Facing and Centering Lathe

Machinelist: Facing and Centering Lathe

Facing and Centering Lathe

Knops Werkzeugmaschinen
Konrad-Zuse-Straße 5
40789 Monheim
Deutschland

02173 - 39494-0
02173 - 39494-29
maschinen@knops.de
www.knops.de

#1022-E05430 · Facing and Centering Lathe

WMW ZERBST - DP 4000 ... DP 5000 - - retrofit 2014 -

Technical details

turning diameter over bed 5000 mm︱turning diameter over slide rest 4000 mm︱turning length 22000 mm︱total power requirement 36 kW︱weight of the machine ca. 53,5 t︱dimensions of the machine ca. m︱

Facing and Centering Lathe with plate field - Max. Turning diameter over the bed slide 4000 mm - Max. Turning diameter 5000 mm - Max. Turning length: 22000 mm - Face plate speed range 0.9 - 56 rpm - Faceplate diameter 4420 mm - Main motor 30 kw - Torque on the faceplate 61803 Nm - Max. Workpiece weight between the centers: 20 t - Max. workpiece weight -without tailstock: 12,5 t - Two bed slides with 4500 mm turning length - With plate fields - A roller block - With tailstock Machine was overhauled in Italy in 2014 with stepless speed control. After the overhaul, the lathe was no longer operational. Machine is dismantled and stored near Hamburg.

turning diameter over bed 5000 mm

turning diameter over slide rest 4000 mm

turning length 22000 mm

total power requirement 36 kW

weight of the machine ca. 53,5 t

Description :

Facing and Centering Lathe with plate field

- Max. Turning diameter over the bed slide 4000 mm
- Max. Turning diameter 5000 mm
- Max. Turning length: 22000 mm
- Face plate speed range 0.9 - 56 rpm
- Faceplate diameter 4420 mm
- Main motor 30 kw
- Torque on the faceplate 61803 Nm
- Max. Workpiece weight between the centers: 20 t
- Max. workpiece weight -without tailstock: 12,5 t

- Two bed slides with 4500 mm turning length
- With plate fields
- A roller block
- With tailstock

Machine was overhauled in Italy in 2014 with stepless speed control.
After the overhaul, the lathe was no longer operational.

Machine is dismantled and stored near Hamburg.

Datasheet

used Lathes Facing and Centering Lathe WMW Niles DPS1400...DPS1800/1

Jansen Machinehandel BV
Bredaseweg 210
4873 LA Etten-leur
Nederland

+31 (0) 76 5015750
info@jansenmachinehandel.nl
www.jansenmachinehandel.nl

#2049-D362 · Facing and Centering Lathe

WMW Niles - DPS1400...DPS1800/1 - - 1976 -

Technical details

Distance between centers 5000 mm︱Centerheight 1000 mm︱Swing over bed 2500 mm ø︱Swing over support 1700 mm ø︱Jawplate diameter 1250 mm︱Power 34 kW︱Current 116 A︱

3-lane bed 6 claw: 700 mm ø Machine number: 35-0462 Machine weight: +/- 20,000 kg

Distance between centers 5000 mm

Centerheight 1000 mm

Swing over bed 2500 mm ø

Swing over support 1700 mm ø

Jawplate diameter 1250 mm

Power 34 kW

Current 116 A

Description :

3-lane bed
6 claw: 700 mm ø
Machine number: 35-0462
Machine weight: +/- 20,000 kg

Datasheet

used Lathes Facing and Centering Lathe WEVERK Karlstadt PS 12.5

desba TRADING
Im Hofgarten 6
61130 Nidderau
Deutschland

+49 (0)6187 20 30 749
info@desba-trading.de
www.desba-trading.de

#2072-2133 · Facing and Centering Lathe

WEVERK Karlstadt - PS 12.5 - - 1952 -

Technical details

turning diameter over bed 2500 mm︱turning diameter over slide rest 3000 mm︱turning length 5000 mm︱total power requirement 12 kW︱weight of the machine ca. 30 t︱dimensions of the machine ca. m︱

turning diameter over bed 2500 mm

turning diameter over slide rest 3000 mm

turning length 5000 mm

total power requirement 12 kW

weight of the machine ca. 30 t

Datasheet

used Lathes Facing and Centering Lathe JMTCL CW61125B

Jansen Machinehandel BV
Bredaseweg 210
4873 LA Etten-leur
Nederland

+31 (0) 76 5015750
info@jansenmachinehandel.nl
www.jansenmachinehandel.nl

#2049-D273 · Facing and Centering Lathe

JMTCL - CW61125B - - -

Technical details

Distance between centers 1500 mm︱Centerheight 625 mm︱Swing over bed 1250 mm ø︱Swing over support 850 mm ø︱Spindle boring 135 mm ø︱

Digital readout

Distance between centers 1500 mm

Centerheight 625 mm

Swing over bed 1250 mm ø

Swing over support 850 mm ø

Spindle boring 135 mm ø

Description :

