European network of stockholding machinery dealers

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:

          Hand-Lever Shear

          Machinelist: Hand-Lever Shear


          Hand-Lever Shear

          used Sheet metal working / shaeres / bending Hand-Lever Shear MUHR & BENDER 3S/6R


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-7374 · Hand-Lever Shear

          MUHR & BENDER - 3S/6R - - Unbekannt -

          Technical details
          sheet width - max. 200 mm︱plate thickness 6 mm︱flat steel 70 x 7 mm︱round bar steel 13 mm︱weight of the machine ca. 50 kg︱dimensions of the machine ca. 800 x 500 x 1800 mm︱
            sheet width - max. 200 mm
            plate thickness 6 mm
            flat steel 70 x 7 mm
            round bar steel 13 mm
            weight of the machine ca. 50 kg
            dimensions of the machine ca. 800 x 500 x 1800 mm


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hand-Lever Shear PEDDINGHAUS 4 RP 8


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-26642 · Hand-Lever Shear

          PEDDINGHAUS - 4 RP 8 - - 1984 -

          Technical details
          sheet width - max. 40 mm︱plate thickness 8 mm︱L-beam 40 x 6 mm︱weight of the machine ca. 0,08 t︱dimensions of the machine ca. 1 x 1 x 1,5 m︱
            sheet width - max. 40 mm
            plate thickness 8 mm
            L-beam 40 x 6 mm
            weight of the machine ca. 0,08 t
            dimensions of the machine ca. 1 x 1 x 1,5 m


        • Karl Günter Wirths GmbH
        • Scharpenberger Strasse 96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hand-Lever Shear MUBEA 2/8/300


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-10854 · Hand-Lever Shear

          MUBEA - 2/8/300 - - -

          Technical details
          sheet width - max. 300 mm︱plate thickness 8 mm︱flat steel 80 x 10 mm︱blade length 300 mm︱machine length 860 mm︱machine height 565 mm︱weight of the machine ca. 172 kg︱
          Long measuring shear Machine dealer with own stock of 1600 m².
            sheet width - max. 300 mm
            plate thickness 8 mm
            flat steel 80 x 10 mm
            blade length 300 mm
            machine length 860 mm
            machine height 565 mm
            weight of the machine ca. 172 kg
            Description :
            Long measuring shear
            Machine dealer with own stock of 1600 m².


        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hand-Lever Shear Fabr. UNBEKANNT/NOT KNOWN -


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-11101 · Hand-Lever Shear

          Fabr. UNBEKANNT/NOT KNOWN - - - - -

          Technical details
          sheet width - max. 170 mm︱plate thickness 3,4 mm︱angle steel/side length 50 mm︱weight of the machine ca. 70 kg︱dimensions of the machine ca. 0,7 x 0,16 x 2,1 m︱
          Is cutting flat steel, L-beam, Scorper, round and square material. Machine dealer with own stock of 1600 m².
            sheet width - max. 170 mm
            plate thickness 3,4 mm
            angle steel/side length 50 mm
            weight of the machine ca. 70 kg
            dimensions of the machine ca. 0,7 x 0,16 x 2,1 m
            Description :
            Is cutting flat steel, L-beam, Scorper, round and square material.
            Machine dealer with own stock of 1600 m².


        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hand-Lever Shear BLEMAS KGM1020 (Demo)


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-11963 · Hand-Lever Shear

          BLEMAS - KGM1020 (Demo) - - -

          Technical details
          sheet width - max. 1020 mm︱plate thickness 1,5 mm︱cutting length 1020 mm︱weight ca. 300 kg︱dimensions of the machine ca. 1,3 x 0,8 m︱Side stop 600 mm︱Material place of deposit ausziehbar
          Hand lever shears with counterweight, length stop, blank holder with Quick clamping, mm scale on the table, pull-out sheet metal support. Demonstration machine at a special price. Machine dealer with own stock of 1600 m².
            sheet width - max. 1020 mm
            plate thickness 1,5 mm
            cutting length 1020 mm
            weight ca. 300 kg
            dimensions of the machine ca. 1,3 x 0,8 m
            Side stop 600 mm
            Material place of deposit ausziehbar
            Description :
            Hand lever shears with counterweight, length stop, blank holder with
            Quick clamping, mm scale on the table, pull-out sheet metal support.
            Demonstration machine at a special price.
            Machine dealer with own stock of 1600 m².


        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hand-Lever Shear MUBEA 5 SN / 8 R


          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland

          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-20101 · Hand-Lever Shear

          MUBEA - 5 SN / 8 R - - -

          Technical details
          sheet width - max. 80 x 12 mm︱plate thickness 8,0 mm︱weight of the machine ca. 135 Kg︱dimensions of the machine ca. 1,20 x 0,50 x 1,75 m︱
          - Serial-no.: 305-11.06 - fixed on rolls
            sheet width - max. 80 x 12 mm
            plate thickness 8,0 mm
            weight of the machine ca. 135 Kg
            dimensions of the machine ca. 1,20 x 0,50 x 1,75 m
            Description :
            - Serial-no.: 305-11.06
            - fixed on rolls


        • Kirchgeorg Werkzeugmaschinen
        • Frankfurter Straße 141
        • 63303 Dreieich-Sprendlingen
        • Deutschland

        • Datasheet
          Request / Contact

          Plate Shear - Hydraulic

          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic SAFAN UNBEKANNT


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-H1149 · Plate Shear - Hydraulic

          SAFAN - UNBEKANNT - - unbekannt -

          Technical details
          sheet width 3000 mm︱plate thickness 6 mm︱distance between columns / mm︱
            sheet width 3000 mm
            plate thickness 6 mm
            distance between columns / mm


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic ERMAK CNC HGS 3100x6 HH MONO


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4010991 · Plate Shear - Hydraulic

          ERMAK - CNC HGS 3100x6 HH MONO - - Neu - CYBELEC CybTouch

          Technical details
          sheet width 3100 mm︱plate thickness 6 mm︱voltage 380 V︱control CYBELEC CybTouch ︱down holder 14 Stück︱cutting angle 1,2 °︱total power requirement 11 kW︱weight of the machine ca. 6.300 kg︱dimensions of the machine ca. 4000x2100x1640 mm︱
          Equipment: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Quantity * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. can be folded up at max. Traverse path, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine u. Control in German Special equipment: - pneumatic sheet holding device (monoblock)
            sheet width 3100 mm
            plate thickness 6 mm
            voltage 380 V
            control CYBELEC CybTouch
            down holder 14 Stück
            cutting angle 1,2 °
            total power requirement 11 kW
            weight of the machine ca. 6.300 kg
            dimensions of the machine ca. 4000x2100x1640 mm
            Description :
            Equipment:
            - CNC electr. / hydraulic swing cut shears
            - CYBELEC CNC touch screen controller, model CybTouch 8
            * Backgauge preselection - X axis
            * Cutting gap adjustment
            * Quantity
            * Cutting length limitation
            * Material preselection, including sheet thickness
            * Cutting line lighting
            - motorized backgauge, travel = 1,000 mm (X axis)
            * on ball screws
            * autom. can be folded up at max. Traverse path, for longer cuts
            - 1x side stop
            - 2x front support arms
            - Ball casters in the front support table
            - hinged finger protection, with safety switch
            - BOSCH / HOERBIGER hydraulic system
            - SIEMENS electrical system
            - light barrier behind the machine (safety device)
            - foot switch
            - CE mark / declaration of conformity
            - User manual: machine u. Control in German

            Special equipment:
            - pneumatic sheet holding device (monoblock)


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic FARINA CFM 2100 x 4,0


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011176 · Plate Shear - Hydraulic

          FARINA - CFM 2100 x 4,0 - - NEU -

          Technical details
          sheet width 2040 mm︱ 4 mm︱sheet thickness for stainless steel 2 mm︱total power requirement 7,5 kW︱rear stop 750 mm︱weight of the machine ca. 2600 kg︱dimensions 2810 x 2230 x 1360 mm︱
            sheet width 2040 mm
            4 mm
            sheet thickness for stainless st. 2 mm
            total power requirement 7,5 kW
            rear stop 750 mm
            weight of the machine ca. 2600 kg
            dimensions 2810 x 2230 x 1360 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic ERMAK CNC HGD 3100x10 HH MONO


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011046 · Plate Shear - Hydraulic

          ERMAK - CNC HGD 3100x10 HH MONO - - Neu -

          Technical details
          sheet width 3100 mm︱plate thickness 10 mm︱cutting angle 2 °︱down holder 14 Stück︱no. of strokes 13 Hub/min︱throat 350 mm︱oil volume 260 l︱total power requirement 22 kW︱weight of the machine ca. 10.550 kg︱dimensions of the machine ca. 4000x2250x2050 mm︱
          Domestic equipments: - Hydraulic swing cut sheet metal shears - Touch screen controller with digital display for backgauge - automatic kerf adjustment via the control - Backgauge control 1000 mm travel with recirculating ball screws - Vibration cutting machine with kerf adjustment - 2 support arms - 1 side stop - Photocell behind the machine - Cutting length limit - cut line lighting - Chrome steel knife - Ball rolls in the table - hinged finger guard with limit switch - Footswitch - CE mark / Declaration of Conformity - Bed instructions in German
            sheet width 3100 mm
            plate thickness 10 mm
            cutting angle 2 °
            down holder 14 Stück
            no. of strokes 13 Hub/min
            throat 350 mm
            oil volume 260 l
            total power requirement 22 kW
            weight of the machine ca. 10.550 kg
            dimensions of the machine ca. 4000x2250x2050 mm
            Description :
            Domestic equipments:
            - Hydraulic swing cut sheet metal shears
            - Touch screen controller with digital display for backgauge
            - automatic kerf adjustment via the control
            - Backgauge control 1000 mm travel with recirculating ball screws
            - Vibration cutting machine with kerf adjustment
            - 2 support arms
            - 1 side stop
            - Photocell behind the machine
            - Cutting length limit
            - cut line lighting
            - Chrome steel knife
            - Ball rolls in the table
            - hinged finger guard with limit switch
            - Footswitch
            - CE mark / Declaration of Conformity
            - Bed instructions in German


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic FARINA HTBS BASIC


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011089 · Plate Shear - Hydraulic

          FARINA - HTBS BASIC - - NEU -

          Technical details
          sheet width 3060 mm︱plate thickness 10 mm︱back stop - adjustable 1000 mm︱cutting angle 1,5 °︱weight of the machine ca. 10500 kg︱
            sheet width 3060 mm
            plate thickness 10 mm
            back stop - adjustable 1000 mm
            cutting angle 1,5 °
            weight of the machine ca. 10500 kg


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic ERMAK CNC HGD 3100x13


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4010788 · Plate Shear - Hydraulic

          ERMAK - CNC HGD 3100x13 - - Neu - CYBELEC CybTouch

          Technical details
          sheet width 3100 mm︱plate thickness 13 mm︱thickness at "Niro-steel" 8 mm︱control CYBELEC CybTouch ︱down holder 14 Stück︱cutting angle 2,0° °︱total power requirement 22 kW︱voltage 380 V︱no. of strokes 11 Hub/min︱weight of the machine ca. 12.100 kg︱dimensions of the machine ca. 4000x2240x2235 mm︱
          Accessories / equipment: - CYBELEC-CybTouch control panel with digital display for backgauge - hydr. Cutting gap adjustment via control - 1 side stop - 4 front lifting arms - cut line lighting - Cutting gap adjustment - Cutting length limit - Ball rolls in the table - motorized back gauge 1.000 mm travel with recirculating ball screws,    automatically start at the end of the stop - Shear knives for stainless steel cuts as standard - Photocell behind the machine - SIEMENS electrical system - BOSCH / HOERBIGER hydraulic system - Footswitch - Operating instructions in German
            sheet width 3100 mm
            plate thickness 13 mm
            thickness at "Niro-steel" 8 mm
            control CYBELEC CybTouch
            down holder 14 Stück
            cutting angle 2,0° °
            total power requirement 22 kW
            voltage 380 V
            no. of strokes 11 Hub/min
            weight of the machine ca. 12.100 kg
            dimensions of the machine ca. 4000x2240x2235 mm
            Description :
            Accessories / equipment:
            - CYBELEC-CybTouch control panel with digital display for backgauge
            - hydr. Cutting gap adjustment via control
            - 1 side stop
            - 4 front lifting arms
            - cut line lighting
            - Cutting gap adjustment
            - Cutting length limit
            - Ball rolls in the table
            - motorized back gauge 1.000 mm travel with recirculating ball screws,
               automatically start at the end of the stop
            - Shear knives for stainless steel cuts as standard
            - Photocell behind the machine
            - SIEMENS electrical system
            - BOSCH / HOERBIGER hydraulic system
            - Footswitch
            - Operating instructions in German


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic BAYKAL HGL 3106


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011153 · Plate Shear - Hydraulic

          BAYKAL - HGL 3106 - - NEU -

          Technical details
          sheet width 3060 mm︱plate thickness 6 mm︱sheet thickness for stainless steel 4 mm︱System pressure 200 kg/cm2︱down holder 17 Stück︱engine output 11 kW︱machine weight ab. 5460 kg︱dimensions 3930 x 2750 x 1570 mm︱
            sheet width 3060 mm
            plate thickness 6 mm
            sheet thickness for stainless st. 4 mm
            System pressure 200 kg/cm2
            down holder 17 Stück
            engine output 11 kW
            machine weight ab. 5460 kg
            dimensions 3930 x 2750 x 1570 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic BAYKAL HGL 3108


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011152 · Plate Shear - Hydraulic

          BAYKAL - HGL 3108 - - NEU -

          Technical details
          sheet width 3060 mm︱plate thickness 8 mm︱sheet thickness for stainless steel 5 mm︱System pressure 200 kg/cm2︱down holder 17 Stück︱engine output 15 kW︱machine weight ab. 6380 kg︱dimensions 3930 x 2890 x 1600 mm︱
            sheet width 3060 mm
            plate thickness 8 mm
            sheet thickness for stainless st. 5 mm
            System pressure 200 kg/cm2
            down holder 17 Stück
            engine output 15 kW
            machine weight ab. 6380 kg
            dimensions 3930 x 2890 x 1600 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic ERMAK CNC HGS 3100x6


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4010594 · Plate Shear - Hydraulic

          ERMAK - CNC HGS 3100x6 - - Neu - CYBELEC CybTouch

          Technical details
          sheet width 3100 mm︱plate thickness 6 mm︱voltage 380 V︱control CYBELEC CybTouch ︱down holder 14 Stück︱cutting angle 1,2 °︱ 20 ︱total power requirement 11 kW︱weight of the machine ca. 5700 kg︱dimensions of the machine ca. 4000x2100x1640 mm︱
          Accessories / equipment: - CYBELEC Cybtouch touch screen controller - NC controller for backgauge, gap adjustment, number of pieces, cutting length - 1 side stop with scale, T-groove and tilting cam - 2 front support arms - cut line lighting - Cutting gap adjustment - Cutting length limit - Folding finger guard with limit switch - motorized back gauge 1.000 mm travel - Ball screws - Photocell behind the machine - Ball rolls in the table - SIEMENS electrical system - BOSCH / HOERBIGER hydraulic system - Footswitch - CE mark / Declaration of Conformity - Operating manual: Machine and control in German
            sheet width 3100 mm
            plate thickness 6 mm
            voltage 380 V
            control CYBELEC CybTouch
            down holder 14 Stück
            cutting angle 1,2 °
            20
            total power requirement 11 kW
            weight of the machine ca. 5700 kg
            dimensions of the machine ca. 4000x2100x1640 mm
            Description :
            Accessories / equipment:
            - CYBELEC Cybtouch touch screen controller
            - NC controller for backgauge, gap adjustment, number of pieces,
            cutting length
            - 1 side stop with scale, T-groove and tilting cam
            - 2 front support arms
            - cut line lighting
            - Cutting gap adjustment
            - Cutting length limit
            - Folding finger guard with limit switch
            - motorized back gauge 1.000 mm travel
            - Ball screws
            - Photocell behind the machine
            - Ball rolls in the table
            - SIEMENS electrical system
            - BOSCH / HOERBIGER hydraulic system
            - Footswitch
            - CE mark / Declaration of Conformity
            - Operating manual: Machine and control in German


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic FARINA CFM 1360 x 3,0


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011175 · Plate Shear - Hydraulic

          FARINA - CFM 1360 x 3,0 - - NEU -

          Technical details
          sheet width 1350 mm︱ 3 mm︱sheet thickness for stainless steel 1,5 mm︱rear stop 600 mm︱total power requirement 3 kW︱weight of the machine ca. 1150 kg︱dimensions 2030 x 1940 x 1220 mm︱
            sheet width 1350 mm
            3 mm
            sheet thickness for stainless st. 1,5 mm
            rear stop 600 mm
            total power requirement 3 kW
            weight of the machine ca. 1150 kg
            dimensions 2030 x 1940 x 1220 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic FARINA BTS 3006


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011177 · Plate Shear - Hydraulic

          FARINA - BTS 3006 - - NEU -

          Technical details
          sheet width 3050 mm︱plate thickness 6 mm︱back stop - adjustable 1000 mm︱cutting angle 1,5 °︱0 17 St.︱total power requirement 11 kW︱quantity of oil 180 l︱weight of the machine ca. 5950 kg︱
            sheet width 3050 mm
            plate thickness 6 mm
            back stop - adjustable 1000 mm
            cutting angle 1,5 °
            0 17 St.
            total power requirement 11 kW
            quantity of oil 180 l
            weight of the machine ca. 5950 kg


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic ERMAK CNC HGD 3100x10


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4010523 · Plate Shear - Hydraulic

          ERMAK - CNC HGD 3100x10 - - Neu - CYBELEC CybTouch 8

          Technical details
          sheet width 3100 mm︱plate thickness 10 mm︱cutting angle 2 °︱down holder 14 Stück︱no. of strokes 13 Hub/min︱throat 350 mm︱oil volume 260 l︱control CYBELEC CybTouch 8 ︱total power requirement 22 kW︱weight of the machine ca. 10.550 kg︱dimensions of the machine ca. 4000x2250x2050 mm︱
          Domestic equipments: - Hydraulic swing cut sheet metal shears - Touch screen controller with digital display for backgauge - automatic kerf adjustment via the control - Backgauge control 1000 mm travel with recirculating ball screws - Vibration cutting machine with kerf adjustment - 2 support arms - 1 side stop - Photocell behind the machine - Cutting length limit - cut line lighting - Chrome steel knife - Ball rolls in the table - hinged finger guard with limit switch - Footswitch - CE mark / Declaration of Conformity - Bed instructions in German
            sheet width 3100 mm
            plate thickness 10 mm
            cutting angle 2 °
            down holder 14 Stück
            no. of strokes 13 Hub/min
            throat 350 mm
            oil volume 260 l
            control CYBELEC CybTouch 8
            total power requirement 22 kW
            weight of the machine ca. 10.550 kg
            dimensions of the machine ca. 4000x2250x2050 mm
            Description :
            Domestic equipments:
            - Hydraulic swing cut sheet metal shears
            - Touch screen controller with digital display for backgauge
            - automatic kerf adjustment via the control
            - Backgauge control 1000 mm travel with recirculating ball screws
            - Vibration cutting machine with kerf adjustment
            - 2 support arms
            - 1 side stop
            - Photocell behind the machine
            - Cutting length limit
            - cut line lighting
            - Chrome steel knife
            - Ball rolls in the table
            - hinged finger guard with limit switch
            - Footswitch
            - CE mark / Declaration of Conformity
            - Bed instructions in German


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic BAYKAL HGL 2606


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011154 · Plate Shear - Hydraulic

