European network of stockholding machinery dealers

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:

          Cut-to-length-lines

          Machinelist: Cut-to-length-lines


          Cut-to-length-lines

          used Sheet metal working / shaeres / bending Cut-to-length-lines VIGANO/RIVA


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-056810 · Cut-to-length-lines

          VIGANO/RIVA - - - 2000/2001 -

          Technical details
          Material Width 2.000 mm︱Material Thickness 1,50 - (5,00)6,00 mm︱Coil Weight max. 30,0 t︱Coil Inside Diameter 580 mm︱Coil Outside Diameter 1.250/1.500 mm︱
          sheet length 580 - 6.000 mm working direction left - right otherwise according to technical specification 05.68-1.0
            Material Width 2.000 mm
            Material Thickness 1,50 - (5,00)6,00 mm
            Coil Weight max. 30,0 t
            Coil Inside Diameter 580 mm
            Coil Outside Diameter 1.250/1.500 mm
            Description :
            sheet length 580 - 6.000 mm
            working direction left - right

            otherwise according to technical specification 05.68-1.0


        • SCHMITT REINHOLD GMBH
        • Obernahmerstr. 74
        • 58119 Hagen-Hohenlimburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Cut-to-length-lines HITACHI


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19439 · Cut-to-length-lines

          HITACHI - - - 1993 -

          Technical details
          sheet width 500 - 1350 mm︱plate thickness 0,3 - 3 mm︱no. of strokes Hub/min︱Control ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Stainless steel Cut to Length Line(Flying type) - Material: stainless steel, surface treated steel -- Thickness: 0.3–3 mm (as of stainless steel) -- Width: 500-1350 mm -- Trim: 5-25 mm on one side (more than twice the plate thickness) - Material coil: internal diameter 508 mm, external diameter 600–1800 mm -- weight maximum 15 tons -- Width accuracy: 500–1350 mm plus or minus 0.2 mm (when side trimming) -- Product length: 400–6000 mm Plus/minus 0.3 mm - 6-leveler (6-hi) leveler x 2units types -- Tension: 45 to 50 kg/mm2 -- Yield point: 28 kg/mm2 - Cutting method: Cut while running (flying), numerically controlled rocking type - flying shears -- (Cutting speed) 20–40/80 m/min -- Speed 2-speed change type --- 0.3 to 1.2 mm: 20 to 80 m/min --- 0.21–3 mm: 20–40 m/min -- Slow operation: 0.8 m/min -- Conveyor speed: 20~120m/min -- Cut count: up to 150 cuts/min -- (Product piling) --- Plate width: 500–1350 mm --- No1 piler: 400 to 3100 mm (also used as a reject filer) --- No2 piler: 400–6100 mm --- Load height: up to 600mm --- Load weight: up to 4 tons Line direction: From right to left on control panel Line: Approximately 13 m x 49.050 m (Major facilities) - Coil skid - Coil car - Pay off reel and a paper winder - Coil opener - Rough Leveler - Shear - No. 1 Looper Guide - Side guide and pinch roller - Side trimmer - Scrap winder x2 - No.1 Finisher Leveler (6-hi) - No2 Finisher Leveler (6-hi) - No 2 Looper Guide - Measuring roller, feed roller and paper-off reel - Shear - Conveyor - Cart - No1/No2 piler type - Hydraulic unit: Type - Valve stand type - (Coil skid) -- V-type fixed skid -- Coil maintenance: 1 coil -- Coil weight: up to 15 tonnes -- Coil diameter: 600 to 1800 mm -urethane rubber (Coil Car) Cradle roller type Hydraulic boost Electricity transfer driving type Two guide lots hydraulic cylinder elevating type (payoff reel and paper winder) Overhang, single-mant 4-segment type Paper reel motor: DC 5.5KW 400/1600 RPM, attached to brake Paper winder: cone type, (motor DC 1.5KW, 1750 RPM) (Coil Opener) Knife edge method (Rough Leveler) 2-stage (2hi) 5-body roller leveler Pinch rollers: 160 mm × 1450 mm 2 pieces, The upper part of the pinch roller is hydraulic cylinder press-down, and the lower roller is fixed 5 workload rollers 130mm x 1450mm The upper roller of the workload roller is electrically pressed, and the lower roller is fixed 0–40/80 m/min Two-stage change 0.3 to 1.6 mmt: 80 m/min 1.7 to 1.6 mmt: 40 m/min Motor: DC 18.5 KW, 1750 RPM, Brake Attachment Pressing motor: 2 1.5KW 100RPMs with brakes (Shear) Hydraulic up cut shear Knife size: 25 mm thickness × 150 mm width × 1450 mm length (No. 1 Looper Guide) Table lift Hydraulic cylinder operation method Loop: Light Volume Control Method Roller: 70 mm diameter × 1450 mm × 6 bonds, rubber lining roller (Side guide and pinch roller) Vertical Free Roller Electrically switched type Side guide roller: 90 mm diameter × 150 mm length × 6 bones Pinch Roller: 2nd Stage (2hi) Roller: 160 mm diameter × 1450 mm length × 2 bones Upper roller: pneumatic cylinder pressure free roller Lower Roller: Fixed Drive Roller (Side trimmer) Overhang Drive Cut 0–40/80 m/min 2-stage change type 0.3 to 1.6 mmt: 80 m/min 1.7 to 1.6 mmt: 40 m/min Cutter diameter: 320 mm / 190 mm internal diameter × 20 mm thickness Roller: 320 mm external diameter × 19 mm internal diameter × 20 mm thickness Motor: DC 5.5KW 1750RPM (Scrap winder) Two machines Link Pin Gauge Type (Hydraulic Cylinder Opening and Closing Type) Motor: 2 DC 2.2KW 1450 RPM (No1 Finisher Leveler) 6-level (6-hi) 17 leveler Thickness: 1.21–3.0 mm Speed: 6 to 40/80 m/min Thickness 0.3–1.2 mm 6–80 m/min Thickness 1.21–3 mm 6–40 m/min Pinch roller: 180 mm × 1750 mm × 2 bones The upper roll is a pneumatic cylinder. The lower roll is fixed Rubber lining drive roller Work roll: 60mm x 1750mm x 17e 8 for the upper roll, 9 for the lower roll Plated abrasive roller Medium roller: 50 mm × 1750 mm × 19 pieces 9 for the upper roll, 10 for the bottom roll Backup Roller: 88 mm Diameter x 50 mm Length x 7 rows Pressing Method: Lower Roller Parallel Pressing Pressing speed: 0.25 mm/sec Pressurization: plus or minus 5 mm Motor: DC 55KW 1750 RPM Brake Attachment (No2 Finisher Leveler) 6-level (6-hi) 17 leveler Plate thickness: 0.3–1.2 mm Speed: 5 to 80 m/min Pinch roller: 180 mm × 1750 mm × 2 bones The upper roll is a pneumatic cylinder. The lower roll is fixed Rubber lining drive roller Work roll: 35mm x 1750mm x 17bon 8 for the upper roll, 9 for the lower roll Plated abrasive roller Medium Roller: 32 mm × 1750 mm × 19 pieces 9 for the upper roll, 10 for the bottom roll Backup Roller: 99 mm Diameter x 50 mm Length x 7 rows Roller bearing type Pressing Method: Lower Roller Parallel Pressing Pressing speed: 0.25 mm/sec Pressurization: plus or minus 5 mm Motor: DC 35KW 1750RPM Brake Attachment (No. 2 Looper Guide) Table lift Hydraulic cylinder operation method Loop: How to control the amount of light (amount of light) Roller: 70 mm diameter × 1450 mm × 6 bonds, rubber lining roller (Measuring roll/feed roller/paper vinyl payoff reel) Measuring roller: The upper roll is pneumatic pressing, the lower roll is fixed, the pressing amount is 30 mm Feed roller: Upper roll is pneumatic cylinder press, lower roll is fixed, press load is 40 mm Motor: DC 2.2KW 1750RPM (Shear) Fluctuating Flying shear 0.3~3mm Speed: 2 groups of 20–40/80 m/min Thickness 0.3–1.6 mm 80 m/min Tlate thickness 1.6–3 mm 40 m/min Cut count: up to 150 cuts/min Cutting length: 400–6000 mm Electric up CUT shear Cut up and down knife die via motor, reducer, pinion stand crankshaft Knife: 20 mmt × 80 mm × 1400 mm × 1 set The top knife is a straight knife, and the bottom is a V-lock knife Adjustment: Wedge Motor: DC 75KW 550RPM (Conveyor) Belt conveyor type Belt width: 1200 mm Conveyor length: 3800 mm Motor DC 5.5KW 1450RPM Brake Attachment (No. 1 No. 2 piler) No1 piler: Combined use of reject truck, air blower Combined use of side conveyor No2 piler: Combined suction conveyor and air blower Loading height: 600 mm Lift: Hydraulic lift volume 650 mm Motor: 4 1.5KW 150RPM units for side guide end stoppers 2.2 KW 1500RPM for lifters 1.5KW for cart 7.5KW for blower (Hydraulic device) 70 kg/cm2 × 100 L/min Pen pump Motor: DC 18.5 KW 1000 RPM (Supply power) AC400 V,50 Hertz 3 Phase / AC200 V,50 Hertz 3 Phase (Control power) AC 200V, 50 Hz Single Phase (Compressed air) Compressed air required: 5 kg/cm2
            sheet width 500 - 1350 mm
            plate thickness 0,3 - 3 mm
            Description :
            Stainless steel Cut to Length Line(Flying type)

            - Material: stainless steel, surface treated steel
            -- Thickness: 0.3–3 mm (as of stainless steel)
            -- Width: 500-1350 mm
            -- Trim: 5-25 mm on one side (more than twice the plate thickness)
            - Material coil: internal diameter 508 mm, external diameter 600–1800 mm
            -- weight maximum 15 tons
            -- Width accuracy: 500–1350 mm plus or minus 0.2 mm (when side trimming)
            -- Product length: 400–6000 mm Plus/minus 0.3 mm

            - 6-leveler (6-hi) leveler x 2units types
            -- Tension: 45 to 50 kg/mm2
            -- Yield point: 28 kg/mm2
            - Cutting method: Cut while running (flying), numerically controlled rocking
            type

            - flying shears
            -- (Cutting speed) 20–40/80 m/min
            -- Speed 2-speed change type
            --- 0.3 to 1.2 mm: 20 to 80 m/min
            --- 0.21–3 mm: 20–40 m/min
            -- Slow operation: 0.8 m/min
            -- Conveyor speed: 20~120m/min
            -- Cut count: up to 150 cuts/min
            -- (Product piling)
            --- Plate width: 500–1350 mm
            --- No1 piler: 400 to 3100 mm (also used as a reject filer)
            --- No2 piler: 400–6100 mm
            --- Load height: up to 600mm
            --- Load weight: up to 4 tons

            Line direction: From right to left on control panel
            Line: Approximately 13 m x 49.050 m
            (Major facilities)
            - Coil skid
            - Coil car
            - Pay off reel and a paper winder
            - Coil opener
            - Rough Leveler
            - Shear
            - No. 1 Looper Guide
            - Side guide and pinch roller
            - Side trimmer
            - Scrap winder x2
            - No.1 Finisher Leveler (6-hi)
            - No2 Finisher Leveler (6-hi)
            - No 2 Looper Guide
            - Measuring roller, feed roller and paper-off reel
            - Shear
            - Conveyor
            - Cart
            - No1/No2 piler type
            - Hydraulic unit: Type
            - Valve stand type
            - (Coil skid)
            -- V-type fixed skid
            -- Coil maintenance: 1 coil
            -- Coil weight: up to 15 tonnes
            -- Coil diameter: 600 to 1800 mm
            -urethane rubber
            (Coil Car)
            Cradle roller type
            Hydraulic boost
            Electricity transfer driving type
            Two guide lots hydraulic cylinder elevating type
            (payoff reel and paper winder)
            Overhang, single-mant 4-segment type
            Paper reel motor: DC 5.5KW 400/1600 RPM, attached to brake
            Paper winder: cone type, (motor DC 1.5KW, 1750 RPM)
            (Coil Opener)
            Knife edge method
            (Rough Leveler)
            2-stage (2hi) 5-body roller leveler
            Pinch rollers: 160 mm × 1450 mm 2 pieces,
            The upper part of the pinch roller is hydraulic cylinder press-down, and the
            lower roller is fixed
            5 workload rollers 130mm x 1450mm
            The upper roller of the workload roller is electrically pressed, and the lower
            roller is fixed
            0–40/80 m/min
            Two-stage change
            0.3 to 1.6 mmt: 80 m/min
            1.7 to 1.6 mmt: 40 m/min
            Motor: DC 18.5 KW, 1750 RPM, Brake Attachment
            Pressing motor: 2 1.5KW 100RPMs with brakes
            (Shear)
            Hydraulic up cut shear
            Knife size: 25 mm thickness × 150 mm width × 1450 mm length
            (No. 1 Looper Guide)
            Table lift
            Hydraulic cylinder operation method
            Loop: Light Volume Control Method
            Roller: 70 mm diameter × 1450 mm × 6 bonds, rubber lining roller
            (Side guide and pinch roller)
            Vertical Free Roller
            Electrically switched type
            Side guide roller: 90 mm diameter × 150 mm length × 6 bones
            Pinch Roller: 2nd Stage (2hi)
            Roller: 160 mm diameter × 1450 mm length × 2 bones
            Upper roller: pneumatic cylinder pressure free roller
            Lower Roller: Fixed Drive Roller
            (Side trimmer)
            Overhang Drive Cut
            0–40/80 m/min 2-stage change type
            0.3 to 1.6 mmt: 80 m/min
            1.7 to 1.6 mmt: 40 m/min
            Cutter diameter: 320 mm / 190 mm internal diameter × 20 mm thickness
            Roller: 320 mm external diameter × 19 mm internal diameter × 20 mm thickness
            Motor: DC 5.5KW 1750RPM
            (Scrap winder)
            Two machines
            Link Pin Gauge Type (Hydraulic Cylinder Opening and Closing Type)
            Motor: 2 DC 2.2KW 1450 RPM
            (No1 Finisher Leveler)
            6-level (6-hi) 17 leveler
            Thickness: 1.21–3.0 mm
            Speed: 6 to 40/80 m/min
            Thickness 0.3–1.2 mm 6–80 m/min
            Thickness 1.21–3 mm 6–40 m/min
            Pinch roller: 180 mm × 1750 mm × 2 bones
            The upper roll is a pneumatic cylinder. The lower roll is fixed
            Rubber lining drive roller
            Work roll: 60mm x 1750mm x 17e
            8 for the upper roll, 9 for the lower roll
            Plated abrasive roller
            Medium roller: 50 mm × 1750 mm × 19 pieces
            9 for the upper roll, 10 for the bottom roll
            Backup Roller: 88 mm Diameter x 50 mm Length x 7 rows
            Pressing Method: Lower Roller Parallel Pressing
            Pressing speed: 0.25 mm/sec
            Pressurization: plus or minus 5 mm
            Motor: DC 55KW 1750 RPM Brake Attachment
            (No2 Finisher Leveler)
            6-level (6-hi) 17 leveler
            Plate thickness: 0.3–1.2 mm
            Speed: 5 to 80 m/min
            Pinch roller: 180 mm × 1750 mm × 2 bones
            The upper roll is a pneumatic cylinder. The lower roll is fixed
            Rubber lining drive roller
            Work roll: 35mm x 1750mm x 17bon
            8 for the upper roll, 9 for the lower roll
            Plated abrasive roller
            Medium Roller: 32 mm × 1750 mm × 19 pieces
            9 for the upper roll, 10 for the bottom roll
            Backup Roller: 99 mm Diameter x 50 mm Length x 7 rows
            Roller bearing type
            Pressing Method: Lower Roller Parallel Pressing
            Pressing speed: 0.25 mm/sec
            Pressurization: plus or minus 5 mm
            Motor: DC 35KW 1750RPM Brake Attachment
            (No. 2 Looper Guide)
            Table lift
            Hydraulic cylinder operation method
            Loop: How to control the amount of light (amount of light)
            Roller: 70 mm diameter × 1450 mm × 6 bonds, rubber lining roller
            (Measuring roll/feed roller/paper vinyl payoff reel)
            Measuring roller: The upper roll is pneumatic pressing, the lower roll is
            fixed, the pressing amount is 30 mm
            Feed roller: Upper roll is pneumatic cylinder press, lower roll is fixed, press
            load is 40 mm
            Motor: DC 2.2KW 1750RPM
            (Shear)
            Fluctuating Flying shear
            0.3~3mm
            Speed: 2 groups of 20–40/80 m/min
            Thickness 0.3–1.6 mm 80 m/min
            Tlate thickness 1.6–3 mm 40 m/min
            Cut count: up to 150 cuts/min
            Cutting length: 400–6000 mm
            Electric up CUT shear
            Cut up and down knife die via motor, reducer, pinion stand crankshaft
            Knife: 20 mmt × 80 mm × 1400 mm × 1 set
            The top knife is a straight knife, and the bottom is a V-lock knife
            Adjustment: Wedge
            Motor: DC 75KW 550RPM
            (Conveyor)
            Belt conveyor type
            Belt width: 1200 mm
            Conveyor length: 3800 mm
            Motor DC 5.5KW 1450RPM Brake Attachment
            (No. 1 No. 2 piler)
            No1 piler: Combined use of reject truck, air blower
            Combined use of side conveyor
            No2 piler: Combined suction conveyor and air blower
            Loading height: 600 mm
            Lift: Hydraulic lift volume 650 mm
            Motor: 4 1.5KW 150RPM units for side guide end stoppers
            2.2 KW 1500RPM for lifters
            1.5KW for cart
            7.5KW for blower
            (Hydraulic device)
            70 kg/cm2 × 100 L/min
            Pen pump
            Motor: DC 18.5 KW 1000 RPM
            (Supply power)
            AC400 V,50 Hertz 3 Phase / AC200 V,50 Hertz 3 Phase
            (Control power)
            AC 200V, 50 Hz Single Phase
            (Compressed air)
            Compressed air required: 5 kg/cm2



        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Cut-to-length-lines WILHELMSBURGER


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-056410 · Cut-to-length-lines

          WILHELMSBURGER - - - 1975 -

          Technical details
          Material Width 1.800 mm︱Material Thickness 0,50-1,50 mm︱Coil Weight 30,0 t︱Required Space app. m︱Machine Weight app. t︱
          length tolerance ± 0,5 mm width tolerance ± 0,5 mm diagonal tolerance ± 1,0 mm line consisting of: double side decoiler leveler no. of leveling rolls 21 leveling roll diameter 35 mm flying shear magnetic conveyor table - length 10 m 2 output tables electric pneumatic hydraulic
            Material Width 1.800 mm
            Material Thickness 0,50-1,50 mm
            Coil Weight 30,0 t
            Description :
            length tolerance ± 0,5 mm
            width tolerance ± 0,5 mm
            diagonal tolerance ± 1,0 mm

            line consisting of:
            double side decoiler
            leveler
            no. of leveling rolls 21
            leveling roll diameter 35 mm
            flying shear
            magnetic conveyor table - length 10 m
            2 output tables
            electric
            pneumatic
            hydraulic


        • SCHMITT REINHOLD GMBH
        • Obernahmerstr. 74
        • 58119 Hagen-Hohenlimburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Cut-to-length-lines Hydro Meca 90L4C108H


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-M825 · Cut-to-length-lines

          Hydro Meca - 90L4C108H - - -

          Technical details
          Capacity 26/34/42/48/60 mm ø︱Machine dimensions (lxwxh) - mm︱Machine weight - kg︱
          Pipe cutting machine
            Capacity 26/34/42/48/60 mm ø
            Machine dimensions (lxwxh) - mm
            Machine weight - kg
            Description :
            Pipe cutting machine


        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact

          Hydr. pressbrake

          used Sheet metal working / shaeres / bending Hydr. pressbrake BAYKAL APHS 41200


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4021082 · Hydr. pressbrake

          BAYKAL - APHS 41200 - - NEU - DELEM DA 66T

          Technical details
          pressure 200 t︱chamfer lenght 4100 mm︱distance between columns 3550 mm︱ 410 mm︱Control DELEM DA 66T ︱table width 90 mm︱table height over floor 880 mm︱dayligth 530 mm︱piston stroke 260 mm︱ 160 mm/s︱ 10 mm/s︱return speed 110 mm/sec︱ 1000 mm︱ 160 mm︱machine weight ab. 14500 kg︱dimensions 4830 x 2240 x 2890 mm︱
            pressure 200 t
            chamfer lenght 4100 mm
            distance between columns 3550 mm
            410 mm
            Control DELEM DA 66T
            table width 90 mm
            table height over floor 880 mm
            dayligth 530 mm
            piston stroke 260 mm
            160 mm/s
            10 mm/s
            return speed 110 mm/sec
            1000 mm
            160 mm
            machine weight ab. 14500 kg
            dimensions 4830 x 2240 x 2890 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake BAYKAL APHS 41240


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4021083 · Hydr. pressbrake

          BAYKAL - APHS 41240 - - NEU - DELEM DA 66T

          Technical details
          pressure 240 t︱chamfer lenght 4100 mm︱distance between columns 3550 mm︱ 410 mm︱Control DELEM DA 66T ︱table width 90 mm︱table height over floor 880 mm︱dayligth 530 mm︱piston stroke 260 mm︱ 150 mm/s︱ 10 mm/s︱return speed 100 mm/sec︱ 1000 mm︱ 160 mm︱machine weight ab. 16000 kg︱dimensions 4900 x 1550 x 2600 mm︱
            pressure 240 t
            chamfer lenght 4100 mm
            distance between columns 3550 mm
            410 mm
            Control DELEM DA 66T
            table width 90 mm
            table height over floor 880 mm
            dayligth 530 mm
            piston stroke 260 mm
            150 mm/s
            10 mm/s
            return speed 100 mm/sec
            1000 mm
            160 mm
            machine weight ab. 16000 kg
            dimensions 4900 x 1550 x 2600 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake BAYKAL APHS 31120


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4021067 · Hydr. pressbrake

          BAYKAL - APHS 31120 - - NEU - DELEM DA 66T

          Technical details
          pressure 120 t︱chamfer lenght 3100 mm︱distance between columns 2550 mm︱Control DELEM DA 66T ︱table width 60 mm︱table height over floor 870 mm︱dayligth 540 mm︱piston stroke 260 mm︱ 160 mm/s︱ 10 mm/s︱return speed 130 mm/sec︱ 1000 mm︱ 160 mm︱machine weight ab. 9000 kg︱dimensions 3820 x 1800 x 2550 mm︱
            pressure 120 t
            chamfer lenght 3100 mm
            distance between columns 2550 mm
            Control DELEM DA 66T
            table width 60 mm
            table height over floor 870 mm
            dayligth 540 mm
            piston stroke 260 mm
            160 mm/s
            10 mm/s
            return speed 130 mm/sec
            1000 mm
            160 mm
            machine weight ab. 9000 kg
            dimensions 3820 x 1800 x 2550 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake LAG GHT 185-3000


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4020902 · Hydr. pressbrake

          LAG - GHT 185-3000 - - NEU - DELEM DA-66T

          Technical details
          pressure 185 t︱chamfer lenght 3100 mm︱distance between columns 2600 mm︱throat 500 mm︱ 300 mm︱dayligth 500 mm︱work height max. 950 mm︱working feed 0-10 mm/sec︱return speed 140 mm/sec︱engine output 18,5 kW︱control DELEM DA-66T ︱weight of the machine ca. 15000 kg︱dimensions of the machine ca. 4000x2600x3400 mm︱
            pressure 185 t
            chamfer lenght 3100 mm
            distance between columns 2600 mm
            throat 500 mm
            300 mm
            dayligth 500 mm
            work height max. 950 mm
            working feed 0-10 mm/sec
            return speed 140 mm/sec
            engine output 18,5 kW
            control DELEM DA-66T
            weight of the machine ca. 15000 kg
            dimensions of the machine ca. 4000x2600x3400 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake BAYKAL APHS 31300


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4021080 · Hydr. pressbrake

          BAYKAL - APHS 31300 - - NEU - DELEM DA 66T

          Technical details
          pressure 300 t︱chamfer lenght 3100 mm︱distance between columns 2550 mm︱Control DELEM DA 66T ︱table width 90 mm︱table height over floor 880 mm︱dayligth 530 mm︱piston stroke 260 mm︱ 130 mm/s︱ 10 mm/s︱return speed 120 mm/sec︱ 1000 mm︱ 160 mm︱machine weight ab. 15500 kg︱dimensions 3820 x 2890 x 3150 mm︱
            pressure 300 t
            chamfer lenght 3100 mm
            distance between columns 2550 mm
            Control DELEM DA 66T
            table width 90 mm
            table height over floor 880 mm
            dayligth 530 mm
            piston stroke 260 mm
            130 mm/s
            10 mm/s
            return speed 120 mm/sec
            1000 mm
            160 mm
            machine weight ab. 15500 kg
            dimensions 3820 x 2890 x 3150 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake BAYKAL APHS 26090


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4021065 · Hydr. pressbrake

          BAYKAL - APHS 26090 - - NEU - DELEM DA 66T

          Technical details
          pressure 90 t︱chamfer lenght 2600 mm︱distance between columns 2050 mm︱Control DELEM DA 66T ︱table width 60 mm︱table height over floor 860 mm︱dayligth 530 mm︱piston stroke 260 mm︱ 150 mm/s︱ 10 mm/s︱return speed 130 mm/s︱ 1000 mm︱machine weight ab. 7100 kg︱dimensions 3320 x 2220 x 2600 mm︱
            pressure 90 t
            chamfer lenght 2600 mm
            distance between columns 2050 mm
            Control DELEM DA 66T
            table width 60 mm
            table height over floor 860 mm
            dayligth 530 mm
            piston stroke 260 mm
            150 mm/s
            10 mm/s
            return speed 130 mm/s
            1000 mm
            machine weight ab. 7100 kg
            dimensions 3320 x 2220 x 2600 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake FARINA GBP PLUS 30220


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4020952 · Hydr. pressbrake

          FARINA - GBP PLUS 30220 - - Neu - CYBELEC VisiTouch 19 2D

          Technical details
          pressure 220 t︱chamfer lenght 3150 mm︱distance between columns 2600 mm︱Control CYBELEC VisiTouch 19 2D ︱dayligth 525 mm︱stroke 275 mm︱feed down 150 mm/sec︱feed bending 0-10 mm/sec︱feed up 120 mm/sec︱total power requirement 18,5 kW︱weight of the machine ca. 15.600 kg︱dimensions of the machine ca. 4250x2000x3150 mm︱
            pressure 220 t
            chamfer lenght 3150 mm
            distance between columns 2600 mm
            Control CYBELEC VisiTouch 19 2D
            dayligth 525 mm
            stroke 275 mm
            feed down 150 mm/sec
            feed bending 0-10 mm/sec
            feed up 120 mm/sec
            total power requirement 18,5 kW
            weight of the machine ca. 15.600 kg
            dimensions of the machine ca. 4250x2000x3150 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake FARINA BSA PLUS 30200


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4021135 · Hydr. pressbrake

          FARINA - BSA PLUS 30200 - - NEU -

          Technical details
          pressure 200 t︱chamfer lenght 3000 mm︱distance between columns mm︱throat mm︱distance between table / ram mm︱stroke mm︱feed down mm/sec︱feed bending mm/sec︱feed up mm/sec︱engine output kW︱weight of the machine ca. kg︱
            pressure 200 t
            chamfer lenght 3000 mm
            Description :



        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake FARINA PFO 130/30


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4021056 · Hydr. pressbrake

          FARINA - PFO 130/30 - - NEU -

          Technical details
          pressure 130 t︱chamfer lenght 3150 mm︱distance between columns 2600 mm︱engine output 15 kW︱weight of the machine ca. 10900 kg︱dimensions of the machine ca. 3990x1750x2900 mm︱
          Domestic equipments: - DELEM DA66T - 2D CNC control with LCD color display for control of 7 axes: Y1 = 1 ° cylinder Y2 = 2 ° cylinder X1 = horizontal movement of the backgauge X3 = horizontal movement of the stop finger / inclination R = vertical movement of the backgauge Z1-Z2 = lateral movement of the stop fingers - Top Dead Center - Speed ??changeover point - bending end - Deactivation point of the safety light barrier - Retreat stop - CNC controlled proportional pressure control - conical bending - USB port - DFC stator suspension compensation - Motorized back gauge model "AS" with 5 controlled axes - X-axis: 1000 mm stroke, X3-axis: 200 mm stroke - R-axis: 250 mm stroke - Hydraulic upper tool clamping make Wila, type: "Premium" NSCL-II-HC - Manual Unterwerkzeugklemmung, make Wila - Incl. Tools: sectioned, hardened and ground: Upper tool: Type: Wila BIU-021 Lower tool: Type: 4-V - Hydraulic compensation - "Platinum Package" consisting of: Active dynamic crowning Compensation of the stator suspension Sheet thickness measuring system diagnostic module - Active dynamic crowning device: Constant angle over the entire length Complete management of the crowning fully automatic Constant angle on the sides and in the middle No speed reduction The system works automatically and is almost invisible, no additional equipment required - Compensation of the stator suspension Bending sheet metal plates of different lengths without that The program parameters need to be changed. Bending of notched or perforated sheets without The program parameters need to be changed. Possibility of parts to work with reduced dimensions then test the workpiece with the actual dimensions without having to change the program parameters. No speed reduction during processing. The system works automatically and is almost invisible, no accessories required. - Sheet thickness measuring system Increased accuracy Fully automatic system Less waste Control of the material No speed reduction The system works automatically and is almost invisible, no accessories required - Soft start system "Start / Stop" to save energy - Control cabinet cooling - Hydraulic parts from Hoerbiger and Denison - Electrical parts from Rockwell Automation, Allen Bradley, Schneider, Siemens, Delem - Cabinet lighting through a LED strip - Machine lighting behind the machine with 2 LED strips - Footswitch - Laser safety system "DSP AP MSC" with height-adjustable Special arms. The system allows a speed change of only 2 mm from sheet metal and optimizes cycle times and maximum safety. - 2 front support arms (500mm): laterally movable and manually height adjustable by handwheel. - side and rear safety devices - Service key - Operating instructions and maintenance manual - Machine without oil - Machine according to standard 2006/42 / CE and CE certificate
            pressure 130 t
            chamfer lenght 3150 mm
            distance between columns 2600 mm
            engine output 15 kW
            weight of the machine ca. 10900 kg
            dimensions of the machine ca. 3990x1750x2900 mm
            Description :
            Domestic equipments:
            - DELEM DA66T - 2D CNC control with LCD color display for control
            of 7 axes:
            Y1 = 1 ° cylinder
            Y2 = 2 ° cylinder
            X1 = horizontal movement of the backgauge
            X3 = horizontal movement of the stop finger / inclination
            R = vertical movement of the backgauge
            Z1-Z2 = lateral movement of the stop fingers

            - Top Dead Center
            - Speed ??changeover point
            - bending end
            - Deactivation point of the safety light barrier
            - Retreat stop
            - CNC controlled proportional pressure control
            - conical bending
            - USB port
            - DFC stator suspension compensation
            - Motorized back gauge model "AS" with 5 controlled axes
            - X-axis: 1000 mm stroke, X3-axis: 200 mm stroke
            - R-axis: 250 mm stroke
            - Hydraulic upper tool clamping make Wila, type: "Premium" NSCL-II-HC
            - Manual Unterwerkzeugklemmung, make Wila
            - Incl. Tools: sectioned, hardened and ground:
            Upper tool: Type: Wila BIU-021
            Lower tool: Type: 4-V
            - Hydraulic compensation

            - "Platinum Package" consisting of:
            Active dynamic crowning
            Compensation of the stator suspension
            Sheet thickness measuring system
            diagnostic module

            - Active dynamic crowning device:
            Constant angle over the entire length
            Complete management of the crowning
            fully automatic
            Constant angle on the sides and in the middle
            No speed reduction
            The system works automatically and is almost invisible,
            no additional equipment required

            - Compensation of the stator suspension
            Bending sheet metal plates of different lengths without that
            The program parameters need to be changed.
            Bending of notched or perforated sheets without
            The program parameters need to be changed.
            Possibility of parts to work with reduced dimensions
            then test the workpiece with the actual dimensions
            without having to change the program parameters.
            No speed reduction during processing.
            The system works automatically and is almost invisible, no accessories
            required.


            - Sheet thickness measuring system
            Increased accuracy
            Fully automatic system
            Less waste
            Control of the material
            No speed reduction
            The system works automatically and is almost invisible, no accessories
            required

            - Soft start system "Start / Stop" to save energy
            - Control cabinet cooling
            - Hydraulic parts from Hoerbiger and Denison
            - Electrical parts from Rockwell Automation, Allen Bradley, Schneider,
            Siemens, Delem
            - Cabinet lighting through a LED strip
            - Machine lighting behind the machine with 2 LED strips
            - Footswitch
            - Laser safety system "DSP AP MSC" with height-adjustable
            Special arms. The system allows a speed change of only 2 mm
            from sheet metal and optimizes cycle times and maximum safety.
            - 2 front support arms (500mm): laterally movable and manually
            height adjustable by handwheel.
            - side and rear safety devices
            - Service key
            - Operating instructions and maintenance manual
            - Machine without oil
            - Machine according to standard 2006/42 / CE and CE certificate


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake FARINA BSA PLUS 40320


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4021137 · Hydr. pressbrake

          FARINA - BSA PLUS 40320 - - NEU -

          Technical details
          pressure 320 t︱chamfer lenght 4000 mm︱stroke 350 mm︱arm length 400 mm︱
            pressure 320 t
            chamfer lenght 4000 mm
            stroke 350 mm
            arm length 400 mm
            Description :



        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake BAYKAL APHS 31160


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4021049 · Hydr. pressbrake

          BAYKAL - APHS 31160 - - NEU - CYBELEC VisiTouch 19-2D

          Technical details
          pressure 160 t︱chamfer lenght 3100 mm︱distance between columns 2550 mm︱throat 410 mm︱table width 60 mm︱table height 870 mm︱dayligth 530 mm︱piston stroke 260 mm︱ 200 mm/sec︱return speed 160 mm/sec︱ 1000 mm︱ 160 mm︱engine output 15 kW︱quantity of oil 180 l︱Control CYBELEC VisiTouch 19-2D ︱weight of the machine ca. 10.000 kg︱dimensions of the machine ca. 4100x1800x2700 mm︱
            pressure 160 t
            chamfer lenght 3100 mm
            distance between columns 2550 mm
            throat 410 mm
            table width 60 mm
            table height 870 mm
            dayligth 530 mm
            piston stroke 260 mm
            200 mm/sec
            return speed 160 mm/sec
            1000 mm
            160 mm
            engine output 15 kW
            quantity of oil 180 l
            Control CYBELEC VisiTouch 19-2D
            weight of the machine ca. 10.000 kg
            dimensions of the machine ca. 4100x1800x2700 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake BAYKAL APHS 41160


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4021081 · Hydr. pressbrake

          BAYKAL - APHS 41160 - - NEU - DELEM DA 66T

          Technical details
          pressure 160 t︱chamfer lenght 4100 mm︱distance between columns 3550 mm︱ 410 mm︱Control DELEM DA 66T ︱table width 60 mm︱table height over floor 880 mm︱dayligth 530 mm︱piston stroke 260 mm︱ 170 mm/s︱ 10 mm/s︱return speed 120 mm/sec︱ 1000 mm︱ 160 mm︱machine weight ab. 12500 kg︱dimensions 4830 x 2240 x 2890 mm︱
            pressure 160 t
            chamfer lenght 4100 mm
            distance between columns 3550 mm
            410 mm
            Control DELEM DA 66T
            table width 60 mm
            table height over floor 880 mm
            dayligth 530 mm
            piston stroke 260 mm
            170 mm/s
            10 mm/s
            return speed 120 mm/sec
            1000 mm
            160 mm
            machine weight ab. 12500 kg
            dimensions 4830 x 2240 x 2890 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake PLACKE EQPB-2 BabyPress 6,2t x 285 mm


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2300004 · Hydr. pressbrake

          PLACKE - EQPB-2 BabyPress 6,2t x 285 mm - - NEU - DELEM DA 41T

          Technical details
          pressure 6,2 t︱chamfer lenght 285 mm mm︱distance between columns 230 mm︱dayligth 215 mm︱throat 70 mm︱stroke 100 mm︱working feed 9,8 mm/sec︱return speed 50 mm/sec︱quantity of oil 10 l︱Control DELEM DA 41T ︱total power requirement 0,7 kW︱weight of the machine ca. 250 kg︱dimensions 900 x 1300 x 550 mm︱
          • Basic version as a C-frame • Compact table model • Ideal for prototypes and small series • Very short setup time • Functionally simple • Wide range of applications • Low noise level • Low energy consumption • Easy handling including special equipment: - CNC control DELEM DA 41T
            pressure 6,2 t
            chamfer lenght 285 mm mm
            distance between columns 230 mm
            dayligth 215 mm
            throat 70 mm
            stroke 100 mm
            working feed 9,8 mm/sec
            return speed 50 mm/sec
            quantity of oil 10 l
            Control DELEM DA 41T
            total power requirement 0,7 kW
            weight of the machine ca. 250 kg
            dimensions 900 x 1300 x 550 mm
            Description :
            • Basic version as a C-frame
            • Compact table model
            • Ideal for prototypes and small series
            • Very short setup time
            • Functionally simple
            • Wide range of applications
            • Low noise level
            • Low energy consumption
            • Easy handling

            including special equipment:
            - CNC control DELEM DA 41T


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake ERMAK POWER BEND FALCON 1270x60S


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2300003 · Hydr. pressbrake

          ERMAK - POWER BEND FALCON 1270x60S - - NEU - DELEM DA 58 T

          Technical details
          pressure 60 t︱chamfer lenght 1270 mm︱distance between columns 1000 mm︱dayligth 530 mm︱throat 410 mm︱stroke 275 mm︱working feed 10,0 mm/sec︱return speed 165,0 mm/sec︱work height max. 900 mm︱quantity of oil 150 l︱Control DELEM DA 58 T ︱total power requirement 7,5 kW︱weight of the machine ca. 4320 kg︱dimensions 2,25 x 1,96 x 2,75 m︱
          -------------------------------------------------- --------- CNC press brake with special equipment * Version "ERGO" - knee room for the operator * flexible articulated arm mount for the controller * increased installation height * increased cylinder stroke * as well as increased bending beam speeds -------------------------------------------------- --------- Furnishing: - DELEM CNC control model DA-58T graphic/touch screen * 2D graphical programming * 15" TFT color screen with high resolution * Bending sequence calculation * Product programming and real size display * USB interface - Motorized backgauge with R-axis, on ball screws - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes : Y1 - Y2 - X - R - Deer foot upper tool with PS 135.85-R08, system "A" with quick-change clamp - additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm mount - BOSCH/HOERBIGER hydr. components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protection device v.d. machine - Swiveling control panel, mounted on the left - Front, foldable sheet metal support - Double foot control - CE mark / declaration of conformity - Operating manual: Machine and control in German - Safety manual : press brakes
            pressure 60 t
            chamfer lenght 1270 mm
            distance between columns 1000 mm
            dayligth 530 mm
            throat 410 mm
            stroke 275 mm
            working feed 10,0 mm/sec
            return speed 165,0 mm/sec
            work height max. 900 mm
            quantity of oil 150 l
            Control DELEM DA 58 T
            total power requirement 7,5 kW
            weight of the machine ca. 4320 kg
            dimensions 2,25 x 1,96 x 2,75 m
            Description :
            -------------------------------------------------- ---------
            CNC press brake with special equipment
            * Version "ERGO" - knee room for the operator
            * flexible articulated arm mount for the controller
            * increased installation height
            * increased cylinder stroke
            * as well as increased bending beam speeds
            -------------------------------------------------- ---------

            Furnishing:
            - DELEM CNC control model DA-58T graphic/touch screen
            * 2D graphical programming
            * 15" TFT color screen with high resolution
            * Bending sequence calculation
            * Product programming and real size display
            * USB interface
            - Motorized backgauge with R-axis, on ball screws
            - X = 800 mm R = 250 mm with 2 stop fingers
            - controlled axes : Y1 - Y2 - X - R
            - Deer foot upper tool with PS 135.85-R08, system "A" with quick-change clamp
            - additional crowning device in the tool holder of the upper tool
            - 4V universal die block M 460 R with die shoe 60 mm mount
            - BOSCH/HOERBIGER hydr. components
            - SIEMENS electrical system
            - LEUZE light barrier behind the machine
            - FIESSLER AKAS laser with FPSC protection device v.d. machine
            - Swiveling control panel, mounted on the left
            - Front, foldable sheet metal support
            - Double foot control
            - CE mark / declaration of conformity
            - Operating manual: Machine and control in German
            - Safety manual : press brakes


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake ERMAK POWER BEND FALCON 3.135


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2300001 · Hydr. pressbrake

          ERMAK - POWER BEND FALCON 3.135 - - NEU - DELEM DA 58 T

          Technical details
          pressure 135 t︱chamfer lenght 3100 mm︱distance between columns 2600 mm︱dayligth 550 mm︱throat 410 mm︱stroke 275 mm︱working feed 10,0 mm/sec︱return speed 120,0 mm/sec︱work height max. 900 mm︱quantity of oil 200 l︱Control DELEM DA 58 T ︱total power requirement 11 kW︱weight of the machine ca. 8650 kg︱dimensions 4250 x 2050 x 2800 mm︱
          -------------------------------------------------- --------- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds -------------------------------------------------- --------- Furnishing: - DELEM CNC control model DA-66T graphic/touch screen * 2D graphical programming * 17" TFT color screen with high resolution * Bending sequence calculation * Product programming and real size display * USB interface * intuitive, graphical entry of profiles * Automatic calculation of features: tool safety zones, Press force, bending tolerance, crown setting, stretched Length, embossing force, flattening, automatic rounding calculation * Radius programming * Graphic tool and product library * Collision monitoring * 3D visualization * 1GB memory - Motorized backgauge with R-axis, on ball screws - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Deer foot upper tool with PS 135.85-R08, system "A" with quick-change clamp - additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm mount - BOSCH/HOERBIGER hydr. components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protection device v.d. machine - Swiveling control panel, mounted on the left - 2x front support arms "Sliding-System", with T-slot and cam - 1x double foot control - CE mark / declaration of conformity - Operating manual: Machine and control in German - Safety manual : press brakes
            pressure 135 t
            chamfer lenght 3100 mm
            distance between columns 2600 mm
            dayligth 550 mm
            throat 410 mm
            stroke 275 mm
            working feed 10,0 mm/sec
            return speed 120,0 mm/sec
            work height max. 900 mm
            quantity of oil 200 l
            Control DELEM DA 58 T
            total power requirement 11 kW
            weight of the machine ca. 8650 kg
            dimensions 4250 x 2050 x 2800 mm
            Description :
            -------------------------------------------------- ---------
            Press brake with special equipment
            * increased installation height
            * increased cylinder stroke
            * as well as increased bending beam speeds
            -------------------------------------------------- ---------
            Furnishing:
            - DELEM CNC control model DA-66T graphic/touch screen
            * 2D graphical programming
            * 17" TFT color screen with high resolution
            * Bending sequence calculation
            * Product programming and real size display
            * USB interface
            * intuitive, graphical entry of profiles
            * Automatic calculation of features: tool safety zones,
            Press force, bending tolerance, crown setting, stretched
            Length, embossing force, flattening, automatic rounding calculation
            * Radius programming
            * Graphic tool and product library
            * Collision monitoring
            * 3D visualization
            * 1GB memory
            - Motorized backgauge with R-axis, on ball screws
            - X = 800 mm R = 250 mm with 2 stop fingers
            - controlled axes Y1 - Y2 - X - R - C (crowning)
            - electr. Crowning controlled by CNC
            - Deer foot upper tool with PS 135.85-R08, system "A" with quick-change clamp
            - additional crowning device in the tool holder of the upper tool
            - 4V universal die block M 460 R with die shoe 60 mm mount
            - BOSCH/HOERBIGER hydr. components
            - SIEMENS electrical system
            - LEUZE light barrier behind the machine
            - FIESSLER AKAS laser with FPSC protection device v.d. machine
            - Swiveling control panel, mounted on the left
            - 2x front support arms "Sliding-System", with T-slot and cam
            - 1x double foot control
            - CE mark / declaration of conformity
            - Operating manual: Machine and control in German
            - Safety manual : press brakes


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake BAYKAL APHS 31240


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4021079 · Hydr. pressbrake

          BAYKAL - APHS 31240 - - NEU - DELEM DA 66T

          Technical details
          pressure 240 t︱chamfer lenght 3100 mm︱distance between columns 2550 mm︱Control DELEM DA 66T ︱table width 90 mm︱table height over floor 880 mm︱dayligth 530 mm︱piston stroke 260 mm︱ 130 mm/s︱ 10 mm/s︱return speed 120 mm/sec︱ 1000 mm︱ 160 mm︱machine weight ab. 12500 kg︱dimensions 4100 x 1800 x 2800 mm︱
            pressure 240 t
            chamfer lenght 3100 mm
            distance between columns 2550 mm
            Control DELEM DA 66T
            table width 90 mm
            table height over floor 880 mm
            dayligth 530 mm
            piston stroke 260 mm
            130 mm/s
            10 mm/s
            return speed 120 mm/sec
            1000 mm
            160 mm
            machine weight ab. 12500 kg
            dimensions 4100 x 1800 x 2800 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake BAYKAL APHS 31200


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4021068 · Hydr. pressbrake

          BAYKAL - APHS 31200 - - NEU - DELEM DA 66T

          Technical details
          pressure 200 t︱chamfer lenght 3100 mm︱distance between columns 2550 mm︱Control DELEM DA 66T ︱table width 90 mm︱table height over floor 880 mm︱dayligth 530 mm︱piston stroke 260 mm︱ 150 mm/s︱ 10 mm/s︱return speed 130 mm/sec︱ 1000 mm︱ 160 mm︱machine weight ab. 11500 kg︱dimensions 3820 x 1800 x 2700 mm︱
            pressure 200 t
            chamfer lenght 3100 mm
            distance between columns 2550 mm
            Control DELEM DA 66T
            table width 90 mm
            table height over floor 880 mm
            dayligth 530 mm
            piston stroke 260 mm
            150 mm/s
            10 mm/s
            return speed 130 mm/sec
            1000 mm
            160 mm
            machine weight ab. 11500 kg
            dimensions 3820 x 1800 x 2700 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake FARINA PFO 130/30


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4021102 · Hydr. pressbrake

          FARINA - PFO 130/30 - - NEU - CYBELEC VisiTouch

          Technical details
          pressure 130 t︱chamfer lenght 3150 mm︱distance between columns 2600 mm︱engine output 15 kW︱control CYBELEC VisiTouch ︱weight of the machine ca. 10900 kg︱dimensions of the machine ca. 3990x1750x2900 mm︱
          Domestic equipments: - DELEM DA66T - 2D CNC control with LCD color display for control of 7 axes: Y1 = 1 ° cylinder Y2 = 2 ° cylinder X1 = horizontal movement of the backgauge X3 = horizontal movement of the stop finger / inclination R = vertical movement of the backgauge Z1-Z2 = lateral movement of the stop fingers - Top Dead Center - Speed ??changeover point - bending end - Deactivation point of the safety light barrier - Retreat stop - CNC controlled proportional pressure control - conical bending - USB port - DFC stator suspension compensation - Motorized back gauge model "AS" with 5 controlled axes - X-axis: 1000 mm stroke, X3-axis: 200 mm stroke - R-axis: 250 mm stroke - Hydraulic upper tool clamping make Wila, type: "Premium" NSCL-II-HC - Manual Unterwerkzeugklemmung, make Wila - Incl. Tools: sectioned, hardened and ground: Upper tool: Type: Wila BIU-021 Lower tool: Type: 4-V - Hydraulic compensation - "Platinum Package" consisting of: Active dynamic crowning Compensation of the stator suspension Sheet thickness measuring system diagnostic module - Active dynamic crowning device: Constant angle over the entire length Complete management of the crowning fully automatic Constant angle on the sides and in the middle No speed reduction The system works automatically and is almost invisible, no additional equipment required - Compensation of the stator suspension Bending sheet metal plates of different lengths without that The program parameters need to be changed. Bending of notched or perforated sheets without The program parameters need to be changed. Possibility of parts to work with reduced dimensions then test the workpiece with the actual dimensions without having to change the program parameters. No speed reduction during processing. The system works automatically and is almost invisible, no accessories required. - Sheet thickness measuring system Increased accuracy Fully automatic system Less waste Control of the material No speed reduction The system works automatically and is almost invisible, no accessories required - Soft start system "Start / Stop" to save energy - Control cabinet cooling - Hydraulic parts from Hoerbiger and Denison - Electrical parts from Rockwell Automation, Allen Bradley, Schneider, Siemens, Delem - Cabinet lighting through a LED strip - Machine lighting behind the machine with 2 LED strips - Footswitch - Laser safety system "DSP AP MSC" with height-adjustable Special arms. The system allows a speed change of only 2 mm from sheet metal and optimizes cycle times and maximum safety. - 2 front support arms (500mm): laterally movable and manually height adjustable by handwheel. - side and rear safety devices - Service key - Operating instructions and maintenance manual - Machine without oil - Machine according to standard 2006/42 / CE and CE certificate
            pressure 130 t
            chamfer lenght 3150 mm
            distance between columns 2600 mm
            engine output 15 kW
            control CYBELEC VisiTouch
            weight of the machine ca. 10900 kg
            dimensions of the machine ca. 3990x1750x2900 mm
            Description :
            Domestic equipments:
            - DELEM DA66T - 2D CNC control with LCD color display for control
            of 7 axes:
            Y1 = 1 ° cylinder
            Y2 = 2 ° cylinder
            X1 = horizontal movement of the backgauge
            X3 = horizontal movement of the stop finger / inclination
            R = vertical movement of the backgauge
            Z1-Z2 = lateral movement of the stop fingers

            - Top Dead Center
            - Speed ??changeover point
            - bending end
            - Deactivation point of the safety light barrier
            - Retreat stop
            - CNC controlled proportional pressure control
            - conical bending
            - USB port
            - DFC stator suspension compensation
            - Motorized back gauge model "AS" with 5 controlled axes
            - X-axis: 1000 mm stroke, X3-axis: 200 mm stroke
            - R-axis: 250 mm stroke
            - Hydraulic upper tool clamping make Wila, type: "Premium" NSCL-II-HC
            - Manual Unterwerkzeugklemmung, make Wila
            - Incl. Tools: sectioned, hardened and ground:
            Upper tool: Type: Wila BIU-021
            Lower tool: Type: 4-V
            - Hydraulic compensation

            - "Platinum Package" consisting of:
            Active dynamic crowning
            Compensation of the stator suspension
            Sheet thickness measuring system
            diagnostic module

            - Active dynamic crowning device:
            Constant angle over the entire length
            Complete management of the crowning
            fully automatic
            Constant angle on the sides and in the middle
            No speed reduction
            The system works automatically and is almost invisible,
            no additional equipment required

            - Compensation of the stator suspension
            Bending sheet metal plates of different lengths without that
            The program parameters need to be changed.
            Bending of notched or perforated sheets without
            The program parameters need to be changed.
            Possibility of parts to work with reduced dimensions
            then test the workpiece with the actual dimensions
            without having to change the program parameters.
            No speed reduction during processing.
            The system works automatically and is almost invisible, no accessories
            required.


            - Sheet thickness measuring system
            Increased accuracy
            Fully automatic system
            Less waste
            Control of the material
            No speed reduction
            The system works automatically and is almost invisible, no accessories
            required

            - Soft start system "Start / Stop" to save energy
            - Control cabinet cooling
            - Hydraulic parts from Hoerbiger and Denison
            - Electrical parts from Rockwell Automation, Allen Bradley, Schneider,
            Siemens, Delem
            - Cabinet lighting through a LED strip
            - Machine lighting behind the machine with 2 LED strips
            - Footswitch
            - Laser safety system "DSP AP MSC" with height-adjustable
            Special arms. The system allows a speed change of only 2 mm
            from sheet metal and optimizes cycle times and maximum safety.
            - 2 front support arms (500mm): laterally movable and manually
            height adjustable by handwheel.
            - side and rear safety devices
            - Service key
            - Operating instructions and maintenance manual
            - Machine without oil
            - Machine according to standard 2006/42 / CE and CE certificate


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake BAYKAL APHS 21060


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4021063 · Hydr. pressbrake

          BAYKAL - APHS 21060 - - NEU - DELEM DA 66T

          Technical details
          pressure 60 t︱chamfer lenght 2100 mm︱distance between columns 1600 mm︱Control DELEM DA 66T ︱table width 60 mm︱table height over floor 860 mm︱dayligth 475 mm︱piston stroke max. 210 mm︱ 150 mm/s︱ 10 mm/s︱return speed 130 mm/sec︱ 1000 mm︱machine weight ab. 5200 kg︱dimensions 2100 x 1540 x 2350 mm︱
            pressure 60 t
            chamfer lenght 2100 mm
            distance between columns 1600 mm
            Control DELEM DA 66T
            table width 60 mm
            table height over floor 860 mm
            dayligth 475 mm
            piston stroke max. 210 mm
            150 mm/s
            10 mm/s
            return speed 130 mm/sec
            1000 mm
            machine weight ab. 5200 kg
            dimensions 2100 x 1540 x 2350 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake ERMAK SPEED BEND PRO 4.220


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2300006 · Hydr. pressbrake

          ERMAK - SPEED BEND PRO 4.220 - - NEU - DELEM DA 66T

          Technical details
          pressure 220 t︱chamfer lenght 4100 mm︱distance between columns 3600 mm︱dayligth 550 mm︱throat 410 mm︱stroke 275 mm︱working feed 10,0 mm/sec︱return speed 185 mm/sec︱quantity of oil 300 l︱Control DELEM DA 66T ︱total power requirement 18,5 kW︱weight of the machine ca. 13900 kg︱dimensions 5150 x 2250 x 3000 mm︱
          HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke increased projection -------------------------------------------------- ------- Furnishing: - DELEM CNC control model DA 66T - swiveling touch screen control unit - 7 controlled axes : Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split deer foot upper tool Roleri 135.85.R08, "System A" - with additional crowning of the upper wedge - Universal die block - LEUZE light barrier behind d. machine - BOSCH/HOERBIGER hydr. components - SIEMENS - electrical system - FIESSLER AKAS laser protection device in front of the machine (incl. FPSC) - 2 front support arms with SLIDING system (slide bearing) - Double foot control - CE mark / declaration of conformity - Operating manual: Machine and control in German - Safety manual : press brakes Special equipment included: - electric central lubrication
            pressure 220 t
            chamfer lenght 4100 mm
            distance between columns 3600 mm
            dayligth 550 mm
            throat 410 mm
            stroke 275 mm
            working feed 10,0 mm/sec
            return speed 185 mm/sec
            quantity of oil 300 l
            Control DELEM DA 66T
            total power requirement 18,5 kW
            weight of the machine ca. 13900 kg
            dimensions 5150 x 2250 x 3000 mm
            Description :
            HIGH-SPEED hydraulic press brake with
            increased installation height
            increased cylinder stroke
            increased projection
            -------------------------------------------------- -------
            Furnishing:
            - DELEM CNC control model DA 66T
            - swiveling touch screen control unit
            - 7 controlled axes : Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning
            - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm
            - on ball screws
            - controlled electr. Stop fingers Z1 + Z2
            - split deer foot upper tool Roleri 135.85.R08, "System A"
            - with additional crowning of the upper wedge
            - Universal die block
            - LEUZE light barrier behind d. machine
            - BOSCH/HOERBIGER hydr. components
            - SIEMENS - electrical system
            - FIESSLER AKAS laser protection device in front of the machine (incl. FPSC)
            - 2 front support arms with SLIDING system (slide bearing)
            - Double foot control
            - CE mark / declaration of conformity
            - Operating manual: Machine and control in German
            - Safety manual : press brakes
            Special equipment included:
            - electric central lubrication


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •