European network of stockholding machinery dealers

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:

          Presses

          Machinelist: Presses


          Double-Column Presse

          used Presses Double-Column Presse DIEFFENBACHER PD 500 (UVV)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-163039V · Double-Column Presse

          DIEFFENBACHER - PD 500 (UVV) - - 1991 - konventionell

          Technical details
          pressure 500 t︱distance between columns 1910 mm︱stroke 500 mm︱Distance table/ram, max. stroke up, adjustment up 700 mm︱table surfache without cutting impact cushions 1910 x 1360 mm︱table surfache with cutting impact cushions 1600 x 1360 mm︱table height over floor 800 mm︱ram surface 1600 x 1270 mm︱Side window 600 mm︱speed down 400 mm/s︱speed up 330 mm/s︱working speed 10 - 28 mm/s︱oil volume 1200 l︱power requirement 60,0 kW︱weight 40,0 t︱Dimensions (WxDxH) 3,6 x 2,5 x 5,0 m︱height over floor 4,5 m︱
          permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, cutting impact cushioning, two-hand operation table size depending on cutting impact devices: - without approx. 1910 x 1360 mm - with approx. 1600 x 1360 mm can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F
            pressure 500 t
            distance between columns 1910 mm
            stroke 500 mm
            Distance table/ram, max. stroke . 700 mm
            table surfache without cutting i. 1910 x 1360 mm
            table surfache with cutting impa. 1600 x 1360 mm
            table height over floor 800 mm
            ram surface 1600 x 1270 mm
            Side window 600 mm
            speed down 400 mm/s
            speed up 330 mm/s
            working speed 10 - 28 mm/s
            oil volume 1200 l
            power requirement 60,0 kW
            weight 40,0 t
            Dimensions (WxDxH) 3,6 x 2,5 x 5,0 m
            height over floor 4,5 m
            Description :
            permitted for manual loading according to the German Safety Regulations (UVV)
            with oil-hydraulic drive, cutting impact cushioning, two-hand operation
            table size depending on cutting impact devices:
            - without approx. 1910 x 1360 mm
            - with approx. 1600 x 1360 mm
            can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Double-Column Presse DIEFFENBACHER PO 1000 A (UVV)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-063001 · Double-Column Presse

          DIEFFENBACHER - PO 1000 A (UVV) - - 1979 - konventionell

          Technical details
          pressure 1000 t︱distance between columns 3030 mm︱stroke 350 mm︱Distance table/ram, max. stroke up, adjustment up 1400 mm︱table surface area 3000 x 2000 mm︱table height over floor 430 mm︱side window 1450 x 1400 mm︱ram surface 3000 x 2000 mm︱speed down 300 mm/s︱speed up 340 mm/s︱working speed 18 - 44 mm/s︱return capacity 120 t︱oil volume 4400 l︱width with platform 4950 mm︱power capacity 2 x 90,0 + 10,0 kW︱weight 87,0 t︱Dimensions (WxDxH) 4,35 x 3,65 x 7,55 m︱height over floor 6,05 m︱height beneath floor 1,5 m︱
          permitted for manual loading according to the German Safety Regulations (UVV) with oilhydraulic drive, controllable dependent on pressure/time and way, ram interlocking, two-hand operation stored in partly dismantled condition - can only be offered without putting into operation
            pressure 1000 t
            distance between columns 3030 mm
            stroke 350 mm
            Distance table/ram, max. stroke . 1400 mm
            table surface area 3000 x 2000 mm
            table height over floor 430 mm
            side window 1450 x 1400 mm
            ram surface 3000 x 2000 mm
            speed down 300 mm/s
            speed up 340 mm/s
            working speed 18 - 44 mm/s
            return capacity 120 t
            oil volume 4400 l
            width with platform 4950 mm
            power capacity 2 x 90,0 + 10,0 kW
            weight 87,0 t
            Dimensions (WxDxH) 4,35 x 3,65 x 7,55 m
            height over floor 6,05 m
            height beneath floor 1,5 m
            Description :
            permitted for manual loading according to the German Safety Regulations (UVV)
            with oilhydraulic drive, controllable dependent on pressure/time and way, ram interlocking, two-hand operation
            stored in partly dismantled condition - can only be offered without putting into operation


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Double-Column Presse DIEFFENBACHER PO 2000 (1000)


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-903 · Double-Column Presse

          DIEFFENBACHER - PO 2000 (1000) - - 1978 -

          Technical details
          pressure 2000 /1000* t︱distance between columns 2650 mm︱stroke 500 mm︱column travel -side 500 x 1000 mm︱diameter of piston 710 mm︱number of pistons 2 ︱distance between table / ram 1000 mm︱operating pressure 130 / 230 bar︱dayligth 800 mm︱table length 2500 mm︱table width 1600 mm︱table height 250 mm︱draw back pressure 500 kN︱number of T-slots 8 ︱turning speeds 1500 U/min︱rapid speed 120 - 140 mm/min︱closing speed max. 120 - 140 mm/sec.︱return of plunger by small single cylinders 100 - 110 mm/sec︱hydraulical ram locking ︱cutting sound absorber 300 t︱
          1991 assembly of a die cushion, pressure reduction to 1000 tons reason: tools were only constructed to 1000 tons press has run in a perfect condition until disassembly. It was replaced by a press line. important for UVV: press has a hydraulic ram locking!
            pressure 2000 /1000* t
            distance between columns 2650 mm
            stroke 500 mm
            column travel -side 500 x 1000 mm
            diameter of piston 710 mm
            number of pistons 2
            distance between table / ram 1000 mm
            operating pressure 130 / 230 bar
            dayligth 800 mm
            table length 2500 mm
            table width 1600 mm
            table height 250 mm
            draw back pressure 500 kN
            number of T-slots 8
            turning speeds 1500 U/min
            rapid speed 120 - 140 mm/min
            closing speed max. 120 - 140 mm/sec.
            return of plunger by small singl. 100 - 110 mm/sec
            cutting sound absorber 300 t
            Description :
            1991 assembly of a die cushion, pressure reduction to 1000 tons
            reason: tools were only constructed to 1000 tons
            press has run in a perfect condition until disassembly. It was replaced by a press line.

            important for UVV: press has a hydraulic ram locking!




        • WeMa Antonius Pigge GmbH
        • Barnstorfer Str. 3
        • 49424 Goldenstedt
        • Deutschland

        • Datasheet
          Request / Contact

          Four Column Press - Hydraulic

          used Presses Four Column Press - Hydraulic DIEFFENBACHER PU5 330A


          • Valk Machines BV
          • Kadijk 6
          • 8531XD Lemmer
          • Niederlande

          • +31 514562904
          • sales@valkmachines.com
            www.valkmachines.com
          #2079-33 · Four Column Press - Hydraulic

          DIEFFENBACHER - PU5 330A - - -

          Technical details
          ︱passage width 1500 mm︱ ︱total power requirement kW︱weight of the machine ca. 18 t︱required space m︱
          Capacity 300 Ton Table size 1.500 x 1.500 mm Adjustable stroke 500 - 1.000 mm Piston ø 400 mm Distance table -> ram: Minimum: 500 mm Maximal: 1.500 mm Machine height 4.000 mm Under ground 1.000 mm Above ground 3.000 mm Machine weight 18.600 kg
            passage width 1500 mm
            weight of the machine ca. 18 t
            Description :
            Capacity 300 Ton
            Table size 1.500 x 1.500 mm
            Adjustable stroke 500 - 1.000 mm
            Piston ø 400 mm

            Distance table -> ram:
            Minimum: 500 mm
            Maximal: 1.500 mm

            Machine height 4.000 mm
            Under ground 1.000 mm
            Above ground 3.000 mm
            Machine weight 18.600 kg


        • Valk Machines BV
        • Kadijk 6
        • 8531XD Lemmer
        • Niederlande

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          Find the perfect presses for your needs at LagerMaschinen
          Presses are multi-function tools for home or business

          The umbrella term press encompasses a wide range of different machines with an enormous array of functions. Presses can be used for the shaping, cutting, and punching of a variety of different materials. Whether youre in the market for a small manually-operated press for your home workshop or a massive industrial press for your business, you can easily find the most suitable machine for your specifications quickly and easily using LagerMaschinens online marketplace of used machines.

          Find the right used machines for you at LagerMaschinen

          From the publishing industry to the automotive sector, presses play a crucial role in the forming and finishing of products. Presses can be used to shape heavy material, imprint papers and plastic or cut and form metal, such as in coin production. For control and precision, look for used manually-operated presses. For mass-production, CNC operated presses offer quality and efficiency. No matter what your needs are, you can find used presses and more at LagerMaschinen.

          Investing in used machines is a business-savvy plan

          Buying used machines is a practical solution to the budgetary woes of buying equipment for your home or business. When you invest in used machines you get the quality you demand as a price you can afford. The machine marketplace offered by LagerMaschinen is a user-friendly forum for buying and selling used machines. Presses, lathes, grinders and more can be searched for and filtered by location, price or brand, ensuring a hassle-free shopping process from the comfort of your home or office.