European network of stockholding machinery dealers

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:

          Lathes

          Machinelist: Lathes


          Center Lathe

          used Lathes Center Lathe 5VDF BOEHRINGER unbekannt


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-S3522 · Center Lathe

          5VDF BOEHRINGER - unbekannt - - unbekannt -

          Technical details
          turning diameter over bed 500-600 mm︱turning diameter over slide rest / mm︱turning length 2800 mm︱bore diameter 130 mm︱total power requirement / kW︱weight of the machine ca. 5,25 t︱required space / m︱
            turning diameter over bed 500-600 mm
            turning diameter over slide rest / mm
            turning length 2800 mm
            bore diameter 130 mm
            total power requirement / kW
            weight of the machine ca. 5,25 t
            required space / m


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Center Lathe GURUTZPE Super AT 400


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-S52001 · Center Lathe

          GURUTZPE - Super AT 400 - - unbekannt -

          Technical details
          turning length 2700 mm︱turning diameter 800 mm︱centre height 595 mm︱turning speeds 12 - 630 U/min︱weight 7600 kg︱faceplate 1190 mm︱required space 5,66 x 1,16 x 1,46 m︱
            turning length 2700 mm
            turning diameter 800 mm
            centre height 595 mm
            turning speeds 12 - 630 U/min
            weight 7600 kg
            faceplate 1190 mm
            required space 5,66 x 1,16 x 1,46 m
            Description :



        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Center Lathe VDF unbekannt


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-S3521 · Center Lathe

          VDF - unbekannt - - unbekannt -

          Technical details
          turning diameter over bed 300 mm︱turning diameter over slide rest / mm︱turning length 2600 mm︱bore diameter 60 mm︱total power requirement / kW︱weight of the machine ca. 2,55 t︱
            turning diameter over bed 300 mm
            turning diameter over slide rest / mm
            turning length 2600 mm
            bore diameter 60 mm
            total power requirement / kW
            weight of the machine ca. 2,55 t
            Description :



        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Center Lathe VDF-BOEHRINGER 640 x 4000mm


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-AA1009 · Center Lathe

          VDF-BOEHRINGER - 640 x 4000mm - - unbekannt -

          Technical details
          turning diameter over bed 640 mm︱turning length ca. 4300 mm︱centre height 320 mm︱total power requirement 12 kW︱spindle passage 80 mm︱required space 6,5 x 1,55 x 1,5 m︱
            turning diameter over bed 640 mm
            turning length ca. 4300 mm
            centre height 320 mm
            total power requirement 12 kW
            spindle passage 80 mm
            required space 6,5 x 1,55 x 1,5 m


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Center Lathe VDF-HEIDENREICH & HARBECK V3


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-S3717 · Center Lathe

          VDF-HEIDENREICH & HARBECK - V3 - - unbekannt -

          Technical details
          Height of centres 255 mm︱turning diameter over bed 520 mm︱turning diameter over slide rest 300 mm︱turning length 1500 mm︱bed width 400 mm︱spindle bore 62 mm︱total power requirement 7,5 kW︱turning speeds 1400 U/min︱faceplate diameter 500 mm︱weight of the machine ca. ca. 2,85 t︱required space 3,8 x 1,4 m︱
            Height of centres 255 mm
            turning diameter over bed 520 mm
            turning diameter over slide rest 300 mm
            turning length 1500 mm
            bed width 400 mm
            spindle bore 62 mm
            total power requirement 7,5 kW
            turning speeds 1400 U/min
            faceplate diameter 500 mm
            weight of the machine ca. ca. 2,85 t
            required space 3,8 x 1,4 m


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Center Lathe CAZENEUVE HB 575


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-S5266 · Center Lathe

          CAZENEUVE - HB 575 - - unbekannt -

          Technical details
          turning diameter over bed 500 mm︱turning diameter over slide rest 280 mm︱turning length 1000 mm︱centre height 250 mm︱turning speeds 2500 U/min︱total power requirement 9 kW︱weight of the machine ca. 1,9 t︱required space 2,5 x 1,25 x 1,6 m︱
            turning diameter over bed 500 mm
            turning diameter over slide rest 280 mm
            turning length 1000 mm
            centre height 250 mm
            turning speeds 2500 U/min
            total power requirement 9 kW
            weight of the machine ca. 1,9 t
            required space 2,5 x 1,25 x 1,6 m


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Center Lathe OERLIKON-BOEHRINGER DUE 500


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-AA1001 · Center Lathe

          OERLIKON-BOEHRINGER - DUE 500 - - 1982 -

          Technical details
          turning diameter over bed 500 mm︱turning length 1500 mm︱centre height 250 mm︱spindle passage 70 mm︱swing diameter over face slide 285 mm︱turning speeds 11,2 - 2240 U/min︱
            turning diameter over bed 500 mm
            turning length 1500 mm
            centre height 250 mm
            spindle passage 70 mm
            swing diameter over face slide 285 mm
            turning speeds 11,2 - 2240 U/min
            Description :



