European network of stockholding machinery dealers

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:

          Metal Processing

          Machinelist: Metal Processing


          Center Lathe

          used Metal Processing Center Lathe ZMM C 400 TM


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-2028 · Center Lathe

          ZMM - C 400 TM - - 2020 -

          Technical details
          gebraucht20201658prompt, Zwischenverkauf vBulgarien26500 €︱ 1400 mm︱ 1000 mm︱ 200 mm︱ 52 mm︱ 235 mm︱ 320 mm︱ 66 M︱ 1250-2.240 1/min︱ 800.015 - 0.6 mm/U︱ 0.0075 - 0.3 mm/U︱
          driven by manual transmission 3-axes digital readout Fagor 40i quick change toolpostMultifix Type Bwith4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm spindle noseNr. 6 DIN 55027 four way rapid traverse device spindle dead center coolant equipment 1 pce. flange plate for lathe chuckØ 200 mm 1 adapter sleeve full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE"
            gebraucht
            2020
            1658
            prompt, Zwischenverkauf v
            Bulgarien
            26500 €
            1
            400 mm
            1000 mm
            200 mm
            52 mm
            235 mm
            320 mm
            6
            6 M
            12
            50-2.240 1/min
            80
            0.015 - 0.6 mm/U
            0.0075 - 0.3 mm/U
            Description :
            driven by manual transmission
            3-axes digital readout Fagor 40i
            quick change toolpostMultifix Type Bwith4 holders (3 square, 1 round)
            3-jaw chuck Bison 3204/DIN6350, Ø 200 mm
            spindle noseNr. 6 DIN 55027
            four way rapid traverse device
            spindle dead center
            coolant equipment
            1 pce. flange plate for lathe chuckØ 200 mm
            1 adapter sleeve
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            quick release tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"
          Datasheet
          Request / Contact
          used Metal Processing Center Lathe PINACHO PINACHO SP/165x750


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-2014 · Center Lathe

          PINACHO - PINACHO SP/165x750 - - 1999 -

          Technical details
          gebraucht19991676prompt, Zwischenverkauf vSpanien10500 €︱ 1335 mm︱ 750 mm︱ 165 mm︱ 42 mm︱ 175 mm︱ 250 mm︱ DIN55022-5 Nr. 460-2000 (9) 1/min︱ 0.05 - 0.75 mm/U︱ 0.025 - 0.375 mm/U︱ 0.5 - 7.5 mm︱ 60245 mm︱
          3-Jaw chucks Röhm Dm. 300 mm 4-fold steel holder with 4 inserts Chuck protection Cranking length 120 mm Sliding rotary guard with integrated machine lamp Rear chip splashboard Cooling equipment Lead screw and draw screw cover Foot brake User Manual in English COMPLIES WITH GERMAN UVV & AUSTRIAN AMVO
            gebraucht
            1999
            1676
            prompt, Zwischenverkauf v
            Spanien
            10500 €
            1
            335 mm
            750 mm
            165 mm
            42 mm
            175 mm
            250 mm
            DIN55022-5 Nr. 4
            60-2000 (9) 1/min
            0.05 - 0.75 mm/U
            0.025 - 0.375 mm/U
            0.5 - 7.5 mm
            60
            245 mm
            Description :
            3-Jaw chucks Röhm Dm. 300 mm
            4-fold steel holder with 4 inserts
            Chuck protection
            Cranking length 120 mm
            Sliding rotary guard with integrated machine lamp
            Rear chip splashboard
            Cooling equipment
            Lead screw and draw screw cover
            Foot brake
            User Manual in English

            COMPLIES WITH GERMAN UVV & AUSTRIAN AMVO
          Datasheet
          Request / Contact
          used Metal Processing Center Lathe ZMM CU / SU 582


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-2157 · Center Lathe

          ZMM - CU / SU 582 - - 1991 -

          Technical details
          gebraucht19911681ca. 2 Wochen ab AuftragseBulgarien7900 €︱ 1580 mm︱ 2000 mm︱ 285 mm︱ 72 mm︱ 380 mm︱ 400 mm︱ DIN55022, Größe 880 M︱ 11,2 - 2000 1/min︱ 0.04 - 3 mm︱ 255 mm︱ 140 mm︱ 75 mm︱
          3-axes digital read out RSF 3-jaw chuck Forkardt Dm. 315 mm steady rest 4x steel holder gap bed type chuck protection machine lamp coolant equipment operating manual in German WITH FOLLOWING DEFECT: the clockwise rotation does not engage, so the hand lever must remain held
            gebraucht
            1991
            1681
            ca. 2 Wochen ab Auftragse
            Bulgarien
            7900 €
            1
            580 mm
            2000 mm
            285 mm
            72 mm
            380 mm
            400 mm
            DIN55022, Größe 8
            80 M
            11,2 - 2000 1/min
            0.04 - 3 mm
            255 mm
            140 mm
            75 mm
            Description :
            3-axes digital read out RSF
            3-jaw chuck Forkardt Dm. 315 mm
            steady rest
            4x steel holder
            gap bed type
            chuck protection
            machine lamp
            coolant equipment
            operating manual in German

            WITH FOLLOWING DEFECT:
            the clockwise rotation does not engage, so the hand lever must remain held
          Datasheet
          Request / Contact
          used Metal Processing Center Lathe ZMM C 11 MCS


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-949 · Center Lathe

          ZMM - C 11 MCS - - -

          Technical details
          neuBulgarien50600 €︱ 1017.06 €︱ 600 mm︱ 2000 mm︱ 300 mm︱ 80 mm︱ 400 mm︱ 400 mm︱ 890 M︱ 320 - 100; 80 - 400; 400 - U/Min︱ 120640.5 - 120 mm︱ 60 - 1/4 Gänge/"︱ 0.125 - 30315 mm︱
          In contrast to the universal lathes, here the adjustment of the revolutions is infinitely variable by means of a frequency inverter. It is possible to ensure a "constant cutting speed" (V-const), i.e. when changing the diameter to be machined, the speed remains unchanged and thus a higher accuracy and smoothness of the surface is achieved. At the customer's request, the machines can be manufactured with a reading of the linear displacement and positioning by mounting a digital display. driven by variable speed control (3 steps) 3-axes digital readout Fagor with CSS (constant surface speed) quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm spindle dead center main motor with frequency invertor four way rapid traverse device longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.000 mm € 47.850,- turning length1.500 mm € 48.890,- turning length3.000 mm € 55.090,- turning length4.000 mm € 60.340,- turning length5.000 mm € 74.360,-
            neu
            Bulgarien
            50600 €
            1017.06 €
            600 mm
            2000 mm
            300 mm
            80 mm
            400 mm
            400 mm
            8
            90 M
            3
            20 - 100; 80 - 400; 400 - U/Min
            120
            64
            0.5 - 120 mm
            60 - 1/4 Gänge/"
            0.125 - 30
            315 mm
            Description :
            In contrast to the universal lathes, here the adjustment of the revolutions is infinitely variable by means of a frequency inverter.

