European network of stockholding machinery dealers

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:

          Cold Circular Saw - Vertical

          Machinelist: Cold Circular Saw - Vertical


          Bandsaw - Horizontal

          used Saws Bandsaw - Horizontal MEP SHARK 512 SXI EVO


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66330 · Bandsaw - Horizontal

          MEP - SHARK 512 SXI EVO - - NEU -

          Technical details
          cutting diameter 330 mm︱capacity 90 degrees: flat 510 x 320 mm︱capacity 90 degrees: square 320 x 320 mm︱turning speed range: 40 / 80 m/min︱dimensions of saw-band 3440 x 27 x 0,9 mm︱engine output 1,5 / 1,8 kW︱weight 670 kg︱
          Semi-automatic, electro-hydraulic band saw machine for cutting 60° left to 60° right. Versatile machine with a tape of 4640 x 34 x 1.1 mm for the Cutting pipes, profiles and beams up to a maximum cutting range from 510x320 mm to 0°. The control console on a swiveling arm allows for comfortable and safe operation from any position. Electronic inverter for continuous belt speed regulation from 15 to 100 m/min. Large turntable with a diameter of 280 mm and engraved exact fine scaling, easily adjustable and stored.
            cutting diameter 330 mm
            capacity 90 degrees: flat 510 x 320 mm
            capacity 90 degrees: square 320 x 320 mm
            turning speed range: 40 / 80 m/min
            dimensions of saw-band 3440 x 27 x 0,9 mm
            engine output 1,5 / 1,8 kW
            weight 670 kg
            Description :
            Semi-automatic, electro-hydraulic band saw machine for cutting
            60° left to 60° right.
            Versatile machine with a tape of 4640 x 34 x 1.1 mm for the
            Cutting pipes, profiles and beams up to a maximum cutting range
            from 510x320 mm to 0°.
            The control console on a swiveling arm allows for comfortable and
            safe operation from any position.
            Electronic inverter for continuous belt speed regulation
            from 15 to 100 m/min.
            Large turntable with a diameter of 280 mm and engraved
            exact fine scaling, easily adjustable and stored.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal MEP SHARK 332-1 SXI EVO


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66328 · Bandsaw - Horizontal

          MEP - SHARK 332-1 SXI EVO - - NEU -

          Technical details
          cutting diameter 300 mm︱capacity 90 degrees: flat 330 x 260 mm︱capacity 90 degrees: square 260 x 260 mm︱capacity 45 degrees: flat 270 x 200 mm︱capacity 45 degrees: round 260 mm︱capacity 45 degrees: square 250 x 250 mm︱capacity 60 degrees: flat 170 x 170 mm︱capacity 60 degrees: square 170 x 170 mm︱capacity 60 degrees: round 180 mm︱turning speed range: 40 / 80 m/min︱dimensions of saw-band 3320 x 27 x 0,9 mm︱engine output 1,5 / 1,8 kW︱weight 670 kg︱
          Electro-hydraulic semi-automatic band saw SHARK 332 SXI EVO with semi-automatic-dynamic, manual function, has a MEP-28 control for miter cuts from 45° right to 60° left. Some features: New centralized switch console on an articulated arm. Low voltage control panel: Polyester membrane keyboard with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in the user language) * Alarms (description of alarm causes) * State of inputs and outputs * Counting cuts * Time taken for the cut made * Current consumption of the saw blade motor * Saw blade tension * Blade speed * Numerical display of head position. Switch handle IP55 of manual 24V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for special ones Applications New, latest generation hydraulic control unit, extremely powerful and with low energy consumption. Turntable (on roller bearings of 420 mm with preloaded thrust bearings assembled). Double belt speed (40/80 m/min.) with control Intended to accommodate an electronic inverter for the Continuous regulation of the belt speed from 20 to 90 m/min. Stroke of the saw bow can be programmed directly from the control panel Adaptation to the cutting material. Clamping device can be moved laterally to the left and right Quick release vice. Manually operated strap tension control with display on the screen electronic converter. Base designed to completely contain the coolant, even with maximum angle cuts. The coolant pan (provided with an electric pump for lubrication and Cooling of the saw band) and the chip drawer (can be replaced by a Chip conveyor to be replaced - see special accessories) are in the base frame built-in. Preparation for installing the minimum blade lubrication kit (Optional, in addition to the conventional standard lubrication with emulsion oil. Chip clearing brush. The machine is intended for pallet truck transport. Adjustable length stop for cuts of the same length Material support arm with roller for attaching the loading platform Bimetal saw band for solid and profile material. Tools and instructions for use in the respective user language.
            cutting diameter 300 mm
            capacity 90 degrees: flat 330 x 260 mm
            capacity 90 degrees: square 260 x 260 mm
            capacity 45 degrees: flat 270 x 200 mm
            capacity 45 degrees: round 260 mm
            capacity 45 degrees: square 250 x 250 mm
            capacity 60 degrees: flat 170 x 170 mm
            capacity 60 degrees: square 170 x 170 mm
            capacity 60 degrees: round 180 mm
            turning speed range: 40 / 80 m/min
            dimensions of saw-band 3320 x 27 x 0,9 mm
            engine output 1,5 / 1,8 kW
            weight 670 kg
            Description :
            Electro-hydraulic semi-automatic band saw SHARK 332 SXI EVO with
            semi-automatic-dynamic, manual function, has a MEP-28 control
            for miter cuts from 45° right to 60° left.
            Some features:
            New centralized switch console on an articulated arm.
            Low voltage control panel:
            Polyester membrane keyboard with thermoformed highlighted
            Push buttons and actuation control signal.
            Display to show:
            * Diagnostics (messages in the user language)
            * Alarms (description of alarm causes)
            * State of inputs and outputs
            * Counting cuts
            * Time taken for the cut made
            * Current consumption of the saw blade motor
            * Saw blade tension
            * Blade speed
            * Numerical display of head position.
            Switch handle IP55 of manual 24V cycle.
            Complete program of all special cutting cycles.
            Identification of other possible special cutting cycles for special ones
            Applications
            New, latest generation hydraulic control unit, extremely powerful
            and with low energy consumption.
            Turntable (on roller bearings of 420 mm with preloaded thrust bearings
            assembled).
            Double belt speed (40/80 m/min.) with control
            Intended to accommodate an electronic inverter for the
            Continuous regulation of the belt speed from 20 to 90 m/min.
            Stroke of the saw bow can be programmed directly from the control panel
            Adaptation to the cutting material.
            Clamping device can be moved laterally to the left and right
            Quick release vice.
            Manually operated strap tension control with display on the screen
            electronic converter.
            Base designed to completely contain the coolant,
            even with maximum angle cuts.
            The coolant pan (provided with an electric pump for lubrication and
            Cooling of the saw band) and the chip drawer (can be replaced by a
            Chip conveyor to be replaced - see special accessories) are in the base
            frame
            built-in.
            Preparation for installing the minimum blade lubrication kit
            (Optional, in addition to the conventional standard lubrication with
            emulsion oil.
            Chip clearing brush.
            The machine is intended for pallet truck transport.
            Adjustable length stop for cuts of the same length
            Material support arm with roller for attaching the loading platform
            Bimetal saw band for solid and profile material.
            Tools and instructions for use in the respective user language.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal MEP SHARK 382-1 SXI EVO


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66329 · Bandsaw - Horizontal

          MEP - SHARK 382-1 SXI EVO - - NEU -

          Technical details
          cutting diameter 280 mm︱capacity 90 degrees: flat 380 x 260 mm︱capacity 90 degrees: square 260 x 260 mm︱turning speed range: 40 / 80 m/min︱dimensions of saw-band 3440 x 27 x 0,9 mm︱engine output 1,5 / 1,8 kW︱weight 670 kg︱
          Electro-hydraulic, semi-automatic band saw with additional manual and semi-automatic-dynamic function, for cuts from 45° right to 60° left. Some features: Pivoting control panel on vertical post. 420 mm large rotary table on roller bearings with preloaded thrust bearing and replaceable steel inserts. Double belt speed (40/80 m/min.)
            cutting diameter 280 mm
            capacity 90 degrees: flat 380 x 260 mm
            capacity 90 degrees: square 260 x 260 mm
            turning speed range: 40 / 80 m/min
            dimensions of saw-band 3440 x 27 x 0,9 mm
            engine output 1,5 / 1,8 kW
            weight 670 kg
            Description :
            Electro-hydraulic, semi-automatic band saw with additional manual and
            semi-automatic-dynamic function, for cuts from 45° right to 60° left.
            Some features:
            Pivoting control panel on vertical post.
            420 mm large rotary table on roller bearings with preloaded thrust bearing
            and replaceable steel inserts.
            Double belt speed (40/80 m/min.)


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal OPTIMUM S 275 NV


          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland

          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-S275NV · Bandsaw - Horizontal

          OPTIMUM - S 275 NV - - NEU -

          Technical details
          cutting diameter 225 mm︱saw band length 2480 mm︱cutting width 160 mm︱dimensions of saw-band 2480 x 27 x 0,9 mm︱mitter cutting 60 °︱cutting speed 20 - 90 m/min︱power capacity 1,5 kW︱voltage 230 V︱coolant ︱total power requirement 1,6 kW︱weight of the machine ca. 200 kg︱dimensions of the machine ca. 0,70 x 1,40 x 1,40 m︱
          - stepless speed - stepless feed - miter cut - Bi-metal saw band - Material stop - Machine base - Coolant device
            cutting diameter 225 mm
            saw band length 2480 mm
            cutting width 160 mm
            dimensions of saw-band 2480 x 27 x 0,9 mm
            mitter cutting 60 °
            cutting speed 20 - 90 m/min
            power capacity 1,5 kW
            voltage 230 V
            total power requirement 1,6 kW
            weight of the machine ca. 200 kg
            dimensions of the machine ca. 0,70 x 1,40 x 1,40 m
            Description :
            - stepless speed
            - stepless feed
            - miter cut
            - Bi-metal saw band
            - Material stop
            - Machine base
            - Coolant device


        • Kirchgeorg Werkzeugmaschinen
        • Frankfurter Straße 141
        • 63303 Dreieich-Sprendlingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal BAUER S 350


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-052124 · Bandsaw - Horizontal

          BAUER - S 350 - - ca. 1980 -

          Technical details
          cutting diameter 350 mm︱saw band length 3900 mm︱cutting width 450 mm︱ 350 mm︱capacity 90 degrees: flat 450 x 280 mm︱ 350 x 350 mm︱band speed 20 / 35 / 50 / 70 m/min︱dimensions of saw-band 3900 x 27 x 0,9 mm︱total power requirement 1,1 kW︱weight of the machine ca. 0,46 t︱dimensions of the machine ca. 2050x850x1300 mm︱
            cutting diameter 350 mm
            saw band length 3900 mm
            cutting width 450 mm
            350 mm
            capacity 90 degrees: flat 450 x 280 mm
            350 x 350 mm
            band speed 20 / 35 / 50 / 70 m/min
            dimensions of saw-band 3900 x 27 x 0,9 mm
            total power requirement 1,1 kW
            weight of the machine ca. 0,46 t
            dimensions of the machine ca. 2050x850x1300 mm


        • RS Sperling
        • von-Braun-Str. 20
        • 46244 Bottrop
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal HUVEMA BMSY 325 C


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-010096 · Bandsaw - Horizontal

          HUVEMA - BMSY 325 C - - 2021 -

          Technical details
          cutting diameter 325 mm︱saw band length 4380x34x1,1 mm︱cutting width 450 mm︱cutting capacity - flat 450 x 325 / 90° mm︱cutting capacity - round 325 /90° mm︱speed 20 - 100 m/min︱sawing motor 2,2 kW︱total power requirement 3 kW︱weight of the machine ca. 1010 kg︱dimensions of the machine ca. 2100 x 860 x 1500 mm︱
          Accessories: • Inverter • hydraulical vice • automatical movement to the top via hydraulical cylinder.
            cutting diameter 325 mm
            saw band length 4380x34x1,1 mm
            cutting width 450 mm
            cutting capacity - flat 450 x 325 / 90° mm
            cutting capacity - round 325 /90° mm
            speed 20 - 100 m/min
            sawing motor 2,2 kW
            total power requirement 3 kW
            weight of the machine ca. 1010 kg
            dimensions of the machine ca. 2100 x 860 x 1500 mm
            Description :
            Accessories:
            • Inverter
            • hydraulical vice
            • automatical movement to the top via hydraulical cylinder.


        • Feyen Maschinen GmbH
        • Gelleperstr. 10
        • 47809 Krefeld
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal V-TRADE BMT 330 AV


          • Volz Werkzeugmaschinen
          • Friedrich-Ebert Straße 78-80
          • 58454 Witten-Annen
          • Deutschland

          • +49 (0) 23 02 / 98 72 – 0
            +49 (0) 23 02 / 98 72 - 50
          • anfrage@volz-witten.de
            www.volz-witten.de
          #1134-6064 · Bandsaw - Horizontal

          V-TRADE - BMT 330 AV - - 2021 -

          Technical details
          cutting diameter 330 mm︱saw band length 4100 mm︱cutting width 480 mm︱round 330 mm︱
            cutting diameter 330 mm
            saw band length 4100 mm
            cutting width 480 mm
            round 330 mm


        • Volz Werkzeugmaschinen
        • Friedrich-Ebert Straße 78-80
        • 58454 Witten-Annen
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal HUVEMA HU 320 BMSY-G


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-010042 · Bandsaw - Horizontal

          HUVEMA - HU 320 BMSY-G - - 2020 -

          Technical details
          cutting diameter 320 mm︱saw band length 3660 mm︱cutting width 350 mm︱cutting speed 20-85 m/min︱capacity 90 degrees: round 320 mm︱capacity 90 degrees: square 350 x 320 mm︱total power requirement 2 kW︱weight of the machine ca. 0,9 t︱dimensions of the machine ca. 1,8 x 0,9 x 1,3 m︱
          • Saw bow rotatable to 45°
            cutting diameter 320 mm
            saw band length 3660 mm
            cutting width 350 mm
            cutting speed 20-85 m/min
            capacity 90 degrees: round 320 mm
            capacity 90 degrees: square 350 x 320 mm
            total power requirement 2 kW
            weight of the machine ca. 0,9 t
            dimensions of the machine ca. 1,8 x 0,9 x 1,3 m
            Description :
            • Saw bow rotatable to 45°


        • Feyen Maschinen GmbH
        • Gelleperstr. 10
        • 47809 Krefeld
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal HUVEMA HU 300 ACV-4 Topline


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-010106 · Bandsaw - Horizontal

          HUVEMA - HU 300 ACV-4 Topline - - 2020 -

          Technical details
          cutting diameter 240 mm︱saw band length 2965 x 27 x 0,93 mm︱cutting width 240 mm︱cutting speed 37 - 74 m/min︱capacity 90 degrees: round 240 mm︱capacity 90 degrees: square 285 x 210 mm︱capacity 60 degrees: round 140 mm︱capacity 60 degrees: flat 140 x 130 mm︱capacity 45 degrees: round 170 mm︱voltage 400 V / 50 Hz︱total power requirement 1,3 kW︱weight of the machine ca. 0,3 t︱dimensions of the machine ca. 1,8 x 0,9 x 1,3 m︱
          • Saw bow rotatable +/- 45°
            cutting diameter 240 mm
            saw band length 2965 x 27 x 0,93 mm
            cutting width 240 mm
            cutting speed 37 - 74 m/min
            capacity 90 degrees: round 240 mm
            capacity 90 degrees: square 285 x 210 mm
            capacity 60 degrees: round 140 mm
            capacity 60 degrees: flat 140 x 130 mm
            capacity 45 degrees: round 170 mm
            voltage 400 V / 50 Hz
            total power requirement 1,3 kW
            weight of the machine ca. 0,3 t
            dimensions of the machine ca. 1,8 x 0,9 x 1,3 m
            Description :
            • Saw bow rotatable +/- 45°


        • Feyen Maschinen GmbH
        • Gelleperstr. 10
        • 47809 Krefeld
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal HUVEMA BMSY 360 CGH


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-010098 · Bandsaw - Horizontal

          HUVEMA - BMSY 360 CGH - - 2020 -

          Technical details
          cutting diameter 360 mm︱saw band length 5200 x 34 x 1,1 mm︱cutting width 700 mm︱cutting capacity - flat 590 x 360 /30° mm︱cutting capacity - round 360 / 30° mm︱cutting capacity - square 360 x 360 / 30° mm︱cutting capacity - flat 460 x 360 /45° mm︱cutting capacity - round 360 /45° mm︱cutting capacity - square 360 x 360 / 45° mm︱cutting capacity - flat 305 x 360 /60° mm︱cutting capacity - round 360 / 60° mm︱cutting capacity - square 305 x 360 / 60° mm︱cutting capacity - flat 700 x 360 / 90° mm︱cutting capacity - round 360 / 90° mm︱cutting capacity - square 360 x 360 / 90° mm︱speed 20 - 100 m/min︱sawing motor 3 kW︱hydraulic motor 0,55 kW︱coolant pump 0,12 kW︱voltage 400 V / 50 Hz︱
          Accessories: • Inverter • hydraulical vice • automatical movement to the top via hydraulical cylinder.
            cutting diameter 360 mm
            saw band length 5200 x 34 x 1,1 mm
            cutting width 700 mm
            cutting capacity - flat 590 x 360 /30° mm
            cutting capacity - round 360 / 30° mm
            cutting capacity - square 360 x 360 / 30° mm
            cutting capacity - flat 460 x 360 /45° mm
            cutting capacity - round 360 /45° mm
            cutting capacity - square 360 x 360 / 45° mm
            cutting capacity - flat 305 x 360 /60° mm
            cutting capacity - round 360 / 60° mm
            cutting capacity - square 305 x 360 / 60° mm
            cutting capacity - flat 700 x 360 / 90° mm
            cutting capacity - round 360 / 90° mm
            cutting capacity - square 360 x 360 / 90° mm
            speed 20 - 100 m/min
            sawing motor 3 kW
            hydraulic motor 0,55 kW
            coolant pump 0,12 kW
            voltage 400 V / 50 Hz
            Description :
            Accessories:
            • Inverter
            • hydraulical vice
            • automatical movement to the top via hydraulical cylinder.


        • Feyen Maschinen GmbH
        • Gelleperstr. 10
        • 47809 Krefeld
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal HUVEMA HU 270 AC-4


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-010095 · Bandsaw - Horizontal

          HUVEMA - HU 270 AC-4 - - 2020 -

          Technical details
          cutting diameter 220 mm︱saw band length 2465 mm︱cutting width 0,9 mm︱capacity 90 degrees: flat 230 x 185 mm︱capacity 45 degrees: round 150 mm︱capacity 45 degrees: flat 210 x 150 mm︱cutting speed 35-70 m/min︱cutting angle 45 °︱total power requirement 1,1 kW︱weight of the machine ca. 0,2 t︱dimensions of the machine ca. 1,4 x 0,75 x 1 m︱
          • compl. saw bow swivellable for miter cuttings • autom. limit stop • adjustment of the saw pressure by hydr. cylinder • coolant device
            cutting diameter 220 mm
            saw band length 2465 mm
            cutting width 0,9 mm
            capacity 90 degrees: flat 230 x 185 mm
            capacity 45 degrees: round 150 mm
            capacity 45 degrees: flat 210 x 150 mm
            cutting speed 35-70 m/min
            cutting angle 45 °
            total power requirement 1,1 kW
            weight of the machine ca. 0,2 t
            dimensions of the machine ca. 1,4 x 0,75 x 1 m
            Description :
            • compl. saw bow swivellable for miter cuttings
            • autom. limit stop
            • adjustment of the saw pressure by hydr. cylinder
            • coolant device


        • Feyen Maschinen GmbH
        • Gelleperstr. 10
        • 47809 Krefeld
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal ZIMMER Z 100/R


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04552 · Bandsaw - Horizontal

          ZIMMER - Z 100/R - - 2019 -

          Technical details
          cutting diameter 105 mm︱saw band length 1140 x 13 x 0,65 mm︱cutting width 100/100x105 mm︱capacity 60 degrees: round mm︱capacity 45 degrees: flat 55 x 55 mm︱capacity 45 degrees: round 60 mm︱total power requirement 0,18 kW︱weight of the machine ca. 18 kg︱dimensions of the machine ca. ca.400 x 300 x 350 mm︱
          We must ask you to request machines from us on a daily basis in the near future. Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. Gear drive, automatic belt tension, electronically adjustable Belt speed from 20 to 100 m / min Due to the light aluminum housing, the machine is very light and therefore good mobile use.
            cutting diameter 105 mm
            saw band length 1140 x 13 x 0,65 mm
            cutting width 100/100x105 mm
            capacity 45 degrees: flat 55 x 55 mm
            capacity 45 degrees: round 60 mm
            total power requirement 0,18 kW
            weight of the machine ca. 18 kg
            dimensions of the machine ca. ca.400 x 300 x 350 mm
            Description :
            We must ask you to request machines from us on a daily basis in the near future.
            Please notice:
            We would be happy to make you a free offer. However, please understand that we
            only process inquiries with complete address details.



            Gear drive, automatic belt tension, electronically adjustable
            Belt speed from 20 to 100 m / min
            Due to the light aluminum housing, the machine is very light and therefore good
            mobile use.


        • Schmeisser Werkzeugmaschinen
        • Lochfelbenstrasse 2
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal W.Z 150/R


          • Maschinen Schwartpaul GmbH
          • Am Wasserwerk 1
          • 58840 Plettenberg
          • Deutschland

          • +49 (0)2391-95960
            +49 (0)2391-959620
          • info@maschinen-schwartpaul.de
            www.maschinen-schwartpaul.de
          #2020-20005 · Bandsaw - Horizontal

          W.Z - 150/R - - 2016 -

          Technical details
          cutting capacity - round Ø 150 mm︱ Ø 75 mm︱ 150x125 mm︱ 70x50 mm︱ 125 mm︱ 50 mm︱speeds steplessly adjustable 25-138 m/min︱total power requirement 1,8 kW︱weight of the machine ca. 35 kg︱
            cutting capacity - round Ø 150 mm
            Ø 75 mm
            150x125 mm
            70x50 mm
            125 mm
            50 mm
            speeds steplessly adjustable 25-138 m/min
            total power requirement 1,8 kW
            weight of the machine ca. 35 kg


        • Maschinen Schwartpaul GmbH
        • Am Wasserwerk 1
        • 58840 Plettenberg
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal MEBA Eco 335 DG


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-ZA411 · Bandsaw - Horizontal

          MEBA - Eco 335 DG - - 2012 -

          Technical details
          cutting diameter - mm︱saw band length - mm︱cutting width - mm︱capacity 335 mm︱dimensions of the machine ca. 1.500 x 2.100 x 1.800 m︱
          Brand Meba Type Eco 335 DG Year of make 2012 Horizontal Semi-automatic Capacity around 335 mm Capacity rectangular 335 x 400 mm Absent +60 / -45 ° Variably adjustable speed Hydraulic clamping Hydraulic lowering Machine size (lxwxh) 1.500 x 2.100 x 1.800 mm
            cutting diameter - mm
            saw band length - mm
            cutting width - mm
            capacity 335 mm
            dimensions of the machine ca. 1.500 x 2.100 x 1.800 m
            Description :
            Brand Meba
            Type Eco 335 DG
            Year of make 2012
            Horizontal
            Semi-automatic
            Capacity around 335 mm
            Capacity rectangular 335 x 400 mm
            Absent +60 / -45 °
            Variably adjustable speed
            Hydraulic clamping
            Hydraulic lowering
            Machine size (lxwxh) 1.500 x 2.100 x 1.800 mm


        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal HUVEMA HU 230 DG


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-003356 · Bandsaw - Horizontal

          HUVEMA - HU 230 DG - - 2010 -

          Technical details
          cutting diameter 230 mm︱saw band length 2730 x 27 mm︱cutting width 0,9 mm︱capacity 90 degrees: flat 320 x 130 mm︱capacity 45 degrees: round 180 mm︱capacity 45 degrees: flat 230 x 100 mm︱cutting speed 35 - 70 m/min︱cutting angle + - 45 °︱hydraulic motor 0,37 kW︱coolant pump 0,12 kW︱sawing motor 1,5 kW︱total power requirement 2 kW︱weight of the machine ca. 440 kg︱dimensions of the machine ca. 1,4 x 0,9 x 1,3 m︱
          Setting of the saw pressure by hydr. cylinder Cooling device,
            cutting diameter 230 mm
            saw band length 2730 x 27 mm
            cutting width 0,9 mm
            capacity 90 degrees: flat 320 x 130 mm
            capacity 45 degrees: round 180 mm
            capacity 45 degrees: flat 230 x 100 mm
            cutting speed 35 - 70 m/min
            cutting angle + - 45 °
            hydraulic motor 0,37 kW
            coolant pump 0,12 kW
            sawing motor 1,5 kW
            total power requirement 2 kW
            weight of the machine ca. 440 kg
            dimensions of the machine ca. 1,4 x 0,9 x 1,3 m
            Description :
            Setting of the saw pressure by hydr. cylinder
            Cooling device,



        • Feyen Maschinen GmbH
        • Gelleperstr. 10
        • 47809 Krefeld
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal JAESPA Concept 800-1000 HAP


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-003403 · Bandsaw - Horizontal

          JAESPA - Concept 800-1000 HAP - - 2008 -

          Technical details
          cutting diameter 800 mm︱saw band length 8500 x 54 x 1,6 mm︱cutting width 1000 mm︱cutting capacity - flat 800 x 1000 mm︱cutting capacity - round 800 mm︱cutting capacity - square 800 x 800 mm︱speed 15 - 100betrieb m/min︱operating pressure 50 bar︱operating pressure Spannbacken -40 bar︱operating pressure Bündelspanner - 6-15 bar︱sawing motor 11 kW︱hydraulic motor 1,5 kW︱voltage 400 V / 50 Hz︱total power requirement 13,4 kW︱weight of the machine ca. 3800 kg︱dimensions of the machine ca. 4100 x 1300 x 2450 mm︱
          Accessories: Inverter Hydromechanical blade tensioner Chip remover Hydraulic vice without roller conveyor, Saw band
            cutting diameter 800 mm
            saw band length 8500 x 54 x 1,6 mm
            cutting width 1000 mm
            cutting capacity - flat 800 x 1000 mm
            cutting capacity - round 800 mm
            cutting capacity - square 800 x 800 mm
            speed 15 - 100betrieb m/min
            operating pressure 50 bar
            operating pressure Spannbacken -40 bar
            operating pressure Bündelspanner - 6-15 bar
            sawing motor 11 kW
            hydraulic motor 1,5 kW
            voltage 400 V / 50 Hz
            total power requirement 13,4 kW
            weight of the machine ca. 3800 kg
            dimensions of the machine ca. 4100 x 1300 x 2450 mm
            Description :
            Accessories:
            Inverter
            Hydromechanical blade tensioner
            Chip remover
            Hydraulic vice
            without roller conveyor,
            Saw band


        • Feyen Maschinen GmbH
        • Gelleperstr. 10
        • 47809 Krefeld
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal BOMAR economic 510.320 DG


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3797 · Bandsaw - Horizontal

          BOMAR - economic 510.320 DG - - 2008 -

          Technical details
          cutting diameter 345 mm︱dimensions of saw-band 4780 x 32(34) x 1,1 mm︱cutting width s. Abbildung mm︱coolant pump Typ 2C0P1-14H ︱coolant capacity 50 dm³︱output 2,6 ︱angle adjustable from - to -45 bis +60 Grad︱weight of the machine ca. 630 kg︱dimensions ca. 2400 x 845 x 1430 mm︱
            cutting diameter 345 mm
            dimensions of saw-band 4780 x 32(34) x 1,1 mm
            cutting width s. Abbildung mm
            coolant pump Typ 2C0P1-14H
            coolant capacity 50 dm³
            output 2,6
            angle adjustable from - to -45 bis +60 Grad
            weight of the machine ca. 630 kg
            dimensions ca. 2400 x 845 x 1430 mm


        • WeMa Antonius Pigge GmbH
        • Barnstorfer Str. 3
        • 49424 Goldenstedt
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal Klaeger HBS320


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03790 · Bandsaw - Horizontal

          Klaeger - HBS320 - - 2004 -

          Technical details
          cutting diameter 320 mm︱saw band length 4150x1,1 mm︱cutting width 600 mm︱total power requirement kW︱weight of the machine ca. 0,44 t︱dimensions of the machine ca. m︱
          Fully automatic band saw roller conveyor Dimensions: 4000x700
            cutting diameter 320 mm
            saw band length 4150x1,1 mm
            cutting width 600 mm
            weight of the machine ca. 0,44 t
            Description :
            Fully automatic band saw roller conveyor Dimensions: 4000x700


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal BOMAR STG 225.160 G


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-052125 · Bandsaw - Horizontal

          BOMAR - STG 225.160 G - - 2003 -

          Technical details
          cutting diameter 165 mm︱saw band length 2400 x 0,90 x 20 mm︱cutting width 225 mm︱band speed 35 7 70 m/min︱Capacity 90° rectangular 225 x 160 mm︱ 225 x 160 mm︱ 165 x 165 mm︱ 165 mm︱Capacity 90° rectangular 170 x 100 mm︱ 155 x 155 mm︱ 155 x 155 mm︱capacity 60 degrees: round 65 mm︱capacity 60 degrees: flat 110 y 60 mm︱capacity 60 degrees: square 60 x 60 mm︱total power requirement kW︱weight of the machine ca. 150 kg︱dimensions of the machine ca. 1100 x 450 x 1350 mm︱base ︱Coolant System ︱pneumatic clamping
          manual band saw machine for industrial work developed.
            cutting diameter 165 mm
            saw band length 2400 x 0,90 x 20 mm
            cutting width 225 mm
            band speed 35 7 70 m/min
            Capacity 90° rectangular 225 x 160 mm
            225 x 160 mm
            165 x 165 mm
            165 mm
            Capacity 90° rectangular 170 x 100 mm
            155 x 155 mm
            155 x 155 mm
            capacity 60 degrees: round 65 mm
            capacity 60 degrees: flat 110 y 60 mm
            capacity 60 degrees: square 60 x 60 mm
            weight of the machine ca. 150 kg
            dimensions of the machine ca. 1100 x 450 x 1350 mm
            Description :
            manual band saw machine for industrial work
            developed.


        • RS Sperling
        • von-Braun-Str. 20
        • 46244 Bottrop
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal THOMAS Super Trade 350 SO


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-38732 · Bandsaw - Horizontal

          THOMAS - Super Trade 350 SO - - 2000 -

          Technical details
          capacity 90 degrees: round 270 mm︱capacity 90 degrees: square 260 mm︱ 350 x 240 ︱band speed 36/72 m/min︱saw band length 2925 x 27 x 0,9 mm︱total power requirement 1,9 kW︱weight of the machine ca. 0,6 kg︱Dimensions (LxWxH) 1,9 x 1,1 x 1,75 0︱
          Band saw including micro spray device
            capacity 90 degrees: round 270 mm
            capacity 90 degrees: square 260 mm
            350 x 240
            band speed 36/72 m/min
            saw band length 2925 x 27 x 0,9 mm
            total power requirement 1,9 kW
            weight of the machine ca. 0,6 kg
            Dimensions (LxWxH) 1,9 x 1,1 x 1,75 0
            Description :
            Band saw including micro spray device


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal MEP Shark 200


          • Valk Machines BV
          • Kadijk 6
          • 8531XD Lemmer
          • Niederlande

          • +31 514562904
          • sales@valkmachines.com
            www.valkmachines.com
          #2079-001 · Bandsaw - Horizontal

          MEP - Shark 200 - - 1998 -

          Technical details
          Sawing capacity round 160 mm︱Sawing capacity square 160 mm︱Sawing capacity rectangular 160 x 200 mm︱Sawing Angle 45/60 Grad︱cutting speed 33/66 m/min︱total power requirement 1,9 kW︱weight of the machine ca. 310 t︱required space 1,1 x 0,8 x 1,5 m︱
            Sawing capacity round 160 mm
            Sawing capacity square 160 mm
            Sawing capacity rectangular 160 x 200 mm
            Sawing Angle 45/60 Grad
            cutting speed 33/66 m/min
            total power requirement 1,9 kW
            weight of the machine ca. 310 t
            required space 1,1 x 0,8 x 1,5 m


        • Valk Machines BV
        • Kadijk 6
        • 8531XD Lemmer
        • Niederlande

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal BEWO 350


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-ZA414 · Bandsaw - Horizontal

          BEWO - 350 - - 1996 -

          Technical details
          cutting diameter - mm︱saw band length - mm︱cutting width - mm︱capacity 240 mm︱saw band length 3.010 mm︱dimensions of the machine ca. 1.900 x 1.700 x 1.500 m︱
          Brand Bewo Type 350 Year of make 1996 Horizontal Semi-automatic Capacity 240 mm Absent 45 ° Saw blade dimension 3010 mm Manual clamps Hydraulic clamping Hydraulic lowering Machine size (lxwxh) 1.900 x 1.700 x 1.500 mm
            cutting diameter - mm
            saw band length - mm
            cutting width - mm
            capacity 240 mm
            saw band length 3.010 mm
            dimensions of the machine ca. 1.900 x 1.700 x 1.500 m
            Description :
            Brand Bewo
            Type 350
            Year of make 1996
            Horizontal
            Semi-automatic
            Capacity 240 mm
            Absent 45 °
            Saw blade dimension 3010 mm
            Manual clamps
            Hydraulic clamping
            Hydraulic lowering
            Machine size (lxwxh) 1.900 x 1.700 x 1.500 mm


        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal KASTO SBL 280 U


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-052107 · Bandsaw - Horizontal

          KASTO - SBL 280 U - - 1995 -

          Technical details
          cutting diameter 280 mm︱saw band length 3830 x 25 x 0,9 mm︱cutting width 360 x 180 mm︱ 180 x 180 mm︱Capacity 45° rectangular 260 x 180 mm︱ 180 mm︱ 280 x 280 mm︱cutting speed 19 - 110 m/min︱coolant tank 35 l︱Capacity 16 l/min︱total power requirement 2,0 kW︱weight of the machine ca. 0,44 t︱dimensions of the machine ca. 2,8 x 0,85 x 2,35 m︱Saw Band
            cutting diameter 280 mm
            saw band length 3830 x 25 x 0,9 mm
            cutting width 360 x 180 mm
            180 x 180 mm
            Capacity 45° rectangular 260 x 180 mm
            180 mm
            280 x 280 mm
            cutting speed 19 - 110 m/min
            coolant tank 35 l
            Capacity 16 l/min
            total power requirement 2,0 kW
            weight of the machine ca. 0,44 t
            dimensions of the machine ca. 2,8 x 0,85 x 2,35 m


        • RS Sperling
        • von-Braun-Str. 20
        • 46244 Bottrop
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal JAESPA ohne


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-353091 · Bandsaw - Horizontal

          JAESPA - ohne - - 1990 -

          Technical details
          cutting diameter 250 mm︱saw band length 0 mm︱cutting width mm︱workpiece dia. 150 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Horizontal band saw
            cutting diameter 250 mm
            workpiece dia. 150 mm
            Description :
            Horizontal band saw


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          •   
          •   

          TOP Manufacturer:

          MEP - FRAMAG - TRENNJAEGER - EISELE -