Coil Line
Machinelist: Coil Line
Coil Line
- EnTeHa GmbH & Co.KG
- Im Wollenklingen 6
- 69517 Gorxheimertal
- Deutschland
-
+49 6201 2630 545
-
info@enteha.de
www.enteha.de
#2081-0843 · Coil Line
IRON / RDI Group - CRM-20 - - unbekannt -
Technical details
Coil - Durchlauf / Blechvorschub Drive: 2,2
- Frech GmbH
- Werderstr. 82
- 74889 Sinsheim
- Deutschland
-
0049-7261-1011
0049-7261-63966 -
info@frech-maschinen.de
www.frech-maschinen.de
#1073-60165 · Coil Line
HS-AUTOMATION - MS 4000 / MR 58 - - 2009 -
Technical details
Decoiler type MS 4000 - Hydraulic spreading - Hydraulic pressure roller from above - Swivel-in limit roller at the front, contact disc at the rear - Auxiliary drive - Reel movable - Coil lifting table Straightening machine type MR 58 Rollers hardened and ground. - Pneumatically ventilated feed roller - Straightening rollers adjustable as a block - Lateral belt guidance at the inlet - Hydraulic band insertion aid - Straightening head can be opened - Large roll basket and transfer table at the outlet - Ultrasonic transmitter for loop control - Swivel control panel - Control Siemens S7
- Frech GmbH
- Werderstr. 82
- 74889 Sinsheim
- Deutschland
-
0049-7261-1011
0049-7261-63966 -
info@frech-maschinen.de
www.frech-maschinen.de
#1073-60174 · Coil Line
ARKU - AH 3000/2/250/ST / RM 3025.4/2 - - 2004 -
Technical details
Decoiler AH 3000/2/250/ST with continuously variable drive, hydraulic central spread, Automatic post-spreading system, hydraulic pressure device, hydraulic swivel, Straightening machine RM 3025.4/21 with continuously variable drive, driven straightening rollers, manual Roller mill adjustment, quick-change device for the straightening rollers Belt loop control via ultrasound Material thickness / with material width 3.80 / 250 mm Material thickness / with material width 6.00 / 100 mm
- Frech GmbH
- Werderstr. 82
- 74889 Sinsheim
- Deutschland
-
0049-7261-1011
0049-7261-63966 -
info@frech-maschinen.de
www.frech-maschinen.de
#1073-60157 · Coil Line
DREHER - 1676D-FQ/2380 D-FPS - - 1999/97/2012 Umbau -
Technical details
Control conversion to SIEMENS S7 in 2012 - pneumatic pressure roller on the side - pneumatically ventilated feed roller - Straightening rollers manually adjustable - lateral belt guide at the inlet - Large roller basket at the outlet - Ultrasonic transmitter for loop control - Roller feed type 1125 D - Bandwidth max. 510 mm - Band thickness max. 6 mm with full width 5.50 mm - Roll diameter 125mm - Feed speed: max. 100 m/min. - pneumatically ventilated top roller - Lateral tape guide with digital display - Inlet roller basket
- Maschinen Schwartpaul GmbH
- Am Wasserwerk 1
- 58840 Plettenberg
- Deutschland
-
+49 (0)2391-95960
+49 (0)2391-959620 -
info@maschinen-schwartpaul.de
www.maschinen-schwartpaul.de
#2020-15438 · Coil Line
AMT - AHR 1,5 - - 1999 -
Technical details
Datasheet
Request / Contact
- Frech GmbH
- Werderstr. 82
- 74889 Sinsheim
- Deutschland
-
0049-7261-1011
0049-7261-63966 -
info@frech-maschinen.de
www.frech-maschinen.de
#1073-60167 · Coil Line
KOHLER - 30.400/9-2000.2H - - 1995 -
Technical details
- straightening machine type KRE 30.400/9 with infinitely variable drive, motoric adjustment of the roller cassette, rapid clamping device - double decoiler type 2000.2 H with pneumatic lag brake, hydraulic expansion, hydraulic snubber roll - coil loop control via ultrasound
- Frech GmbH
- Werderstr. 82
- 74889 Sinsheim
- Deutschland
-
0049-7261-1011
0049-7261-63966 -
info@frech-maschinen.de
www.frech-maschinen.de
#1073-60173 · Coil Line
COVEMA/SCHWABE - VRMA32/96-MHM 2 - - 1994 -
Technical details
COVEMA-SCHWABE belt system consisting of: Reel MHM 2 - hydraulic expansion (motor 1.5kW/1500 U) - hydraulic pressure roller - with drive Feed leveling machine VRMA 32/96 The straightening head can be opened using hydraulics Intermediate ventilation with operating instructions with control panel
- Frech GmbH
- Werderstr. 82
- 74889 Sinsheim
- Deutschland
-
0049-7261-1011
0049-7261-63966 -
info@frech-maschinen.de
www.frech-maschinen.de
#1073-60163 · Coil Line
KOHLER - 18.260.19-1000.2 - - 1991/2023CHECK -
Technical details
- Speed control ultrasonic via belt loop - Digital measuring device - Motorized roller mill adjustment - Drive motor 8 kW - Hydraulic reel expansion - Pneumatic reel brake - Quick change device for the straightening rollers and support rollers - SIEMENS S5 control - Press inlet height 1200-1400 mm - Electrical plans in the control cabinet - Instruction manual available Dimensions: - Straightener with reel 3.00 x 1.80 x 2.10 m - Tape guide 1.50 x 0.50 x 1.40 m - Control cabinet 0.90 x 0.60 x 2.10 m The system is energized and can be tested with material.
- Pressen HAAS GmbH
- Kreuzsteig 6
- 72479 Straßberg
- Deutschland
-
+49 7574 59 97 59
+49 7574 92 17 24 -
info@pressen-haas.de
www.pressen-haas.de
#2053-0346 · Coil Line
WANZKE - HRS 500/2500 - - 1990 -
Technical details
- Ambold Pressen GmbH
- Sommeritzer Straße 43
- 04626 Schmölln
- Deutschland
-
+49 (0)3449183314
+49 (0)3449123492 -
info@ambold-pressen.de
www.ambold-pressen.de
#1010-633 · Coil Line
KOHLER - 150.2/150.1 - - 1989 -
Technical details
-Coil rewinding system with 3 single coils decoiler, type 150.2: -Spool width: 140mm -Spreading: manual bolt spreading -Spool outer diameter: 800 mm -Brake: disc brake pneu. -Side shift: manually via spindle winding reel, type 150.1: -Brake: engine brake -Side shift: manual via spindle
- Frech GmbH
- Werderstr. 82
- 74889 Sinsheim
- Deutschland
-
0049-7261-1011
0049-7261-63966 -
info@frech-maschinen.de
www.frech-maschinen.de
#1073-60159 · Coil Line
KOHLER - 10 120 - 300.2 - - 1979 -
Technical details
- Reel and straightener as a combination with a common frame - Manually adjustable reel brake - Coil limiting ring at the front, fixed washer at the rear - Reel can be moved manually laterally - manual reel spreading - side belt – guide rollers with central adjustment at the inlet - manual block adjustment of the straightening mechanism, display via dial gauges - Oil - central lubrication - Loop control via sensor - Speed adjustable via potentiometer - Manually adjustable hold-down roller at the inlet - Large roller basket with cover on the outlet - Free-standing control panel - Lateral adjustment of the reel using a hand crank
- Frech GmbH
- Werderstr. 82
- 74889 Sinsheim
- Deutschland
-
0049-7261-1011
0049-7261-63966 -
info@frech-maschinen.de
www.frech-maschinen.de
#1073-60158 · Coil Line
KOHLER - 12 120 -150.2 - - 1979 -
Technical details
- Reel and straightener as a combination with a common frame - Manually adjustable reel brake - Coil limiting ring at the front, fixed washer at the rear - Reel can be moved manually laterally - manual reel spreading - side belt – guide rollers with central adjustment at the inlet - manual block adjustment of the straightening mechanism, display via dial gauges - Oil - central lubrication - Loop control via sensor - Speed adjustable via potentiometer - Belt support at the outlet - Free-standing control panel - Lateral adjustment of the reel using a hand crank - Belt support at the outlet
Plate Bending Machine - 3 Rolls
- Kurt Steiger Werkzeugmaschinen GmbH
- Flachstr. 11
- 65197 Wiesbaden
- Deutschland
-
+49 (0) 611/421047
+49 (0) 611/421040 -
info@kurt-steiger.de
www.kurt-steiger.de
#2043-19334 · Plate Bending Machine - 3 Rolls
AKYAPAK - 1030 x 70 - - 1998 -
Technical details
working width: 1050 mm
metal sheet thickness: 1,5 mm
upper roller-Ø: 70 mm
below roller-Ø: 70 mm
Njw93ychg
weight: 320 kg
space needed: 700 x 1300 x 1100 mm
Datasheet
Request / Contact
- Kurt Steiger Werkzeugmaschinen GmbH
- Flachstr. 11
- 65197 Wiesbaden
- Deutschland
-
+49 (0) 611/421047
+49 (0) 611/421040 -
info@kurt-steiger.de
www.kurt-steiger.de
#2043-18062 · Plate Bending Machine - 3 Rolls
DURMAZLAR - KSM 56 - - 1996 -
Technical details
working width: 1030 mm
metal sheet thickness: 1 mm
upper roller-Ø: 60 mm
below roller-Ø: 60 mm
Zxy8p9m
weight: 170 kg
space needed: 560 x 1570 x 1080 mm
Datasheet
Request / Contact
- Kurt Steiger Werkzeugmaschinen GmbH
- Flachstr. 11
- 65197 Wiesbaden
- Deutschland
-
+49 (0) 611/421047
+49 (0) 611/421040 -
info@kurt-steiger.de
www.kurt-steiger.de
#2043-18062 · Plate Bending Machine - 3 Rolls
DURMAZLAR - KSM 56 - - 1996 -
Technical details
working width: 1030 mm
Iw8bipcy0
metal sheet thickness: 1 mm
upper roller-Ø: 60 mm
below roller-Ø: 60 mm
weight: 170 kg
space needed: 560 x 1570 x 1080 mm
Datasheet
Request / Contact
- Knops Werkzeugmaschinen
- Konrad-Zuse-Straße 5
- 40789 Monheim
- Deutschland
-
02173 - 39494-0
02173 - 39494-29 -
maschinen@knops.de
www.knops.de
#1022-H06661 · Plate Bending Machine - 3 Rolls
SCHAEFER - SRMVQ - - 1975 -
Technical details
Machine in good condition. PREBENDING DOUBLE . Maximum bending length 3.000 mm . Bending capacity 40 mm . Prebending capacity 30 mm . Top roll diameter 590 mm . Bending rolls diameter 490 mm . Main motor 45 kW . Bending motor 30 kW . Digital readout in all axis . Approximate weight 45 t . Approximate dimenssion.: . Length: 8.400 mm . Width: 2.600 mm . Height: 3.700 mm . Trench height: 1.780 mm
- Kurt Steiger Werkzeugmaschinen GmbH
- Flachstr. 11
- 65197 Wiesbaden
- Deutschland
-
+49 (0) 611/421047
+49 (0) 611/421040 -
info@kurt-steiger.de
www.kurt-steiger.de
#2043-26672 · Plate Bending Machine - 3 Rolls
unbekannt - unbekannt - - -
Technical details
working width: 1040 mm
Lp20uvs
metal sheet thickness: 1,25 mm
upper roller-Ø: 56 mm
below roller-Ø: 56 mm
weight: 190 kg
space needed: 1450 x 460 x 1030 mm
Datasheet
Request / Contact
- Kurt Steiger Werkzeugmaschinen GmbH
- Flachstr. 11
- 65197 Wiesbaden
- Deutschland
-
+49 (0) 611/421047
+49 (0) 611/421040 -
info@kurt-steiger.de
www.kurt-steiger.de
#2043-26395 · Plate Bending Machine - 3 Rolls
unbekannt - unbekannt - - -
Technical details
working width: 1020 mm
32qxc3xgp
metal sheet thickness: 1 mm
upper roller-Ø: 55 mm
below roller-Ø: 55 mm
space needed: 1370 x 570 x 1100 mm
Datasheet
Request / Contact
- HESSE+CO Maschinenfabrik GesmbH
- Straße 4 Objekt 8
- 2351 Wiener Neudorf
- Österreich
-
+43/2236/638 70-0
+43/2236/636 62 -
office@hesse-maschinen.com
https://www.hesse-maschinen.com
#1069-224 · Plate Bending Machine - 3 Rolls
HESSE by ISITAN - R 1270 x 68 - - -
Technical details
3 Walzen asymmetric rolls - prebending longitudinal grooves in lower and lateral roll Infeed of the lower roller by a central lever - with gear reduction machine stand user manual in GERMAN orENGLISH
Datasheet
Request / Contact
- HESSE+CO Maschinenfabrik GesmbH
- Straße 4 Objekt 8
- 2351 Wiener Neudorf
- Österreich
-
+43/2236/638 70-0
+43/2236/636 62 -
office@hesse-maschinen.com
https://www.hesse-maschinen.com
#1069-217 · Plate Bending Machine - 3 Rolls
HESSE by ISITAN - RM 1050 x 90 - - -
Technical details
3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch conical rolling device user manual in GERMAN
Datasheet
Request / Contact
- HESSE+CO Maschinenfabrik GesmbH
- Straße 4 Objekt 8
- 2351 Wiener Neudorf
- Österreich
-
+43/2236/638 70-0
+43/2236/636 62 -
office@hesse-maschinen.com
https://www.hesse-maschinen.com
#1069-49 · Plate Bending Machine - 3 Rolls
HESSE by ISITAN - IRM 1050 x 130 - - -
Technical details
3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS: hardened Rolls€ 1.250,- Motorised Back Roll (Power Rear Roll)€ 1.200,- Digital Read-Out€ 1.200,-
Datasheet
Request / Contact
- HESSE+CO Maschinenfabrik GesmbH
- Straße 4 Objekt 8
- 2351 Wiener Neudorf
- Österreich
-
+43/2236/638 70-0
+43/2236/636 62 -
office@hesse-maschinen.com
https://www.hesse-maschinen.com
#1069-211 · Plate Bending Machine - 3 Rolls
HESSE by ISITAN - IRM 1270 x 140 - - -
Technical details
3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS: hardened Rolls€ 1.500,- Motorised Back Roll (Power Rear Roll)€ 1.200,- Digital Read-Out€ 1.200,-
Datasheet
Request / Contact
- HESSE+CO Maschinenfabrik GesmbH
- Straße 4 Objekt 8
- 2351 Wiener Neudorf
- Österreich
-
+43/2236/638 70-0
+43/2236/636 62 -
office@hesse-maschinen.com
https://www.hesse-maschinen.com
#1069-1459 · Plate Bending Machine - 3 Rolls
HESSE by ISITAN - IRM 2050 x 140 - - -
Technical details
3 reels asymmetrical roller arrangement - with pre-bending 2 driven rollers by means of a brake motor manual Back Roll upper roller can be swiveled forward forward / reverse run conical rounding by inclining the rear rollers movable control panel OPTIONS: hardened Rolls€ 1.800,- Motorised Back Roll (Power Rear Roll)€ 1.200,- Digital Read-Out€ 1.200,- (sample photo)
Datasheet
Request / Contact
- HESSE+CO Maschinenfabrik GesmbH
- Straße 4 Objekt 8
- 2351 Wiener Neudorf
- Österreich
-
+43/2236/638 70-0
+43/2236/636 62 -
office@hesse-maschinen.com
https://www.hesse-maschinen.com
#1069-294 · Plate Bending Machine - 3 Rolls
HESSE by DURMA - MRB-S 3006 - - -
Technical details
3 rolls Asymmetrical rolls arrangement - with pre-bending 2 driven rolls Motorized adjustment of lateral and clamping roll Digital read-out for lateral and clamping roll Swiveling top roll to the front Forward/reverse run Hardened rolls Moveable control panel User manual in GERMAN and ENGLISH (sample photo)
Datasheet
Request / Contact
TOP Manufacturer:
KOHLER - DREHER - IRON / RDI GROUP - ARKU - HS-AUTOMATION - COVEMA/SCHWABE -