sheet width 0500 mm︱plate thickness 1,50 mm︱stations 13 ︱reference material (tensile strength) 400 N/mm²︱coil outside dia. max. 1700 mm︱coil weight max. 3,0 t︱speed max. 40 m/min︱working direction right - left ︱space requirement ca. 30 x 6 m︱

---

The line consists of: * coil lifting device - maker Arku - year 1994 - lifting of coil prism hydraulic * decoiler - maker Arku - year 1994 - mandrel- ( with segments ) 406 / 508 / 610 mm - expansion hydraulic - shifting base plate hydraulic - drive 3-phase-current motor * strip edge control Arku - year 1994 * looping pit equipment * rollformer - maker Yoder - no. of stations 13 - work shaft-diameter 50,4 mm - shaft distance vertical 120 - 180 mm - shaft distance horizontal 380 mm - assembly width of roll sets 520 mm - height adjustment of upper shaft manual - changing system of roll sets changing sets - main drive D.C. motor - driving power 37 kW * application device for spraying adhesive - no. of nozzles 9 * mounting table for insulating material * flying cutting-to-length (saw) - maker Technik Control - year 1990 - saw blade- diameter 500 mm - positioning drive servo motor drive 12 kW * exit roller table * electrics approx. 1975 / 1994 * hydraulics

---

R O L L F O R M I N G L I N E with flying saw Construction: DREISTERN Type: P 60 - flying saw type: CTF 58/40 New: 1965 Working area: sheet width max. 70 mm sheet thickness max. 1,1 mm for steel sheet thickness max. 1,1 mm for alu shaft diameter. 30 mm The line consists of: ===================== - Roll forming line with 10 stations, motor: 7,5 kW, 1.450 Rpm - flying saw (saw blade Ø 350 mm, 5 kW 380V), with hydraulics - outfeed table with push-off device - table for finished material - electrical cabinet - a large number of profiling rollers Weight approx.: 7,6 to.

---

Coil Weight 2 x 5,0 t︱Material Width max. 250 mm︱Material Thickness max. 3,0 mm︱Required Space app. m︱Machine Weight app. t︱

---

execution: TWIN4 DOUBLE HEAD ROLL FORMING LINE speed 30 m/min. working direction left - right otherwise according to technical specification 10.89

---

material: St 360 cold rolled and galvanized speed: max. 50 m/min. in accordance to the technical specification 10.88

---

Machine dealer with own stock of 2500 m².

sheet width 480 mm︱plate thickness 3 mm︱stations 13 ︱total power requirement kW︱weight of the machine ca. 11 t︱dimensions of the machine ca. 15,x2 m︱

---

Number of stations 13 Number of straightening stations 1 Waves 60 mm Center distance, horizontal 310 mm Center distance, vertical 110 - 250 mm Speed approx. 11 m / min. Connected load approx. 20 kW Uncoiler (without drive) - Coil- , inside 508/610 mm - Coil weight 3 t Flying hydraulic scissors Roller set for hat profile The techn. Data is manufacturer or operator information and therefore for us not binding. We reserve the right to make an interim sale; it applies exclusively our business and conditions of sale.

sheet width 160 mm︱plate thickness 2 mm︱stations 6 ︱total power requirement 12 kW︱weight of the machine ca. 4 t︱dimensions of the machine ca. 7 x 1,5 x 1,5 m︱

---

• with coil KEMMERICH, type V500 (maximum weight of coil: 500 kg), • with cut-off-unit by 3 000 mm, • Drive motor newly winded and adjusted,

---

UNUSED PROFILING LINE (ROLL FORM LINE) for CAP-profiles -MOBILE EXECUTION- working direction: right - left The MOBILE PROFILING LINE with punching unit is located in 2 pc. of 40"-container and is fixed mounted inside. Both container will be connetced by conveyor rack. This line is usable for processing of CAP profiles 60x70mm and thickness of 1,50 mm. Line cosisting of: decoiler rollform-unit (rollform-container) conveyor rack punching unit (punching container) profile storage electric hydraulic

---

Width adjustment continuously from 30 - 880 mm in the inlet Can be used with one-sided passage for inclined, fitted and conic shares from 50 mm axle dimension