European network of stockholding machinery dealers

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:

          Laser Punching Machine

          Machinelist: Laser Punching Machine


          Laser Punching Machine

          used Sheet metal working / shaeres / bending Laser Punching Machine TRUMPF TruMatic 7000 (K08G)


          • Broziat GmbH
          • Vorwerker Str. 62a-64
          • 23554 Lübeck
          • Deutschland

          • +49 451 40 40 19
            +49 451 40 73 93
          • info@Broziat.de
            https://broziat.com
          #2040-100517 · Laser Punching Machine

          TRUMPF - TruMatic 7000 (K08G) - - 2019 -

          Technical details
          Laser power 4000 W︱Movement Y 1550 mm︱Movement X without rep. 3050 mm︱Punch Ø max. 76,2 mm︱Plate thickness MS. max. 8 mm︱Tools automatic changing 21 Stk.︱Punch power max. 220 kN︱Laser-Typ TruFlow 4000 -︱time resonator beam on 699 Std.︱time laser stand by 6405 Std.︱
          The machine is in good condition. standard equipment: machine - C-frame - Coordinate guidance - Linear magazine with 25 spaces for clamps and tools - Hydraulic clamping claws (4 pieces) - Drives with maintenance-free three-phase motors - Repositioning device with programmable hold-down device - Flap for stamped parts 500 x 500 mm including sensor - Foot switch clamp closing - FocusLine - Nitro Line - FastLine - FlyLine - Additional XP and Yp axis - Express cylinder laser parts - Quick flap for laser parts 500 x 500 mm including sensor - Liftable laser cutting support - Cinder cone detection TRUMP Lasers - Laser TruFlow 4000 including LensLine and optimized standby - High frequency excitation - Fine filtering of compressed air for jet pipe ventilation - Closed beam guidance cutting head - Lens cutting button with 170mm focal length - Universal cutting head quick change device (UTI) - LensLine - Control Line punching head - Electro-hydraulic punching head - Rotatable mono tool holder - Programmable hold-down position - Tool length compensation - Punching slug extraction - Calculation of fill level in the punching console - Stroke counter stamp - Spray lubrication stamp - Level monitoring of tool lubrication - Wiper position measuring system with sheet thickness measurement function steering - TRUMPF control based on Rexroth IndraMotion MTX - Touch panel with TFT color screen 19" - Integrated technology data - Programmable cutting gas pressure - Remote support interface - Automatic switch-off with wake-up function - Production plan Features - PlasmaLine Data transfer - USB interface - RJ-45 network interface - Wireless Operation Point Security - CE marking - Double-beam safety light barrier - Monitoring system for gas pressure, temperature and cooling water - Quick shutdown drives - Bulging detection - Protection against scattered radiation Extended standard equipment: (Items may be replaced by alternatively selected options) - Network installation via remote support - Cooling unit (water-air) - Compact dedusting system - 1st stop pin (right inside) - Ball tables - 2 good parts containers - Chip container - Initial filling of oil
            Laser power 4000 W
            Movement Y 1550 mm
            Movement X without rep. 3050 mm
            Punch Ø max. 76,2 mm
            Plate thickness MS. max. 8 mm
            Tools automatic changing 21 Stk.
            Punch power max. 220 kN
            Laser-Typ TruFlow 4000 -
            time resonator beam on 699 Std.
            time laser stand by 6405 Std.
            Description :
            The machine is in good condition.


            standard equipment:

            machine
            - C-frame
            - Coordinate guidance
            - Linear magazine with 25 spaces for clamps and tools
            - Hydraulic clamping claws (4 pieces)
            - Drives with maintenance-free three-phase motors
            - Repositioning device with programmable hold-down device
            - Flap for stamped parts 500 x 500 mm including sensor
            - Foot switch clamp closing
            - FocusLine
            - Nitro Line
            - FastLine
            - FlyLine
            - Additional XP and Yp axis
            - Express cylinder laser parts
            - Quick flap for laser parts 500 x 500 mm including sensor
            - Liftable laser cutting support
            - Cinder cone detection

            TRUMP Lasers
            - Laser TruFlow 4000 including LensLine and optimized standby
            - High frequency excitation
            - Fine filtering of compressed air for jet pipe ventilation
            - Closed beam guidance

            cutting head
            - Lens cutting button with 170mm focal length
            - Universal cutting head quick change device (UTI)
            - LensLine
            - Control Line

            punching head
            - Electro-hydraulic punching head
            - Rotatable mono tool holder
            - Programmable hold-down position
            - Tool length compensation
            - Punching slug extraction
            - Calculation of fill level in the punching console
            - Stroke counter stamp
            - Spray lubrication stamp
            - Level monitoring of tool lubrication
            - Wiper position measuring system with sheet thickness measurement function

            steering
            - TRUMPF control based on Rexroth IndraMotion MTX
            - Touch panel with TFT color screen 19"
            - Integrated technology data
            - Programmable cutting gas pressure
            - Remote support interface
            - Automatic switch-off with wake-up function
            - Production plan

            Features
            - PlasmaLine

            Data transfer
            - USB interface
            - RJ-45 network interface
            - Wireless Operation Point

            Security
            - CE marking
            - Double-beam safety light barrier
            - Monitoring system for gas pressure, temperature and cooling water
            - Quick shutdown drives
            - Bulging detection
            - Protection against scattered radiation


            Extended standard equipment:
            (Items may be replaced by alternatively selected options)
            - Network installation via remote support
            - Cooling unit (water-air)
            - Compact dedusting system
            - 1st stop pin (right inside)
            - Ball tables
            - 2 good parts containers
            - Chip container
            - Initial filling of oil


        • Broziat GmbH
        • Vorwerker Str. 62a-64
        • 23554 Lübeck
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Laser Punching Machine Amada ACIES 2515T


          • PTF GmbH
          • Kreuzsteig 6
          • 72479 Straßberg
          • Deutschland

          • +49 7574 93 622 83
            +49 7574 92 17 24
          • info@ptf-maschinen.de
            www.ptf-maschinen.de
          #2054-3212 · Laser Punching Machine

          Amada - ACIES 2515T - - 2015 -

          Technical details
          Working hours machine 31888 (17.01.2024) h︱Working hours beam on 6475 (17.01.2024) h︱Laser power 4000 Watt︱Control AMNC 3i ︱Length 7870 mm︱Width 5880 mm︱x-axis 100 m / min︱y-axis 80 m / min︱Weight of machine approx. 30000 kg︱
            Working hours machine 31888 (17.01.2024) h
            Working hours beam on 6475 (17.01.2024) h
            Laser power 4000 Watt
            Control AMNC 3i
            Length 7870 mm
            Width 5880 mm
            x-axis 100 m / min
            y-axis 80 m / min
            Weight of machine approx. 30000 kg


        • PTF GmbH
        • Kreuzsteig 6
        • 72479 Straßberg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Laser Punching Machine TRUMPF TruMatic 7000 (K02G)


          • Broziat GmbH
          • Vorwerker Str. 62a-64
          • 23554 Lübeck
          • Deutschland

          • +49 451 40 40 19
            +49 451 40 73 93
          • info@Broziat.de
            https://broziat.com
          #2040-100520 · Laser Punching Machine

          TRUMPF - TruMatic 7000 (K02G) - - 2013 -

          Technical details
          Laser power 3200 W︱Movement Y 1550 mm︱Movement X without rep. 3050 mm︱X speed max. 100 m/min︱Y speed max. 60 m/min︱X-Y speed simult, max 116 m/min︱Number of strokes 1200 1/min︱Punch Ø max. 76,2 mm︱Plate thickness MS. max. 8 mm︱Max. workpiece weight 280 kg︱Tools automatic changing 21 Stk.︱Punch power max. 220 kN︱Laser-Typ TruFlow 3200 -︱main switch on 50389 Std.︱time resonator beam on 12073 Std.︱time laser stand by 46896 Std.︱
          The machine is in good condition. 1. Option: Machine installation at buyers location and partially refurbishing including function guaranty: Surcharge 36.000 € plus Transport and traveling costs 2. Option: Workshop refurbished machine including technical approval by manufacturers’ directive at our workshop, free delivery of spare parts for 6 months after installation. Surcharge: 56.000 € plus Transport and traveling costs. Delivery time +10 weeks. - Stable, easily accessible C-frame - Coordinate guidance for high-precision machining - Linear magazine with 21 tool places and 4 clamps - Drives with maintenance-free three-phase motors - Repositioning device with programmable hold-down device - Closing clamp foot switch - Ball tables - Automatic switch-off laser station - Laser TruFlow - High frequency excitation - Cooling unit - Laser control TASC 3 - Closed beam guidance - Spray pipe aeration with compressed air - Progr. Cutting gas pressure - Laser cutting head with 170 mm focal length - Universal cutting head quick-change device UTI with bus connection - LensLine - FocusLine - ControlLine - NitroLine - SprintLine - ContourLine - FlyLine - PlasmaLine - High speed cutting - Additional Xp and Yp axes - ejection cylinder laser parts - Fast flap for laser parts 500 x 500 mm - Liftable laser cutting support - Slag cone detection - Laser logbook function punching station - Electro-hydraulic punching head - Rotatable mono tool holder - Tool length compensation - Programmable hold down with adjustable hold down force - Stroke counter stamp - Spray lubrication stamp - Slug extraction - Bulge detection - Flap for stamped parts 500 x 500mm - Monitoring the filling level in the punching console steering - Open control based on Bosch Rexroth IntraMotion MTX - Control panel with 15" TFT touch screen - Program management and 80 GB storage space - Diagnostic function with laser log book - Integrated technology data - Teleservice data transmission - Network connection RJ45 and USB interface security - CE marking - Multi-beam photocells - Monitoring system for gas pressure, temperature, cooling water, etc - Quick shut-off hydraulics - Protection against scattered radiation - Compact dedusting system
            Laser power 3200 W
            Movement Y 1550 mm
            Movement X without rep. 3050 mm
            X speed max. 100 m/min
            Y speed max. 60 m/min
            X-Y speed simult, max 116 m/min
            Number of strokes 1200 1/min
            Punch Ø max. 76,2 mm
            Plate thickness MS. max. 8 mm
            Max. workpiece weight 280 kg
            Tools automatic changing 21 Stk.
            Punch power max. 220 kN
            Laser-Typ TruFlow 3200 -
            main switch on 50389 Std.
            time resonator beam on 12073 Std.
            time laser stand by 46896 Std.
            Description :
            The machine is in good condition.
            1. Option: Machine installation at buyers location and partially refurbishing including function guaranty:
            Surcharge 36.000 € plus Transport and traveling costs

            2. Option: Workshop refurbished machine including technical approval by manufacturers’ directive at our workshop, free delivery of spare parts for 6 months after installation.
            Surcharge: 56.000 € plus Transport and traveling costs. Delivery time +10 weeks.

            - Stable, easily accessible C-frame
            - Coordinate guidance for high-precision machining
            - Linear magazine with 21 tool places and 4 clamps
            - Drives with maintenance-free three-phase motors
            - Repositioning device with programmable hold-down device
            - Closing clamp foot switch
            - Ball tables
            - Automatic switch-off

            laser station
            - Laser TruFlow
            - High frequency excitation
            - Cooling unit
            - Laser control TASC 3
            - Closed beam guidance
            - Spray pipe aeration with compressed air
            - Progr. Cutting gas pressure
            - Laser cutting head with 170 mm focal length
            - Universal cutting head quick-change device UTI with bus connection
            - LensLine
            - FocusLine
            - ControlLine
            - NitroLine
            - SprintLine
            - ContourLine
            - FlyLine
            - PlasmaLine
            - High speed cutting
            - Additional Xp and Yp axes
            - ejection cylinder laser parts
            - Fast flap for laser parts 500 x 500 mm
            - Liftable laser cutting support
            - Slag cone detection
            - Laser logbook function

            punching station
            - Electro-hydraulic punching head
            - Rotatable mono tool holder
            - Tool length compensation
            - Programmable hold down with adjustable hold down force
            - Stroke counter stamp
            - Spray lubrication stamp
            - Slug extraction
            - Bulge detection
            - Flap for stamped parts 500 x 500mm
            - Monitoring the filling level in the punching console

            steering
            - Open control based on Bosch Rexroth IntraMotion MTX
            - Control panel with 15" TFT touch screen
            - Program management and 80 GB storage space
            - Diagnostic function with laser log book
            - Integrated technology data
            - Teleservice

            data transmission
            - Network connection RJ45 and USB interface

            security
            - CE marking
            - Multi-beam photocells
            - Monitoring system for gas pressure, temperature, cooling water, etc
            - Quick shut-off hydraulics
            - Protection against scattered radiation
            - Compact dedusting system


        • Broziat GmbH
        • Vorwerker Str. 62a-64
        • 23554 Lübeck
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Laser Punching Machine Trumpf Trumatic 7000-1600 FMC


          • PTF GmbH
          • Kreuzsteig 6
          • 72479 Straßberg
          • Deutschland

          • +49 7574 93 622 83
            +49 7574 92 17 24
          • info@ptf-maschinen.de
            www.ptf-maschinen.de
          #2054-3201 · Laser Punching Machine

          Trumpf - Trumatic 7000-1600 FMC - - 2011 -

          Technical details
          Working hours machine 70.423 (09.11.2023) h︱Working hours beam on 17.098 (09.11.2023) h︱Laser power 4000 Watt︱Control Siemens ︱Length 8300 mm︱Width 8290 mm︱Machine weight 23000 kg︱
            Working hours machine 70.423 (09.11.2023) h
            Working hours beam on 17.098 (09.11.2023) h
            Laser power 4000 Watt
            Control Siemens
            Length 8300 mm
            Width 8290 mm
            Machine weight 23000 kg


        • PTF GmbH
        • Kreuzsteig 6
        • 72479 Straßberg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Laser Punching Machine TRUMPF TruMatic 7000 (K02M)


          • Broziat GmbH
          • Vorwerker Str. 62a-64
          • 23554 Lübeck
          • Deutschland

          • +49 451 40 40 19
            +49 451 40 73 93
          • info@Broziat.de
            https://broziat.com
          #2040-100515 · Laser Punching Machine

          TRUMPF - TruMatic 7000 (K02M) - - 2010 -

          Technical details
          Laser power 3200 W︱Movement Y 1250 mm︱Movement X without rep. 2550 mm︱X speed max. 100 m/min︱Y speed max. 60 m/min︱X-Y speed simult, max 116 m/min︱Number of strokes 1200 1/min︱Punch Ø max. 76,2 mm︱Plate thickness MS. max. 8 mm︱Max. workpiece weight 280 kg︱Tools automatic changing 22 Stk.︱Punch power max. 220 kN︱Laser-Typ TruFlow 3200 -︱main switch on 65285 Std.︱time resonator beam on 10832 Std.︱time laser stand by 63585 Std.︱rotation C-axe max 330 1/min︱
          The machine is overhauled in our workshop and will be sold with 6 month parts guaranty. 1. Option: Machine installation, operator training at buyers location and partially refurbishing including function guaranty: Surcharge 36.000 € plus Transport and traveling costs Standard equipment: machine - Stable, easily accessible C-frame - Mobile ball roller tables - Linear magazine for tool stations and clamping claws - 22 tool stations, 3 clamps - Foot switch for closing the claws - Flap for stamped parts 500 x 500 mm including sensor - Chip container - 2 good parts containers (punching and laser side) - Initial filling of hydraulic oil - ContourLine - FocusLine - Nitro Line - FastLine - Additional Xp and Yp axis - Express cylinder laser parts - Quick flap for laser parts 500 x 500 mm including sensor - Liftable laser cutting support - Cinder cone detection TRUMP Lasers - CO2 laser TruFlow 2700 - Optimized standby mode - Maintenance-free turbo radial blower - High frequency excitation - Laser control TASC CUTTING HEAD - Lens cutting head with 170 mm lens - Universal quick-change device (UTI) with bus connection - Control Line PUNCHING HEAD - Electro-hydraulic punching head - Hydraulic single tool holder - 360° rotation - Programmable hold-down device (active / passive / reposition) - Tool length compensation - Spray lubrication stamp - Punching slug extraction - Level monitoring of thread forming and tool lubrication STEERING - Open control based on Rexroth IndraMotion MTX - 15" TFT color screen - Teleservice via Internet - Automatic switch-off - Data transfer - USB interface - RJ45 network connection SECURITY - CE marking - Multi-beam light barriers - Quick shutdown hydraulics - Bulging detection - Calculation of fill level in the punching console
            Laser power 3200 W
            Movement Y 1250 mm
            Movement X without rep. 2550 mm
            X speed max. 100 m/min
            Y speed max. 60 m/min
            X-Y speed simult, max 116 m/min
            Number of strokes 1200 1/min
            Punch Ø max. 76,2 mm
            Plate thickness MS. max. 8 mm
            Max. workpiece weight 280 kg
            Tools automatic changing 22 Stk.
            Punch power max. 220 kN
            Laser-Typ TruFlow 3200 -
            main switch on 65285 Std.
            time resonator beam on 10832 Std.
            time laser stand by 63585 Std.
            rotation C-axe max 330 1/min
            Description :
            The machine is overhauled in our workshop and will be sold with 6 month parts guaranty.
            1. Option: Machine installation, operator training at buyers location and partially refurbishing including function guaranty:
            Surcharge 36.000 € plus Transport and traveling costs

            Standard equipment:

            machine
            - Stable, easily accessible C-frame
            - Mobile ball roller tables
            - Linear magazine for tool stations and clamping claws
            - 22 tool stations, 3 clamps
            - Foot switch for closing the claws
            - Flap for stamped parts 500 x 500 mm including sensor
            - Chip container
            - 2 good parts containers (punching and laser side)
            - Initial filling of hydraulic oil
            - ContourLine
            - FocusLine
            - Nitro Line
            - FastLine
            - Additional Xp and Yp axis
            - Express cylinder laser parts
            - Quick flap for laser parts 500 x 500 mm including sensor
            - Liftable laser cutting support
            - Cinder cone detection

            TRUMP Lasers
            - CO2 laser TruFlow 2700
            - Optimized standby mode
            - Maintenance-free turbo radial blower
            - High frequency excitation
            - Laser control TASC

            CUTTING HEAD
            - Lens cutting head with 170 mm lens
            - Universal quick-change device (UTI) with bus connection
            - Control Line

            PUNCHING HEAD
            - Electro-hydraulic punching head
            - Hydraulic single tool holder
            - 360° rotation
            - Programmable hold-down device (active / passive / reposition)
            - Tool length compensation
            - Spray lubrication stamp
            - Punching slug extraction
            - Level monitoring of thread forming and tool lubrication

            STEERING
            - Open control based on Rexroth IndraMotion MTX
            - 15" TFT color screen
            - Teleservice via Internet
            - Automatic switch-off
            - Data transfer
            - USB interface
            - RJ45 network connection

            SECURITY
            - CE marking
            - Multi-beam light barriers
            - Quick shutdown hydraulics
            - Bulging detection
            - Calculation of fill level in the punching console


        • Broziat GmbH
        • Vorwerker Str. 62a-64
        • 23554 Lübeck
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Laser Punching Machine TRUMPF TruMatic 6000 (K01G)


          • Broziat GmbH
          • Vorwerker Str. 62a-64
          • 23554 Lübeck
          • Deutschland

          • +49 451 40 40 19
            +49 451 40 73 93
          • info@Broziat.de
            https://broziat.com
          #2040-100487 · Laser Punching Machine

          TRUMPF - TruMatic 6000 (K01G) - - 2007 -

          Technical details
          Laser power 2000 W︱Movement Y 1650 mm︱Movement X without rep. 2585 mm︱X speed max. 90 m/min︱Y speed max. 60 m/min︱X-Y speed simult, max 108 m/min︱Number of strokes 900 1/min︱Punch Ø max. 76,2 mm︱Plate thickness MS. max. 8 mm︱Max. workpiece weight 200 kg︱Tools automatic changing 18 Stk.︱Punch power max. 220 kN︱Laser-Typ TruFlow 2000 -︱main switch on 82517 Std.︱time resonator beam on 5249 Std.︱time laser stand by 55843 Std.︱rotation C-axe max 330 1/min︱
          The machine is in good condition. 1. Instalacja maszyny wraz z cz??ciowym remontem i szkoleniem operatora - 25 000 Euro plus koszty transportu i delegacji serwisu 2. Remont maszyny wraz z 6 m-c gwarancj? na bezp?atn? dostawe cz??ci zamiennych, instalacja, szkolenie operatora - 48 000 Euro plus koszty transportu i delegacji serwisu.
            Laser power 2000 W
            Movement Y 1650 mm
            Movement X without rep. 2585 mm
            X speed max. 90 m/min
            Y speed max. 60 m/min
            X-Y speed simult, max 108 m/min
            Number of strokes 900 1/min
            Punch Ø max. 76,2 mm
            Plate thickness MS. max. 8 mm
            Max. workpiece weight 200 kg
            Tools automatic changing 18 Stk.
            Punch power max. 220 kN
            Laser-Typ TruFlow 2000 -
            main switch on 82517 Std.
            time resonator beam on 5249 Std.
            time laser stand by 55843 Std.
            rotation C-axe max 330 1/min
            Description :
            The machine is in good condition.
            1. Instalacja maszyny wraz z cz??ciowym remontem i szkoleniem operatora - 25 000 Euro plus koszty transportu i delegacji serwisu

            2. Remont maszyny wraz z 6 m-c gwarancj? na bezp?atn? dostawe cz??ci zamiennych, instalacja, szkolenie operatora - 48 000 Euro plus koszty transportu i delegacji serwisu.



        • Broziat GmbH
        • Vorwerker Str. 62a-64
        • 23554 Lübeck
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Laser Punching Machine Amada EML 3610


          • PTF GmbH
          • Kreuzsteig 6
          • 72479 Straßberg
          • Deutschland

          • +49 7574 93 622 83
            +49 7574 92 17 24
          • info@ptf-maschinen.de
            www.ptf-maschinen.de
          #2054-3209 · Laser Punching Machine

          Amada - EML 3610 - - 2006 -

          Technical details
          Working hours machine 61.000 h︱Laser power 4000 Watt︱Control AMNC-F ︱Length 6354 mm︱Width 5880 mm︱Machine weight 30000 kg︱x-axis 100 m / min︱y-axis 80 m / min︱
            Working hours machine 61.000 h
            Laser power 4000 Watt
            Control AMNC-F
            Length 6354 mm
            Width 5880 mm
            Machine weight 30000 kg
            x-axis 100 m / min
            y-axis 80 m / min


        • PTF GmbH
        • Kreuzsteig 6
        • 72479 Straßberg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Laser Punching Machine TRUMPF TruMatic 3000 (K03M) coax


          • Broziat GmbH
          • Vorwerker Str. 62a-64
          • 23554 Lübeck
          • Deutschland

          • +49 451 40 40 19
            +49 451 40 73 93
          • info@Broziat.de
            https://broziat.com
          #2040-100519 · Laser Punching Machine

          TRUMPF - TruMatic 3000 (K03M) coax - - 2006 -

          Technical details
          Laser power 2000 W︱Movement Y 1250 mm︱Movement X without rep. 2500 mm︱X speed max. 90 m/min︱Y speed max. 60 m/min︱X-Y speed simult, max 108 m/min︱Number of strokes 600 1/min︱Punch Ø max. 76,2 mm︱Plate thickness MS. max. 4 mm︱Max. workpiece weight 120 kg︱Tools automatic changing 19 Stk.︱Punch power max. 165 kN︱Laser-Typ TCF 2000 -︱main switch on 47000 Std.︱time resonator beam on 10747 Std.︱time laser stand by 46821 Std.︱
          The machine is in good condition. 1. Option: Machine installation, operator training at buyers location and partially refurbishing including function guaranty: Surcharge 12.000 € plus Transport and traveling costs 2. Option: Workshop refurbished machine including technical approval by manufacturers’ directive at our workshop. Machine installation, operator training and free delivery of spare parts for 6 months after installation. Surcharge: 20.000 € plus Transport and traveling costs. Delivery time +5 weeks. Standard equipment: - stable c-frame - Laser TCF1 (2000W) - Hi-Las high pressure cutting - Laser-cutting head with 5’’ lens - head quick change device - APC Capacitive height regulation - Programmable cutting gas/Pressure settings - programmable performance cycle - SprintLas - logbook function laser - compact deduster - brushing table - rotating die holder - Repositioning device - Programmable stripper - chutes for parts 500 x 500 mm - autom. tool changer with 19 stations (21 – sheet clamps) - 2 sheet clamps - good part container - 2 lubricant reservoir - punching slug suction system - tool spray lubrication - turnings swarf - rapid shutdown of hydraulic system - external control panel - TFT color touchscreen 15" - USB-port - 3,5" disc drive - safety light barriers - RJ45 net port - Network incl- installation - online diagnose device - owners manual optional - Laser-cutting head with 7,5’’ lens - compressed-air cutting Additional equipment: - function multitool - function tapping - function engraving - Autolas Plus
            Laser power 2000 W
            Movement Y 1250 mm
            Movement X without rep. 2500 mm
            X speed max. 90 m/min
            Y speed max. 60 m/min
            X-Y speed simult, max 108 m/min
            Number of strokes 600 1/min
            Punch Ø max. 76,2 mm
            Plate thickness MS. max. 4 mm
            Max. workpiece weight 120 kg
            Tools automatic changing 19 Stk.
            Punch power max. 165 kN
            Laser-Typ TCF 2000 -
            main switch on 47000 Std.
            time resonator beam on 10747 Std.
            time laser stand by 46821 Std.
            Description :
            The machine is in good condition.
            1. Option: Machine installation, operator training at buyers location and partially refurbishing including function guaranty:
            Surcharge 12.000 € plus Transport and traveling costs

            2. Option: Workshop refurbished machine including technical approval by manufacturers’ directive at our workshop. Machine installation, operator training and free delivery of spare parts for 6 months after installation.
            Surcharge: 20.000 € plus Transport and traveling costs. Delivery time +5 weeks.

            Standard equipment:

            - stable c-frame
            - Laser TCF1 (2000W)
            - Hi-Las high pressure cutting
            - Laser-cutting head with 5’’ lens
            - head quick change device
            - APC Capacitive height regulation
            - Programmable cutting gas/Pressure settings
            - programmable performance cycle
            - SprintLas
            - logbook function laser
            - compact deduster
            - brushing table
            - rotating die holder
            - Repositioning device
            - Programmable stripper
            - chutes for parts 500 x 500 mm
            - autom. tool changer with 19 stations (21 – sheet clamps)
            - 2 sheet clamps
            - good part container
            - 2 lubricant reservoir
            - punching slug suction system
            - tool spray lubrication
            - turnings swarf
            - rapid shutdown of hydraulic system
            - external control panel
            - TFT color touchscreen 15"
            - USB-port
            - 3,5" disc drive
            - safety light barriers
            - RJ45 net port
            - Network incl- installation
            - online diagnose device
            - owners manual

            optional
            - Laser-cutting head with 7,5’’ lens
            - compressed-air cutting

            Additional equipment:
            - function multitool
            - function tapping
            - function engraving
            - Autolas Plus


        • Broziat GmbH
        • Vorwerker Str. 62a-64
        • 23554 Lübeck
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Laser Punching Machine TRUMPF TruMatic 6000 (K01G)


          • Broziat GmbH
          • Vorwerker Str. 62a-64
          • 23554 Lübeck
          • Deutschland

          • +49 451 40 40 19
            +49 451 40 73 93
          • info@Broziat.de
            https://broziat.com
          #2040-100518 · Laser Punching Machine

          TRUMPF - TruMatic 6000 (K01G) - - 2006 -

          Technical details
          Laser power 2700 W︱Movement Y 1650 mm︱Movement X without rep. 3085 mm︱X speed max. 90 m/min︱Y speed max. 60 m/min︱X-Y speed simult, max 108 m/min︱Number of strokes 900 1/min︱Punch Ø max. 76,2 mm︱Plate thickness MS. max. 8 mm︱Max. workpiece weight 230 kg︱Tools automatic changing 18 Stk.︱Punch power max. 220 kN︱Laser-Typ TLF 2700 -︱time resonator beam on 10356 Std.︱time laser stand by 57752 Std.︱
          The machine is in good condition. 1. Remont maszyny wraz z 6m gwarancj? na bezp?atn? dostaw? cz??ci zamiennych - 20 000 Euro plus 6 tygodni do czasu dostawy. 2. Instalacja maszyny - 9 500 Euro plus koszty transportu i delegacji serwisu. Standard equipment: - Work range X-axis 2585mm for combined operation - Hi-Las high pressure cutting - Laser-cutting head with 5’’ lens - Laser-cutting head with 7,5’’ lens - head quick change device - Programmable cutting gas/Pressure settings - Capacitive height regulation Dias III - Function: ContourLas - slag detection - Compact dust extractor - tank heating - 3 sheet clamps - Full rotation of all tools - NC-controlled, maintenance free 3-phase motor - Repositioning device - tool length compensation - rapid shutdown of hydraulic system - automatic shutdown mechanism - chutes for parts 500 x 500 mm - sensors for both chutes - 2 good part container - punching slug suction system - metal forming possible - tool spray lubrication - Programmable stripper - adaptive stroke length control - safety light barriers - online diagnose device - RJ45 network connection - 3,5’’ disk drive - owners manual
            Laser power 2700 W
            Movement Y 1650 mm
            Movement X without rep. 3085 mm
            X speed max. 90 m/min
            Y speed max. 60 m/min
            X-Y speed simult, max 108 m/min
            Number of strokes 900 1/min
            Punch Ø max. 76,2 mm
            Plate thickness MS. max. 8 mm
            Max. workpiece weight 230 kg
            Tools automatic changing 18 Stk.
            Punch power max. 220 kN
            Laser-Typ TLF 2700 -
            time resonator beam on 10356 Std.
            time laser stand by 57752 Std.
            Description :
            The machine is in good condition.
            1. Remont maszyny wraz z 6m gwarancj? na bezp?atn? dostaw? cz??ci zamiennych - 20 000 Euro plus 6 tygodni do czasu dostawy.
            2. Instalacja maszyny - 9 500 Euro plus koszty transportu i delegacji serwisu.


            Standard equipment:
            - Work range X-axis 2585mm for combined operation
            - Hi-Las high pressure cutting
            - Laser-cutting head with 5’’ lens
            - Laser-cutting head with 7,5’’ lens
            - head quick change device
            - Programmable cutting gas/Pressure settings
            - Capacitive height regulation Dias III
            - Function: ContourLas
            - slag detection
            - Compact dust extractor
            - tank heating
            - 3 sheet clamps
            - Full rotation of all tools
            - NC-controlled, maintenance free 3-phase motor
            - Repositioning device
            - tool length compensation
            - rapid shutdown of hydraulic system
            - automatic shutdown mechanism
            - chutes for parts 500 x 500 mm
            - sensors for both chutes
            - 2 good part container
            - punching slug suction system
            - metal forming possible
            - tool spray lubrication
            - Programmable stripper
            - adaptive stroke length control
            - safety light barriers

            - online diagnose device
            - RJ45 network connection
            - 3,5’’ disk drive
            - owners manual


        • Broziat GmbH
        • Vorwerker Str. 62a-64
        • 23554 Lübeck
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Laser Punching Machine TRUMPF TruMatic 6000 (K01G)


          • Broziat GmbH
          • Vorwerker Str. 62a-64
          • 23554 Lübeck
          • Deutschland

          • +49 451 40 40 19
            +49 451 40 73 93
          • info@Broziat.de
            https://broziat.com
          #2040-100490 · Laser Punching Machine

          TRUMPF - TruMatic 6000 (K01G) - - 2004 -

          Technical details
          Laser power 3200 W︱Movement Y 1650 mm︱Movement X without rep. 3085 mm︱X speed max. 90 m/min︱Y speed max. 60 m/min︱X-Y speed simult, max 108 m/min︱Number of strokes 900 1/min︱Punch Ø max. 76,2 mm︱Plate thickness MS. max. 8 mm︱Max. workpiece weight 200 kg︱Tools automatic changing 18 Stk.︱Punch power max. 220 kN︱Laser-Typ TLF 3200 -︱main switch on 94268 Std.︱time resonator beam on 11269 Std.︱time laser stand by 74238 Std.︱rotation C-axe max 330 1/min︱
          The machine is in good condition. Option 1: Machine installation and operator training at buyers location: Surcharge 9.000 € plus Transport and traveling costs Standard equipment: - Work range X-axis 2585mm for combined operation - Hi-Las high pressure cutting - Laser-cutting head with 5’’ lens - Laser-cutting head with 7,5’’ lens - head quick change device - Programmable cutting gas/Pressure settings - Capacitive height regulation Dias III - Function: ContourLas - slag detection - Compact dust extractor - tank heating - autom. tool changer with 19 stations (21 - sheet clamps) - Full rotation of all tools - NC-controlled, maintenance free 3-phase motor - Repositioning device - tool length compensation - rapid shutdown of hydraulic system - automatic shutdown mechanism - chutes for parts 500 x 500 mm - sensors for both chutes - 2 good part container - punching slug suction system - metal forming possible - tool spray lubrication - Programmable stripper - adaptive stroke length control - safety light barriers - online diagnose device - RJ45 network connection - 3,5’’ disk drive - owners manual
            Laser power 3200 W
            Movement Y 1650 mm
            Movement X without rep. 3085 mm
            X speed max. 90 m/min
            Y speed max. 60 m/min
            X-Y speed simult, max 108 m/min
            Number of strokes 900 1/min
            Punch Ø max. 76,2 mm
            Plate thickness MS. max. 8 mm
            Max. workpiece weight 200 kg
            Tools automatic changing 18 Stk.
            Punch power max. 220 kN
            Laser-Typ TLF 3200 -
            main switch on 94268 Std.
            time resonator beam on 11269 Std.
            time laser stand by 74238 Std.
            rotation C-axe max 330 1/min
            Description :
            The machine is in good condition.

            Option 1:
            Machine installation and operator training at buyers location:
            Surcharge 9.000 € plus Transport and traveling costs

            Standard equipment:
            - Work range X-axis 2585mm for combined operation
            - Hi-Las high pressure cutting
            - Laser-cutting head with 5’’ lens
            - Laser-cutting head with 7,5’’ lens
            - head quick change device
            - Programmable cutting gas/Pressure settings
            - Capacitive height regulation Dias III
            - Function: ContourLas
            - slag detection
            - Compact dust extractor
            - tank heating
            - autom. tool changer with 19 stations (21 - sheet clamps)
            - Full rotation of all tools
            - NC-controlled, maintenance free 3-phase motor
            - Repositioning device
            - tool length compensation
            - rapid shutdown of hydraulic system
            - automatic shutdown mechanism
            - chutes for parts 500 x 500 mm
            - sensors for both chutes
            - 2 good part container
            - punching slug suction system
            - metal forming possible
            - tool spray lubrication
            - Programmable stripper
            - adaptive stroke length control
            - safety light barriers

            - online diagnose device
            - RJ45 network connection
            - 3,5’’ disk drive
            - owners manual


        • Broziat GmbH
        • Vorwerker Str. 62a-64
        • 23554 Lübeck
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Laser Punching Machine TRUMPF TruMatic 6000 (K01G)


          • Broziat GmbH
          • Vorwerker Str. 62a-64
          • 23554 Lübeck
          • Deutschland

          • +49 451 40 40 19
            +49 451 40 73 93
          • info@Broziat.de
            https://broziat.com
          #2040-100516 · Laser Punching Machine

          TRUMPF - TruMatic 6000 (K01G) - - 2002 -

          Technical details
          Laser power 2700 W︱Movement Y 1650 mm︱Movement X without rep. 3085 mm︱X speed max. 90 m/min︱Y speed max. 60 m/min︱X-Y speed simult, max 108 m/min︱Number of strokes 900 1/min︱workingarea X combine 2585 mm︱Punch Ø max. 76,2 mm︱Plate thickness MS. max. 8 mm︱Tools automatic changing 18 Stk.︱Punch power max. 220 kN︱Laser-Typ TLF 2700 -︱time resonator beam on 10255 Std.︱time laser stand by 62331 Std.︱
          The machine is in good condition. standard equipment: - Hi-Las high pressure cutting - Laser cutting head with 5 lens - Laser cutting head with 7.5 lens - Cutting head quick change device - progr. Cutting gas selection/pressure setting - capacitive height control (DIAS III) - Function: ContourLas - Cinder cone detection - Compact dust extractor - Automatic tool changer with 18 stations (21 clamps) - 3 clamps - Rotation of all tools - NC-controlled digital maintenance-free three-phase drives - automatic resetting - Tool length compensation - Quick shutdown of the hydraulics - Automatic shutdown - Automatic parts slides 500 x 500 mm each - Sensors for both parts slides - Punching slug extraction - Possibility of forming - programmable punching tool lubrication - programmable hold-down device - adaptive stroke length control - Safety devices - RJ 45 network connection - 3.5 floppy disk drive
            Laser power 2700 W
            Movement Y 1650 mm
            Movement X without rep. 3085 mm
            X speed max. 90 m/min
            Y speed max. 60 m/min
            X-Y speed simult, max 108 m/min
            Number of strokes 900 1/min
            workingarea X combine 2585 mm
            Punch Ø max. 76,2 mm
            Plate thickness MS. max. 8 mm
            Tools automatic changing 18 Stk.
            Punch power max. 220 kN
            Laser-Typ TLF 2700 -
            time resonator beam on 10255 Std.
            time laser stand by 62331 Std.
            Description :
            The machine is in good condition.


            standard equipment:

            - Hi-Las high pressure cutting
            - Laser cutting head with 5 lens
            - Laser cutting head with 7.5 lens
            - Cutting head quick change device
            - progr. Cutting gas selection/pressure setting
            - capacitive height control (DIAS III)
            - Function: ContourLas
            - Cinder cone detection
            - Compact dust extractor
            - Automatic tool changer with 18 stations (21 clamps)
            - 3 clamps
            - Rotation of all tools
            - NC-controlled digital maintenance-free three-phase drives
            - automatic resetting
            - Tool length compensation
            - Quick shutdown of the hydraulics
            - Automatic shutdown
            - Automatic parts slides 500 x 500 mm each
            - Sensors for both parts slides
            - Punching slug extraction
            - Possibility of forming
            - programmable punching tool lubrication
            - programmable hold-down device
            - adaptive stroke length control
            - Safety devices

            - RJ 45 network connection
            - 3.5 floppy disk drive


        • Broziat GmbH
        • Vorwerker Str. 62a-64
        • 23554 Lübeck
        • Deutschland

        • Datasheet
          Request / Contact

          Notching Machine

          used Sheet metal working / shaeres / bending Notching Machine UNBEKANNT A 5


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-06464 · Notching Machine

          UNBEKANNT - A 5 - - Unbekannt -

          Technical details
          plate thickness 4 mm︱ Dreieck ausklinker ︱pressure . t︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            plate thickness 4 mm
            Dreieck ausklinker
            pressure . t


