,050 mm
            Insertion dimension / pressing height max. 2,050 mm


            Sliding carriage for width adjustment locking in 50 mm
            Double hole grid system

            Electric height adjustment of the long-stroke cylinders (hydraulic)

            Insertion height of the abutment plates can be preselected in 4 positions

            4 vertical printing cylinders stroke 1000 mm
            Pressure force per cylinder 2000 kN / 20000 N

            2 horizontal printing cylinders stroke 80 mm

            Pressure force per cylinder 1250 kN / 12500 N

            Grid for cylinder fixation/rear bearing 50 mm

            Medium pressure beam with shut-off valve

            Final pressure switch-off and pressure control

            Control and pressing process in touch button operation

            Adjustable pressing pressure min. 25 – max. 160 bar

            Electrical connection 3.0 kW / 400V

            Machine dimensions W=3970 mm, D=950 mm, H=2400 mm
            Weight approx. 1680 kg

            Machine is currently being checked - picture not original, shows same model.
            Video shows press from our archive

            (technical data according to the manufacturer - no guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Frame press CASOLIN Euro


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6821 · Frame press

          CASOLIN - Euro - - 2010 -

          Technical details
          Working width 6000 mm︱Working height 3000 mm︱Number of cylinders 4 St.︱loading dimensions L x W x H 7.175 x 1.600 x 3.790 mm︱weight 3700 kg︱
          Casolin Euro ------------------------- HYDRAULIC FRAME PRESS FOR WINDOWS AND DOORS CASOLIN MOD. "EURO" Frame press in an extremely stable steel construction. The machine also allows the pressing of already milled wing and frame parts. Working dimensions: 6000mm x 3000mm Installation dimensions: Total length: approx. 7,175 mm Installation height approx.: 3,790 mm + 340 mm (cylinders look when pressed maximum pressing height above) = 4,130 mm Loading dimensions: Length: approx. 7,175 mm Height: approx. 3,790 mm Weight: approx. 3,700 kg (technical data according to the manufacturer - no guarantee!)
            Working width 6000 mm
            Working height 3000 mm
            Number of cylinders 4 St.
            loading dimensions L x W x H 7.175 x 1.600 x 3.790 mm
            weight 3700 kg
            Description :
            Casolin Euro
            -------------------------
            HYDRAULIC FRAME PRESS FOR WINDOWS AND DOORS CASOLIN MOD. "EURO"

            Frame press in an extremely stable steel construction. The machine also allows
            the pressing of already milled wing and frame parts.

            Working dimensions: 6000mm x 3000mm

            Installation dimensions:
            Total length: approx. 7,175 mm
            Installation height approx.: 3,790 mm + 340 mm (cylinders look when pressed
            maximum pressing height above) = 4,130 mm

            Loading dimensions:
            Length: approx. 7,175 mm
            Height: approx. 3,790 mm
            Weight: approx. 3,700 kg

            (technical data according to the manufacturer - no guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • 20.000 €
          Datasheet
          Request / Contact
          used Window production: wood Frame press MAWEG Euronova Qickomat


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6822 · Frame press

          MAWEG - Euronova Qickomat - - 1996 -

          Technical details
          Working width 3648 mm︱Working height 2485 mm︱Number of cylinders 6 St.︱
          Maweg Euronova Quickomat frame press ---------------------------- with automatic measurement adjustment. Cylinder max. opened (maximum working dimensions) W 3,648mm x H 2,485mm Total length: 4,720mm + 400mm control unit Total height: 3,550 mm (technical information according to the manufacturer - no guarantee!)
            Working width 3648 mm
            Working height 2485 mm
            Number of cylinders 6 St.
            Description :
            Maweg Euronova Quickomat frame press
            ----------------------------
            with automatic measurement adjustment.

            Cylinder max. opened (maximum working dimensions)
            W 3,648mm x H 2,485mm

            Total length: 4,720mm + 400mm control unit
            Total height: 3,550 mm

            (technical information according to the manufacturer - no guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Frame press MAWEG HILDEBRAND Euro-Z


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6810 · Frame press

          MAWEG HILDEBRAND - Euro-Z - - 1990 -

          Technical details
          Working width 3250 mm︱Working height 2300 mm︱Number of cylinders 7 St.︱Dimensions (L/W/H) 4400 x 1050 x 3200 mm︱loading dimensions L x W x H 4400 x 1050 x 2950 mm︱
          Maweg Hildebrand frame press EURO-Z -------------------------------------- Press with 2 medium pressure beams! External dimensions approx.: Length = 4,400 mm, height = 3,200 mm, depth = 1,050 mm Loading height: 2,950 mm Pressing dimensions: length = 3,250 mm, height = 2,300 mm Printing plates: depth=100 mm, width=120 mm Selling ex location as stated. You can see the press in use until around the end of January 2024. (technical information according to the manufacturer - no guarantee!)
            Working width 3250 mm
            Working height 2300 mm
            Number of cylinders 7 St.
            Dimensions (L/W/H) 4400 x 1050 x 3200 mm
            loading dimensions L x W x H 4400 x 1050 x 2950 mm
            Description :
            Maweg Hildebrand frame press EURO-Z
            --------------------------------------
            Press with 2 medium pressure beams!

            External dimensions approx.:
            Length = 4,400 mm, height = 3,200 mm, depth = 1,050 mm
            Loading height: 2,950 mm

            Pressing dimensions: length = 3,250 mm, height = 2,300 mm
            Printing plates: depth=100 mm, width=120 mm

            Selling ex location as stated.
            You can see the press in use until around the end of January 2024.

            (technical information according to the manufacturer - no guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact

          Window production centre

          used Window production: wood Window production centre WEINIG Unicontrol 6 NC Spindeln


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-2732 · Window production centre

          WEINIG - Unicontrol 6 NC Spindeln - - neuwertig - Weinig, PC-Nexus

          Technical details
          Tenoning spindle 1 0︱Number of milling agregates 5 St.︱Spindle diameter 50 mm︱control Weinig, PC-Nexus
          # 2732 Weinig Unicontrol 6 with NC spindles ------------------------------------------------ Machine is in checking process at the moment! Technical data summary (please inquire about any additional accessories included) Pos. 1: Crosscut saw ------------------------------------------------ > Number of tools: 1 piece. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3 kW > Adjustment path radially pneumatically controlled to 8 positions, e.g. for edge rounding from above > Laser directional light to detect the saw section Pos. 2: Rounding unit horizontally at the bottom ------------------------------------------------ > Position: horizontally below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length 25 mm > Spindle speed: 9000 rpm > Tool flight circle max.: 130 mm > Adjustment path axially mechanically coupled to crosscut saw > Adjustment path radially pneumatically controlled on/off Length stop CNC controlled ------------------------------------------------ > Length 3500 mm > electronic length stop Pos. 3: Tap and slot spindle ------------------------------------------------ > Number of tools: variable, infinitely variable, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely variable, CNC > Spindle speed: 3500 rpm > Tool flight circle max. 320 mm > Spindle diameter: 50 mm > Tool diameter max.: 320 mm > Motor power: 11 kW Pos. 4: 1. Profiling spindle (synchronous and counter-rotation) ------------------------------------------------ > Position: vertical right > Number of tools: 1 piece. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 7.5 kW Pos. 5: 2nd profiling spindle ------------------------------------------------ > Position: vertical right > Number of tools: variable, infinitely variable, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely variable, NC > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 2 feed rollers axially pneumatically controlled opposite the spindle, 2 positions Rung guide consisting of: Guide ruler in the stop (area of synchronous spindle), Rung support bar from above in the area of the profile milling unit vertically on the right and profiling spindle. Pos. 6: Profile milling unit horizontally at the top ------------------------------------------------ > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed 9,000 rpm > Tool flight circle max. 130 mm > Axial adjustment range 30 mm, 8 positions > Radial adjustment path 125 mm, 8 positions Pos. 7: 3rd profiling spindle (fittings spindle) ------------------------------------------------ > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range 115 mm, 8 positions > Radial adjustment range 110 mm, 8-fold turret > Spindle speed: 5850 rpm > Spindle diameter: 40 mm > Tool flight circle max.: 210 mm > Motor power: 3.0 kW Pos. 8: Profile milling unit/grooving unit from below ------------------------------------------------ > Motor power: 3.0 kW > Tool clamping length: 125 mm > Axial adjustment range 100 mm, 8 positions > Radial adjustment range 100 mm, 8-fold turret > Spindle speed: 5850 rpm > Spindle diameter: 40 mm > Tool flight circle max.: 200 mm Other features ------------------------------------------------ > online capable > Electric feed height adjustment including mechanical digital display and manual feed beam clamping > Folding device for tear-free folding > Double parts package > Return conveyor for 1-man operation: slat conveyor > Screen controls > Slanted window device > Electronic angle display for sloping windows > Industrial PC, touchscreen with Windows PC control/NEXUS > with Weinig type production program Suction nozzle diameter: ------------------------------------------------ Crosscut saw 80 mm Slotted spindle 140 mm Profile spindle 1 140 mm Profile spindle 2 140 mm Fitting spindle 120 mm Grooving device from above 80 mm Grooving device from below 80 mm Option: used tools Oertli IV 68/78 wood and wood-aluminium (see warehouse number 6813) The technical characteristics of this machine should meet your expectations do not correspond, please contact us. Our A team with many years of experience will be happy to support you with any adjustments or when looking for a machine that meets your requirements! (technical data according to the manufacturer - no guarantee!)
            Tenoning spindle 1 0
            Number of milling agregates 5 St.
            Spindle diameter 50 mm
            control Weinig, PC-Nexus
            Description :
            # 2732 Weinig Unicontrol 6 with NC spindles
            ------------------------------------------------
            Machine is in checking process at the moment!

