---

6 - roll tube straightening machine Fabr.Mannesmann - Meer Type. KR 35 - 3/3 Year. 1975 Work range: 6 - 35 (37) mm Ø Drive. 2 x 5.5kW, 50Hz, 400 / 690V In 2003, cabinet and frequency controlled drives renewed. reachable straightening accuracy: 1 mm per 1 meter tube length

---

Adjustageline for Tube straighteners, but WITHOUT Straightening machine Working range: 12 - 85 mm up to 8 meter tube length The line consists of: - entry rack with separation - inlet channel - outlet channel - finished table - hydraulic station - electrical cabinet

---

6 - roll straightening machine for bars and tubes Construction: KOCKS Type: RM 133 New-in: approx. 1980ties Condition: good Working range Ø: 21,30 – 133,00 mm Wall thickness: 2,00 – 8,80 mm Straightening speed: 24 - 240 m/min. Material lengths: 8 - 16 (17) Meter Rolls: 3 upper and 3 lower rolls, all driven Roll basic Ø: min.: 260 mm, max. 280 mm Adjusting angle: 36,0 – 43,5 degrees Working direction: from right to left Main drive: 2 direct current motors (air/water cooling), with converter 8,3 – 83/83 kW, 78 – 780/1960 Upm, 400 V, 50 Hz Scope of supply: - Entry channel - Drive-in duo - Main machine body with drive motors and 2 spur gears, 3 steps: 45,4 – 126,2; 88,2 – 244,9; 179,1 – 497,5 Rpm - Extraction duo - Exit channel with excavator - Hydraulik valve stand - Control elements (2 power parts for drive motors, parts for control cabinet) - Div. spares and accessories, like e.g.: 12 straightening rolls, drive rolls, spare control unit, div. bearings, hoses, valves, PVC jaws, shaft for straightening rolls, spindle, hydraulic cylinder, axial piston motor, heat exchanger, hydraulic motor, worm gear motor Total line length: about 42 meters total weight: approx. 45 to. More photos: are available upon request

---

9 - ROLL STRAIGHTENING MACHINE Constr. MONTBARD Type DMS 90 Year 1969 / 1996 No. of straightening rolls: 3 lower, driven 6 upper, non-driven, the 1st upper entry straightening roll "loops" upwards in order to protect the material Working range: 10 - 96 (120) mm Ø Wall thickness: 1 - 8 mm Tube length: 5 - 13 m Processed material: steel tubes up to max. 850 N/mm² reached straightness: 0,5 mm/m Working direction: from legt to right Control system SIEMENS S 5 The line consists of: ============== - Entry loading device with finger separation, constr.: BÜLTMANN, year 1996 - Main machine body with drive (transfer gear box) - Material exit A V I D E O, which shows the line in productio with material, can be seen on our website. Total weight: approx. 31 to.

---

10 - Roll Straightening machine for bars and tubes Condition: very good - the line was regulary maintained and serviced Working range: bars 35 - 120 mm dia. (tensile strength 120 kg/mm², yield strength 60 kg/mm²) tubes 35 - 170 mm dia. Roll design: 3 lower straightening rolls, driven 7 upper counter pressure rolls, non-driven Material length: up to 8 meter Straightening speed: 20, 30 and 40 m/min. Main motor 3 x 32 / 42 / 50 kW, 750 / 1000 / 1500 rpm, 500 V, 50 Hz The complete line consists of: - Separating device - Entry roller channel - Main machine boday with gears and motors - Exit roller channel - Material deposite collecting rack - Operating panel - Electrical cabinet - incl. numerous spares, accessories (appr. 50 to.) partially new, such as complete spare gear, spare straightening rolls etc. VIDEO / additional photo PDF: are available upon demand