            It is possible to ensure a "constant cutting speed" (V-const), i.e. when changing the diameter to be machined, the speed remains unchanged and thus a higher accuracy and smoothness of the surface is achieved. At the customer's request, the machines can be manufactured with a reading of the linear displacement and positioning by mounting a digital display.

            driven by variable speed control (3 steps)
            3-axes digital readout Fagor with CSS (constant surface speed)
            quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round)
            3-jaw chuck Bison 3204/DIN6350, Ø 250 mm
            spindle dead center
            main motor with frequency invertor
            four way rapid traverse device
            longitudinal stop for 1 position
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            quick release tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            FURTHER TURNING LENGTHS:

            turning length1.000 mm
            € 47.850,-

            turning length1.500 mm
            € 48.890,-

            turning length3.000 mm
            € 55.090,-

            turning length4.000 mm
            € 60.340,-

            turning length5.000 mm
            € 74.360,-
          Datasheet
          Request / Contact
          used Metal Processing Center Lathe ZMM CU 630 RD


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-927 · Center Lathe

          ZMM - CU 630 RD - - -

          Technical details
          neuBulgarien55600 €︱ 1117.56 €︱ 630 mm︱ 2000 mm︱ 315 mm︱ 103 mm︱ 430 mm︱ 400 mm︱ 11120 M︱ 316 - 63; 63 - 250; 315 - U/Min︱ 1200.04 - 12 mm/U︱ 0.02 - 6 mm/U︱ 0.5 - 120 mm︱ 060 - 1/4 Gänge/"︱ 0.125 - 30
          driven by variable speed control (2 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 315 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length 1.000 mm € 52.850,- turning length1.500 mm € 53.890,- turning length3.000 mm € 60.190,- turning length4.000 mm € 65.540,- turning length5.000 mm € 79.660,-
            neu
            Bulgarien
            55600 €
            1117.56 €
            630 mm
            2000 mm
            315 mm
            103 mm
            430 mm
            400 mm
            11
            120 M
            3
            16 - 63; 63 - 250; 315 - U/Min
            120
            0.04 - 12 mm/U
            0.02 - 6 mm/U
            0.5 - 120 mm
            060 - 1/4 Gänge/"
            0.125 - 30
            Description :
            driven by variable speed control (2 steps)
            3-axes digital readout FAGOR with CSS (constant surface speed)
            quick change toolpostAmestra with 4 holders (3 square, 1 round)
            3-jaw chuck Bison 3204/DIN6350, Ø 315 mm
            spindle dead center
            longitudinal stop for 1 position
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            quick release tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            FURTHER TURNING LENGTHS:

            turning length 1.000 mm
            € 52.850,-

            turning length1.500 mm
            € 53.890,-

            turning length3.000 mm
            € 60.190,-

            turning length4.000 mm
            € 65.540,-

            turning length5.000 mm
            € 79.660,-
          Datasheet
          Request / Contact
          used Metal Processing Center Lathe ZMM C 10 TH


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-959 · Center Lathe

          ZMM - C 10 TH - - -

          Technical details
          neuBulgarien62950 €︱ 1265.3 €︱ 860 mm︱ 1500 mm︱ 430 mm︱ 132 mm︱ 620 mm︱ 560 mm︱ 11140 M︱ 177,5 - 1015 1/min︱ 1500.039 - 18 mm/U︱ 0.02 - 9 mm/U︱ 0.5 - 180 mm︱ 60 - 1/6 Gänge/"︱ 0.125 - 45
          driven by conventional transmission 3-axes digital readout quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length2.000 mm € 65.560,- turning length3.000 mm € 75.720,- turning length4.000 mm € 81.220,- turning length5.000 mm € 92.680,- turning length6.000 mm € 105.180,-
            neu
            Bulgarien
            62950 €
            1265.3 €
            860 mm
            1500 mm
            430 mm
            132 mm
            620 mm
            560 mm
            11
            140 M
            17
            7,5 - 1015 1/min
            150
            0.039 - 18 mm/U
            0.02 - 9 mm/U
            0.5 - 180 mm
            60 - 1/6 Gänge/"
            0.125 - 45
            Description :
            driven by conventional transmission
            3-axes digital readout
            quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round)
            3-jaw chuck Bison3295/DIN6350, Ø 400 mm
            spindle dead center
            four way rapid traverse device
            foot pedal brake
            longitudinal stop for 1 position
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            quick release tailstock
            tailstock quill reducer
            mechanized movement of tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            FURTHER TURNING LENGTHS:

            turning length2.000 mm
            € 65.560,-

            turning length3.000 mm
            € 75.720,-

            turning length4.000 mm
            € 81.220,-

            turning length5.000 mm
            € 92.680,-

            turning length6.000 mm
            € 105.180,-
          Datasheet
          Request / Contact
          used Metal Processing Center Lathe ZMM C 10 TM


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-953 · Center Lathe

          ZMM - C 10 TM - - -

          Technical details
          neuBulgarien71220 €︱ 1431.52 €︱ 760 mm︱ 3000 mm︱ 380 mm︱ 132 mm︱ 520 mm︱ 560 mm︱ 11140 M︱ 177,5 - 1015 1/min︱ 1500.039 - 18 mm/U︱ 0.02 - 9 mm/U︱ 0.5 - 180 mm︱ 60 - 1/6 Gänge/"︱ 0.125 - 45
          driven by conventional transmission 3-axes digital readout quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 58.450,- turning length2.000 mm € 61.160,- turning length4.000 mm € 76.720,- turning length5.000 mm € 88.280,- turning length6.000 mm € 100.680,-
            neu
            Bulgarien
            71220 €
            1431.52 €
            760 mm
            3000 mm
            380 mm
            132 mm
            520 mm
            560 mm
            11
            140 M
            17
            7,5 - 1015 1/min
            150
            0.039 - 18 mm/U
            0.02 - 9 mm/U
            0.5 - 180 mm
            60 - 1/6 Gänge/"
            0.125 - 45
            Description :
            driven by conventional transmission
            3-axes digital readout
            quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round)
            3-jaw chuck Bison3295/DIN6350, Ø 400 mm
            spindle dead center
            four way rapid traverse device
            foot pedal brake
            longitudinal stop for 1 position
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            quick release tailstock
            tailstock quill reducer
            mechanized movement of tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            FURTHER TURNING LENGTHS:

            turning length1.500 mm
            € 58.450,-

            turning length2.000 mm
            € 61.160,-

            turning length4.000 mm
            € 76.720,-

            turning length5.000 mm
            € 88.280,-

            turning length6.000 mm
            € 100.680,-
          Datasheet
          Request / Contact
          used Metal Processing Center Lathe ZMM CU 500 M


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-473 · Center Lathe

          ZMM - CU 500 M - - -

          Technical details
          neuBulgarien40800 €︱ 828.24 €︱ 500 mm︱ 1500 mm︱ 250 mm︱ 72 mm︱ 300 mm︱ 400 mm︱ 880 M︱ 2120-2000 1/min︱ 1200.04 - 12 mm/U︱ 0.02 - 6 mm/U︱ 640.5 - 120 mm︱ 0.125 - 30
          driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.000 mm € 39.720,- turning length2.000 mm € 42.390,- turning length3.000 mm € 46.740,- turning length4.000 mm € 51.830,- turning length5.000 mm € 65.700,-
            neu
            Bulgarien
            40800 €
            828.24 €
            500 mm
            1500 mm
            250 mm
            72 mm
            300 mm
            400 mm
            8
            80 M
            21
            20-2000 1/min
            120
            0.04 - 12 mm/U
            0.02 - 6 mm/U
            64
            0.5 - 120 mm
            0.125 - 30
            Description :
            driven by manual transmission
            3-axes digital readout
            quick change toolpostAmestra with 4 holders (3 square, 1 round)
            3-jaw chuck Bison 3204/DIN6350, Ø 250 mm
            spindle dead center
            longitudinal stop for 1 position
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            quick release tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            FURTHER TURNING LENGTHS:

            turning length1.000 mm
            € 39.720,-

            turning length2.000 mm
            € 42.390,-

            turning length3.000 mm
            € 46.740,-

            turning length4.000 mm
            € 51.830,-

            turning length5.000 mm
            € 65.700,-
          Datasheet
          Request / Contact
          used Metal Processing Center Lathe ZMM CU 500 MRD


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-913 · Center Lathe

          ZMM - CU 500 MRD - - -

          Technical details
          neuBulgarien46190 €︱ 937.66 €︱ 500 mm︱ 1500 mm︱ 250 mm︱ 75 mm︱ 300 mm︱ 400 mm︱ 880 M︱ 325-100; 100-400; 500-2000 U/Min︱ 1200.04 - 12 mm/U︱ 0.02 - 6 mm/U︱ 0.5 - 120 mm︱ 0.125 - 301 - 240
          driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length 1.000 mm € 45.150,- turning length2.000 mm € 47.900,- turning length3.000 mm € 52.490,- turning length4.000 mm € 57.840,- turning length5.000 mm € 71.960,-
            neu
            Bulgarien
            46190 €
            937.66 €
            500 mm
            1500 mm
            250 mm
            75 mm
            300 mm
            400 mm
            8
            80 M
            3
            25-100; 100-400; 500-2000 U/Min
            120
            0.04 - 12 mm/U
            0.02 - 6 mm/U
            0.5 - 120 mm
            0.125 - 30
            1 - 240
            Description :
            driven by variable speed control (3 steps)
            3-axes digital readout FAGOR with CSS (constant surface speed)
            quick change toolpostAmestra with 4 holders (3 square, 1 round)
            3-jaw chuck Bison 3204/DIN6350, Ø 250 mm
            spindle dead center
            longitudinal stop for 1 position
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            quick release tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            FURTHER TURNING LENGTHS:

            turning length 1.000 mm
            € 45.150,-

            turning length2.000 mm
            € 47.900,-

            turning length3.000 mm
            € 52.490,-

            turning length4.000 mm
            € 57.840,-

            turning length5.000 mm
            € 71.960,-
          Datasheet
          Request / Contact
          used Metal Processing Center Lathe ZMM C 10 THS


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-961 · Center Lathe

          ZMM - C 10 THS - - -

          Technical details
          neuBulgarien70960 €︱ 1426.3 €︱ 860 mm︱ 1500 mm︱ 430 mm︱ 135 mm︱ 620 mm︱ 560 mm︱ 11140 M︱ 7 - 42; 28 - 170; 165 - 1 U/Min︱ 1500.039 - 18 mm/U︱ 0.02 - 9 mm/U︱ 0.5 - 180 mm︱ 60 - 1/6 Gänge/"︱ 0.125 - 45240
          driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center main motor with frequency invertor four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length2.000 mm € 73.670,- turning length3.000 mm € 84.100,- turning length4.000 mm € 89.860,- turning length5.000 mm € 101.570,- turning length6.000 mm € 114.310,-
            neu
            Bulgarien
            70960 €
            1426.3 €
            860 mm
            1500 mm
            430 mm
            135 mm
            620 mm
            560 mm
            11
            140 M
            7 - 42; 28 - 170; 165 - 1 U/Min
            150
            0.039 - 18 mm/U
            0.02 - 9 mm/U
            0.5 - 180 mm
            60 - 1/6 Gänge/"
            0.125 - 45
            240
            Description :
            driven by variable speed control (3 steps)
            3-axes digital readout FAGOR with CSS (constant surface speed)
            quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round)
            3-jaw chuck Bison3295/DIN6350, Ø 400 mm
            spindle dead center
            main motor with frequency invertor
            four way rapid traverse device
            foot pedal brake
            longitudinal stop for 1 position
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            quick release tailstock
            tailstock quill reducer
            mechanized movement of tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            FURTHER TURNING LENGTHS:

            turning length2.000 mm
            € 73.670,-

            turning length3.000 mm
            € 84.100,-

            turning length4.000 mm
            € 89.860,-

            turning length5.000 mm
            € 101.570,-

            turning length6.000 mm
            € 114.310,-
          Datasheet
          Request / Contact
          used Metal Processing Center Lathe ZMM C 10 TMS


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-955 · Center Lathe

          ZMM - C 10 TMS - - -

          Technical details
          neuBulgarien78300 €︱ 1573.83 €︱ 760 mm︱ 3000 mm︱ 380 mm︱ 132 mm︱ 520 mm︱ 560 mm︱ 11140 M︱ 37 - 42; 28 - 170; 165 - 1 U/Min︱ 1500.039 - 18 mm/U︱ 0.02 - 9 mm/U︱ 0.5 - 180 mm︱ 60 - 1/6 Gänge/"︱ 0.125 - 45
          driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center main motor with frequency invertor four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length 1.500 mm € 65.160,- turning length2.000 mm € 67.870,- turning length4.000 mm € 84.060,- turning length5.000 mm € 95.770,- turning length6.000 mm € 108.510,-
            neu
            Bulgarien
            78300 €
            1573.83 €
            760 mm
            3000 mm
            380 mm
            132 mm
            520 mm
            560 mm
            11
            140 M
            3
            7 - 42; 28 - 170; 165 - 1 U/Min
            150
            0.039 - 18 mm/U
            0.02 - 9 mm/U
            0.5 - 180 mm
            60 - 1/6 Gänge/"
            0.125 - 45
            Description :
            driven by variable speed control (3 steps)
            3-axes digital readout FAGOR with CSS (constant surface speed)
            quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round)
            3-jaw chuck Bison3295/DIN6350, Ø 400 mm
            spindle dead center
            main motor with frequency invertor
            four way rapid traverse device
            foot pedal brake
            longitudinal stop for 1 position
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            quick release tailstock
            tailstock quill reducer
            mechanized movement of tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            FURTHER TURNING LENGTHS:

            turning length 1.500 mm
            € 65.160,-

            turning length2.000 mm
            € 67.870,-

            turning length4.000 mm
            € 84.060,-

            turning length5.000 mm
            € 95.770,-

            turning length6.000 mm
            € 108.510,-
          Datasheet
          Request / Contact
          used Metal Processing Center Lathe ZMM C 400 TS


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-943 · Center Lathe

          ZMM - C 400 TS - - -

          Technical details
          neuBulgarien37580 €︱ 762.87 €︱ 400 mm︱ 750 mm︱ 200 mm︱ 52 mm︱ 235 mm︱ 320 mm︱ 66 M︱ 418-98; 48-265; 144-790; 3 U/Min︱ 800.015 - 0.6 mm/U︱ 0.0075 - 0.3 mm/U︱ 400.25 - 7.5 mm︱ 120 - 4 Gänge/"︱
          driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length 1.000 mm € 38.210,- turning length 1.500 mm € 39.140,-
            neu
            Bulgarien
            37580 €
            762.87 €
            400 mm
            750 mm
            200 mm
            52 mm
            235 mm
            320 mm
            6
            6 M
            4
            18-98; 48-265; 144-790; 3 U/Min
            80
            0.015 - 0.6 mm/U
            0.0075 - 0.3 mm/U
            40
            0.25 - 7.5 mm
            120 - 4 Gänge/"
            Description :
            driven by variable speed control (4 steps)
            3-axes digital readout FAGOR with CSS (constant surface speed)
            quick change toolpostAmestra with 4 holders (3 square, 1 round)
            3-jaw chuck Bison 3204/DIN6350, Ø 200 mm
            spindle dead center
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            quick release tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            FURTHER TURNING LENGTHS:

            turning length 1.000 mm
            € 38.210,-

            turning length 1.500 mm
            € 39.140,-
          Datasheet
          Request / Contact
          used Metal Processing Center Lathe ZMM CU 1250 RD


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-941 · Center Lathe

          ZMM - CU 1250 RD - - -

          Technical details
          neuBulgarien108130 €︱ 2151.79 €︱ 1320 mm︱ 1500 mm︱ 625 mm︱ 155 mm︱ 940 mm︱ 700 mm︱ 15160 M︱ 43,7 - 15,6; 14,7 - 62; 58 U/Min︱ 1600.032 - 38.9 mm/U︱ 0.016 - 19.45 mm/U︱ 0.5 - 480 mm︱ 1/16 - 60 Gänge/"︱ 0.125 - 120
          driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length3.000 mm € 121.780,- turning length4.000 mm € 129.460,- turning lenght 5.000 mm € 139.900,- turning length6.000 mm € 155.300,-
            neu
            Bulgarien
            108130 €
            2151.79 €
            1320 mm
            1500 mm
            625 mm
            155 mm
            940 mm
            700 mm
            15
            160 M
            4
            3,7 - 15,6; 14,7 - 62; 58 U/Min
            160
            0.032 - 38.9 mm/U
            0.016 - 19.45 mm/U
            0.5 - 480 mm
            1/16 - 60 Gänge/"
            0.125 - 120
            Description :
            driven by variable speed control (4 steps)
            3-axes digital readout FAGOR with CSS (constant surface speed)
            quick change toolpostAmestra with 4 holders (3 square, 1 round)
            3-jaw chuck Bison 3204/DIN6350, Ø 500 mm
            spindle dead center
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            tailstock quill reducer
            electric motor movement of tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            FURTHER TURNING LENGTHS:

            turning length3.000 mm
            € 121.780,-

            turning length4.000 mm
            € 129.460,-

            turning lenght 5.000 mm
            € 139.900,-

            turning length6.000 mm
            € 155.300,-
          Datasheet
          Request / Contact
          used Metal Processing Center Lathe ZMM CU 1250


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-939 · Center Lathe

          ZMM - CU 1250 - - -

          Technical details
          neuBulgarien98230 €︱ 1974.42 €︱ 1320 mm︱ 1500 mm︱ 625 mm︱ 155 mm︱ 940 mm︱ 700 mm︱ 15160 M︱ 5 - 10001600.032 - 38.9 mm/U︱ 0.016 - 19.45 mm/U︱ 0.5 - 480 mm︱ 60 - 1/16 Gänge/"︱ 0.125 - 120685 mm︱
          driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length3.000 mm € 111.510,- turning length4.000 mm € 118.820,- turning length5.000 mm € 120.010,- turning length6.000 mm € 144.140,-
            neu
            Bulgarien
            98230 €
            1974.42 €
            1320 mm
            1500 mm
            625 mm
            155 mm
            940 mm
            700 mm
            15
            160 M
            5 - 1000
            160
            0.032 - 38.9 mm/U
            0.016 - 19.45 mm/U
            0.5 - 480 mm
            60 - 1/16 Gänge/"
            0.125 - 120
            685 mm
            Description :
            driven by manual transmission
            3-axes digital readout
            quick change toolpostAmestra with 4 holders (3 square, 1 round)
            3-jaw chuck Bison 3204/DIN6350, Ø 500 mm
            spindle dead center
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            tailstock quill reducer
            electric motor movement of tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            FURTHER TURNING LENGTHS:

            turning length3.000 mm
            € 111.510,-

            turning length4.000 mm
            € 118.820,-

            turning length5.000 mm
            € 120.010,-

            turning length6.000 mm
            € 144.140,-
          Datasheet
          Request / Contact
          used Metal Processing Center Lathe ZMM CU 1000


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-933 · Center Lathe

          ZMM - CU 1000 - - -

          Technical details
          neuBulgarien92180 €︱ 1852.82 €︱ 1090 mm︱ 1500 mm︱ 500 mm︱ 155 mm︱ 690 mm︱ 700 mm︱ 15160 M︱ 241600.032 - 38.9 mm/U︱ 0.016 - 19.45 mm/U︱ 0.5 - 480 mm︱ 60 - 1/16 Gänge/"︱ 0.125 - 120525 mm︱
          driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS turning length3.000 mm € 105.460,- turning length4.000 mm € 112.870,- turning length5.000 mm € 123.060,- turning length6.000 mm € 138.190,-
            neu
            Bulgarien
            92180 €
            1852.82 €
            1090 mm
            1500 mm
            500 mm
            155 mm
            690 mm
            700 mm
            15
            160 M
            24
            160
            0.032 - 38.9 mm/U
            0.016 - 19.45 mm/U
            0.5 - 480 mm
            60 - 1/16 Gänge/"
            0.125 - 120
            525 mm
            Description :
            driven by manual transmission
            3-axes digital readout
            quick change toolpostAmestra with 4 holders (3 square, 1 round)
            3-jaw chuck Bison 3204/DIN6350, Ø 500 mm
            spindle dead center
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            tailstock quill reducer
            electric motor movement of tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            FURTHER TURNING LENGTHS

            turning length3.000 mm
            € 105.460,-

            turning length4.000 mm
            € 112.870,-

            turning length5.000 mm
            € 123.060,-

            turning length6.000 mm
            € 138.190,-
          Datasheet
          Request / Contact
          used Metal Processing Center Lathe ZMM CU 1000 RD


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-935 · Center Lathe

          ZMM - CU 1000 RD - - -

          Technical details
          neuBulgarien102070 €︱ 2031.19 €︱ 1090 mm︱ 1500 mm︱ 500 mm︱ 155 mm︱ 690 mm︱ 700 mm︱ 15160 M︱ 43,7 - 15,6; 14,7 - 62; 58 U/Min︱ 1600.032 - 38.9 mm/U︱ 0.016 - 19.45 mm/U︱ 0.5 - 480 mm︱ 60 - 1/16 Gänge/"︱ 0.125 - 120
          driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length3.000 mm € 115.920,- turning length4.000 mm € 123.600,- turning length5.000 mm € 133.940,- turning length6.000 mm € 149.440,-
            neu
            Bulgarien
            102070 €
            2031.19 €
            1090 mm
            1500 mm
            500 mm
            155 mm
            690 mm
            700 mm
            15
            160 M
            4
            3,7 - 15,6; 14,7 - 62; 58 U/Min
            160
            0.032 - 38.9 mm/U
            0.016 - 19.45 mm/U
            0.5 - 480 mm
            60 - 1/16 Gänge/"
            0.125 - 120
            Description :
            driven by variable speed control (4 steps)
            3-axes digital readout FAGOR with CSS (constant surface speed)
            quick change toolpostAmestra with 4 holders (3 square, 1 round)
            3-jaw chuck Bison 3204/DIN6350, Ø 500 mm
            spindle dead center
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            tailstock quill reducer
            electric motor movement of tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            FURTHER TURNING LENGTHS:

            turning length3.000 mm
            € 115.920,-

            turning length4.000 mm
            € 123.600,-

            turning length5.000 mm
            € 133.940,-

            turning length6.000 mm
            € 149.440,-
          Datasheet
          Request / Contact
          used Metal Processing Center Lathe ZMM CU 800


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-929 · Center Lathe

          ZMM - CU 800 - - -

          Technical details
          neuBulgarien86280 €︱ 1734.23 €︱ 890 mm︱ 1500 mm︱ 400 mm︱ 155 mm︱ 490 mm︱ 700 mm︱ 15160 M︱ 241600.032 - 38.9 mm/U︱ 0.016 - 19.45 mm/U︱ 0.5 - 480 mm︱ 60 - 1/16 Gänge/"︱ 0.125 - 120525 mm︱
          driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length2.000 mm € 89.420,- turning length3.000 mm € 99.400,- turning length4.000 mm € 106.810,- turning length5.000 mm € 116.900,- turning length6.000 mm € 132.130,-
            neu
            Bulgarien
            86280 €
            1734.23 €
            890 mm
            1500 mm
            400 mm
            155 mm
            490 mm
            700 mm
            15
            160 M
            24
            160
            0.032 - 38.9 mm/U
            0.016 - 19.45 mm/U
            0.5 - 480 mm
            60 - 1/16 Gänge/"
            0.125 - 120
            525 mm
            Description :
            driven by manual transmission
            3-axes digital readout
            quick change toolpostAmestra with 4 holders (3 square, 1 round)
            3-jaw chuck Bison 3204/DIN6350, Ø 500 mm
            spindle dead center
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            tailstock quill reducer
            electric motor movement of tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            FURTHER TURNING LENGTHS:

            turning length2.000 mm
            € 89.420,-

            turning length3.000 mm
            € 99.400,-

            turning length4.000 mm
            € 106.810,-

            turning length5.000 mm
            € 116.900,-

            turning length6.000 mm
            € 132.130,-
          Datasheet
          Request / Contact
          used Metal Processing Center Lathe ZMM CU 630


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-925 · Center Lathe

          ZMM - CU 630 - - -

          Technical details
          neuBulgarien49390 €︱ 1002.62 €︱ 630 mm︱ 2000 mm︱ 315 mm︱ 103 mm︱ 430 mm︱ 400 mm︱ 11120 M︱ 2112,5 - 1250 1/min︱ 1200.04 - 12 mm/U︱ 0.02 - 6 mm/U︱ 0.5 - 120 mm︱ 60 - 1/4 Gänge/"︱ 0.125 - 30
          driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 315 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.000 mm € 46.620,- turning length1.500 mm € 47.600,- turning length3.000 mm € 53.540,- turning length4.000 mm € 58.630,- turning length5.000 mm € 72.500,-
            neu
            Bulgarien
            49390 €
            1002.62 €
            630 mm
            2000 mm
            315 mm
            103 mm
            430 mm
            400 mm
            11
            120 M
            21
            12,5 - 1250 1/min
            120
            0.04 - 12 mm/U
            0.02 - 6 mm/U
            0.5 - 120 mm
            60 - 1/4 Gänge/"
            0.125 - 30
            Description :
            driven by manual transmission
            3-axes digital readout
            quick change toolpostAmestra with 4 holders (3 square, 1 round)
            3-jaw chuck Bison 3204/DIN6350, Ø 315 mm
            spindle dead center
            longitudinal stop for 1 position
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            quick release tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            FURTHER TURNING LENGTHS:

            turning length1.000 mm
            € 46.620,-

            turning length1.500 mm
            € 47.600,-

            turning length3.000 mm
            € 53.540,-

            turning length4.000 mm
            € 58.630,-

            turning length5.000 mm
            € 72.500,-
          Datasheet
          Request / Contact
          used Metal Processing Center Lathe ZMM CU 325 RD


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-911 · Center Lathe

          ZMM - CU 325 RD - - -

          Technical details
          neuBulgarien23160 €︱ 474.78 €︱ 400 mm︱ 750 mm︱ 165 mm︱ 32 mm︱ 190 mm︱ 200 mm︱ 54,5 M︱ 285-405; 470-2200 U/Min︱ 480.006 - 1.77 mm/U︱ 0.003 - 0.885 mm/U︱ 0.1 - 28 mm︱ 0.1 - 1.754 - 70
          driven by variable speed control (2 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 160 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.000 mm € 23.480,-
            neu
            Bulgarien
            23160 €
            474.78 €
            400 mm
            750 mm
            165 mm
            32 mm
            190 mm
            200 mm
            5
            4,5 M
            2
            85-405; 470-2200 U/Min
            48
            0.006 - 1.77 mm/U
            0.003 - 0.885 mm/U
            0.1 - 28 mm
            0.1 - 1.75
            4 - 70
            Description :
            driven by variable speed control (2 steps)
            3-axes digital readout FAGOR with CSS (constant surface speed)
            quick change toolpostAmestra with 4 holders (3 square, 1 round)
            3-jaw chuck Bison 3204/DIN6350, Ø 160 mm
            spindle dead center
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            quick release tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            FURTHER TURNING LENGTHS:

            turning length1.000 mm
            € 23.480,-
          Datasheet
          Request / Contact
          used Metal Processing Center Lathe ZMM CU 800 RD


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-931 · Center Lathe

          ZMM - CU 800 RD - - -

          Technical details
          neuBulgarien96170 €︱ 1933.02 €︱ 890 mm︱ 1500 mm︱ 400 mm︱ 155 mm︱ 490 mm︱ 700 mm︱ 15160 M︱ 43,7 - 15,6; 14,7 - 62; 58 U/Min︱ 1600.032 - 38.9 mm/U︱ 0.016 - 19.45 mm/U︱ 0.5 - 480 mm︱ 60 - 1/16 Gänge/"︱ 0.125 - 120
          driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length2.000 mm € 99.590,- turning length3.000 mm € 110.020,- turning length4.000 mm € 117.600,- turning length5.000 mm € 128.040,- turning length6.000 mm € 143.440,-
            neu
            Bulgarien
            96170 €
            1933.02 €
            890 mm
            1500 mm
            400 mm
            155 mm
            490 mm
            700 mm
            15
            160 M
            4
            3,7 - 15,6; 14,7 - 62; 58 U/Min
            160
            0.032 - 38.9 mm/U
            0.016 - 19.45 mm/U
            0.5 - 480 mm
            60 - 1/16 Gänge/"
            0.125 - 120
            Description :
            driven by variable speed control (4 steps)
            3-axes digital readout FAGOR with CSS (constant surface speed)
            quick change toolpostAmestra with 4 holders (3 square, 1 round)
            3-jaw chuck Bison 3204/DIN6350, Ø 500 mm
            spindle dead center
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            tailstock quill reducer
            electric motor movement of tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            FURTHER TURNING LENGTHS:

            turning length2.000 mm
            € 99.590,-

            turning length3.000 mm
            € 110.020,-

            turning length4.000 mm
            € 117.600,-

            turning length5.000 mm
            € 128.040,-

            turning length6.000 mm
            € 143.440,-
          Datasheet
          Request / Contact

          Lathe - cycle-controlled

          used Metal Processing Lathe -  cycle-controlled ZMM LS 600 M


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-2118 · Lathe - cycle-controlled

          ZMM - LS 600 M - - -

          Technical details
          neuca. 4 Monate ab AuftragseBulgarien68840 €︱ 1383.68 €︱ 600 mm︱ 1500 mm︱ 300 mm︱ 80 mm︱ 400 mm︱ 400 mm︱ 890 M︱ 320 - 100, 80 - 400, 400 - U/Min︱ max. 8 m/min︱ max. 8 m/min︱ 290 mm︱ 90 mm︱ 5 MK︱
          Fast and simple communication between the operator and the lathe. Simple workpieces are machined in the same way as on the universal lathe, but more efficient. Complicated workpieces are machined in the same way as on the universal lathe, but faster. Complicated workpieces are machined in the same way as on the CNC lathe, but easier. Based on the controller Schneider Magelis the intelligent, self-developed ZMM Sliven software leads the operator also without programming skills simple and fast to the finished workpiece. The interface is simple and with large icons, which is convenient in a specific work environment. The intuitive menu facilitates the transition to next screens and operations. Well visualized and structured cyclic operations,threads and steps. Possibility to set up the feeds, threads, etc. both mechanically and digitally (via the display). The manual, automatic and combined mode allows more precise operation compared to universal lathe. Easy transition from manual to automatic operation mode. ACCESSORIES: Siemens motor with Siemens Inverter (3 gear steps) CNC control Schneider Magelis Quick change tool post Amestra Multifix Typ C inkl. 4 Halter (3x Rechteck, 1 Rund) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm, max. 2500 r/min Spindle dead center Ball screw spindles for longitudinal and cross axes Coolant equipment Full length rear splash guard Spindle protection Splash guard for the chuck Levelling bols and shims Quick release tailstock Machine lamp Operating manual Machine according to "CE“ FURTHER TURNING LENGTHS: 1000 mm € 67.640,00 2000 mm € 70.240,00 3000 mm € 72.940,00 4000 mm € 75.840,00 5000 mm € 78.640,00
            neu
            ca. 4 Monate ab Auftragse
            Bulgarien
            68840 €
            1383.68 €
            600 mm
            1500 mm
            300 mm
            80 mm
            400 mm
            400 mm
            8
            90 M
            3
            20 - 100, 80 - 400, 400 - U/Min
            max. 8 m/min
            max. 8 m/min
            290 mm
            90 mm
            5 MK
            Description :
            Fast and simple communication between the operator and the lathe.
            Simple workpieces are machined in the same way as on the universal lathe, but more efficient.
            Complicated workpieces are machined in the same way as on the universal lathe, but faster.
            Complicated workpieces are machined in the same way as on the CNC lathe, but easier.
            Based on the controller Schneider Magelis the intelligent, self-developed ZMM Sliven software
            leads the operator also without programming skills simple and fast to the finished workpiece.
            The interface is simple and with large icons, which is convenient in a specific work environment.
            The intuitive menu facilitates the transition to next screens and operations.
            Well visualized and structured cyclic operations,threads and steps.
            Possibility to set up the feeds, threads, etc. both mechanically and digitally (via the display).
            The manual, automatic and combined mode allows more precise operation compared to universal lathe.
            Easy transition from manual to automatic operation mode.

            ACCESSORIES:
            Siemens motor with Siemens Inverter (3 gear steps)
            CNC control Schneider Magelis
            Quick change tool post Amestra Multifix Typ C inkl. 4 Halter (3x Rechteck, 1 Rund)
            3-jaw chuck Bison 3204/DIN6350, Ø 250 mm, max. 2500 r/min
            Spindle dead center
            Ball screw spindles for longitudinal and cross axes
            Coolant equipment
            Full length rear splash guard
            Spindle protection
            Splash guard for the chuck
            Levelling bols and shims
            Quick release tailstock
            Machine lamp
            Operating manual
            Machine according to "CE“

            FURTHER TURNING LENGTHS:

            1000 mm

            67.640,00

            2000 mm

            70.240,00

            3000 mm

            72.940,00

            4000 mm

            75.840,00

            5000 mm

            78.640,00
          Datasheet
          Request / Contact

          Drilling and Milling M/C

          used Metal Processing Drilling and Milling M/C ERLO TF 35


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1236 · Drilling and Milling M/C

          ERLO - TF 35 - - -

          Technical details
          neuca. 8 Wochen ab AuftragseSpanien47270 €︱ 959.58 €︱ 35 mm︱ MK 4390 mm︱ 94- 2.225 (16) 50 Hz 113 U/min︱ M351660 mm︱ 1510 mm︱ 2600 mm︱ 910 kg︱ 180 mm︱ 190 - 650 mm︱ 1310 mm︱ 125 mm︱ 400 x 420 mm︱ 0,10 - 0,18 - 0,24 (3) mm/min︱
          ERLO (MADE IN SPAIN) FOR DEMANDING WORKSHOP USE drilling and milling machine automatic feed precision electromagnetic clutches geared drive cross table fixed base and displaceable headstock control panel cooling equipment with electric motor pump hand wheel for fine tuning clamping device for tools adjustable stop drill guard
            neu
            ca. 8 Wochen ab Auftragse
            Spanien
            47270 €
            959.58 €
            35 mm
            MK 4
            390 mm
            94- 2.225 (16) 50 Hz 113 U/min
            M35
            1660 mm
            1510 mm
            2600 mm
            910 kg
            180 mm
            190 - 650 mm
            1310 mm
            125 mm
            400 x 420 mm
            0,10 - 0,18 - 0,24 (3) mm/min
            Description :
            ERLO (MADE IN SPAIN)

            FOR DEMANDING WORKSHOP USE

            drilling and milling machine
            automatic feed
            precision electromagnetic clutches
            geared drive
            cross table
            fixed base and displaceable headstock
            control panel
            cooling equipment with electric motor pump
            hand wheel for fine tuning
            clamping device for tools
            adjustable stop
            drill guard
          Datasheet
          Request / Contact