            Technical data summary
            (please inquire about any additional accessories included)


            Pos. 1: Crosscut saw
            ------------------------------------------------
            > Number of tools: 1 piece.
            > Spindle speed: 2,800 rpm
            > Spindle diameter: 40 mm
            > Tool diameter max.: 400 mm
            > Motor power: 3 kW
            > Adjustment path radially pneumatically controlled to 8 positions,
            e.g. for edge rounding from above

            > Laser directional light to detect the saw section

            Pos. 2: Rounding unit horizontally at the bottom
            ------------------------------------------------
            > Position: horizontally below
            > Motor power: 1.5 kW
            > Spindle diameter: 20 mm
            > Clamping length 25 mm
            > Spindle speed: 9000 rpm
            > Tool flight circle max.: 130 mm
            > Adjustment path axially mechanically coupled to crosscut saw
            > Adjustment path radially pneumatically controlled on/off

            Length stop CNC controlled
            ------------------------------------------------
            > Length 3500 mm
            > electronic length stop

            Pos. 3: Tap and slot spindle
            ------------------------------------------------
            > Number of tools: variable, infinitely variable, NC
            > Tool clamping length: 320 mm
            > Vertical spindle stroke: variable, infinitely variable, CNC
            > Spindle speed: 3500 rpm
            > Tool flight circle max. 320 mm
            > Spindle diameter: 50 mm
            > Tool diameter max.: 320 mm
            > Motor power: 11 kW

            Pos. 4: 1. Profiling spindle (synchronous and counter-rotation)
            ------------------------------------------------
            > Position: vertical right
            > Number of tools: 1 piece.
            > Tool clamping length: 120 mm
            > Spindle speed: 6000 rpm
            > Spindle diameter: 50 mm
            > Tool flight circle max.: 232 mm
            > Motor power: 7.5 kW

            Pos. 5: 2nd profiling spindle
            ------------------------------------------------
            > Position: vertical right
            > Number of tools: variable, infinitely variable, NC
            > Tool clamping length: 320 mm
            > Vertical spindle stroke: variable, infinitely variable, NC
            > Spindle speed: 6000 rpm
            > Spindle diameter: 50 mm
            > Tool flight circle max.: 232 mm
            > Motor power: 11 kW

            2 feed rollers axially pneumatically controlled opposite the spindle, 2
            positions

            Rung guide consisting of:
            Guide ruler in the stop (area of synchronous spindle),
            Rung support bar from above in the area of the profile milling unit vertically
            on the right
            and profiling spindle.


            Pos. 6: Profile milling unit horizontally at the top
            ------------------------------------------------
            > Clamping length: 40 mm
            > Spindle diameter: 40 mm
            > Motor power: 3.0 kW
            > Speed 9,000 rpm
            > Tool flight circle max. 130 mm
            > Axial adjustment range 30 mm, 8 positions
            > Radial adjustment path 125 mm, 8 positions

            Pos. 7: 3rd profiling spindle (fittings spindle)
            ------------------------------------------------
            > Position: vertical right
            > Tool clamping length: 160 mm
            > Axial adjustment range 115 mm, 8 positions
            > Radial adjustment range 110 mm, 8-fold turret
            > Spindle speed: 5850 rpm
            > Spindle diameter: 40 mm
            > Tool flight circle max.: 210 mm
            > Motor power: 3.0 kW

            Pos. 8: Profile milling unit/grooving unit from below
            ------------------------------------------------
            > Motor power: 3.0 kW
            > Tool clamping length: 125 mm
            > Axial adjustment range 100 mm, 8 positions
            > Radial adjustment range 100 mm, 8-fold turret
            > Spindle speed: 5850 rpm
            > Spindle diameter: 40 mm
            > Tool flight circle max.: 200 mm

            Other features
            ------------------------------------------------
            > online capable
            > Electric feed height adjustment including mechanical digital display
            and manual feed beam clamping
            > Folding device for tear-free folding
            > Double parts package
            > Return conveyor for 1-man operation: slat conveyor
            > Screen controls
            > Slanted window device
            > Electronic angle display for sloping windows
            > Industrial PC, touchscreen with Windows PC control/NEXUS
            > with Weinig type production program

            Suction nozzle diameter:
            ------------------------------------------------
            Crosscut saw 80 mm
            Slotted spindle 140 mm
            Profile spindle 1 140 mm
            Profile spindle 2 140 mm
            Fitting spindle 120 mm
            Grooving device from above 80 mm
            Grooving device from below 80 mm

            Option:
            used tools Oertli IV 68/78 wood and wood-aluminium (see warehouse number 6813)



            The technical characteristics of this machine should meet your expectations
            do not correspond, please contact us. Our
            A team with many years of experience will be happy to support you with any
            adjustments or when looking for a machine that meets your requirements!

            (technical data according to the manufacturer - no guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Window production centre WEINIG Unicontrol 12 NC


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-2711 · Window production centre

