‚
European network of stockholding machinery dealers
+49 (0) 2389 5299080
Search service Sell used machines

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:
             View: 

              Search: 



          Showoffers:
          Build year From:
          1950
          Build year To:
          2020

          Section Steel Shear

          Machinelist: Section Steel Shear

          Section Steel Shear

          used Sheet metal working / shaeres / bending Section Steel Shear PEDDINGHAUS Modell 210 Super 16

          • Ambold Pressen GmbH
          • Sommeritzer Straße 43
          • 04626 Schmölln
          • Deutschland
          • +49 (0)3449183314
            +49 (0)3449123492
          • info@ambold-pressen.de
            www.ambold-pressen.de
          #1010-950 · Section Steel Shear

          PEDDINGHAUS - Modell 210 Super 16 - - unbekannt -

          Technical details
          round bar steel 50 mm︱square edge steel 45 mm︱L-beam 140 x 13 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          ab Standort preiswert gegen Gebot abzugeben!
            round bar steel 50 mm
            square edge steel 45 mm
            L-beam 140 x 13 mm
            Description :
            ab Standort preiswert gegen Gebot abzugeben!


        • Ambold Pressen GmbH
        • Sommeritzer Straße 43
        • 04626 Schmölln
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Section Steel Shear GEKA Bendicrop 50

          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland
          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-10067 · Section Steel Shear

          GEKA - Bendicrop 50 - - Neu -

          Technical details
          flat steel 350 x 15 mm︱round bar steel 35 mm︱square edge steel 30 mm︱L-beam 80x80x8 mm︱hole diameter in sheet thickness Ø 27 in 13 / Ø 20 in 18 mm︱ 500 kN︱throat 177 mm︱blade length 356 mm︱ 34 (Hub 15mm)︱engine output 3.0 kW︱weight 950 kg︱dimensions 1300x1100x1850 mm︱
          Standard equipment: - Knife set for flat steel - Complete knife set for angle steel shears - Complete normal punching equipment - Quick release device for punches up to 31 mm - Support table for punching device, rectangular notching and flat steel shears - Bending stamp with matrices V 40 and V 70 - Electric contact stop (1.000 mm)
            flat steel 350 x 15 mm
            round bar steel 35 mm
            square edge steel 30 mm
            L-beam 80x80x8 mm
            hole diameter in sheet thickness Ø 27 in 13 / Ø 20 in 18 mm
            500 kN
            throat 177 mm
            blade length 356 mm
            34 (Hub 15mm)
            engine output 3.0 kW
            weight 950 kg
            dimensions 1300x1100x1850 mm
            Description :
            Standard equipment:
            - Knife set for flat steel
            - Complete knife set for angle steel shears
            - Complete normal punching equipment
            - Quick release device for punches up to 31 mm
            - Support table for punching device, rectangular notching and flat steel shears
            - Bending stamp with matrices V 40 and V 70
            - Electric contact stop (1.000 mm)


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Section Steel Shear GEKA Multicrop 45

          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland
          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4050849 · Section Steel Shear

          GEKA - Multicrop 45 - - NEU -

          Technical details
          Punching force 45 t ︱hole diameter in sheet thickness Ø 27x13 mm︱ 24 /min︱L-beam 90° 80x80x8 mm︱L-beam 45° 60x60x6 mm︱flat steel 200x13 mm︱ 7 mm︱engine output 2,2 kW︱weight 760 kg︱
          Basic equipment: - Complete set of blades for flat steel shears - Complete knife set for angle steel shears - Compl. Standard punching device - Stamp quick release device for punches up to 27 mm diameter - Rectangular notching device compl. with hold down - notch - Support table for punching device
            Punching force 45 t
            hole diameter in sheet thickness Ø 27x13 mm
            24 /min
            L-beam 90° 80x80x8 mm
            L-beam 45° 60x60x6 mm
            flat steel 200x13 mm
            7 mm
            engine output 2,2 kW
            weight 760 kg
            Description :
            Basic equipment:
            - Complete set of blades for flat steel shears
            - Complete knife set for angle steel shears
            - Compl. Standard punching device
            - Stamp quick release device for punches up to 27 mm diameter
            - Rectangular notching device compl. with hold down
            - notch
            - Support table for punching device


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Section Steel Shear GEKA Bendicrop 60 S

          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland
          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4050851 · Section Steel Shear

