Bevel Gear Testing Machine
Machinelist: Bevel Gear Testing Machine
Bevel Gear Testing Machine
- EMUK GmbH Werkzeugmaschinen
- Siemensstrasse 24 a
- 76316 Malsch
- Deutschland
-
+49 (0) 7246 1392
+49 (0) 7246 1394 -
info@emuk.de
www.emuk.de
#1058-24163 · Bevel Gear Testing Machine
KLINGELNBERG - T60A - - 2007 - Fanuc 16
Technical details
Datasheet
Request / Contact
- Amann Werkzeugmaschinen GmbH
- Landshuter Straße 1
- 85716 Unterschleißheim
- Deutschland
-
(0049) 89 317754 0
(0049) 89 3174262 -
info@amann-wzm.de
www.amann-wzm.de
#1006-18006 · Bevel Gear Testing Machine
OERLIKON - T50 - - 2001 -
Technical details
The Oerlikon T50 is a 3-axis CNC testing machine for fully automatic hard and soft testing of spiral and hypoid bevel gears with an axle angle of 90° Bevel gear analysis ROTEC T50 GA2 Color unit company Binks
Datasheet
Request / Contact
- HANS - JÜRGEN GEIGER
- James-Watt-Str. 12
- 72555 Metzingen
- Deutschland
-
(0049)-7123-18040
(0049)-7123-18384 -
geiger@geiger-germany.com
www.geiger-germany.com
#1049-385316 · Bevel Gear Testing Machine
GLEASON - 513 - - 1975 -
Technical details
G L E A S O N (USA) Hypoid Spiral Bevel Gear Running Testing Machine Model 513 TESTER, Year 1975, Serial No. 721607 This machine is very suitable for precision production testing of spiral and hypoid bevel gears with shaft angle 90°. The gear spindle is vertical and the pinion spindle is horizontal. The pinion cone distance can be adjusted while the machine is working in order to find the optimal mounting position whereby the gear is "loaded" with a preset torque. The axial pinion position can be adjusted until the quietest meshing position of the traction flank is found. Likewise, the thrust flank can be tested during the return run. Marking compound is sprayed on both sides of the teeth so the flank contact pattern can be seen. Working cycles, as well as the positioning in the tooth gap, are automatic. The gear quality can be assessed by recording the harmonic frequencies, which are displayed on a separate monitor and which can be analyzed with a RHF Control. Machine can be used for soft testing of production parts, as well as for mating sets of hardened gears and pinions prior to lapping, and for final testing after lapping to select the optimum pinion mounting distance. Also ideal for lab work, processing, and quality control. Max. gear outside diameter, approx. 508 mm Max. pinion outside diameter, approx. 254 mm Axial cross angle 90 ° Offset of pinion spindle above/below gear spindle, max. 102 mm Diameter of taper hole, pinion spindle 99/95 mm Diameter of taper hole, gear spindle 56/55 mm Speeds of pinion spindle, infinitely variable 0 - 1,250 rpm Speeds of gear spindle, infinitely variable 0 - 1,250 rpm Spindle drive, approx. 5 / 7.5 kW Total electrical load, approx. 15 kW - 380 V - 50 Hz Accessories / Special Features * Large display for 1 / 2 / 3 harmonies, display for pinion distance, pinion speed, as well of gear torque in kg/torque, etc. * Hydraulic workpiece clamping. * Hydraulic slide clamping. * Tank for marking compound with mixer and pump, separate. * Separate switch cabinet. * Separate hydraulic unit. * Lots of spare parts, spare motors, etc. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.
Cold Rolling Machine
- Kemmerich Werkzeugmaschinen
- Im Rottfeld 1a
- 40789 Monheim am Rhein
- Deutschland
-
+49 2173 207474
+49 2173 207473 -
info@kemmerich.biz
www.kemmerich.biz
#1020-20120 · Cold Rolling Machine
KOVOSIT MAS - Roller 2800 CNC - - 2018 - Siemens 840 D
Technical details
Cold Rolling Machine The function of the machine lies in the technology of cold forming - rolling of cylindrical, conical and transition radius surfaces of shaft components, e.g. vehicle axles. Among other things, this function predetermines the area of ??application of the machine for specialized production of parts using surface strengthening technology, always perpendicular to the surface of the rolling tool to the material surface by means of the B-axis tilting mechanism controlled by the CNC system. he locking of the rolling heads in a given position is ensured by a drive with self-locking worm gearboxes. The rolling equipment is located on a longitudinal support. The slide moves along the machine bed in the longitudinal direction by means of a CNC- controlled Z axis. The movement in the X-axis is realized hydraulically by two quill of rolling heads placed against each other, into which the rolling tools themselves are clamped. Continuous pressure changes on the rolling tools can be changed in the program during the work cycle. The system enables indirect independent measurement of rolling force, recording and archiving of rolling process data. equipted with : - CNC control Siemens Sinumerik model 840D - Tailstock - Hydraulic Unit - Lubrication Range of multi-roller power: 1-50kN - Max. power of multi-roller with using of tilting B-axes (B = ± 35°: 20kN - Max. power of multi-roller without using of tilting B-axes (B = 0°): 50kN Axis B: - Ratio of worm-gear unit: 1:40 - Ratio of spur gearing of tilting mechanism: 1:12
Datasheet
Request / Contact
- Leyendecker & Hollmann GmbH
- Giesenheide 18
- 40724 Hilden
- Deutschland
-
+49 (2103) 28097-0
+49 (2103) 28097-99 -
info@LHmachine.com
www.LHmachine.com
#1083-03273 · Cold Rolling Machine
EXCELLO / Boehringer - XK 837 - - 2009 - Siemens 840 D
Technical details
- HANS - JÜRGEN GEIGER
- James-Watt-Str. 12
- 72555 Metzingen
- Deutschland
-
(0049)-7123-18040
(0049)-7123-18384 -
geiger@geiger-germany.com
www.geiger-germany.com
#1049-346254 · Cold Rolling Machine
EX-CELL-O - XK 225 - - 1987 -
Technical details
Max.Ø tool slide stroke 760 mm Max.Ø rack length 610 mm Length of workpiece between centres, approx. 500 mm Max. tooth width / profile width 92 mm Max. workpiece Ø 38 mm Tailstock stroke on outboard support, hydraulic, approx. 500 mm Module range 0.3 - 1.3 Total electrical load, approx. 24 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features * KBH Workpiece Feed Device, standing parallel to the machine, at present set-up for feed-in and feed-out of shaft-formed workpieces, approx. Ø 16 x 200 mm long, with prism conveyor belt and lifting station for 2 shafts (blank and finished part), as well as workpiece positioning control. * Originally, external gears were formed on the machine using pinion cages (no. of teeth = 25), Ø approx. 32 mm x 14 mm long, workpiece Ø approx. 80 x 80 mm long. * Various accessories: * Separate switch cabinet. * Separate hydraulic unit, 900 l. * Coolant device in the machine. * Control panel with malfunction message in plaintext, etc. Roto Flo machines are ideal for mass production of smaller gears/profiles. The coldforming process is a lot faster and more economical than other chip removing methods. Workpieces are clamped between 2 live centres and 2 synchronous opposed directional coldforming racks simultaneously engage the workpart and start rotation. During rotation, the profile is formed successively within one stroke. In the calibrating zone, the profiling and surfacing performance of the tool are optimised. Profiles do not require a run-out. The coldforming process requires a rigid and heavy duty construction of the machine, which ensures the required precision over the years. Between 25,000 and 100,000 working cycles can be performed with one set of racks, also for serrations. Condition : Very good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.
- Amann Werkzeugmaschinen GmbH
- Landshuter Straße 1
- 85716 Unterschleißheim
- Deutschland
-
(0049) 89 317754 0
(0049) 89 3174262 -
info@amann-wzm.de
www.amann-wzm.de
#1006-17374 · Cold Rolling Machine
GROB - 95 M - - 1973 -
Technical details
Datasheet
Request / Contact
TOP Manufacturer:
KLINGELNBERG - OERLIKON - GLEASON -