          BAYKAL - HGL 2606 - - NEU -

          Technical details
          sheet width 2560 mm︱plate thickness 6 mm︱sheet thickness for stainless steel 4 mm︱System pressure 200 kg/cm2︱down holder 15 Stück︱engine output 11 kW︱machine weight ab. 4670 kg︱dimensions 3350 x 2800 x 1550 mm︱
            sheet width 2560 mm
            plate thickness 6 mm
            sheet thickness for stainless st. 4 mm
            System pressure 200 kg/cm2
            down holder 15 Stück
            engine output 11 kW
            machine weight ab. 4670 kg
            dimensions 3350 x 2800 x 1550 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic BAYKAL HGL 2106


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011155 · Plate Shear - Hydraulic

          BAYKAL - HGL 2106 - - NEU -

          Technical details
          sheet width 2060 mm︱plate thickness 6 mm︱sheet thickness for stainless steel 4 mm︱System pressure 200 kg/cm2︱down holder 13 Stück︱engine output 11 kW︱machine weight ab. 3850 kg︱dimensions 2850 x 2800 x 1550 mm︱
            sheet width 2060 mm
            plate thickness 6 mm
            sheet thickness for stainless st. 4 mm
            System pressure 200 kg/cm2
            down holder 13 Stück
            engine output 11 kW
            machine weight ab. 3850 kg
            dimensions 2850 x 2800 x 1550 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic BAYKAL HGL 4106


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011156 · Plate Shear - Hydraulic

          BAYKAL - HGL 4106 - - NEU -

          Technical details
          sheet width 4060 mm︱plate thickness 6 mm︱System pressure 200 kg/cm2︱down holder 23 Stück︱engine output 11 kW︱machine weight ab. 9400 kg︱dimensions 4940 x 2750 x 1560 mm︱
            sheet width 4060 mm
            plate thickness 6 mm
            System pressure 200 kg/cm2
            down holder 23 Stück
            engine output 11 kW
            machine weight ab. 9400 kg
            dimensions 4940 x 2750 x 1560 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic FARINA CFMT 2560 x 4,0


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011174 · Plate Shear - Hydraulic

          FARINA - CFMT 2560 x 4,0 - - NEU -

          Technical details
          sheet width 2550 mm︱ 4 mm︱sheet thickness for stainless steel 2 mm︱rear stop 750 mm︱total power requirement 7,5 kW︱weight of the machine ca. 3050 kg︱dimensions 3300 x 2230 x 1360 mm︱
            sheet width 2550 mm
            4 mm
            sheet thickness for stainless st. 2 mm
            rear stop 750 mm
            total power requirement 7,5 kW
            weight of the machine ca. 3050 kg
            dimensions 3300 x 2230 x 1360 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic BAYKAL MGH 4110


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011184 · Plate Shear - Hydraulic

          BAYKAL - MGH 4110 - - NEU -

          Technical details
          sheet width 4100 mm︱plate thickness 10 mm︱cutting angle 2 °︱ 10 ︱rear stop 5 - 1000 mm︱hydr. holding down 23 ︱oil volume 170 l︱total power requirement 22 kW︱machine weight ab. 13.000 kg︱dimensions 4900 x 2800 x 1900 mm︱
            sheet width 4100 mm
            plate thickness 10 mm
            cutting angle 2 °
            10
            rear stop 5 - 1000 mm
            hydr. holding down 23
            oil volume 170 l
            total power requirement 22 kW
            machine weight ab. 13.000 kg
            dimensions 4900 x 2800 x 1900 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic RAS 85.30


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-94147 · Plate Shear - Hydraulic

          RAS - 85.30 - - ca. 1988 -

          Technical details
          sheet width 3100 mm︱plate thickness 4,00 mm︱distance between columns mm︱total power requirement 7,50 kW︱weight of the machine ca. 4,20 t︱dimensions of the machine ca. m︱
          - CNC controlled back gauge 10 – 1000mm - central cutting gap adjustment - Pneumatic sheet metal support - Angle stop 2500 mm - 3 support arms
            sheet width 3100 mm
            plate thickness 4,00 mm
            total power requirement 7,50 kW
            weight of the machine ca. 4,20 t
            Description :
            - CNC controlled back gauge 10 – 1000mm
            - central cutting gap adjustment
            - Pneumatic sheet metal support
            - Angle stop 2500 mm
            - 3 support arms


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •