tube length 6000 mm max.︱tube diameter max. 70 mm︱with brush deburring machine . ︱control LAUER ︱

---

---

---

---

---

---

High-quality tube sawing system with brush deburring machine and stack handling ACS 90/2/BM+BDM+SRT+Pi / Brand: RATTUNDE / Type: ACS 90/2 Year of construction: 2002, Commissioning: week 51, 2002 The machine can be inspected by appointment in the factory under power. Production of a sample part possible. The machine has been continuously maintained and serviced by the manufacturer, for example: Length measuring system renewed in 2020. TECHNICAL DATA OF THE PLANT AND PROCESSING PARAMETERS: CNC-Control: Siemens Sinumerik 840D Tube processing parameters - External diameter: 10 - 90 mm - Tube shape: Round tube, profile tube - Wall thickness: 0,8 mm - 8 mm - Length solid material: 12.000 mm - Max. unit mass of input material: 120 kg - Tube cutting length: to 2.300 mm with brush deburring machine BDM from 86 mm – 2.300 mm - Max. Mass of tube section: 20 kg (larger mass possible with acceleration reduction) - Length tube cut: approx. 10 mm - Length residual tube: 50 mm - 70 mm - Material: Steel, stainless steel, other materials possible on request from the manufacturer Performance data - Machining speed: max. 2.500 pieces/h in single cut (Depending on diameter, length and material) Machining accuracy: +/- 0,05 mm + Saw blade tolerance Approximately +/- 0,10 mm can be achieved. Pipe length adjustment: for pipe saw ACS and brush deburring machine BDM through entering the pipe length at the control panel Brush deburring machine BDM Internal and external pipe deburring: The "Rattunde disc transport" guides the tube vertically oscillating and rotating past the roller brushes. Profiles are rotated once through 360° duringtransport. Bundle loading magazine BM with separation and pre-positioning Connected loads, electrical: - Installed capacity: approx. 50 kW - Backup fuse: 100 A - Total weight of the system approx.: 15,0 tons (ACS 90 + BDM = 11,0 tons BM = 2,5 tons SRT = 1,5 tons) Overall dimensions: - Length x Width x Height approx.: 19.000 x 6.430 x 2.350 mm - CE marking - Documentation Detailed technical data sheet and information on equipment available on request. There is no guarantee for correctness and completeness of the technical details and accessoires.

---

Specified short-length line: double cutting-off machine constr. Reika year: late 90's with measuring system constr. AKEA Working range: tube outer diameter: 20-90 mm wall thickness: 1-12 mm inlet lengths: 3 - 13 m cutting lengths: 150 - 1500 mm cutting head speed: 150 - 1700 rpm feed rate 0-1 mm / rpm Scope of delivery: - inlet rack with tube separation - entry conveyor belt (DOUBLE) - tube cutting-off machine(DOUBLE) - double-sided end processing system (chamfering, levelling) - AKEA measurement system: whirling arm test, inner mandrel-check, ring outside check, internal brush cleaning and blowing out device The plant is complete with all auxiliaries units.

---

As good as new! A single feed handle and an on / off switch allow easy operation. Thanks to its compact two-piece design, the HC-300 can be used in confined spaces and hard to reach areas.

---

RSA High capacity/speed rectangualr sawing, deburring and cleaning center for steel, stainless steel and non-ferrous tubes Construction: RSA Type: RASACUT NC 2000 New: 1998 Condition: Good Operating hours: The line was running less than 10.000 working hours only. Working range: ============ Round tubes: 10 - 54 mm Fixed length sawing / beburring: 100 - 2.000 mm Stock lengths: up to 16.000 mm Length tolerance: +/- 0,2 mm Cutting speed: 30 to 250 m/min Saw Blade Diameter: 315 mm Saw Motor: 8 kW Electrical control: SIEMENS SIMATIC S5 100 U, CPU-103 with LENZE control unit The line consists of: ================ - Material loading magazin for tubes lengths up to 16.200 mm (the unit can be shortened for shorter material) - RSA High cacacity/speed sawing center RASACUT NC 2000 - RSA Brush deburring system RASAPLAN XY 2000, motor: 19 kW - Exhausting unit / wet separator for RSA deburring system RASAPLAN XY 2000 - RSA cleaning system RASACLEAN ET 2000 - RSA drying system, capacity: 30 kW - Divers accessories and spares. Video: is exposed on our website. Detailed machine description: available upon request. Total weight: approx. 9.500 kgs

workpiece diameter 150 mm︱

---