        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Center Lathe TOS SUS63x1250


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-S3727 · Center Lathe

          TOS - SUS63x1250 - - 1980 -

          Technical details
          turning diameter over bed 655 mm︱turning diameter over slide rest 390 mm︱turning length 1250 mm︱spindle bore 82 mm︱spindle turning speed range 9-1120 U/min︱feeds 0,049-3 mm/U︱total power requirement 12 kW︱weight of the machine ca. 5,2 t︱required space 3,5 x 1,9 x 1,7 m m︱
            turning diameter over bed 655 mm
            turning diameter over slide rest 390 mm
            turning length 1250 mm
            spindle bore 82 mm
            spindle turning speed range 9-1120 U/min
            feeds 0,049-3 mm/U
            total power requirement 12 kW
            weight of the machine ca. 5,2 t
            required space 3,5 x 1,9 x 1,7 m m
            Description :



        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Center Lathe RAMO T45-10


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-S3805 · Center Lathe

          RAMO - T45-10 - - 1968 -

          Technical details
          turning diameter over bed 450 mm︱turning length 1000 mm︱turning diameter over slide 232 mm︱engine output 10 PS︱turning speeds 31 - 1600 U/min︱weight of the machine ca. 1,7 t︱required space 2,50 x 1,30 x 1,60 m︱
            turning diameter over bed 450 mm
            turning length 1000 mm
            turning diameter over slide 232 mm
            engine output 10 PS
            turning speeds 31 - 1600 U/min
            weight of the machine ca. 1,7 t
            required space 2,50 x 1,30 x 1,60 m


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Center Lathe EMAG RS1 - E


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-S3802 · Center Lathe

          EMAG - RS1 - E - - 1961 -

          Technical details
          centre height 235 mm︱turning diameter 470 mm︱turning speeds 2700 U/min︱turning length 1500 mm︱
          inkl. Zubehör (siehe Bilder)
            centre height 235 mm
            turning diameter 470 mm
            turning speeds 2700 U/min
            turning length 1500 mm
            Description :
            inkl. Zubehör (siehe Bilder)


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Center Lathe TOS SN55


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-H1148 · Center Lathe

          TOS - SN55 - - 1960 -

          Technical details
          turning diameter over bed 590 mm︱centre distance 4000 mm︱turning diameter over slide rest / mm︱total power requirement / kW︱weight of the machine ca. / t︱required space / m︱
            turning diameter over bed 590 mm
            centre distance 4000 mm
            turning diameter over slide rest / mm
            total power requirement / kW
            weight of the machine ca. / t
            required space / m


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact

          CNC Lathe

          used Lathes CNC Lathe WALDRICH-SIEGEN 4000 x 1500


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-RA1201 · CNC Lathe

          WALDRICH-SIEGEN - 4000 x 1500 - - unbekannt - Siemens R&D

          Technical details
          turning diameter / mm︱turning length / mm︱control Siemens R&D ︱total power requirement / kW︱weight of the machine ca. / t︱required space / m︱
            turning diameter / mm
            turning length / mm
            control Siemens R&D
            total power requirement / kW
            weight of the machine ca. / t
            required space / m


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Lathe VOEST-ALPINE STEINEL M70 x 3000


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-S3820 · CNC Lathe

          VOEST-ALPINE STEINEL - M70 x 3000 - - 1998 - SINUMERIK 840C

          Technical details
          turning diameter / mm︱turning length / mm︱control SINUMERIK 840C ︱greates pass round over bed 750 mm︱swing diameter over bed slide 670 mm︱
          VOEST-ALPINE STEINEL CNC lathe M70 x 3000 with boring bar changer Technical data/technical data: Swing diameter over bed: 750mm Swing diameter over slide: 670mm Max. flight circle turning tools: 730mm Double cross slide top 6 axes Sleigh path lengthwise / Z1: 3670mm Left carriage / X: 660 mm Right carriage / E: 660 mm Cross slide bottom 2 axes Sleigh path lengthways: 2450mm Sledge path plan: 250mm Center width/distance :3000mm Spindle/spindle: Max. speed: 3150 min-1 Spindle diameter v. Bearing: 160mm Bore diameter Spindle: 106mm Spindle head: DIN 55026 A 11 Main drive Total drive power: 63 kW Max. torque spindle: 2385 Nm Speed ??range: 10 -3150 1/min Feed force: 30000 N longitudinal/; 31500 N plan Web feed: 5000 mm/min Speed: 10000mm/min Dimensions: Length: 4665mm (machine bed) 7575mm with chip conveyor Width: 4315mm Height: 3500mm Total weight approx.: 28000kg General: Height of the turning spindle above the floor: 1233mm Height of the turning spindle above the lower edge of the machine: 1165mm Noise without processing and feed: dB(A) 80 Furnishing: -Disc turret 9+1 switching positions -Flat table turret 3+1 switching positions -Milling and drilling equipment drum mag. for drilling and milling tools (ATC) -VDI recordings/attach. VDI 3425 -4-fold revolver with quill - Full clamping cylinder OKRJ 200 from FORKARDT - Three-jaw chuck KNCS 400 92 3A11, SMW - Bezel SLU-A5-ZS-100 V, SMW company - Chip conveyor discharge height 1133 mm, width 450 mm
            turning diameter / mm
            turning length / mm
            control SINUMERIK 840C
            greates pass round over bed 750 mm
            swing diameter over bed slide 670 mm
            Description :
            VOEST-ALPINE STEINEL CNC lathe M70 x 3000 with boring bar changer

            Technical data/technical data:


            Swing diameter over bed: 750mm
            Swing diameter over slide: 670mm
            Max. flight circle turning tools: 730mm

            Double cross slide top 6 axes

            Sleigh path lengthwise / Z1: 3670mm
            Left carriage / X: 660 mm
            Right carriage / E: 660 mm

            Cross slide bottom 2 axes

            Sleigh path lengthways: 2450mm
            Sledge path plan: 250mm
            Center width/distance :3000mm

            Spindle/spindle:
            Max. speed: 3150 min-1
            Spindle diameter v. Bearing: 160mm
            Bore diameter Spindle: 106mm
            Spindle head: DIN 55026 A 11

            Main drive
            Total drive power: 63 kW
            Max. torque spindle: 2385 Nm

            Speed ??range: 10 -3150 1/min
            Feed force: 30000 N longitudinal/; 31500 N plan

            Web feed: 5000 mm/min
            Speed: 10000mm/min


            Dimensions:
            Length: 4665mm (machine bed) 7575mm with chip conveyor
            Width: 4315mm
            Height: 3500mm

            Total weight approx.:
            28000kg


            General:
            Height of the turning spindle above the floor: 1233mm
            Height of the turning spindle above the lower edge of the machine: 1165mm
            Noise without processing and feed: dB(A) 80


            Furnishing:
            -Disc turret 9+1 switching positions
            -Flat table turret 3+1 switching positions
            -Milling and drilling equipment
            drum mag. for drilling and milling tools (ATC)
            -VDI recordings/attach. VDI 3425
            -4-fold revolver with quill
            - Full clamping cylinder OKRJ 200 from FORKARDT
            - Three-jaw chuck KNCS 400 92 3A11, SMW
            - Bezel SLU-A5-ZS-100 V, SMW company
            - Chip conveyor discharge height 1133 mm, width 450 mm


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact

          Facing Lathe

          used Lathes Facing Lathe HEYLIGENSTAEDT 6P


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-S1897 · Facing Lathe

          HEYLIGENSTAEDT - 6P - - 1953 -

          Technical details
          turning length / mm︱turning diameter over plate // mm︱faceplate diameter / mm︱
          Faceplate diameter: 3500mm Center height over plate: 1320mm Turning diameter over plate: 2600mm Turning diameter in the pit: 3600mm Turning diameter over bed: 1300mm Turning length: about 2400mm Max. workpiece weight: 22000kg Max. torque on the faceplate: 5000 mkg Faceplate ring gear pitch circle diameter: 1900mm Main spindle bore: 120mm range of speeds normal: 0.71-35.5 rpm increased: 1-50 rpm increased: 1.4-71 rpm Drive power: 38kW
            turning length / mm
            turning diameter over plate // mm
            faceplate diameter / mm
            Description :
            Faceplate diameter: 3500mm
            Center height over plate: 1320mm
            Turning diameter over plate: 2600mm
            Turning diameter in the pit: 3600mm
            Turning diameter over bed: 1300mm
            Turning length: about 2400mm
            Max. workpiece weight: 22000kg
            Max. torque on the faceplate: 5000 mkg
            Faceplate ring gear pitch circle diameter: 1900mm
            Main spindle bore: 120mm
            range of speeds
            normal: 0.71-35.5 rpm
            increased: 1-50 rpm
            increased: 1.4-71 rpm
            Drive power: 38kW


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact

          Heavy Duty Lathe

          used Lathes Heavy Duty Lathe WEISSER-HEILBRONN Gigant - CNC


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-S5275 · Heavy Duty Lathe

          WEISSER-HEILBRONN - Gigant - CNC - - 1982 - Siemens Sinumerik 840D

          Technical details
          turning length 2000 mm︱turning diameter 1200 mm︱centre height 600 mm︱control Siemens Sinumerik 840D
            turning length 2000 mm
            turning diameter 1200 mm
            centre height 600 mm
            control Siemens Sinumerik 840D
            Description :



        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Heavy Duty Lathe MFD


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-S5404 · Heavy Duty Lathe

          MFD - - - 1972 - SIEMENS

          Technical details
          turning diameter over bed 2235 mm︱turning diameter over slide rest 2997 mm︱turning length 12200 mm︱Control SIEMENS ︱faceplate diameter 2000 mm︱total power requirement 300 hp︱weight of the machine ca. / t︱
          HOESCH MFD CNC HEAVY DUTY LATHE WITH SIEMENS CONTROL Coming soon to Ennepetal Technical Specifications Faceplate 2006mm Centre Height 1,499mm Swing Over Saddle 2235mm Swing Over Bed 2997mm Turning Length 12192mm Min/Max Workpiece Held In Chuck Ø457/1600mm Maximum Workpiece Weight 110 Ton Speed Range 0.5- 140rpm (300hp Motor) Feed Range 0.0118-7.08''/Rev. Steady Capacity Ø356-902mm Copying Depth 508mm lnductive Maximum Cutting Force 30,000Nm Twin Barrel Steady Capacity Ø356- 902mm, 50 Ton Capacity, Roller Type.
            turning diameter over bed 2235 mm
            turning diameter over slide rest 2997 mm
            turning length 12200 mm
            Control SIEMENS
            faceplate diameter 2000 mm
            total power requirement 300 hp
            weight of the machine ca. / t
            Description :
            HOESCH MFD CNC HEAVY DUTY LATHE WITH SIEMENS CONTROL

            Coming soon to Ennepetal


            Technical Specifications

            Faceplate 2006mm

            Centre Height 1,499mm

            Swing Over Saddle 2235mm

            Swing Over Bed 2997mm

            Turning Length 12192mm

            Min/Max Workpiece Held In Chuck Ø457/1600mm

            Maximum Workpiece Weight 110 Ton

            Speed Range 0.5- 140rpm (300hp Motor)

            Feed Range 0.0118-7.08''/Rev.

            Steady Capacity Ø356-902mm

            Copying Depth 508mm lnductive

            Maximum Cutting Force 30,000Nm

            Twin Barrel Steady Capacity Ø356- 902mm, 50 Ton Capacity, Roller Type.


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Heavy Duty Lathe WALDRICH-SIEGEN CNC-Drehmaschine 22000 mm


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-T514 · Heavy Duty Lathe

          WALDRICH-SIEGEN - CNC-Drehmaschine 22000 mm - - - SIEMENS SINUMERIK 840 D

          Technical details
          turning diameter over bed 2000 mm︱turning diameter over slide rest 1600 mm︱turning length 22.000 mm︱turning diameter 2000 mm︱turning length 20.500 mm︱control SIEMENS SINUMERIK 840 D ︱workpiece weight 70.000 KG︱total power requirement Hauptmotor 110 kW︱
            turning diameter over bed 2000 mm
            turning diameter over slide rest 1600 mm
            turning length 22.000 mm
            turning diameter 2000 mm
            turning length 20.500 mm
            control SIEMENS SINUMERIK 840 D
            workpiece weight 70.000 KG
            total power requirement Hauptmotor 110 kW
            Description :




        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact

          Lathe - cycle-controlled

          used Lathes Lathe -  cycle-controlled PINACHO SM/200


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-H1116 · Lathe - cycle-controlled

          PINACHO - SM/200 - - 2001 - Fanuc

          Technical details
          turning diameter 420 mm︱turning length 1200 mm︱control Fanuc ︱bore diameter 60 mm︱
            turning diameter 420 mm
            turning length 1200 mm
            control Fanuc
            bore diameter 60 mm
            Description :



        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact

          Vertical Turret Lathe - Double Column

          used Lathes Vertical Turret Lathe - Double Column RAFAMET KCF 320 / 350


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-AS2025 · Vertical Turret Lathe - Double Column

          RAFAMET - KCF 320 / 350 - - 2000 - Typ 840 D sl

          Technical details
          faceplate diameter 3200 mm︱swing diameter 3500 mm︱turning height 2200 mm︱range L-W-H 7730 x 6240 x 6700 mm︱control Typ 840 D sl ︱voltage 3 x 400 V︱frequency 50 Hz︱turning speeds 0,8 - 40 U/min︱max. turning diameter 3500 mm︱total power requirement 51 kW︱weight of the machine ca. 86 t︱
          Technical specifications Machine type: CNC vertical lathe Manufacturer: Rafamet Year of manufacture: 1973 conventional General overhaul with control retrofit 2010 Control upgrade 2016 Control: Siemens 840 D Sl Condition: very good faceplate Turning diameter of the faceplate 3,200 mm Number of rotation stages of the face plate 3 (infinitely variable) Speed ??ranges of the faceplate 0.8 - 40 rpm Level I 0.8 – 3 rpm Level II 0.8 - 11 rpm Level III 0.8 – 40 rpm processing of workpieces Max. turning diameter 3,500 mm Max. turning height of the workpieces above the faceplate 2,200 mm vertical supports Smallest axis distance between the vertical supports 470 mm Largest ram travel of the left vertical support 985 mm Largest ram travel of the right vertical support 985 mm Axis Feeds - Infinitely variable feed Max.: X1.2 3m/min max.: z1.2 2.5 m/min Plunger cannot be pivoted Support — crossbar Rapid feed of the cross beam 600 mm/min Larger distance of the cross beam to the faceplate 2,300 mm load sizes +Permissible turning force when turning workpieces with a turning diameter of 2,000 mm and a turning speed of 20 m/min. 8,000kg +Largest chip cross-section for workpieces made of steel Fz = 50 kg/mm² at a turning speed of 20 m/min for all supports 45 mm² +Largest chip cross-section for workpieces made of steel Fz = 50 kg/mm² at a rotation speed of 20 m/min for a vertical support with max. plunger length 985 mm 2.5 mm² +Largest chip cross-section for cast iron workpieces HB = 160 kg/mm² at a turning speed of 20 m/min for all supports 120 mm² +Largest chip cross-section for cast iron workpieces HB = 160 kg/mm² at a rotation speed of 20 m/min for a vertical support with max. plunger length 985 mm 22.5 mm² +Largest permitted workpiece weight at 0.8 - 3.15 rpm 17,500 kg +Largest permitted workpiece weight at 4 - 40 rpm 7,500 kg electric motors Main drive motor power and revolutions 51 kW Power of the feed motors of: - Vertical support beam (2 pieces) 16 Nm (gear 1:10) - Tappet (2 pieces) 16 Nm (gear 1:12) Power and revolutions of the drive motor of the hydraulic pumps (2 pieces) 3kW - 1,500 rpm Power and revolutions of the clamp hydraulic motor of the vertical support beam 1.5 kW - 1,500 rpm Power and rotation for crossbar adjustment 15 kW - 1500 rpm 3.5 Information on the compressed air supply and other consumables Compressed air connection: 6 bar free of oil and water 3.6 Energy Consumption Conditions Voltage: 3 x 400V Control Voltage: 24V Frequency: 50Hz Fusing: 315 A Main dimensions and weight of the machine Length 7,730mm Width 6,240mm Height: 6,700mm Weight: 85,750 kg Tool: Capto 60 recording Not powered front panel Turning diameter of the front plate 3,200 mm Clamping disc diameter 3,400 mm Number of rotation levels of the front panel 3 (continuously adjustable) Front panel speed ranges 0.8 - 40 rpm Level I 0.8 - 3 rpm Level II 0.8 - 11 rpm Level III 0.8 - 40 rpm processing of workpieces Max. turning diameter 3,500 mm Max. turning height of the workpieces above the front panel 2,200 mm Vertical supports Smallest center distance between the vertical supports 470 mm Largest glide path of the left vertical support 985 mm Maximum glide path of the right vertical support 985 mm Axis feed - stepless feed max.: X1.2 3m/min max.: z1.2 2.5 m / min Support - mirror Fast feeding of the crossbeam 600 mm/min Greater distance between the crossbar and the front panel 2,300 mm loading sizes • Permissible torque when turning workpieces with a Turning diameter of 2,000 mm and turning speed from 20 m / min. 8,000 kg • Largest chip cross-section for workpieces made of steel Fz = 50 kg / mm2 at a speed of 20 m / min for all supports 45 mm2 • Largest chip cross-section for workpieces made of steel Fz = 50 kg / mm2 at a speed of 20 m / min for a vertical support at max. piston length 985 mm 2.5 mm2 • Largest chip cross section for workpieces made of cast iron HB = 160 kg / mm2 at a speed of 20 m / min for all supports 120 mm2 • Largest chip cross section for workpieces made of cast iron HB = 160 kg / mm2 at a speed of 20 m / min for a vertical support with max. piston length 985 mm 22.5 mm2 • Largest permissible workpiece weight at 0.8 - 3.15 rpm 17,500 kg • Largest permissible workpiece weight at 4 - 40 rpm 7,500 kg electric motors Main drive motor power and revolutions 51 kW Power of the feed motors of: - Vertical support rod (2 pieces) 16 Nm (gear 1:10) - Tappet (2 pieces) 16 Nm (gear 1:12) Power and revolutions of the drive motor of hydraulic pumps (2 pieces) 3 kW - 1,500 rpm Power and revolutions of the clamp hydraulic motor of the vertical support rod 1.5 kW - 1,500 rpm Power and rotation to adjust the crossbar 15 kW - 1500 rpm Information on compressed air supply and other consumables Compressed air connection: 6 bar free of oil and water Energy consumption, conditions Voltage: 3 x 400V Control Voltage: 24V Frequency: 50Hz Protection: 315 A noise and waste emissions Noise level under load 80.4 dB (A) Sinumerik control: Type 840 D sl Main dimensions and weight of the machine Length 7,730mm Width 6,240mm Height: 6,700mm Weight: 85,750 kg Weight clamp disc: 7,500 kg
            faceplate diameter 3200 mm
            swing diameter 3500 mm
            turning height 2200 mm
            range L-W-H 7730 x 6240 x 6700 mm
            control Typ 840 D sl
            voltage 3 x 400 V
            frequency 50 Hz
            turning speeds 0,8 - 40 U/min
            max. turning diameter 3500 mm
            total power requirement 51 kW
            weight of the machine ca. 86 t
            Description :
            Technical specifications
            Machine type: CNC vertical lathe
            Manufacturer: Rafamet
            Year of manufacture: 1973 conventional
            General overhaul with control retrofit 2010
            Control upgrade 2016
            Control: Siemens 840 D Sl
            Condition: very good

            faceplate
            Turning diameter of the faceplate 3,200 mm
            Number of rotation stages of the face plate 3 (infinitely variable)
            Speed ??ranges of the faceplate 0.8 - 40 rpm
            Level I 0.8 – 3 rpm
            Level II 0.8 - 11 rpm
            Level III 0.8 – 40 rpm

            processing of workpieces
            Max. turning diameter 3,500 mm
            Max. turning height of the workpieces above the faceplate 2,200 mm

            vertical supports
            Smallest axis distance between the vertical supports 470 mm
            Largest ram travel of the left vertical support 985 mm
            Largest ram travel of the right vertical support 985 mm
            Axis Feeds - Infinitely variable feed
            Max.: X1.2 3m/min
            max.: z1.2 2.5 m/min
            Plunger cannot be pivoted

            Support — crossbar
            Rapid feed of the cross beam 600 mm/min
            Larger distance of the cross beam to the faceplate 2,300 mm

            load sizes
            +Permissible turning force when turning workpieces with a
            turning diameter of 2,000 mm and a turning speed
            of 20 m/min. 8,000kg

            +Largest chip cross-section for workpieces made of steel Fz = 50 kg/mm²
            at a turning speed of 20 m/min for all supports 45 mm²

            +Largest chip cross-section for workpieces made of steel Fz = 50 kg/mm²
            at a rotation speed of 20 m/min for a vertical support
            with max. plunger length 985 mm 2.5 mm²

            +Largest chip cross-section for cast iron workpieces HB = 160 kg/mm²
            at a turning speed of 20 m/min for all supports 120 mm²

            +Largest chip cross-section for cast iron workpieces HB = 160 kg/mm²
            at a rotation speed of 20 m/min for a vertical support
            with max. plunger length 985 mm 22.5 mm²

            +Largest permitted workpiece weight at 0.8 - 3.15 rpm 17,500 kg

            +Largest permitted workpiece weight at 4 - 40 rpm 7,500 kg


            electric motors
            Main drive motor power and revolutions 51 kW
            Power of the feed motors of:
            - Vertical support beam (2 pieces) 16 Nm (gear 1:10)
            - Tappet (2 pieces) 16 Nm (gear 1:12)
            Power and revolutions of the drive motor
            of the hydraulic pumps (2 pieces) 3kW - 1,500 rpm
            Power and revolutions of the clamp hydraulic motor
            of the vertical support beam 1.5 kW - 1,500 rpm
            Power and rotation for crossbar adjustment 15 kW - 1500 rpm

            3.5 Information on the compressed air supply and other consumables
            Compressed air connection: 6 bar free of oil and water

            3.6 Energy Consumption Conditions
            Voltage: 3 x 400V
            Control Voltage: 24V
            Frequency: 50Hz
            Fusing: 315 A
            Main dimensions and weight of the machine
            Length 7,730mm
            Width 6,240mm
            Height: 6,700mm
            Weight: 85,750 kg







            Tool:
            Capto 60 recording
            Not powered



            front panel

            Turning diameter of the front plate 3,200 mm

            Clamping disc diameter 3,400 mm

            Number of rotation levels of the front panel 3 (continuously adjustable)