          GEKA - Bendicrop 60 S - - NEU -

          Technical details
          32 /min︱Punching force 60 to ︱throat 250 mm︱ bis max. Ø 40x11 mm︱ 350x15 mm︱ 350x15 mm︱L-beam 90° 120x120x10 mm︱ 45 mm︱square edge steel 40 mm︱ 10 mm︱ Aufnahme bis max. 150x10 ︱engine output 5,5 kW︱weight ca. 1600 kg︱
          Basic equipment: - Flat steel shears with knife set - Angle shears with knife set - Punch with quick release device for punches up to 40 mm - Support table for punching device - Triangular notching device - Support table for notching - bending station - Bending stamp with matrices V 40 and V 70 - electrical contact stop (1 meter)
            32 /min
            Punching force 60 to
            throat 250 mm
            bis max. Ø 40x11 mm
            350x15 mm
            350x15 mm
            L-beam 90° 120x120x10 mm
            45 mm
            square edge steel 40 mm
            10 mm
            Aufnahme bis max. 150x10
            engine output 5,5 kW
            weight ca. 1600 kg
            Description :
            Basic equipment:
            - Flat steel shears with knife set
            - Angle shears with knife set
            - Punch with quick release device for punches up to 40 mm
            - Support table for punching device
            - Triangular notching device
            - Support table for notching
            - bending station
            - Bending stamp with matrices V 40 and V 70
            - electrical contact stop (1 meter)


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Section Steel Shear GEKA Bendicrop 60 SD

          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland
          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4050852 · Section Steel Shear

          GEKA - Bendicrop 60 SD - - NEU -

          Technical details
          32 /min︱Punching force 60 to ︱throat 500 mm︱ 40x11 mm︱ 350x15 mm︱ 350x15 mm︱L-beam 90° 120x120x10 mm︱ 45 mm︱square edge steel 40 mm︱ 10 mm︱ Aufnahme bis max. 150x10 ︱engine output 5,5 kW︱weight 2012 kg︱
          Basic equipment: - Flat steel shears with knife set - Angle shears with knife set - Punch with quick release device for punches up to 40 mm - Support table for punching device - Triangular notching device - Support table for notching - bending station - Bending stamp with matrices V 40 and V 70 - electrical contact stop (1 meter)
            32 /min
            Punching force 60 to
            throat 500 mm
            40x11 mm
            350x15 mm
            350x15 mm
            L-beam 90° 120x120x10 mm
            45 mm
            square edge steel 40 mm
            10 mm
            Aufnahme bis max. 150x10
            engine output 5,5 kW
            weight 2012 kg
            Description :
            Basic equipment:
            - Flat steel shears with knife set
            - Angle shears with knife set
            - Punch with quick release device for punches up to 40 mm
            - Support table for punching device
            - Triangular notching device
            - Support table for notching
            - bending station
            - Bending stamp with matrices V 40 and V 70
            - electrical contact stop (1 meter)


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Section Steel Shear GEKA Minicrop 45

          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland
          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-10044 · Section Steel Shear

          GEKA - Minicrop 45 - - Neu -

          Technical details
          45 to.︱no. of strokes 24 Hub/min︱hole diameter in sheet thickness max. Ø 27 in 13 mm︱ 80x80x8 ︱ 60x60x6 mm︱flat steel 300x10/200x13 mm︱ 7 mm︱engine output 2.2 kW︱range L-W-H 1550x820x1540 mm︱weight 760 kg︱
          Standard equipment: - Complete knife set for flat steel shears - complete knife set for angle steel shears - complete standard punching equipment - Stamp quick release device for punches up to Ø 27 mm - Rectangular notching device complete with hold-down device - notch - Support table for punching device
            45 to.
            no. of strokes 24 Hub/min
            hole diameter in sheet thickness max. Ø 27 in 13 mm
            80x80x8
            60x60x6 mm
            flat steel 300x10/200x13 mm
            7 mm
            engine output 2.2 kW
            range L-W-H 1550x820x1540 mm
            weight 760 kg
            Description :
            Standard equipment:
            - Complete knife set for flat steel shears
            - complete knife set for angle steel shears
            - complete standard punching equipment
            - Stamp quick release device for punches up to Ø 27 mm
            - Rectangular notching device complete with hold-down device
            - notch
            - Support table for punching device


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Section Steel Shear GEKA Hydracrop 80 S

          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland
          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4050996 · Section Steel Shear

          GEKA - Hydracrop 80 S - - NEU -

          Technical details
          round bar steel 45 mm︱square edge steel 45 mm︱L-beam 12 mm︱ 40 ︱flat steel 450x15 mm︱L-beam 90° 152x152x13 mm︱ 45 mm︱square edge steel 45 mm︱ 12 mm︱weight of the machine ca. 2323 t︱
            round bar steel 45 mm
            square edge steel 45 mm
            L-beam 12 mm
            40
            flat steel 450x15 mm
            L-beam 90° 152x152x13 mm
            45 mm
            square edge steel 45 mm
            12 mm
            weight of the machine ca. 2323 t


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Section Steel Shear GEKA Hydracrop 55 S

          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland
          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4050853 · Section Steel Shear

          GEKA - Hydracrop 55 S - - Neu -

          Technical details
          10 mm︱Punching force 55 to︱ 40x10 mm︱flat steel 300x15 oder 200x20 mm︱L-beam 90° 120x120x10 mm︱L-beam 45° 70x70x7 mm︱ 40 mm︱square edge steel 40 mm︱ 37 /min.︱throat 250 mm︱weight of the machine ca. 1.600 kg︱
          Basic equipment: - Complete set of blades for flat steel shears - Complete knife set for bar cutter - Complete knife set for angle steel shears - Compl. Standard punching device - Stamp quick release device for punches up to 40 mm diameter - Rectangle notch compl. with hold downs - Complete knife set below for rectangular notching - Upper tool for rectangular notching - Support table for flat material - Punching table with stop - Notch with stop
            10 mm
            Punching force 55 to
            40x10 mm
            flat steel 300x15 oder 200x20 mm
            L-beam 90° 120x120x10 mm
            L-beam 45° 70x70x7 mm
            40 mm
            square edge steel 40 mm
            37 /min.
            throat 250 mm
            weight of the machine ca. 1.600 kg
            Description :
            Basic equipment:
            - Complete set of blades for flat steel shears
            - Complete knife set for bar cutter
            - Complete knife set for angle steel shears
            - Compl. Standard punching device
            - Stamp quick release device for punches up to 40 mm diameter
            - Rectangle notch compl. with hold downs
            - Complete knife set below for rectangular notching
            - Upper tool for rectangular notching
            - Support table for flat material
            - Punching table with stop
            - Notch with stop


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Section Steel Shear GEKA Hydracrop 110 S

          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland
          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4050854 · Section Steel Shear

          GEKA - Hydracrop 110 S - - NEU -

          Technical details
          28 min.︱Punching force 110 to︱ 40x20 mm︱flat steel 600x15 oder 400x20 mm︱L-beam 90° 160x160x16 mm︱L-beam 45° 70x70x7 mm︱ 50 mm︱square edge steel 50 mm︱ 13 mm︱throat 300 mm︱
          Basic equipment: - Complete set of blades for flat steel shears - Complete knife set for bar cutter - Complete knife set for angle steel shears - Compl. Standard punching device - Stamp quick release device for punches up to 40 mm diameter - Rectangle notch compl. with hold downs - Complete knife set below for rectangular notching - Upper tool for rectangular notching - Support table for flat material - Punching table with stop - Notch with stop
            28 min.
            Punching force 110 to
            40x20 mm
            flat steel 600x15 oder 400x20 mm
            L-beam 90° 160x160x16 mm
            L-beam 45° 70x70x7 mm
            50 mm
            square edge steel 50 mm
            13 mm
            throat 300 mm
            Description :
            Basic equipment:
            - Complete set of blades for flat steel shears
            - Complete knife set for bar cutter
            - Complete knife set for angle steel shears
            - Compl. Standard punching device
            - Stamp quick release device for punches up to 40 mm diameter
            - Rectangle notch compl. with hold downs
            - Complete knife set below for rectangular notching
            - Upper tool for rectangular notching
            - Support table for flat material
            - Punching table with stop
            - Notch with stop


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Section Steel Shear HUVEMA HU 66

          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland
          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-010028 · Section Steel Shear

          HUVEMA - HU 66 - - 2019 -

          Technical details
          round bar steel 45 mm︱square edge steel 40 x 40 mm︱L-beam mm︱hole punhing press: pressure 66 t︱punch diameter 27 x 18 ︱stroke 80 mm︱throat 300 mm︱flat material 16 x 250 mm︱angle steel/side length 125 x 125 x 12 mm︱total power requirement 4 kW︱weight of the machine ca. 1,6 t︱dimensions of the machine ca. 1,65 x 0,8 x 1,8 m︱
          • new machine, available from stock
            round bar steel 45 mm
            square edge steel 40 x 40 mm
            hole punhing press: pressure 66 t
            punch diameter 27 x 18
            stroke 80 mm
            throat 300 mm
            flat material 16 x 250 mm
            angle steel/side length 125 x 125 x 12 mm
            total power requirement 4 kW
            weight of the machine ca. 1,6 t
            dimensions of the machine ca. 1,65 x 0,8 x 1,8 m
            Description :
            • new machine, available from stock


        • Feyen Maschinen GmbH
        • Gelleperstr. 10
        • 47809 Krefeld
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Section Steel Shear GEKA HYDRACROP 55 SD

          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland
          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9412173 · Section Steel Shear

          GEKA - HYDRACROP 55 SD - - 2007 -

          Technical details
          puncher 55.0 t︱round bar steel 40.0 mm︱square edge steel 40.0 x 40.0 mm︱L-beam 120 x 120 x 10 mm︱hole punching press: capacity (dia. x thick.) Ø 40.0 x 10.0 mm︱shear: flat material 300 x 15 / 200 x 20 mm︱total power requirement 3.0 kW︱weight 1320 kg︱range L-W-H 1600 x 800 x 1680 mm︱
          ** good condition - barely used (!!) ** current new price approx. 18.600 euros ** Special price on request Furnishing: - electro-hydraulic profile steel shear with 4 work stations * Flat steel scissors * Profile steel scissors * Hole punch * Notching station - electrical contact length stop - continuous stroke adjustment - Support table at hole punching & notching station * including sliding stops - 2x freely movable foot switches - Material scraper - side storage options - various accessories - Emergency stop button - Connection cable including 16A plug - Operation manual * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9412173
            puncher 55.0 t
            round bar steel 40.0 mm
            square edge steel 40.0 x 40.0 mm
            L-beam 120 x 120 x 10 mm
            hole punching press: capacity (d. Ø 40.0 x 10.0 mm
            shear: flat material 300 x 15 / 200 x 20 mm
            total power requirement 3.0 kW
            weight 1320 kg
            range L-W-H 1600 x 800 x 1680 mm
            Description :
            ** good condition - barely used (!!)
            ** current new price approx. 18.600 euros
            ** Special price on request

