European network of stockholding machinery dealers

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:

          Rack Grinding Machine

          Machinelist: Rack Grinding Machine


          Gear Shaping Machine

          used Gear cutting machines Gear Shaping Machine LORENZ SN 4


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-23230 · Gear Shaping Machine

          LORENZ - SN 4 - - ca 1981 -

          Technical details
          max. wheel diameter 180 mm︱gear width 45 mm︱max. module 4 ︱min. module 0,5 ︱stroke length max. 0 - 52 mm︱spindle taper innen MK 4 ︱table diameter 160 mm︱table bore diameter 75 mm︱no. of strokes 355 - 630 Hub/min︱feed range 0,008 - 0,4 mm/Hub︱dimensions of the machine ca. 2,30 x 1,50 x 2,36 m︱power capacity 6 kW︱weight of the machine ca. 2.500 kg︱
            max. wheel diameter 180 mm
            gear width 45 mm
            max. module 4
            min. module 0,5
            stroke length max. 0 - 52 mm
            spindle taper innen MK 4
            table diameter 160 mm
            table bore diameter 75 mm
            no. of strokes 355 - 630 Hub/min
            feed range 0,008 - 0,4 mm/Hub
            dimensions of the machine ca. 2,30 x 1,50 x 2,36 m
            power capacity 6 kW
            weight of the machine ca. 2.500 kg
            Description :



        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Shaping Machine LORENZ SN 4


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-24154 · Gear Shaping Machine

          LORENZ - SN 4 - - ca 1981 -

          Technical details
          max. wheel diameter 180 mm︱gear width 45 mm︱max. module 4 ︱min. module 0,5 ︱stroke length max. 0 - 52 mm︱spindle taper innen MK 4 ︱table diameter 160 mm︱table bore diameter 75 mm︱no. of strokes 355 - 630 Hub/min︱feed range 0,008 - 0,4 mm/Hub︱dimensions of the machine ca. 2,30 x 1,50 x 2,36 m︱power capacity 6 kW︱weight of the machine ca. 2.500 kg︱
            max. wheel diameter 180 mm
            gear width 45 mm
            max. module 4
            min. module 0,5
            stroke length max. 0 - 52 mm
            spindle taper innen MK 4
            table diameter 160 mm
            table bore diameter 75 mm
            no. of strokes 355 - 630 Hub/min
            feed range 0,008 - 0,4 mm/Hub
            dimensions of the machine ca. 2,30 x 1,50 x 2,36 m
            power capacity 6 kW
            weight of the machine ca. 2.500 kg
            Description :



        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Shaping Machine GLEASON- PFAUTER P 1200 S


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-E23259 · Gear Shaping Machine

          GLEASON- PFAUTER - P 1200 S - - 2008 - Siemens 840D Powerline

          Technical details
          max. wheel diameter 1200 mm︱gear width 350 mm︱max. module 16 ︱min. module 0,5 ︱max. workpiece diameter 1400 mm︱table diameter 1200 mm︱table hole 300 mm︱control Siemens 840D Powerline︱total power requirement 75 kW︱weight of the machine ca. 24 t︱dimensions of the machine ca. 5x3x3,8 m︱
          Gleason-PFAUTER CNC gear shaping machine P 1200 S for the production of internally and externally cylindrical gears with internal and external teeth and other rolling profiles and moulds profiles and moulds that regularly occur on the cylindrical workpiece circumference and for the production of profiles in the single part process. Special version with hydraulic shaping head H1 SCOPE OF EQUIPMENT: - Basic machine P1200S, Siemens 840D Powerline (XP) - Hydraulic shaping head H1 - Signal light (3-colour) - Extended software for fault diagnosis - Telephone diagnosis system - Chip disposal through table bore - Set of adjusting wedges - Monitoring devices - Warm-up programme - Network connection (Ethernet) - 19" flat control panel OP 015A - Offline version "dialogue programming - Vapour separator make "3nine" type KLARA - Machine installation under floor - Rinsing gun - Mounting device - Cutting wheel holder ( 3 pieces ) - Cutting wheel holder for sheep cutting wheels - Cutting wheel holder for sheep cutting wheels - Special cutting wheel holder - Preparation for retrofitting paper belt filter system - Measuring device for machine P 1200 S - Clamping base body - BDE/MDE interface in the machine control cabinet Modification of vapour separator make "3nine" type Klara type EMMA Working range and technical data: Nominal workpiece diameter External toothing. . . . . . . . 1.200 mm Internal gearing. . . . . . . . 1.200 mm Largest workpiece circulation Ø without counter stand... 1.400 mm Nominal machine module approx. - with hydraulic impact head H1... 16 mm Shaping spindle stroke rate range - with hydraulic shaping head H1 max. 80 min-1 Largest toothing width - with hydraulic shaping head H1... 350 mm Smallest pitch height of the hydrostatic screw guide - with hydraulic shaping head H1... 850 mm Smallest/largest distance between tool and workpiece axis - with hydraulic shaping head H1... 0 - 750 mm Axial slide adjustment range - with hydraulic shaping head H1... 1.100 mm Lowest shaping spindle position above table with hydraulic shaping head H1 ** with upper position Shaping stroke... 560 mm Column side offset range - with hydraulic pusher head H1... +/- 50 mm Mould mounting cone - with hydraulic shaping head H1 - HSK-80(hollow shank taper according to DIN 69063) Workpiece with external gearing: - Module max. 16 mm, - max. toothing width 350 mm, - max. external Ø 1.200 mm, Workpiece with internal gearing: - Module max. 16 mm, - max. toothing width 350 mm, - max. circulation Ø 1.400 mm, - max. internal Ø 1.200 mm, - max. shaping wheel Ø 260 mm, - Mounting in shaping spindle HSK-80, - Slide travel; X/Y/Z- 750 /100 / 1.100 mm, Workpiece table: - Outer Ø 1.200 mm, - bore 300 mm, - max. load 150 kN, - Cooling unit, Küma, type OWT600-3KK, year 2008, - Hydraulic unit, manufactured by Parka, - Centrifuge, made by Steimel, - Air filter, Indusa, type EL4001NTDASECL/O, version AOO, max. air capacity 4.000 m³/h
            max. wheel diameter 1200 mm
            gear width 350 mm
            max. module 16
            min. module 0,5
            max. workpiece diameter 1400 mm
            table diameter 1200 mm
            table hole 300 mm
            control Siemens 840D Powerline
            total power requirement 75 kW
            weight of the machine ca. 24 t
            dimensions of the machine ca. 5x3x3,8 m
            Description :
            Gleason-PFAUTER CNC gear shaping machine P 1200 S for the production of
            internally and externally cylindrical gears with internal and external teeth
            and other rolling profiles and moulds profiles and moulds that regularly occur
            on the cylindrical workpiece circumference and for the production of profiles
            in the single part process.

            Special version with hydraulic shaping head H1

            SCOPE OF EQUIPMENT:

            - Basic machine P1200S, Siemens 840D Powerline (XP)
            - Hydraulic shaping head H1
            - Signal light (3-colour)
            - Extended software for fault diagnosis
            - Telephone diagnosis system
            - Chip disposal through table bore
            - Set of adjusting wedges
            - Monitoring devices
            - Warm-up programme
            - Network connection (Ethernet)
            - 19" flat control panel OP 015A
            - Offline version "dialogue programming
            - Vapour separator make "3nine" type KLARA
            - Machine installation under floor
            - Rinsing gun
            - Mounting device
            - Cutting wheel holder ( 3 pieces )
            - Cutting wheel holder for sheep cutting wheels
            - Cutting wheel holder for sheep cutting wheels
            - Special cutting wheel holder
            - Preparation for retrofitting paper belt filter system
            - Measuring device for machine P 1200 S
            - Clamping base body
            - BDE/MDE interface in the machine control cabinet
            Modification of vapour separator make "3nine" type Klara type EMMA

            Working range and technical data:

            Nominal workpiece diameter
            External toothing. . . . . . . . 1.200 mm
            Internal gearing. . . . . . . . 1.200 mm

            Largest workpiece circulation Ø without counter stand... 1.400 mm

            Nominal machine module approx.
            - with hydraulic impact head H1... 16 mm

            Shaping spindle stroke rate range
            - with hydraulic shaping head H1 max. 80 min-1

            Largest toothing width
            - with hydraulic shaping head H1... 350 mm

            Smallest pitch height of the hydrostatic screw guide
            - with hydraulic shaping head H1... 850 mm

            Smallest/largest distance between tool and workpiece axis
            - with hydraulic shaping head H1... 0 - 750 mm

            Axial slide adjustment range - with hydraulic shaping head H1... 1.100 mm
            Lowest shaping spindle position above table with hydraulic shaping head H1
            ** with upper position Shaping stroke... 560 mm

            Column side offset range - with hydraulic pusher head H1... +/- 50 mm
            Mould mounting cone - with hydraulic shaping head H1
            - HSK-80(hollow shank taper according to DIN 69063)

            Workpiece with external gearing:
            - Module max. 16 mm,
            - max. toothing width 350 mm,
            - max. external Ø 1.200 mm,

            Workpiece with internal gearing:
            - Module max. 16 mm,
            - max. toothing width 350 mm,
            - max. circulation Ø 1.400 mm,
            - max. internal Ø 1.200 mm,
            - max. shaping wheel Ø 260 mm,
            - Mounting in shaping spindle HSK-80,
            - Slide travel; X/Y/Z- 750 /100 / 1.100 mm,

            Workpiece table:
            - Outer Ø 1.200 mm,
            - bore 300 mm,
            - max. load 150 kN,
            - Cooling unit, Küma, type OWT600-3KK, year 2008,
            - Hydraulic unit, manufactured by Parka,
            - Centrifuge, made by Steimel,
            - Air filter, Indusa, type EL4001NTDASECL/O,
            version AOO, max. air capacity 4.000 m³/h


        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Shaping Machine GLEASON- PFAUTER P 1200 S


          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland

          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03265 · Gear Shaping Machine

          GLEASON- PFAUTER - P 1200 S - - 2008 - Sinumerik 840 D

          Technical details
          max. wheel diameter 1200 mm︱gear width 350 mm︱max. module 16 ︱control Sinumerik 840 D ︱max. swing diameter 1400 mm︱max. table load 15000 kg︱table bore diameter 300 mm︱table diameter 1200 mm︱total power requirement 150 kW︱weight of the machine ca. 24 t︱dimensions of the machine ca. m︱
          Workpiece with external gearing Largest modulus (in steel with approx. 600N/mm²) 16 mm - Maximum gear width 350 mm - Largest outside diameter 1. 200 mm Workpiece with internal gearing Largest modulu (in steel with approx. 600N/mm²) 16 mm - Maximum gear width 350 mm - Maximum swing diameter 1. 400 mm - Maximum inner diameter 1. 200 mm Tool - Maximum impeller diameter 260 mm - Stroke length 50 mm – 380 mm Equipment/Accessoires: Special version with hydraulic cutting head H1 workpiece diameter: External gears 1. 200 mm Internal gears 1. 200 mm Largest workpiece swing diameter - without steady rest 1. 400 mm Oil mist exhauster „3nine“ type KLARA Cutting wheel holder (3 pieces) Measuring device for machine P 1. 200 S
            max. wheel diameter 1200 mm
            gear width 350 mm
            max. module 16
            control Sinumerik 840 D
            max. swing diameter 1400 mm
            max. table load 15000 kg
            table bore diameter 300 mm
            table diameter 1200 mm
            total power requirement 150 kW
            weight of the machine ca. 24 t
            Description :
            Workpiece with external gearing
            Largest modulus (in steel with approx. 600N/mm²) 16 mm
            - Maximum gear width 350 mm
            - Largest outside diameter 1. 200 mm
            Workpiece with internal gearing
            Largest modulu (in steel with approx. 600N/mm²) 16 mm
            - Maximum gear width 350 mm
            - Maximum swing diameter 1. 400 mm
            - Maximum inner diameter 1. 200 mm
            Tool
            - Maximum impeller diameter 260 mm
            - Stroke length 50 mm – 380 mm

            Equipment/Accessoires:
            Special version with hydraulic cutting head H1
            workpiece diameter:
            External gears 1. 200 mm
            Internal gears 1. 200 mm
            Largest workpiece swing diameter
            - without steady rest 1. 400 mm
            Oil mist exhauster „3nine“ type KLARA
            Cutting wheel holder (3 pieces)
            Measuring device for machine P 1. 200 S



        • Leyendecker & Hollmann GmbH
        • Giesenheide 18
        • 40724 Hilden
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Shaping Machine GLEASON-Pfauter GP 130 S


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-24003 · Gear Shaping Machine

          GLEASON-Pfauter - GP 130 S - - 2005 - Siemens 840 D

          Technical details
          max. wheel diameter 130 mm︱gear width 25 mm︱max. module 4 ︱min. module 0,5 ︱Control Siemens 840 D︱strokes - infinitely variable 500-2500 Hub/min︱stroke 30 mm︱work-spindle diameter 85 mm︱total power requirement 49 kW︱weight of the machine ca. 11,5 t︱dimensions of the machine ca. 6,4x4,5x4,4 m︱
          Counterhold without center hydraulically operated counter arm and Linear guides. For automatic ring loader, with 4 stations
            max. wheel diameter 130 mm
            gear width 25 mm
            max. module 4
            min. module 0,5
            Control Siemens 840 D
            strokes - infinitely variable 500-2500 Hub/min
            stroke 30 mm
            work-spindle diameter 85 mm
            total power requirement 49 kW
            weight of the machine ca. 11,5 t
            dimensions of the machine ca. 6,4x4,5x4,4 m
            Description :
            Counterhold without center
            hydraulically operated counter arm and
            Linear guides.
            For automatic ring loader, with 4 stations



        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Shaping Machine LIEBHERR LS 122


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17457 · Gear Shaping Machine

          LIEBHERR - LS 122 - - 2002 - SINUMERIK 840 D

          Technical details
          max. wheel diameter 125 mm︱max. module 3 ︱max. width of spur-gears 24 mm︱Control SINUMERIK 840 D ︱table diameter 145 mm︱table hole 80 mm︱rotary table speeds infinitely variable 0,03 - 50 U/min︱Distance of shafts -25 bis +180 mm︱pivoting angle 12 Grad︱max.helical angle 45 °︱number of strokes (double strokes) 1.500 - 3.000 DH/min︱work spindle speeds min./max. 0,0076 - 43 U/min︱stroke position adjustment 70 mm︱length of stroke min./max. 0 - 30 mm︱work-spindle diameter 85 mm︱taper of shaper cutter HSK 80 B ︱power capacity 7,5 kW︱total power requirement 30 KVA︱weight of the machine ca. 8 t︱dimensions of the machine ca. 4,3 x 2,8 x 2,9 m︱
          Tool: number of teeth = 1 - 200 module min. 0.05 Workpiece: number of teeth = 1 - 1500 module min. 0.05 Counter holder rotatable with 4 positions automatic workpiece changing device Linear workpiece conveyor
            max. wheel diameter 125 mm
            max. module 3
            max. width of spur-gears 24 mm
            Control SINUMERIK 840 D
            table diameter 145 mm
            table hole 80 mm
            rotary table speeds infinitely v. 0,03 - 50 U/min
            Distance of shafts -25 bis +180 mm
            pivoting angle 12 Grad
            max.helical angle 45 °
            number of strokes (double stroke. 1.500 - 3.000 DH/min
            work spindle speeds min./max. 0,0076 - 43 U/min
            stroke position adjustment 70 mm
            length of stroke min./max. 0 - 30 mm
            work-spindle diameter 85 mm
            taper of shaper cutter HSK 80 B
            power capacity 7,5 kW
            total power requirement 30 KVA
            weight of the machine ca. 8 t
            dimensions of the machine ca. 4,3 x 2,8 x 2,9 m
            Description :
            Tool: number of teeth = 1 - 200 module min. 0.05
            Workpiece: number of teeth = 1 - 1500 module min. 0.05
            Counter holder rotatable with 4 positions
            automatic workpiece changing device
            Linear workpiece conveyor


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Shaping Machine LIEBHERR LS 122


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17456 · Gear Shaping Machine

          LIEBHERR - LS 122 - - 2002 - SINUMERIK 840 D

          Technical details
          max. wheel diameter 125 mm︱max. module 3 ︱max. width of spur-gears 24 mm︱Control SINUMERIK 840 D ︱table diameter 145 mm︱table hole 80 mm︱rotary table speeds infinitely variable 0,03 - 50 U/min︱Distance of shafts -25 bis +180 mm︱pivoting angle 12 Grad︱max.helical angle 45 °︱number of strokes (double strokes) 1.500 - 3.000 DH/min︱work spindle speeds min./max. 0,0076 - 43 U/min︱stroke position adjustment 70 mm︱length of stroke min./max. 0 - 30 mm︱work-spindle diameter 85 mm︱taper of shaper cutter HSK 80 B ︱power capacity 7,5 kW︱total power requirement 30 KVA︱weight of the machine ca. 8 t︱dimensions of the machine ca. 4,3 x 2,8 x 2,9 m︱
          Tool: number of teeth = 1 - 200 module min. 0.05 Workpiece: number of teeth = 1 - 1500 module min. 0.05 Counter holder rotatable with 4 positions Automatic workpiece changing device Linear workpiece conveyor
            max. wheel diameter 125 mm
            max. module 3
            max. width of spur-gears 24 mm
            Control SINUMERIK 840 D
            table diameter 145 mm
            table hole 80 mm
            rotary table speeds infinitely v. 0,03 - 50 U/min
            Distance of shafts -25 bis +180 mm
            pivoting angle 12 Grad
            max.helical angle 45 °
            number of strokes (double stroke. 1.500 - 3.000 DH/min
            work spindle speeds min./max. 0,0076 - 43 U/min
            stroke position adjustment 70 mm
            length of stroke min./max. 0 - 30 mm
            work-spindle diameter 85 mm
            taper of shaper cutter HSK 80 B
            power capacity 7,5 kW
            total power requirement 30 KVA
            weight of the machine ca. 8 t
            dimensions of the machine ca. 4,3 x 2,8 x 2,9 m
            Description :
            Tool: number of teeth = 1 - 200 module min. 0.05
            Workpiece: number of teeth = 1 - 1500 module min. 0.05
            Counter holder rotatable with 4 positions
            Automatic workpiece changing device
            Linear workpiece conveyor


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Shaping Machine LORENZ LS 82


          • FLECKENSTEIN Werkzeugmaschinen GmbH
          • Sommerweg 15
          • 63831 Wiesen
          • Deutschland

          • +49 (0) 6096 9706 0
            +49 (0) 6096 9706 20
          • fleckenstein@fleckenstein-machine.com
            www.fleckenstein-machine.com
          #1118-1554 · Gear Shaping Machine

          LORENZ - LS 82 - - 1999 - SIEMENS 840 C

          Technical details
          max. wheel diameter 80 mm︱gear width 44 mm︱max. module 5 ︱min. module ︱Control SIEMENS 840 C ︱adjustment axis angle shaping sp. - wp table -0,5 - +0,5 °︱stroke range 250-1.500 DH/min︱centre distance table/shaping spindle -15 bis +170 mm︱max. stroke length 55 mm︱max. helix angle 45 ︱max. tool diameter 180 mm︱feeds: ︱feed rotation axis of workpiece (100 mm wp diam.) mm/min︱feed rotation axis of work piece (100 mm wp. diam. 10-15.700 mm/min︱feed center axis of machine column 1 - 3.750 mm/min︱ 23 kw︱voltage 400 V︱operating frequency 50 Hz︱control voltage 24 V DC︱total power requirement kW︱
          equipment · stroke positioning adjustment controlled by CNC · stroke length adjustment mechanical-manually · machine is fixed to the ground with specific damping shoes (part of the delivery scope) · oil mist exhaust system · tailstock · shaping spindle and lift of shaping head equipped with hydrostatic bearing
            max. wheel diameter 80 mm
            gear width 44 mm
            max. module 5
            Control SIEMENS 840 C
            adjustment axis angle shaping sp. -0,5 - +0,5 °
            stroke range 250-1.500 DH/min
            centre distance table/shaping sp. -15 bis +170 mm
            max. stroke length 55 mm
            max. helix angle 45
            max. tool diameter 180 mm
            feed rotation axis of work piece. 10-15.700 mm/min
            feed center axis of machine colu. 1 - 3.750 mm/min
            23 kw
            voltage 400 V
            operating frequency 50 Hz
            control voltage 24 V DC
            Description :
            equipment
            · stroke positioning adjustment controlled by CNC · stroke length adjustment
            mechanical-manually · machine is fixed to the ground with specific damping
            shoes (part of the delivery scope) · oil mist exhaust system · tailstock ·
            shaping spindle and lift of shaping head equipped with hydrostatic bearing


        • FLECKENSTEIN Werkzeugmaschinen GmbH
        • Sommerweg 15
        • 63831 Wiesen
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Shaping Machine CUGIR-LORENZ MD 631 (LS 630)


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-10722 · Gear Shaping Machine

          CUGIR-LORENZ - MD 631 (LS 630) - - 1991/12 -

          Technical details
          max. wheel diameter 650 mm︱gear width 200 mm︱max. module 10 ︱min. module 1 ︱work accuracy DIN 6 ︱clamping table diameter 710 mm︱table bore diameter 150 mm︱number of strokes - stepless 35,5 - 560 c/min︱max. ram stroke 230 mm︱feeds 3,55 - 40 mm/min︱radial feed 0,8 - 9 mm/min︱work-spindle diameter 110 mm︱total power requirement 28,2 kW︱weight of the machine ca. 9 t︱dimensions of the machine ca. 3,8 x 2,3 x 2,5 m︱
          Gear shaping machine for the production of spur gears, for Internal and external gears - Built under licence from LORENZ and identical in construction to LORENZ LS 630 complete Modernisation + overhaul in 2012 with: - new painting - new electrical system from Telemecanique - Counter Holder - Chip conveyor - Coolant unit - change gears Not used in production again after overhaul
            max. wheel diameter 650 mm
            gear width 200 mm
            max. module 10
            min. module 1
            work accuracy DIN 6
            clamping table diameter 710 mm
            table bore diameter 150 mm
            number of strokes - stepless 35,5 - 560 c/min
            max. ram stroke 230 mm
            feeds 3,55 - 40 mm/min
            radial feed 0,8 - 9 mm/min
            work-spindle diameter 110 mm
            total power requirement 28,2 kW
            weight of the machine ca. 9 t
            dimensions of the machine ca. 3,8 x 2,3 x 2,5 m
            Description :
            Gear shaping machine for the production of spur gears, for
            Internal and external gears - Built under licence from LORENZ and identical in
            construction to LORENZ LS 630

            complete Modernisation + overhaul in 2012 with:
            - new painting
            - new electrical system from Telemecanique
            - Counter Holder
            - Chip conveyor
            - Coolant unit
            - change gears

            Not used in production again after overhaul


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Shaping Machine LORENZ LS 424


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-24136 · Gear Shaping Machine

          LORENZ - LS 424 - - 1989 - BWO CNC

          Technical details
          max. wheel diameter 420 mm︱gear width 120 mm︱max. module 8 ︱min. module 0,5 ︱control BWO CNC︱no. of strokes 32-800 Hub/min︱total power requirement 50 kW︱weight of the machine ca. 9 t︱dimensions of the machine ca. 5,3 x 3,9 x 3,4 m︱
          Machines increase 100 mm intermediate plate automatic Hublageverstellung automatic Hublängeverstellung 5 axis controlled machine BWO last type C, D, X, Z, L axes are CNC
            max. wheel diameter 420 mm
            gear width 120 mm
            max. module 8
            min. module 0,5
            control BWO CNC
            no. of strokes 32-800 Hub/min
            total power requirement 50 kW
            weight of the machine ca. 9 t
            dimensions of the machine ca. 5,3 x 3,9 x 3,4 m
            Description :
            Machines increase 100 mm intermediate plate
            automatic Hublageverstellung
            automatic Hublängeverstellung
            5 axis controlled machine BWO last type C, D, X, Z, L axes are CNC


        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Shaping Machine LORENZ LS150


          • ADEM MASCHINEN GMBH
          • Karl-Benz-Straße 1
          • 40764 Langenfeld (Rheinland)
          • Deutschland

          • +49 (0) 2173- 287 77 07
            +49 (0) 2173- 287 77 05
          • adem-maschinen@t-online.de
            www.adem-maschinen.com
          #2000-375 · Gear Shaping Machine

          LORENZ - LS150 - - 1987 -

          Technical details
          max. wheel diameter --- mm︱gear width --- mm︱max. module --- ︱min. module --- ︱total power requirement --- kW︱weight of the machine ca. --- t︱dimensions of the machine ca. --- m︱
            max. wheel diameter --- mm
            gear width --- mm
            max. module ---
            min. module ---
            total power requirement --- kW
            weight of the machine ca. --- t
            dimensions of the machine ca. --- m


        • ADEM MASCHINEN GMBH
        • Karl-Benz-Straße 1
        • 40764 Langenfeld (Rheinland)
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Shaping Machine LORENZ LS 150


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-354158 · Gear Shaping Machine

          LORENZ - LS 150 - - 1980 -

          Technical details
          max. wheel diameter 150 mm︱gear width 42 mm︱max. module 3 ︱min. module 0,5 ︱total power requirement 10 kW︱weight of the machine ca. 6 t︱
          External gears, max. Ø 150 mm (or more) Internal gears, max workpiece Ø, approx. 280 mm Gear width, max. 42 mm Module, max. 0.5 - 3 Length of stroke 0 - 50 mm Adjustment of stroke 0 - 70 mm Distance between shaper spindle and body of machine 250 mm Spindle internal table, approx. 45 mm Strokes, roughing / finishing 450 - 1,250 / 2,500 / min Table Ø 250 mm Table bore 100 mm Distance between table and shaper head, approx. 320 mm Axial travel of workpiece slide, approx. 285 mm Feed range, tooth depth 0.01 - 0.063 mm/stroke Rotary feed 0.125 - 3,150 mm/stroke Total electrical load, approx. 10 kW - 380 V - 50 Hz Weight 6,000 kg Accessories / Special Features * Built-in hydrostatic straight guide. * Built-in raiser plate for raising the shaper head 130 mm. * Hydraulic counter bracket (height-adjustable tailstock, approx. 150 mm) and hydraulic universal workpiece clamping device in the table for workpieces with length of up to approx. 400 mm, probably more by reversing the tailstock. * Automatic change of number of strokes and automatic feed change for roughing and finishing work, in up to 7 steps. * Automatic and motor-driven shaper stroke fixing in the upper position after work is finished. * Separate switch and control cabinet. * Separate hydraulic unit. * Coolant equipment with chip conveyor and chip collection. * Vibration elements. * Various change gears. * Holders for shaper tools. * Completely covered working area, etc. Condition : Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.
            max. wheel diameter 150 mm
            gear width 42 mm
            max. module 3
            min. module 0,5
            total power requirement 10 kW
            weight of the machine ca. 6 t
            Description :
            External gears, max. Ø 150 mm (or more)
            Internal gears, max workpiece Ø, approx. 280 mm
            Gear width, max. 42 mm
            Module, max. 0.5 - 3

            Length of stroke 0 - 50 mm
            Adjustment of stroke 0 - 70 mm
            Distance between shaper spindle and body of machine 250 mm
            Spindle internal table, approx. 45 mm
            Strokes, roughing / finishing 450 - 1,250 / 2,500 / min

            Table Ø 250 mm
            Table bore 100 mm
            Distance between table and shaper head, approx. 320 mm
            Axial travel of workpiece slide, approx. 285 mm

            Feed range, tooth depth 0.01 - 0.063 mm/stroke
            Rotary feed 0.125 - 3,150 mm/stroke

            Total electrical load, approx. 10 kW - 380 V - 50 Hz
            Weight 6,000 kg

            Accessories / Special Features
            * Built-in hydrostatic straight guide.
            * Built-in raiser plate for raising the shaper head 130 mm.
            * Hydraulic counter bracket (height-adjustable tailstock, approx. 150 mm) and hydraulic universal workpiece clamping device in the table for workpieces with length of up to approx. 400 mm, probably more by reversing the tailstock.
            * Automatic change of number of strokes and automatic feed change for roughing and finishing work, in up to 7 steps.
            * Automatic and motor-driven shaper stroke fixing in the upper position after work is finished.
            * Separate switch and control cabinet. * Separate hydraulic unit.
            * Coolant equipment with chip conveyor and chip collection. * Vibration elements.
            * Various change gears. * Holders for shaper tools. * Completely covered working area, etc.


            Condition : Good. Machine can be inspected under power.
            Delivery : Ex stock, as inspected.
            Payment : Net, after conclusion of contract.

            Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Shaping Machine LORENZ LS 400


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-537237 · Gear Shaping Machine

          LORENZ - LS 400 - - 1974 -

          Technical details
          max. wheel diameter 400 mm︱gear width 75 mm︱max. module 0,5 ︱min. module 60 ︱total power requirement 25 kW︱weight of the machine ca. 7 t︱dimensions of the machine ca. m︱
          L O R E N Z (Germany) High Performance Automatic Gear Shaper Model LS 400 Year 1975 Serial No. 12 592 _________________________________________________________________________________ External gear, max. Ø 400 mm (possibly larger) Internal gear dia. 350 mm Gear width, max. 75 mm Module range 0.5 - 6 Length of stroke 82 mm Adjustment of stroke position 0 - 100 mm Distance between shaper spindle and machine body 250 mm Spindle taper MK 5 No. of strokes, roughing/finishing process 118 - 1,000 per min Table size 400 mm Table bore 125 mm Mounting height between table and shaper head 190 / 290 mm Axial travel of tool slide, approx. 295 mm No. of teeth, approx. 12-150 Feed range, tooth depth 0.01 - 0.063 mm/stroke Feed range, rotary feed by Tool-Ø 125 0.125 - 3.15 mm/stroke Spindle drive, approx. 19 kW Total electrical load, approx. 25 kW - 380 V - 50 Hz Weight 7,000 kg Accessories / Special Features * Hydrostatic straight guides with separate hydraulic aggregate. * Built-in raiser plate approx. 100 mm to increase height of shaper head. * Hydraulic universal workpiece clamping device built by RINGSPANN to clamp ring shaped workpieces on the inner diameter with various inserts to accommodate different workpiece diameters. * Stepless Regulation of number of strokes for improving roughing and finishing process * Automatic changeover of number of strokes, and automatic feed changeover for roughing and finishing work in up to 3 cuts. * Automatic and motor-driven fixing of shaping stroke in the upper position after work is finished. * Separate switch and control cabinet. Two-hand start. * Coolant equipment with magnetic chip conveyor and chip collection container. * Various change gears, shaping tool holders, etc. Condition : Satisfactory to Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We always have a good selection of gear machines on stock. Please let us know what you need.
            max. wheel diameter 400 mm
            gear width 75 mm
            max. module 0,5
            min. module 60
            total power requirement 25 kW
            weight of the machine ca. 7 t
            Description :
            L O R E N Z (Germany)
            High Performance Automatic Gear Shaper
            Model LS 400 Year 1975 Serial No. 12 592
            _________________________________________________________________________________

            External gear, max. Ø 400 mm (possibly larger)
            Internal gear dia. 350 mm
            Gear width, max. 75 mm
            Module range 0.5 - 6

            Length of stroke 82 mm
            Adjustment of stroke position 0 - 100 mm
            Distance between shaper spindle and machine body 250 mm
            Spindle taper MK 5
            No. of strokes, roughing/finishing process 118 - 1,000 per min

            Table size 400 mm
            Table bore 125 mm
            Mounting height between table and shaper head 190 / 290 mm
            Axial travel of tool slide, approx. 295 mm

            No. of teeth, approx. 12-150
            Feed range, tooth depth 0.01 - 0.063 mm/stroke
            Feed range, rotary feed by Tool-Ø 125 0.125 - 3.15 mm/stroke

            Spindle drive, approx. 19 kW
            Total electrical load, approx. 25 kW - 380 V - 50 Hz
            Weight 7,000 kg

            Accessories / Special Features
            * Hydrostatic straight guides with separate hydraulic aggregate.
            * Built-in raiser plate approx. 100 mm to increase height of shaper head.
            * Hydraulic universal workpiece clamping device built by RINGSPANN to clamp
            ring shaped workpieces on the inner diameter with various inserts to accommodate
            different workpiece diameters.
            * Stepless Regulation of number of strokes for improving roughing and finishing process
            * Automatic changeover of number of strokes, and automatic feed changeover for roughing
            and finishing work in up to 3 cuts.
            * Automatic and motor-driven fixing of shaping stroke in the upper position after work is finished.
            * Separate switch and control cabinet. Two-hand start.
            * Coolant equipment with magnetic chip conveyor and chip collection container.
            * Various change gears, shaping tool holders, etc.

            Condition : Satisfactory to Good. Machine can be inspected under power.
            Delivery : Ex stock, as inspected.
            Payment : Net, after conclusion of contract.

            Thank you for your interest. We always have a good selection of gear machines on stock.
            Please let us know what you need.



        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Shaping Machine LORENZ LS 400


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-574652 · Gear Shaping Machine

          LORENZ - LS 400 - - 1973 -

          Technical details
          max. wheel diameter 400 mm︱gear width 75 mm︱max. module 0,5 ︱min. module 6 ︱total power requirement 25 kW︱weight of the machine ca. 7000 kg︱dimensions of the machine ca. m︱
            max. wheel diameter 400 mm
            gear width 75 mm
            max. module 0,5
            min. module 6
            total power requirement 25 kW
            weight of the machine ca. 7000 kg


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Shaping Machine LIEBHERR WS 1


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-052076 · Gear Shaping Machine

          LIEBHERR - WS 1 - - 1969 -

          Technical details
          max. wheel diameter 265 mm︱gear width 45 mm︱max. module 4 ︱min. module 0,3 ︱max. workpiece diameter 300 mm︱stroke length max. 0-50 mm︱stroke position adjustment 25 mm︱distance work spindle /surface of the table 170/245 mm︱spindle taper innen MK 4 ︱table-size 180 mm︱table hole 95/75 mm︱strokes per minute 450 - 840 ︱total power requirement 10 kW︱weight of the machine ca. 5200 kg︱dimensions of the machine ca. m︱
          Max. gear Æ (external) approx. 265 mm Max. workpiece Æ for internal gears 300 mm Max. gear width 45 mm Module range 0.3 - 4 Length of stroke 0 - 50 mm Adjustment of length of stroke 25 mm Distance between table and spindle, min./max. 170/245 mm Spindle taper (external 90 / internal 50) MT 4 Table size 180 mm Table bore 95 / 75 mm Table travel, cross, approx. 175 mm Number of strokes, infinitely variable 450 - 840 /min Feed range 0.09 - 0.6 mm/stroke Rotary feed, strokes per cutter revolution 2,722 - 681 Total electrical load 10 kW - 380 V - 50 Hz Weight 5,200 kg Accessories / Special Features * Selection switch for various working programmes, and for manual control. * Multi-cut device for roughing, finishing and sparkout, via presettable micrometer screws. * Hydraulic workpiece external clamping device mounted on table, for internal gears (a sort of collet chuck). * Separate switch cabinet. * Separate hydraulic unit. * Hydrostatic straight guide, with cooling aggregate for the hydrostatic pressure oil, separate. * Lateral table adjustment ensures optimal ram lift from workpiece. * Infinitely variable number of strokes via DC motor. * Built-on coolant device. * Presettable impulse counter for switching off table after every cut. With digital display. * Various change gears.
            max. wheel diameter 265 mm
            gear width 45 mm
            max. module 4
            min. module 0,3
            max. workpiece diameter 300 mm
            stroke length max. 0-50 mm
            stroke position adjustment 25 mm
            distance work spindle /surface o. 170/245 mm
            spindle taper innen MK 4
            table-size 180 mm
            table hole 95/75 mm
            strokes per minute 450 - 840
            total power requirement 10 kW
            weight of the machine ca. 5200 kg
            Description :
            Max. gear Æ (external) approx. 265 mm
            Max. workpiece Æ for internal gears 300 mm
            Max. gear width 45 mm
            Module range 0.3 - 4

            Length of stroke 0 - 50 mm
            Adjustment of length of stroke 25 mm
            Distance between table and spindle, min./max. 170/245 mm

            Spindle taper (external 90 / internal 50) MT 4

            Table size 180 mm
            Table bore 95 / 75 mm
            Table travel, cross, approx. 175 mm

            Number of strokes, infinitely variable 450 - 840 /min
            Feed range 0.09 - 0.6 mm/stroke
            Rotary feed, strokes per cutter revolution 2,722 - 681

            Total electrical load 10 kW - 380 V - 50 Hz
            Weight 5,200 kg

            Accessories / Special Features
            * Selection switch for various working programmes, and for
            manual control.
            * Multi-cut device for roughing, finishing and sparkout,
            via presettable micrometer screws.
            * Hydraulic workpiece external clamping device mounted on table,
            for internal gears (a sort of collet chuck).
            * Separate switch cabinet. * Separate hydraulic unit.
            * Hydrostatic straight guide, with cooling aggregate for the
            hydrostatic pressure oil, separate.
            * Lateral table adjustment ensures optimal ram lift from workpiece.
            * Infinitely variable number of strokes via DC motor.
            * Built-on coolant device.
            * Presettable impulse counter for switching off table after every
            cut. With digital display.
            * Various change gears.


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Shaping Machine LORENZ SNJ 5


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E23068 · Gear Shaping Machine

          LORENZ - SNJ 5 - - -

          Technical details
          max. wheel diameter 500 mm︱gear width 75 mm︱max. module 5 ︱min. module 0,5 ︱no. of strokes 45 - 424 Hub/min︱total power requirement 6 kW︱weight of the machine ca. 3,6 t︱dimensions of the machine ca. 2,0 x 1,4 x 2,3 m︱
          Rapid traverse in the table.
            max. wheel diameter 500 mm
            gear width 75 mm
            max. module 5
            min. module 0,5
            no. of strokes 45 - 424 Hub/min
            total power requirement 6 kW
            weight of the machine ca. 3,6 t
            dimensions of the machine ca. 2,0 x 1,4 x 2,3 m
            Description :
            Rapid traverse in the table.


        • Emuk Maschinenhandel GmbH
        • Siemensstrasse 24
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Shaping Machine LORENZ SV00


          • MW-MACHINES
          • Dorf 9
          • 4133 Hofkirchen
          • Österreich

          • +43 (0)66718068977
            -
          • info@machines-mw.at
            machines-mw.at
          #2077-60002 · Gear Shaping Machine

          LORENZ - SV00 - - -

          Technical details
          max. wheel diameter 180 mm︱gear width 45 mm︱max. module 4 ︱no. of ram strokes 520 ︱length of stroke min./max. 10-55 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            max. wheel diameter 180 mm
            gear width 45 mm
            max. module 4
            no. of ram strokes 520
            length of stroke min./max. 10-55 mm


        • MW-MACHINES
        • Dorf 9
        • 4133 Hofkirchen
        • Österreich

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Shaping Machine LORENZ LS 304


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E23083 · Gear Shaping Machine

          LORENZ - LS 304 - - - BWO CNC 921

          Technical details
          max. wheel diameter 300 / 400 mm︱gear width 76 mm︱max. module 6 ︱min. module 0,5 ︱Control BWO CNC 921 ︱adjustment of stroke position 94 mm/Hub︱stroke 82 mm︱no. of strokes 75 - 1000 Hub/min︱number of teeth 5 - 200 ︱taper of shaper cutter SK 45 ︱table diameter 400 mm︱total power requirement 50 kW︱weight of the machine ca. 7,5 t︱dimensions of the machine ca. 5,0 x 3,8 x 3,4 m︱
          Machine in top condition. More machines under www.emuk.info
            max. wheel diameter 300 / 400 mm
            gear width 76 mm
            max. module 6
            min. module 0,5
            Control BWO CNC 921
            adjustment of stroke position 94 mm/Hub
            stroke 82 mm
            no. of strokes 75 - 1000 Hub/min
            number of teeth 5 - 200
            taper of shaper cutter SK 45
            table diameter 400 mm
            total power requirement 50 kW
            weight of the machine ca. 7,5 t
            dimensions of the machine ca. 5,0 x 3,8 x 3,4 m
            Description :
            Machine in top condition.
            More machines under www.emuk.info


        • Emuk Maschinenhandel GmbH
        • Siemensstrasse 24
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Shaping Machine LORENZ S8 / 630


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E22008 · Gear Shaping Machine

          LORENZ - S8 / 630 - - -

          Technical details
          max. wheel diameter 630 mm︱gear width 180 mm︱max. module 8 ︱min. module 1 ︱table bore diameter 160 mm︱no. of strokes 47 - 300 Hub/min︱dia. of shaper cutter 125 mm︱dayligth 100 - 330 mm︱workpiece diameter 0 - 750 mm︱stroke length max. 200 mm︱total power requirement 12 kW︱weight of the machine ca. 5,8 t︱dimensions of the machine ca. 2,5 x 2,1 x 3,1 m︱
          The design of the LORENZ S8 represents a further development of model S7/500, which was successful over many years. A considerable increase in driving power, reinforced cast iron bodies and gearing units, easy service by push button-control, automatic change of stroke speed as well as circulation system lubrication for all moving parts correspond to the demands of a modern gear cutting machine. The machine is suitable for internal- and external gears. The capacity has been adapted to experience and has been extended to the following maximum values. Raizor block 150 mm, table clamping, tailstock, chip conveyor, change gears, manuals,toolholders, ....
            max. wheel diameter 630 mm
            gear width 180 mm
            max. module 8
            min. module 1
            table bore diameter 160 mm
            no. of strokes 47 - 300 Hub/min
            dia. of shaper cutter 125 mm
            dayligth 100 - 330 mm
            workpiece diameter 0 - 750 mm
            stroke length max. 200 mm
            total power requirement 12 kW
            weight of the machine ca. 5,8 t
            dimensions of the machine ca. 2,5 x 2,1 x 3,1 m
            Description :
            The design of the LORENZ S8 represents a further development of model S7/500,
            which was successful over many years.
            A considerable increase in driving power, reinforced cast iron bodies and
            gearing units, easy service by push button-control, automatic change of stroke
            speed as well as circulation system lubrication for all moving parts correspond
            to the demands of a modern gear cutting machine.
            The machine is suitable for internal- and external gears. The capacity has been
            adapted to experience and has been extended to the following maximum values.
            Raizor block 150 mm, table clamping, tailstock, chip conveyor, change gears,
            manuals,toolholders, ....


        • Emuk Maschinenhandel GmbH
        • Siemensstrasse 24
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Shaping Machine LORENZ SNJ 5


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E22066 · Gear Shaping Machine

          LORENZ - SNJ 5 - - -

          Technical details
          max. wheel diameter 500 mm︱gear width 75 mm︱max. module 5 ︱min. module 0,5 ︱no. of strokes 45 - 424 Hub/min︱total power requirement 6 kW︱weight of the machine ca. 3,6 t︱dimensions of the machine ca. 2,0 x 1,4 x 2,3 m︱
          Rapid traverse in the table.
            max. wheel diameter 500 mm
            gear width 75 mm
            max. module 5
            min. module 0,5
            no. of strokes 45 - 424 Hub/min
            total power requirement 6 kW
            weight of the machine ca. 3,6 t
            dimensions of the machine ca. 2,0 x 1,4 x 2,3 m
            Description :
            Rapid traverse in the table.


        • Emuk Maschinenhandel GmbH
        • Siemensstrasse 24
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

          TOP Manufacturer: