Circular Sawing Machine - Automatic
Machinelist: Circular Sawing Machine - Automatic
Circular Sawing Machine - Automatic
- Brandner Revalue GmbH
- Mozartstr. 24
- 89264 Weißenhorn
- Deutschland
-
+49 (0) 7309 928 58 75
+49 (0) 7309 928 58 74 -
mb@b-rv.de
www.b-rv.de
- Matthias Ehlers Werkzeugmaschinen
- Nikolaus-Otto-Straße 19 + 21
- 22946 Trittau
- Deutschland
-
+49 (0)4154 - 986 99 12
+49 (0)4154 - 986 99 14 -
anfrage@ehlers-wzm.de
www.ehlers-wzm.de
#2033-2023181 · Circular Sawing Machine - Automatic
BEHRINGER EISELE - PSU 450-H - - 2018 -
Technical details
In our opinion, the machine is in good condition Condition and can be viewed under power by appointment. technical features: - Operating hours: 618 h Accesories: - Roller conveyor left: 4 meters - Roller conveyor right: 3 meters ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***
- Stiens Werkzeugmaschinen GmbH
- Mittelweg 92
- 59302 Oelde
- Deutschland
-
+49 252283490
(0049) - 2522 - 8349-20 -
info@stiens.de
www.stiens.de
#1039-5984 · Circular Sawing Machine - Automatic
BERG & SCHMID - Velox 350 HA MPS - - unbekannt -
Technical details
Circular Sawing Machine - Automatic BERG & SCHMID - Velox 350 HA MPS
- SKM Industriemaschinen
- Röntgenstr. 3
- 89264 Weißenhorn
- Deutschland
-
+49 (0) 7309 954 986 0
+49 (0) 7309 954 986 1 -
info@skm-maschinen.de
www.skm-maschinen.de
#2032-1712 · Circular Sawing Machine - Automatic
BERG & SCHMID - VKS 370 VA - - 2016 -
Technical details
incl. roller conveyor 4,000 mm x 400 mm including special clamping jaws for thin-walled material incl. micro spray unit incl. coolant pump with hand sprayer including 4 saw blades incl. chip drawer miter left 60° + or 45° Hydropneumatic control of the saw unit Electro-pneumatic material feed unit Smooth-running, powerful worm drive with large Transmission ratio, integrated in a stable cast housing for spare parts optimal cutting results Vice with double clamping arm for low-burr cuts. (b.) additionally with Lateral quick shift when changing the miter Precision prism guide of the gear head, laterally adjustable Particularly stable base with built-in automatic cooling and large chip drawer Chip removal brush in the saw blade protective hood MPS control: Save cut start/end Display of power consumption, number of pieces, cutting time... Water cooling adjustable cutting pressure regulator Electropneumatic material feed unit Automatic ball roller guided feeding unit with nonius as standard length adjustment. Adjustable for section lengths from 2.5 mm to 530 mm or by automatic reversing 1 - 29 times repeatable. Remaining length 230 mm Number of saw cuts programmable up to 9999 Infeed vice (opening width 200 mm) floating, to also with deformed cutting materials to obtain precise cuts
- HANS - JÜRGEN GEIGER
- James-Watt-Str. 12
- 72555 Metzingen
- Deutschland
-
(0049)-7123-18040
(0049)-7123-18384 -
geiger@geiger-germany.com
www.geiger-germany.com
#1049-516896 · Circular Sawing Machine - Automatic
BERG & SCHMID - VKS 370 Va-CNC - - 2006 -
Technical details
- Christoph Busch GmbH
- Dieselstr. 22
- 41352 Korschenbroich
- Deutschland
-
+49 (0) 2182 570 5930
+49 (0) 2182 5785202 -
mail@busch-gruppe.de
www.busch-gruppe.de
#2052-05361 · Circular Sawing Machine - Automatic
FORTE - FKA 45 - - 1978 -
Technical details
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
- Kleinlein Johann GmbH&Co.KG
- Elisenstraße 4
- 90441 Nürnberg
- Deutschland
-
+49 911628110
+49 9116281155 -
info@kleinlein.de
www.kleinlein.de
- HANS - JÜRGEN GEIGER
- James-Watt-Str. 12
- 72555 Metzingen
- Deutschland
-
(0049)-7123-18040
(0049)-7123-18384 -
geiger@geiger-germany.com
www.geiger-germany.com
#1049-227663 · Circular Sawing Machine - Automatic
KALTENBACH - KKS 400 NA/LM - - 1986 -
Technical details
K A L T E N B A C H (Germany) Automatic Circular Cold Saw with Mitre Cut Model KKS 400 NA (1200) Year 1986 __________________________________________________________________ Saw blade Ø max. 400 mm Working range: Tubes, Ø approx. 130 mm Flat section 315 x 40 mm Solid material 240 x 85 mm Table adjustment + / - 90 ° Sawing slide feed, approx. 0 - 12,000 m/min Quick return of saw blade 1,800 mm/min Saw blade drive, approx. 2.6 kW Total electrical load, approx. 4.5 kW - 380 V - 50 Hz Weight, approx. 1,000 kg Accessories / Special Features: * Mitre cut, left and right, +/- 90°. * Semi-automatic sawing process, including workpiece clamping, sawing feed, saw blade return, and opening of clamp. * (Special mechanical length stop for three pipes, dia. approx. 15 mm). * Roller track for finished parts, with sorting device for remaining parts. * Hydraulic vertical clamp, which can be preset. * Infinitely variable hydraulic saw blade feed from lower to upper position. * Separate hydraulic aggregate. * Separate coolant device. * Various spare parts and accessories. * Safety shields. The machine was used for cutting pipes, which were fed into the machine with an inclined magazine, and automatically sawn with a mitre cut.
- Amann Werkzeugmaschinen GmbH
- Landshuter Straße 1
- 85716 Unterschleißheim
- Deutschland
-
(0049) 89 317754 0
(0049) 89 3174262 -
info@amann-wzm.de
www.amann-wzm.de
#1006-16249 · Circular Sawing Machine - Automatic
KALTENBACH - KKS 401 - - 1991 -
Technical details
Absorption according to DIN 8576 Hole: 50 mm Number of driving pins: 4 pieces Pitch circle of the driving pin 80 mm Diameter of the retaining bolt: 13mm With automatic replenishment NA 600
- GWM GmbH
- Gewerbestr. 2
- 79639 Grenzach-Wyhlen
- Deutschland
-
(0049) 7624 9082 0
07624 9082-206 -
info@gromag.ch
www.gromag.ch
#1044-2560 · Circular Sawing Machine - Automatic
KALTENBACH - KKS 401 - - 1990 -
Technical details
with feed rolls and fence
Trader Profile: Amann Werkzeugmaschinen GmbH
Contact Trader
Landshuter Straße 1
85716 - Unterschleißheim
Deutschland
(0049) 89 317754 0">(0049) 89 317754 0
(0049) 89 3174262
info@amann-wzm.de
www.amann-wzm.de
Profile of Trader
Amann was founded in 1969 and - in the course of the years -has developed from a small-sized enterprise into one of the best-known and trusted machine tool-dealers in Germany.
In 1988, we built our present-day production halls and offices in the north of Munich. Today, on an exhibition area of more than 5,000 m2, more than 500 premium second-hand and new machinetools are available for our valued customers at all times. An expansion in size and range that has made it possible for us to not just serve the traditional European field, but also the ambitious and still upcoming Asian market. Our maxims of high quality standards, German reliability, topquality services and fair prices are highly valued by our local, regional and international customers for more than 40 years now.
Extensive contacts to the large-scale industry enable us to find almost any machine tool for you. Our special service: The Amann Search Service - with it, even highly specialized search inquiries are in good hands with us. All of this makes us an efficient partner, operating on an internationalclevel and catering to all your needs and wishes in metal working.
Discover the advantages of working with Amann!
Especially for the automotive industry (OEM and suppliers), aerospace, medical technology, transmission manufacturing, ball/rolling bearing production, mechanical engineering and measurement/control technology, Amann is one of the prime addresses for highest economic efficiency. Our comprehensive line of products ranges from conventional to CNC-controlled machine tools. We have in stock every machine (used and new) essential to your production - from lathes, milling machines, grinding machines, gear cutting machines, presses, machining centres, drilling machines and complete crankshaft production lines to sheet metal processing machines like plate shears, press brakes, roll bending machines,laser machines, punch presses, polishing machines - and many more.
In addition we are experts in distributing complex manufacturing lines and entire operational facilities. Our second-hand machine tools bear the names of renowned manufacturers like: Aba, Amada, Boeringer, DMG, Doerries, Durma, EHT, Elb, Gleason, Hurth, Ingersoll, Jung, Klingenberg, Liebherr, Lorenz, LVD, Matec, Mazak, Mori Seiki, Müller-Weingarten, Nosstek, Oerlikon, Pfauter, Reisshauer, Schaudt, Schiess, Schuler, Studer, Soraluce, Timesaver, TOS, Trumpf, Schuler, Union, Weiler, Weinbrenner, WFL and Wotan..
Office & warehouse Landshuter Str. 1 - 85716 Unterschleissheim/Muenchen Germany | |
Phone +49 89 317754-0 | |
Fax +49 89 317754-99 | |
Email All inquiries and offers to : info@amann-wzm.de | |
Mr. Bobe General Manager | |
Mrs. Amann Authorized signatory | |
Mr. Haertl Sales Manager Europe / Africa | |
Mr. Berchner Sales Manager Middle East / Asia | |
Mr. Nagel Sales Manager Middle East / Asia | |
Mrs. Krappel Sales Assistent | |
Mrs. Juelicher Sales Assistent |
Landshuter Straße 1
Contact Trader
Landshuter Straße 1
85716 - Unterschleißheim
Deutschland
(0049) 89 317754 0
(0049) 89 3174262
info@amann-wzm.de
www.amann-wzm.de
Contact person:
Herrn Alois Kindermann 08931775420
Auf 5000 m² Ausstellungsfläche stehen ständig mehr als 500 moderne gebrauchte Werkzeugmaschinen für unsere Kunden zu Verfügung.