            Furnishing:
            - electro-hydraulic profile steel shear with 4 work stations
            * Flat steel scissors
            * Profile steel scissors
            * Hole punch
            * Notching station
            - electrical contact length stop
            - continuous stroke adjustment
            - Support table at hole punching & notching station
            * including sliding stops
            - 2x freely movable foot switches
            - Material scraper
            - side storage options
            - various accessories
            - Emergency stop button
            - Connection cable including 16A plug
            - Operation manual

            * Machine link:
            https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9412173


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Section Steel Shear PEDDINGHAUS PEDDIMASTER 80/110

          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland
          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9412137 · Section Steel Shear

          PEDDINGHAUS - PEDDIMASTER 80/110 - - 1991 (2021) -

          Technical details
          pressure 80,0 / 110 t︱punching cross-cut in cmm 27,0 in 20 mm︱L-beam 120 x 13 mm︱L-beam T 120 x 12 mm︱shear: flat material 500x18 / 400x19 mm︱throat 510 mm︱work height max. 1050 mm︱total power requirement 6,5 kW︱weight 1650 kg︱range L-W-H 1750 x 850 x 1850 mm︱
          ** very good condition (!!) Furnishing: - hydraulic, combined profile steel shears * with release station * with punching station .. punching capacity 800kN * Flat steel shears .. Shear capacity 100kN * Angle steel scissors * Angle steel knife for cutting 90 ° & 45 ° miters * Cutting angle steel + T-steel + I-steel - Support table at the notching station - Scraper at the punching station - Freely movable foot switch - Central lubrication - Safety devices - Operating instructions (PDF)
            pressure 80,0 / 110 t
            punching cross-cut in cmm 27,0 in 20 mm
            L-beam 120 x 13 mm
            L-beam T 120 x 12 mm
            shear: flat material 500x18 / 400x19 mm
            throat 510 mm
            work height max. 1050 mm
            total power requirement 6,5 kW
            weight 1650 kg
            range L-W-H 1750 x 850 x 1850 mm
            Description :
            ** very good condition (!!)

            Furnishing:
            - hydraulic, combined profile steel shears
            * with release station
            * with punching station .. punching capacity 800kN
            * Flat steel shears .. Shear capacity 100kN
            * Angle steel scissors
            * Angle steel knife for cutting 90 ° & 45 ° miters
            * Cutting angle steel + T-steel + I-steel
            - Support table at the notching station
            - Scraper at the punching station
            - Freely movable foot switch
            - Central lubrication
            - Safety devices
            - Operating instructions (PDF)


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Section Steel Shear PEDDINGHAUS Peddimax 801

          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland
          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-34179 · Section Steel Shear

          PEDDINGHAUS - Peddimax 801 - - -

          Technical details
          pressure 080 t︱punching cross-cut in cmm 31,0 in 25 mm︱shear: flat material 500x18 / 300x22 mm︱L-beam 150 x 12 mm︱round bar steel 50 + 25 mm︱square edge steel 50 + 30 mm︱throat 510 mm︱blade length 500 mm︱work height max. ca. 1.100 mm︱total power requirement 7,5 kW︱weight of the machine ca. 3200 kg︱dimensions of the machine ca. 2000 x 1000 x 2100 mm︱
          ** from a maintenance workshop Furnishing: - Robust electro-hydraulic combined profile steel shears - Notcher, hole punch, bar steel knife, profile knife and tin snips - Stop table at the hole punch, with blank holder - Stop table at the notcher - 2x floating footswitches - Stroke adjustment for fast stroke sequence - 1x PEDDINGHAUS contact length stop: 1.000 mm - Safety devices - Operating instructions in German
            pressure 080 t
            punching cross-cut in cmm 31,0 in 25 mm
            shear: flat material 500x18 / 300x22 mm
            L-beam 150 x 12 mm
            round bar steel 50 + 25 mm
            square edge steel 50 + 30 mm
            throat 510 mm
            blade length 500 mm
            work height max. ca. 1.100 mm
            total power requirement 7,5 kW
            weight of the machine ca. 3200 kg
            dimensions of the machine ca. 2000 x 1000 x 2100 mm
            Description :
            ** from a maintenance workshop