          WEINIG - Unicontrol 12 NC - - gebraucht - CNC, Weinig PC-Nexus

          Technical details
          Tenoning spindle 2 St.︱Number of milling agregates 7 St.︱Spindle diameter 50 mm︱Control CNC, Weinig PC-Nexus
          Weinig Uncontrol 12 with radial and axial CNC spindles and VARIO table .................................................. The machine has already been professionally dismantled and stored in 73447 Oberkochen Specifications summary (please inquire about any additional accessories included) .................................................. crosscut saw .................................................. > Crosscut saw electronically, horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 3000-6000 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3.7 kW > Laser guide light for detecting the sawing section > Axial adjustment path 150 mm NC axis, electronically stepless > Adjustment path, radial, pneumatic, 8 positions, e.g. for edge rounding from above rounding aggregate .................................................. > Position: horizontally below > Axial adjustment path together with the crosscut saw. electronic length stop .................................................. > Length 4500mm 1. Tap and Slot Spindle .................................................. > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment range: 580 mm NC axis, stepless > Spindle speed: 2,800-4,000 rpm > Tool diameter: 380-400mm > Overrun counter, complete clamping length is countered 2. Tap and Slot Spindle .................................................. > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment range: 580 mm NC axis, stepless > Spindle speed: 2,800-4,000 rpm > Tool diameter: 380-400mm > Overrun counter, complete clamping length is countered transfer tape .................................................. Included for transferring the parts to longitudinal processing Separation of double parts before entering longitudinal processing. 1. Profiling spindle (synchronous and counter-rotating) .................................................. > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment range 350 mm NC axis, stepless > Radial adjustment range 80 mm NC axis, stepless > Spindle speed: 6000 rpm > Minimum tool flight circle: 140 mm > Tool flight circle max.: 232 mm 2. Profiling spindle .................................................. > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment range 350 mm NC axis, stepless > Radial adjustment range 80 mm NC axis, stepless > Spindle speed: 6000 rpm > Minimum tool flight circle: 140 mm > Tool flight circle max.: 232 mm 3. Profile milling unit (grooving device from above) .................................................. > Position: horizontally above > Motor power: 3.0 kW > Spindle diameter: 40 mm > Tool clamping length: 40 mm > Axial adjustment range 30 mm NC axis, stepless > Radial adjustment range 125 mm NC axis, stepless > Spindle speed: 9000 rpm > Tool flight circle max.: 130 mm 4. Profiling spindle .................................................. > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment range 350 mm NC axis, stepless > Radial adjustment range 80 mm NC axis, stepless > Spindle speed: 6000 rpm > Minimum tool flight circle: 140 mm > Tool flight circle max.: 232 mm 5. Profile milling unit (fitting spindle) .................................................. > Position: vertical right > Motor power: 3.0 kW > Spindle diameter: 40 mm > Tool clamping length: 160 mm > Axial adjustment range 115 mm NC axis, stepless > Radial adjustment range 100 mm NC axis, stepless > Spindle speed: 5850 rpm > Tool flight circle max.: 210 mm 6. Profile milling unit (grooving device from above), in the additional stand .................................................. > Position: working vertically to the right from above > Motor power: 3 kW > Spindle diameter: 40 mm > Tool clamping length: 40 mm > Axial adjustment path 100 mm, 8 positions using pneumatic turret > Radial adjustment path 80 mm 8 positions using pneumatic turret > Spindle speed: 5850 rpm > Tool flight circle max.: 180 mm 7. Profiling spindle (grooving device from below, in the additional stand) .................................................. > Position: horizontally below > Motor power: 3 kW > Spindle diameter: 40 mm > Tool clamping length: 125 mm > Axial adjustment range 100 mm NC axis, stepless > Radial adjustment range 100 mm NC axis, stepless > Spindle speed: 5850 rpm > Tool flight circle max.: 200 mm Other features .................................................. > online capable > Folding device for tear-free folding > 2 axially clocked feed rollers opposite profile milling units, for production of narrow, short parts (e.g. glazing bars) > 3 axially clocked feed rollers (2) opposite the profiling spindle 8 positions using pneumatic turret, for spindle 1,2,3 > 3 table tops indexed to the tool diameter (2 positions), profile spindle No. 3 and fitting spindle > 3 rung support rails cycled vertically after the last profiling spindle > Feed height adjustment with NC axis > Divided pressure ruler on the left for wood widths of 40-140 mm > Double parts package > Return conveyor device for 1-man operation: slat conveyor > Screen controls > Pitched window installation > electronic angle display for sloping windows > Control: NEXUS PC control > VARIOplus package for tapping and slotting table, including length stop, CNC-controlled, 4,500 mm timber length, including studio window installation, Swivel angle 75 degrees, horizontal CNC axis, adjustment range 200 mm > Automatic central lubrication > Air conditioning unit in the control cabinet Option: > used window tools OERTLI IV 68, 78 wood and wood-aluminium Should the technical characteristics of this machine not meet your expectations correspond, please contact us. Our longtime experienced team will be happy to support you with any adjustments or with the Find a machine that suits your needs! (Technical information according to the manufacturer - without guarantee!)
            Tenoning spindle 2 St.
            Number of milling agregates 7 St.
            Spindle diameter 50 mm
            Control CNC, Weinig PC-Nexus
            Description :
            Weinig Uncontrol 12
            with radial and axial CNC spindles and VARIO table
            ..................................................
            The machine has already been professionally dismantled and stored in 73447
            Oberkochen

            Specifications summary
            (please inquire about any additional accessories included)
            ..................................................

            crosscut saw
            ..................................................
            > Crosscut saw electronically, horizontally infinitely adjustable
            > Number of tools: 1 pc.
            > Spindle speed: 3000-6000 rpm
            > Spindle diameter: 40 mm
            > Tool diameter max.: 400 mm
            > Motor power: 3.7 kW
            > Laser guide light for detecting the sawing section
            > Axial adjustment path 150 mm NC axis, electronically stepless
            > Adjustment path, radial, pneumatic, 8 positions, e.g. for edge rounding from
            above

            rounding aggregate
            ..................................................
            > Position: horizontally below
            > Axial adjustment path together with the crosscut saw.


            electronic length stop
            ..................................................
            > Length 4500mm

            1. Tap and Slot Spindle
            ..................................................
            > Number of tools: variable
            > Motor power: 15 kW
            > Spindle diameter: 50 mm
            > Tool clamping length: 640 mm, with counter bearing
            > Axial adjustment range: 580 mm NC axis, stepless
            > Spindle speed: 2,800-4,000 rpm
            > Tool diameter: 380-400mm
            > Overrun counter, complete clamping length is countered

            2. Tap and Slot Spindle
            ..................................................
            > Number of tools: variable
            > Motor power: 15 kW
            > Spindle diameter: 50 mm
            > Tool clamping length: 640 mm, with counter bearing
            > Axial adjustment range: 580 mm NC axis, stepless
            > Spindle speed: 2,800-4,000 rpm
            > Tool diameter: 380-400mm
            > Overrun counter, complete clamping length is countered

            transfer tape
            ..................................................
            Included for transferring the parts to longitudinal processing
            Separation of double parts before entering longitudinal processing.

            1. Profiling spindle (synchronous and counter-rotating)
            ..................................................
            > Position: vertical right
            > Number of tools: variable
            > Motor power: 11 kW
            > Spindle diameter: 50 mm
            > Tool clamping length: 400 mm, with counter bearing
            > Axial adjustment range 350 mm NC axis, stepless
            > Radial adjustment range 80 mm NC axis, stepless
            > Spindle speed: 6000 rpm
            > Minimum tool flight circle: 140 mm
            > Tool flight circle max.: 232 mm


            2. Profiling spindle
            ..................................................
            > Position: vertical right
            > Number of tools: variable
            > Motor power: 11 kW
            > Spindle diameter: 50 mm
            > Tool clamping length: 400 mm, with counter bearing
            > Axial adjustment range 350 mm NC axis, stepless
            > Radial adjustment range 80 mm NC axis, stepless
            > Spindle speed: 6000 rpm
            > Minimum tool flight circle: 140 mm
            > Tool flight circle max.: 232 mm


            3. Profile milling unit (grooving device from above)
            ..................................................
            > Position: horizontally above
            > Motor power: 3.0 kW
            > Spindle diameter: 40 mm
            > Tool clamping length: 40 mm
            > Axial adjustment range 30 mm NC axis, stepless
            > Radial adjustment range 125 mm NC axis, stepless
            > Spindle speed: 9000 rpm
            > Tool flight circle max.: 130 mm

            4. Profiling spindle
            ..................................................
            > Position: vertical right
            > Number of tools: variable
            > Motor power: 11 kW
            > Spindle diameter: 50 mm
            > Tool clamping length: 400 mm, with counter bearing
            > Axial adjustment range 350 mm NC axis, stepless
            > Radial adjustment range 80 mm NC axis, stepless
            > Spindle speed: 6000 rpm
            > Minimum tool flight circle: 140 mm
            > Tool flight circle max.: 232 mm

            5. Profile milling unit (fitting spindle)
            ..................................................
            > Position: vertical right
            > Motor power: 3.0 kW
            > Spindle diameter: 40 mm
            > Tool clamping length: 160 mm
            > Axial adjustment range 115 mm NC axis, stepless
            > Radial adjustment range 100 mm NC axis, stepless
            > Spindle speed: 5850 rpm
            > Tool flight circle max.: 210 mm


            6. Profile milling unit (grooving device from above), in the additional stand
            ..................................................
            > Position: working vertically to the right from above
            > Motor power: 3 kW
            > Spindle diameter: 40 mm
            > Tool clamping length: 40 mm
            > Axial adjustment path 100 mm, 8 positions using pneumatic turret
            > Radial adjustment path 80 mm 8 positions using pneumatic turret
            > Spindle speed: 5850 rpm
            > Tool flight circle max.: 180 mm

            7. Profiling spindle (grooving device from below, in the additional stand)
            ..................................................
            > Position: horizontally below
            > Motor power: 3 kW
            > Spindle diameter: 40 mm
            > Tool clamping length: 125 mm
            > Axial adjustment range 100 mm NC axis, stepless
            > Radial adjustment range 100 mm NC axis, stepless
            > Spindle speed: 5850 rpm
            > Tool flight circle max.: 200 mm

            Other features
            ..................................................

            > online capable
            > Folding device for tear-free folding
            > 2 axially clocked feed rollers opposite profile milling units, for production
            of narrow, short parts (e.g. glazing bars)
            > 3 axially clocked feed rollers (2) opposite the profiling spindle
            8 positions using pneumatic turret, for spindle 1,2,3
            > 3 table tops indexed to the tool diameter (2 positions), profile spindle
            No. 3 and fitting spindle
            > 3 rung support rails cycled vertically after the last profiling spindle
            > Feed height adjustment with NC axis
            > Divided pressure ruler on the left for wood widths of 40-140 mm
            > Double parts package
            > Return conveyor device for 1-man operation: slat conveyor
            > Screen controls
            > Pitched window installation
            > electronic angle display for sloping windows
            > Control: NEXUS PC control
            > VARIOplus package for tapping and slotting table, including length stop,
            CNC-controlled, 4,500 mm timber length, including studio window installation,
            Swivel angle 75 degrees, horizontal CNC axis, adjustment range 200 mm
            > Automatic central lubrication
            > Air conditioning unit in the control cabinet

            Option:
            > used window tools OERTLI IV 68, 78 wood and wood-aluminium

            Should the technical characteristics of this machine not meet your expectations
            correspond, please contact us. Our longtime
            experienced team will be happy to support you with any adjustments or with the
            Find a machine that suits your needs!

            (Technical information according to the manufacturer - without guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Window production centre WEINIG Unicontrol 6 NC Spindeln


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6830 · Window production centre

          WEINIG - Unicontrol 6 NC Spindeln - - gebraucht -

          Technical details
          Tenoning spindle 1 St.︱Number of milling agregates 4 St.︱Spindle diameter 50 mm︱
          Weinig Unicontrol 6 with NC spindles ----------------------------------- Technical data summary (please inquire about any additional accessories included) ................................... Generally ----------------------------------- > Loading dimensions: 7000 x 2400 x 2400 mm > Machine weight, approx.: 3700 kg crosscut saw ----------------------------------- > Electronic crosscut saw, horizontally infinitely adjustable > Number of tools: 1 piece. > Spindle speed: 2800 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3 kW > Laser directional light to detect the saw section Electronically safe length stop ----------------------------------- > Length 3600 mm 1. Tap and slot spindle ---------------------------------- > Number of tools: 3/4 pieces. > Tool clamping length: 320 mm > Spindle stroke vertical adjustment continuously > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Tool diameter max.: 320 mm > Motor power: 11 kW 1. Profiling spindle (synchronous and counter-rotation) ----------------------------------- > Position: vertical right > Number of tools: 1 piece. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 7.5 kW 2. Profiling spindle ----------------------------------- > Position: vertical right > Number of tools: 3/4 pieces. > Tool clamping length: 320 mm > Spindle stroke vertical adjustment continuously > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 3. Profiling spindle (fittings spindle) ------------------------------------- > Position: vertical right > Number of tools: 3 pieces. > Tool clamping length: 160 mm > Spindle speed: 5850 rpm > Spindle diameter: 40 mm > Tool flight circle max.: 210 mm > Motor power: 3 kW 4. Grooving device clocked horizontally + vertically at the top ------------------------------------- > Number of tools: 2 pieces. > Spindle speed: 5850 rpm > Spindle diameter: 40 mm > Tool flight circle max.: 130 mm > Motor power: 3 kW Other features ------------------------------------- > online capable > Folding device for tear-free folding > Double parts package > Return conveyor system for 1-man operation > Screen controls > Slanted window device > Electronic angle display for sloping windows: > Control: PC control Nexus, CNC > Option: > Tools IV 68 Oertli > Tools IV 78 Leitz > Tools IV 92 Leitz If the technical characteristics of this machine do not meet your expectations correspond, please contact us. Our long-standing Our experienced team will be happy to support you with any adjustments or Find a machine that meets your needs! ----------------------------------- (technical information according to the manufacturer - no guarantee!)
            Tenoning spindle 1 St.
            Number of milling agregates 4 St.
            Spindle diameter 50 mm
            Description :
            Weinig Unicontrol 6 with NC spindles
            -----------------------------------

            Technical data summary
            (please inquire about any additional accessories included)
            ...................................

            Generally
            -----------------------------------
            > Loading dimensions: 7000 x 2400 x 2400 mm
            > Machine weight, approx.: 3700 kg

            crosscut saw
            -----------------------------------
            > Electronic crosscut saw, horizontally infinitely adjustable
            > Number of tools: 1 piece.
            > Spindle speed: 2800 rpm
            > Spindle diameter: 40 mm
            > Tool diameter max.: 400 mm
            > Motor power: 3 kW
            > Laser directional light to detect the saw section

            Electronically safe length stop
            -----------------------------------
            > Length 3600 mm


            1. Tap and slot spindle
            ----------------------------------
            > Number of tools: 3/4 pieces.
            > Tool clamping length: 320 mm
            > Spindle stroke vertical adjustment continuously
            > Spindle speed: 3500 rpm
            > Spindle diameter: 50 mm
            > Tool diameter max.: 320 mm
            > Motor power: 11 kW

            1. Profiling spindle (synchronous and counter-rotation)
            -----------------------------------
            > Position: vertical right
            > Number of tools: 1 piece.
            > Tool clamping length: 120 mm
            > Spindle speed: 6000 rpm
            > Spindle diameter: 50 mm
            > Tool flight circle max.: 232 mm
            > Motor power: 7.5 kW

            2. Profiling spindle
            -----------------------------------
            > Position: vertical right
            > Number of tools: 3/4 pieces.
            > Tool clamping length: 320 mm
            > Spindle stroke vertical adjustment continuously
            > Spindle speed: 6000 rpm
            > Spindle diameter: 50 mm
            > Tool flight circle max.: 232 mm
            > Motor power: 11 kW
            3. Profiling spindle (fittings spindle)
            -------------------------------------
            > Position: vertical right
            > Number of tools: 3 pieces.
            > Tool clamping length: 160 mm
            > Spindle speed: 5850 rpm
            > Spindle diameter: 40 mm
            > Tool flight circle max.: 210 mm
            > Motor power: 3 kW

            4. Grooving device clocked horizontally + vertically at the top
            -------------------------------------
            > Number of tools: 2 pieces.
            > Spindle speed: 5850 rpm
            > Spindle diameter: 40 mm
            > Tool flight circle max.: 130 mm
            > Motor power: 3 kW

            Other features
            -------------------------------------
            > online capable
            > Folding device for tear-free folding
            > Double parts package
            > Return conveyor system for 1-man operation
            > Screen controls
            > Slanted window device
            > Electronic angle display for sloping windows:
            > Control: PC control Nexus, CNC
            > Option:
            > Tools IV 68 Oertli
            > Tools IV 78 Leitz
            > Tools IV 92 Leitz

            If the technical characteristics of this machine do not meet your expectations
            correspond, please contact us. Our long-standing
            Our experienced team will be happy to support you with any adjustments or
            Find a machine that meets your needs!
            -----------------------------------
            (technical information according to the manufacturer - no guarantee!)



        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Window production centre WEINIG Unicontrol 6


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-2725 · Window production centre

          WEINIG - Unicontrol 6 - - gebraucht - Südtron BT 20

          Technical details
          Tenoning spindle 1 St.︱Number of milling agregates 4 St.︱Spindle diameter 50 mm︱control Südtron BT 20
          Weinig Unicontrol 6 --------------------------------- General data --------------------------------- Loading dimensions approx. 5000x2400x2400 Machine weight approx. 3000 kg crosscut saw --------------------------------- > Pneumatic crosscut saw, against 8-fold turret stop > Spindle speed: 2800 > Spindle diameter: 40 mm > Tool diameter max.: 350 mm > Motor power: 3 kW > Laser directional light to detect the saw section Length stop - clocked --------------------------------- > Length stop 2700 mm 1. Tap and slot spindle --------------------------------- > Number of tools: 3/4 pieces. > Tool clamping length: 320 mm > Vertical pneumatic spindle stroke: 240 mm for wood thicknesses IV 68-92 > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Tool diameter max.: 320 mm > Motor power: 11 kW 1. Profiling spindle - synchronous spindle (synchronous and counter-rotation) ---------------------------------- > Position: vertical right > Number of tools: 1 piece. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 7.5 kW 2. Profiling spindle --------------------------------- > Position: vertical right > Number of tools: 3/4 pieces. > Tool clamping length: 320 mm > Vertical pneumatic spindle stroke: 240 mm for wood thicknesses IV 68-92 > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 3. Profiling spindle (fittings spindle) ---------------------------------- > Position: vertical right > Number of tools: 3 pieces. > Spindle speed: 6000 rpm > Spindle diameter: 40 mm > Tool flight circle max.: 180 mm > Motor power: 3 kW > Clamping length 150 mm > Horizontal: 2 positions > Vertical: 3 positions 4. Glass bead saw pneumatically up and down ---------------------------------- > Motor 3 kW Other features ---------------------------------- > Folding device for tear-free folding > Double parts package > Screen control 99 programs Sütron BT20 > Slanted window device > Electronic angle display for sloping windows > Return roller conveyor with push-off device > CE mark (technical data according to the manufacturer - no guarantee!)
            Tenoning spindle 1 St.
            Number of milling agregates 4 St.
            Spindle diameter 50 mm
            control Südtron BT 20
            Description :
            Weinig Unicontrol 6
            ---------------------------------

            General data
            ---------------------------------

            Loading dimensions approx. 5000x2400x2400
            Machine weight approx. 3000 kg

            crosscut saw
            ---------------------------------

            > Pneumatic crosscut saw, against 8-fold turret stop
            > Spindle speed: 2800
            > Spindle diameter: 40 mm
            > Tool diameter max.: 350 mm
            > Motor power: 3 kW
            > Laser directional light to detect the saw section

            Length stop - clocked
            ---------------------------------
            > Length stop 2700 mm

            1. Tap and slot spindle
            ---------------------------------

            > Number of tools: 3/4 pieces.
            > Tool clamping length: 320 mm
            > Vertical pneumatic spindle stroke: 240 mm for wood thicknesses IV 68-92
            > Spindle speed: 3500 rpm
            > Spindle diameter: 50 mm
            > Tool diameter max.: 320 mm
            > Motor power: 11 kW

            1. Profiling spindle - synchronous spindle (synchronous and counter-rotation)
            ----------------------------------

            > Position: vertical right
            > Number of tools: 1 piece.
            > Tool clamping length: 120 mm
            > Spindle speed: 6000 rpm
            > Spindle diameter: 50 mm
            > Tool flight circle max.: 232 mm
            > Motor power: 7.5 kW

            2. Profiling spindle
            ---------------------------------

            > Position: vertical right
            > Number of tools: 3/4 pieces.
            > Tool clamping length: 320 mm
            > Vertical pneumatic spindle stroke: 240 mm for wood thicknesses IV 68-92
            > Spindle speed: 6000 rpm
            > Spindle diameter: 50 mm
            > Tool flight circle max.: 232 mm
            > Motor power: 11 kW

            3. Profiling spindle (fittings spindle)
            ----------------------------------

            > Position: vertical right
            > Number of tools: 3 pieces.
            > Spindle speed: 6000 rpm
            > Spindle diameter: 40 mm
            > Tool flight circle max.: 180 mm
            > Motor power: 3 kW
            > Clamping length 150 mm
            > Horizontal: 2 positions
            > Vertical: 3 positions

            4. Glass bead saw pneumatically up and down
            ----------------------------------
            > Motor 3 kW

            Other features
            ----------------------------------

            > Folding device for tear-free folding
            > Double parts package
            > Screen control 99 programs Sütron BT20
            > Slanted window device
            > Electronic angle display for sloping windows
            > Return roller conveyor with push-off device
            > CE mark

            (technical data according to the manufacturer - no guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • 9.500 €
          Datasheet
          Request / Contact
          used Window production: wood Window production centre WEINIG Unicontrol 6 NC Spindeln


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-2654 · Window production centre

          WEINIG - Unicontrol 6 NC Spindeln - - gebraucht - Weinig, PC-Nexus

          Technical details
          Tenoning spindle 1 St.︱Number of milling agregates 4 St.︱Spindle diameter 50 mm︱control Weinig, PC-Nexus
          #2654 Weinig Unicontrol 6 with NC spindles ------------------------------------------------------ Machine is checked, ready for demonstration Specifications summary (please inquire about any additional accessories included) Pos. 1: Crosscut saw ---------------------------- > Crosscut saw electronically, horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3.0 kW > Laser guide light for detecting the sawing section electronic length stop, mounted on slotted table included Positioning of the cross-cut saw integrated in the control. > Length 3500mm Pos. 2: tapping and slotted spindle ---------------------------- > Number of tools: variable, infinitely variable NC axis adjustment > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless adjustment 254 mm NC axis > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Tool diameter max.: 320 mm > Motor power: 11 kW Pos. 3: 1st profiling spindle (synchronous spindle) ---------------------------- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 7.5 kW Pos. 4: 2nd profiling spindle ---------------------------- > Position: vertical right > Number of tools: variable, infinitely variable NC axis adjustment > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless adjustment 254 mm NC axis > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle axially pneumatically controlled, 2 positions Rung guide consisting of: Guide ruler at the stop (synchronous spindle area), Rung support strip from above in the area of ??the profile milling unit, vertically on the right and profiling spindle. Pos. 5: Profile milling unit horizontally above ---------------------------- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed ??5,850 rpm > Tool cutting circle max. 130 mm > Axial adjustment range 30 mm, 2 positions > Radial adjustment range 125 mm, 8 positions Item 6: 3rd profiling spindle (fitting spindle) ---------------------------- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range 115 mm, 8 positions > Radial adjustment path 100 mm, 8 positions > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Tool flight circle max.: 210 mm > Motor power: 3.0 kW Other features ---------------------------- > online capable > Folding device for tear-free folding > Double parts package > Return conveyor device for 1-man operation: slat conveyor > Screen controls > Pitched window installation > electronic angle display for sloping windows > Industrial PC, PC control/NEXUS > Weinig type production program If the technical characteristics of this machine do not meet your expectations please contact us. Our experienced team will be happy to support you with any adjustments or looking for an alternative machine that meets your requirements! (technical data according to the manufacturer - without guarantee!)
            Tenoning spindle 1 St.
            Number of milling agregates 4 St.
            Spindle diameter 50 mm
            control Weinig, PC-Nexus
            Description :
            #2654 Weinig Unicontrol 6 with NC spindles
            ------------------------------------------------------
            Machine is checked, ready for demonstration

            Specifications summary
            (please inquire about any additional accessories included)


            Pos. 1: Crosscut saw
            ----------------------------
            > Crosscut saw electronically, horizontally infinitely adjustable
            > Number of tools: 1 pc.
            > Spindle speed: 2,800 rpm
            > Spindle diameter: 40 mm
            > Tool diameter max.: 400 mm
            > Motor power: 3.0 kW
            > Laser guide light for detecting the sawing section

            electronic length stop, mounted on slotted table included
            Positioning of the cross-cut saw integrated in the control.
            > Length 3500mm

            Pos. 2: tapping and slotted spindle
            ----------------------------
            > Number of tools: variable, infinitely variable NC axis adjustment
            > Tool clamping length: 320 mm
            > Vertical spindle stroke: variable, stepless adjustment 254 mm NC axis
            > Spindle speed: 3500 rpm
            > Spindle diameter: 50 mm
            > Tool diameter max.: 320 mm
            > Motor power: 11 kW


            Pos. 3: 1st profiling spindle (synchronous spindle)
            ----------------------------
            > Position: vertical right
            > Number of tools: 1 pc.
            > Tool clamping length: 120 mm
            > Spindle speed: 6000 rpm
            > Spindle diameter: 50 mm
            > Tool flight circle max.: 232 mm
            > Motor power: 7.5 kW


            Pos. 4: 2nd profiling spindle
            ----------------------------
            > Position: vertical right
            > Number of tools: variable, infinitely variable NC axis adjustment
            > Tool clamping length: 320 mm
            > Vertical spindle stroke: variable, stepless adjustment 254 mm NC axis
            > Spindle speed: 6000 rpm
            > Spindle diameter: 50 mm
            > Tool flight circle max.: 232 mm
            > Motor power: 11 kW

            2 feed rollers opposite the spindle axially pneumatically controlled, 2
            positions

            Rung guide consisting of:
            Guide ruler at the stop (synchronous spindle area),
            Rung support strip from above in the area of ??the profile milling unit,
            vertically on the right
            and profiling spindle.


            Pos. 5: Profile milling unit horizontally above
            ----------------------------
            > Clamping length: 40 mm
            > Spindle diameter: 40 mm
            > Motor power: 3.0 kW
            > Speed ??5,850 rpm
            > Tool cutting circle max. 130 mm
            > Axial adjustment range 30 mm, 2 positions
            > Radial adjustment range 125 mm, 8 positions


            Item 6: 3rd profiling spindle (fitting spindle)
            ----------------------------
            > Position: vertical right
            > Tool clamping length: 160 mm
            > Axial adjustment range 115 mm, 8 positions
            > Radial adjustment path 100 mm, 8 positions
            > Spindle speed: 5,850 rpm
            > Spindle diameter: 40 mm
            > Tool flight circle max.: 210 mm
            > Motor power: 3.0 kW

            Other features
            ----------------------------
            > online capable
            > Folding device for tear-free folding
            > Double parts package
            > Return conveyor device for 1-man operation: slat conveyor
            > Screen controls
            > Pitched window installation
            > electronic angle display for sloping windows
            > Industrial PC, PC control/NEXUS
            > Weinig type production program

            If the technical characteristics of this machine do not meet your expectations
            please contact us. Our experienced team will be happy to support you with any
            adjustments or looking for an alternative machine that meets your requirements!

            (technical data according to the manufacturer - without guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Window production centre WEINIG Unicontrol 12 NC


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-2728 · Window production centre

          WEINIG - Unicontrol 12 NC - - gebraucht - Weinig, PC-Nexus

          Technical details
          Tenoning spindle 2 St.︱Number of milling agregates 7 St.︱Spindle diameter 50 mm︱control Weinig, PC-Nexus
          Weinig Unicontrol 12 with radial and axial CNC spindles as well as VARIO table and milling carriage ................................................ Machine dismantled professionally and in our warehouse in 73447 Oberkochen. Video and pictures were taken before dismantling. Technical data summary (please inquire about any additional accessories included) ................................................ crosscut saw ................................................ > Electronic crosscut saw, horizontally infinitely adjustable > Number of tools: 1 piece. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3.7 kW > Laser directional light to detect the saw section > Axial adjustment path 150 mm NC axis, electronically infinitely variable > Radial pneumatic adjustment path 8 positions for e.g. edge rounding from above Rounding aggregate ................................................ > Position: horizontally below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Tool clamping length: 25 mm > Spindle speed: 9,000 rpm > Tool diameter: max. 130 mm > Axial adjustment path mechanically coupled with crosscut saw. > Radial adjustment pneumatically controlled on/off electronic length stop ................................................ > Length 4500 mm 1. Tap and slot spindle ................................................ > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment path: 580 mm NC axis, continuously variable > Spindle speed: 2,800 rpm > Tool diameter: max. 400 mm > Overtravel counter, complete clamping length is countered 2. Tap and slot spindle ................................................ > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment path: 580 mm NC axis, continuously variable > Spindle speed: 2,800rpm > Tool diameter: max. 400 mm > Overtravel counter, complete clamping length is countered Transfer tape ................................................ Included for transferring the parts to longitudinal machining Separation of double parts before the start of longitudinal processing. 1. Profiling spindle (synchronous and counter-rotation) ................................................ > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment path 350 mm NC axis, infinitely variable > Radial adjustment path 80 mm NC axis, infinitely variable > Spindle speed: 6000 rpm > Tool flight circle min.: 140 mm > Tool flight circle max.: 232 mm > 2 feed rollers axially pneumatically controlled opposite the spindle, 8 positions > Table top pneumatically controlled to the tool diameter 2. Profiling spindle ................................................ > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment path 350 mm NC axis, infinitely variable > Radial adjustment path 80 mm NC axis, infinitely variable > Spindle speed: 6000 rpm > Tool flight circle min.: 140 mm > Tool flight circle max.: 232 mm > 2 feed rollers axially pneumatically controlled opposite the spindle, 8 positions > Table top pneumatically controlled to the tool diameter 3. Profile milling unit (grooving device from above) ................................................ > Position: horizontal at the top > Motor power: 3.7 kW > Spindle diameter: 40 mm > Tool clamping length: 40 mm > Axial adjustment path 30 mm NC axis, infinitely variable > Radial adjustment path 125 mm NC axis, infinitely variable > Spindle speed: 9000 rpm > Tool flight circle max.: 130 mm > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment path 350 mm NC axis, infinitely variable > Radial adjustment path 80 mm NC axis, infinitely variable > Spindle speed: 6000 rpm > Tool flight circle min.: 140 mm > Tool flight circle max.: 232 mm > 1 feed roller axially pneumatically controlled opposite the spindle, 2 positions 4. Profiling spindle ................................................ > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment path 350 mm NC axis, infinitely variable > Radial adjustment path 80 mm NC axis, infinitely variable > Spindle speed: 6000 rpm > Tool flight circle min.: 140 mm > Tool flight circle max.: 232 mm > 2 feed rollers axially pneumatically controlled opposite the spindle, 8 positions > Rung support bar clocked vertically after the last profiling spindle 5. Profile milling unit (fittings spindle) ................................................ > Position: vertical right > Motor power: 3.7 kW > Spindle diameter: 40 mm > Tool clamping length: 160 mm > Axial adjustment path 115 mm NC axis, infinitely variable > Radial adjustment path 100 mm NC axis, infinitely variable > Spindle speed: 5850 rpm > Tool flight circle max.: 210 mm > 1 feed roller axially pneumatically controlled opposite the spindle, 2 positions 6. Profile milling unit (grooving device from above), in the additional stand ................................................ > Position: working vertically to the right from above > Motor power: 3.7 kW > Spindle diameter: 40 mm > Tool clamping length: 40 mm > Axial adjustment range 44 mm, 8 positions using a pneumatic turret > Radial adjustment path 100 mm NC axis, infinitely variable > Spindle speed: 9,000 rpm > Tool flight circle max.: 130 mm 7. Profiling spindle (grooving device from below, in the additional stand) ................................................ > Position: horizontally below > Motor power: 3 kW > Spindle diameter: 40 mm > Tool clamping length: 125 mm > Axial adjustment path 100 mm NC axis, infinitely variable > Radial adjustment path 100 mm NC axis, infinitely variable > Spindle speed: 5850 rpm > Tool flight circle max.: 200 mm > 1 feed roller axially pneumatically controlled opposite the spindle, 2 positions Other features ................................................ > online capable > Folding device for tear-free folding > Milling carriage for milling sashes with frame widths under 500 mm. Automatic pneumatic clamping > 9 feed rollers controlled up/down after the last profiling spindle faster and shorter milling process > Feed height adjustment with NC axis > Divided pressure ruler on the left, pneumatic, divided for wood widths 40-140 mm > Double parts package > Return conveyor for 1-man operation: slat conveyor > Screen controls > Slanted window device > Electronic angle display for sloping windows > Control: NEXUS PC control > Vario table with horizontal NC axis > Automatic central lubrication > Air conditioning unit in the control cabinet > Machine without processing tools If the technical characteristics of this machine do not meet your expectations correspond, please contact us. Our long-standing Our experienced team will be happy to support you with any adjustments or Find a machine that meets your needs! (Technical information according to the manufacturer - no guarantee!)
            Tenoning spindle 2 St.
            Number of milling agregates 7 St.
            Spindle diameter 50 mm
            control Weinig, PC-Nexus
            Description :
            Weinig Unicontrol 12
            with radial and axial CNC spindles as well as VARIO table and milling carriage
            ................................................
            Machine dismantled professionally and in our warehouse in 73447 Oberkochen.
            Video and pictures were taken before dismantling.

            Technical data summary
            (please inquire about any additional accessories included)
            ................................................

            crosscut saw
            ................................................
            > Electronic crosscut saw, horizontally infinitely adjustable
            > Number of tools: 1 piece.
            > Spindle speed: 2,800 rpm
            > Spindle diameter: 40 mm
            > Tool diameter max.: 400 mm
            > Motor power: 3.7 kW
            > Laser directional light to detect the saw section
            > Axial adjustment path 150 mm NC axis, electronically infinitely variable
            > Radial pneumatic adjustment path 8 positions for e.g. edge rounding from above

            Rounding aggregate
            ................................................
            > Position: horizontally below
            > Motor power: 1.5 kW
            > Spindle diameter: 20 mm
            > Tool clamping length: 25 mm
            > Spindle speed: 9,000 rpm
            > Tool diameter: max. 130 mm
            > Axial adjustment path mechanically coupled with crosscut saw.
            > Radial adjustment pneumatically controlled on/off

            electronic length stop
            ................................................
            > Length 4500 mm

            1. Tap and slot spindle
            ................................................
            > Number of tools: variable
            > Motor power: 15 kW
            > Spindle diameter: 50 mm
            > Tool clamping length: 640 mm, with counter bearing
            > Axial adjustment path: 580 mm NC axis, continuously variable
            > Spindle speed: 2,800 rpm
            > Tool diameter: max. 400 mm
            > Overtravel counter, complete clamping length is countered

            2. Tap and slot spindle
            ................................................
            > Number of tools: variable
            > Motor power: 15 kW
            > Spindle diameter: 50 mm
            > Tool clamping length: 640 mm, with counter bearing
            > Axial adjustment path: 580 mm NC axis, continuously variable
            > Spindle speed: 2,800rpm
            > Tool diameter: max. 400 mm
            > Overtravel counter, complete clamping length is countered

            Transfer tape
            ................................................
            Included for transferring the parts to longitudinal machining
            Separation of double parts before the start of longitudinal processing.