        • Christoph Busch GmbH
        • Dieselstr. 22
        • 41352 Korschenbroich
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Notching Machine METALLKRAFT AKM 200-6 VP


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2390001 · Notching Machine

          METALLKRAFT - AKM 200-6 VP - - NEU -

          Technical details
          plate thickness 6 mm︱pressure 12 t︱cutting range Breite x Länge 200 mm︱no. of strokes 15 Hub/min︱cutting angle 30 - 140 °︱total power requirement 4 kW︱weight of the machine ca. 1,02 t︱dimensions of the machine ca. 1065 x 900 x 1210 mm︱
            plate thickness 6 mm
            pressure 12 t
            cutting range Breite x Länge 200 mm
            no. of strokes 15 Hub/min
            cutting angle 30 - 140 °
            total power requirement 4 kW
            weight of the machine ca. 1,02 t
            dimensions of the machine ca. 1065 x 900 x 1210 mm


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Notching Machine SIMASV AF 226


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-45 · Notching Machine

          SIMASV - AF 226 - - 2021 -

          Technical details
          gebraucht20219589prompt, Zwischenverkauf vItalien7200 €︱ 11220 mm︱ 6 mm︱ 4.5 mm︱ 45 1/min︱ 90 °︱ 3 kW︱ 700 mm︱ 750 mm︱ 1100 mm︱ 540 kg︱
          DEMO MACHINE hydraulic drive automatic adjustment of the blade gap 1 set of blades for mild steel 2 gauges angle adjustable protection cover, acrylic glas foot pedal waste chute load hook machine feet according to CErules
            gebraucht
            2021
            9589
            prompt, Zwischenverkauf v
            Italien
            7200 €
            1
            1
            220 mm
            6 mm
            4.5 mm
            45 1/min
            90 °
            3 kW
            700 mm
            750 mm
            1100 mm
            540 kg
            Description :
            DEMO MACHINE
            hydraulic drive
            automatic adjustment of the blade gap
            1 set of blades for mild steel
            2 gauges angle adjustable
            protection cover, acrylic glas
            foot pedal
            waste chute
            load hook
            machine feet
            according to CErules


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Notching Machine BERNARDO MRA-Pro


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8390110 · Notching Machine

          BERNARDO - MRA-Pro - - 2020 -

          Technical details
          plate thickness 3,0 mm︱tube diameter 60,0 mm︱motor 230 Volt︱total power requirement 1,1 kW︱
            plate thickness 3,0 mm
            tube diameter 60,0 mm
            motor 230 Volt
            total power requirement 1,1 kW


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Notching Machine HUVEMA BL-3


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-S353 · Notching Machine

          HUVEMA - BL-3 - - 2020 -

          Technical details
          Knife length 125 x 125 mm︱Plate thickness 1,5 mm︱Machine weight 29 kg︱capacity in tons - max. 3 t︱
          Brand Huvema Type BL-3 Year of make 2020 Machine weight 29 kg Capacity 3 T Blade length 125 x 125 mm Plate thickness 1,5 mm
            Knife length 125 x 125 mm
            Plate thickness 1,5 mm
            Machine weight 29 kg
            capacity in tons - max. 3 t
            Description :
            Brand Huvema
            Type BL-3
            Year of make 2020
            Machine weight 29 kg
            Capacity 3 T
            Blade length 125 x 125 mm
            Plate thickness 1,5 mm



        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Notching Machine MEULEMAN KC10


          • Valk Machines BV
          • Kadijk 6
          • 8531XD Lemmer
          • Niederlande

          • +31 514562904
          • sales@valkmachines.com
            www.valkmachines.com
          #2079-35 · Notching Machine

          MEULEMAN - KC10 - - 2018 -

          Technical details
          ︱total power requirement kW︱weight of the machine ca. t︱required space m︱
          Capacity: Ø41,9 x 2,7 R21 x 8 mm Featured with: - Footpedal - User manual (NL) Airpresse machine
            Description :
            Capacity:
            Ø41,9 x 2,7
            R21 x 8 mm

            Featured with:
            - Footpedal
            - User manual (NL)

            Airpresse machine


        • Valk Machines BV
        • Kadijk 6
        • 8531XD Lemmer
        • Niederlande

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Notching Machine HUVEMA AKM 1.6P


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-003086 · Notching Machine

          HUVEMA - AKM 1.6P - - 2013 -

          Technical details
          plate thickness 1,6 mm︱pressure 450 MPa︱ 150 x 150 x 90° ︱table surface area 650 x 500 mm︱ 875 mm︱cutting angle - upper blade 4 °︱weight of the machine ca. 75 kg︱
          • manual notching machine with lower frame • sheet thickness: - steel 450MPa to 1.6 mm, - aluminium to 2.25 mm, - plastic to 3.0 mm, • machine for demonstration
            plate thickness 1,6 mm
            pressure 450 MPa
            150 x 150 x 90°
            table surface area 650 x 500 mm
            875 mm
            cutting angle - upper blade 4 °
            weight of the machine ca. 75 kg
            Description :
            • manual notching machine with lower frame
            • sheet thickness:
            - steel 450MPa to 1.6 mm,
            - aluminium to 2.25 mm,
            - plastic to 3.0 mm,
            • machine for demonstration


        • Feyen Maschinen GmbH
        • Gelleperstr. 10
        • 47809 Krefeld
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Notching Machine TOOLPOWER TOOLPOWER MFN 1030


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-186 · Notching Machine

          TOOLPOWER - TOOLPOWER MFN 1030 - - 2012 -

          Technical details
          gebraucht20129690Fprompt, Zwischenverkauf vChina690 €︱ 1100 mm︱ 3 mm︱ 90 °︱ 90 kg︱
          Beidseitig verstellbare Anschläge Fingerschutz Ausrüstung gemäß CE Vorschriften
            gebraucht
            2012
            9690F
            prompt, Zwischenverkauf v
            China
            690 €
            1
            100 mm
            3 mm
            90 °
            90 kg
            Description :
            Beidseitig verstellbare Anschläge
            Fingerschutz
            Ausrüstung gemäß CE Vorschriften


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Notching Machine TOOLPOWER TOOLPOWER RA 1


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-413 · Notching Machine

          TOOLPOWER - TOOLPOWER RA 1 - - 2012 -

          Technical details
          gebraucht20129403prompt, Zwischenverkauf vChina180 €︱ 11/4", 3/8", 1/2" mm︱ 4 kg︱
          operation by hand lever and eccentric 3 tube diameter combined in one assembling and welding of tubesin 90 degrees angle
            gebraucht
            2012
            9403
            prompt, Zwischenverkauf v
            China
            180 €
            1
            1/4", 3/8", 1/2" mm
            4 kg
            Description :
            operation by hand lever and eccentric
            3 tube diameter combined in one
            assembling and welding of tubesin 90 degrees angle


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Notching Machine BOSCHERT K30-120 MINI S


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9397093 · Notching Machine

          BOSCHERT - K30-120 MINI S - - 2003 -

          Technical details
          4,0 mm︱ 3,0 mm︱ 30 - 120 Grad︱blade length 150 x 150 mm︱work height max. 900 mm︱table: 1000 x 650 mm︱engine output 3,0 kW︱weight 850 kg︱range L-W-H 1250 x 1000 x 1160 mm︱
          ** Machine like NEW (!!) Furnishing: - Notching machine with angle adjustment 30° - 120° - Simple and functional "Touch Pad" control panel * Set-up stroke * Single stroke * continuous stroke - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - adjustable lift height adjustment - Waste bin - free-moving footswitch - Operation manual BOSCHERT angle adjustment: - the one-piece 30° upper knife is within one tool both with a left and directly connected to a right lower knife - once for each notch over 30° left and once on the right. - the swivel adjustment becomes pneumatic, immediately after completion of the first notch, lightning fast carried out. * Machinelink : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9397093
            4,0 mm
            3,0 mm
            30 - 120 Grad
            blade length 150 x 150 mm
            work height max. 900 mm
            table: 1000 x 650 mm
            engine output 3,0 kW
            weight 850 kg
            range L-W-H 1250 x 1000 x 1160 mm
            Description :
            ** Machine like NEW (!!)

            Furnishing:
            - Notching machine with angle adjustment 30° - 120°
            - Simple and functional "Touch Pad" control panel
            * Set-up stroke
            * Single stroke
            * continuous stroke
            - Plexiglas protection for better transparency
            - hardened knives also for cutting stainless steel
            - planed table surface
            * to avoid 'tilting' or 'slipping' of the metal sheet
            - adjustable lift height adjustment
            - Waste bin
            - free-moving footswitch
            - Operation manual

            BOSCHERT angle adjustment:
            - the one-piece 30° upper knife is within one tool both with a left and
            directly connected to a right lower knife
            - once for each notch over 30° left and once on the right.
            - the swivel adjustment becomes pneumatic, immediately after completion of the
            first notch, lightning fast carried out.

            * Machinelink :
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9397093


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Notching Machine Durma VHKM 2006


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-S343 · Notching Machine

          Durma - VHKM 2006 - - 2002 -

          Technical details
          Knife length 200 x 200 mm︱Plate thickness 6 mm︱Varaible angle 30-140 °︱Machine dimensions (lxwxh) 1.050 x 900 x 1.300 mm︱Machine weight 1.000 kg︱
            Knife length 200 x 200 mm
            Plate thickness 6 mm
            Varaible angle 30-140 °
            Machine dimensions (lxwxh) 1.050 x 900 x 1.300 mm
            Machine weight 1.000 kg
            Description :



        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Notching Machine COMACA VAR 250/6


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9397086 · Notching Machine

          COMACA - VAR 250/6 - - 2001 -

          Technical details
          plate thickness 6,0 mm ST︱plate thickness 4,0 mm VA︱table-size 1200 x 900 mm︱blade length 250 x 250 mm︱strokes per minute 45 min︱adjustable Winkel 30°-135° mm︱work height max. 1050 mm︱engine output 4,0 kW︱weight of the machine ca. 1.300 kg︱range L-W-H 1200 x 1350 x 1600 mm︱
          Furnishing: - Robust electro-hydraulic notching machine - with adjustable angle, electro-hydraulic adjustment - 2x speeds - Inching mode for adjusting the shear blades - 2x adjustable stop rulers - Machined work table, with T-slots - free-moving footswitch - Operation manual
            plate thickness 6,0 mm ST
            plate thickness 4,0 mm VA
            table-size 1200 x 900 mm
            blade length 250 x 250 mm
            strokes per minute 45 min
            adjustable Winkel 30°-135° mm
            work height max. 1050 mm
            engine output 4,0 kW
            weight of the machine ca. 1.300 kg
            range L-W-H 1200 x 1350 x 1600 mm
            Description :
            Furnishing:
            - Robust electro-hydraulic notching machine
            - with adjustable angle, electro-hydraulic adjustment
            - 2x speeds
            - Inching mode for adjusting the shear blades
            - 2x adjustable stop rulers
            - Machined work table, with T-slots
            - free-moving footswitch
            - Operation manual


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Notching Machine BOSCHERT K30-120 MINI S


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9397090 · Notching Machine

          BOSCHERT - K30-120 MINI S - - 2001 -

          Technical details
          4,0 mm︱ 3,0 mm︱ 30 - 120 Grad︱blade length 150 x 150 mm︱work height max. 900 mm︱table: 1000 x 650 mm︱engine output 3,0 kW︱weight 850 kg︱range L-W-H 1250 x 1000 x 1160 mm︱
          Furnishing: - Notching machine with angle adjustment 30° - 120° - Simple and functional "Touch Pad" control panel * Set-up stroke * Single stroke * continuous stroke - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - adjustable lift height adjustment - 2x staking stops * with movable and interchangeable stop bars - free-moving footswitch - Operation manual BOSCHERT angle adjustment: - the one-piece 30° upper knife is within one tool both with a left and directly connected to a right lower knife - once for each notch over 30°left and once on the right. - the swivel adjustment becomes pneumatic, immediately after completion of the first notch, lightning fast carried out. * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9397090
            4,0 mm
            3,0 mm
            30 - 120 Grad
            blade length 150 x 150 mm
            work height max. 900 mm
            table: 1000 x 650 mm
            engine output 3,0 kW
            weight 850 kg
            range L-W-H 1250 x 1000 x 1160 mm
            Description :
            Furnishing:
            - Notching machine with angle adjustment 30° - 120°
            - Simple and functional "Touch Pad" control panel
            * Set-up stroke
            * Single stroke
            * continuous stroke
            - Plexiglas protection for better transparency
            - hardened knives also for cutting stainless steel
            - planed table surface
            * to avoid 'tilting' or 'slipping' of the metal sheet
            - adjustable lift height adjustment
            - 2x staking stops
            * with movable and interchangeable stop bars
            - free-moving footswitch
            - Operation manual

            BOSCHERT angle adjustment:
            - the one-piece 30° upper knife is within one tool both with a left and
            directly connected to a right lower knife
            - once for each notch over 30°left and once on the right.
            - the swivel adjustment becomes pneumatic, immediately
            after completion of the first notch, lightning fast carried out.

            * Machine link :
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9397090


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          •   
          •   

          TOP Manufacturer:

          TRUMPF - AMADA -