Digital readout

Datasheet

used Lathes Facing and Centering Lathe NN

Jansen Machinehandel BV
Bredaseweg 210
4873 LA Etten-leur
Nederland

+31 (0) 76 5015750
info@jansenmachinehandel.nl
www.jansenmachinehandel.nl

#2049-D680 · Facing and Centering Lathe

NN - - - -

Technical details

Centerheight 900 mm︱Swing over bed 1800 mm ø︱Spindle boring 330 mm ø︱

Manipulator Drive by means of V-belts No electric motor available Machine dimensions (LxWxH): 1,100 x 2,100 x 1,500 mm Machine weight: +/- 2.500 kg

Centerheight 900 mm

Swing over bed 1800 mm ø

Spindle boring 330 mm ø

Description :

Manipulator
Drive by means of V-belts
No electric motor available
Machine dimensions (LxWxH): 1,100 x 2,100 x 1,500 mm
Machine weight: +/- 2.500 kg

Datasheet

used Lathes Facing and Centering Lathe Heyligenstaedt

Jansen Machinehandel BV
Bredaseweg 210
4873 LA Etten-leur
Nederland

+31 (0) 76 5015750
info@jansenmachinehandel.nl
www.jansenmachinehandel.nl

#2049-D387 · Facing and Centering Lathe

Heyligenstaedt - - - -

Technical details

Swing over bed 2500 mm ø︱4-Jaw chuck 1250 mm ø︱Power kW︱

No electrical control box available

Swing over bed 2500 mm ø

4-Jaw chuck 1250 mm ø

Description :

No electrical control box available

Datasheet

used Lathes Facing and Centering Lathe Tadu

Jansen Machinehandel BV
Bredaseweg 210
4873 LA Etten-leur
Nederland

+31 (0) 76 5015750
info@jansenmachinehandel.nl
www.jansenmachinehandel.nl

#2049-D720 · Facing and Centering Lathe

Tadu - - - -

Technical details

CNC brand Fagor ︱CNC model 8050 T ︱Swing over bed 2500 mm ø︱4-Jaw chuck 1800 mm ø︱

Center

CNC brand Fagor

CNC model 8050 T

Swing over bed 2500 mm ø

4-Jaw chuck 1800 mm ø

Description :

Center

Datasheet

Jansen Machinehandel BV
Bredaseweg 210
4873 LA Etten-leur
Nederland

+31 (0) 76 5015750
info@jansenmachinehandel.nl
www.jansenmachinehandel.nl

#2049-D618 · Facing and Centering Lathe

Ravensburg - - - -

Technical details

Centerheight 650 mm︱Swing over bed 1300 mm ø︱Maximum turning length 500 mm︱Jawplate diameter 1200 mm︱Power 5,5 kW︱

With grinding device Equipped with new electrical installation

Centerheight 650 mm

Swing over bed 1300 mm ø

Maximum turning length 500 mm

Jawplate diameter 1200 mm

Power 5,5 kW

Description :

With grinding device
Equipped with new electrical installation

Datasheet

Jansen Machinehandel BV
Bredaseweg 210
4873 LA Etten-leur
Nederland

+31 (0) 76 5015750
info@jansenmachinehandel.nl
www.jansenmachinehandel.nl

#2049-D262 · Facing and Centering Lathe

Ravensburg - - - -

Technical details

Swing over bed 1500 mm ø︱Maximum turning length 800 mm︱Jawplate diameter 1300 mm︱

Head can be moved hydraulically Chisel support hydraulically driven

Swing over bed 1500 mm ø

Maximum turning length 800 mm

Jawplate diameter 1300 mm

Description :

Head can be moved hydraulically
Chisel support hydraulically driven

Datasheet

used Lathes Facing and Centering Lathe Heyligenstaedt DW1000

Jansen Machinehandel BV
Bredaseweg 210
4873 LA Etten-leur
Nederland

+31 (0) 76 5015750
info@jansenmachinehandel.nl
www.jansenmachinehandel.nl

#2049-D578 · Facing and Centering Lathe

Heyligenstaedt - DW1000 - - -

Technical details

Centerheight 1000 mm︱Swing over bed 2000 mm ø︱Spindle boring 700 mm ø︱4-Jaw chuck 1900 mm ø︱

Oil country lathe Loose chisel support Electrically movable head: 5,000 mm Center Equipped with new electrical installation

Centerheight 1000 mm

Swing over bed 2000 mm ø

Spindle boring 700 mm ø

4-Jaw chuck 1900 mm ø

Description :

Oil country lathe
Loose chisel support
Electrically movable head: 5,000 mm
Center
Equipped with new electrical installation

Datasheet

Jansen Machinehandel BV
Bredaseweg 210
4873 LA Etten-leur
Nederland

+31 (0) 76 5015750
info@jansenmachinehandel.nl
www.jansenmachinehandel.nl

#2049-D364 · Facing and Centering Lathe

WMW Niles - DPS1400...DPS1800/1 - - -

Technical details

Distance between centers 5000 mm︱Centerheight 700 mm︱Swing over bed 1400 mm ø︱Jawplate diameter 1200 mm︱Power 34 kW︱Current 118 A︱

Machine weight: +/- 19,500 kg

Distance between centers 5000 mm

Centerheight 700 mm

Swing over bed 1400 mm ø

Jawplate diameter 1200 mm

Power 34 kW

Current 118 A

Description :

Machine weight: +/- 19,500 kg

Datasheet

Vertical Turret Lathe - Single Column

ATMH Werkzeugmaschinenhandel GmbH
Scharpenbergerstr.96-98
58256 Ennepetal
Deutschland

+49 (0) 2333 / 403 43 70
+49 (0) 2333 / 403 43 75
info@atmh.de
www.atmh.de

#2065-S3517 · Vertical Turret Lathe - Single Column

JUNGENTHAL - unbekannt - - unbekannt -

Technical details

faceplate diameter 1600 mm︱swing diameter ca. 1800 mm︱turning height ca. 1500 mm︱total power requirement 37 kW︱

faceplate diameter 1600 mm

swing diameter ca. 1800 mm

turning height ca. 1500 mm

total power requirement 37 kW

Description :

Datasheet

used Lathes Vertical Turret Lathe - Single Column BERTHIEZ BM 225

ATMH Werkzeugmaschinenhandel GmbH
Scharpenbergerstr.96-98
58256 Ennepetal
Deutschland

+49 (0) 2333 / 403 43 70
+49 (0) 2333 / 403 43 75
info@atmh.de
www.atmh.de

#2065-S55000 · Vertical Turret Lathe - Single Column

BERTHIEZ - BM 225 - - unbekannt -

Technical details

faceplate diameter 2250 mm︱swing diameter 4500 mm︱turning height 2000 mm︱turning diameter 3150 mm︱workpiece weight max. 25000 kg︱total power requirement 55 kW︱weight of the machine ca. ca. 32 t︱required space / m︱

faceplate diameter 2250 mm

swing diameter 4500 mm

turning height 2000 mm

turning diameter 3150 mm

workpiece weight max. 25000 kg

total power requirement 55 kW

weight of the machine ca. ca. 32 t

required space / m

Datasheet

used Lathes Vertical Turret Lathe - Single Column FKD-FEICHTER FKD 30 CNC

Kraft Werkzeugmaschinen GmbH
Wilhelmstraße 20
64589 Stockstadt
Deutschland

+49 (0) 6158/9999975
nr@kraft-werkzeugmaschinen.de
www.kraft-werkzeugmaschinen.de

#4019-161014 · Vertical Turret Lathe - Single Column

FKD-FEICHTER - FKD 30 CNC - - neu - Siemens 840D

Technical details

faceplate diameter 3000 mm︱swing diameter 3400 mm︱turning height 3000 mm︱max. turning diameter 3400 mm︱max. workpiece weight 25 t︱weight of the machine ca. 105 t︱Dimensions (L/W/H) 6450x7500x6950 mm︱

faceplate diameter 3000 mm

swing diameter 3400 mm

turning height 3000 mm

max. turning diameter 3400 mm

max. workpiece weight 25 t

weight of the machine ca. 105 t

Dimensions (L/W/H) 6450x7500x6950 mm

Datasheet

used Lathes Vertical Turret Lathe - Single Column KRAFT KDM-80

Kraft Werkzeugmaschinen GmbH
Wilhelmstraße 20
64589 Stockstadt
Deutschland

+49 (0) 6158/9999975
nr@kraft-werkzeugmaschinen.de
www.kraft-werkzeugmaschinen.de

#4019-91921 · Vertical Turret Lathe - Single Column

KRAFT - KDM-80 - - Fabrikneu - Siemens/Fanuc/Fagor

Technical details

faceplate diameter 6300 mm︱swing diameter 8000 mm︱turning height 4000 mm︱workpiece weight 120 t︱table speeds 0.2-16 U/min (2 Stufen) ︱max. torque on the faceplate 200/460 k.Nm︱slide stroke vertikal: 2500 mm︱slide stroke horizontal: 4350 mm︱cross section of ram 280x280 mm︱Max. cutting force of tool head links: 63 kN / rechts: 80 ︱Cross rail travel 2000 mm︱rapid feed cross beam 300 mm/min︱feed stepless X-Achse: 1-500 mm/min︱main drive 110 kW︱weight of the machine ca. 190 t︱Machine size (LxWxH) 11000x9000x8000 mm︱control Siemens 828D/Siemens 840D ︱︱︱︱

for more information please check attached pdf file on the right hand side

faceplate diameter 6300 mm

swing diameter 8000 mm

turning height 4000 mm

workpiece weight 120 t

table speeds 0.2-16 U/min (2 Stufen)

max. torque on the faceplate 200/460 k.Nm

slide stroke vertikal: 2500 mm

slide stroke horizontal: 4350 mm

cross section of ram 280x280 mm

Max. cutting force of tool head links: 63 kN / rechts: 80

Cross rail travel 2000 mm

rapid feed cross beam 300 mm/min

feed stepless X-Achse: 1-500 mm/min

main drive 110 kW

weight of the machine ca. 190 t

Machine size (LxWxH) 11000x9000x8000 mm

control Siemens 828D/Siemens 840D

Description :

for more information please check attached pdf file on the right hand side

Datasheet

used Lathes Vertical Turret Lathe - Single Column KRAFT KDM-K 40 | KDM-K 50

Kraft Werkzeugmaschinen GmbH
Wilhelmstraße 20
64589 Stockstadt
Deutschland

+49 (0) 6158/9999975
nr@kraft-werkzeugmaschinen.de
www.kraft-werkzeugmaschinen.de

