European network of stockholding machinery dealers

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:

          Crank Press - Double Column

          Machinelist: Crank Press - Double Column


          Crank Press - Double Column

          used Presses Crank Press - Double Column SCHULER EBS 4-600-3,6-350


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-173051 · Crank Press - Double Column

          SCHULER - EBS 4-600-3,6-350 - - 2010 - Siemens S 7

          Technical details
          pressure 600 t︱distance between columns 3640 mm︱stroke fix 350 mm︱no. of strokes 11 - 44 /min︱dayligth (stroke and adjustment up) 1550 mm︱column travel -side 2200 mm︱table surface area 3600 x 2500 mm︱ram surface 3600 x 2500 mm︱ram adjustment 400 mm︱band width 2000 mm︱material thickness 0,6 - 2,5 mm︱material cross-cut 1600 x 2,5 mm²︱coil weight 35,0 t︱Number of Straightening rolls 13 0︱straightening roll diameter 50 mm︱
          Blanking / Cutting Line consisting of: - mechanical double column press make Schuler type EBS 4-600, yom 1993 2010: new control Siemens S 7 with infinitely variable drive, fly-wheel brake, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking - moving tables (2x) without rails for the moving tables - decoiler make Schleicher, type HE - 355 - 2100, yom 1994 with auxiliary drive, snubber roll - coil lifting device - extractor device make Schleicher - shear - straightening machine make Schnutz, type RME 18/50/13-2000 TZ, yom 1994 with infinitely variable drive, 30 intermediate rolls, 117 supporting rolls - coil loop bridge - roll feed make Schleicher, type WV-SYS-A 160-2000, yom 1994 - blank stacker NSM-Magnettechnik stored in dismantled condition - Video before dismantling available
            pressure 600 t
            distance between columns 3640 mm
            stroke fix 350 mm
            no. of strokes 11 - 44 /min
            dayligth (stroke and adjustment . 1550 mm
            column travel -side 2200 mm
            table surface area 3600 x 2500 mm
            ram surface 3600 x 2500 mm
            ram adjustment 400 mm
            band width 2000 mm
            material thickness 0,6 - 2,5 mm
            material cross-cut 1600 x 2,5 mm²
            coil weight 35,0 t
            Number of Straightening rolls 13 0
            straightening roll diameter 50 mm
            Description :
            Blanking / Cutting Line consisting of:
            - mechanical double column press make Schuler type EBS 4-600, yom 1993
            2010: new control Siemens S 7
            with infinitely variable drive, fly-wheel brake, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking
            - moving tables (2x) without rails for the moving tables
            - decoiler make Schleicher, type HE - 355 - 2100, yom 1994 with auxiliary drive, snubber roll
            - coil lifting device
            - extractor device make Schleicher
            - shear
            - straightening machine make Schnutz, type RME 18/50/13-2000 TZ, yom 1994 with infinitely variable drive, 30 intermediate rolls, 117 supporting rolls
            - coil loop bridge
            - roll feed make Schleicher, type WV-SYS-A 160-2000, yom 1994
            - blank stacker NSM-Magnettechnik
            stored in dismantled condition - Video before dismantling available


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Crank Press - Double Column SCHULER EBS 4-600-3,6-350


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-174004 · Crank Press - Double Column

          SCHULER - EBS 4-600-3,6-350 - - 2010 - Siemens S 7

          Technical details
          pressure 600 t︱stroke fix 350 mm︱no. of strokes 11 - 44 /min︱distance between columns 3640 mm︱dayligth (stroke and adjustment up) 1550 mm︱column travel -side 2200 mm︱table surface area 3600 x 2500 mm︱hole in the table mm︱die cushion capacity t︱die cushion stroke mm︱table height over floor mm︱ram surface 3600 x 2500 mm︱pressure of ram t︱stroke of drawing ram mm︱ram adjustment 400 mm︱material width mm︱material thickness mm︱material cross-cut mm²︱feed length mm︱power requirement kW︱
          year of manufacture: 1993 2010: new control Siemens S 7 with infinitely variable drive, fly-wheel brake, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking moving tables (2x) without rails for the moving tables
            pressure 600 t
            stroke fix 350 mm
            no. of strokes 11 - 44 /min
            distance between columns 3640 mm
            dayligth (stroke and adjustment . 1550 mm
            column travel -side 2200 mm
            table surface area 3600 x 2500 mm
            ram surface 3600 x 2500 mm
            ram adjustment 400 mm
            Description :
            year of manufacture: 1993
            2010: new control Siemens S 7
            with infinitely variable drive, fly-wheel brake, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking
            moving tables (2x) without rails for the moving tables


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Crank Press - Double Column BRET 2 PACK 25 B


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-163020 · Crank Press - Double Column

          BRET - 2 PACK 25 B - - 1994 - Siemens S 5

          Technical details
          pressure 250 t︱distance between columns 1650 / 1400 mm︱stroke fix 150 mm︱no. of strokes 30 - 75 Hub/min︱dayligth (stroke and adjustment up) 665 mm︱column travel -side 550 mm︱table surface area 1600 x 900 mm︱hole in the table 1000 x 300 mm︱table height over floor 980 mm︱ram surface 1400 x 900 mm︱power requirement 42,0 kW︱weight of the machine ca. 33,00 t︱required space 2,8 x 2,5 x 4,4 m︱
          permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, clutch/brake combination (Ortlinghaus), tool changing system, electronic roll feed (Normatic, AESL 500-2,8) distance table - ram without tool changing system approx. 765 mm can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F
            pressure 250 t
            distance between columns 1650 / 1400 mm
            stroke fix 150 mm
            no. of strokes 30 - 75 Hub/min
            dayligth (stroke and adjustment . 665 mm
            column travel -side 550 mm
            table surface area 1600 x 900 mm
            hole in the table 1000 x 300 mm
            table height over floor 980 mm
            ram surface 1400 x 900 mm
            power requirement 42,0 kW
            weight of the machine ca. 33,00 t
            required space 2,8 x 2,5 x 4,4 m
            Description :
            permitted for automatic mode according to the German Safety Regulations (UVV)
            with infinitely variable drive, clutch/brake combination (Ortlinghaus), tool changing system, electronic roll feed (Normatic, AESL 500-2,8)
            distance table - ram without tool changing system approx. 765 mm
            can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Crank Press - Double Column WEINGARTEN HU 2-500


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-173001 · Crank Press - Double Column

          WEINGARTEN - HU 2-500 - - 1985 - keine / Option neu

          Technical details
          pressure 500 t︱distance between columns 3100 mm︱stroke fix 300 mm︱no. of strokes 20 - 70 Hub/min︱dayligth (stroke and adjustment up) 1000 mm︱column travel -side 1400 mm︱table surface area 2800 x 1600 mm︱hole in the table mm︱table height over floor mm︱ram surface 2800 x 1450 mm︱power requirement 90,0 kW︱weight of the machine ca. 100,00 t︱required space 5,75 x 3,2 x 7,8 m︱ram adjustment 100 mm︱height over floor 6,4 mm︱
          permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment stored in dismantled condition in warehouse - can be offered without putting into operation (no PLC + main motor available) or alternatively with new control Siemens S 7-1500 F
            pressure 500 t
            distance between columns 3100 mm
            stroke fix 300 mm
            no. of strokes 20 - 70 Hub/min
            dayligth (stroke and adjustment . 1000 mm
            column travel -side 1400 mm
            table surface area 2800 x 1600 mm
            ram surface 2800 x 1450 mm
            power requirement 90,0 kW
            weight of the machine ca. 100,00 t
            required space 5,75 x 3,2 x 7,8 m
            ram adjustment 100 mm
            height over floor 6,4 mm
            Description :
            permitted for automatic mode according to the German Safety Regulations (UVV)
            with infinitely variable drive, pneumatic clutch (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment
            stored in dismantled condition in warehouse - can be offered without putting into operation (no PLC + main motor available) or alternatively with new control Siemens S 7-1500 F


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Crank Press - Double Column HAULICK RVD 160-1250 R


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-093056 · Crank Press - Double Column

          HAULICK - RVD 160-1250 R - - 1983 - konventionell

          Technical details
          pressure 160 t︱stroke fix 160 mm︱no. of strokes 30 - 120 /min︱distance between columns 1190 mm︱dayligth (stroke and adjustment up) 735 mm︱column travel -side 600 mm︱table surface area 1200 x 1000 mm︱hole in the table 500 x 300 mm︱table height over floor 900 mm︱ram surface 1000 x 800 mm︱ram adjustment 125 mm︱material width 550 mm︱material thickness 0 - 6,0 mm︱material cross-cut 1100 mm²︱feed length 350 mm︱power requirement 45,0 kW︱Weight 25,0 t︱dimensions of the machine ca. 2,3 x 2,1 x 4,7 mxmxm︱
          permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive (PIV), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking, mechanical pincer feed (Haulick, RS 350/550 SL 90) can only be offered without putting into operation
            pressure 160 t
            stroke fix 160 mm
            no. of strokes 30 - 120 /min
            distance between columns 1190 mm
            dayligth (stroke and adjustment . 735 mm
            column travel -side 600 mm
            table surface area 1200 x 1000 mm
            hole in the table 500 x 300 mm
            table height over floor 900 mm
            ram surface 1000 x 800 mm
            ram adjustment 125 mm
            material width 550 mm
            material thickness 0 - 6,0 mm
            material cross-cut 1100 mm²
            feed length 350 mm
            power requirement 45,0 kW
            Weight 25,0 t
            dimensions of the machine ca. 2,3 x 2,1 x 4,7 mxmxm
            Description :
            permitted for automatic mode according to the German Safety Regulations (UVV)
            with infinitely variable drive (PIV), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking, mechanical pincer feed (Haulick, RS 350/550 SL 90)
            can only be offered without putting into operation


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Crank Press - Double Column DREES VE 100/100


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-073112 · Crank Press - Double Column

          DREES - VE 100/100 - - 1980 - konventionell

          Technical details
          pressure 100 t︱stroke 20 - 200 mm︱no. of strokes 20 - 60 /min︱distance between columns 1230 mm︱dayligth (stroke and adjustment up) 650 mm︱column travel -side 540 mm︱table surface area 1050 x 750 mm︱table height over floor 760 mm︱ram surface 1000 x 750 mm︱ram adjustment 100 mm︱power requirement 18,0 kW︱Weight 20,5 t︱dimensions of the machine ca. 2,8 x 1,9 x 4,3 mxmxm︱
          permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with infinitely variable drive (PIV), pneumatic clutch, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment can be offered without putting into operation, with putting into operation or alternatively with new control Siemens S 7-1500 F
            pressure 100 t
            stroke 20 - 200 mm
            no. of strokes 20 - 60 /min
            distance between columns 1230 mm
            dayligth (stroke and adjustment . 650 mm
            column travel -side 540 mm
            table surface area 1050 x 750 mm
            table height over floor 760 mm
            ram surface 1000 x 750 mm
            ram adjustment 100 mm
            power requirement 18,0 kW
            Weight 20,5 t
            dimensions of the machine ca. 2,8 x 1,9 x 4,3 mxmxm
            Description :
            permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV)
            with infinitely variable drive (PIV), pneumatic clutch, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment
            can be offered without putting into operation, with putting into operation or alternatively with new control Siemens S 7-1500 F


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Crank Press - Double Column WEINGARTEN VK 500.34.85


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-113100 · Crank Press - Double Column

          WEINGARTEN - VK 500.34.85 - - 1974 - konventionell

          Technical details
          pressure 500 t︱distance between columns 1620 mm︱stroke 40 - 160 mm︱no. of strokes 32 / 48 Hub/min︱dayligth (stroke and adjustment up) 660 mm︱column travel -side 400 x 430 mm︱table surface area 1600 x 1300 mm︱hole in the table mm︱table height over floor 750 mm︱ram surface 1400 x 1200 mm︱power requirement 44,0 / 66,0 kW︱weight of the machine ca. 56,00 t︱required space 3,55 x 2,55 x 5,1 m︱ram adjustment 350 mm︱height over floor 8,3 mm︱height under floor 6,0 mm︱
          with link drive, hydraulic overload protection in ram, motoric ram adjustment, drawing cushion in table, 2x tool changing device stored in dismantled condition can only be offered without putting into operation
            pressure 500 t
            distance between columns 1620 mm
            stroke 40 - 160 mm
            no. of strokes 32 / 48 Hub/min
            dayligth (stroke and adjustment . 660 mm
            column travel -side 400 x 430 mm
            table surface area 1600 x 1300 mm
            table height over floor 750 mm
            ram surface 1400 x 1200 mm
            power requirement 44,0 / 66,0 kW
            weight of the machine ca. 56,00 t
            required space 3,55 x 2,55 x 5,1 m
            ram adjustment 350 mm
            height over floor 8,3 mm
            height under floor 6,0 mm
            Description :
            with link drive, hydraulic overload protection in ram, motoric ram adjustment, drawing cushion in table, 2x tool changing device
            stored in dismantled condition
            can only be offered without putting into operation


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Crank Press - Double Column DREES ZE 500/160


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-083149 · Crank Press - Double Column

          DREES - ZE 500/160 - - 1973 - konventionell

          Technical details
          pressure 500 t︱distance between columns 1620 mm︱stroke 40 - 160 mm︱no. of strokes 32 / 48 Hub/min︱dayligth (stroke and adjustment up) 660 mm︱column travel -side 400 x 430 mm︱table surface area 1600 x 1300 mm︱hole in the table mm︱table height over floor 750 mm︱ram surface 1400 x 1200 mm︱power requirement 44,0 / 66,0 kW︱weight of the machine ca. 56,00 t︱required space 3,55 x 2,55 x 5,1 m︱
          with pneumatic clutch/brake combination (Desch), mechanical overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment
            pressure 500 t
            distance between columns 1620 mm
            stroke 40 - 160 mm
            no. of strokes 32 / 48 Hub/min
            dayligth (stroke and adjustment . 660 mm
            column travel -side 400 x 430 mm
            table surface area 1600 x 1300 mm
            table height over floor 750 mm
            ram surface 1400 x 1200 mm
            power requirement 44,0 / 66,0 kW
            weight of the machine ca. 56,00 t
            required space 3,55 x 2,55 x 5,1 m
            Description :
            with pneumatic clutch/brake combination (Desch), mechanical overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Crank Press - Double Column RICHTER STZZRR 160


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-083144 · Crank Press - Double Column

          RICHTER - STZZRR 160 - - 1965 - konventionell

          Technical details
          pressure 160 t︱stroke 15 - 170 mm︱no. of strokes 15 - 40 /min︱distance between columns 2050 / 1900 mm︱dayligth (stroke and adjustment up) 690 mm︱column travel -side 800 mm︱table surface area 1600 x 800 mm︱hole in the table mm︱table height over floor 900 mm︱ram surface 1620 x 700 mm︱ram adjustment 140 mm︱power requirement 15,0 kW︱Weight 24,0 t︱dimensions of the machine ca. 3,3 x 2,3 x 5,3 mxmxm︱total height over floor 4,8 m︱height under floor 0,5 m︱
          permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch, pneumatic counterbalance in ram, motoric ram adjustment, two-hand and foot operation
            pressure 160 t
            stroke 15 - 170 mm
            no. of strokes 15 - 40 /min
            distance between columns 2050 / 1900 mm
            dayligth (stroke and adjustment . 690 mm
            column travel -side 800 mm
            table surface area 1600 x 800 mm
            table height over floor 900 mm
            ram surface 1620 x 700 mm
            ram adjustment 140 mm
            power requirement 15,0 kW
            Weight 24,0 t
            dimensions of the machine ca. 3,3 x 2,3 x 5,3 mxmxm
            total height over floor 4,8 m
            height under floor 0,5 m
            Description :
            permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV)
            with infinitely variable drive, pneumatic clutch, pneumatic counterbalance in ram, motoric ram adjustment, two-hand and foot operation


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact

          Double-Column Presse

          used Presses Double-Column Presse EDELHOFF HZP 100


          • Ambold Pressen GmbH
          • Sommeritzer Straße 43
          • 04626 Schmölln
          • Deutschland

          • +49 (0)3449183314
            +49 (0)3449123492
          • info@ambold-pressen.de
            www.ambold-pressen.de
          #1010-549 · Double-Column Presse

          EDELHOFF - HZP 100 - - 1980 -

          Technical details
          pressure 100 t︱distance between columns - mm︱stroke 350 mm︱table size 1150 x 700 mm︱total power requirement 11 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          - cutting impact dampening - die cushion - without electrical cabinet
            pressure 100 t
            distance between columns - mm
            stroke 350 mm
            table size 1150 x 700 mm
            total power requirement 11 kW
            Description :
            - cutting impact dampening
            - die cushion
            - without electrical cabinet


        • Ambold Pressen GmbH
        • Sommeritzer Straße 43
        • 04626 Schmölln
        • Deutschland

        • Datasheet
          Request / Contact

          Hydraulic Press

          used Presses Hydraulic Press MAE S 10 S


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-06089 · Hydraulic Press

          MAE - S 10 S - - unbekannt -

          Technical details
          .52965 ︱pressure 10 t︱oil contents 110 Liter
          ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
            .
            52965
            pressure 10 t
            oil contents 110 Liter
            Description :

            ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
            Please note:
            The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.
            Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.
            ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++


        • Christoph Busch GmbH
        • Dieselstr. 22
        • 41352 Korschenbroich
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Hydraulic Press WEBER PW 20 GSD


          • EnTeHa GmbH & Co.KG
          • Im Wollenklingen 6
          • 69517 Gorxheimertal
          • Deutschland

          • +49 6201 2630 545
          • info@enteha.de
            www.enteha.de
          #2081-5415 · Hydraulic Press

          WEBER - PW 20 GSD - - unbekannt -

          Technical details
          pressure 20 t︱distance between columns 220 mm︱stroke 50 mm︱total power requirement 0 kW︱weight of the machine ca. 0,17 t︱dimensions of the machine ca. 0,4 x 0,5 x 1 m︱
            pressure 20 t
            distance between columns 220 mm
            stroke 50 mm
            weight of the machine ca. 0,17 t
            dimensions of the machine ca. 0,4 x 0,5 x 1 m


        • EnTeHa GmbH & Co.KG
        • Im Wollenklingen 6
        • 69517 Gorxheimertal
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Hydraulic Press NEEF EP 80


          • G. FOLMER Industriebedarf
          • Mangenbergerstr. 347
          • 42655 Solingen
          • Deutschland

          • +49 21241071
            +49 21241276
          • folmer.maschinen@t-online.de
          #2010-1031 · Hydraulic Press

          NEEF - EP 80 - - 2001 -

          Technical details
          Neff EP 80 ︱pressure 80 t︱stroke 200 mm︱
            Neff EP 80
            pressure 80 t
            stroke 200 mm


        • G. FOLMER Industriebedarf
        • Mangenbergerstr. 347
        • 42655 Solingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Hydraulic Press G + K SI 40/50


          • EnTeHa GmbH & Co.KG
          • Im Wollenklingen 6
          • 69517 Gorxheimertal
          • Deutschland

          • +49 6201 2630 545
          • info@enteha.de
            www.enteha.de
          #2081-4105 · Hydraulic Press

          G + K - SI 40/50 - - 2000 -

          Technical details
          pressure 60 t︱distance between columns 550 mm︱stroke 150 mm︱total power requirement 11 kW︱weight of the machine ca. 5 t︱dimensions of the machine ca. 3 y 3 x 2,5 m︱
          Hydraulic rivet press Pressure force max. 600 kNRam stroke 150 mmWeight approx. 4500 kg Table 500 x 400 mm
            pressure 60 t
            distance between columns 550 mm
            stroke 150 mm
            total power requirement 11 kW
            weight of the machine ca. 5 t
            dimensions of the machine ca. 3 y 3 x 2,5 m
            Description :
            Hydraulic rivet press

            Pressure force max. 600 kNRam stroke 150 mmWeight approx. 4500 kg
            Table 500 x 400 mm




        • EnTeHa GmbH & Co.KG
        • Im Wollenklingen 6
        • 69517 Gorxheimertal
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Hydraulic Press RÖCHER RZP 160.21 SS


          • AS Maschinenhandel
          • Welserstr. 10e
          • 51149 Köln
          • Deutschland

          • +49 (0)22031864856
            +49 (0)22031864857
          • mail@asmaschinenhandel.de
            www.asmaschinenhandel.de
          #2044-100123 · Hydraulic Press

          RÖCHER - RZP 160.21 SS - - 1998 -

          Technical details
          pressure 160 t︱dayligth 500 mm︱distance between columns mm︱stroke 400 mm︱Control ︱draw back pressure 24 t︱table-size 1000x800 mm︱total power requirement 65 kW︱weight of the machine ca. 17 t︱dimensions of the machine ca. m︱
            pressure 160 t
            dayligth 500 mm
            stroke 400 mm
            draw back pressure 24 t
            table-size 1000x800 mm
            total power requirement 65 kW
            weight of the machine ca. 17 t


        • AS Maschinenhandel
        • Welserstr. 10e
        • 51149 Köln
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Hydraulic Press SIEMPELKAMP unbekannt


          • Maschinen Schwartpaul GmbH
          • Am Wasserwerk 1
          • 58840 Plettenberg
          • Deutschland

          • +49 (0)2391-95960
            +49 (0)2391-959620
          • info@maschinen-schwartpaul.de
            www.maschinen-schwartpaul.de
          #2020-15675 · Hydraulic Press

          SIEMPELKAMP - unbekannt - - 1996 -

          Technical details
          pressure 250 t︱distance between columns 0 mm︱stroke 0 mm︱total power requirement 0 kW︱weight of the machine ca. 0 t︱dimensions of the machine ca. 0 m︱
            pressure 250 t


        • Maschinen Schwartpaul GmbH
        • Am Wasserwerk 1
        • 58840 Plettenberg
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Hydraulic Press MÜLLER-WEINGARTEN PUK 2000-10.1.2


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-15810 · Hydraulic Press

          MÜLLER-WEINGARTEN - PUK 2000-10.1.2 - - 1987 -

          Technical details
          ram capacity 2000 t︱return capacity 150 t︱table-size 1015 x 1050 mm︱ram head dimension 975 x 1050 mm︱dist. between pillars (left to right) 975 mm︱dayligth 1000 mm︱distance table/ram 600 - 1000 mm︱ram stroke 400 mm︱table height over floor 800 mm︱height over floor 3650 mm︱Table ejector 63 KN︱Ram ejector 650 KN︱Table ejector stroke 100 mm︱Ram ejector stroke 100 mm︱Lenght of ram slide guiding 1400 mm︱ ︱Idle speed downward 235 mm/s︱working feed max. 20 mm/sec︱Working speed at 10000 KN 14 mm/s︱Working speed at 20000 KN 5 mm/s︱
          sizing press with oil-hydraulic drive, hydr. and electrical control depending on UVV, light barrier (Comp. Sick), ejector in table and pusher!
            ram capacity 2000 t
            return capacity 150 t
            table-size 1015 x 1050 mm
            ram head dimension 975 x 1050 mm
            dist. between pillars (left to r. 975 mm
            dayligth 1000 mm
            distance table/ram 600 - 1000 mm
            ram stroke 400 mm
            table height over floor 800 mm
            height over floor 3650 mm
            Table ejector 63 KN
            Ram ejector 650 KN
            Table ejector stroke 100 mm
            Ram ejector stroke 100 mm
            Lenght of ram slide guiding 1400 mm
            Idle speed downward 235 mm/s
            working feed max. 20 mm/sec
            Working speed at 10000 KN 14 mm/s
            Working speed at 20000 KN 5 mm/s
            Description :
            sizing press with oil-hydraulic drive, hydr. and electrical control depending on UVV, light barrier (Comp. Sick), ejector in table and pusher!



        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Hydraulic Press GALDABINI 500t


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-20017 · Hydraulic Press

          GALDABINI - 500t - - 1983/2008 -

          Technical details
          pressure 500 t︱distance between columns . mm︱stroke 1100 mm︱daylight 1500 mm︱table surface area 1250 x 2000 mm︱total power requirement 55 kW︱weight of the machine ca. 48 t︱dimensions of the machine ca. m︱
          hydraulic press in 2008 generally retrofitted equipped with: - SIEMENS PLC (Simatic) - cushons in table, force 160t - CE
            pressure 500 t
            distance between columns . mm
            stroke 1100 mm
            daylight 1500 mm
            table surface area 1250 x 2000 mm
            total power requirement 55 kW
            weight of the machine ca. 48 t
            Description :
            hydraulic press
            in 2008 generally retrofitted
            equipped with:
            - SIEMENS PLC (Simatic)
            - cushons in table, force 160t
            - CE


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Hydraulic Press MÜLLER WEINGARTEN SD63.11.25


          • AS Maschinenhandel
          • Welserstr. 10e
          • 51149 Köln
          • Deutschland

          • +49 (0)22031864856
            +49 (0)22031864857
          • mail@asmaschinenhandel.de
            www.asmaschinenhandel.de
          #2044-10055 · Hydraulic Press

          MÜLLER WEINGARTEN - SD63.11.25 - - 1979 -

          Technical details
          pressure 63 t︱distance between columns 0 mm︱stroke 160 mm︱table surface area 630 x 500 mm︱dayligth 400 mm︱total power requirement kW︱weight of the machine ca. 5 t︱dimensions of the machine ca. m︱
            pressure 63 t
            stroke 160 mm
            table surface area 630 x 500 mm
            dayligth 400 mm
            weight of the machine ca. 5 t


        • AS Maschinenhandel
        • Welserstr. 10e
        • 51149 Köln
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Hydraulic Press FISCHER HAKS 10/3200 (UVV)


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-15527 · Hydraulic Press

          FISCHER - HAKS 10/3200 (UVV) - - 1975/1993 -

          Technical details
          pressure 100 t︱column arm 450 mm︱stroke 170 mm︱table surface area 3200 x 800 mm︱return speed 150 mm/sec︱feed up 150 mm/sec︱feed down 50 mm/sec︱working feed 7 mm/sec︱table height over floor 850 mm︱ram surface 3220 x 800 mm︱flute distance 500 ︱T-slots 6 x 18mm ︱power capacity 20 kW︱oil volume ca. 600 l︱dimensions of the machine ca. 3,70 x 2,40 x 2,60 m︱weight of the machine ca. 15,5 gew. t︱
            pressure 100 t
            column arm 450 mm
            stroke 170 mm
            table surface area 3200 x 800 mm
            return speed 150 mm/sec
            feed up 150 mm/sec
            feed down 50 mm/sec
            working feed 7 mm/sec
            table height over floor 850 mm
            ram surface 3220 x 800 mm
            flute distance 500
            T-slots 6 x 18mm
            power capacity 20 kW
            oil volume ca. 600 l
            dimensions of the machine ca. 3,70 x 2,40 x 2,60 m
            weight of the machine ca. 15,5 gew. t


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Hydraulic Press EITEL T 6.3


          • EnTeHa GmbH & Co.KG
          • Im Wollenklingen 6
          • 69517 Gorxheimertal
          • Deutschland

          • +49 6201 2630 545
          • info@enteha.de
            www.enteha.de
          #2081-4877 · Hydraulic Press

          EITEL - T 6.3 - - 1973 -

          Technical details
          pressure 6 t︱distance between columns - mm︱stroke - mm︱total power requirement - kW︱weight of the machine ca. 1 t︱dimensions of the machine ca. 1 x 1 x 2 m︱
            pressure 6 t
            distance between columns - mm
            stroke - mm
            total power requirement - kW
            weight of the machine ca. 1 t
            dimensions of the machine ca. 1 x 1 x 2 m


        • EnTeHa GmbH & Co.KG
        • Im Wollenklingen 6
        • 69517 Gorxheimertal
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Hydraulic Press MAN 720 t


          • G. FOLMER Industriebedarf
          • Mangenbergerstr. 347
          • 42655 Solingen
          • Deutschland

          • +49 21241071
            +49 21241276
          • folmer.maschinen@t-online.de
          #2010-975 · Hydraulic Press

          MAN - 720 t - - 1957 -

          Technical details
          pressure 720 t︱stroke 15 mm︱total power requirement 3 kW︱weight of the machine ca. 5 t︱dimensions of the machine ca. 1300 x 1800 x 2200 m︱
            pressure 720 t
            stroke 15 mm
            total power requirement 3 kW
            weight of the machine ca. 5 t
            dimensions of the machine ca. 1300 x 1800 x 2200 m


        • G. FOLMER Industriebedarf
        • Mangenbergerstr. 347
        • 42655 Solingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Hydraulic Press EBA P8000


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-PE253 · Hydraulic Press

          EBA - P8000 - - -

          Technical details
          -
          Paper press Capacity: 8 T Paper package size: 600 x 500 x 450 mm.
            -
            Description :
            Paper press
            Capacity: 8 T
            Paper package size: 600 x 500 x 450 mm.




        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Presses Hydraulic Press JENNY E 63


          • Marcels Maschinen AG
          • Anthoptstrasse 11
          • 8222 Beringen (Schaffhausen)
          • Schweiz

          • (0041) 44 872 3400
            (0041) 44 872 3403
          • info@marcels-maschinen.ch
            http://www.marcels-maschinen.ch
          #1065-3906 · Hydraulic Press

          JENNY - E 63 - - -

          Technical details
          pressure 63 t︱distance between columns 360 mm︱stroke 400 mm︱weight of the machine ca. 4 t︱dimensions of the machine ca. 1.8x1.6x2.7 m︱
          www.marcels-maschinen.ch
            pressure 63 t
            distance between columns 360 mm
            stroke 400 mm
            weight of the machine ca. 4 t
            dimensions of the machine ca. 1.8x1.6x2.7 m
            Description :

            www.marcels-maschinen.ch


        • Marcels Maschinen AG
        • Anthoptstrasse 11
        • 8222 Beringen (Schaffhausen)
        • Schweiz

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          •   
          •