Cut-to-length-lines
Machinelist: Cut-to-length-lines
Cut-to-length-lines
- Frech GmbH
- Werderstr. 82
- 74889 Sinsheim
- Deutschland
-
0049-7261-1011
0049-7261-63966 -
info@frech-maschinen.de
www.frech-maschinen.de
#1073-3126 · Cut-to-length-lines
ARKU - VRM 3020/21-AH 1000/K/2/MS - - 1986 -
Technical details
System consisting of: Double decoiler ARKU with Type: AH 1000 / K / 2 / MS spread manually Coilbegrenzung 3 per tape holder, front and rear Spike height 1000 mm Drive: drive with brake on each side, a drive Reel phrase: manual with electric. Query the end position Feed leveler ARKU with Type: VRM 3020/21 Indicative performance - see directional diagram Drive power: 18 kW, 3x380 V-N-PE, 50 Hz shear ARKU with Type: ATS 200 Width 200 mm x 0.60 to 2.00 mm, cutting capacity: max. 200 x 2 mm Hydraulic optional Accessories - Band page guide on the blade inlet with 2 horizontal and 4 vertical Roles, manually adjustable via handwheel - Band page guide on the strip exit with two horizontal rollers, manually handwheel adjustable - Measuring wheel at the outlet of the precision straightening machine for the measurement of feed lengths feeding accuracy ± 0.1 mm - With electric control cabinet in the remote version
- SCHMITT REINHOLD GMBH
- Obernahmerstr. 74
- 58119 Hagen-Hohenlimburg
- Deutschland
-
+49 (0)2334 4847
+49 (0)2334 4840 -
info@reinhold-schmitt.de
www.reinhold-schmitt.de
- Frech GmbH
- Werderstr. 82
- 74889 Sinsheim
- Deutschland
-
0049-7261-1011
0049-7261-63966 -
info@frech-maschinen.de
www.frech-maschinen.de
#1073-3170 · Cut-to-length-lines
BLEMA GOTHA / NN - - - -
Technical details
System consisting of: -Coil loading chair (mobile) above the floor Scissor lift version (serves 2 systems) - decoiler with pressure arm Make NN Load capacity 16.0 tons. Reel head length 1,600 mm Reel head - Ø 508 / 610 mm Spreading / pressure arm hydraulic drive power kW Operating element / control cabinet attached - Steel construction with dancer optical system - Sheet metal leveler Make WMW Erfurt Model 3.6x1600-10-20 with attached infeed table and transfer roller (infeed side) and with attached roller basket (outlet side) Number - straightening rollers 19 (10 x above / 9 x below) Number of supports 12 (6 x above / 6 x below) Target speed max. 20 m/min. Drive power (main drive) kW Motorized height adjustment (2 x) Tilt adjustment (2 x lever) Infeed – hydraulic support rollers - Sling pit equipment (entry roller basket and outlet roller frame) - Transfer frame with DUO roller unit / / tape guide / measuring wheel / - Cut-to-length shears Make NN Execution start / stop drive power kW - Stack setup Make NN Chain conveyor for pallet storage (motor driven) - Electrics - Hydraulics - Pneumatics - Documentation (partly)
- Frech GmbH
- Werderstr. 82
- 74889 Sinsheim
- Deutschland
-
0049-7261-1011
0049-7261-63966 -
info@frech-maschinen.de
www.frech-maschinen.de
#1073-3120 · Cut-to-length-lines
BOECKER & VOLKENBORN - - - 1988/2006 -
Technical details
- part length min. 200 mm - part length max. 4.800 mm line consists of: - coil lifter underfloor hydr. - decoiler - hydr. spreading - generatoric brake - safety press arm hydr. - sliding base hydr. - hydraulic station - coil opener hydr. - roller cage - loop pit table - separating adjustment - precision straightening machine manufacturer Boecker + Völkenborn - No. of straightening rolls: 15 - straightening roll- 48 mm - support rolls 3-fold - crown bow motorized - height adjustment motorized - passage width 1.100 mm - roller cage loop !! - folding tables for loop - roll feed Cattaneo CNC control - cross shear 2.000 x 4,0 mm - conveyor belt 4.000 x 1.100 mm - stacking unit - shear lifting table - electro switch cabinets - hydraulic aggregates - control desk with NC and CNC control
- Frech GmbH
- Werderstr. 82
- 74889 Sinsheim
- Deutschland
-
0049-7261-1011
0049-7261-63966 -
info@frech-maschinen.de
www.frech-maschinen.de
#1073-3109 · Cut-to-length-lines
BRONX - - - -
Technical details
Max cut length: 12 m using conveyor and stacker 6 m using stacker only Leveller No work rolls 17 Work roll dia 57 mm Work roll face 2,135 mm No back up flights 9 top 9 bottom 9 rolls per flight = 162 Back up roll dia 110 mm Bottom back up adjustment individual electromechanical Top back up adjustment Combined electromechanical Leveller drive 120 hp DC 1,500 / 1,800 rpm. Uncoiler drive 5.5 Kw Shear drive 15 hp Line Consists: 2 x floor mounted coil storage plates Coil car Twin mandrel uncoiler Snubber roll Peeler table Pinch roll unit 17 Roll fully backed up leveller with back up control. Measuring roll Shear unit Twin belt run off conveyor. 6 m long 45 deg stacker 6 m long Run off roller conveyor. Electrical control desks, control panels and remote stations. Hydraulic power unit. Documentation.
- SCHMITT REINHOLD GMBH
- Obernahmerstr. 74
- 58119 Hagen-Hohenlimburg
- Deutschland
-
+49 (0)2334 4847
+49 (0)2334 4840 -
info@reinhold-schmitt.de
www.reinhold-schmitt.de
#2008-05574 · Cut-to-length-lines
BRONX - - - -
Technical details
revised in 2004 decoiler, coil weight 15,0/20,0 t leveler, no. – leveling rolls 17, leveling roll – Ø 63 mm flying shear, manufacturer CBC, with noise insulation chamber stacking unit, manufacturer VIGANO, year of construction 2004 2 chain conveyors hydraulic electric
- Franz Teutenberg GmbH & Co KG
- Am Nordkanal 34-36
- 47877 Willich
- Deutschland
-
02154 95790
02154 9579 29 -
info@teutenberg-maschinen.com
www.teutenberg-maschinen.com
#1132-403207 · Cut-to-length-lines
BRONX - 475 - 2000 x 0,4 - 3 - - 1980 appr. -
Technical details
Max cut length: 12 m using conveyor and stacker 6 m using stacker only. Speed: 50m/min up to 2000mm length, 40m/min up to 3500m/min length Leveller drive: 120 hp DC - 1,500 / 1,800 rpm. Uncoiler drive: 5.5 Kw Shear drive: 15 hp No back up flights: 9 top & 9 bottom 9 rolls per flight = 162 Back up roll diameter: 110 mm Bottom back up adjustment: individual electromechanical Top back up adjustment: Combined electromechanical Refurbished coil car 25/09/06 refurbished Hydraulic Ram on flying shear 11/5/07 new brake discs, air bag and pressure plate fitted to Shear Brake 8/7/08 Line Consists: * 2 x floor mounted coil storage plates * Coil car * Twin mandrel uncoiler * Snubber roll * Peeler table * Pinch roll unit * 17 Roll fully backed up leveller with back up control. * Measuring roll * Shear unit * Twin belt run off conveyor. 6 m long * 45 deg stacker 6 m long * Run off roller conveyor * Electrical control desks, control panels and remote stations * Hydraulic power unit * Documentation
- Frech GmbH
- Werderstr. 82
- 74889 Sinsheim
- Deutschland
-
0049-7261-1011
0049-7261-63966 -
info@frech-maschinen.de
www.frech-maschinen.de
#1073-3057 · Cut-to-length-lines
FASTI/UNGERER - - - 1975/1988/1992 -
Technical details
Remarque: see data sheet
- Frech GmbH
- Werderstr. 82
- 74889 Sinsheim
- Deutschland
-
0049-7261-1011
0049-7261-63966 -
info@frech-maschinen.de
www.frech-maschinen.de
#1073-3096 · Cut-to-length-lines
FIMI - - - 1976 -
Technical details
The Line consist of: · Coilmagazine · Coilcar movable · Double Cone – Decoiler driven · Portal with Press Roll, Bending Roll and Pressroll – backside · Coilopener · Pre Leveller, 2 Driving Rolls, Driving Roll – Ø 340 mm 3 Levelling- and - 1 Guide Roll, Roll – Ø 180 mm · Edge Trimming Shear with Scrap Chopper Material Thickness 10 mm · Conveyor Belt for Edge Scrap · Leveller No. 1 No. of Levelling Rolls 11 Levelling Roll – Ø app. 130 mm Back Up Rolls – below 5 Times Band Thickness 5 – 13 mm · Flying Shear · Conveyor Unit with Scrap Switch · Leveller No. 2 No. of Levelling Rolls 15 Levelling Roll – Ø app. 67 mm Back Up Rolls – below 9 Times Band Thickness 1,5 – 6 mm · Stacker Unit with Driving Rolls (Infeed) for thick Sheets · Hydraulic – Equipment · Control Cabinets DC – Motors – Power: - Pre Leveller DC – Torque Motor 48 kW - Leveller I DC – Torque Motor 235 kW - Run Out Conveyor Unit inside Shear DC – Torque Motor 11 kW - Conveyor Unit after the Shear DC – Torque Motor 7,5 kW - Leveller II DC – Torque Motor 75 kW - Infeed Driver – Stacking Unit DC – Torque Motor 15 kW - Rotary Current – Power: - Hydraulic – flying Shear Rotary Current Motor 75 kW - Hydraulic – Total Supply Unit Rotary Current Motor 37,5 kW
- Frech GmbH
- Werderstr. 82
- 74889 Sinsheim
- Deutschland
-
0049-7261-1011
0049-7261-63966 -
info@frech-maschinen.de
www.frech-maschinen.de
#1073-3155 · Cut-to-length-lines
FIMI - - - 2017 -
Technical details
- Straightening machine 4 HIGH with 9 rolls, diam.rolls 80 mm, Cassette changing system
Trader Profile: Karl Günter Wirths GmbH
Contact Trader
Scharpenberger Strasse 96-98
58256 - Ennepetal
Deutschland
02333-79050">02333-79050
02333-790555
sales@wirths.net
www.wirths.net
Profile of Trader
About us - Wirths GmbH in Ennepetal
.Karl G. Wirths founded the company in 1956 as a mechanical workshop. 1961 he developed a die shop for pressing and forming dies. In that time 30 employees were working as die makers in the work shop.
Parallel Karl G. Wirths started a shop for refurbishment of machine tools. That was also the start for the machine tool business.
The die shop was closed 1972 but the machine tool business was developed.
In 1972 the first stock was erected. Up to now buildings with up to 50 t crane capacity.
In that stock we always keep approx. 250 machines.
We are not focused on a one time business but on a long term business relative with our domestic customers and customers from all places around the world.
Contact us
Karl Günter Wirths GmbH
Scharpenberger Str. 96-98
D-58256 Ennepetal / Germany
TOP Manufacturer:
HYDRO MECA - WILHELMSBURGER - HITACHI - VIGANO/RIVA -
Scharpenberger Strasse 96-98
Contact Trader
Scharpenberger Strasse 96-98
58256 - Ennepetal
Deutschland
02333-79050
02333-790555
sales@wirths.net
www.wirths.net
Contact person:
ACHTUNG: NEUE FAX Nr. 02333 790555