‚
European network of stockholding machinery dealers
+49 (0) 2389 5299080
Search service Sell used machines

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:
             View: 

              Search: 



          Showoffers:
          Build year From:
          1950
          Build year To:
          2021

          Plate Bending Machine - 3 Rolls

          Machinelist: Plate Bending Machine - 3 Rolls

          Plate Bending Machine - 3 Rolls

          used Sheet metal working / shaeres / bending Plate Bending Machine - 3 Rolls BENDMAK CYL 130-15/4.5

          • SKM Industriemaschinen
          • Röntgenstr. 3
          • 89264 Weißenhorn
          • Deutschland
          • +49 (0) 7309 954 986 0
            +49 (0) 7309 954 986 1
          • info@skm-maschinen.de
            www.skm-maschinen.de
          #2032-1037 · Plate Bending Machine - 3 Rolls

          BENDMAK - CYL 130-15/4.5 - - 2019 -

          Technical details
          Working length: 1550 mm Pre-bending: 4.0 mm maximum thickness: 4.5 mm Roll-Ø: 130 mm min. Bending Ø: 190 mm Engine power: 2.2 kW dimensions (LxWxH): 2320 x 850 x 1200 mm Weight: 1360 kg ADDITIONAL INFORMATION incl. induction-hardened rolls - asymmetrical 3-rolls system - stable cast iron construction - Induction-hardened rolls, also for the treatment of VA steel suitable - Upper roller swillable out incl. eccentric cam fastener - Wire grooves at the end of the rolls - by handwheel adjustable lower roll - incl. Conical Bending Device - Control console incl. foot pedal - Emergeny-stop-rope optional: - digital readout - motorised back roll adjustment
            Description :
            Working length: 1550 mm
            Pre-bending: 4.0 mm
            maximum thickness: 4.5 mm
            Roll-Ø: 130 mm
            min. Bending Ø: 190 mm
            Engine power: 2.2 kW
            dimensions (LxWxH): 2320 x 850 x 1200 mm
            Weight: 1360 kg

            ADDITIONAL INFORMATION

            incl. induction-hardened rolls


            - asymmetrical 3-rolls system

            - stable cast iron construction

            - Induction-hardened rolls, also for the treatment of VA steel suitable

            - Upper roller swillable out incl. eccentric cam fastener

            - Wire grooves at the end of the rolls

            - by handwheel adjustable lower roll

            - incl. Conical Bending Device

            - Control console incl. foot pedal

            - Emergeny-stop-rope



            optional:

            - digital readout
            - motorised back roll adjustment
          used Sheet metal working / shaeres / bending Plate Bending Machine - 3 Rolls DAVI MCO 3022

          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland
          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-14203 · Plate Bending Machine - 3 Rolls

          DAVI - MCO 3022 - - 1991 -

          Technical details
          - conical bending - hydr. hinged bearing - DRO for adjustment of both side rolls
            Description :
            - conical bending
            - hydr. hinged bearing
            - DRO for adjustment of both side rolls
          used Sheet metal working / shaeres / bending Plate Bending Machine - 3 Rolls FACCIN 3 HEL

          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland
          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-06391 · Plate Bending Machine - 3 Rolls

          FACCIN - 3 HEL - - 2009 -

          Technical details
          roll surface width 3000 mm︱length 5000 mm︱width 2000 mm︱height 2100 mm︱side roll diameter 300 mm︱material strength at pre-bending 18 mm︱ 3 ︱Bending speed 0-5 °/sec︱output 20 kw︱weight of the machine ca. ca. 13000 t︱
            roll surface width 3000 mm
            length 5000 mm
            width 2000 mm
            height 2100 mm
            side roll diameter 300 mm
            material strength at pre-bending 18 mm
            3
            Bending speed 0-5 °/sec
            output 20 kw
            weight of the machine ca. ca. 13000 t
          used Sheet metal working / shaeres / bending Plate Bending Machine - 3 Rolls Fastenrath 1020x5

          • G. FOLMER Industriebedarf
          • Mangenbergerstr. 347
          • 42655 Solingen
          • Deutschland
          • +49 21241071
            +49 21241276
          • folmer.maschinen@t-online.de
          #2010-1042 · Plate Bending Machine - 3 Rolls

          Fastenrath - 1020x5 - - 1959 -

          Technical details
          sheet width 1020 mm︱plate thickness 5 mm︱roll diameter 110 mm︱weight of the machine ca. 0,55 t︱
            sheet width 1020 mm
            plate thickness 5 mm
            roll diameter 110 mm
            weight of the machine ca. 0,55 t
          used Sheet metal working / shaeres / bending Plate Bending Machine - 3 Rolls FASTI 1020 x 2,25

          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland
          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3406 · Plate Bending Machine - 3 Rolls

          FASTI - 1020 x 2,25 - - 1965 -

          Technical details
          used Sheet metal working / shaeres / bending Plate Bending Machine - 3 Rolls FASTI 1020 x 3

          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland
          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3391 · Plate Bending Machine - 3 Rolls

          FASTI - 1020 x 3 - - 1956 -

          Technical details
          right side stand was probably broken, was professionally repaired and strengthened. Reinforcement on left and right side of the sids stand with 10 mm sheet steel each
            Description :
            right side stand was probably broken, was professionally repaired and strengthened.

            Reinforcement on left and right side of the sids stand with 10 mm sheet steel each
          used Sheet metal working / shaeres / bending Plate Bending Machine - 3 Rolls FASTI 1020-1,5

          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland
          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-05785 · Plate Bending Machine - 3 Rolls

          FASTI - 1020-1,5 - - 1970 -

          Technical details
          plate thickness max. 1,5 mm︱sheet width max. 1.020 mm︱Year ca. 1970 ︱manual ︱ ︱ ︱
          ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
            plate thickness max. 1,5 mm
            sheet width max. 1.020 mm
            Year ca. 1970
            Description :

            ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
            Please note:
            The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.
            Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.
            ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
          used Sheet metal working / shaeres / bending Plate Bending Machine - 3 Rolls FASTI 104-10-2.5

          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland
          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-06119 · Plate Bending Machine - 3 Rolls

          FASTI - 104-10-2.5 - - unbekannt -

          Technical details
          used Sheet metal working / shaeres / bending Plate Bending Machine - 3 Rolls FASTI 109 / 28

          • Isabelle Knops
          • Opladener Str. 126
          • 40789 Monheim am Rhein
          • Deutschland
          • +49 (0)2173-4999611
            +49 (0)2173-8546560
          • isabelle.knops@isabelleknops.com
            www.isabelleknops.com
          #2013-E0405 · Plate Bending Machine - 3 Rolls

          FASTI - 109 / 28 - - -

          Technical details
          Plate Bending Machine - 3 Rolls / Brand: FASTI / Type: 109 / 28 Year of construction: 05/1971 The machine can be inspected by appointment. Operational state / ready for use. Technical data: - Sheet width / roll length: 2.040 mm - Bending capacity: 12 mm at 40 kp/mm2 - Bending capacity approx.: 80% of the bending capacity - Top roll diameter: 225 mm - Back roll diameter: 225 mm - Bottom roll diameter: 225 mm - Motor power main drive: 11 kW - Motor power Rear roller drive: 4 kW - Machine weight approx.: 4,5 tons - Space requirement approx.: 3,45 x 1,1 x 1,4 m Equipment: - 2-roll drive - Motorized feed of the rear roller - Foot switch - EMERGENCY STOP The machine is adjusted manually. Supplementary information: An inspection/maintenance was carried out annually by the company's maintenance personnel. The machine has not been overhauled. The pull rope switch was only retrofitted for safety reasons. Without guarantee for completeness and correctness of the technical information and the equipment.
            Description :
            Plate Bending Machine - 3 Rolls / Brand: FASTI / Type: 109 / 28
            Year of construction: 05/1971

            The machine can be inspected by appointment.

            Operational state / ready for use.

            Technical data:
            - Sheet width / roll length: 2.040 mm
            - Bending capacity: 12 mm at 40 kp/mm2
            - Bending capacity approx.: 80% of the bending capacity
            - Top roll diameter: 225 mm
            - Back roll diameter: 225 mm
            - Bottom roll diameter: 225 mm
            - Motor power main drive: 11 kW
            - Motor power Rear roller drive: 4 kW
            - Machine weight approx.: 4,5 tons
            - Space requirement approx.: 3,45 x 1,1 x 1,4 m

            Equipment:
            - 2-roll drive
            - Motorized feed of the rear roller
            - Foot switch
            - EMERGENCY STOP

            The machine is adjusted manually.

            Supplementary information:
            An inspection/maintenance was carried out annually by the company's maintenance
            personnel.
            The machine has not been overhauled.
            The pull rope switch was only retrofitted for safety reasons.

            Without guarantee for completeness and correctness of the technical information
            and the equipment.
          used Sheet metal working / shaeres / bending Plate Bending Machine - 3 Rolls FASTI A 2

          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland
          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-06273 · Plate Bending Machine - 3 Rolls

          FASTI - A 2 - - 1967 -

          Technical details
          sheet width 103 mm︱weight 300 kg︱drive ja ︱ Gußhebel abgebrochen ︱
            sheet width 103 mm
            weight 300 kg
            drive ja
            Gußhebel abgebrochen
          •   
          •   
          • 1  
            •

            Trader Profile:   SKM Industriemaschinen

          Contact Trader



            SKM Industriemaschinen
           Röntgenstr. 3
            89264 - Weißenhorn
            Deutschland
            +49 (0) 7309 954 986 0">+49 (0) 7309 954 986 0
            +49 (0) 7309 954 986 1
            info@skm-maschinen.de
            www.skm-maschinen.de

          Profile of Trader

          Welcome to the SKM Industrial Machinery company

          With us you can place your trust in a specialist. We are your competent partner for used and new machine tools. We offer the widest selection – ranging from the simple table drill to the complex 7 axis turning centre.

          Whether new or used equipment, service work, commissioning, spare parts, dismantling and transport organisation, leasing and financing - with SKM Industrial Machinery you choose a competent and reliable partner.

          At our business premises and on our website you can find reliable used CNC machine technology for your personal needs, irrespective of whether it is the most accurate drilling, milling, bending or lathe work. Of course, we also offer a comprehensive spare parts service for industrial machinery. We offer vendor-independent consulting on all aspects of machine tools.

          Regardless of whether you are planning a new investment, have current production problems or prefer to rely on a high-quality used CNC machine.

          SKM Industriemaschinen
          Röntgenstr. 3
          89264 Weißenhorn
          Germany

          Tel.: +49 (0) 7309 / 954 986-0
          Fax : +49 (0) 7309 /954 986-1

          E-Mail : info@skm-maschinen.de
          www.skm-maschinen.de




          Find a 3-roll bending machine for your business needs
          Discover the versatility of a 3-roll bending machine

          Roll benders employ rollers situated on a jig to form curves and arcs in a variety of metals. The process is critical to metalworking for a wide variety of industries. A 3-roll bending machine is one of the most commonly used pieces of equipment for plate bending if you're looking for your next 3-roll bending machine check out the huge selection available at LagerMaschinen. You're sure to find just the used machine to suit both your business and your budget.

          A 3-roll bending machine is crucial to your metalworking business

          There are a wide variety of custom metalworking tools available on the market today. Even within a specific category industry professionals have a lot of choices available to them. For example a 3-roll bending machine can encompass a range of different sizes and speeds. It may operate vertically or horizontally and be manually or electronically controlled. No matter what your needs are when shopping for your next 3-roll bending machine you can find quality used machinery at LagerMaschinen.

          Buying used machinery gives you the most bang for you buck

          If you're looking to make the most of your time and money consider shopping for used machinery online. LagerMaschinen is your leading source for the best selection of machines like a 3-roll bending machine. The easy-to-use interface makes shopping for equipment for your business a breeze. Shop from the comfort of your home or office search by price or location and enjoy the hassle-free shopping experience that LagerMaschinen can provide!


          Your next 3-roll plate bending machine from LagerMaschinen
          Find the best 3-roll plate bending machine for your needs

          Roll bending is a process used in the manufacturing of ductile materials like sheet metal. This process creates rounded shapes by passing materials repeatedly through a series of rollers in order to create uniform curvature with minimal damage to the surface of the materials. A 3-roll plate bending machine is ideal for creating arched shapes in sheet metal and other materials. If you're shopping for a 3-roll plate bending machine check out the variety of used machines available at LagerMaschinen.

          The advantages of roll bending are numerous

          Roll bending is one of the favoured methods for the creation of curves in sheet metal. As the process is relatively simple it doesn't require a large amount of manpower or constant supervision to complete. When you invest in a 3-roll plate bending machine you can rest assured that the end product will be durable and the cost to you and your company will be minimal. Find your next 3-roll plate bending machine at LagerMaschinen.

          Convenience meets quality at LagerMaschinen

          Investing in industrial metalworking machinery such as a 3-roll plate bending machine can be a daunting and sometimes stressful process. LagerMaschinen aims to take all the hassle out of shopping for your business by offering you a user-friendly site that lets you browse used equipment by price model or location. You can quickly and easily find the perfect used machinery for your needs from the comfort of your home or office using LagerMaschinen.

          TOP Manufacturer:

          SCHÄFER - FASTI - FACCIN - FASTENRATH -

          SKM Industriemaschinen 89264 - Weißenhorn Röntgenstr. 3 Deutschland
          SKM Industriemaschinen

          Röntgenstr. 3



          Contact Trader


            SKM Industriemaschinen
           Röntgenstr. 3
            89264 - Weißenhorn
            Deutschland
            +49 (0) 7309 954 986 0
            +49 (0) 7309 954 986 1
            info@skm-maschinen.de
            www.skm-maschinen.de
            Contact person:
           

          Trader Profile



          Machine category


          Abkantpresse - hydraulisch · Absauggerät · Auswuchtmaschine · Bandanlage · Bohr- und Fräsmaschine · Exzenterpresse - Doppelständer · Fräsmaschine - Vertikal · Gewinderollmaschine · Kaltkreissäge · Langdrehautomat · Ofen - Gas · Profilschleifmaschine · Rohrbiegemaschine · Schweißdrehtisch · Schweißdrehtisch - rund · Sicken- und Bördelmaschine · Spänezerkleinerer · Stemmmaschine · Tafelschere - hydraulisch · Tafelschere - mechanisch · Vertikaldrehmaschine · Werkstattpressen - hydraulisch · Werkzeugaufnahme · Werkzeugfräsmaschine - Universal · Werkzeugschränke ·
          Compendium
          Software
          Used machines content
          Privacy
          Follow us
          ©2000 - 2024, Logotech oHG · Software- and Internet Services - All rights reserved