European network of stockholding machinery dealers

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:

          Flanging and Seam Rolling Machine

          Machinelist: Flanging and Seam Rolling Machine


          Flanging and Seam Rolling Machine

          used Sheet metal working / shaeres / bending Flanging and Seam Rolling Machine BENDMAK SW 125 man.


          • SKM Industriemaschinen
          • Röntgenstr. 3
          • 89264 Weißenhorn
          • Deutschland

          • +49 (0) 7309 954 986 0
            +49 (0) 7309 954 986 1
          • info@skm-maschinen.de
            www.skm-maschinen.de
          #2032-1044 · Flanging and Seam Rolling Machine

          BENDMAK - SW 125 man. - - 2018 -

          Technical details
          plate thickness 1,25 mm︱Shank diameter 26 mm︱weight of the machine ca. 50 kg︱
          Sheet thickness: 1.25 mm Roller shaft color: 62 mm Roller center distance: 250 mm Shaft-Ø: 26 Throat Depth: 260 mm Dimensions of the Machine: Length: 600 mm Height: 550 mm Width: 350 mm Weight: about 50 kg incl. standard rolls
            plate thickness 1,25 mm
            Shank diameter 26 mm
            weight of the machine ca. 50 kg
            Description :
            Sheet thickness: 1.25 mm
            Roller shaft color: 62 mm
            Roller center distance: 250 mm
            Shaft-Ø: 26
            Throat Depth: 260 mm

            Dimensions of the Machine:
            Length: 600 mm
            Height: 550 mm
            Width: 350 mm

            Weight: about 50 kg

            incl. standard rolls


        • SKM Industriemaschinen
        • Röntgenstr. 3
        • 89264 Weißenhorn
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Flanging and Seam Rolling Machine SAHINLER IK 0,8 man.


          • SKM Industriemaschinen
          • Röntgenstr. 3
          • 89264 Weißenhorn
          • Deutschland

          • +49 (0) 7309 954 986 0
            +49 (0) 7309 954 986 1
          • info@skm-maschinen.de
            www.skm-maschinen.de
          #2032-1041 · Flanging and Seam Rolling Machine

          SAHINLER - IK 0,8 man. - - 2017 -

          Technical details
          plate thickness 0,8 mm︱0 52 mm︱weight of the machine ca. 30 kg︱
          Producer: Sahinler Type: IK 0,8 YOM: new Shaft Length: 110 mm Bordering Capacity: 0,8 mm Roll-Ø: 52 mm Throat Depth: 80 mm Dimensions of the Machine (LxWxH): 380 x 180 x 380 mm Weight: 30 kg Additional information: • Cast iron heavy duty main frame • Forward-backward adjustable sheet support • Easy to carry for workshops • Forward-backward adjustable bottom shaft • Rolls shafts are special steel material • 7 set of rolls standard
            plate thickness 0,8 mm
            0 52 mm
            weight of the machine ca. 30 kg
            Description :
            Producer: Sahinler
            Type: IK 0,8
            YOM: new
            Shaft Length: 110 mm
            Bordering Capacity: 0,8 mm
            Roll-Ø: 52 mm
            Throat Depth: 80 mm
            Dimensions of the Machine (LxWxH): 380 x 180 x 380 mm
            Weight: 30 kg


            Additional information:

            • Cast iron heavy duty main frame

            • Forward-backward adjustable sheet support

            • Easy to carry for workshops

            • Forward-backward adjustable bottom shaft

            • Rolls shafts are special steel material

            • 7 set of rolls standard


        • SKM Industriemaschinen
        • Röntgenstr. 3
        • 89264 Weißenhorn
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Flanging and Seam Rolling Machine SAHINLER IK 1,2 man.


          • SKM Industriemaschinen
          • Röntgenstr. 3
          • 89264 Weißenhorn
          • Deutschland

          • +49 (0) 7309 954 986 0
            +49 (0) 7309 954 986 1
          • info@skm-maschinen.de
            www.skm-maschinen.de
          #2032-1042 · Flanging and Seam Rolling Machine

          SAHINLER - IK 1,2 man. - - 2017 -

          Technical details
          plate thickness 1,2 mm︱0 62 mm︱weight of the machine ca. 50 kg︱
          Producer: Sahinler Type: IK 1,2 YOM: new Shaft Length: 140 mm Bordering Capacity: 1,2 mm Roll-Ø: 62 mm Throat Depth: 100 mm Dimensions of the Machine (LxWxH): 560 x 220 x 500 mm Weight: 50 kg Additional information: • Cast iron heavy duty main frame • Forward-backward adjustable sheet support • Easy to carry for workshops • Forward-backward adjustable bottom shaft • Rolls shafts are special steel material • 7 set of rolls standard
            plate thickness 1,2 mm
            0 62 mm
            weight of the machine ca. 50 kg
            Description :
            Producer: Sahinler
            Type: IK 1,2
            YOM: new
            Shaft Length: 140 mm
            Bordering Capacity: 1,2 mm
            Roll-Ø: 62 mm
            Throat Depth: 100 mm