            Furnishing:
            - Robust electro-hydraulic combined profile steel shears
            - Notcher, hole punch, bar steel knife, profile knife and tin snips
            - Stop table at the hole punch, with blank holder
            - Stop table at the notcher
            - 2x floating footswitches
            - Stroke adjustment for fast stroke sequence
            - 1x PEDDINGHAUS contact length stop: 1.000 mm
            - Safety devices
            - Operating instructions in German


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Section Steel Shear ERMAK EKM 60 TN

          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland
          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8411002 · Section Steel Shear

          ERMAK - EKM 60 TN - - -

          Technical details
          pressure 60,0 t︱square edge steel 35,0 mm︱round bar steel 40,0 mm︱L-beam 120x120x12 mm︱punching cross-cut in cmm Ø28 in 15 / Ø38 in 11 mm︱throat 220 mm︱flat steel 200x20 / 300x15 mm︱blade length 317 mm︱oil volume 45,0 ltr.︱work height max. 940 / 1140 mm︱strokes per minute max. 26 ︱work stroke 55,0 mm︱total power requirement 4,0 kW︱weight of the machine ca. 1425 kg.︱Dimensions (HxWxD) 1510 x 590 x 1570 mm︱
          Furnishing: - Support table at the hole punch - Support table on the square notcher - foot switch - Bed. Instructions - CE declaration + MUBEA - punch and die holder
            pressure 60,0 t
            square edge steel 35,0 mm
            round bar steel 40,0 mm
            L-beam 120x120x12 mm
            punching cross-cut in cmm Ø28 in 15 / Ø38 in 11 mm
            throat 220 mm
            flat steel 200x20 / 300x15 mm
            blade length 317 mm
            oil volume 45,0 ltr.
            work height max. 940 / 1140 mm
            strokes per minute max. 26
            work stroke 55,0 mm
            total power requirement 4,0 kW
            weight of the machine ca. 1425 kg.
            Dimensions (HxWxD) 1510 x 590 x 1570 mm
            Description :
            Furnishing:
            - Support table at the hole punch
            - Support table on the square notcher
            - foot switch
            - Bed. Instructions
            - CE declaration

            + MUBEA - punch and die holder


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Section Steel Shear WMW ScFDLA 13

          • SK Maschinen-Service GmbH
          • Tackweg 4
          • 47918 Tönisvorst
          • Deutschland
          • 02151 79350
            02151 793535
          • info@sk-maschinen.de
            www.sk-maschinen.de
          #1038-80472 · Section Steel Shear

          WMW - ScFDLA 13 - - -

          Technical details
          round bar steel 36 mm︱square edge steel 30 mm︱L-beam 100x10 mm︱
            round bar steel 36 mm
            square edge steel 30 mm
            L-beam 100x10 mm
            Description :



        • SK Maschinen-Service GmbH
        • Tackweg 4
        • 47918 Tönisvorst
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Section Steel Shear PEDDINGHAUS PEDDIMASTER 80/110

          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland
          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-34154 · Section Steel Shear

          PEDDINGHAUS - PEDDIMASTER 80/110 - - -

          Technical details
          pressure 080-110 t︱punching cross-cut in cmm 27,0 in 20 mm︱L-beam 120 x 13 mm︱L-beam T 120 x 12 mm︱shear: flat material 500x18 / 400x19 mm︱throat 510 mm︱work height max. 1050 mm︱total power requirement 6,5 kW︱weight 1650 kg︱range L-W-H 1750 x 850 x 1850 mm︱
          ** very good condition (!!) Furnishing: - hydraulic, combined profile steel shears * with release station * with punching station .. punching capacity 800kN * Flat steel shears .. Shear capacity 100kN * Angle steel scissors * Angle steel knife for cutting 90 ° & 45 ° miters * Cutting angle steel + T-steel + I-steel - Support table at the notching station - Scraper at the punching station - Freely movable foot switch - Central lubrication - Safety devices - Operating instructions (PDF)
            pressure 080-110 t
            punching cross-cut in cmm 27,0 in 20 mm
            L-beam 120 x 13 mm
            L-beam T 120 x 12 mm
            shear: flat material 500x18 / 400x19 mm
            throat 510 mm
            work height max. 1050 mm
            total power requirement 6,5 kW
            weight 1650 kg
            range L-W-H 1750 x 850 x 1850 mm
            Description :
            ** very good condition (!!)

            Furnishing:
            - hydraulic, combined profile steel shears
            * with release station
            * with punching station .. punching capacity 800kN
            * Flat steel shears .. Shear capacity 100kN
            * Angle steel scissors
            * Angle steel knife for cutting 90 ° & 45 ° miters
            * Cutting angle steel + T-steel + I-steel
            - Support table at the notching station
            - Scraper at the punching station
            - Freely movable foot switch
            - Central lubrication
            - Safety devices
            - Operating instructions (PDF)


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Section Steel Shear PEDDINGHAUS Peddimax 801

          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland
          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9412158 · Section Steel Shear

          PEDDINGHAUS - Peddimax 801 - - -

          Technical details
          pressure 80,0 t︱punching cross-cut in cmm 31,0 in 25 mm︱shear: flat material 500x18 / 300x22 mm︱L-beam 150 x 12 mm︱round bar steel 50 + 25 mm︱square edge steel 50 + 30 mm︱throat 510 mm︱blade length 500 mm︱work height max. ca. 1.100 mm︱total power requirement 7,5 kW︱weight of the machine ca. 3200 kg︱dimensions of the machine ca. 2000 x 1000 x 2100 mm︱
          ** from a maintenance workshop Furnishing: - Robust electro-hydraulic combined profile steel shears - Notcher, hole punch, bar steel knife, profile knife and tin snips - Stop table at the hole punch, with blank holder - Stop table at the notcher - 2x floating footswitches - Stroke adjustment for fast stroke sequence - 1x PEDDINGHAUS contact length stop: 1.000 mm - Safety devices - Operating instructions in German
            pressure 80,0 t
            punching cross-cut in cmm 31,0 in 25 mm
            shear: flat material 500x18 / 300x22 mm
            L-beam 150 x 12 mm
            round bar steel 50 + 25 mm
            square edge steel 50 + 30 mm
            throat 510 mm
            blade length 500 mm
            work height max. ca. 1.100 mm
            total power requirement 7,5 kW
            weight of the machine ca. 3200 kg
            dimensions of the machine ca. 2000 x 1000 x 2100 mm
            Description :
            ** from a maintenance workshop

            Furnishing:
            - Robust electro-hydraulic combined profile steel shears
            - Notcher, hole punch, bar steel knife, profile knife and tin snips
            - Stop table at the hole punch, with blank holder
            - Stop table at the notcher
            - 2x floating footswitches
            - Stroke adjustment for fast stroke sequence
            - 1x PEDDINGHAUS contact length stop: 1.000 mm
            - Safety devices
            - Operating instructions in German


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Section Steel Shear KINGSLAND COMPACT 45 HYDRAULIC

          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland
          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9412169 · Section Steel Shear

          KINGSLAND - COMPACT 45 HYDRAULIC - - -

          Technical details
          punching pressure 45.0 t︱punch diameter 22 in 15.0 mm︱punch diameter 38 in 8.0 mm︱round bar steel 30.0 mm︱square edge steel 25.0 ︱L-beam 100 x 10.0 mm︱shear: flat material 300 x 12.0 mm︱adjustment of stroke 0 - 55 mm︱work height max. 940 / 1140 mm︱strokes per minute 34 ︱punch diameter max. 110 mm︱voltage 400 V︱total power requirement 4.5 kW︱weight 1245 kg︱dimensions 1520 x 590 x 1700 mm︱
          ** from a maintenance workshop ** New price ~ 13.000 euros ** Special price on request Furnishing: - electro-hydraulic profile steel shear - Punching station, flat steel shears, angle/profile steel shears, .. notching station - continuous adjustment of the stroke path - very compact design - Support table at notching and punching station - side support tables - 1x manually adjustable contact length stop - 1x freely movable foot switch - Central lubrication * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9412169
            punching pressure 45.0 t
            punch diameter 22 in 15.0 mm
            punch diameter 38 in 8.0 mm
            round bar steel 30.0 mm
            square edge steel 25.0
            L-beam 100 x 10.0 mm
            shear: flat material 300 x 12.0 mm
            adjustment of stroke 0 - 55 mm
            work height max. 940 / 1140 mm
            strokes per minute 34
            punch diameter max. 110 mm
            voltage 400 V
            total power requirement 4.5 kW
            weight 1245 kg
            dimensions 1520 x 590 x 1700 mm
            Description :
            ** from a maintenance workshop
            ** New price ~ 13.000 euros
            ** Special price on request

            Furnishing:
            - electro-hydraulic profile steel shear
            - Punching station, flat steel shears, angle/profile steel shears,
            .. notching station
            - continuous adjustment of the stroke path
            - very compact design
            - Support table at notching and punching station
            - side support tables
            - 1x manually adjustable contact length stop
            - 1x freely movable foot switch
            - Central lubrication

            * Machine link:
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9412169


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Section Steel Shear KINGSLAND MULTI 80 HYDRAULIC

          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland
          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9412168 · Section Steel Shear

          KINGSLAND - MULTI 80 HYDRAULIC - - -

          Technical details
          punching pressure 80.0 t︱punch diameter 28 x 20.0 mm︱punch diameter 57 in 9.0 mm︱throat 320 mm︱round bar steel 45.0 mm︱square edge steel 45.0 ︱L-beam 150 x 13.0 mm︱shear: flat material 300 x 20.0 mm︱adjustment of stroke 0 - 55 mm︱work height max. 1130 / 890 mm︱strokes per minute 34.0 ︱punch diameter max. 160 mm︱voltage 400 V︱total power requirement 7.5 kW︱weight 2095 kg︱dimensions 1760 x 710 x 1830 mm︱
          ** New price ~ 24.000 euros ** Special price on request Furnishing: - electro-hydraulic profile steel shears with a large radius - Punching station, flat steel shears, angle/profile steel shears, .. notching station - continuous adjustment of the stroke path - very compact design - Support table at notching and punching station - KINGSLAND electrical contact length stop - Protective devices at workstations - 2x freely movable foot switches - User manual (PDF) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9412168
            punching pressure 80.0 t
            punch diameter 28 x 20.0 mm
            punch diameter 57 in 9.0 mm
            throat 320 mm
            round bar steel 45.0 mm
            square edge steel 45.0
            L-beam 150 x 13.0 mm
            shear: flat material 300 x 20.0 mm
            adjustment of stroke 0 - 55 mm
            work height max. 1130 / 890 mm
            strokes per minute 34.0
            punch diameter max. 160 mm
            voltage 400 V
            total power requirement 7.5 kW
            weight 2095 kg
            dimensions 1760 x 710 x 1830 mm
            Description :
            ** New price ~ 24.000 euros
            ** Special price on request

            Furnishing:
            - electro-hydraulic profile steel shears with a large radius
            - Punching station, flat steel shears, angle/profile steel shears,
            .. notching station
            - continuous adjustment of the stroke path
            - very compact design
            - Support table at notching and punching station
            - KINGSLAND electrical contact length stop
            - Protective devices at workstations
            - 2x freely movable foot switches
            - User manual (PDF)

            * Machine link:
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9412168


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Section Steel Shear GEKA BENDICROP 85 SD

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-881 · Section Steel Shear

          GEKA - BENDICROP 85 SD - - -

          Technical details
          neu ︱ ca. 8 Wochen ab Auftragse ︱ Spanien ︱ 34200 €︱ 694.26 €︱ 85 to︱ 500 mm︱ 5 ︱ 40/15 bzw. 24x24 mm︱ 450x15 / 450x18 mm︱ 475 mm︱ 130x130x13 mm︱ 45/40 mm︱ 12 mm︱ 200x12 mm︱ 9,2 kW︱ 2300 mm︱ 1200 mm︱ 2100 mm︱ 2400 kg︱
          hydraulic drive 2 foot pedals for independant working on punching and section station bending unit with 2 dies, V40 and V70 flat steel stationWITH DEVICE FOR REDUCING DEFORMATION angle iron station with round and square bar cutting hydraulic downhold for flat- and angle station triangular notching station with table and gauge punching station with table and gauge gauge 1000 mm with contact switch, for angle / flat steel station operating manual in German and Englisch
            neu
            ca. 8 Wochen ab Auftragse
            Spanien
            34200 €
            694.26 €
            85 to
            500 mm
            5
            40/15 bzw. 24x24 mm
            450x15 / 450x18 mm
            475 mm
            130x130x13 mm
            45/40 mm
            12 mm
            200x12 mm
            9,2 kW
            2300 mm
            1200 mm
            2100 mm
            2400 kg
            Description :
            hydraulic drive
            2 foot pedals for independant working on punching and section station
            bending unit with 2 dies, V40 and V70
            flat steel stationWITH DEVICE FOR REDUCING DEFORMATION
            angle iron station with round and square bar cutting
            hydraulic downhold for flat- and angle station
            triangular notching station with table and gauge
            punching station with table and gauge
            gauge 1000 mm with contact switch, for angle / flat steel station
            operating manual in German and Englisch


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Section Steel Shear GEKA Bendicrop 60 SD

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-875 · Section Steel Shear

          GEKA - Bendicrop 60 SD - - -

          Technical details
          neu ︱ ca. 8 Wochen ab Auftragse ︱ Spanien ︱ 23500 €︱ 481.75 €︱ 60 to︱ 500 mm︱ 5 ︱ 2 ︱ 40x11 mm︱ 350x10 mm︱ 120x10 mm︱ 45/40 mm︱ 150x10 mm︱
          5 workstations foot pedal trigger hydr. drive flat steel shears incl. Device for reducing the deformation angle iron scissors with round and square bar opening triangle claw punching and bending device for flat iron table at the flat steel and notching station user manual in GERMAN and ENGLISH
            neu
            ca. 8 Wochen ab Auftragse
            Spanien
            23500 €
            481.75 €
            60 to
            500 mm
            5
            2
            40x11 mm
            350x10 mm
            120x10 mm
            45/40 mm
            150x10 mm
            Description :
            5 workstations
            foot pedal trigger
            hydr. drive
            flat steel shears incl. Device for reducing the deformation
            angle iron scissors with round and square bar opening
            triangle claw
            punching and bending device for flat iron
            table at the flat steel and notching station
            user manual in GERMAN and ENGLISH


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Section Steel Shear GEKA Minicrop

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-889 · Section Steel Shear

          GEKA - Minicrop - - -

          Technical details
          neu ︱ ca. 8 Wochen ab Auftragse ︱ Spanien ︱ 12400 €︱ 254.2 €︱ 45 to︱ 175 mm︱ 4 ︱ 27 x 12 mm︱ 15 mm︱ 16 1/min︱ 300x10 / 200x13 mm︱ 80x80x8 mm︱ 7 mm︱ 2,2 kW︱ 1360 mm︱ 1100 mm︱ 1500 mm︱ 800 kg︱
          4 working stations foot pedal hydraulically driven oil filled table at punching and notching station with gauge user manual in GERMAN and ENGLISH
            neu
            ca. 8 Wochen ab Auftragse
            Spanien
            12400 €
            254.2 €
            45 to
            175 mm
            4
            27 x 12 mm
            15 mm
            16 1/min
            300x10 / 200x13 mm
            80x80x8 mm
            7 mm
            2,2 kW
            1360 mm
            1100 mm
            1500 mm
            800 kg
            Description :
            4 working stations
            foot pedal
            hydraulically driven
            oil filled
            table at punching and notching station with gauge
            user manual in GERMAN and ENGLISH


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Section Steel Shear GEKA Bendicrop 60 S

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1506 · Section Steel Shear

          GEKA - Bendicrop 60 S - - -

          Technical details
          neu ︱ ca. 10 Wochen ab Auftrags ︱ Spanien ︱ 21200 €︱ 434.6 €︱ 1 ︱ 60 to︱ 250 mm︱ 5 ︱ 40 x 11 mm︱ 32 1/min︱ 350 x 15 mm︱ 120 x 10 mm︱ 45 / 40 mm︱ 10 mm︱ max. 150x10 mm︱ 5.5 kW︱ 1850 mm︱ 1300 mm︱ 2100 mm︱
          with bending station 5 working stations flat steel shear with device to reduce deformation angle iron shear with round- and squarebars opening triangle notcher punching station press brake device for flat steel table at flat steel station table at notching station length stop 1000 mm with contact switch, for angle, flat or bar station hydraulic drive 2 foot release user manual in GERMAN and ENGLISH WE HAVE MORE THAN 700 REFERENCES!
            neu
            ca. 10 Wochen ab Auftrags
            Spanien
            21200 €
            434.6 €
            1
            60 to
            250 mm
            5
            40 x 11 mm
            32 1/min
            350 x 15 mm
            120 x 10 mm
            45 / 40 mm
            10 mm
            max. 150x10 mm
            5.5 kW
            1850 mm
            1300 mm
            2100 mm
            Description :
            with bending station
            5 working stations
            flat steel shear with device to reduce deformation
            angle iron shear with round- and squarebars opening
            triangle notcher
            punching station
            press brake device for flat steel
            table at flat steel station
            table at notching station
            length stop 1000 mm with contact switch, for angle, flat or bar station
            hydraulic drive
            2 foot release
            user manual in GERMAN and ENGLISH

            WE HAVE MORE THAN 700 REFERENCES!


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Section Steel Shear GEKA Bendicrop 130 SD

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-2165 · Section Steel Shear

          GEKA - Bendicrop 130 SD - - -

          Technical details
          neu ︱ ca. 8 Wochen ab Auftragse ︱ Spanien ︱ 47200 €︱ 958.16 €︱ 130 to︱ 600 mm︱ 5 ︱ 2 ︱ 50x18 mm︱ 80 mm︱ 600x18 (max. 600x20 mit D mm︱ 120x120x11 (max. 150x150x mm︱ 45/40 mm︱ 130x12 mm︱ 250x12 mm︱ 15 kW︱
          hydraulic drive 2 foot pedals for independant working on punching and section station bending unit with 2 dies, V50 and V90 flat steel stationWITH DEVICE FOR REDUCING DEFORMATION angle iron station with round and square bar cutting triangular notching station with table and gauge punching station with table and gauge gauge 1000 mm with contact switch, for angle / flat steel station operating manual in German and Englisch
            neu
            ca. 8 Wochen ab Auftragse
            Spanien
            47200 €
            958.16 €
            130 to
            600 mm
            5
            2
            50x18 mm
            80 mm
            600x18 (max. 600x20 mit D mm
            120x120x11 (max. 150x150x mm
            45/40 mm
            130x12 mm
            250x12 mm
            15 kW
            Description :
            hydraulic drive
            2 foot pedals for independant working on punching and section station
            bending unit with 2 dies, V50 and V90
            flat steel stationWITH DEVICE FOR REDUCING DEFORMATION
            angle iron station with round and square bar cutting
            triangular notching station with table and gauge
            punching station with table and gauge
            gauge 1000 mm with contact switch, for angle / flat steel station
            operating manual in German and Englisch


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          •   
          •   
            •
          TOP Manufacturer:

          GEKA - PEDDINGHAUS - KINGSLAND - HUVEMA - WMW - ERMAK -

          Compendium
          Software
          Used machines content
          Privacy
          Follow us
          ©2000 - 2024, Logotech oHG · Software- and Internet Services - All rights reserved