Stamping and Punching Machine

Movement X without rep. 2535 mm︱Movement Y 1280 mm︱Plate thickness MS. max. 8 mm︱X speed max. 100 m/min︱Y speed max. 60 m/min︱X-Y speed simult, max 116 m/min︱Number of strokes 1200 1/min︱Punch power max. 220 kN︱Punch Ø max. 76,2 mm︱Max. workpiece weight 200 kg︱Tools automatic changing 18 Stk.︱main switch on 122039 Std.︱

---

The machine is in good condition. standard equipment: - Stable C-frame - Coordinate guidance with integrated linear magazine, 18 tool positions, automatic tool changer, 3 clamping claws - Automatic parts chute - Drives: Maintenance-free three-phase servo motors - Punching head: Hydraulic mono tool holder, 360° rotation for all tools, automatic tool length compensation, tool spray lubrication, 2nd lubricant container, programmable wiper movement, punching slug suction, - Programmable hold-down device for repositioning with preselectable hold-down force - Programmable logic controller, easy to use, diagnostic functions, Tops 2000 graphics programming, integrated 3.5" floppy disk drive, BNC and RJ 45 network connection - Safety: CE mark, multi-beam light barriers, Quick shutdown hydraulics

108 ︱Movement X without rep. 1270 mm︱Movement Y 1270 mm︱Plate thickness MS. max. 6,4 mm︱X speed max. 90 m/min︱Y speed max. 60 m/min︱X-Y speed simult, max 108 m/min︱Number of strokes 900 1/min︱Punch power max. 180 kN︱Punch Ø max. 76 mm︱Max. workpiece weight 75 kg︱Tools automatic changing 9 Stk.︱

---

The machine is in good condition. Standard equipment: - Security light barriers - 9 cartridges and die carrier - 2 sheet clamps - Automatic tool change - Full rotation of all tools - Programmable stripper - function Multitool, - punching slug suction system - part removal chute (200mm x 200mm) with 2 containers - digital, NC-controlled and maintenance free 3-phase motors - automatic repositioning - compensation of tool length variation - deformation capability - network connection RJ 45 - 3,5’’ disk drive - graphic software TOPS 2000 - online diagnose via modem - operators manual Additional equipment: + tapping function + Engraving and beading function + tool spray lubrication + table extension: second positioning pin + Start post

Movement X without rep. 2585 mm︱Movement Y 1250 mm︱Plate thickness MS. max. 8 mm︱X speed max. 90 m/min︱Y speed max. 60 m/min︱X-Y speed simult, max 108 m/min︱Number of strokes 780 1/min︱Punch power max. 220 kN︱Punch Ø max. 76 mm︱Max. workpiece weight 230 kg︱Tools automatic changing 18 Stk.︱main switch on 37257 Std.︱

---

The machine is in good condition. Partially overhauling of the machine, delivery of spare parts free of charge 3 months after installation Surcharge 7.500 €, / time of delivery + 2 weeks Workshopoverhauling of the machine with documentation, delivery of spare parts free of charge 6 months after installation Surcharge 15.000 €, / time of delivery + 3 weeks Standard equipment: - Safety light barriers - 3 sheet clamps - Automatic tool change - Full rotation of all tools - Programmable stripper - Punching slug suction system - Programmable spray tool lubrication - Part removal chute up to 500mm x 500mm - automatic repositioning - Tool length compensation - Scrap box - Graphic aided programming at the control with Bosch Trumagraph - Owners manual