            Dimensions of the Machine (LxWxH): 560 x 220 x 500 mm
            Weight: 50 kg


            Additional information:

            • Cast iron heavy duty main frame

            • Forward-backward adjustable sheet support

            • Easy to carry for workshops

            • Forward-backward adjustable bottom shaft

            • Rolls shafts are special steel material

            • 7 set of rolls standard


        • SKM Industriemaschinen
        • Röntgenstr. 3
        • 89264 Weißenhorn
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Flanging and Seam Rolling Machine STUeCKMANN & HILLEN UBS 63


          • Kurt Steiger Werkzeugmaschinen GmbH
          • Flachstr. 11
          • 65197 Wiesbaden
          • Deutschland

          • +49 (0) 611/421047
            +49 (0) 611/421040
          • info@kurt-steiger.de
            www.kurt-steiger.de
          #2043-26555 · Flanging and Seam Rolling Machine

          STUeCKMANN & HILLEN - UBS 63 - - 1988 -

          Technical details
          plate thickness mm︱roll diameter mm︱total power requirement kW︱weight of the machine ca. t︱required space m︱
          metal sheet thickness: 1,6 mm
          spindle distance: 63 mm
          working speed: 3,2 - 16 m/min
          engine: 380 V, 0,75 kW
          space needed: 645 x 250 x 1350 mm
          D2f982f
          weight: 220 kg
            Description :
            metal sheet thickness: 1,6 mm

            spindle distance: 63 mm

            working speed: 3,2 - 16 m/min

            engine: 380 V, 0,75 kW

            space needed: 645 x 250 x 1350 mm

            D2f982f

            weight: 220 kg


        • Kurt Steiger Werkzeugmaschinen GmbH
        • Flachstr. 11
        • 65197 Wiesbaden
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Flanging and Seam Rolling Machine OSTAS KMRP 2,5 man.


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-75303 · Flanging and Seam Rolling Machine

          OSTAS - KMRP 2,5 man. - - -Neu- -

          Technical details
          plate thickness 2,5 mm︱roll diameter 98 mm︱throat 160 mm︱total power requirement 1,5 kW︱weight of the machine ca. 0,35 t︱dimensions of the machine ca. 550x1400x1500 m︱
          Delivered with: • manual version • 4 set of wheels • Foot control • Brake motor • Emergency stop
            plate thickness 2,5 mm
            roll diameter 98 mm
            throat 160 mm
            total power requirement 1,5 kW
            weight of the machine ca. 0,35 t
            dimensions of the machine ca. 550x1400x1500 m
            Description :
            Delivered with:
            • manual version
            • 4 set of wheels
            • Foot control
            • Brake motor
            • Emergency stop


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Flanging and Seam Rolling Machine OSTAS KMRP 2,5 hydr.


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-75305 · Flanging and Seam Rolling Machine

          OSTAS - KMRP 2,5 hydr. - - -Neu- -

          Technical details
          plate thickness 2,5 mm︱roll diameter 98 mm︱throat 160 mm︱total power requirement 1,5 kW︱weight of the machine ca. 0,35 t︱dimensions of the machine ca. 550x1400x1500 m︱
          Delivered with: • hydraulic version • 4 set of wheels • Foot control • Brake motor • Emergency stop
            plate thickness 2,5 mm
            roll diameter 98 mm
            throat 160 mm
            total power requirement 1,5 kW
            weight of the machine ca. 0,35 t
            dimensions of the machine ca. 550x1400x1500 m
            Description :
            Delivered with:
            • hydraulic version
            • 4 set of wheels
            • Foot control
            • Brake motor
            • Emergency stop


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Flanging and Seam Rolling Machine WMT RM 8


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-75300 · Flanging and Seam Rolling Machine

          WMT - RM 8 - - - Neu - -

          Technical details
          plate thickness 0,8 mm︱throat 180 mm︱roll diameter mm︱weight of the machine ca. 22 Kg︱dimensions of the machine ca. 500 x 450 x 160 mm︱
          Flanging machine is equipped with: - Emergency switch - Footswitch - 7 pcs. Roll sets
            plate thickness 0,8 mm
            throat 180 mm
            weight of the machine ca. 22 Kg
            dimensions of the machine ca. 500 x 450 x 160 mm
            Description :
            Flanging machine is equipped with:
            - Emergency switch
            - Footswitch
            - 7 pcs. Roll sets