            1. Profiling spindle (synchronous and counter-rotation)
            ................................................
            > Position: vertical right
            > Number of tools: variable
            > Motor power: 11 kW
            > Spindle diameter: 50 mm
            > Tool clamping length: 400 mm, with counter bearing
            > Axial adjustment path 350 mm NC axis, infinitely variable
            > Radial adjustment path 80 mm NC axis, infinitely variable
            > Spindle speed: 6000 rpm
            > Tool flight circle min.: 140 mm
            > Tool flight circle max.: 232 mm
            > 2 feed rollers axially pneumatically controlled opposite the spindle,
            8 positions
            > Table top pneumatically controlled to the tool diameter


            2. Profiling spindle
            ................................................
            > Position: vertical right
            > Number of tools: variable
            > Motor power: 11 kW
            > Spindle diameter: 50 mm
            > Tool clamping length: 400 mm, with counter bearing
            > Axial adjustment path 350 mm NC axis, infinitely variable
            > Radial adjustment path 80 mm NC axis, infinitely variable
            > Spindle speed: 6000 rpm
            > Tool flight circle min.: 140 mm
            > Tool flight circle max.: 232 mm
            > 2 feed rollers axially pneumatically controlled opposite the spindle,
            8 positions
            > Table top pneumatically controlled to the tool diameter


            3. Profile milling unit (grooving device from above)
            ................................................
            > Position: horizontal at the top
            > Motor power: 3.7 kW
            > Spindle diameter: 40 mm
            > Tool clamping length: 40 mm
            > Axial adjustment path 30 mm NC axis, infinitely variable
            > Radial adjustment path 125 mm NC axis, infinitely variable
            > Spindle speed: 9000 rpm
            > Tool flight circle max.: 130 mm
            > Position: vertical right
            > Number of tools: variable
            > Motor power: 11 kW
            > Spindle diameter: 50 mm
            > Tool clamping length: 400 mm, with counter bearing
            > Axial adjustment path 350 mm NC axis, infinitely variable
            > Radial adjustment path 80 mm NC axis, infinitely variable
            > Spindle speed: 6000 rpm
            > Tool flight circle min.: 140 mm
            > Tool flight circle max.: 232 mm
            > 1 feed roller axially pneumatically controlled opposite the spindle,
            2 positions

            4. Profiling spindle
            ................................................
            > Position: vertical right
            > Number of tools: variable
            > Motor power: 11 kW
            > Spindle diameter: 50 mm
            > Tool clamping length: 400 mm, with counter bearing
            > Axial adjustment path 350 mm NC axis, infinitely variable
            > Radial adjustment path 80 mm NC axis, infinitely variable
            > Spindle speed: 6000 rpm
            > Tool flight circle min.: 140 mm
            > Tool flight circle max.: 232 mm
            > 2 feed rollers axially pneumatically controlled opposite the spindle,
            8 positions
            > Rung support bar clocked vertically after the last profiling spindle

            5. Profile milling unit (fittings spindle)
            ................................................
            > Position: vertical right
            > Motor power: 3.7 kW
            > Spindle diameter: 40 mm
            > Tool clamping length: 160 mm
            > Axial adjustment path 115 mm NC axis, infinitely variable
            > Radial adjustment path 100 mm NC axis, infinitely variable
            > Spindle speed: 5850 rpm
            > Tool flight circle max.: 210 mm
            > 1 feed roller axially pneumatically controlled opposite the spindle,
            2 positions


            6. Profile milling unit (grooving device from above), in the additional stand
            ................................................
            > Position: working vertically to the right from above
            > Motor power: 3.7 kW
            > Spindle diameter: 40 mm
            > Tool clamping length: 40 mm
            > Axial adjustment range 44 mm, 8 positions using a pneumatic turret
            > Radial adjustment path 100 mm NC axis, infinitely variable
            > Spindle speed: 9,000 rpm
            > Tool flight circle max.: 130 mm

            7. Profiling spindle (grooving device from below, in the additional stand)
            ................................................
            > Position: horizontally below
            > Motor power: 3 kW
            > Spindle diameter: 40 mm
            > Tool clamping length: 125 mm
            > Axial adjustment path 100 mm NC axis, infinitely variable
            > Radial adjustment path 100 mm NC axis, infinitely variable
            > Spindle speed: 5850 rpm
            > Tool flight circle max.: 200 mm
            > 1 feed roller axially pneumatically controlled opposite the spindle,
            2 positions


            Other features
            ................................................

            > online capable
            > Folding device for tear-free folding
            > Milling carriage for milling sashes with frame widths under 500 mm.
            Automatic pneumatic clamping
            > 9 feed rollers controlled up/down after the last profiling spindle
            faster and shorter milling process
            > Feed height adjustment with NC axis
            > Divided pressure ruler on the left, pneumatic, divided for wood widths 40-140
            mm
            > Double parts package
            > Return conveyor for 1-man operation: slat conveyor
            > Screen controls
            > Slanted window device
            > Electronic angle display for sloping windows
            > Control: NEXUS PC control
            > Vario table with horizontal NC axis
            > Automatic central lubrication
            > Air conditioning unit in the control cabinet
            > Machine without processing tools


            If the technical characteristics of this machine do not meet your expectations
            correspond, please contact us. Our long-standing
            Our experienced team will be happy to support you with any adjustments or
            Find a machine that meets your needs!

            (Technical information according to the manufacturer - no guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Window production centre Gubisch Centromat CW 1


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6784 · Window production centre

          Gubisch - Centromat CW 1 - - gebraucht -

          Technical details
          Tenoning spindle 1 Stk.︱Number of milling agregates 4 St.︱Spindle diameter 50 mm︱
          1 for window and door production with 50 mm spindles in the longitudinal profiling. With the following processing stations and options: - One-sided slot machine for straight and sloping connections - Milling machine with glazing bead cutting unit for longitudinal profiling - Circumferential operation with synchronous milling unit and automatic immersion. - Swivel frame support up to 650 mm - Fitting grooving unit - Central control 1.0 crosscut saw automatically plunging in from above - Engine power, including engine brake 3.0 kW - Spindle speed 2800 rpm. - Flight circle diameter 350 mm - Spindle diameter 30 mm Æ - Clamping flange, 1 driver 6 mm Æ TC 42 mm 120 mm dia. - Pneumatic vertical stroke 100 mm - Pneumatic horizontal stroke 160 mm against 2 manual 6-fold turret stops - Chip extraction hood with extraction nozzle 100 mm Æ 2.0 slot unit - Engine power, including engine brake 9.2 kW - Spindle speed 3800 rpm. - flight circle diameter 320 mm max. - Spindle diameter 50 mm - Effective spindle length 300 mm - Pneumatic fixed vertical stroke 2 x 100 mm - suitable for 3 sets of tools - Zero height 10 mm - Chip extraction hood with extraction socket Æ 160 mm 3.0 slot table - Table height above floor 920 mm - Feed automatic, with 2 speeds - Slow 7m/min. - Fast 14 m/min. - Engine power including engine brake 0.21/0.30 kW - Drive can be disengaged for manual feed (oblique cuts) - Pneumatic workpiece clamping - Clamping cylinder 1 piece with 2 additional pressure shoes 3.1 Timber device - Counter wood changer with 2-fold automatic change and with man. rotation of 180 degrees, 2 further subtractions possible, which are then also in automatic mode counter. 3.2 Length stop - Stop system with 3 scales for a) outer frame b) Wings erect on the outside c) Outer wing transversely - Manual adjustment - Length 2300mm - pivotable +/- 60 degrees for inclined windows 3.3 Angle transfer - Automatically via vertically clocked feed roller in the milling feed 4.0 milling machine for longitudinal profiling and folding of windows/doors with the following Aggregates: 4.1 Down milling unit with plunge automatic - synchronization - Automatic immersion can be used for folding - Engine power including engine brake 7.5 kW - Spindle speed 6000 rpm. - flight circle diameter 240 mm max. - Side stops adjustable for zero Æ 140 mm max. of tools 112 mm min. - Zero height 10 mm - Spindle diameter 50 mm Æ - Effective spindle length 100 mm - Pneumatic horizontal stroke 80 mm - Chip extraction hood with extraction socket Æ 120 mm 4.2 Profiling unit - reverse - Engine power including engine brake 9.2 kW - Spindle speed 6000 rpm. - flight circle diameter 240 mm max. - Side stops adjustable for zero Æ 140 mm max. of tools 112 mm min. - Zero height 10 mm - Spindle diameter 50 mm Æ - Effective spindle length 300 mm - Vertical stroke pneumatically fixed 1 x 100 mm suitable for 3 sets of tools a 100 mm 2 x 100 mm - Chip extraction hood with extraction socket Æ 140 mm 4.3 Grooving unit - reverse - Engine power including engine brake 3.0 kW - Spindle speed 6,000 rpm. - flight circle diameter Profile depth 30 mm (hardware groove depth) 200 mm fixed - Zero height 10 mm - Spindle diameter 50 mm Æ - Effective spindle length 100 mm - Horizontal stroke 80 mm - Chip extraction with extraction socket Æ 120 mm 4.4 Glazing bead saw unit - reverse - Engine power including engine brake 3.0 kW - Spindle speed 3,000 rpm. - Spindle diameter 30 mm - Effective spindle length 15 mm - Radius of flight 200 mm - Clamping flange, 1 driver 6 mm Æ TC 42 mm 85 mm Æ - Pneumatic vertical stroke 100 mm - Pneumatically clocked glazing bead removal incl. anti-recoil device - Chip extraction hood with extraction socket Æ 80 mm 4.5 Advance - Motor power 0.75 kW - Feed speed 8 m/min. - Feed roller diameter 100 mm - Roller spacing in the area of ??the processing units 110 mm in the infeed area 200 mm - Feed rollers individually adjustable at an angle to the stop 4.6 Vertical right stops - Height 85mm - Stop 1 + 2 for 1 mm chip removal set - adjustable for zero diameter 112 - 140 mm 5.0 workpiece return device - The finished workpieces come over an inclined roller conveyor back to the serving staff. 6.0 central control - Clear central control panel with standard control and semi-automatic in the slot or profile milling unit (3 programs for window frame production IV). - Single and linked operation with automatic angle transfer function - with recirculation circuit including 4-step control - Grooving unit for edge gear cutters can be controlled at the push of a button - very simple, easy to understand, logically structured handling of the control 7.0 Technical connection data - Compressed air connection 3/8" 8 bar - Compressed air consumption approx. 40 NL/min. (prepared air according to Pneurop 6611) - Extraction air volume 135 m3/min. - Operating voltage 3 phases, 380 volts, 50 Hz. - Total connection value 36.16 kW - Extraction air speed 32 m/sec. - Electrical equipment according to VDE - Loading weight approx. 3500 kg * The machine is designed according to German regulations and standards. * Paint RAL 60 11 green * Tools IV 68/78 wood/aluminium - Technical information according to the manufacturer, without guarantee!
            Tenoning spindle 1 Stk.
            Number of milling agregates 4 St.
            Spindle diameter 50 mm
            Description :
            1 for window and door production
            with 50 mm spindles in the longitudinal profiling.

            With the following processing stations and options:

            - One-sided slot machine for straight and sloping connections
            - Milling machine with glazing bead cutting unit for longitudinal profiling
            - Circumferential operation with synchronous milling unit and automatic
            immersion.
            - Swivel frame support up to 650 mm
            - Fitting grooving unit
            - Central control

            1.0 crosscut saw automatically plunging in from above

            - Engine power, including engine brake 3.0 kW
            - Spindle speed 2800 rpm.
            - Flight circle diameter 350 mm
            - Spindle diameter 30 mm Æ
            - Clamping flange, 1 driver 6 mm Æ
            TC 42 mm 120 mm dia.
            - Pneumatic vertical stroke 100 mm
            - Pneumatic horizontal stroke 160 mm
            against 2 manual 6-fold turret stops
            - Chip extraction hood with extraction nozzle 100 mm Æ

            2.0 slot unit

            - Engine power, including engine brake 9.2 kW
            - Spindle speed 3800 rpm.
            - flight circle diameter 320 mm max.
            - Spindle diameter 50 mm
            - Effective spindle length 300 mm
            - Pneumatic fixed vertical stroke 2 x 100 mm
            - suitable for 3 sets of tools
            - Zero height 10 mm
            - Chip extraction hood with extraction socket Æ 160 mm

            3.0 slot table

            - Table height above floor 920 mm
            - Feed automatic, with 2 speeds
            - Slow 7m/min.
            - Fast 14 m/min.
            - Engine power including engine brake 0.21/0.30 kW
            - Drive can be disengaged for manual feed
            (oblique cuts)
            - Pneumatic workpiece clamping
            - Clamping cylinder 1 piece with 2 additional pressure shoes

            3.1 Timber device
            - Counter wood changer with 2-fold automatic change and with man. rotation of
            180 degrees, 2
            further subtractions possible, which are then also in automatic mode
            counter.

            3.2 Length stop
            - Stop system with 3 scales for a) outer frame
            b) Wings erect on the outside
            c) Outer wing transversely
            - Manual adjustment
            - Length 2300mm
            - pivotable +/- 60 degrees for inclined windows

            3.3 Angle transfer
            - Automatically via vertically clocked feed roller in the milling feed

            4.0 milling machine
            for longitudinal profiling and folding of windows/doors with the following
            Aggregates:

            4.1 Down milling unit with plunge automatic
            - synchronization
            - Automatic immersion can be used for folding
            - Engine power including engine brake 7.5 kW
            - Spindle speed 6000 rpm.
            - flight circle diameter 240 mm max.
            - Side stops adjustable for zero Æ 140 mm max.
            of tools 112 mm min.
            - Zero height 10 mm
            - Spindle diameter 50 mm Æ
            - Effective spindle length 100 mm
            - Pneumatic horizontal stroke 80 mm
            - Chip extraction hood with extraction socket Æ 120 mm

            4.2 Profiling unit

            - reverse
            - Engine power including engine brake 9.2 kW
            - Spindle speed 6000 rpm.
            - flight circle diameter 240 mm max.
            - Side stops adjustable for zero Æ 140 mm max.
            of tools 112 mm min.
            - Zero height 10 mm
            - Spindle diameter 50 mm Æ
            - Effective spindle length 300 mm
            - Vertical stroke pneumatically fixed 1 x 100 mm
            suitable for 3 sets of tools a 100 mm 2 x 100 mm
            - Chip extraction hood with extraction socket Æ 140 mm

            4.3 Grooving unit

            - reverse
            - Engine power including engine brake 3.0 kW
            - Spindle speed 6,000 rpm.
            - flight circle diameter
            Profile depth 30 mm (hardware groove depth) 200 mm fixed
            - Zero height 10 mm
            - Spindle diameter 50 mm Æ
            - Effective spindle length 100 mm
            - Horizontal stroke 80 mm
            - Chip extraction with extraction socket Æ 120 mm

            4.4 Glazing bead saw unit
            - reverse
            - Engine power including engine brake 3.0 kW
            - Spindle speed 3,000 rpm.
            - Spindle diameter 30 mm
            - Effective spindle length 15 mm
            - Radius of flight 200 mm
            - Clamping flange, 1 driver 6 mm Æ
            TC 42 mm 85 mm Æ
            - Pneumatic vertical stroke 100 mm
            - Pneumatically clocked glazing bead removal
            incl. anti-recoil device
            - Chip extraction hood with extraction socket Æ 80 mm

            4.5 Advance
            - Motor power 0.75 kW
            - Feed speed 8 m/min.
            - Feed roller diameter 100 mm
            - Roller spacing
            in the area of ??the processing units 110 mm
            in the infeed area 200 mm
            - Feed rollers individually adjustable at an angle to the stop

            4.6 Vertical right stops
            - Height 85mm
            - Stop 1 + 2 for 1 mm chip removal
            set
            - adjustable for zero diameter 112 - 140 mm

            5.0 workpiece return device
            - The finished workpieces come over an inclined roller conveyor
            back to the serving staff.

            6.0 central control

            - Clear central control panel with standard control and
            semi-automatic
            in the slot or profile milling unit
            (3 programs for window frame production IV).
            - Single and linked operation with automatic angle transfer function
            - with recirculation circuit including 4-step control
            - Grooving unit for edge gear cutters can be controlled at the push of a button
            - very simple, easy to understand, logically structured handling of the control

            7.0 Technical connection data
            - Compressed air connection 3/8" 8 bar
            - Compressed air consumption approx. 40 NL/min.
            (prepared air according to Pneurop 6611)
            - Extraction air volume 135 m3/min.
            - Operating voltage 3 phases, 380 volts, 50 Hz.
            - Total connection value 36.16 kW
            - Extraction air speed 32 m/sec.
            - Electrical equipment according to VDE
            - Loading weight approx. 3500 kg

            * The machine is designed according to German regulations and standards.

            * Paint RAL 60 11 green

            * Tools IV 68/78 wood/aluminium

            - Technical information according to the manufacturer, without guarantee!




        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • 1.500 €
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •