Plate Shear - Mechanical

sheet width 2550 mm︱plate thickness 4,0 mm︱distance between columns 2600 mm︱back stop - adjustable 750 mm︱no. of strokes 42 Hub/min︱cutting angle 1°30 ︱table width 450 mm︱table height 800 mm︱total power requirement 7,5 kW︱weight of the machine ca. 3230 kg︱dimensions of the machine ca. 3200 x 2300 x 1350 mm︱

---

** Current new price with special accessories ~ 33.000 euros ** from a maintenance workshop / good condition (!!) Furnishing: - robust / powerful mechanical guillotine shears - electric backgauge, with ball screws - with DURMA NC control - model D-Touch 7 * Control unit with touchscreen function * 128 MB internal memory (programming possible) * Multilingual (English, Turkish, German) * INCH/metric conversion - manual cutting gap adjustment, from the front * analogue display of the material thickness - 1x extra long side stop 2.000 mm, with support foot & T-slot - 2x support arms - Ball casters in the support table - free-moving footswitch - rear protective device (light barrier) - original operating instructions (machine + control) Special accessories included : - Pneumatic sheet metal holding device, for thin sheet metal blanks - 1x extra long side stop, with support foot - 1x box with spare knife

sheet width 2100 mm︱plate thickness 3.0 mm︱thickness at "Niro-steel" 1.5 mm︱blade length 2110 mm︱no. of strokes 34 Hub/min︱back stop - adjustable 1000 mm︱cutting angle 1.5 °︱work height max. 880 mm︱Control DIGI ︱engine output 6.25 kW︱weight 2650 kg︱range L-W-H 2750 x 2350 x 1550 mm︱

---

** Machine from a maintenance workshop ** maintained condition (!!) Furnishing: - robust electro-mechanical sheet metal shears - Machine body in a closed design as an all-steel welded construction - heavy / robust drive motor (5.5 KW) - electro-motorized backgauge, including digital control unit * Adjustment range max. 1.000 mm * Input of target / actual value possible - manual cutting gap adjustment, adjustable from the front - 1x table side stop - Ball rollers in the support table - 1x freely movable foot switch, including EMERGENCY stop button - front finger protection - original instruction manual * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325336

sheet width 2030 mm︱plate thickness 4,0 mm︱thickness at "Niro-steel" 2,5 mm︱no. of strokes 34 Hub/min︱cutting angle 2,5 Grad︱table height 820 mm︱distance between columns 2340 mm︱Control POS 100 ︱back stop - adjustable max. 750 mm︱engine output 6,8 kW︱weight of the machine ca. 2860 kg.︱range L-W-H 2870 x 2070 x 1400 mm︱

---

** Machine from a maintenance workshop ** very well maintained condition - hardly used (!!) Furnishing: - robust / motorized swing-cut guillotine shears - Shatterproof, torsion-free steel welded construction - compact and clear mechanical design - Electric back gauge, with SCHRÖDER POS 100 NC control * Digital position display from the backgauge * adjustable from the front right * with target/actual value input * Continuous adjustment over the entire travel range * Protection of limit values with limit switches * 9-fold programming possible - "Duo-Cut" drive with two dynamic, powerful geared motors - Support table with recessed grips - Hold-down bar with hard rubber strip - All-steel knife, double-edged - 1x side stop, with T-slot and mm scale - 2x extended sheet metal support arms, with T-slot and mm scale - Selector switch for single and continuous stroke - freely movable foot switch - Rear safety device - original operating instructions + CD Rom **Special accessories included: - pneumatically controlled sheet metal holding device for thin sheet metal cuts * Sheet metal removal / sheet metal slide to the front (operator side) - 1x wooden box with replacement scissor blades * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325303 * Machinevideo : https://www.youtube.com/watch?v=5w-LdgCg6J8

sheet width 1050 mm︱plate thickness 3,0 mm ST︱cutting angle 2,0 °︱stroke max. 38 p. Min.︱total power requirement 5,5 kW︱weight of the machine ca. 1690 kg.︱range L-W-H 1800 x 1800 x 1250 mm︱

---

** from a maintenance workshop (!!) Furnishing: - Motorized / electric guillotine shears - manual backgauge, adjustment by hand crank * Travel range max. 700 mm * with analogue position display (scale) * manual adjustment from behind - rear protection - rear sheet metal slide - free-moving footswitch

sheet width 2050 mm︱plate thickness 2,5 mm︱thickness at "Niro-steel" 2,0 mm︱no. of strokes 75 Hub/min︱cutting angle 2°30 °︱engine output 3,0 kW︱table height 810 mm︱weight of the machine ca. 2400 kg.︱range L-W-H 2600 x 1385 x 1600 mm︱

---

Furnishing: - electrical backgauge, with analog display - Stop can be folded up - for longer sheet metal strips - welded monoblock steel construction - Special steel knives that can be used on both sides, hardened - Control panel and mechanical stroke counter - manual cutting gap adjustment - 3x support arms - foot switch * Machinevideo : https://www.youtube.com/watch?v=nkZfJ0M5H_U

sheet width 2540 mm︱plate thickness 2,0 mm︱thickness at "Niro-steel" 1,25 mm︱no. of strokes 34 Hub/min︱cutting angle 1,4° ︱table height 820 mm︱distance between columns 2600 mm︱Control konv. ︱engine output 4,0 kW︱weight of the machine ca. 1330 kg.︱range L-W-H 2892 x 1865 x 1430 mm︱

---

Furnishing: - robust / motorized swing-cut guillotine shears - Shatterproof, torsion-free steel welded construction - compact and clear mechanical design - All-steel knife, double-edged - 1x hold-down bar - Support/work table with 10 mm gaps - extended, extendable support table - freely movable foot switch - Operation manual * Special accessories included: - electro-motorized back gauge with analogue position display * Fine adjustment via handwheel at the front - Sheet metal holding device for thin sheet metal cuts * Machinelink : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325306

sheet width 605 mm︱plate thickness 1.50 mm︱distance between columns 605 mm︱back stop - adjustable 300 mm︱table width 605 mm︱operating pressure max 6.0 bar︱work height max. 1025 mm︱work table: 605 x 250 ︱weight of the machine ca. 268 kg︱dimensions of the machine ca. 1200 x 950 x 1300 mm︱

---

Furnishing: - pneumatically driven sheet metal shears - manual backgauge - Pneumatic pressure gauge - 2x side table stops including mm scale - 1x movable table stop - Piece counter - mechanical sheet metal hold-down device - Machine light - freely movable foot switch * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325334

sheet width 1040 mm︱plate thickness 4,0 mm︱thickness at "Niro-steel" 2,5 mm︱blade length 1100 mm︱no. of strokes ca. 38 Hub/min︱back stop - adjustable ca. 500 mm︱Control konv. ︱table height 820 mm︱Number of working hours ca. 610 h︱engine output 5,0 kW︱weight 2250 kg︱range L-W-H 1650 x 1900 x 1300 mm︱

---

** Machine from a maintenance workshop ** with only approx. 610 operating hours (!!) Furnishing: - heavy / robust electro-mechanical sheet metal shears - Machine body in a closed design as an all-steel welded construction - heavy / robust drive motor (5.0 KW) - manual back gauge, adjustable from the rear * Adjustment by handwheel, with mm scale - 1x side stop - 2x front support arms with T-slot - manual central lubrication - Operating hours counter - Special accessories: 1x set of LOTZE replacement knives * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325309

sheet width 1050 mm︱plate thickness 2,0 mm︱distance between columns 1050 mm︱down holder 1 Stück︱fence Tisch 80 - 480 mm︱fence Breiten 0 - 600 mm︱table-size 1300 x 600 mm︱work height max. 760 mm︱total power requirement manuell kW︱weight of the machine ca. 413 kg.︱range L-W-H 2,0 x 1,04 x 1,6 m︱

---

- Including adjustable stop on the work table for miter cuts - The knife can be lifted easily thanks to the counterweight on the back - Large work table for safe placement of the sheet metal plates - Sheets can be pushed through, i.e. longer sheets can be cut - Handwheel on the front to adjust the back gauge - Comes with a robust cast iron base as standard - Long service life thanks to knives made of quality steel - Standard with hold-down device including quick-release clamp - Robust machine construction for high stability Furnishing: - manual lever shears - stable execution - hold-down bars - Side scale with unit of measurement - Table stop / width stop

sheet width 2540 mm︱plate thickness 3.25 mm︱throat 100 mm︱no. of strokes 60.0 Hub/min︱back stop - adjustable 530 mm︱voltage 400 V︱engine output 7.5 kW︱weight 2450 kg︱range L-W-H 3600 x 1000 x 1560 mm︱

---

Furnishing: - robust electric motorized guillotine shears - stable, front support/work table - Front control panel - including emergency stop button - manual back gauge up to approx. 700 mm - adjustable by handwheel, with analogue mm scale display - 1x front side stops - 3x front support arms - manual cutting gap adjustment - Cut/lift confirmation by foot pedal - 1x freely movable foot switch - rear sheet metal slide - User manual (PDF) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325320

sheet width 1040 mm︱plate thickness 2,50 mm︱no. of strokes 63 Hub/min︱cutting angle 1,66 °︱column arm 100 mm︱table height ca. 750 mm︱total power requirement 3,0 kW︱weight of the machine ca. 750 kg︱range L-W-H 1470 x 1550 x 1020 mm︱

---

** Refurbished - shear blades sharpened ** like New (!!) Furnishing: - manual backgauge 0-550 mm - with analogue measuring scale and magnifying glass - adjustable in front, by adjusting lever - 1x long side stop 850 mm - free-moving footswitch - Scratch protection on support table * Machinevideo : https://www.youtube.com/watch?v=8cb4EqRUxIs

sheet width 1050 mm︱plate thickness 3.0 mm︱thickness at "Niro-steel" 1.5 mm︱no. of strokes 35 Hub/min︱cutting angle 2°30 °︱engine output 3.0 kW︱table height 810 mm︱weight of the machine ca. 1150 kg.︱range L-W-H 1300 x 1520 x 1170 mm︱

---

** from a maintenance workshop (!!) Furnishing: - robust electro-motorized metal sheet shears - manual backgauge - adjustable up to 610 mm, using the handwheel from the back - 1x side stop including mm scale - 2x table sheet metal support arms - Piece counter - freely movable foot switch - rear sheet metal slide - EMERGENCY stop button at the front * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325126

sheet width 2040 mm︱plate thickness 3.0 mm︱thickness at "Niro-steel" 1.5 mm︱no. of strokes 50 Hub/min︱cutting angle 1.4 Grad︱table height 750 mm︱distance between columns 2120 mm︱back stop - adjustable 1.0 - 550 mm︱column arm 100 mm︱Control manuell ︱engine output 5.5 kW︱weight of the machine ca. 2050 kg.︱range L-W-H 2600 x 1980 x 1400 mm︱

---

Furnishing: - robust / motorized swing-cut guillotine shears - Shatterproof, torsion-free steel welded construction - compact and clear mechanical design - manual backgauge, with analogue position display * adjustable from the front * Continuous adjustment over the entire travel range * Adjustment range 1.0 - 550 mm - Machine side stand with projection .. 100 mm - manual cutting gap adjustment - 1x hold-down bar - 1x long side stop - 2x support arms - 1x freely movable foot switch - rear sheet metal slide - 2x EMERGENCY stop buttons at the front - Connection cable including plug - original instruction manual * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325338