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Flanging and Seam Rolling Machine OSTAS KMRH-4.0


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-75304 · Flanging and Seam Rolling Machine

          OSTAS - KMRH-4.0 - - - Neu - -

          Technical details
          plate thickness 4 mm︱roll diameter 125 mm︱throat 200 mm︱total power requirement 2,2 kW︱weight of the machine ca. 0,48 t︱dimensions of the machine ca. 1,6 x 0,6 x 1,2 mm︱
          • 5 speeds • With foot control • With brake motor • With emergency stop • With hydraulic roller adjustment • With 4 roller sets
            plate thickness 4 mm
            roll diameter 125 mm
            throat 200 mm
            total power requirement 2,2 kW
            weight of the machine ca. 0,48 t
            dimensions of the machine ca. 1,6 x 0,6 x 1,2 mm
            Description :
            • 5 speeds
            • With foot control
            • With brake motor
            • With emergency stop
            • With hydraulic roller adjustment
            • With 4 roller sets


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Flanging and Seam Rolling Machine OSTAS KMRP-1,2


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-75302 · Flanging and Seam Rolling Machine

          OSTAS - KMRP-1,2 - - - Neu - -

          Technical details
          plate thickness 1,2 mm︱roll diameter 62 mm︱throat 100 mm︱total power requirement 0,75 kW︱weight of the machine ca. 130 kg︱dimensions of the machine ca. 1,1 x 0,5 x 1,3 m︱
          Flanging machine is equipped with: - Emergency switch - Footswitch - 7 pcs. Roll sets
            plate thickness 1,2 mm
            roll diameter 62 mm
            throat 100 mm
            total power requirement 0,75 kW
            weight of the machine ca. 130 kg
            dimensions of the machine ca. 1,1 x 0,5 x 1,3 m
            Description :
            Flanging machine is equipped with:
            - Emergency switch
            - Footswitch
            - 7 pcs. Roll sets


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact

          Hydr. pressbrake

          used Sheet metal working / shaeres / bending Hydr. pressbrake BAYKAL APHS 41200


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4021082 · Hydr. pressbrake

          BAYKAL - APHS 41200 - - NEU - DELEM DA 66T

          Technical details
          pressure 200 t︱chamfer lenght 4100 mm︱distance between columns 3550 mm︱ 410 mm︱Control DELEM DA 66T ︱table width 90 mm︱table height over floor 880 mm︱dayligth 530 mm︱piston stroke 260 mm︱ 160 mm/s︱ 10 mm/s︱return speed 110 mm/sec︱ 1000 mm︱ 160 mm︱machine weight ab. 14500 kg︱dimensions 4830 x 2240 x 2890 mm︱
            pressure 200 t
            chamfer lenght 4100 mm
            distance between columns 3550 mm
            410 mm
            Control DELEM DA 66T
            table width 90 mm
            table height over floor 880 mm
            dayligth 530 mm
            piston stroke 260 mm
            160 mm/s
            10 mm/s
            return speed 110 mm/sec
            1000 mm
            160 mm
            machine weight ab. 14500 kg
            dimensions 4830 x 2240 x 2890 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake BAYKAL APHS 41240


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4021083 · Hydr. pressbrake

          BAYKAL - APHS 41240 - - NEU - DELEM DA 66T

          Technical details
          pressure 240 t︱chamfer lenght 4100 mm︱distance between columns 3550 mm︱ 410 mm︱Control DELEM DA 66T ︱table width 90 mm︱table height over floor 880 mm︱dayligth 530 mm︱piston stroke 260 mm︱ 150 mm/s︱ 10 mm/s︱return speed 100 mm/sec︱ 1000 mm︱ 160 mm︱machine weight ab. 16000 kg︱dimensions 4900 x 1550 x 2600 mm︱
            pressure 240 t
            chamfer lenght 4100 mm
            distance between columns 3550 mm
            410 mm
            Control DELEM DA 66T
            table width 90 mm
            table height over floor 880 mm
            dayligth 530 mm
            piston stroke 260 mm
            150 mm/s
            10 mm/s
            return speed 100 mm/sec
            1000 mm
            160 mm
            machine weight ab. 16000 kg
            dimensions 4900 x 1550 x 2600 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake BAYKAL APHS 31120


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4021067 · Hydr. pressbrake

          BAYKAL - APHS 31120 - - NEU - DELEM DA 66T

          Technical details
          pressure 120 t︱chamfer lenght 3100 mm︱distance between columns 2550 mm︱Control DELEM DA 66T ︱table width 60 mm︱table height over floor 870 mm︱dayligth 540 mm︱piston stroke 260 mm︱ 160 mm/s︱ 10 mm/s︱return speed 130 mm/sec︱ 1000 mm︱ 160 mm︱machine weight ab. 9000 kg︱dimensions 3820 x 1800 x 2550 mm︱
            pressure 120 t
            chamfer lenght 3100 mm
            distance between columns 2550 mm
            Control DELEM DA 66T
            table width 60 mm
            table height over floor 870 mm
            dayligth 540 mm
            piston stroke 260 mm
            160 mm/s
            10 mm/s
            return speed 130 mm/sec
            1000 mm
            160 mm
            machine weight ab. 9000 kg
            dimensions 3820 x 1800 x 2550 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake LAG GHT 185-3000


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4020902 · Hydr. pressbrake

          LAG - GHT 185-3000 - - NEU - DELEM DA-66T

          Technical details
          pressure 185 t︱chamfer lenght 3100 mm︱distance between columns 2600 mm︱throat 500 mm︱ 300 mm︱dayligth 500 mm︱work height max. 950 mm︱working feed 0-10 mm/sec︱return speed 140 mm/sec︱engine output 18,5 kW︱control DELEM DA-66T ︱weight of the machine ca. 15000 kg︱dimensions of the machine ca. 4000x2600x3400 mm︱
            pressure 185 t
            chamfer lenght 3100 mm
            distance between columns 2600 mm
            throat 500 mm
            300 mm
            dayligth 500 mm
            work height max. 950 mm
            working feed 0-10 mm/sec
            return speed 140 mm/sec
            engine output 18,5 kW
            control DELEM DA-66T
            weight of the machine ca. 15000 kg
            dimensions of the machine ca. 4000x2600x3400 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake BAYKAL APHS 31300


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4021080 · Hydr. pressbrake

          BAYKAL - APHS 31300 - - NEU - DELEM DA 66T

          Technical details
          pressure 300 t︱chamfer lenght 3100 mm︱distance between columns 2550 mm︱Control DELEM DA 66T ︱table width 90 mm︱table height over floor 880 mm︱dayligth 530 mm︱piston stroke 260 mm︱ 130 mm/s︱ 10 mm/s︱return speed 120 mm/sec︱ 1000 mm︱ 160 mm︱machine weight ab. 15500 kg︱dimensions 3820 x 2890 x 3150 mm︱
            pressure 300 t
            chamfer lenght 3100 mm
            distance between columns 2550 mm
            Control DELEM DA 66T
            table width 90 mm
            table height over floor 880 mm
            dayligth 530 mm
            piston stroke 260 mm
            130 mm/s
            10 mm/s
            return speed 120 mm/sec
            1000 mm
            160 mm
            machine weight ab. 15500 kg
            dimensions 3820 x 2890 x 3150 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake BAYKAL APHS 26090


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4021065 · Hydr. pressbrake

          BAYKAL - APHS 26090 - - NEU - DELEM DA 66T

          Technical details
          pressure 90 t︱chamfer lenght 2600 mm︱distance between columns 2050 mm︱Control DELEM DA 66T ︱table width 60 mm︱table height over floor 860 mm︱dayligth 530 mm︱piston stroke 260 mm︱ 150 mm/s︱ 10 mm/s︱return speed 130 mm/s︱ 1000 mm︱machine weight ab. 7100 kg︱dimensions 3320 x 2220 x 2600 mm︱
            pressure 90 t
            chamfer lenght 2600 mm
            distance between columns 2050 mm
            Control DELEM DA 66T
            table width 60 mm
            table height over floor 860 mm
            dayligth 530 mm
            piston stroke 260 mm
            150 mm/s
            10 mm/s
            return speed 130 mm/s
            1000 mm
            machine weight ab. 7100 kg
            dimensions 3320 x 2220 x 2600 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake FARINA GBP PLUS 30220


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4020952 · Hydr. pressbrake

          FARINA - GBP PLUS 30220 - - Neu - CYBELEC VisiTouch 19 2D

          Technical details
          pressure 220 t︱chamfer lenght 3150 mm︱distance between columns 2600 mm︱Control CYBELEC VisiTouch 19 2D ︱dayligth 525 mm︱stroke 275 mm︱feed down 150 mm/sec︱feed bending 0-10 mm/sec︱feed up 120 mm/sec︱total power requirement 18,5 kW︱weight of the machine ca. 15.600 kg︱dimensions of the machine ca. 4250x2000x3150 mm︱
            pressure 220 t
            chamfer lenght 3150 mm
            distance between columns 2600 mm
            Control CYBELEC VisiTouch 19 2D
            dayligth 525 mm
            stroke 275 mm
            feed down 150 mm/sec
            feed bending 0-10 mm/sec
            feed up 120 mm/sec
            total power requirement 18,5 kW
            weight of the machine ca. 15.600 kg
            dimensions of the machine ca. 4250x2000x3150 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake FARINA BSA PLUS 30200


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4021135 · Hydr. pressbrake

          FARINA - BSA PLUS 30200 - - NEU -

          Technical details
          pressure 200 t︱chamfer lenght 3000 mm︱distance between columns mm︱throat mm︱distance between table / ram mm︱stroke mm︱feed down mm/sec︱feed bending mm/sec︱feed up mm/sec︱engine output kW︱weight of the machine ca. kg︱
            pressure 200 t
            chamfer lenght 3000 mm
            Description :



        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake FARINA PFO 130/30


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4021056 · Hydr. pressbrake

          FARINA - PFO 130/30 - - NEU -

          Technical details
          pressure 130 t︱chamfer lenght 3150 mm︱distance between columns 2600 mm︱engine output 15 kW︱weight of the machine ca. 10900 kg︱dimensions of the machine ca. 3990x1750x2900 mm︱
          Domestic equipments: - DELEM DA66T - 2D CNC control with LCD color display for control of 7 axes: Y1 = 1 ° cylinder Y2 = 2 ° cylinder X1 = horizontal movement of the backgauge X3 = horizontal movement of the stop finger / inclination R = vertical movement of the backgauge Z1-Z2 = lateral movement of the stop fingers - Top Dead Center - Speed ??changeover point - bending end - Deactivation point of the safety light barrier - Retreat stop - CNC controlled proportional pressure control - conical bending - USB port - DFC stator suspension compensation - Motorized back gauge model "AS" with 5 controlled axes - X-axis: 1000 mm stroke, X3-axis: 200 mm stroke - R-axis: 250 mm stroke - Hydraulic upper tool clamping make Wila, type: "Premium" NSCL-II-HC - Manual Unterwerkzeugklemmung, make Wila - Incl. Tools: sectioned, hardened and ground: Upper tool: Type: Wila BIU-021 Lower tool: Type: 4-V - Hydraulic compensation - "Platinum Package" consisting of: Active dynamic crowning Compensation of the stator suspension Sheet thickness measuring system diagnostic module - Active dynamic crowning device: Constant angle over the entire length Complete management of the crowning fully automatic Constant angle on the sides and in the middle No speed reduction The system works automatically and is almost invisible, no additional equipment required - Compensation of the stator suspension Bending sheet metal plates of different lengths without that The program parameters need to be changed. Bending of notched or perforated sheets without The program parameters need to be changed. Possibility of parts to work with reduced dimensions then test the workpiece with the actual dimensions without having to change the program parameters. No speed reduction during processing. The system works automatically and is almost invisible, no accessories required. - Sheet thickness measuring system Increased accuracy Fully automatic system Less waste Control of the material No speed reduction The system works automatically and is almost invisible, no accessories required - Soft start system "Start / Stop" to save energy - Control cabinet cooling - Hydraulic parts from Hoerbiger and Denison - Electrical parts from Rockwell Automation, Allen Bradley, Schneider, Siemens, Delem - Cabinet lighting through a LED strip - Machine lighting behind the machine with 2 LED strips - Footswitch - Laser safety system "DSP AP MSC" with height-adjustable Special arms. The system allows a speed change of only 2 mm from sheet metal and optimizes cycle times and maximum safety. - 2 front support arms (500mm): laterally movable and manually height adjustable by handwheel. - side and rear safety devices - Service key - Operating instructions and maintenance manual - Machine without oil - Machine according to standard 2006/42 / CE and CE certificate
            pressure 130 t
            chamfer lenght 3150 mm
            distance between columns 2600 mm
            engine output 15 kW
            weight of the machine ca. 10900 kg
            dimensions of the machine ca. 3990x1750x2900 mm
            Description :
            Domestic equipments:
            - DELEM DA66T - 2D CNC control with LCD color display for control
            of 7 axes:
            Y1 = 1 ° cylinder
            Y2 = 2 ° cylinder
            X1 = horizontal movement of the backgauge
            X3 = horizontal movement of the stop finger / inclination
            R = vertical movement of the backgauge
            Z1-Z2 = lateral movement of the stop fingers

            - Top Dead Center
            - Speed ??changeover point
            - bending end
            - Deactivation point of the safety light barrier
            - Retreat stop
            - CNC controlled proportional pressure control
            - conical bending
            - USB port
            - DFC stator suspension compensation
            - Motorized back gauge model "AS" with 5 controlled axes
            - X-axis: 1000 mm stroke, X3-axis: 200 mm stroke
            - R-axis: 250 mm stroke
            - Hydraulic upper tool clamping make Wila, type: "Premium" NSCL-II-HC
            - Manual Unterwerkzeugklemmung, make Wila
            - Incl. Tools: sectioned, hardened and ground:
            Upper tool: Type: Wila BIU-021
            Lower tool: Type: 4-V
            - Hydraulic compensation

            - "Platinum Package" consisting of:
            Active dynamic crowning
            Compensation of the stator suspension
            Sheet thickness measuring system
            diagnostic module

            - Active dynamic crowning device:
            Constant angle over the entire length
            Complete management of the crowning
            fully automatic
            Constant angle on the sides and in the middle
            No speed reduction
            The system works automatically and is almost invisible,
            no additional equipment required

            - Compensation of the stator suspension
            Bending sheet metal plates of different lengths without that
            The program parameters need to be changed.
            Bending of notched or perforated sheets without
            The program parameters need to be changed.
            Possibility of parts to work with reduced dimensions
            then test the workpiece with the actual dimensions
            without having to change the program parameters.
            No speed reduction during processing.
            The system works automatically and is almost invisible, no accessories
            required.


            - Sheet thickness measuring system
            Increased accuracy
            Fully automatic system
            Less waste
            Control of the material
            No speed reduction
            The system works automatically and is almost invisible, no accessories
            required

            - Soft start system "Start / Stop" to save energy
            - Control cabinet cooling
            - Hydraulic parts from Hoerbiger and Denison
            - Electrical parts from Rockwell Automation, Allen Bradley, Schneider,
            Siemens, Delem
            - Cabinet lighting through a LED strip
            - Machine lighting behind the machine with 2 LED strips
            - Footswitch
            - Laser safety system "DSP AP MSC" with height-adjustable
            Special arms. The system allows a speed change of only 2 mm
            from sheet metal and optimizes cycle times and maximum safety.
            - 2 front support arms (500mm): laterally movable and manually
            height adjustable by handwheel.
            - side and rear safety devices
            - Service key
            - Operating instructions and maintenance manual
            - Machine without oil
            - Machine according to standard 2006/42 / CE and CE certificate


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake FARINA BSA PLUS 40320


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4021137 · Hydr. pressbrake

          FARINA - BSA PLUS 40320 - - NEU -

          Technical details
          pressure 320 t︱chamfer lenght 4000 mm︱stroke 350 mm︱arm length 400 mm︱
            pressure 320 t
            chamfer lenght 4000 mm
            stroke 350 mm
            arm length 400 mm
            Description :



        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake BAYKAL APHS 31160


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4021049 · Hydr. pressbrake

          BAYKAL - APHS 31160 - - NEU - CYBELEC VisiTouch 19-2D

          Technical details
          pressure 160 t︱chamfer lenght 3100 mm︱distance between columns 2550 mm︱throat 410 mm︱table width 60 mm︱table height 870 mm︱dayligth 530 mm︱piston stroke 260 mm︱ 200 mm/sec︱return speed 160 mm/sec︱ 1000 mm︱ 160 mm︱engine output 15 kW︱quantity of oil 180 l︱Control CYBELEC VisiTouch 19-2D ︱weight of the machine ca. 10.000 kg︱dimensions of the machine ca. 4100x1800x2700 mm︱
            pressure 160 t
            chamfer lenght 3100 mm
            distance between columns 2550 mm
            throat 410 mm
            table width 60 mm
            table height 870 mm
            dayligth 530 mm
            piston stroke 260 mm
            200 mm/sec
            return speed 160 mm/sec
            1000 mm
            160 mm
            engine output 15 kW
            quantity of oil 180 l
            Control CYBELEC VisiTouch 19-2D
            weight of the machine ca. 10.000 kg
            dimensions of the machine ca. 4100x1800x2700 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake BAYKAL APHS 41160


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4021081 · Hydr. pressbrake

          BAYKAL - APHS 41160 - - NEU - DELEM DA 66T

          Technical details
          pressure 160 t︱chamfer lenght 4100 mm︱distance between columns 3550 mm︱ 410 mm︱Control DELEM DA 66T ︱table width 60 mm︱table height over floor 880 mm︱dayligth 530 mm︱piston stroke 260 mm︱ 170 mm/s︱ 10 mm/s︱return speed 120 mm/sec︱ 1000 mm︱ 160 mm︱machine weight ab. 12500 kg︱dimensions 4830 x 2240 x 2890 mm︱
            pressure 160 t
            chamfer lenght 4100 mm
            distance between columns 3550 mm
            410 mm
            Control DELEM DA 66T
            table width 60 mm
            table height over floor 880 mm
            dayligth 530 mm
            piston stroke 260 mm
            170 mm/s
            10 mm/s
            return speed 120 mm/sec
            1000 mm
            160 mm
            machine weight ab. 12500 kg
            dimensions 4830 x 2240 x 2890 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake PLACKE EQPB-2 BabyPress 6,2t x 285 mm


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2300004 · Hydr. pressbrake

          PLACKE - EQPB-2 BabyPress 6,2t x 285 mm - - NEU - DELEM DA 41T

          Technical details
          pressure 6,2 t︱chamfer lenght 285 mm mm︱distance between columns 230 mm︱dayligth 215 mm︱throat 70 mm︱stroke 100 mm︱working feed 9,8 mm/sec︱return speed 50 mm/sec︱quantity of oil 10 l︱Control DELEM DA 41T ︱total power requirement 0,7 kW︱weight of the machine ca. 250 kg︱dimensions 900 x 1300 x 550 mm︱
          • Basic version as a C-frame • Compact table model • Ideal for prototypes and small series • Very short setup time • Functionally simple • Wide range of applications • Low noise level • Low energy consumption • Easy handling including special equipment: - CNC control DELEM DA 41T
            pressure 6,2 t
            chamfer lenght 285 mm mm
            distance between columns 230 mm
            dayligth 215 mm
            throat 70 mm
            stroke 100 mm
            working feed 9,8 mm/sec
            return speed 50 mm/sec
            quantity of oil 10 l
            Control DELEM DA 41T
            total power requirement 0,7 kW
            weight of the machine ca. 250 kg
            dimensions 900 x 1300 x 550 mm
            Description :
            • Basic version as a C-frame
            • Compact table model
            • Ideal for prototypes and small series
            • Very short setup time
            • Functionally simple
            • Wide range of applications
            • Low noise level
            • Low energy consumption
            • Easy handling

            including special equipment:
            - CNC control DELEM DA 41T


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake ERMAK POWER BEND FALCON 1270x60S


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2300003 · Hydr. pressbrake

          ERMAK - POWER BEND FALCON 1270x60S - - NEU - DELEM DA 58 T

          Technical details
          pressure 60 t︱chamfer lenght 1270 mm︱distance between columns 1000 mm︱dayligth 530 mm︱throat 410 mm︱stroke 275 mm︱working feed 10,0 mm/sec︱return speed 165,0 mm/sec︱work height max. 900 mm︱quantity of oil 150 l︱Control DELEM DA 58 T ︱total power requirement 7,5 kW︱weight of the machine ca. 4320 kg︱dimensions 2,25 x 1,96 x 2,75 m︱
          -------------------------------------------------- --------- CNC press brake with special equipment * Version "ERGO" - knee room for the operator * flexible articulated arm mount for the controller * increased installation height * increased cylinder stroke * as well as increased bending beam speeds -------------------------------------------------- --------- Furnishing: - DELEM CNC control model DA-58T graphic/touch screen * 2D graphical programming * 15" TFT color screen with high resolution * Bending sequence calculation * Product programming and real size display * USB interface - Motorized backgauge with R-axis, on ball screws - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes : Y1 - Y2 - X - R - Deer foot upper tool with PS 135.85-R08, system "A" with quick-change clamp - additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm mount - BOSCH/HOERBIGER hydr. components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protection device v.d. machine - Swiveling control panel, mounted on the left - Front, foldable sheet metal support - Double foot control - CE mark / declaration of conformity - Operating manual: Machine and control in German - Safety manual : press brakes
            pressure 60 t
            chamfer lenght 1270 mm
            distance between columns 1000 mm
            dayligth 530 mm
            throat 410 mm
            stroke 275 mm
            working feed 10,0 mm/sec
            return speed 165,0 mm/sec
            work height max. 900 mm
            quantity of oil 150 l
            Control DELEM DA 58 T
            total power requirement 7,5 kW
            weight of the machine ca. 4320 kg
            dimensions 2,25 x 1,96 x 2,75 m
            Description :
            -------------------------------------------------- ---------
            CNC press brake with special equipment
            * Version "ERGO" - knee room for the operator
            * flexible articulated arm mount for the controller
            * increased installation height
            * increased cylinder stroke
            * as well as increased bending beam speeds
            -------------------------------------------------- ---------

