Pilger mill
Machinelist: Pilger mill
Pilger mill
- Franz Teutenberg GmbH & Co KG
- Am Nordkanal 34-36
- 47877 Willich
- Deutschland
-
02154 95790
02154 9579 29 -
info@teutenberg-maschinen.com
www.teutenberg-maschinen.com
#1132-403156 · Pilger mill
MANNESMANN-MEER - KPW 75 VRM - - 1972 / 2006 -
Technical details
COLD PILGER ROLLING MILL Construction MANNESMANN-MEER Type KPW 75 VRM Condition Very good, i.e. the line was completely refurbished / renewed in 2006 NEW TECHNOLOGY: Gear box with internal mass balancing, i.e. there is NO vertical counter weight which is going into the ground. Working range: ============ Entry pressed tubes: Diameter: min./max. 40 / 85 mm Wall thickness: min./max. 2,5 - 14 mm Exit pilgered tubes: min./max. 20 / 60 mm Wall thickness: min./max. 1,2 - 8,5 mm Max. loop length: 13,5 m Advancing range: min./max. 3,5 - 21 mm/stroke Rpm range: 60 - 160 Rpm Tools: Full ring system, dia. 370 mm, width: 170 mm Mandrel 960 mm usuable length: Capacity: The line was running on Non-Ferrous material producing 21.000 t./y. NEW Main motor: DC drive, 317 - 323 kW, 320 - 440 V, 50 cycles The line consists of: ================ - Material loading magazine - Driven entry channel with pushing device (48/60 kW) - Advancing unit with turning gear with: 1 motor for the turning rotation 1 motor for the advancing movement of the tube - Loop channel - Entry clamping chuck - Rolling chamber - Crankshaft housing (cam disk drive) with NEW gear and DC motor - 6 m NEW exit roll channel - 3 NEW hydraulics - NEW Electrical cabinet with SIEMENS S 7 control system Spares: 1 pair of pilger rolls The line can be still seen in operation. Photos available upon request.
- Franz Teutenberg GmbH & Co KG
- Am Nordkanal 34-36
- 47877 Willich
- Deutschland
-
02154 95790
02154 9579 29 -
info@teutenberg-maschinen.com
www.teutenberg-maschinen.com
#1132-403665 · Pilger mill
MANNESMANN-MEER - KPW 75 VRM - - 1972 / 2006 -
Technical details
COLD PILGER ROLLING MILL Construction MANNESMANN-MEER Type KPW 75 VRM Condition Very good, i.e. the line was completely refurbished / renewed in 2006 NEW TECHNOLOGY: Gear box with internal mass balancing, i.e. there are NO vertical counter weights which are going into the ground. Working range: ============ Entry pressed tubes: Diameter: min./max. 40 / 85 mm Wall thickness: min./max. 2,5 - 14 mm Exit pilgered tubes: min./max. 20 / 60 mm Wall thickness: min./max. 1,2 - 8,5 mm Max. loop length: 13,5 m Advancing range: min./max. 3,5 - 21 mm/stroke Rpm range: 60 - 160 Rpm Tools: Full ring system, dia. 370 mm, width: 170 mm Mandrel 960 mm usuable length: Capacity: The line was running on Non-Ferrous material producing 21.000 t./y. NEW Main motor: DC drive, 317 - 323 kW, 320 - 440 V, 50 cycles The line consists of: ================ - Material loading magazine - Driven entry channel with pushing device (48/60 kW) - Advancing unit with turning gear with: 1 motor for the turning rotation 1 motor for the advancing movement of the tube - Loop channel - Entry clamping chuck - Rolling chamber - Crankshaft housing (cam disk drive) with NEW gear and DC motor - 6 m NEW exit roll channel - 3 NEW hydraulics - NEW Electrical cabinet with SIEMENS S 7 control system Various spare part including pilger rolls The line can be still seen in operation. Photos available upon request.
- Franz Teutenberg GmbH & Co KG
- Am Nordkanal 34-36
- 47877 Willich
- Deutschland
-
02154 95790
02154 9579 29 -
info@teutenberg-maschinen.com
www.teutenberg-maschinen.com
#1132-403678 · Pilger mill
MANNESMANN-MEER - KPW 75 VRM - - 1974 / modern. 1995 -
Technical details
COLD PILGER ROLLING MILL Construction MANNESMANN-MEER Type KPW 75 VRM Condition Very good 1995 modernization of the existing line. Working range: ============== Entry pressed tubes: Diameter: min./max. 40/85 mm Wall thickness: min./max. 2,5 - 14 mm Exit pilgered tubes: min./max. 20 / 60 mm Wall thickness: min./max. 1,2 - 8,5 mm Max. loop lenth: 13,5 m Advancing range: min./max. 3,5 - 18 mm/stroke Rpm range: 60 - 120 Rpm Tools: Full ring system, dia. 370 mm, width: 170 mm Mandrel 960 mm usuable length: Capacity: The line was running on Non-Ferrous material producing 21.000 t./y. NEW Main motor: DC drive, 317 - 323 kW, 320 - 440 V, 50 cycles The line consists of: ===================== - Material loading magazine - Driven entry channel with pushing device (48/60 kW) - Advancing unit with turning gear with: 1 motor for the turning rotation 1 motor for the advancing movement of the tube - Loop channel - Entry clamping chuck - Rolling chamber - Crankshaft housing (cam disk drive) with NEW gear and DC motor - 6 m NEW exit roll channel - 3 New hydraulics - NEW Electrical cabinet with SIEMENS S 7 control system Various spare parts including pilger rolls The system can still be viewed at the seller. Photos available upon request.
Trader Profile: Franz Teutenberg GmbH & Co KG
Contact Trader
Am Nordkanal 34-36
47877 - Willich
Deutschland
02154 95790">02154 95790
02154 9579 29
info@teutenberg-maschinen.com
www.teutenberg-maschinen.com
Profile of Trader
Franz Teutenberg-Maschinen GmbH & Co KG
Our company Franz Teutenberg GmbH & Co KG was founded in 1966 and since then is specialised in the commerce with second hand machines and installations for rolling mills, semi finishing mills and drawing mills working on wire, bars, sheet and plate, strips and tubes.
We stock more than 100 special machines on a floor area of about 3.000 sqm.
We can offer you new or hardly used machines which have either been sold by their previous owners owing to reorganization measures or original from bankrupts estates. We also stock older special-purpose production machines and installations which can still give many years of service, thus enabling you to achieve a considerable saving in capital expenditure.
In addition, we also offer the mediation:
- of new machines
- of overhauling of machines
- of repair or modernisation of machines.
Adresse
Franz Teutenberg GmbH & Co KG
Am Nordkanal 34-36
D-47877 Willich
(Düsseldorf Flughafen)
Wie Sie zu uns finden
Sie erreichen uns über die A 52 in Richtung Düsseldorf wie folgt: Ausfahrt Willich Schiefbahn, links. Bis zur nächsten Ampelkreuzung, rechts. Vorfahrtsstraße folgen, 2. Straße links (= Am Nordkanal).
Sie erreichen uns über die A 52 in Richtung Mönchengladbach wie folgt: Ausfahrt Willich Schiefbahn, rechts. Bis zur nächsten Ampelkreuzung, rechts. Vorfahrtsstraße folgen, 2. Straße links (= Am Nordkanal).
TOP Manufacturer:
Am Nordkanal 34-36
Contact Trader
Am Nordkanal 34-36
47877 - Willich
Deutschland
02154 95790
02154 9579 29
info@teutenberg-maschinen.com
www.teutenberg-maschinen.com
Contact person: