---

Centerless cylindrical grinding machine Fabr. Lidköping Type: 3B Construction year: about 1974 Working range: 0,5 - 125 mm Ø recommended size for bars: 2,5 - 75 mm Ø Very good machine. with control cabinet Photos on request Total weight about 5 to.

---

CENTERLESS ROUND GRINDING MACHINE FOR BARS AND TUBES constr.: LIDKÖPING type: CL 4 B year: 1965 working range: bars: 1 - 100 mm Ø with tables with electrical cabinet total weight: approx. 7 to.

---

CENTERLESS ROUND GRINDING MACHINE FOR BARS AND TUBES constr.: LIDKÖPING type: CL 4 B year: 1978 working range: bars: 1 - 100 mm Ø Main motor: 30 kW, 380 V, 50 Hz, 1460 rpm Feed motor: 1.73 kW with tables with electrical cabinet total weight: approx. 6,4 to. Photos on request

---

CENTERLESS GRINDING MACHINE for bars and tubes Constr.: LIDKÖPING Type: CL 5 B year: 1977 condition: good working range: bars: (7) - 100 mm Ø peripheral speed: 45 m/s grinding disk: Ø 660 mm, width: 254 mm, bore: 380 mm, supported by bearings at both sides, drive: 60 kW, 380/400 V, 50 Hz Regulating disk: Ø 406 mm, width: 254 mm, bore: 280 mm, supported by bearings at both sides, drive: 10 kW, 380/400 V, 50 Hz with new drive motors Working height mid of spindles: 1.060 mm Total weight: approx. 9 to. Photos and price on request

---

CENTERLESS GRINDING MACHINE for bars and tubes Constr.: LIDKÖPING Type: CL 5 B year: 1980 condition: good working range: bars: (7) - 100 mm Ø peripheral speed: 45 m/s grinding disk: Ø 660 mm, width: 254 mm, bore: 380 mm, supported by bearings at both sides drive: 68 kW, 380/400 V, 50 Hz Regulating disk: Ø 406 mm, width: 254 mm, bore: 280 mm, supported by bearings at both sides 6 kW, 380/400 V, 50 Hz, direct current Working height mid of spindles: 1.060 mm The line consists of: ================ - driven entry roller channel - grinding machine complete - hydraulic station for reshaping device - driven exit roller channel - electrical cabinet - emulsion cleaning basin - Spares: 1 spare grinding wheel, complete - documentation Total weight: approx. 14,5 to.

---

Super Finishing Machine for finishing of piston rods Make NAGEL Type VarioFin SCD-AS Year of construction 2011 Machining- Ø 12 - 120 mm Processing length 100 - 8000 mm complete system with - feed roller table - machine - measuring device - exit roller table - circulating roller table - electrical control cabinet Infeed 400 V, 50 Hz Control voltage 24 V DC Total connection approx. 12 kW numerous tools are included former factory price of the plant over 700 000 EURO more photos on request

---

CENTERLESS GRINDING MACHINE constr: SCHUMAG Type: 40/160 year: condition: good working range Ø: 15 - 100 mm grinding disk-Ø: max. 600 mm peripheral speed: 35/45/60 m/sec regulating disk-Ø: max. 350 mm rotation: 15 - 300 rpm grinding speed: it was run only with 5 - 6 m per minute, but it would also run faster bar lengths: 8 m grinding motor: 50 - 110 kW Scope of delivery: =============== - inlet rack - inlet chute for 8 m bars - main machine body - LASER measuring control - outlet chute - hydraulic system - electrical cabinet, SIEMENS S5 control - oil mist exhauster - various spares and accessories, for example : 1 spare grinding spindle Total weight: approx. 15,5 to.

---

CENTERLESS GRINDING MACHINE constr: SCHUMAG Type: RSM 60 year: condition: good working range Ø: 15 - 100/160 mm grinding disk-Ø: max. 600 mm peripheral speed: 35/45/60 m/sec regulating disk-Ø: max. 350 mm rotation: 15 - 300 rpm grinding speed: it was run only with 5 - 6 m per minute, but it would also run faster bar lengths: 8 m grinding motor: 50 - 110 kW Scope of delivery: =============== - inlet rack - inlet chute for 8 m bars - main machine body - LASER measuring control - outlet chute - hydraulic system - electrical cabinet, SIEMENS S5 control - oil mist exhauster - various spares and accessories, for example : 1 spare grinding spindle Total weight: approx. 15,5 to.

---

CENTERLESS GRINDING MACHINE constr: SCHUMAG Type: RSM 60 year: 1986 condition: good working range Ø: 15 - 100/160 mm grinding disk-Ø: max. 600 mm peripheral speed: 35/45/60 m/sec regulating disk-Ø: max. 350 mm rotation: 15 - 300 rpm grinding speed: it was run only with 5 - 6 m per minute, but it would also run faster bar lengths: 8 m grinding motor: 50 - 110 kW Scope of delivery: =============== - inlet rack - inlet chute for 8 m bars - main machine body - LASER measuring control - outlet chute - hydraulic system - electrical cabinet, SIEMENS S5 control - oil mist exhauster - various spares and accessories, for example : 1 spare grinding spindle Total weight: approx. 15,5 to.