            Furnishing:
            - DELEM CNC control model DA-58T graphic/touch screen
            * 2D graphical programming
            * 15" TFT color screen with high resolution
            * Bending sequence calculation
            * Product programming and real size display
            * USB interface
            - Motorized backgauge with R-axis, on ball screws
            - X = 800 mm R = 250 mm with 2 stop fingers
            - controlled axes : Y1 - Y2 - X - R
            - Deer foot upper tool with PS 135.85-R08, system "A" with quick-change clamp
            - additional crowning device in the tool holder of the upper tool
            - 4V universal die block M 460 R with die shoe 60 mm mount
            - BOSCH/HOERBIGER hydr. components
            - SIEMENS electrical system
            - LEUZE light barrier behind the machine
            - FIESSLER AKAS laser with FPSC protection device v.d. machine
            - Swiveling control panel, mounted on the left
            - Front, foldable sheet metal support
            - Double foot control
            - CE mark / declaration of conformity
            - Operating manual: Machine and control in German
            - Safety manual : press brakes


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake ERMAK POWER BEND FALCON 3.135


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2300001 · Hydr. pressbrake

          ERMAK - POWER BEND FALCON 3.135 - - NEU - DELEM DA 58 T

          Technical details
          pressure 135 t︱chamfer lenght 3100 mm︱distance between columns 2600 mm︱dayligth 550 mm︱throat 410 mm︱stroke 275 mm︱working feed 10,0 mm/sec︱return speed 120,0 mm/sec︱work height max. 900 mm︱quantity of oil 200 l︱Control DELEM DA 58 T ︱total power requirement 11 kW︱weight of the machine ca. 8650 kg︱dimensions 4250 x 2050 x 2800 mm︱
          -------------------------------------------------- --------- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds -------------------------------------------------- --------- Furnishing: - DELEM CNC control model DA-66T graphic/touch screen * 2D graphical programming * 17" TFT color screen with high resolution * Bending sequence calculation * Product programming and real size display * USB interface * intuitive, graphical entry of profiles * Automatic calculation of features: tool safety zones, Press force, bending tolerance, crown setting, stretched Length, embossing force, flattening, automatic rounding calculation * Radius programming * Graphic tool and product library * Collision monitoring * 3D visualization * 1GB memory - Motorized backgauge with R-axis, on ball screws - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Deer foot upper tool with PS 135.85-R08, system "A" with quick-change clamp - additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm mount - BOSCH/HOERBIGER hydr. components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protection device v.d. machine - Swiveling control panel, mounted on the left - 2x front support arms "Sliding-System", with T-slot and cam - 1x double foot control - CE mark / declaration of conformity - Operating manual: Machine and control in German - Safety manual : press brakes
            pressure 135 t
            chamfer lenght 3100 mm
            distance between columns 2600 mm
            dayligth 550 mm
            throat 410 mm
            stroke 275 mm
            working feed 10,0 mm/sec
            return speed 120,0 mm/sec
            work height max. 900 mm
            quantity of oil 200 l
            Control DELEM DA 58 T
            total power requirement 11 kW
            weight of the machine ca. 8650 kg
            dimensions 4250 x 2050 x 2800 mm
            Description :
            -------------------------------------------------- ---------
            Press brake with special equipment
            * increased installation height
            * increased cylinder stroke
            * as well as increased bending beam speeds
            -------------------------------------------------- ---------
            Furnishing:
            - DELEM CNC control model DA-66T graphic/touch screen
            * 2D graphical programming
            * 17" TFT color screen with high resolution
            * Bending sequence calculation
            * Product programming and real size display
            * USB interface
            * intuitive, graphical entry of profiles
            * Automatic calculation of features: tool safety zones,
            Press force, bending tolerance, crown setting, stretched
            Length, embossing force, flattening, automatic rounding calculation
            * Radius programming
            * Graphic tool and product library
            * Collision monitoring
            * 3D visualization
            * 1GB memory
            - Motorized backgauge with R-axis, on ball screws
            - X = 800 mm R = 250 mm with 2 stop fingers
            - controlled axes Y1 - Y2 - X - R - C (crowning)
            - electr. Crowning controlled by CNC
            - Deer foot upper tool with PS 135.85-R08, system "A" with quick-change clamp
            - additional crowning device in the tool holder of the upper tool
            - 4V universal die block M 460 R with die shoe 60 mm mount
            - BOSCH/HOERBIGER hydr. components
            - SIEMENS electrical system
            - LEUZE light barrier behind the machine
            - FIESSLER AKAS laser with FPSC protection device v.d. machine
            - Swiveling control panel, mounted on the left
            - 2x front support arms "Sliding-System", with T-slot and cam
            - 1x double foot control
            - CE mark / declaration of conformity
            - Operating manual: Machine and control in German
            - Safety manual : press brakes


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •