European network of stockholding machinery dealers

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:

          Sheet metal working - shaeres - bending

          Machinelist: Sheet metal working / shaeres / bending


          Hydr. pressbrake

          used Sheet metal working / shaeres / bending Hydr. pressbrake HÄMMERLE BM 200-3100


          • IMZ Maschinen Vertriebs GmbH
          • Marie-Curie-Straße 19
          • 73529 Schwäbisch Gmünd
          • Deutschland

          • 0049 (0) 7171 987130
            0049 (0) 7171 9871329
          • info@imz.de
            www.imz.de
          #1075-6939 · Hydr. pressbrake

          HÄMMERLE - BM 200-3100 - - 1997 - Infinitron

          Technical details
          pressure 2000 kN︱chamfer lenght 3100 mm︱distance between columns 3240 mm︱Control Infinitron ︱ram stroke 400 mm︱work height max. 1104 mm︱throat 250 mm︱table width 160 mm︱pre-running speed 160 mm/s︱working feed 1-10 mm/sec︱return speed 160 mm/sec︱tank capacity 550 l︱total power requirement 28 kW︱weight of the machine ca. 16,6 t︱dimensions of the machine ca. 4,4x2,7x3,4 m︱
          CNC control Infinitron Hydro cushion MHK 1-30 Three-point die holder DH 1-30 Stop system A2 with a travel range of 600 mm Adjustment of the stop slide along the stop bar by separate controlled Z-axes Sheet metal support system H 2 Adjustment of the individual sheet metal support brackets through separately controlled W-axes Bracket SK 10 with lifting aid 0-45 ° with linear guide Current Video of the machine: https://youtu.be/kY_r29IbaQs
            pressure 2000 kN
            chamfer lenght 3100 mm
            distance between columns 3240 mm
            Control Infinitron
            ram stroke 400 mm
            work height max. 1104 mm
            throat 250 mm
            table width 160 mm
            pre-running speed 160 mm/s
            working feed 1-10 mm/sec
            return speed 160 mm/sec
            tank capacity 550 l
            total power requirement 28 kW
            weight of the machine ca. 16,6 t
            dimensions of the machine ca. 4,4x2,7x3,4 m
            Description :
            CNC control Infinitron
            Hydro cushion MHK 1-30
            Three-point die holder DH 1-30
            Stop system A2 with a travel range of 600 mm
            Adjustment of the stop slide along the stop bar by separate
            controlled Z-axes
            Sheet metal support system H 2
            Adjustment of the individual sheet metal support brackets through separately
            controlled W-axes
            Bracket SK 10 with lifting aid 0-45 ° with linear guide

            Current Video of the machine: https://youtu.be/kY_r29IbaQs


        • IMZ Maschinen Vertriebs GmbH
        • Marie-Curie-Straße 19
        • 73529 Schwäbisch Gmünd
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake HÄMMERLE BM 200-3100


          • MWB GmbH & CO. KG
          • Parkstraße 12
          • 09456 Annaberg-Buchholz
          • Deutschland

          • +49 3733 5068501
          • info@mwb-machinetrade.com
            https://www.mwb-machinetrade.com
          #2069-7839 · Hydr. pressbrake

          HÄMMERLE - BM 200-3100 - - 1997 - Infinitron

          Technical details
          pressure 200 t︱Control Infinitron ︱work height max. 1104 mm︱throat 250 mm︱table width 160 mm︱pre-running speed 2,67 mm/min︱work speed 0,001- 0,01 m/min︱return speed 2,67 mm/min︱tank capacity 550 l︱total power requirement 28 kW︱weight of the machine ca. 16,6 t︱dimensions of the machine ca. 4,4x2,7x3,4 m︱
          Hydro cushion MHK 1-30 Three-point die holder DH 1-30 Stop system A2 with a travel range of 600 mm Adjustment of the stop slide along the stop bar by separate controlled Z-axes Sheet metal support system H 2 Adjustment of the individual sheet metal support brackets by separately controlled W-axes Bracket SK 10 with lifting aid 0-45 ° with linear guide technical description Slim stand principle with 500 mm free passage. The stands are provided with swivel bearings on which the table is placed. On the one hand, the cylinders are screwed between the side stands and clearly positioned by means of wedges. On the other hand, the cylinders are bolted to the support at the front and rear, resulting in a stabilizing frame construction. The hydraulic tank is screwed between the side stands and contains all the block hydraulics for controlling the individual machine elements such as the tappet drive, tool clamping, die slide device, etc. The movement of the plunger is controlled by electronically controlled proportional valves, a gray scale being provided on each side of the plunger for precise measurement of the position. Both the parallel position and the exact lower action point position are controlled by the CNC control via the valves mentioned, with a stopping accuracy of 0 / - 0.01 mm being maintained at the bottom dead centre. The frame suspension (frame on suspension) is compensated on both sides by mounting the gray scales on separate supports that are attached directly to the table. The ram is rapidly advanced by ancestors under the influence of its own weight, whereby the press cylinders are supplied with oil by means of large suction valves. After the switchover point from the forward speed to the working speed has been reached, the plungers are supplied with oil from the main pump via the proportional valves. The steel press cylinders are double-acting, with the piston rods being connected to the ram by cambered supports and elastic intermediate links. A safety control independent of the electronics registers the parallel position of the ram and switches the machine off immediately if, due to a fault in the electronics of the ram, it does not remain in the parallel position. Otherwise, the dangerous functions of the hydraulics are automatically checked and secured in accordance with the latest accident prevention regulations. The electrical cabinet on the right side of the machine essentially contains the power section, the computer section and the safety section. The connections from the electrical box to the mechanical part are made using plug connections. The machine and accessories comply with the currently applicable provisions of Directive 89/392 / EEC (machines) amended by Directives 91/368 / EEC and 93/44 / EEC. The machine price includes the required side and rear protective grilles and two-hand operation with a safety stop.
            pressure 200 t
            Control Infinitron
            work height max. 1104 mm
            throat 250 mm
            table width 160 mm
            pre-running speed 2,67 mm/min
            work speed 0,001- 0,01 m/min
            return speed 2,67 mm/min
            tank capacity 550 l
            total power requirement 28 kW
            weight of the machine ca. 16,6 t
            dimensions of the machine ca. 4,4x2,7x3,4 m
            Description :
            Hydro cushion MHK 1-30
            Three-point die holder DH 1-30
            Stop system A2 with a travel range of 600 mm
            Adjustment of the stop slide along the stop bar by separate
            controlled Z-axes
            Sheet metal support system H 2
            Adjustment of the individual sheet metal support brackets by separately
            controlled W-axes
            Bracket SK 10 with lifting aid 0-45 ° with linear guide

            technical description

            Slim stand principle with 500 mm free passage. The stands are provided with
            swivel bearings on which the table is placed. On the one hand, the cylinders
            are screwed between the side stands and clearly positioned by means of wedges.
            On the other hand, the cylinders are bolted to the support at the front and
            rear, resulting in a stabilizing frame construction.

            The hydraulic tank is screwed between the side stands and contains all the
            block hydraulics for controlling the individual machine elements such as the
            tappet drive, tool clamping, die slide device, etc.

            The movement of the plunger is controlled by electronically controlled
            proportional valves, a gray scale being provided on each side of the plunger
            for precise measurement of the position. Both the parallel position and the
            exact lower action point position are controlled by the CNC control via the
            valves mentioned, with a stopping accuracy of 0 / - 0.01 mm being maintained at
            the bottom dead centre. The frame suspension (frame on suspension) is
            compensated on both sides by mounting the gray scales on separate supports that
            are attached directly to the table.

            The ram is rapidly advanced by ancestors under the influence of its own weight,
            whereby the press cylinders are supplied with oil by means of large suction
            valves. After the switchover point from the forward speed to the working speed
            has been reached, the plungers are supplied with oil from the main pump via the
            proportional valves.

            The steel press cylinders are double-acting, with the piston rods being
            connected to the ram by cambered supports and elastic intermediate links. A
            safety control independent of the electronics registers the parallel position
            of the ram and switches the machine off immediately if, due to a fault in the
            electronics of the ram, it does not remain in the parallel position. Otherwise,
            the dangerous functions of the hydraulics are automatically checked and secured
            in accordance with the latest accident prevention regulations.

            The electrical cabinet on the right side of the machine essentially contains
            the power section, the computer section and the safety section. The connections
            from the electrical box to the mechanical part are made using plug connections.

            The machine and accessories comply with the currently applicable provisions of
            Directive 89/392 / EEC (machines) amended by Directives 91/368 / EEC and 93/44 /
            EEC.

            The machine price includes the required side and rear protective grilles and
            two-hand operation with a safety stop.



        • MWB GmbH & CO. KG
        • Parkstraße 12
        • 09456 Annaberg-Buchholz
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake HÄMMERLE AP200-3100


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-H08822 · Hydr. pressbrake

          HÄMMERLE - AP200-3100 - - 1986/2011 retrofit - Addcobend Infinitron

          Technical details
          pressure 200 t︱chamfer lenght 3100 mm︱distance between columns 2780 mm︱Control Addcobend Infinitron ︱total power requirement kW︱weight of the machine ca. 18 t︱dimensions of the machine ca. m︱
          CNC control: Addcobend Infinitron Press force: 2000 KN Bending length: 3100 mm Distance between columns 2780 mm Clear distance between columns 2780 mm Projection of the stands 300 mm Back gauge - adjustable 1600 mm Stroke max. 400 mm Space required length 4300 mm Space requirement width 2650 mm Total height 3800mm Total weight about 18000 kg Machine hours 2011: 21226 h Machine hours today: approx. 23000-25000h Retrofit: 2011: approx. CHF 86,000 • Basic remodeling • Exchange Axodyn controller units (X & M axis) • Replacement of control relays and Telemecanique PLCs with safety PLCs • Replacement of power relays and thermal overcurrent trips • Double foot switch with additional function • Angle adapter for hand station suspension • Grid connection 2013: CHF 27,000 • 3D bendview post processor • 3D Bendview retrofit package • Exchange 3.5» floppy drive for USB interface • Software and License • 3D bend viewer software Tools included: 1. 001-002 sword stamp 3 meters 2. 7 matrix almost 3 meters 3. 12 matrix 3 meters 4. 16 matrix 3 meters 5. Possibly an embossing tool 3 meters
            pressure 200 t
            chamfer lenght 3100 mm
            distance between columns 2780 mm
            Control Addcobend Infinitron
            weight of the machine ca. 18 t
            Description :
            CNC control: Addcobend Infinitron
            Press force: 2000 KN
            Bending length: 3100 mm
            Distance between columns 2780 mm
            Clear distance between columns 2780 mm
            Projection of the stands 300 mm
            Back gauge - adjustable 1600 mm
            Stroke max. 400 mm
            Space required length 4300 mm
            Space requirement width 2650 mm
            Total height 3800mm
            Total weight about 18000 kg

            Machine hours 2011: 21226 h
            Machine hours today: approx. 23000-25000h

            Retrofit:
            2011: approx. CHF 86,000
            • Basic remodeling
            • Exchange Axodyn controller units (X & M axis)
            • Replacement of control relays and Telemecanique PLCs with safety PLCs
            • Replacement of power relays and thermal overcurrent trips
            • Double foot switch with additional function
            • Angle adapter for hand station suspension
            • Grid connection

            2013: CHF 27,000
            • 3D bendview post processor
            • 3D Bendview retrofit package
            • Exchange 3.5» floppy drive for USB interface
            • Software and License
            • 3D bend viewer software

            Tools included:
            1. 001-002 sword stamp 3 meters
            2. 7 matrix almost 3 meters
            3. 12 matrix 3 meters
            4. 16 matrix 3 meters
            5. Possibly an embossing tool 3 meters


        • Knops Werkzeugmaschinen
        • Konrad-Zuse-Straße 5
        • 40789 Monheim
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          Used sheet metal working machines at LagerMaschinen.de
          Get your used sheet metal working machines at LagerMaschinen.de

          Sheet metal working machines are machines used in the metalworking process involved in the production of sheet metal. Some of the types of used sheet metal working machines involved in this process are lathes roll slitters brake presses and stamping presses to name just a few. These used sheet metal working machines are used to cut bend flatten and otherwise manipulate metal into the desired shape and thickness. Used sheet metal working machines can be used to roll or bend sheet metal into a desired shape and to give the fold or curve the desired angle they can also be used to punch the sheet metal into the desired shape.

          Used sheet metal working machines for every application

          From small home production labs for hobbyists to large-scale production facilities LagerMaschinen.de has used sheet metal working machines for every use. For some precision is not necessarily the most important consideration when choosing used sheet metal working machines. For others the precision and the flexibility of the used sheet metal working machines is the most important consideration. Whether you need bending folding cutting pressing or punching machines you will find what you are looking for at LagerMaschinen.de

          Quality used machines at LagerMaschinen.de

          For many companies the cost of new equipment can be a source of problems. With its international network of suppliers LagerMaschinen.de ensures that your used sheet metal working machines meet your quality requirements and at the same time guarantees a price that is far more cost-effective than new machines.