European network of stockholding machinery dealers

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:

          Coil Line

          Machinelist: Coil Line


          Coil Line

          used Sheet metal working / shaeres / bending Coil Line IRON / RDI Group CRM-20


          • EnTeHa GmbH & Co.KG
          • Im Wollenklingen 6
          • 69517 Gorxheimertal
          • Deutschland

          • +49 6201 2630 545
          • info@enteha.de
            www.enteha.de
          #2081-0843 · Coil Line

          IRON / RDI Group - CRM-20 - - unbekannt -

          Technical details
          sheet width - mm︱coil outside dia. - mm︱weight max. in kg - kg︱total power requirement 2,2 kW︱weight of the machine ca. - t︱dimensions of the machine ca. - m︱
          Coil - Durchlauf / Blechvorschub Drive: 2,2
            sheet width - mm
            coil outside dia. - mm
            weight max. in kg - kg
            total power requirement 2,2 kW
            weight of the machine ca. - t
            dimensions of the machine ca. - m
            Description :
            Coil - Durchlauf / Blechvorschub




            Drive: 2,2


        • EnTeHa GmbH & Co.KG
        • Im Wollenklingen 6
        • 69517 Gorxheimertal
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Coil Line HS-AUTOMATION MS 4000 / MR 58


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-60165 · Coil Line

          HS-AUTOMATION - MS 4000 / MR 58 - - 2009 -

          Technical details
          sheet width 0600 mm︱coil outside dia. 1500 mm︱weight max. in kg 4000 kg︱width of sheet max. ca. 3,60 mm︱sheet thickness - min. 0,80 mm︱diam. of the rolls ca. 80 mm︱nomb. of straightening rolls 7 ︱feed rolls 2 ︱speed 5-30 m/min︱range of expansion ca. 475-535 mm︱expansion hydraulisch ︱pinch roll hydraulisch ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Decoiler type MS 4000 - Hydraulic spreading - Hydraulic pressure roller from above - Swivel-in limit roller at the front, contact disc at the rear - Auxiliary drive - Reel movable - Coil lifting table Straightening machine type MR 58 Rollers hardened and ground. - Pneumatically ventilated feed roller - Straightening rollers adjustable as a block - Lateral belt guidance at the inlet - Hydraulic band insertion aid - Straightening head can be opened - Large roll basket and transfer table at the outlet - Ultrasonic transmitter for loop control - Swivel control panel - Control Siemens S7
            sheet width 0600 mm
            coil outside dia. 1500 mm
            weight max. in kg 4000 kg
            width of sheet max. ca. 3,60 mm
            sheet thickness - min. 0,80 mm
            diam. of the rolls ca. 80 mm
            nomb. of straightening rolls 7
            feed rolls 2
            speed 5-30 m/min
            range of expansion ca. 475-535 mm
            expansion hydraulisch
            pinch roll hydraulisch
            Description :
            Decoiler type MS 4000
            - Hydraulic spreading
            - Hydraulic pressure roller from above
            - Swivel-in limit roller at the front, contact disc at the rear
            - Auxiliary drive
            - Reel movable
            - Coil lifting table

            Straightening machine type MR 58

            Rollers hardened and ground.
            - Pneumatically ventilated feed roller
            - Straightening rollers adjustable as a block
            - Lateral belt guidance at the inlet
            - Hydraulic band insertion aid
            - Straightening head can be opened
            - Large roll basket and transfer table at the outlet
            - Ultrasonic transmitter for loop control
            - Swivel control panel
            - Control Siemens S7


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Coil Line ARKU AH 3000/2/250/ST / RM 3025.4/2


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-60174 · Coil Line

          ARKU - AH 3000/2/250/ST / RM 3025.4/2 - - 2004 -

          Technical details
          sheet width 0250 mm︱coil outside dia. 1800 mm︱weight max. in kg 2 x 3000 kg︱ 3,80 mm︱ 470 - 530 mm︱ 2130 mm︱ 418,0 kW︱speed 20 m/min︱power capacity 18 kW︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Decoiler AH 3000/2/250/ST with continuously variable drive, hydraulic central spread, Automatic post-spreading system, hydraulic pressure device, hydraulic swivel, Straightening machine RM 3025.4/21 with continuously variable drive, driven straightening rollers, manual Roller mill adjustment, quick-change device for the straightening rollers Belt loop control via ultrasound Material thickness / with material width 3.80 / 250 mm Material thickness / with material width 6.00 / 100 mm
            sheet width 0250 mm
            coil outside dia. 1800 mm
            weight max. in kg 2 x 3000 kg
            3,80 mm
            470 - 530 mm
            21
            30 mm
            4
            18,0 kW
            speed 20 m/min
            power capacity 18 kW
            Description :
            Decoiler AH 3000/2/250/ST
            with continuously variable drive, hydraulic central spread,
            Automatic post-spreading system, hydraulic pressure device, hydraulic swivel,

            Straightening machine RM 3025.4/21
            with continuously variable drive, driven straightening rollers, manual
            Roller mill adjustment, quick-change device for the straightening rollers
            Belt loop control via ultrasound
            Material thickness / with material width 3.80 / 250 mm
            Material thickness / with material width 6.00 / 100 mm


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Coil Line DREHER 1676D-FQ/2380 D-FPS


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-60157 · Coil Line

          DREHER - 1676D-FQ/2380 D-FPS - - 1999/97/2012 Umbau -

          Technical details
          sheet width 0500 mm︱coil outside dia. 1400 mm︱weight max. in kg 4000 kg︱plate thickness 0,80 - 3,60 mm︱diam. of the rolls ca. 80 mm︱feed rolls 2 ︱nomb. of straightening rolls 7 ︱exit pinch rolls 2 ︱speed 5-30 m/min︱range of expansion ca. 445 - 530 mm︱expansion manuell ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Control conversion to SIEMENS S7 in 2012 - pneumatic pressure roller on the side - pneumatically ventilated feed roller - Straightening rollers manually adjustable - lateral belt guide at the inlet - Large roller basket at the outlet - Ultrasonic transmitter for loop control - Roller feed type 1125 D - Bandwidth max. 510 mm - Band thickness max. 6 mm with full width 5.50 mm - Roll diameter 125mm - Feed speed: max. 100 m/min. - pneumatically ventilated top roller - Lateral tape guide with digital display - Inlet roller basket
            sheet width 0500 mm
            coil outside dia. 1400 mm
            weight max. in kg 4000 kg
            plate thickness 0,80 - 3,60 mm
            diam. of the rolls ca. 80 mm
            feed rolls 2
            nomb. of straightening rolls 7
            exit pinch rolls 2
            speed 5-30 m/min
            range of expansion ca. 445 - 530 mm
            expansion manuell
            Description :
            Control conversion to SIEMENS S7 in 2012

            - pneumatic pressure roller on the side
            - pneumatically ventilated feed roller
            - Straightening rollers manually adjustable
            - lateral belt guide at the inlet
            - Large roller basket at the outlet
            - Ultrasonic transmitter for loop control
            - Roller feed type 1125 D
            - Bandwidth max. 510 mm
            - Band thickness max. 6 mm with full width 5.50 mm
            - Roll diameter 125mm
            - Feed speed: max. 100 m/min.
            - pneumatically ventilated top roller
            - Lateral tape guide with digital display
            - Inlet roller basket


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Coil Line AMT AHR 1,5


          • Maschinen Schwartpaul GmbH
          • Am Wasserwerk 1
          • 58840 Plettenberg
          • Deutschland

          • +49 (0)2391-95960
            +49 (0)2391-959620
          • info@maschinen-schwartpaul.de
            www.maschinen-schwartpaul.de
          #2020-15438 · Coil Line

          AMT - AHR 1,5 - - 1999 -

          Technical details
          sheet width 400 mm︱coil outside dia. 1200 mm︱weight max. in kg 1500 kg︱
            sheet width 400 mm
            coil outside dia. 1200 mm
            weight max. in kg 1500 kg


        • Maschinen Schwartpaul GmbH
        • Am Wasserwerk 1
        • 58840 Plettenberg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Coil Line KOHLER 30.400/9-2000.2H


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-60167 · Coil Line

          KOHLER - 30.400/9-2000.2H - - 1995 -

          Technical details
          sheet width 0400 mm︱coil outside dia. 460 - 530 mm︱weight max. in kg 2 x 2000 kg︱plate thickness 0,40 - 3,00 mm︱coil outside - diam. ca. 1500 mm︱nomb. of straightening rolls 9 ︱diam. of the rolls ca. 30 mm︱speed 0-40 m/min︱total power requirement 15 kW︱weight of the machine ca. 5,20 t︱dimensions of the machine ca. m︱
          - straightening machine type KRE 30.400/9 with infinitely variable drive, motoric adjustment of the roller cassette, rapid clamping device - double decoiler type 2000.2 H with pneumatic lag brake, hydraulic expansion, hydraulic snubber roll - coil loop control via ultrasound
            sheet width 0400 mm
            coil outside dia. 460 - 530 mm
            weight max. in kg 2 x 2000 kg
            plate thickness 0,40 - 3,00 mm
            coil outside - diam. ca. 1500 mm
            nomb. of straightening rolls 9
            diam. of the rolls ca. 30 mm
            speed 0-40 m/min
            total power requirement 15 kW
            weight of the machine ca. 5,20 t
            Description :
            - straightening machine type KRE 30.400/9
            with infinitely variable drive, motoric adjustment of the roller cassette,
            rapid clamping device
            - double decoiler type 2000.2 H
            with pneumatic lag brake, hydraulic expansion, hydraulic snubber roll
            - coil loop control via ultrasound


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Coil Line COVEMA/SCHWABE VRMA32/96-MHM 2


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-60173 · Coil Line

          COVEMA/SCHWABE - VRMA32/96-MHM 2 - - 1994 -

          Technical details
          sheet width 0320 mm︱coil outside dia. 1650 mm︱weight max. in kg 2000 kg︱width of the decoiler 400 mm︱coil inside-diam. ca. 350 - 460 mm︱diam. of the rolls ca. 40 mm︱nomb. of straightening rolls 7 ︱sheet thickness - max. 2,00 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          COVEMA-SCHWABE belt system consisting of: Reel MHM 2 - hydraulic expansion (motor 1.5kW/1500 U) - hydraulic pressure roller - with drive Feed leveling machine VRMA 32/96 The straightening head can be opened using hydraulics Intermediate ventilation with operating instructions with control panel
            sheet width 0320 mm
            coil outside dia. 1650 mm
            weight max. in kg 2000 kg
            width of the decoiler 400 mm
            coil inside-diam. ca. 350 - 460 mm
            diam. of the rolls ca. 40 mm
            nomb. of straightening rolls 7
            sheet thickness - max. 2,00 mm
            Description :
            COVEMA-SCHWABE belt system consisting of:

            Reel MHM 2
            - hydraulic expansion (motor 1.5kW/1500 U)
            - hydraulic pressure roller
            - with drive

            Feed leveling machine VRMA 32/96

            The straightening head can be opened using hydraulics
            Intermediate ventilation

            with operating instructions
            with control panel


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Coil Line KOHLER 18.260.19-1000.2


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-60163 · Coil Line

          KOHLER - 18.260.19-1000.2 - - 1991/2023CHECK -

          Technical details
          sheet width 0260 mm︱coil outside dia. 1200 mm︱weight max. in kg 2 x 1000 kg︱sheet thickness - max. 2,00 mm︱nomb. of straightening rolls 19 ︱diam. of the rolls ca. 18 mm︱speed 0-60 m/min︱run-in height 1200-1400 mm︱sheet thickness - min. 0,30 mm︱working direction left - right ja/yes ︱range of expansion ca. 360 - 430 + 460 - 530 mm︱total power requirement 13 kW︱weight of the machine ca. 2,50 t︱dimensions of the machine ca. 5,50 x 1,80 x 2,10 m︱
          - Speed control ultrasonic via belt loop - Digital measuring device - Motorized roller mill adjustment - Drive motor 8 kW - Hydraulic reel expansion - Pneumatic reel brake - Quick change device for the straightening rollers and support rollers - SIEMENS S5 control - Press inlet height 1200-1400 mm - Electrical plans in the control cabinet - Instruction manual available Dimensions: - Straightener with reel 3.00 x 1.80 x 2.10 m - Tape guide 1.50 x 0.50 x 1.40 m - Control cabinet 0.90 x 0.60 x 2.10 m The system is energized and can be tested with material.
            sheet width 0260 mm
            coil outside dia. 1200 mm
            weight max. in kg 2 x 1000 kg
            sheet thickness - max. 2,00 mm
            nomb. of straightening rolls 19
            diam. of the rolls ca. 18 mm
            speed 0-60 m/min
            run-in height 1200-1400 mm
            sheet thickness - min. 0,30 mm
            working direction left - right ja/yes
            range of expansion ca. 360 - 430 + 460 - 530 mm
            total power requirement 13 kW
            weight of the machine ca. 2,50 t
            dimensions of the machine ca. 5,50 x 1,80 x 2,10 m
            Description :
            - Speed control ultrasonic via belt loop
            - Digital measuring device
            - Motorized roller mill adjustment
            - Drive motor 8 kW
            - Hydraulic reel expansion
            - Pneumatic reel brake
            - Quick change device for the straightening rollers and support rollers
            - SIEMENS S5 control
            - Press inlet height 1200-1400 mm
            - Electrical plans in the control cabinet
            - Instruction manual available

            Dimensions:
            - Straightener with reel 3.00 x 1.80 x 2.10 m
            - Tape guide 1.50 x 0.50 x 1.40 m
            - Control cabinet 0.90 x 0.60 x 2.10 m

            The system is energized and can be tested with material.


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Coil Line WANZKE HRS 500/2500


          • Pressen HAAS GmbH
          • Kreuzsteig 6
          • 72479 Straßberg
          • Deutschland

          • +49 7574 59 97 59
            +49 7574 92 17 24
          • info@pressen-haas.de
            www.pressen-haas.de
          #2053-0346 · Coil Line

          WANZKE - HRS 500/2500 - - 1990 -

          Technical details
          Coil weight 2,5 t︱Material width 50 - 500 mm︱Coil exterior diameter 1400 mm︱Expansion range 420 - 520 mm︱Material width 500 mm︱Number of levelling rolls 9 Stk.︱Diameter of the levelling rolls 50 mm︱Number of pinch rolls 2 Stk.︱Material thickness 6 mm︱Feeding speed 6 - 24 m / min︱
            Coil weight 2,5 t
            Material width 50 - 500 mm
            Coil exterior diameter 1400 mm
            Expansion range 420 - 520 mm
            Material width 500 mm
            Number of levelling rolls 9 Stk.
            Diameter of the levelling rolls 50 mm
            Number of pinch rolls 2 Stk.
            Material thickness 6 mm
            Feeding speed 6 - 24 m / min


        • Pressen HAAS GmbH
        • Kreuzsteig 6
        • 72479 Straßberg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Coil Line KOHLER 150.2/150.1


          • Ambold Pressen GmbH
          • Sommeritzer Straße 43
          • 04626 Schmölln
          • Deutschland

          • +49 (0)3449183314
            +49 (0)3449123492
          • info@ambold-pressen.de
            www.ambold-pressen.de
          #1010-633 · Coil Line

          KOHLER - 150.2/150.1 - - 1989 -

          Technical details
          sheet width 100 mm︱coil outside dia. 800 mm︱weight max. in kg 150 kg︱speed 0 - 60 m/min︱total power requirement 2 kW︱weight of the machine ca. t︱dimensions of the machine ca. 2,89 x 1,38 x 1,4 m︱ 2 x 150 kg︱band width 100 mm︱ diameter of the mandrel min. 170 max. 540 mm︱
          -Coil rewinding system with 3 single coils decoiler, type 150.2: -Spool width: 140mm -Spreading: manual bolt spreading -Spool outer diameter: 800 mm -Brake: disc brake pneu. -Side shift: manually via spindle winding reel, type 150.1: -Brake: engine brake -Side shift: manual via spindle
            sheet width 100 mm
            coil outside dia. 800 mm
            weight max. in kg 150 kg
            speed 0 - 60 m/min
            total power requirement 2 kW
            dimensions of the machine ca. 2,89 x 1,38 x 1,4 m
            2 x 150 kg
            band width 100 mm
            diameter of the mandrel min. 170 max. 540 mm
            Description :
            -Coil rewinding system with 3 single coils decoiler, type 150.2:
            -Spool width: 140mm
            -Spreading: manual bolt spreading
            -Spool outer diameter: 800 mm
            -Brake: disc brake pneu.
            -Side shift: manually via spindle winding reel, type 150.1:

            -Brake: engine brake
            -Side shift: manual via spindle


        • Ambold Pressen GmbH
        • Sommeritzer Straße 43
        • 04626 Schmölln
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Coil Line KOHLER 10 120 - 300.2


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-60159 · Coil Line

          KOHLER - 10 120 - 300.2 - - 1979 -

          Technical details
          sheet width 0120 mm︱coil outside dia. 1200 mm︱weight max. in kg 300 kg︱sheet thickness - max. 1,00 mm︱diam. of the rolls ca. 10 mm︱nomb. of straightening rolls 16 ︱ diameter of the mandrel 350 - 530 mm︱total power requirement 5,50 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          - Reel and straightener as a combination with a common frame - Manually adjustable reel brake - Coil limiting ring at the front, fixed washer at the rear - Reel can be moved manually laterally - manual reel spreading - side belt – guide rollers with central adjustment at the inlet - manual block adjustment of the straightening mechanism, display via dial gauges - Oil - central lubrication - Loop control via sensor - Speed adjustable via potentiometer - Manually adjustable hold-down roller at the inlet - Large roller basket with cover on the outlet - Free-standing control panel - Lateral adjustment of the reel using a hand crank
            sheet width 0120 mm
            coil outside dia. 1200 mm
            weight max. in kg 300 kg
            sheet thickness - max. 1,00 mm
            diam. of the rolls ca. 10 mm
            nomb. of straightening rolls 16
            diameter of the mandrel 350 - 530 mm
            total power requirement 5,50 kW
            Description :
            - Reel and straightener as a combination with a common frame
            - Manually adjustable reel brake
            - Coil limiting ring at the front, fixed washer at the rear
            - Reel can be moved manually laterally
            - manual reel spreading
            - side belt – guide rollers with central adjustment at the inlet
            - manual block adjustment of the straightening mechanism, display via dial
            gauges
            - Oil - central lubrication
            - Loop control via sensor
            - Speed adjustable via potentiometer
            - Manually adjustable hold-down roller at the inlet
            - Large roller basket with cover on the outlet
            - Free-standing control panel
            - Lateral adjustment of the reel using a hand crank


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Coil Line KOHLER 12 120 -150.2


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-60158 · Coil Line

          KOHLER - 12 120 -150.2 - - 1979 -

          Technical details
          sheet width 0120 mm︱coil outside dia. 800 mm︱weight max. in kg 150 kg︱plate thickness 1,50 mm︱diam. of the rolls ca. 12 mm︱nomb. of straightening rolls 16 ︱ diameter of the mandrel 180 - 550 mm︱total power requirement 5 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          - Reel and straightener as a combination with a common frame - Manually adjustable reel brake - Coil limiting ring at the front, fixed washer at the rear - Reel can be moved manually laterally - manual reel spreading - side belt – guide rollers with central adjustment at the inlet - manual block adjustment of the straightening mechanism, display via dial gauges - Oil - central lubrication - Loop control via sensor - Speed adjustable via potentiometer - Belt support at the outlet - Free-standing control panel - Lateral adjustment of the reel using a hand crank - Belt support at the outlet
            sheet width 0120 mm
            coil outside dia. 800 mm
            weight max. in kg 150 kg
            plate thickness 1,50 mm
            diam. of the rolls ca. 12 mm
            nomb. of straightening rolls 16
            diameter of the mandrel 180 - 550 mm
            total power requirement 5 kW
            Description :
            - Reel and straightener as a combination with a common frame
            - Manually adjustable reel brake
            - Coil limiting ring at the front, fixed washer at the rear
            - Reel can be moved manually laterally
            - manual reel spreading
            - side belt – guide rollers with central adjustment at the inlet
            - manual block adjustment of the straightening mechanism, display via dial
            gauges
            - Oil - central lubrication
            - Loop control via sensor
            - Speed adjustable via potentiometer
            - Belt support at the outlet
            - Free-standing control panel
            - Lateral adjustment of the reel using a hand crank
            - Belt support at the outlet


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact

          Notching Machine

          used Sheet metal working / shaeres / bending Notching Machine UNBEKANNT A 5


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-06464 · Notching Machine

          UNBEKANNT - A 5 - - Unbekannt -

          Technical details
          plate thickness 4 mm︱ Dreieck ausklinker ︱pressure . t︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            plate thickness 4 mm
            Dreieck ausklinker
            pressure . t


        • Christoph Busch GmbH
        • Dieselstr. 22
        • 41352 Korschenbroich
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Notching Machine METALLKRAFT AKM 200-6 VP


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2390001 · Notching Machine

          METALLKRAFT - AKM 200-6 VP - - NEU -

          Technical details
          plate thickness 6 mm︱pressure 12 t︱cutting range Breite x Länge 200 mm︱no. of strokes 15 Hub/min︱cutting angle 30 - 140 °︱total power requirement 4 kW︱weight of the machine ca. 1,02 t︱dimensions of the machine ca. 1065 x 900 x 1210 mm︱
            plate thickness 6 mm
            pressure 12 t
            cutting range Breite x Länge 200 mm
            no. of strokes 15 Hub/min
            cutting angle 30 - 140 °
            total power requirement 4 kW
            weight of the machine ca. 1,02 t
            dimensions of the machine ca. 1065 x 900 x 1210 mm


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Notching Machine SIMASV AF 226


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-45 · Notching Machine

          SIMASV - AF 226 - - 2021 -

          Technical details
          gebraucht20219589prompt, Zwischenverkauf vItalien7200 €︱ 11220 mm︱ 6 mm︱ 4.5 mm︱ 45 1/min︱ 90 °︱ 3 kW︱ 700 mm︱ 750 mm︱ 1100 mm︱ 540 kg︱
          DEMO MACHINE hydraulic drive automatic adjustment of the blade gap 1 set of blades for mild steel 2 gauges angle adjustable protection cover, acrylic glas foot pedal waste chute load hook machine feet according to CErules
            gebraucht
            2021
            9589
            prompt, Zwischenverkauf v
            Italien
            7200 €
            1
            1
            220 mm
            6 mm
            4.5 mm
            45 1/min
            90 °
            3 kW
            700 mm
            750 mm
            1100 mm
            540 kg
            Description :
            DEMO MACHINE
            hydraulic drive
            automatic adjustment of the blade gap
            1 set of blades for mild steel
            2 gauges angle adjustable
            protection cover, acrylic glas
            foot pedal
            waste chute
            load hook
            machine feet
            according to CErules


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Notching Machine BERNARDO MRA-Pro


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8390110 · Notching Machine

          BERNARDO - MRA-Pro - - 2020 -

          Technical details
          plate thickness 3,0 mm︱tube diameter 60,0 mm︱motor 230 Volt︱total power requirement 1,1 kW︱
            plate thickness 3,0 mm
            tube diameter 60,0 mm
            motor 230 Volt
            total power requirement 1,1 kW


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Notching Machine HUVEMA BL-3


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-S353 · Notching Machine

          HUVEMA - BL-3 - - 2020 -

          Technical details
          Knife length 125 x 125 mm︱Plate thickness 1,5 mm︱Machine weight 29 kg︱capacity in tons - max. 3 t︱
          Brand Huvema Type BL-3 Year of make 2020 Machine weight 29 kg Capacity 3 T Blade length 125 x 125 mm Plate thickness 1,5 mm
            Knife length 125 x 125 mm
            Plate thickness 1,5 mm
            Machine weight 29 kg
            capacity in tons - max. 3 t
            Description :
            Brand Huvema
            Type BL-3
            Year of make 2020
            Machine weight 29 kg
            Capacity 3 T
            Blade length 125 x 125 mm
            Plate thickness 1,5 mm



        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Notching Machine MEULEMAN KC10


          • Valk Machines BV
          • Kadijk 6
          • 8531XD Lemmer
          • Niederlande

          • +31 514562904
          • sales@valkmachines.com
            www.valkmachines.com
          #2079-35 · Notching Machine

          MEULEMAN - KC10 - - 2018 -

          Technical details
          ︱total power requirement kW︱weight of the machine ca. t︱required space m︱
          Capacity: Ø41,9 x 2,7 R21 x 8 mm Featured with: - Footpedal - User manual (NL) Airpresse machine
            Description :
            Capacity:
            Ø41,9 x 2,7
            R21 x 8 mm

            Featured with:
            - Footpedal
            - User manual (NL)

            Airpresse machine


        • Valk Machines BV
        • Kadijk 6
        • 8531XD Lemmer
        • Niederlande

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Notching Machine HUVEMA AKM 1.6P


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-003086 · Notching Machine

          HUVEMA - AKM 1.6P - - 2013 -

          Technical details
          plate thickness 1,6 mm︱pressure 450 MPa︱ 150 x 150 x 90° ︱table surface area 650 x 500 mm︱ 875 mm︱cutting angle - upper blade 4 °︱weight of the machine ca. 75 kg︱
          • manual notching machine with lower frame • sheet thickness: - steel 450MPa to 1.6 mm, - aluminium to 2.25 mm, - plastic to 3.0 mm, • machine for demonstration
            plate thickness 1,6 mm
            pressure 450 MPa
            150 x 150 x 90°
            table surface area 650 x 500 mm
            875 mm
            cutting angle - upper blade 4 °
            weight of the machine ca. 75 kg
            Description :
            • manual notching machine with lower frame
            • sheet thickness:
            - steel 450MPa to 1.6 mm,
            - aluminium to 2.25 mm,
            - plastic to 3.0 mm,
            • machine for demonstration


        • Feyen Maschinen GmbH
        • Gelleperstr. 10
        • 47809 Krefeld
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Notching Machine TOOLPOWER TOOLPOWER MFN 1030


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-186 · Notching Machine

          TOOLPOWER - TOOLPOWER MFN 1030 - - 2012 -

          Technical details
          gebraucht20129690Fprompt, Zwischenverkauf vChina690 €︱ 1100 mm︱ 3 mm︱ 90 °︱ 90 kg︱
          Beidseitig verstellbare Anschläge Fingerschutz Ausrüstung gemäß CE Vorschriften
            gebraucht
            2012
            9690F
            prompt, Zwischenverkauf v
            China
            690 €
            1
            100 mm
            3 mm
            90 °
            90 kg
            Description :
            Beidseitig verstellbare Anschläge
            Fingerschutz
            Ausrüstung gemäß CE Vorschriften


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Notching Machine TOOLPOWER TOOLPOWER RA 1


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-413 · Notching Machine

          TOOLPOWER - TOOLPOWER RA 1 - - 2012 -

          Technical details
          gebraucht20129403prompt, Zwischenverkauf vChina180 €︱ 11/4", 3/8", 1/2" mm︱ 4 kg︱
          operation by hand lever and eccentric 3 tube diameter combined in one assembling and welding of tubesin 90 degrees angle
            gebraucht
            2012
            9403
            prompt, Zwischenverkauf v
            China
            180 €
            1
            1/4", 3/8", 1/2" mm
            4 kg
            Description :
            operation by hand lever and eccentric
            3 tube diameter combined in one
            assembling and welding of tubesin 90 degrees angle


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Notching Machine BOSCHERT K30-120 MINI S


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9397093 · Notching Machine

          BOSCHERT - K30-120 MINI S - - 2003 -

          Technical details
          4,0 mm︱ 3,0 mm︱ 30 - 120 Grad︱blade length 150 x 150 mm︱work height max. 900 mm︱table: 1000 x 650 mm︱engine output 3,0 kW︱weight 850 kg︱range L-W-H 1250 x 1000 x 1160 mm︱
          ** Machine like NEW (!!) Furnishing: - Notching machine with angle adjustment 30° - 120° - Simple and functional "Touch Pad" control panel * Set-up stroke * Single stroke * continuous stroke - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - adjustable lift height adjustment - Waste bin - free-moving footswitch - Operation manual BOSCHERT angle adjustment: - the one-piece 30° upper knife is within one tool both with a left and directly connected to a right lower knife - once for each notch over 30° left and once on the right. - the swivel adjustment becomes pneumatic, immediately after completion of the first notch, lightning fast carried out. * Machinelink : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9397093
            4,0 mm
            3,0 mm
            30 - 120 Grad
            blade length 150 x 150 mm
            work height max. 900 mm
            table: 1000 x 650 mm
            engine output 3,0 kW
            weight 850 kg
            range L-W-H 1250 x 1000 x 1160 mm
            Description :
            ** Machine like NEW (!!)

            Furnishing:
            - Notching machine with angle adjustment 30° - 120°
            - Simple and functional "Touch Pad" control panel
            * Set-up stroke
            * Single stroke
            * continuous stroke
            - Plexiglas protection for better transparency
            - hardened knives also for cutting stainless steel
            - planed table surface
            * to avoid 'tilting' or 'slipping' of the metal sheet
            - adjustable lift height adjustment
            - Waste bin
            - free-moving footswitch
            - Operation manual

            BOSCHERT angle adjustment:
            - the one-piece 30° upper knife is within one tool both with a left and
            directly connected to a right lower knife
            - once for each notch over 30° left and once on the right.
            - the swivel adjustment becomes pneumatic, immediately after completion of the
            first notch, lightning fast carried out.

            * Machinelink :
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9397093


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Notching Machine Durma VHKM 2006


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-S343 · Notching Machine

          Durma - VHKM 2006 - - 2002 -

          Technical details
          Knife length 200 x 200 mm︱Plate thickness 6 mm︱Varaible angle 30-140 °︱Machine dimensions (lxwxh) 1.050 x 900 x 1.300 mm︱Machine weight 1.000 kg︱
            Knife length 200 x 200 mm
            Plate thickness 6 mm
            Varaible angle 30-140 °
            Machine dimensions (lxwxh) 1.050 x 900 x 1.300 mm
            Machine weight 1.000 kg
            Description :



        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Notching Machine COMACA VAR 250/6


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9397086 · Notching Machine

          COMACA - VAR 250/6 - - 2001 -

          Technical details
          plate thickness 6,0 mm ST︱plate thickness 4,0 mm VA︱table-size 1200 x 900 mm︱blade length 250 x 250 mm︱strokes per minute 45 min︱adjustable Winkel 30°-135° mm︱work height max. 1050 mm︱engine output 4,0 kW︱weight of the machine ca. 1.300 kg︱range L-W-H 1200 x 1350 x 1600 mm︱
          Furnishing: - Robust electro-hydraulic notching machine - with adjustable angle, electro-hydraulic adjustment - 2x speeds - Inching mode for adjusting the shear blades - 2x adjustable stop rulers - Machined work table, with T-slots - free-moving footswitch - Operation manual
            plate thickness 6,0 mm ST
            plate thickness 4,0 mm VA
            table-size 1200 x 900 mm
            blade length 250 x 250 mm
            strokes per minute 45 min
            adjustable Winkel 30°-135° mm
            work height max. 1050 mm
            engine output 4,0 kW
            weight of the machine ca. 1.300 kg
            range L-W-H 1200 x 1350 x 1600 mm
            Description :
            Furnishing:
            - Robust electro-hydraulic notching machine
            - with adjustable angle, electro-hydraulic adjustment
            - 2x speeds
            - Inching mode for adjusting the shear blades
            - 2x adjustable stop rulers
            - Machined work table, with T-slots
            - free-moving footswitch
            - Operation manual


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          •   
          •   

          TOP Manufacturer:

          AMT - WANZKE -