            Front panel speed ranges 0.8 - 40 rpm

            Level I 0.8 - 3 rpm

            Level II 0.8 - 11 rpm

            Level III 0.8 - 40 rpm



            processing of workpieces

            Max. turning diameter 3,500 mm

            Max. turning height of the workpieces above the front panel 2,200 mm


            Vertical supports

            Smallest center distance between the vertical supports 470 mm

            Largest glide path of the left vertical support 985 mm

            Maximum glide path of the right vertical support 985 mm

            Axis feed - stepless feed

            max.: X1.2 3m/min

            max.: z1.2 2.5 m / min



            Support - mirror

            Fast feeding of the crossbeam 600 mm/min

            Greater distance between the crossbar and the front panel 2,300 mm



            loading sizes

            • Permissible torque when turning workpieces with a

            Turning diameter of 2,000 mm and turning speed

            from 20 m / min. 8,000 kg

            • Largest chip cross-section for workpieces made of steel Fz = 50 kg / mm2

            at a speed of 20 m / min for all supports 45 mm2

            • Largest chip cross-section for workpieces made of steel Fz = 50 kg / mm2

            at a speed of 20 m / min for a vertical support

            at max. piston length 985 mm 2.5 mm2

            • Largest chip cross section for workpieces made of cast iron HB = 160 kg / mm2

            at a speed of 20 m / min for all supports 120 mm2

            • Largest chip cross section for workpieces made of cast iron HB = 160 kg / mm2

            at a speed of 20 m / min for a vertical support

            with max. piston length 985 mm 22.5 mm2

            • Largest permissible workpiece weight at 0.8 - 3.15 rpm 17,500 kg

            • Largest permissible workpiece weight at 4 - 40 rpm 7,500 kg



            electric motors

            Main drive motor power and revolutions 51 kW

            Power of the feed motors of:

            - Vertical support rod (2 pieces) 16 Nm (gear 1:10)

            - Tappet (2 pieces) 16 Nm (gear 1:12)

            Power and revolutions of the drive motor

            of hydraulic pumps (2 pieces) 3 kW - 1,500 rpm

            Power and revolutions of the clamp hydraulic motor

            of the vertical support rod 1.5 kW - 1,500 rpm

            Power and rotation to adjust the crossbar 15 kW - 1500 rpm



            Information on compressed air supply and other consumables

            Compressed air connection: 6 bar free of oil and water



            Energy consumption, conditions

            Voltage: 3 x 400V

            Control Voltage: 24V

            Frequency: 50Hz

            Protection: 315 A



            noise and waste emissions

            Noise level under load 80.4 dB (A)




            Sinumerik control: Type 840 D sl

            Main dimensions and weight of the machine

            Length 7,730mm

            Width 6,240mm

            Height: 6,700mm

            Weight: 85,750 kg

            Weight clamp disc: 7,500 kg




        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact

          Vertical Turret Lathe - Single Column

          used Lathes Vertical Turret Lathe - Single Column BERTHIEZ BM 225


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-S55000 · Vertical Turret Lathe - Single Column

          BERTHIEZ - BM 225 - - unbekannt -

          Technical details
          faceplate diameter 2250 mm︱swing diameter 4500 mm︱turning height 2000 mm︱turning diameter 3150 mm︱workpiece weight max. 25000 kg︱total power requirement 55 kW︱weight of the machine ca. ca. 32 t︱required space / m︱
            faceplate diameter 2250 mm
            swing diameter 4500 mm
            turning height 2000 mm
            turning diameter 3150 mm
            workpiece weight max. 25000 kg
            total power requirement 55 kW
            weight of the machine ca. ca. 32 t
            required space / m


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turret Lathe - Single Column JUNGENTHAL unbekannt


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-S3517 · Vertical Turret Lathe - Single Column

          JUNGENTHAL - unbekannt - - unbekannt -

          Technical details
          faceplate diameter 1600 mm︱swing diameter ca. 1800 mm︱turning height ca. 1500 mm︱total power requirement 37 kW︱
            faceplate diameter 1600 mm
            swing diameter ca. 1800 mm
            turning height ca. 1500 mm
            total power requirement 37 kW
            Description :



        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turret Lathe - Single Column SCHIESS-FRORIEP 40Dv - CNC


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-43516 · Vertical Turret Lathe - Single Column

          SCHIESS-FRORIEP - 40Dv - CNC - - 1980 - Siemens 840 C

          Technical details
          faceplate diameter 3500 mm︱workpiece height 3000 mm︱ 160 mm︱ 1998 ︱Control Siemens 840 C ︱max. table load 60000 kg︱electr. connected load 400 V︱Serial number 11 33 0051 ︱total power requirement 71 kW︱weight of the machine ca. / t︱required space 13 x 6 m︱
          The SCHIESS-FRORIEP 40 DV is a vertical lathe built in 1980. The machine was modernized and improved in 1998. Among other things, a driven tool system (C-axis) was installed. In addition, the control system was modernized to SIEMENS 840 C. The large open-sided vertical boring mills with travelling column - type DV - are particularly suited to situations where likely workpieces frequently change in diameter but where maximum workpiece dimensions are rare. Decisions in favour of this type of machine are generally due to minimum floor space requirement, universal adaptability and economical advantages. The modern design of these machines is characterized by rigid all-steel construction optimized by computer - SCHIESS can claim to have done much valuable pioneering work in this area of heavy-duty machine tool building.
            faceplate diameter 3500 mm
            workpiece height 3000 mm
            160 mm
            1998
            Control Siemens 840 C
            max. table load 60000 kg
            electr. connected load 400 V
            Serial number 11 33 0051
            total power requirement 71 kW
            weight of the machine ca. / t
            required space 13 x 6 m
            Description :
            The SCHIESS-FRORIEP 40 DV is a vertical lathe built in 1980.

            The machine was modernized and improved in 1998.

            Among other things, a driven tool system (C-axis) was installed.

            In addition, the control system was modernized to SIEMENS 840 C.


            The large open-sided vertical boring mills with travelling column - type DV -
            are particularly suited to situations where likely workpieces frequently change
            in diameter but where maximum workpiece dimensions are rare.

            Decisions in favour of this type of machine are generally due to minimum floor
            space requirement, universal adaptability and economical advantages.

            The modern design of these machines is characterized by rigid all-steel
            construction optimized by computer - SCHIESS can claim to have done much
            valuable pioneering work in this area of heavy-duty machine tool building.


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turret Lathe - Single Column SCHIESS 14 DKE 100


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-S3516 · Vertical Turret Lathe - Single Column

          SCHIESS - 14 DKE 100 - - 1971 -

          Technical details
          faceplate diameter 1000 mm︱swing diameter 1400 mm︱turning height 1000 mm︱turning speeds 4-16-20-80-315 U/min︱total power requirement 55 kW︱
          Machine no.: 379066 With copy facility Base, faceplate and main drive Faceplate diameter: 1000mm Distance from the floor to the top edge of the faceplate: 900mm Permissible faceplate load: 8000kg stands and crossbeams Vertical adjustment of the crossbar: 800mm Adjustment of the transom per minute: 450mm crossbar support Largest outside diameter: 1150mm Largest turning height: 1150mm Largest turning height with a workpiece diameter of up to 800m: 1750mm Largest distance between faceplate and square turret head: 1375mm Largest vertical adjustment of the turret slide: 700mm Dimension of square turret head: 400x400mm Smallest immersion diameter for the turret head: 580mm feed box Number of feeds: 24 Increment: 1.25
            faceplate diameter 1000 mm
            swing diameter 1400 mm
            turning height 1000 mm
            turning speeds 4-16-20-80-315 U/min
            total power requirement 55 kW
            Description :
            Machine no.: 379066

            With copy facility

            Base, faceplate and main drive
            Faceplate diameter: 1000mm
            Distance from the floor to the top edge of the faceplate: 900mm
            Permissible faceplate load: 8000kg

            stands and crossbeams
            Vertical adjustment of the crossbar: 800mm
            Adjustment of the transom per minute: 450mm

            crossbar support
            Largest outside diameter: 1150mm
            Largest turning height: 1150mm
            Largest turning height with a workpiece diameter of up to 800m: 1750mm
            Largest distance between faceplate and square turret head: 1375mm
            Largest vertical adjustment of the turret slide: 700mm

            Dimension of square turret head: 400x400mm
            Smallest immersion diameter for the turret head: 580mm

            feed box
            Number of feeds: 24
            Increment: 1.25


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          Find the best used lathes and more at LagerMaschinen
          Lathes offer versatility and efficiency to your workshop

          Lathes have stood the test of time as some of the most efficient and multi-functional tools. They can be used on a wide variety of material surfaces and can serve a huge number of functions. Whether you need a small lathe for home use or an industrial size lathe for large-scale production, you can find the perfect piece of used equipment to suit your needs at LagerMaschinen. Visit this easy-to-use forum to find the best used machinery for your needs.

          LagerMaschinen - your home for used machines

          Lathes are critical pieces of equipment in a wide variety of sectors. A lathe is capable of grinding, cutting and finishing tiny parts for watch- and jewellery-making, as well as large-scale pieces for automobiles and airplanes. Whether you prefer the control offered by a manually operated lathe or the precision and efficiency of a computer numerical controlled (CNC) lathe, you can find a huge selection at LagerMaschinen, your best source for used machinery.

          Buying used machines is a smart investment

          Smart shoppers know that you dont have to sacrifice quality for affordability when buying machinery for your home or business. Buying used machines is a great way to get the quality you need without straining your budget. If youre in the market for lathes, saws, grinders or any other equipment, you can find a great selection of used machines at LagerMaschinen. Sort results by price, location or brand and find the best used machines around.