European network of stockholding machinery dealers

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:

          Compressor

          Machinelist: Compressor


          Compressor

          used Other accessories for machine tools Compressor MARK MSM 15 DXM 500 L


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9489130 · Compressor

          MARK - MSM 15 DXM 500 L - - 2014 -

          Technical details
          feed pressure 10,0 bar︱Effective free air delivery 1.680 L/min︱motor 400 V︱0 500 Liter︱weight of the machine ca. 348 kg.︱total power requirement 15,0 kW︱range L-W-H 1240 x 650 x 950 mm︱
          ** Exhibition machine / not yet in use ** new BOGE SOLID model series ** List price: 7.476 euros ** Made in Germany Furnishing: - with container and dryer / can be used immediately - Microprocessor control SOLID base control - Network pressure sensor - Belt driven drive system - low compressed air temperature due to effective aftercooler - lying underneath compressed air tank - including cold compressed air dryer * automatically working with pre- and post-filter ( mounted ) (also available with 7.5 bar)
            feed pressure 10,0 bar
            Effective free air delivery 1.680 L/min
            motor 400 V
            0 500 Liter
            weight of the machine ca. 348 kg.
            total power requirement 15,0 kW
            range L-W-H 1240 x 650 x 950 mm
            Description :
            ** Exhibition machine / not yet in use
            ** new BOGE SOLID model series
            ** List price: 7.476 euros
            ** Made in Germany

            Furnishing:
            - with container and dryer / can be used immediately
            - Microprocessor control SOLID base control
            - Network pressure sensor
            - Belt driven drive system
            - low compressed air temperature due to effective aftercooler
            - lying underneath compressed air tank
            - including cold compressed air dryer
            * automatically working with pre- and post-filter ( mounted )

            (also available with 7.5 bar)


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Compressor BOGE SRMV 390-5


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-60 · Compressor

          BOGE - SRMV 390-5 - - 2014 -

          Technical details
          power capacity 5,5 kW︱feed pressure 15 bar︱liter capacity 2135 l︱total power requirement kW︱weight of the machine ca. 450 kg︱dimensions of the machine ca. 1800 x 1000 x 1000 mm︱
            power capacity 5,5 kW
            feed pressure 15 bar
            liter capacity 2135 l
            weight of the machine ca. 450 kg
            dimensions of the machine ca. 1800 x 1000 x 1000 mm


        • MS Maschinenhandel GmbH
        • Unterdorf 34
        • 6532 Ladis
        • Österreich

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Compressor Airpress APS 50


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-C057 · Compressor

          Airpress - APS 50 - - 2008 -

          Technical details
          Capaciteit 5 m3/min L/min︱Work pressure 10 Bar︱Power 37 kW︱Working hours per day total work hours 6.608 h︱
          Brand Airpress Type APS 50 Year of make 2008 Screw compressor Capacity 5 m3/min Workload 10 Bar Engine power 37 kW Soundproofed Working hours 6.608
            Capaciteit 5 m3/min L/min
            Work pressure 10 Bar
            Power 37 kW
            Working hours per day total work hours 6.608 h
            Description :
            Brand Airpress
            Type APS 50
            Year of make 2008
            Screw compressor
            Capacity 5 m3/min
            Workload 10 Bar
            Engine power 37 kW
            Soundproofed
            Working hours 6.608


        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Compressor INGERSOLL ML 45


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-C058 · Compressor

          INGERSOLL - ML 45 - - 2005 -

          Technical details
          Capaciteit 1.000 L/min︱Work pressure 8 Bar︱Power 45 kW︱Voltage 380 V︱
          Brand Ingersoll Rand Type ML 45 Year of make 2005 Screw compressor Workload 8 Bar Tank content 1.000 L Engine power 45 kW Tension 380 V Soundproofed Includes air dryer Exclusive air tank
            Capaciteit 1.000 L/min
            Work pressure 8 Bar
            Power 45 kW
            Voltage 380 V
            Description :
            Brand Ingersoll Rand
            Type ML 45
            Year of make 2005
            Screw compressor
            Workload 8 Bar
            Tank content 1.000 L
            Engine power 45 kW
            Tension 380 V
            Soundproofed
            Includes air dryer
            Exclusive air tank


        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Compressor COOL TECHNOLOGY EN286-1


          • SK Maschinen-Service GmbH
          • Tackweg 4
          • 47918 Tönisvorst
          • Deutschland

          • 02151 79350
            02151 793535
          • info@sk-maschinen.de
            www.sk-maschinen.de
          #1038-80214 · Compressor

          COOL TECHNOLOGY - EN286-1 - - 1999 -

          Technical details
          power capacity 1,5 kW︱feed pressure 11 bar︱liter capacity 160 l︱weight of the machine ca. 0,15 t︱dimensions of the machine ca. 1,5x0,5x0,8 m︱
          380 V, 50 Hz with plug and cable colour: light grey 2 cylinder, boiler 90 l compressor has been checked in our workshop, electr. testing report included!
            power capacity 1,5 kW
            feed pressure 11 bar
            liter capacity 160 l
            weight of the machine ca. 0,15 t
            dimensions of the machine ca. 1,5x0,5x0,8 m
            Description :
            380 V, 50 Hz with plug and cable
            colour: light grey
            2 cylinder, boiler 90 l
            compressor has been checked in our workshop, electr. testing report included!


        • SK Maschinen-Service GmbH
        • Tackweg 4
        • 47918 Tönisvorst
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Compressor ECO AIR C 5-SS


          • Kurt Steiger Werkzeugmaschinen GmbH
          • Flachstr. 11
          • 65197 Wiesbaden
          • Deutschland

          • +49 (0) 611/421047
            +49 (0) 611/421040
          • info@kurt-steiger.de
            www.kurt-steiger.de
          #2043-120218 · Compressor

          ECO AIR - C 5-SS - - 1990 -

          Technical details
          power capacity kW︱feed pressure bar︱liter capacity l︱total power requirement kW︱weight of the machine ca. t︱required space m︱
          Max. Operating pressure: 10 bar
          effective delivery rate at approx. 7.5 bar: 450 l / min
          Required drive: 1450 rpm, 4 kW
          Drive motor: 380/660 V, 1440 rpm, 5.5
          Air chamber volume: 250 l
          Ppwmuohj
          Required space: 1500 x 600 x 1320 mm
          Weight approx .: 250 kg
            Description :
            Max. Operating pressure: 10 bar

            effective delivery rate at approx. 7.5 bar: 450 l / min

            Required drive: 1450 rpm, 4 kW

            Drive motor: 380/660 V, 1440 rpm, 5.5

            Air chamber volume: 250 l

            Ppwmuohj

            Required space: 1500 x 600 x 1320 mm

            Weight approx .: 250 kg


        • Kurt Steiger Werkzeugmaschinen GmbH
        • Flachstr. 11
        • 65197 Wiesbaden
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Compressor BAUER Schraubenverdichter C10-10-SS


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-23200 · Compressor

          BAUER - Schraubenverdichter C10-10-SS - - 1986 -

          Technical details
          feed pressure 10 bar︱liter capacity 950 l︱revolutions per minute 2925 U/min︱total power requirement 7,5 kW︱weight of the machine ca. 0,2 t︱dimensions of the machine ca. 1,3 x 0,65 x 0,93 m︱
          The single-stage screw compressor with oil injection is a two-shaft rotary lobe machine and is designed for operating pressures between 3.5 and 10 bar.
            feed pressure 10 bar
            liter capacity 950 l
            revolutions per minute 2925 U/min
            total power requirement 7,5 kW
            weight of the machine ca. 0,2 t
            dimensions of the machine ca. 1,3 x 0,65 x 0,93 m
            Description :
            The single-stage screw compressor with oil injection is a two-shaft rotary lobe
            machine and is designed for operating pressures between 3.5 and 10 bar.


        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Compressor Agre


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-C044 · Compressor

          Agre - - - 1986 -

          Technical details
          Work pressure 10 Bar︱Tank content 100 L︱Capacity - m3/min︱
            Work pressure 10 Bar
            Tank content 100 L
            Capacity - m3/min
            Description :



        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Compressor CHIRON ZU 197/3-1


          • Kurt Steiger Werkzeugmaschinen GmbH
          • Flachstr. 11
          • 65197 Wiesbaden
          • Deutschland

          • +49 (0) 611/421047
            +49 (0) 611/421040
          • info@kurt-steiger.de
            www.kurt-steiger.de
          #2043-27081b · Compressor

          CHIRON - ZU 197/3-1 - - 1985 -

          Technical details
          power capacity kW︱feed pressure bar︱liter capacity l︱total power requirement kW︱weight of the machine ca. t︱required space m︱
          volume: 50 l
          maximum operating pressure: 11 bar
          Required space: 980 x 400 x 650 mm
          Purj2q
            Description :
            volume: 50 l

            maximum operating pressure: 11 bar

            Required space: 980 x 400 x 650 mm

            Purj2q


        • Kurt Steiger Werkzeugmaschinen GmbH
        • Flachstr. 11
        • 65197 Wiesbaden
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Compressor MAHLE MSKE 07


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-04846 · Compressor

          MAHLE - MSKE 07 - - 1983 -

          Technical details
          power capacity 7,5 kW︱feed pressure 10 bar︱weight of the machine ca. 300 kg︱
            power capacity 7,5 kW
            feed pressure 10 bar
            weight of the machine ca. 300 kg


        • Christoph Busch GmbH
        • Dieselstr. 22
        • 41352 Korschenbroich
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Compressor ALUP HL 300-22


          • Kurt Steiger Werkzeugmaschinen GmbH
          • Flachstr. 11
          • 65197 Wiesbaden
          • Deutschland

          • +49 (0) 611/421047
            +49 (0) 611/421040
          • info@kurt-steiger.de
            www.kurt-steiger.de
          #2043-26927 · Compressor

          ALUP - HL 300-22 - - 1980 -

          Technical details
          power capacity kW︱feed pressure bar︱liter capacity l︱total power requirement kW︱weight of the machine ca. t︱required space m︱
          stroke volume: 325 l / min
          effective delivery at 15 bar:
          Speed: 955 rpm
          Drive motor: 380 V, 2.2 kW
          Boiler capacity: 250 l
          Tank operating pressure: 15 bar
          Tank requirement: 1600 x 500 x 1000 mm
          Nm7ub
            Description :
            stroke volume: 325 l / min

            effective delivery at 15 bar:

            Speed: 955 rpm

            Drive motor: 380 V, 2.2 kW

            Boiler capacity: 250 l

            Tank operating pressure: 15 bar

            Tank requirement: 1600 x 500 x 1000 mm

            Nm7ub


        • Kurt Steiger Werkzeugmaschinen GmbH
        • Flachstr. 11
        • 65197 Wiesbaden
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Compressor KAESER AS 30-500


          • Kurt Steiger Werkzeugmaschinen GmbH
          • Flachstr. 11
          • 65197 Wiesbaden
          • Deutschland

          • +49 (0) 611/421047
            +49 (0) 611/421040
          • info@kurt-steiger.de
            www.kurt-steiger.de
          #2043-26804 · Compressor

          KAESER - AS 30-500 - - 1977 -

          Technical details
          power capacity kW︱feed pressure bar︱liter capacity l︱total power requirement kW︱weight of the machine ca. t︱required space m︱
          maximum operating pressure: 7.5 bar
          effective delivery quantity: 2.85 m³/h
          Speed: 2930 UPM
          Drive motor: 380 V, 18.5 kW
          Njapb
          Space requirements: 1265 x 675 x 980 mm
          Weight: 470 kg
            Description :
            maximum operating pressure: 7.5 bar

            effective delivery quantity: 2.85 m³/h

            Speed: 2930 UPM

            Drive motor: 380 V, 18.5 kW

            Njapb

            Space requirements: 1265 x 675 x 980 mm

            Weight: 470 kg


        • Kurt Steiger Werkzeugmaschinen GmbH
        • Flachstr. 11
        • 65197 Wiesbaden
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Compressor METABO Basic 240


          • Kurt Steiger Werkzeugmaschinen GmbH
          • Flachstr. 11
          • 65197 Wiesbaden
          • Deutschland

          • +49 (0) 611/421047
            +49 (0) 611/421040
          • info@kurt-steiger.de
            www.kurt-steiger.de
          #2043-25894 a · Compressor

          METABO - Basic 240 - - -

          Technical details
          power capacity kW︱feed pressure bar︱liter capacity l︱total power requirement kW︱weight of the machine ca. t︱required space m︱
          Suction capacity: 220 l / min
          effective delivery quantity: 105 l / min
          Maximum working pressure: 8 bar
          Boiler capacity: 24 l
          Drive motor: 230 V, 1,1 kW
          Space: 620 x 330 x 630 mm
          Pw39hxoxc
          Weight: 21.5 kg
            Description :
            Suction capacity: 220 l / min

            effective delivery quantity: 105 l / min

            Maximum working pressure: 8 bar

            Boiler capacity: 24 l

            Drive motor: 230 V, 1,1 kW

            Space: 620 x 330 x 630 mm

            Pw39hxoxc

            Weight: 21.5 kg


        • Kurt Steiger Werkzeugmaschinen GmbH
        • Flachstr. 11
        • 65197 Wiesbaden
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Compressor CAIR COMPANY CairMobil 730 Plus


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8489064 · Compressor

          CAIR COMPANY - CairMobil 730 Plus - - -

          Technical details
          feed pressure 10,0 bar︱intake capacity 727 L/min︱Effective free air delivery 582 L/min︱Receiver capacity 90,0 Ltr.︱motor 400 V︱power capacity 4,0 kW︱weight of the machine ca. 91,0 kg.︱dimensions of the machine ca. 1040 x 450 x 850 mm︱
          Description : - mobile craftsman piston compressor - High-quality processed, 2-stage compressor block - with 2 cast iron cylinders and optimum efficiency - Finely ribbed cylinder and cylinder head for optimal temperature dissipation - low compressor speed to reduce the compression temperature and minimizing wear and tear - Very low residual oil content in the compressed air thanks to precision piston rings - Generously dimensioned solid rubber wheels and castors at the front - the start-up relief takes place via a mechanical vent valve - powder-coated compressed air tank in RAL 7035 - Built in accordance with the European Pressure Equipment Directive - all fittings are sealed with easily removable special adhesive and can easily be exchanged if necessary The standard scope of delivery includes: - Condor pressure switch MDR 3 - a high quality filter pressure reducer - two pressure gauges - a condensate drain tap - a pre-assembled connection cable with 5-pin. connector and phase reversal
            feed pressure 10,0 bar
            intake capacity 727 L/min
            Effective free air delivery 582 L/min
            Receiver capacity 90,0 Ltr.
            motor 400 V
            power capacity 4,0 kW
            weight of the machine ca. 91,0 kg.
            dimensions of the machine ca. 1040 x 450 x 850 mm
            Description :
            Description :
            - mobile craftsman piston compressor
            - High-quality processed, 2-stage compressor block
            - with 2 cast iron cylinders and optimum efficiency
            - Finely ribbed cylinder and cylinder head for optimal temperature dissipation
            - low compressor speed to reduce the compression temperature
            and minimizing wear and tear
            - Very low residual oil content in the compressed air thanks
            to precision piston rings
            - Generously dimensioned solid rubber wheels and castors at the front
            - the start-up relief takes place via a mechanical vent valve
            - powder-coated compressed air tank in RAL 7035
            - Built in accordance with the European Pressure Equipment Directive
            - all fittings are sealed with easily removable special adhesive
            and can easily be exchanged if necessary

            The standard scope of delivery includes:
            - Condor pressure switch MDR 3
            - a high quality filter pressure reducer
            - two pressure gauges
            - a condensate drain tap
            - a pre-assembled connection cable with 5-pin. connector and phase reversal


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Compressor CAIR COMPANY CairMobil 350


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8489063 · Compressor

          CAIR COMPANY - CairMobil 350 - - -

          Technical details
          feed pressure 10,0 bar︱intake capacity 345 L/min︱Effective free air delivery 228 L/min︱Receiver capacity 50,0 Ltr.︱motor 230 V︱power capacity 2,2 kW︱weight of the machine ca. 51,0 kg.︱dimensions of the machine ca. 800 x 390 x 750 mm︱
          Description : - mobile craftsman piston compressor - High-quality processed 1-stage compressor block - with 2 cylinders and optimal efficiency - Finely ribbed cylinder and cylinder head for optimal temperature dissipation - low compressor speed to reduce the compression temperature and minimizing wear and tear - Very low residual oil content in the compressed air thanks to precision piston rings - powder-coated compressed air tank in RAL 7035 - Built in accordance with the European Pressure Equipment Directive - all fittings are sealed with easily removable special adhesive and can easily be exchanged if necessary - the start-up relief takes place via a mechanical vent valve The standard scope of delivery includes: - Solid rubber wheels - a branded pressure switch - a condensate drain plug - a pressure reducer - two pressure gauges
            feed pressure 10,0 bar
            intake capacity 345 L/min
            Effective free air delivery 228 L/min
            Receiver capacity 50,0 Ltr.
            motor 230 V
            power capacity 2,2 kW
            weight of the machine ca. 51,0 kg.
            dimensions of the machine ca. 800 x 390 x 750 mm
            Description :
            Description :
            - mobile craftsman piston compressor
            - High-quality processed 1-stage compressor block
            - with 2 cylinders and optimal efficiency
            - Finely ribbed cylinder and cylinder head for optimal temperature dissipation
            - low compressor speed to reduce the compression temperature
            and minimizing wear and tear
            - Very low residual oil content in the compressed air thanks to
            precision piston rings
            - powder-coated compressed air tank in RAL 7035
            - Built in accordance with the European Pressure Equipment Directive
            - all fittings are sealed with easily removable special adhesive
            and can easily be exchanged if necessary
            - the start-up relief takes place via a mechanical vent valve

            The standard scope of delivery includes:
            - Solid rubber wheels
            - a branded pressure switch
            - a condensate drain plug
            - a pressure reducer
            - two pressure gauges


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Compressor CAIR COMPANY CairMobil 180 Oelfrei


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8489062 · Compressor

          CAIR COMPANY - CairMobil 180 Oelfrei - - -

          Technical details
          feed pressure 8,0 bar︱intake capacity 180 L/min︱Effective free air delivery 112 L/min︱Receiver capacity 6,0 Ltr.︱motor 230 V︱power capacity 1,1 kW︱weight of the machine ca. 14,0 kg.︱dimensions of the machine ca. 380 x 310 x 490 mm︱
          Description : - portable craftsman piston compressor - permissible duty cycle up to 30% - *1-stage, direct-coupled, single-cylinder airend - Compressor mechanics working completely OIL-FREE - Very compact design for easy handling - Finely ribbed cylinder and cylinder head - powder-coated compressed air tank in RAL 7035 - Built in accordance with the European Pressure Equipment Directive - the start-up relief takes place via a mechanical vent valve The standard scope of delivery includes: - an automatically regulating pressure switch - a condensate drain plug - a pressure reducer - two pressure gauges - Safety valve - pre-assembled connection cable with plug
            feed pressure 8,0 bar
            intake capacity 180 L/min
            Effective free air delivery 112 L/min
            Receiver capacity 6,0 Ltr.
            motor 230 V
            power capacity 1,1 kW
            weight of the machine ca. 14,0 kg.
            dimensions of the machine ca. 380 x 310 x 490 mm
            Description :
            Description :
            - portable craftsman piston compressor
            - permissible duty cycle up to 30%
            - *1-stage, direct-coupled, single-cylinder airend
            - Compressor mechanics working completely OIL-FREE
            - Very compact design for easy handling
            - Finely ribbed cylinder and cylinder head
            - powder-coated compressed air tank in RAL 7035
            - Built in accordance with the European Pressure Equipment Directive
            - the start-up relief takes place via a mechanical vent valve

            The standard scope of delivery includes:
            - an automatically regulating pressure switch
            - a condensate drain plug
            - a pressure reducer
            - two pressure gauges
            - Safety valve
            - pre-assembled connection cable with plug


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Compressor CAIR COMPANY CairMobil 540


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8489065 · Compressor

          CAIR COMPANY - CairMobil 540 - - -

          Technical details
          feed pressure 10,0 bar︱intake capacity 539 L/min︱Effective free air delivery 377 L/min︱Receiver capacity 90,0 Ltr.︱motor 400 V︱power capacity 3,0 kW︱weight of the machine ca. 80,0 kg.︱dimensions of the machine ca. 1040 x 450 x 850 mm︱
          Description : - mobile craftsman piston compressor - High-quality processed 1-stage compressor block - with 2x cast iron cylinders and optimum efficiency - Finely ribbed cylinder and cylinder head - for optimum temperature dissipation - low compressor speed to reduce the compression temperature and minimizing wear and tear - Very low residual oil content in the compressed air thanks to precision piston rings - Generously dimensioned solid rubber wheels and castors at the front - the start-up relief takes place via a mechanical vent valve - Powder-coated compressed air tank in RAL 7035 - Built in accordance with the European Pressure Equipment Directive - all fittings are sealed with easily removable special adhesive and can easily be exchanged if necessary The standard scope of delivery includes: - Condor pressure switch MDR 3 - a high quality filter pressure reducer - two pressure gauges - a condensate drain tap - pre-assembled connection cable with 5-pin. plug and phase changer
            feed pressure 10,0 bar
            intake capacity 539 L/min
            Effective free air delivery 377 L/min
            Receiver capacity 90,0 Ltr.
            motor 400 V
            power capacity 3,0 kW
            weight of the machine ca. 80,0 kg.
            dimensions of the machine ca. 1040 x 450 x 850 mm
            Description :
            Description :
            - mobile craftsman piston compressor
            - High-quality processed 1-stage compressor block
            - with 2x cast iron cylinders and optimum efficiency
            - Finely ribbed cylinder and cylinder head
            - for optimum temperature dissipation
            - low compressor speed to reduce the compression temperature
            and minimizing wear and tear
            - Very low residual oil content in the compressed air thanks
            to precision piston rings
            - Generously dimensioned solid rubber wheels and castors at the front
            - the start-up relief takes place via a mechanical vent valve
            - Powder-coated compressed air tank in RAL 7035
            - Built in accordance with the European Pressure Equipment Directive
            - all fittings are sealed with easily removable special adhesive
            and can easily be exchanged if necessary

            The standard scope of delivery includes:
            - Condor pressure switch MDR 3
            - a high quality filter pressure reducer
            - two pressure gauges
            - a condensate drain tap
            - pre-assembled connection cable with 5-pin. plug and phase changer


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Compressor NN 02063 A


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-C056 · Compressor

          NN - 02063 A - - -

          Technical details
          CNC brand - ︱CNC model - ︱Control -
          Air tank Working pressure: 120 Bar Tank capacity: 150 L.
            CNC brand -
            CNC model -
            Control -
            Description :
            Air tank
            Working pressure: 120 Bar
            Tank capacity: 150 L.


        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Compressor Sullair SEC35E7,5


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-C021 · Compressor

          Sullair - SEC35E7,5 - - -

          Technical details
          Capacity 2,94 m3/min︱Power 18,5 kW︱Working houres 4400 h︱
          Screw compressor With air dryer
            Capacity 2,94 m3/min
            Power 18,5 kW
            Working houres 4400 h
            Description :
            Screw compressor
            With air dryer


        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Compressor Deltech ARA 03 F


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-M772 · Compressor

          Deltech - ARA 03 F - - -

          Technical details
          Work pressure 15 Bar︱Capacity - m3/min︱Capacity - L/S︱
          Air dryer Work pressure: 15 Bar Voltage: 220 V
            Work pressure 15 Bar
            Capacity - m3/min
            Capacity - L/S
            Description :
            Air dryer
            Work pressure: 15 Bar
            Voltage: 220 V



        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Compressor NORGREN R24-200-RNLG


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3398 · Compressor

          NORGREN - R24-200-RNLG - - -

          Technical details
          connection G 1/4 ︱adjustable from - up to 0,7 - 8 bar︱weight 0,86 kg︱
          high flow pressure regulator body material: zinc alloy withour gauge manual included 10 pieces on stock!
            connection G 1/4
            adjustable from - up to 0,7 - 8 bar
            weight 0,86 kg
            Description :
            high flow pressure regulator

            body material: zinc alloy
            withour gauge
            manual included
            10 pieces on stock!


        • WeMa Antonius Pigge GmbH
        • Barnstorfer Str. 3
        • 49424 Goldenstedt
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Compressor Brown KS 1000


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-C054 · Compressor

          Brown - KS 1000 - - -

          Technical details
          Capaciteit 1000 L/min︱Work pressure 10 Bar︱Power 7,5 kW︱Voltage 400 V︱
          10 pK 15,6 A
            Capaciteit 1000 L/min
            Work pressure 10 Bar
            Power 7,5 kW
            Voltage 400 V
            Description :
            10 pK
            15,6 A


        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact

          Faceplate

          used Other accessories for machine tools Faceplate LORENZ Planscheibe LS630


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-23156 · Faceplate

          LORENZ - Planscheibe LS630 - - unbekannt -

          Technical details
          faceplate diameter 1000 mm︱internal diameter 400 / 90 mm︱weight 285 kg︱
            faceplate diameter 1000 mm
            internal diameter 400 / 90 mm
            weight 285 kg


        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Faceplate LORENZ Planscheibe


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-23157 · Faceplate

          LORENZ - Planscheibe - - unbekannt -

          Technical details
          faceplate diameter 700 mm︱internal diameter 105 mm︱weight 450 kg︱height 340 mm︱
            faceplate diameter 700 mm
            internal diameter 105 mm
            weight 450 kg
            height 340 mm


        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          •   
          •