          Drilling Machine

          used Metal Processing Drilling Machine ERLO G-32


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1174 · Drilling Machine

          ERLO - G-32 - - 2021 -

          Technical details
          gebraucht20213974prompt, Zwischenverkauf vSpanien5100 €︱ 1132 mm︱ MK 3250 mm︱ 65 - 125 - 185 - 365 - 54 U/min︱ 1,8/2,6 kW︱ M24600 mm︱ 640 mm︱ 2020 mm︱ 260 kg︱ 100 mm︱ 85 - 635 mm︱
          demo machine ERLO (MADE IN SPAIN) FOR DEMANDING WORKSHOP USE geardrive machine manual feed let-right drilling table with t-slots depth adustable end tool ejector drill guard CE norms user manual in GERMAN (sample photo)
            gebraucht
            2021
            3974
            prompt, Zwischenverkauf v
            Spanien
            5100 €
            1
            1
            32 mm
            MK 3
            250 mm
            65 - 125 - 185 - 365 - 54 U/min
            1,8/2,6 kW
            M24
            600 mm
            640 mm
            2020 mm
            260 kg
            100 mm
            85 - 635 mm
            Description :
            demo machine

            ERLO (MADE IN SPAIN)

            FOR DEMANDING WORKSHOP USE

            geardrive machine
            manual feed
            let-right drilling
            table with t-slots
            depth adustable end
            tool ejector
            drill guard
            CE norms
            user manual in GERMAN

            (sample photo)
          Datasheet
          Request / Contact
          used Metal Processing Drilling Machine WMW WMW BS 40


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1224 · Drilling Machine

          WMW - WMW BS 40 - - 1962 -

          Technical details
          gebraucht19623962prompt, Zwischenverkauf v3950 €︱ 140 mm︱ MK 4350 mm︱ 32 - 1400 U/min︱ 5.73 kW︱ 1100 mm︱ 700 mm︱ 2650 mm︱ 1500 kg︱ automatisch 0,11 - 1,73 ( mm/U︱ 650 (max) mm︱ 780 x 650 mm︱ 280 mm︱
          Radial drilling machinewith 12 Revs 9 automatic feeds coolant pump Nouser manual DOES NOT COMPLY WITH THE GERMAN UVV & AUSTRIAN AMVO
            gebraucht
            1962
            3962
            prompt, Zwischenverkauf v
            3950 €
            1
            40 mm
            MK 4
            350 mm
            32 - 1400 U/min
            5.73 kW
            1100 mm
            700 mm
            2650 mm
            1500 kg
            automatisch 0,11 - 1,73 ( mm/U
            650 (max) mm
            780 x 650 mm
            280 mm
            Description :
            Radial drilling machinewith 12 Revs
            9 automatic feeds
            coolant pump
            Nouser manual

            DOES NOT COMPLY WITH THE GERMAN UVV & AUSTRIAN AMVO
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •   


          The right used metal processing machines at LagerMaschinen.de
          Used metal processing machines for every occasion

          Metalworking comprises a variety of applications involving the manipulation of metal from large-scale production of metals including lathing milling and cutting to smaller operations such as jewellery working. No matter the application used metal processing machines present an ideal way of obtaining the equipment you need at a price you can afford. Used metal processing machines such as milling machines can be manually operated or using computer numeric control which increases the overall precision of the machine. The type of used metal processing machines you need depends on the applications you use but at LagerMaschinen.de you are sure to find what you’re looking for.

          The right machine for every field of application

          Used metal processing machines can be used in several fields. Companies active in the computer industry can obtain used metal processing machines for circuit board soldering and companies that need to bond different pieces can find the welding machines that they need. If your company is in the business of making the precision parts needed to make other precision machines then used grinding machines can be a great way to expand or refurbish your production lines. Used metal processing machines can also be found for lathing drilling milling and several other uses.

          Used equipment from LagerMaschinen.de

          No matter the type of equipment you will find the used metal processing machines you need at LagerMaschinen.de. With its international network of suppliers this platform can provide you with the used metal processing machines you need at a price you can afford.

          Hesse+co Maschinenfabrik Gesmbh Industriezentrum Nö-Süd  2351 - Wiener Neudorf Straße 4 Objekt 8  Österreich
          Hesse+co Maschinenfabrik Gesmbh Industriezentrum Nö-Süd

          Straße 4 Objekt 8



          Contact Trader


            Hesse+co Maschinenfabrik Gesmbh Industriezentrum Nö-Süd
           Straße 4 Objekt 8
            2351 - Wiener Neudorf
            Österreich
            +43/2236/638 70-0
            +43/2236/636 62
            office@hesse-maschinen.com
            https://www.hesse-maschinen.com
            Contact person:

           




          Machine category


          Abkantpresse - hydraulisch · Abwickelhaspel · Alu-Kreissäge · Ausklinkmaschine · Bandschleifmaschine · Bandsäge - horizontal · Blechentgratungsmaschine · Blechrundbiegemaschine - 3 Walzen · Blechrundbiegemaschine - 4 Walzen · Bohr- und Fräsmaschine · Bohrmaschine · Bügelsäge · Bördelmaschine · CNC Plasma-Schneidanlage · Doppelschleifbock · Doppelständerexzenterpresse · Doppelständerpresse - Hydraulisch · Dornrohrbiegemaschine · Drehmaschine - zyklengesteuert · Einständer - Richtpresse · Einständerpresse - Hydraulisch · Exzenterpressen - Einständer · Falzformer · Flachschleifmaschine · Horizontal - Bandsägeautomat · Hydraulische Lochstanze · Hydraulische Presse · Kaltkreissäge · Kreisschere · Laserschneidmaschine · Lochstanze · Längs- und Querteilanlage · Profilieranlage · Profilstahlschere · Radialbohrmaschine · Ring- Profil- Biegemaschine · Rohrausschleifer · Rohrbiegemaschine · Rollenbahnen / Anschlag-Systeme · Schweißtisch · Schwenkbiegemaschine · Sickenmaschine · Spitzendrehmaschine · Stanz- und Nibbelmaschine · Tafelschere - hydraulisch · Tafelschere - mechanisch · Tischbohrwerk · Topfschleifmaschine · Viersäulenpresse - Hydraulisch · Vorschubapparat · Wasserstrahlschneidanlage · Werkstattpresse - hydraulisch · Werkzeugfräsmaschine - Universal · Werkzeugschleifmaschine - Universal ·