European network of stockholding machinery dealers

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:

          bending machine horizontal

          Machinelist: bending machine horizontal


          bending machine horizontal

          used Sheet metal working / shaeres / bending bending machine horizontal RHTC PROFI PRESS HB - 28


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-6284 · bending machine horizontal

          RHTC - PROFI PRESS HB - 28 - - NEU (2021) -

          Technical details
          pressure 28 t︱stroke 180 mm︱table-size 300 x 550 mm︱diameter of piston 130 mm︱work speed min. 2 m/sec︱work speed max. 9,8 m/sec︱return speed 20 mm/sec︱Max. pressure 200 bar︱weight of the machine ca. 0,65 t︱total power requirement 4 kW︱dimensions of the machine ca. 1,15 x 0,75 x 1,1 m︱
          • The horizontal bending and straightening press from Profi Press is a universal one Hydraulic press specially designed for performing bending, profiling and Straightening work is designed. The applications of the machine are different and depend on the accessories that are on the work table, the Tool holder and are installed in the holes and pin holes. • The HB-28 model is used for light bending measurements on the work table equipped with an angle scale, and the press can also be equipped with tools are supplied (for example block punching) that are placed on the tool holder Can be assembled, as well as tools that are in the holes and pin holes can be installed to carry out various types of work. • The hydraulic system can be adjusted with the help of the pressure and flow adjustment valves can be regulated, which is the pressing force and the speed of the press influence. The press is equipped with a built-in manometer. • The control panel is used to operate and display the piston stroke and for Choice between manual or automatic operation, and the HB-28 model is also with a built-in memory for up to 4 different programs fitted. • Operation is via electric foot pedals. • The Profi Press HB-28 model can be equipped with various optional accessories hearing parts and tools for installation on the workbench and the Tool holder to be delivered.
            pressure 28 t
            stroke 180 mm
            table-size 300 x 550 mm
            diameter of piston 130 mm
            work speed min. 2 m/sec
            work speed max. 9,8 m/sec
            return speed 20 mm/sec
            Max. pressure 200 bar
            weight of the machine ca. 0,65 t
            total power requirement 4 kW
            dimensions of the machine ca. 1,15 x 0,75 x 1,1 m
            Description :
            • The horizontal bending and straightening press from Profi Press is a
            universal one Hydraulic press specially designed for performing bending,
            profiling and Straightening work is designed. The applications of the machine
            are different and depend on the accessories that are on the work table, the
            Tool holder and are installed in the holes and pin holes.
            • The HB-28 model is used for light bending measurements on the work table
            equipped with an angle scale, and the press can also be equipped with tools
            are supplied (for example block punching) that are placed on the tool holder
            Can be assembled, as well as tools that are in the holes and pin holes
            can be installed to carry out various types of work.
            • The hydraulic system can be adjusted with the help of the pressure and flow
            adjustment valves can be regulated, which is the pressing force and the speed
            of the press influence. The press is equipped with a built-in manometer.
            • The control panel is used to operate and display the piston stroke and for
            Choice between manual or automatic operation, and the HB-28 model
            is also with a built-in memory for up to 4 different programs
            fitted.
            • Operation is via electric foot pedals.
            • The Profi Press HB-28 model can be equipped with various optional accessories
            hearing parts and tools for installation on the workbench and the
            Tool holder to be delivered.


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending bending machine horizontal ZOPF T 300 Multiprogramm


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4040186 · bending machine horizontal

          ZOPF - T 300 Multiprogramm - - Neu -

          Technical details
          300 kN︱stroke length max. 235 mm︱ 200x24 mm︱bending capacity max. - round 60x4,0 mm︱toolpiece height max. 250 mm︱ 660x1250 mm︱work height max. 900 mm︱return speed 20 mm/sec︱working feed 10 mm/sec︱total power requirement 3 kW︱weight 950 kg︱
          Domestic equipments: - semi-automatic NC control (99 programs with 16 steps each) - incl. bending bolt (without punch) - Incl. tool holder for dies - incl. foot pedal Equipment: - Stamp, smallest U = 145 mm 85 °    H = 250 mm, R = 5 mm - Quick change Monomatrize 85 °    H = 250 mm, V = 63 mm
            300 kN
            stroke length max. 235 mm
            200x24 mm
            bending capacity max. - round 60x4,0 mm
            toolpiece height max. 250 mm
            660x1250 mm
            work height max. 900 mm
            return speed 20 mm/sec
            working feed 10 mm/sec
            total power requirement 3 kW
            weight 950 kg
            Description :
            Domestic equipments:
            - semi-automatic NC control (99 programs with 16 steps each)
            - incl. bending bolt (without punch)
            - Incl. tool holder for dies
            - incl. foot pedal

            Equipment:
            - Stamp, smallest U = 145 mm 85 °
               H = 250 mm, R = 5 mm
            - Quick change Monomatrize 85 °
               H = 250 mm, V = 63 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending bending machine horizontal ZOPF T 100 digital


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-9030006 · bending machine horizontal

          ZOPF - T 100 digital - - Neu -

          Technical details
          pressure 100 kN︱stroke 0-200 mm︱table-size 450 x 1000 mm︱working speed: 6-10 mm/ sec.︱return speed 20 mm/sec︱work height max. 900 mm︱toolpiece height max. 200 mm︱total power requirement 1,5 kW︱bending capacity max. - round 42x3,2 mm︱ 150x10 mm︱weight 320 kg︱dimensions 1010x480x1120 mm︱
            pressure 100 kN
            stroke 0-200 mm
            table-size 450 x 1000 mm
            working speed: 6-10 mm/ sec.
            return speed 20 mm/sec
            work height max. 900 mm
            toolpiece height max. 200 mm
            total power requirement 1,5 kW
            bending capacity max. - round 42x3,2 mm
            150x10 mm
            weight 320 kg
            dimensions 1010x480x1120 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending bending machine horizontal FASTECH FP 40


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-7181 · bending machine horizontal

          FASTECH - FP 40 - - NEU -

          Technical details
          pressure 40 t︱stroke 285 mm︱table-size 660 x 1250 mm︱work speed 10,0 mm/sec︱return speed 10,0 mm/sec︱weight of the machine ca. 1,5 t︱total power requirement 4,0 kW︱dimensions of the machine ca. 1,45 x 0,65 x 1,8 m︱
          Equipment: - hydraulic horizontal bending machine - solid work surface stabilized steel - machine made of hardened and ground forged steel - Digital display for stroke adjustment - 1x tool kit - double foot switch
            pressure 40 t
            stroke 285 mm
            table-size 660 x 1250 mm
            work speed 10,0 mm/sec
            return speed 10,0 mm/sec
            weight of the machine ca. 1,5 t
            total power requirement 4,0 kW
            dimensions of the machine ca. 1,45 x 0,65 x 1,8 m
            Description :
            Equipment: - hydraulic horizontal bending machine - solid work surface
            stabilized steel - machine made of hardened and ground forged steel -
            Digital display for stroke adjustment - 1x tool kit - double foot switch


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending bending machine horizontal ZOPF T 200 Multiprogramm


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4040221 · bending machine horizontal

          ZOPF - T 200 Multiprogramm - - Neu -

          Technical details
          200 kN︱stroke length max. 200 mm︱working feed 10 mm/sec︱return speed 20 mm/sec︱ 480x1060 mm︱work height max. 900 mm︱toolpiece height max. 200 mm︱total power requirement 2,2 kW︱ 200x12 mm︱bending capacity max. - round 48x4,0 mm︱weight 500 kg︱Overall size 1010x480x1120 mm︱
          Domestic equipments: - with semi-automatic control (99 programs with 16 steps each) - including bending bolt (without punch) - Tool holder for dies - Foot pedal Equipment: - Stamp, small U = 145 mm 85 °, H = 200 mm, R = 5 mm - Quick change monometer 85 °, H = 200 mm, V = 63 mm
            200 kN
            stroke length max. 200 mm
            working feed 10 mm/sec
            return speed 20 mm/sec
            480x1060 mm
            work height max. 900 mm
            toolpiece height max. 200 mm
            total power requirement 2,2 kW
            200x12 mm
            bending capacity max. - round 48x4,0 mm
            weight 500 kg
            Overall size 1010x480x1120 mm
            Description :
            Domestic equipments:
            - with semi-automatic control (99 programs with 16 steps each)
            - including bending bolt (without punch)
            - Tool holder for dies
            - Foot pedal

            Equipment:
            - Stamp, small U = 145 mm 85 °, H = 200 mm, R = 5 mm
            - Quick change monometer 85 °, H = 200 mm, V = 63 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending bending machine horizontal FASTECH FP 20


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-7204 · bending machine horizontal

          FASTECH - FP 20 - - NEU -

          Technical details
          pressure 20 t︱stroke 185 mm︱table-size 480 x 1060 mm︱work speed 10,0 mm/sec︱return speed 10,0 mm/sec︱weight of the machine ca. 0,53 t︱total power requirement 2,2 kW︱dimensions of the machine ca. 1150 x 500 x 1200 mm︱
          - hydraulic horizontal bending machine - Solid work surface made of stabilized steel - Machine made of hardened and ground forged steel - Digital display for stroke adjustment - 1x tool kit - stepless adjustment of speed / pressing force - Double foot switch
            pressure 20 t
            stroke 185 mm
            table-size 480 x 1060 mm
            work speed 10,0 mm/sec
            return speed 10,0 mm/sec
            weight of the machine ca. 0,53 t
            total power requirement 2,2 kW
            dimensions of the machine ca. 1150 x 500 x 1200 mm
            Description :
            - hydraulic horizontal bending machine
            - Solid work surface made of stabilized steel
            - Machine made of hardened and ground forged steel
            - Digital display for stroke adjustment
            - 1x tool kit
            - stepless adjustment of speed / pressing force
            - Double foot switch


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending bending machine horizontal ZOPF T 400 Multiprogramm


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4040228 · bending machine horizontal

          ZOPF - T 400 Multiprogramm - - Neu -

          Technical details
          400 kN︱stroke length max. 285 mm︱working feed 9 mm/sec︱return speed 20 mm/sec︱ 660x1250 mm︱work height max. 930 mm︱toolpiece height max. 250 mm︱total power requirement 4 kW︱ 200x26 mm︱bending capacity max. - round 60x5,0 mm︱weight 1050 kg︱
          Domestic equipments: - semi-automatic NC control (99 programs with 16 steps each) - incl. bending bolt (without punch) - Incl. tool holder for dies - incl. foot pedal
            400 kN
            stroke length max. 285 mm
            working feed 9 mm/sec
            return speed 20 mm/sec
            660x1250 mm
            work height max. 930 mm
            toolpiece height max. 250 mm
            total power requirement 4 kW
            200x26 mm
            bending capacity max. - round 60x5,0 mm
            weight 1050 kg
            Description :
            Domestic equipments:
            - semi-automatic NC control (99 programs with 16 steps each)
            - incl. bending bolt (without punch)
            - Incl. tool holder for dies
            - incl. foot pedal


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending bending machine horizontal FASTECH FP 80


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-7355 · bending machine horizontal

          FASTECH - FP 80 - - NEU -

          Technical details
          pressure 80 t︱stroke 285 mm︱table-size 750 x 1425 mm︱work speed 10,0 mm/sec︱return speed 10,0 mm/sec︱weight of the machine ca. 1,7 t︱total power requirement 10,0 kW︱dimensions of the machine ca. 1,5 x 0,75 x 1,8 m︱
          - hydraulic horizontal bending machine - Solid work surface made of stabilized steel - Machine made of hardened and ground forged steel - Digital display for stroke adjustment - 1x tool kit - Double foot switch
            pressure 80 t
            stroke 285 mm
            table-size 750 x 1425 mm
            work speed 10,0 mm/sec
            return speed 10,0 mm/sec
            weight of the machine ca. 1,7 t
            total power requirement 10,0 kW
            dimensions of the machine ca. 1,5 x 0,75 x 1,8 m
            Description :
            - hydraulic horizontal bending machine
            - Solid work surface made of stabilized steel
            - Machine made of hardened and ground forged steel
            - Digital display for stroke adjustment
            - 1x tool kit
            - Double foot switch


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending bending machine horizontal Apollo P 320


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-5768 · bending machine horizontal

          Apollo - P 320 - - 2015 (NEUWERTIG) -

          Technical details
          pressure 32 t︱stroke 250 mm︱table-size 500 x 760 mm︱work height max. 925 mm︱bending speed max. 25 mm/sec︱tank capacity 80 l︱Pressure power 320 bar︱total power requirement 5,5 kW︱weight of the machine ca. 0,8 t︱dimensions of the machine ca. 1,3 x 0,5 x 1,3 m︱
          max.bending height: 200 mm Cutting capacity max. (St): 150 x 14 Punching capacity max. (St) Ø 35 Guide height: 200 mm
            pressure 32 t
            stroke 250 mm
            table-size 500 x 760 mm
            work height max. 925 mm
            bending speed max. 25 mm/sec
            tank capacity 80 l
            Pressure power 320 bar
            total power requirement 5,5 kW
            weight of the machine ca. 0,8 t
            dimensions of the machine ca. 1,3 x 0,5 x 1,3 m
            Description :
            max.bending height: 200 mm
            Cutting capacity max. (St): 150 x 14
            Punching capacity max. (St) Ø 35
            Guide height: 200 mm


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending bending machine horizontal ROWA T 280 H


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9386023 · bending machine horizontal

          ROWA - T 280 H - - 2003 -

          Technical details
          pressure 28.0 t︱stroke 0 - 250 mm︱flat steel 150 x 25 mm︱working feed 0.6 m/min︱return speed 1.2 m/min︱work height max. 800 mm︱table: 1150 x 600 mm︱total power requirement 3.0 kW︱oil volume 12.0 ltr.︱motor 400 Volt 50 Hz︱weight 560 kg︱range L-W-H 1150 x 600 x 900 mm︱
          Furnishing : - electro-hydraulic horizontal bending machine - including ROWA semi-automatic control unit: * Programming and storage of 90 different positions * Storage option for 8 bending programs * electr. Setting and digital display * Accuracy of +/- 0.02 mm - large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - ROWA bending tools - continuous adjustment of the bending speed and pressing force - 1x freely movable foot switch - Machine can be moved with a pallet truck/stacker * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9386023
            pressure 28.0 t
            stroke 0 - 250 mm
            flat steel 150 x 25 mm
            working feed 0.6 m/min
            return speed 1.2 m/min
            work height max. 800 mm
            table: 1150 x 600 mm
            total power requirement 3.0 kW
            oil volume 12.0 ltr.
            motor 400 Volt 50 Hz
            weight 560 kg
            range L-W-H 1150 x 600 x 900 mm
            Description :
            Furnishing :
            - electro-hydraulic horizontal bending machine
            - including ROWA semi-automatic control unit:
            * Programming and storage of 90 different positions
            * Storage option for 8 bending programs
            * electr. Setting and digital display
            * Accuracy of +/- 0.02 mm
            - large, robust machine table made of hardened steel
            - Machine made of hardened and ground forged steel
            - ROWA bending tools
            - continuous adjustment of the bending speed and pressing force
            - 1x freely movable foot switch
            - Machine can be moved with a pallet truck/stacker

            * Machine link:
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9386023


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending bending machine horizontal SCHÄFER 4-Walzen Rundbiegemaschine


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-H1018 · bending machine horizontal

          SCHÄFER - 4-Walzen Rundbiegemaschine - - 1987 -

          Technical details
          pressure / t︱stroke / mm︱table-size / mm︱weight of the machine ca. 65000 kg︱
          Make: Shepherd Type: SVRM 4-roller bending machine: Year of construction: 1986 Working width: 3000cm Smallest pipe diameter with 600 mm roller: Ø 720 mm Smallest tube diameter with 360 mm roller: Ø 460 mm Sheet thickness up to (depending on the material): 50 mm Material SA- 738 B Working width: 2500 mm Material SA- 738 B Material thickness: 35 mm conical bending: Except for the top roller, all rollers can be moved in an inclined position for conical bending. The roller positions can be read on display instruments. For semi-automatic or fully automatic operation of the machine, the bearing jewels of the rollers are equipped with scale bars and slide cams for limit switch actuation. This allows the rollers to return to the same set position over and over again, giving a very high level of uniformity in the shot wefts being bent.
            pressure / t
            stroke / mm
            table-size / mm
            weight of the machine ca. 65000 kg
            Description :
            Make: Shepherd
            Type: SVRM

            4-roller bending machine:

            Year of construction: 1986
            Working width: 3000cm
            Smallest pipe diameter with 600 mm roller: Ø 720 mm
            Smallest tube diameter with 360 mm roller: Ø 460 mm
            Sheet thickness up to (depending on the material): 50 mm
            Material SA- 738 B Working width: 2500 mm
            Material SA- 738 B Material thickness: 35 mm

            conical bending:
            Except for the top roller, all rollers can be moved in an inclined position for
            conical bending. The roller positions can be read on display instruments. For
            semi-automatic or fully automatic operation of the machine, the bearing jewels
            of the rollers are equipped with scale bars and slide cams for limit switch
            actuation. This allows the rollers to return to the same set position over and
            over again, giving a very high level of uniformity in the shot wefts being bent.


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending bending machine horizontal Winkelbieger WB 200


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8362007 · bending machine horizontal

          Winkelbieger - WB 200 - - -

          Technical details
          bending radius min. 190 mm︱square edge steel 20 x 20 mm︱flat steel 100 x 7 mm︱round bar steel 22,0 mm︱L-beam 100 x 10 mm︱weight of the machine ca. 34,0 kg.︱
          properties - For precise cold and hot bending of flat, round and square steels - Stable construction for screwing onto the workbench - Infinitely adjustable bending stop - With eccentric quick release for efficient work - Readable bending angle up to 120 ° - High repeat accuracy thanks to the bending angle stop - Ideal for repair shops and locksmiths scope of delivery - Bending plate sharp / round - Stepless angle stop - Terminal block with eccentric clamp - Material stop
            bending radius min. 190 mm
            square edge steel 20 x 20 mm
            flat steel 100 x 7 mm
            round bar steel 22,0 mm
            L-beam 100 x 10 mm
            weight of the machine ca. 34,0 kg.
            Description :
            properties
            - For precise cold and hot bending of flat, round and square steels
            - Stable construction for screwing onto the workbench
            - Infinitely adjustable bending stop
            - With eccentric quick release for efficient work
            - Readable bending angle up to 120 °
            - High repeat accuracy thanks to the bending angle stop
            - Ideal for repair shops and locksmiths

            scope of delivery
            - Bending plate sharp / round
            - Stepless angle stop
            - Terminal block with eccentric clamp
            - Material stop


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending bending machine horizontal A+B FASTECH FP 20


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8389012 · bending machine horizontal

          A+B FASTECH - FP 20 - - -

          Technical details
          pressure 20 t︱stroke 185 mm︱flat steel 200 x 12 mm︱working feed 10,0 mm/sec︱return speed 10,0 mm/min︱work height max. 930 mm︱table: 480 x 1060 mm︱total power requirement 2,2 kW︱motor 400 Volt 50 Hz︱oil volume 12,0 ltr.︱weight 530 kg︱range L-W-H 1150x480x1200 mm︱
          Furnishing : - electro-hydraulic horizontal bending machine - large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting * Programming of bend end point & retract point possible - 1x tool set (1x bending punch / 1x 1V die) - infinitely variable adjustment of the bending speed and pressing force - 1x manual material stop - Free-moving dual footswitch - Machine can be moved with a pallet truck/stacker - Operation manual
            pressure 20 t
            stroke 185 mm
            flat steel 200 x 12 mm
            working feed 10,0 mm/sec
            return speed 10,0 mm/min
            work height max. 930 mm
            table: 480 x 1060 mm
            total power requirement 2,2 kW
            motor 400 Volt 50 Hz
            oil volume 12,0 ltr.
            weight 530 kg
            range L-W-H 1150x480x1200 mm
            Description :
            Furnishing :
            - electro-hydraulic horizontal bending machine
            - large, robust machine table made of hardened steel
            - Machine made of hardened and ground forged steel
            - Digital display for stroke setting
            * Programming of bend end point & retract point possible
            - 1x tool set (1x bending punch / 1x 1V die)
            - infinitely variable adjustment of the bending speed and pressing force
            - 1x manual material stop
            - Free-moving dual footswitch
            - Machine can be moved with a pallet truck/stacker
            - Operation manual


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending bending machine horizontal A+B FASTECH FP 40


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8389013 · bending machine horizontal

          A+B FASTECH - FP 40 - - -

          Technical details
          pressure 40 t︱stroke 285 mm︱flat steel 250 x 24 mm︱working feed 10,0 mm/sec︱return speed 10,0 mm/min︱work height max. 930 mm︱table: 660 x 1250 mm︱total power requirement 4,0 kW︱motor 400 Volt 50 Hz︱weight 1450 kg︱range L-W-H 1450 x 650 x 1800 mm︱oil volume 40,0 l︱
          Furnishing : - electro-hydraulic horizontal bending machine - large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting * Programming of bend end point & retract point possible - 1x tool set (1x bending punch / 1x 1V die) - infinitely variable adjustment of the bending speed and pressing force - 1x manual material stop - Free-moving dual footswitch - Machine can be moved with a pallet truck/stacker - Operation manual
            pressure 40 t
            stroke 285 mm
            flat steel 250 x 24 mm
            working feed 10,0 mm/sec
            return speed 10,0 mm/min
            work height max. 930 mm
            table: 660 x 1250 mm
            total power requirement 4,0 kW
            motor 400 Volt 50 Hz
            weight 1450 kg
            range L-W-H 1450 x 650 x 1800 mm
            oil volume 40,0 l
            Description :
            Furnishing :
            - electro-hydraulic horizontal bending machine
            - large, robust machine table made of hardened steel
            - Machine made of hardened and ground forged steel
            - Digital display for stroke setting
            * Programming of bend end point & retract point possible
            - 1x tool set (1x bending punch / 1x 1V die)
            - infinitely variable adjustment of the bending speed and pressing force
            - 1x manual material stop
            - Free-moving dual footswitch
            - Machine can be moved with a pallet truck/stacker
            - Operation manual


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending bending machine horizontal BERNARDO WB 100


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8361096 · bending machine horizontal

          BERNARDO - WB 100 - - -

          Technical details
          square edge steel 16 x 16 mm︱flat steel 100 x 5 mm︱L-beam 60 x 8 mm︱bending radius min. 190 mm︱round bar steel 18,0 mm︱weight of the machine ca. 33,0 kg.︱
          Characteristics : - For precise cold and hot bending of flat, round and square steel - Stable design for screwing on the workbench - Infinitely adjustable bending stop with locking pin - With eccentric quick clamping for efficient work - Readable bending angle up to 120° - High repetition accuracy thanks to the bending angle stop - Ideal for repair shops and locksmiths Scope of delivery: - Bending plate sharp / round - Radius bending plate R 20 / R 25 - offset block - Bending plate for round bar - offset plate - Radius bending plate R 10 / R 15 - angle stop - Clamping block with eccentric clamp - Material stop
            square edge steel 16 x 16 mm
            flat steel 100 x 5 mm
            L-beam 60 x 8 mm
            bending radius min. 190 mm
            round bar steel 18,0 mm
            weight of the machine ca. 33,0 kg.
            Description :
            Characteristics :
            - For precise cold and hot bending of flat, round and square steel
            - Stable design for screwing on the workbench
            - Infinitely adjustable bending stop with locking pin
            - With eccentric quick clamping for efficient work
            - Readable bending angle up to 120°
            - High repetition accuracy thanks to the bending angle stop
            - Ideal for repair shops and locksmiths

            Scope of delivery:
            - Bending plate sharp / round
            - Radius bending plate R 20 / R 25
            - offset block
            - Bending plate for round bar
            - offset plate
            - Radius bending plate R 10 / R 15
            - angle stop
            - Clamping block with eccentric clamp
            - Material stop


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending bending machine horizontal A+B FASTECH FP 80


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8389014 · bending machine horizontal

          A+B FASTECH - FP 80 - - -

          Technical details
          pressure 80 t︱stroke 285 mm︱flat steel 300 x 25 mm︱working feed 10,0 mm/sec︱return speed 10,0 mm/min︱work height max. 930 mm︱table: 750 x 1425 mm︱total power requirement 10,0 kW︱motor 400 Volt 50 Hz︱weight 1700 kg︱range L-W-H 1500 x 750 x 1800 mm︱oil volume 120 l︱
          Furnishing : - electro-hydraulic horizontal bending machine - large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting * Programming of bend end point & retract point possible - 1x tool set (1x bending punch / 1x 1V die) - infinitely variable adjustment of the bending speed and pressing force - 1x manual material stop - Free-moving dual footswitch - Machine can be moved with a pallet truck/stacker - Operation manual
            pressure 80 t
            stroke 285 mm
            flat steel 300 x 25 mm
            working feed 10,0 mm/sec
            return speed 10,0 mm/min
            work height max. 930 mm
            table: 750 x 1425 mm
            total power requirement 10,0 kW
            motor 400 Volt 50 Hz
            weight 1700 kg
            range L-W-H 1500 x 750 x 1800 mm
            oil volume 120 l
            Description :
            Furnishing :
            - electro-hydraulic horizontal bending machine
            - large, robust machine table made of hardened steel
            - Machine made of hardened and ground forged steel
            - Digital display for stroke setting
            * Programming of bend end point & retract point possible
            - 1x tool set (1x bending punch / 1x 1V die)
            - infinitely variable adjustment of the bending speed and pressing force
            - 1x manual material stop
            - Free-moving dual footswitch
            - Machine can be moved with a pallet truck/stacker
            - Operation manual


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending bending machine horizontal Van de Graaf BHHS 70


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-BG155 · bending machine horizontal

          Van de Graaf - BHHS 70 - - -

          Technical details
          pressure 70T t︱stroke 300 mm︱table-size - mm︱
          Capacity: 70 T Horizontal Stroke cylinder: 300 mm Machine weight: 1.700 kg
            pressure 70T t
            stroke 300 mm
            table-size - mm
            Description :
            Capacity: 70 T
            Horizontal
            Stroke cylinder: 300 mm
            Machine weight: 1.700 kg


        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending bending machine horizontal NN


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-PE235A · bending machine horizontal

          NN - - - -

          Technical details
          Capacity 30 T︱Stroke 350 mm︱Machine dimensions (lxwxh) - mm︱
          Lying press With electric conveyor With pneumatic clamp Machine can be converted into strip bending machine Height: 390 mm Open: 700 mm Closed: 350 mm Stroke cylinder: 350 mm
            Capacity 30 T
            Stroke 350 mm
            Machine dimensions (lxwxh) - mm
            Description :
            Lying press
            With electric conveyor
            With pneumatic clamp
            Machine can be converted into strip bending machine
            Height: 390 mm
            Open: 700 mm
            Closed: 350 mm
            Stroke cylinder: 350 mm


        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact

          Notching Machine

          used Sheet metal working / shaeres / bending Notching Machine UNBEKANNT A 5


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-06464 · Notching Machine

          UNBEKANNT - A 5 - - Unbekannt -

          Technical details
          plate thickness 4 mm︱ Dreieck ausklinker ︱pressure . t︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            plate thickness 4 mm
            Dreieck ausklinker
            pressure . t


        • Christoph Busch GmbH
        • Dieselstr. 22
        • 41352 Korschenbroich
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Notching Machine METALLKRAFT AKM 200-6 VP


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2390001 · Notching Machine

          METALLKRAFT - AKM 200-6 VP - - NEU -

          Technical details
          plate thickness 6 mm︱pressure 12 t︱cutting range Breite x Länge 200 mm︱no. of strokes 15 Hub/min︱cutting angle 30 - 140 °︱total power requirement 4 kW︱weight of the machine ca. 1,02 t︱dimensions of the machine ca. 1065 x 900 x 1210 mm︱
            plate thickness 6 mm
            pressure 12 t
            cutting range Breite x Länge 200 mm
            no. of strokes 15 Hub/min
            cutting angle 30 - 140 °
            total power requirement 4 kW
            weight of the machine ca. 1,02 t
            dimensions of the machine ca. 1065 x 900 x 1210 mm


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Notching Machine SIMASV AF 226


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-45 · Notching Machine

          SIMASV - AF 226 - - 2021 -

          Technical details
          gebraucht20219589prompt, Zwischenverkauf vItalien7200 €︱ 11220 mm︱ 6 mm︱ 4.5 mm︱ 45 1/min︱ 90 °︱ 3 kW︱ 700 mm︱ 750 mm︱ 1100 mm︱ 540 kg︱
          DEMO MACHINE hydraulic drive automatic adjustment of the blade gap 1 set of blades for mild steel 2 gauges angle adjustable protection cover, acrylic glas foot pedal waste chute load hook machine feet according to CErules
            gebraucht
            2021
            9589
            prompt, Zwischenverkauf v
            Italien
            7200 €
            1
            1
            220 mm
            6 mm
            4.5 mm
            45 1/min
            90 °
            3 kW
            700 mm
            750 mm
            1100 mm
            540 kg
            Description :
            DEMO MACHINE
            hydraulic drive
            automatic adjustment of the blade gap
            1 set of blades for mild steel
            2 gauges angle adjustable
            protection cover, acrylic glas
            foot pedal
            waste chute
            load hook
            machine feet
            according to CErules


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Notching Machine BERNARDO MRA-Pro


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8390110 · Notching Machine

          BERNARDO - MRA-Pro - - 2020 -

          Technical details
          plate thickness 3,0 mm︱tube diameter 60,0 mm︱motor 230 Volt︱total power requirement 1,1 kW︱
            plate thickness 3,0 mm
            tube diameter 60,0 mm
            motor 230 Volt
            total power requirement 1,1 kW


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Notching Machine HUVEMA BL-3


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-S353 · Notching Machine

          HUVEMA - BL-3 - - 2020 -

          Technical details
          Knife length 125 x 125 mm︱Plate thickness 1,5 mm︱Machine weight 29 kg︱capacity in tons - max. 3 t︱
          Brand Huvema Type BL-3 Year of make 2020 Machine weight 29 kg Capacity 3 T Blade length 125 x 125 mm Plate thickness 1,5 mm
            Knife length 125 x 125 mm
            Plate thickness 1,5 mm
            Machine weight 29 kg
            capacity in tons - max. 3 t
            Description :
            Brand Huvema
            Type BL-3
            Year of make 2020
            Machine weight 29 kg
            Capacity 3 T
            Blade length 125 x 125 mm
            Plate thickness 1,5 mm



        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Notching Machine MEULEMAN KC10


          • Valk Machines BV
          • Kadijk 6
          • 8531XD Lemmer
          • Niederlande

          • +31 514562904
          • sales@valkmachines.com
            www.valkmachines.com
          #2079-35 · Notching Machine

          MEULEMAN - KC10 - - 2018 -

          Technical details
          ︱total power requirement kW︱weight of the machine ca. t︱required space m︱
          Capacity: Ø41,9 x 2,7 R21 x 8 mm Featured with: - Footpedal - User manual (NL) Airpresse machine
            Description :
            Capacity:
            Ø41,9 x 2,7
            R21 x 8 mm

            Featured with:
            - Footpedal
            - User manual (NL)

            Airpresse machine


        • Valk Machines BV
        • Kadijk 6
        • 8531XD Lemmer
        • Niederlande

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          •   
          •