#4019-91910 · Vertical Turret Lathe - Single Column

KRAFT - KDM-K 40 | KDM-K 50 - - Fabrikneu - oder CNC

Technical details

KDM-K 40 | KDM-K 50 ︱faceplate diameter 3150/3500|4000/4500 mm︱swing diameter 4000|5000 mm︱turning height 2500/3150/4000|2500/3150/ mm︱max. torque on the faceplate 100000 Nm︱max. workpiece weight 32/50/83 t︱table speeds 2 – 40 1/min︱Travel of Ram (vertical) 1300/1600/2000 mm︱Travel of ram (horiz.) 2250 | 2800 mm︱rapid traverse X-axis 3|4 m/min︱cross section of ram 200x255 mm︱rapid feed cross beam 350 mm/min︱power maindrive 55|75 kW︱Weight approx. 58/75/115 |58/75/115 t︱coolant system ︱face plate siehe oben ︱tech. documentation ︱CE-certificate ︱Rams 2 Stk.︱stepless spindle speed ︱

KDM-K 40 | KDM-K 50

faceplate diameter 3150/3500|4000/4500 mm

swing diameter 4000|5000 mm

turning height 2500/3150/4000|2500/3150/ mm

max. torque on the faceplate 100000 Nm

max. workpiece weight 32/50/83 t

table speeds 2 – 40 1/min

Travel of Ram (vertical) 1300/1600/2000 mm

Travel of ram (horiz.) 2250 | 2800 mm

rapid traverse X-axis 3|4 m/min

cross section of ram 200x255 mm

rapid feed cross beam 350 mm/min

power maindrive 55|75 kW

Weight approx. 58/75/115 |58/75/115 t

face plate siehe oben

Rams 2 Stk.

Datasheet

used Lathes Vertical Turret Lathe - Single Column KRAFT KDM-63

Kraft Werkzeugmaschinen GmbH
Wilhelmstraße 20
64589 Stockstadt
Deutschland

+49 (0) 6158/9999975
nr@kraft-werkzeugmaschinen.de
www.kraft-werkzeugmaschinen.de

#4019-91920 · Vertical Turret Lathe - Single Column

KRAFT - KDM-63 - - Fabrikneu - Siemens/Fanuc/Fagor

Technical details

faceplate diameter 4700/5700 mm︱swing diameter 6300 mm︱turning height 3150/4000 mm︱workpiece weight 63/100 t︱table speeds 0.2-32 U/min (2 Stufen) ︱max. torque 400 KNm︱slide stroke vertikal: 1600/2000 mm︱slide stroke horizontal: 3400 mm︱cross section of ram 240x240/280x280 mm︱Cross rail travel 2000 mm︱rapid feed cross beam 300 mm/min︱feed stepless X-Achse: 1-500 mm/min︱main drive 90/110 kW︱weight of the machine ca. 110/170 t︱Machine size (LxWxH) 9000x7000x8000 mm︱control Siemens/Fanuc/Fagor ︱︱︱︱workbench ︱

for more information please check attached pdf file on the right hand side

faceplate diameter 4700/5700 mm

swing diameter 6300 mm

turning height 3150/4000 mm

workpiece weight 63/100 t

table speeds 0.2-32 U/min (2 Stufen)

max. torque 400 KNm

slide stroke vertikal: 1600/2000 mm

slide stroke horizontal: 3400 mm

cross section of ram 240x240/280x280 mm

Cross rail travel 2000 mm

rapid feed cross beam 300 mm/min

feed stepless X-Achse: 1-500 mm/min

main drive 90/110 kW

weight of the machine ca. 110/170 t

Machine size (LxWxH) 9000x7000x8000 mm

control Siemens/Fanuc/Fagor

Description :

for more information please check attached pdf file on the right hand side

Datasheet

used Lathes Vertical Turret Lathe - Single Column KRAFT KDM-K 25 | KDM-K 28 | KDM-K 31

Kraft Werkzeugmaschinen GmbH
Wilhelmstraße 20
64589 Stockstadt
Deutschland

+49 (0) 6158/9999975
nr@kraft-werkzeugmaschinen.de
www.kraft-werkzeugmaschinen.de

#4019-91900 · Vertical Turret Lathe - Single Column

KRAFT - KDM-K 25 | KDM-K 28 | KDM-K 31 - - Fabrikneu - oder CNC

Technical details

KDM-K 25 | KDM-K 28 | KDM ︱faceplate diameter 2250|2830|3150|3500 mm︱swing diameter 2500|2800|3100|3500 mm︱turning height 1600/2000/2500 |2000/2500 mm︱max. torque on the faceplate 63000 Nm︱max. workpiece weight 10/16 t︱table speeds 0,5-80 |0,5-80 |2-63 |2-5 1/min︱Travel of Ram (vertical) 1000/1250|1000/1250|1000/ mm︱Travel of ram (horiz.) 1400|1600|1700|1800 mm︱rapid traverse X-axis 3 m/min︱cross section of ram 200x255 mm︱rapid feed cross beam 350 mm/min︱power maindrive 55 kW︱Weight approx. 32/35/37|35/38/40|36/40/4 t︱coolant system ︱face plate siehe oben ︱tech. documentation ︱CE-certificate ︱Rams 2 Stk.︱stepless spindle speed ︱

KDM-K 25 | KDM-K 28 | KDM

faceplate diameter 2250|2830|3150|3500 mm

swing diameter 2500|2800|3100|3500 mm

turning height 1600/2000/2500 |2000/2500 mm

max. torque on the faceplate 63000 Nm

max. workpiece weight 10/16 t

table speeds 0,5-80 |0,5-80 |2-63 |2-5 1/min

Travel of Ram (vertical) 1000/1250|1000/1250|1000/ mm

Travel of ram (horiz.) 1400|1600|1700|1800 mm

rapid traverse X-axis 3 m/min

cross section of ram 200x255 mm

rapid feed cross beam 350 mm/min

power maindrive 55 kW

Weight approx. 32/35/37|35/38/40|36/40/4 t

face plate siehe oben

Rams 2 Stk.

Datasheet

used Lathes Vertical Turret Lathe - Single Column KRAFT KDM-100

Kraft Werkzeugmaschinen GmbH
Wilhelmstraße 20
64589 Stockstadt
Deutschland

+49 (0) 6158/9999975
nr@kraft-werkzeugmaschinen.de
www.kraft-werkzeugmaschinen.de

#4019-91922 · Vertical Turret Lathe - Single Column

KRAFT - KDM-100 - - Fabrikneu - Siemens/Fanuc/Fagor

Technical details

faceplate diameter 8000 mm︱swing diameter 10000 mm︱turning height 4500 mm︱workpiece weight 120/200 t︱table speeds 0.2-16 U/min (2 Stufen) ︱max. torque on the faceplate 200/460 k.Nm︱slide stroke vertikal: 2300 mm︱slide stroke horizontal: 5300 mm︱cross section of ram 300x300 mm︱Max. cutting force of tool head links: 63 kN / rechts: 80 ︱Cross rail travel 2000 mm︱rapid feed cross beam 300 mm/min︱feed stepless X-Achse: 1-500 mm/min︱main drive 110 kW︱weight of the machine ca. 270 t︱Machine size (LxWxH) 14000x10000x9000 mm︱control Siemens 828D/Siemens 840D ︱︱︱︱

for more information please check attached pdf file on the right hand side

faceplate diameter 8000 mm

swing diameter 10000 mm

turning height 4500 mm

workpiece weight 120/200 t

table speeds 0.2-16 U/min (2 Stufen)

max. torque on the faceplate 200/460 k.Nm

slide stroke vertikal: 2300 mm

slide stroke horizontal: 5300 mm

cross section of ram 300x300 mm

Max. cutting force of tool head links: 63 kN / rechts: 80

Cross rail travel 2000 mm

rapid feed cross beam 300 mm/min

feed stepless X-Achse: 1-500 mm/min

main drive 110 kW

weight of the machine ca. 270 t

Machine size (LxWxH) 14000x10000x9000 mm

control Siemens 828D/Siemens 840D

Description :

for more information please check attached pdf file on the right hand side

Datasheet

used Lathes Vertical Turret Lathe - Single Column KRAFT YS-VL-1000ATC

Kraft Werkzeugmaschinen GmbH
Wilhelmstraße 20
64589 Stockstadt
Deutschland

+49 (0) 6158/9999975
nr@kraft-werkzeugmaschinen.de
www.kraft-werkzeugmaschinen.de

#4019-2611137 · Vertical Turret Lathe - Single Column

KRAFT - YS-VL-1000ATC - - Fabrikneu - Fanuc 0i TD

Technical details

faceplate diameter 1000 mm︱swing diameter 1350 mm︱turning height 1070 mm︱total power requirement 75 kva︱weight of the machine ca. 25 t︱dimensions of the machine ca. 5,3x4,6x5,5 m︱

Standard accessories: Chips Conveyor & Coolant Tank Oil/Water Separator Machine Cover (High guarding) Heat exchanger For Electrical Cabinet Auto Lubrication in Guide way 4 Jaw Manual Chuck 1000mm Hydraulic Unit BT50 Tool Connection in RAM Metal frame and case in machine shipment packing(Wooden packing with metal base) 3 colors Warning Tower Light Chamber light Anti- Dropping in Z axis -- Auto Motor Brake System installed options: Air Conditioner For Electrical Box Coolant Through Spindle Filter Of Coolant Water CE Mark Transformer

faceplate diameter 1000 mm

swing diameter 1350 mm

turning height 1070 mm

total power requirement 75 kva

weight of the machine ca. 25 t

dimensions of the machine ca. 5,3x4,6x5,5 m

Description :

Standard accessories:

Chips Conveyor & Coolant Tank
Oil/Water Separator
Machine Cover (High guarding)
Heat exchanger For Electrical Cabinet
Auto Lubrication in Guide way
4 Jaw Manual Chuck 1000mm
Hydraulic Unit
BT50 Tool Connection in RAM
Metal frame and case in machine shipment packing(Wooden packing with metal base)
3 colors Warning Tower Light
Chamber light
Anti- Dropping in Z axis -- Auto Motor Brake System

installed options:

Air Conditioner For Electrical Box
Coolant Through Spindle
Filter Of Coolant Water
CE Mark
Transformer

Datasheet

used Lathes Vertical Turret Lathe - Single Column KRAFT KDM-K 12| KDM-K 16| KDM-K 20 |

Kraft Werkzeugmaschinen GmbH
Wilhelmstraße 20
64589 Stockstadt
Deutschland

+49 (0) 6158/9999975
nr@kraft-werkzeugmaschinen.de
www.kraft-werkzeugmaschinen.de

#4019-914520 · Vertical Turret Lathe - Single Column

KRAFT - KDM-K 12| KDM-K 16| KDM-K 20 | - - Fabrikneu - oder CNC

Technical details

KDM-K 12| KDM-K 16 | KDM- ︱faceplate diameter 1000|1400|1800|2000|2300 mm︱swing diameter 1200|1600|2000|2300|2600 mm︱turning height 1000|1250|1400|1600|1500 mm︱table speeds 6,3- 200|5-160 | 3.2-100 m/min︱transmission ratio 16 ︱max. workpiece weight 3,2|5|8|8|8 t︱rapid feed of tool post 1800 mm/min︱feed speeds 0,8-86 mm/min in X-Ach︱Travel of Ram (vertical) 650/700|800/1000|800/1000 mm︱Travel of ram (horiz.) 630|915|1115|1250|1500 mm︱max. vertical adjustment of side-support 900|900|980|980 mm︱max. horizontal adjustment of side-support 630|630|500|500 mm︱Cross rail travel 850/1100|890/990/1240/164 mm︱power maindrive 22|30|37|37 kW︱weight of the machine ca. 9|14|18|23|21 t︱Machine size (LxWxH) 2299x2540x3403|2660x26603 mm︱︱tool holder 5 fach︱central lubrication ︱

KDM-K 12| KDM-K 16 | KDM-

faceplate diameter 1000|1400|1800|2000|2300 mm

swing diameter 1200|1600|2000|2300|2600 mm

turning height 1000|1250|1400|1600|1500 mm

table speeds 6,3- 200|5-160 | 3.2-100 m/min

transmission ratio 16

max. workpiece weight 3,2|5|8|8|8 t

rapid feed of tool post 1800 mm/min

feed speeds 0,8-86 mm/min in X-Ach

Travel of Ram (vertical) 650/700|800/1000|800/1000 mm

Travel of ram (horiz.) 630|915|1115|1250|1500 mm

max. vertical adjustment of side. 900|900|980|980 mm

max. horizontal adjustment of si. 630|630|500|500 mm

Cross rail travel 850/1100|890/990/1240/164 mm

power maindrive 22|30|37|37 kW

weight of the machine ca. 9|14|18|23|21 t

Machine size (LxWxH) 2299x2540x3403|2660x26603 mm

tool holder 5 fach

84.900 €

Datasheet

used Lathes Vertical Turret Lathe - Single Column KRAFT KDM-12 | KDM-16 | KDM-20 | KDM

Kraft Werkzeugmaschinen GmbH
Wilhelmstraße 20
64589 Stockstadt
Deutschland

+49 (0) 6158/9999975
nr@kraft-werkzeugmaschinen.de
www.kraft-werkzeugmaschinen.de

#4019-91055 · Vertical Turret Lathe - Single Column

KRAFT - KDM-12 | KDM-16 | KDM-20 | KDM - - Fabrikneu - Siemens/Fanuc/Fagor

Technical details

KDM-12 | KDM-16 | KDM-20 ︱faceplate diameter 1000|1400|1800|2000 mm︱swing diameter 1250|1600|2000|2300 mm︱turning height 1000 (opt. 1400)|1000 (op mm︱table speeds 5 - 200 (2-360 opt.)|5 - 1/min︱transmission ratio 4 (variabel in jeder Stuf ︱max. workpiece weight 4|6|8|10 t︱max. torque on the faceplate 20|25|25|25 KN︱rapid feed of tool post 8000|3000|3000|3000 mm/min︱feed speeds 0.1 - 500 mm/min︱Max. cutting force of tool head 18|25|30|30 KNm︱Travel of Ram (vertical) 600|800 (1000 opt.)|800 ( mm︱Travel of ram (horiz.) 850|1000|1115|1400 mm︱Cross rail travel 600|850/1000 (optional)|8 mm︱power maindrive 22/30|30/37|37/45|37/45 kW︱weight of the machine ca. 9|12,5|18,5|20,5 t︱Machine size (LxWxH) 2360x2277x3403|2660x2660x mm︱cnc control Siemens 828d ︱tool holder ︱4 jaw chuck ︱

KDM-12 | KDM-16 | KDM-20

faceplate diameter 1000|1400|1800|2000 mm

swing diameter 1250|1600|2000|2300 mm

turning height 1000 (opt. 1400)|1000 (op mm

table speeds 5 - 200 (2-360 opt.)|5 - 1/min

transmission ratio 4 (variabel in jeder Stuf

max. workpiece weight 4|6|8|10 t

max. torque on the faceplate 20|25|25|25 KN

rapid feed of tool post 8000|3000|3000|3000 mm/min

feed speeds 0.1 - 500 mm/min

Max. cutting force of tool head 18|25|30|30 KNm

Travel of Ram (vertical) 600|800 (1000 opt.)|800 ( mm

Travel of ram (horiz.) 850|1000|1115|1400 mm

Cross rail travel 600|850/1000 (optional)|8 mm

power maindrive 22/30|30/37|37/45|37/45 kW

weight of the machine ca. 9|12,5|18,5|20,5 t

Machine size (LxWxH) 2360x2277x3403|2660x2660x mm

Datasheet

used Lathes Vertical Turret Lathe - Single Column HANKOOK VTB-250E

JS-Werkzeugmaschinen GmbH
Weserstrasse 228
32545 Bad Oeynhausen
Deutschland

+49 (0) 163 - 6037450
info@js-wzm.de
www.js-wzm.de

#2062-3333 · Vertical Turret Lathe - Single Column

HANKOOK - VTB-250E - - 2021 - Fanuc 32i-B

Technical details

faceplate diameter 2.500 mm︱swing diameter 3.000 mm︱turning height max. 2.000 mm︱Control Fanuc 32i-B︱max. torque at faceplate 55100 Nm︱max. cutting force 5.000 kgf︱max. workpiece weight 15.000 kg︱table diameter 2.500 mm︱table speed 1~150 min/-1︱gear steps Auto 2. -step︱spindle cone ISO 7/24 No. 50 ︱tool size 50 mm︱ram cross section 280 x 280 mm︱X-axis travel (sadle horizontal) 1.700 mm︱Z-axis travel (ram vertical) 1.600 mm︱vertical travel of cross rail 1.000 mm︱X-/Z-axis cutting feedrate max. 10.000 mm/min︱X-/Z-axis rapid traverse 10.000 mm/min︱cross rail rapid traverse 300 mm/min︱type of tool holder MAS BT 50 ︱

TECHNICAL DESCRIPTION Vertical Turret Lathe - Single Column HANKOOK VTB-250E Heavy Duty High Precision Vertical Turning Lathe. - Casting bed with strong ribs, hardend and smoothed box way guide are ensure for high precision and working life.Each guideways for feeding axis is lubricated and attached with Turcite to be reduced wear and friction- resistance. - Tool Changer: 12 slots of tools for a tool weight up to 70 kg - Axis drive system:Big ball screws coupled with digital servo motors and linear scales guarantee high reproducibility and precision in positioning. - Control system: Fanuc 32i-B - Standard accessories: 4 jaws face plate with 2.500mm diameter Automatic Tool Changer Hydraulik unit Central lubrication Coolant tank Telescopic cover Work light Patrol lamp (Red, Yellow, Green) Levelling block Foundation bolt & nut Operation tool box & tool kits CE conformity mark The illustration shows a VTC-250E. However, figures are very similar. VTB has no driven tools and no C-axis.

faceplate diameter 2.500 mm

swing diameter 3.000 mm

turning height max. 2.000 mm

Control Fanuc 32i-B

max. torque at faceplate 55100 Nm

max. cutting force 5.000 kgf

max. workpiece weight 15.000 kg

table diameter 2.500 mm

table speed 1~150 min/-1

gear steps Auto 2. -step

spindle cone ISO 7/24 No. 50

tool size 50 mm

ram cross section 280 x 280 mm

X-axis travel (sadle horizontal) 1.700 mm

Z-axis travel (ram vertical) 1.600 mm

vertical travel of cross rail 1.000 mm

X-/Z-axis cutting feedrate max. 10.000 mm/min

X-/Z-axis rapid traverse 10.000 mm/min

cross rail rapid traverse 300 mm/min

type of tool holder MAS BT 50

Description :

TECHNICAL DESCRIPTION

Vertical Turret Lathe - Single Column

HANKOOK VTB-250E

Heavy Duty High Precision Vertical Turning Lathe.
- Casting bed with strong ribs, hardend and smoothed box way guide are ensure
for high precision and working life.Each guideways for feeding axis is
lubricated and attached with Turcite to be reduced wear and friction-
resistance.
- Tool Changer: 12 slots of tools for a tool weight up
to 70 kg
- Axis drive system:Big ball screws coupled with digital servo motors and
linear scales guarantee high reproducibility and precision in positioning.
- Control system: Fanuc 32i-B
- Standard accessories:
4 jaws face plate with 2.500mm diameter
Automatic Tool Changer
Hydraulik unit
Central lubrication
Coolant tank
Telescopic cover
Work light
Patrol lamp (Red, Yellow, Green)
Levelling block
Foundation bolt & nut
Operation tool box & tool kits

CE conformity mark

The illustration shows a VTC-250E.
However, figures are very similar.
VTB has no driven tools and no C-axis.

Datasheet

used Lathes Vertical Turret Lathe - Single Column HANKOOK VTC-160 E

JS-Werkzeugmaschinen GmbH
Weserstrasse 228
32545 Bad Oeynhausen
Deutschland

+49 (0) 163 - 6037450
info@js-wzm.de
www.js-wzm.de

#2062-2222 · Vertical Turret Lathe - Single Column

HANKOOK - VTC-160 E - - 2021 - Fanuc 0i-T

Technical details

faceplate diameter 1.600 mm︱swing diameter 2.000 mm︱turning height max. 1.400 mm︱Control Fanuc 0i-T︱max. torque at faceplate 23800 Nm︱max. cutting force 3.000 kgf︱max. workpiece weight 10.000 kg︱table diameter 1.600 mm︱table speed 0,7~280 min/-1︱gear steps Auto 2. -step︱min. indx angle 0,001 °︱cutting feedrate 0 ~ 900 °/min︱max. speed 3 min/-1︱spindle cone ISO 7/24 No. 50 ︱tool size 32 x 32 mm︱mill spindel speed (VTC) 30~3.000 min/-1︱max. mill spindle torque (VTC) 235 Nm︱ram cross section 220 x 220 mm︱X-axis travel (sadle horizontal) 1260 mm︱Z-axis travel (ram vertical) 900 mm︱

TECHNICAL DESCRIPTION Vertical Turret Lathe - Single Column HANKOOK VTC-160E Heavy Duty High Precision Vertical Turning Lathe. - Casting bed with strong ribs, hardend and smoothed box way guide are ensure for high precision and working life.Each guideways for feeding axis is lubricated and attached with Turcite to be reduced wear and friction- resistance. - Tool Changer: 24 slots of tools also 12 for driven tools for a tool weight up to 70 kg - Axis drive system:Big ball screws coupled with digital servo motors and linear scales guarantee high reproducibility and precision in positioning. - Control system: Fanuc 0i-T - Standard accessories: 4 jaws face plate with 1.600mm diameter Automatic Tool Changer Hydraulik unit Central lubrication Coolant tank Telescopic cover Work light Patrol lamp (Red, Yellow, Green) Levelling block Foundation bolt & nut Operation tool box & tool kits CE conformity mark

faceplate diameter 1.600 mm

swing diameter 2.000 mm

turning height max. 1.400 mm

Control Fanuc 0i-T

max. torque at faceplate 23800 Nm

max. cutting force 3.000 kgf

max. workpiece weight 10.000 kg

table diameter 1.600 mm

table speed 0,7~280 min/-1

gear steps Auto 2. -step

min. indx angle 0,001 °

cutting feedrate 0 ~ 900 °/min

max. speed 3 min/-1

spindle cone ISO 7/24 No. 50

tool size 32 x 32 mm

mill spindel speed (VTC) 30~3.000 min/-1

max. mill spindle torque (VTC) 235 Nm

ram cross section 220 x 220 mm

X-axis travel (sadle horizontal) 1260 mm

Z-axis travel (ram vertical) 900 mm

Description :

TECHNICAL DESCRIPTION

Vertical Turret Lathe - Single Column

HANKOOK VTC-160E

Heavy Duty High Precision Vertical Turning Lathe.
- Casting bed with strong ribs, hardend and smoothed box way guide are ensure
for high precision and working life.Each guideways for feeding axis is
lubricated and attached with Turcite to be reduced wear and friction-
resistance.
- Tool Changer: 24 slots of tools also 12 for driven tools for a tool weight up
to 70 kg
- Axis drive system:Big ball screws coupled with digital servo motors and
linear scales guarantee high reproducibility and precision in positioning.
- Control system: Fanuc 0i-T
- Standard accessories:
4 jaws face plate with 1.600mm diameter
Automatic Tool Changer
Hydraulik unit
Central lubrication
Coolant tank
Telescopic cover
Work light
Patrol lamp (Red, Yellow, Green)
Levelling block
Foundation bolt & nut
Operation tool box & tool kits

CE conformity mark

Datasheet

TOP Manufacturer:

WMW NILES - RAVENSBURG - HEYLIGENSTAEDT - NN - WMW ZERBST - JMTCL - TADU - WEVERK KARLSTADT -