European network of stockholding machinery dealers

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:

          Cut-to-length-lines

          Machinelist: Cut-to-length-lines


          Cut-to-length-lines

          used Sheet metal working / shaeres / bending Cut-to-length-lines VIGANO/RIVA


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-056810 · Cut-to-length-lines

          VIGANO/RIVA - - - 2000/2001 -

          Technical details
          Material Width 2.000 mm︱Material Thickness 1,50 - (5,00)6,00 mm︱Coil Weight max. 30,0 t︱Coil Inside Diameter 580 mm︱Coil Outside Diameter 1.250/1.500 mm︱
          sheet length 580 - 6.000 mm working direction left - right otherwise according to technical specification 05.68-1.0
            Material Width 2.000 mm
            Material Thickness 1,50 - (5,00)6,00 mm
            Coil Weight max. 30,0 t
            Coil Inside Diameter 580 mm
            Coil Outside Diameter 1.250/1.500 mm
            Description :
            sheet length 580 - 6.000 mm
            working direction left - right

            otherwise according to technical specification 05.68-1.0


        • SCHMITT REINHOLD GMBH
        • Obernahmerstr. 74
        • 58119 Hagen-Hohenlimburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Cut-to-length-lines HITACHI


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19439 · Cut-to-length-lines

          HITACHI - - - 1993 -

          Technical details
          sheet width 500 - 1350 mm︱plate thickness 0,3 - 3 mm︱no. of strokes Hub/min︱Control ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Stainless steel Cut to Length Line(Flying type) - Material: stainless steel, surface treated steel -- Thickness: 0.3–3 mm (as of stainless steel) -- Width: 500-1350 mm -- Trim: 5-25 mm on one side (more than twice the plate thickness) - Material coil: internal diameter 508 mm, external diameter 600–1800 mm -- weight maximum 15 tons -- Width accuracy: 500–1350 mm plus or minus 0.2 mm (when side trimming) -- Product length: 400–6000 mm Plus/minus 0.3 mm - 6-leveler (6-hi) leveler x 2units types -- Tension: 45 to 50 kg/mm2 -- Yield point: 28 kg/mm2 - Cutting method: Cut while running (flying), numerically controlled rocking type - flying shears -- (Cutting speed) 20–40/80 m/min -- Speed 2-speed change type --- 0.3 to 1.2 mm: 20 to 80 m/min --- 0.21–3 mm: 20–40 m/min -- Slow operation: 0.8 m/min -- Conveyor speed: 20~120m/min -- Cut count: up to 150 cuts/min -- (Product piling) --- Plate width: 500–1350 mm --- No1 piler: 400 to 3100 mm (also used as a reject filer) --- No2 piler: 400–6100 mm --- Load height: up to 600mm --- Load weight: up to 4 tons Line direction: From right to left on control panel Line: Approximately 13 m x 49.050 m (Major facilities) - Coil skid - Coil car - Pay off reel and a paper winder - Coil opener - Rough Leveler - Shear - No. 1 Looper Guide - Side guide and pinch roller - Side trimmer - Scrap winder x2 - No.1 Finisher Leveler (6-hi) - No2 Finisher Leveler (6-hi) - No 2 Looper Guide - Measuring roller, feed roller and paper-off reel - Shear - Conveyor - Cart - No1/No2 piler type - Hydraulic unit: Type - Valve stand type - (Coil skid) -- V-type fixed skid -- Coil maintenance: 1 coil -- Coil weight: up to 15 tonnes -- Coil diameter: 600 to 1800 mm -urethane rubber (Coil Car) Cradle roller type Hydraulic boost Electricity transfer driving type Two guide lots hydraulic cylinder elevating type (payoff reel and paper winder) Overhang, single-mant 4-segment type Paper reel motor: DC 5.5KW 400/1600 RPM, attached to brake Paper winder: cone type, (motor DC 1.5KW, 1750 RPM) (Coil Opener) Knife edge method (Rough Leveler) 2-stage (2hi) 5-body roller leveler Pinch rollers: 160 mm × 1450 mm 2 pieces, The upper part of the pinch roller is hydraulic cylinder press-down, and the lower roller is fixed 5 workload rollers 130mm x 1450mm The upper roller of the workload roller is electrically pressed, and the lower roller is fixed 0–40/80 m/min Two-stage change 0.3 to 1.6 mmt: 80 m/min 1.7 to 1.6 mmt: 40 m/min Motor: DC 18.5 KW, 1750 RPM, Brake Attachment Pressing motor: 2 1.5KW 100RPMs with brakes (Shear) Hydraulic up cut shear Knife size: 25 mm thickness × 150 mm width × 1450 mm length (No. 1 Looper Guide) Table lift Hydraulic cylinder operation method Loop: Light Volume Control Method Roller: 70 mm diameter × 1450 mm × 6 bonds, rubber lining roller (Side guide and pinch roller) Vertical Free Roller Electrically switched type Side guide roller: 90 mm diameter × 150 mm length × 6 bones Pinch Roller: 2nd Stage (2hi) Roller: 160 mm diameter × 1450 mm length × 2 bones Upper roller: pneumatic cylinder pressure free roller Lower Roller: Fixed Drive Roller (Side trimmer) Overhang Drive Cut 0–40/80 m/min 2-stage change type 0.3 to 1.6 mmt: 80 m/min 1.7 to 1.6 mmt: 40 m/min Cutter diameter: 320 mm / 190 mm internal diameter × 20 mm thickness Roller: 320 mm external diameter × 19 mm internal diameter × 20 mm thickness Motor: DC 5.5KW 1750RPM (Scrap winder) Two machines Link Pin Gauge Type (Hydraulic Cylinder Opening and Closing Type) Motor: 2 DC 2.2KW 1450 RPM (No1 Finisher Leveler) 6-level (6-hi) 17 leveler Thickness: 1.21–3.0 mm Speed: 6 to 40/80 m/min Thickness 0.3–1.2 mm 6–80 m/min Thickness 1.21–3 mm 6–40 m/min Pinch roller: 180 mm × 1750 mm × 2 bones The upper roll is a pneumatic cylinder. The lower roll is fixed Rubber lining drive roller Work roll: 60mm x 1750mm x 17e 8 for the upper roll, 9 for the lower roll Plated abrasive roller Medium roller: 50 mm × 1750 mm × 19 pieces 9 for the upper roll, 10 for the bottom roll Backup Roller: 88 mm Diameter x 50 mm Length x 7 rows Pressing Method: Lower Roller Parallel Pressing Pressing speed: 0.25 mm/sec Pressurization: plus or minus 5 mm Motor: DC 55KW 1750 RPM Brake Attachment (No2 Finisher Leveler) 6-level (6-hi) 17 leveler Plate thickness: 0.3–1.2 mm Speed: 5 to 80 m/min Pinch roller: 180 mm × 1750 mm × 2 bones The upper roll is a pneumatic cylinder. The lower roll is fixed Rubber lining drive roller Work roll: 35mm x 1750mm x 17bon 8 for the upper roll, 9 for the lower roll Plated abrasive roller Medium Roller: 32 mm × 1750 mm × 19 pieces 9 for the upper roll, 10 for the bottom roll Backup Roller: 99 mm Diameter x 50 mm Length x 7 rows Roller bearing type Pressing Method: Lower Roller Parallel Pressing Pressing speed: 0.25 mm/sec Pressurization: plus or minus 5 mm Motor: DC 35KW 1750RPM Brake Attachment (No. 2 Looper Guide) Table lift Hydraulic cylinder operation method Loop: How to control the amount of light (amount of light) Roller: 70 mm diameter × 1450 mm × 6 bonds, rubber lining roller (Measuring roll/feed roller/paper vinyl payoff reel) Measuring roller: The upper roll is pneumatic pressing, the lower roll is fixed, the pressing amount is 30 mm Feed roller: Upper roll is pneumatic cylinder press, lower roll is fixed, press load is 40 mm Motor: DC 2.2KW 1750RPM (Shear) Fluctuating Flying shear 0.3~3mm Speed: 2 groups of 20–40/80 m/min Thickness 0.3–1.6 mm 80 m/min Tlate thickness 1.6–3 mm 40 m/min Cut count: up to 150 cuts/min Cutting length: 400–6000 mm Electric up CUT shear Cut up and down knife die via motor, reducer, pinion stand crankshaft Knife: 20 mmt × 80 mm × 1400 mm × 1 set The top knife is a straight knife, and the bottom is a V-lock knife Adjustment: Wedge Motor: DC 75KW 550RPM (Conveyor) Belt conveyor type Belt width: 1200 mm Conveyor length: 3800 mm Motor DC 5.5KW 1450RPM Brake Attachment (No. 1 No. 2 piler) No1 piler: Combined use of reject truck, air blower Combined use of side conveyor No2 piler: Combined suction conveyor and air blower Loading height: 600 mm Lift: Hydraulic lift volume 650 mm Motor: 4 1.5KW 150RPM units for side guide end stoppers 2.2 KW 1500RPM for lifters 1.5KW for cart 7.5KW for blower (Hydraulic device) 70 kg/cm2 × 100 L/min Pen pump Motor: DC 18.5 KW 1000 RPM (Supply power) AC400 V,50 Hertz 3 Phase / AC200 V,50 Hertz 3 Phase (Control power) AC 200V, 50 Hz Single Phase (Compressed air) Compressed air required: 5 kg/cm2
            sheet width 500 - 1350 mm
            plate thickness 0,3 - 3 mm
            Description :
            Stainless steel Cut to Length Line(Flying type)

            - Material: stainless steel, surface treated steel
            -- Thickness: 0.3–3 mm (as of stainless steel)
            -- Width: 500-1350 mm
            -- Trim: 5-25 mm on one side (more than twice the plate thickness)
            - Material coil: internal diameter 508 mm, external diameter 600–1800 mm
            -- weight maximum 15 tons
            -- Width accuracy: 500–1350 mm plus or minus 0.2 mm (when side trimming)
            -- Product length: 400–6000 mm Plus/minus 0.3 mm

            - 6-leveler (6-hi) leveler x 2units types
            -- Tension: 45 to 50 kg/mm2
            -- Yield point: 28 kg/mm2
            - Cutting method: Cut while running (flying), numerically controlled rocking
            type

            - flying shears
            -- (Cutting speed) 20–40/80 m/min
            -- Speed 2-speed change type
            --- 0.3 to 1.2 mm: 20 to 80 m/min
            --- 0.21–3 mm: 20–40 m/min
            -- Slow operation: 0.8 m/min
            -- Conveyor speed: 20~120m/min
            -- Cut count: up to 150 cuts/min
            -- (Product piling)
            --- Plate width: 500–1350 mm
            --- No1 piler: 400 to 3100 mm (also used as a reject filer)
            --- No2 piler: 400–6100 mm
            --- Load height: up to 600mm
            --- Load weight: up to 4 tons

            Line direction: From right to left on control panel
            Line: Approximately 13 m x 49.050 m
            (Major facilities)
            - Coil skid
            - Coil car
            - Pay off reel and a paper winder
            - Coil opener
            - Rough Leveler
            - Shear
            - No. 1 Looper Guide
            - Side guide and pinch roller
            - Side trimmer
            - Scrap winder x2
            - No.1 Finisher Leveler (6-hi)
            - No2 Finisher Leveler (6-hi)
            - No 2 Looper Guide
            - Measuring roller, feed roller and paper-off reel
            - Shear
            - Conveyor
            - Cart
            - No1/No2 piler type
            - Hydraulic unit: Type
            - Valve stand type
            - (Coil skid)
            -- V-type fixed skid
            -- Coil maintenance: 1 coil
            -- Coil weight: up to 15 tonnes
            -- Coil diameter: 600 to 1800 mm
            -urethane rubber
            (Coil Car)
            Cradle roller type
            Hydraulic boost
            Electricity transfer driving type
            Two guide lots hydraulic cylinder elevating type
            (payoff reel and paper winder)
            Overhang, single-mant 4-segment type
            Paper reel motor: DC 5.5KW 400/1600 RPM, attached to brake
            Paper winder: cone type, (motor DC 1.5KW, 1750 RPM)
            (Coil Opener)
            Knife edge method
            (Rough Leveler)
            2-stage (2hi) 5-body roller leveler
            Pinch rollers: 160 mm × 1450 mm 2 pieces,
            The upper part of the pinch roller is hydraulic cylinder press-down, and the
            lower roller is fixed
            5 workload rollers 130mm x 1450mm
            The upper roller of the workload roller is electrically pressed, and the lower
            roller is fixed
            0–40/80 m/min
            Two-stage change
            0.3 to 1.6 mmt: 80 m/min
            1.7 to 1.6 mmt: 40 m/min
            Motor: DC 18.5 KW, 1750 RPM, Brake Attachment
            Pressing motor: 2 1.5KW 100RPMs with brakes
            (Shear)
            Hydraulic up cut shear
            Knife size: 25 mm thickness × 150 mm width × 1450 mm length
            (No. 1 Looper Guide)
            Table lift
            Hydraulic cylinder operation method
            Loop: Light Volume Control Method
            Roller: 70 mm diameter × 1450 mm × 6 bonds, rubber lining roller
            (Side guide and pinch roller)
            Vertical Free Roller
            Electrically switched type
            Side guide roller: 90 mm diameter × 150 mm length × 6 bones
            Pinch Roller: 2nd Stage (2hi)
            Roller: 160 mm diameter × 1450 mm length × 2 bones
            Upper roller: pneumatic cylinder pressure free roller
            Lower Roller: Fixed Drive Roller
            (Side trimmer)
            Overhang Drive Cut
            0–40/80 m/min 2-stage change type
            0.3 to 1.6 mmt: 80 m/min
            1.7 to 1.6 mmt: 40 m/min
            Cutter diameter: 320 mm / 190 mm internal diameter × 20 mm thickness
            Roller: 320 mm external diameter × 19 mm internal diameter × 20 mm thickness
            Motor: DC 5.5KW 1750RPM
            (Scrap winder)
            Two machines
            Link Pin Gauge Type (Hydraulic Cylinder Opening and Closing Type)
            Motor: 2 DC 2.2KW 1450 RPM
            (No1 Finisher Leveler)
            6-level (6-hi) 17 leveler
            Thickness: 1.21–3.0 mm
            Speed: 6 to 40/80 m/min
            Thickness 0.3–1.2 mm 6–80 m/min
            Thickness 1.21–3 mm 6–40 m/min
            Pinch roller: 180 mm × 1750 mm × 2 bones
            The upper roll is a pneumatic cylinder. The lower roll is fixed
            Rubber lining drive roller
            Work roll: 60mm x 1750mm x 17e
            8 for the upper roll, 9 for the lower roll
            Plated abrasive roller
            Medium roller: 50 mm × 1750 mm × 19 pieces
            9 for the upper roll, 10 for the bottom roll
            Backup Roller: 88 mm Diameter x 50 mm Length x 7 rows
            Pressing Method: Lower Roller Parallel Pressing
            Pressing speed: 0.25 mm/sec
            Pressurization: plus or minus 5 mm
            Motor: DC 55KW 1750 RPM Brake Attachment
            (No2 Finisher Leveler)
            6-level (6-hi) 17 leveler
            Plate thickness: 0.3–1.2 mm
            Speed: 5 to 80 m/min
            Pinch roller: 180 mm × 1750 mm × 2 bones
            The upper roll is a pneumatic cylinder. The lower roll is fixed
            Rubber lining drive roller
            Work roll: 35mm x 1750mm x 17bon
            8 for the upper roll, 9 for the lower roll
            Plated abrasive roller
            Medium Roller: 32 mm × 1750 mm × 19 pieces
            9 for the upper roll, 10 for the bottom roll
            Backup Roller: 99 mm Diameter x 50 mm Length x 7 rows
            Roller bearing type
            Pressing Method: Lower Roller Parallel Pressing
            Pressing speed: 0.25 mm/sec
            Pressurization: plus or minus 5 mm
            Motor: DC 35KW 1750RPM Brake Attachment
            (No. 2 Looper Guide)
            Table lift
            Hydraulic cylinder operation method
            Loop: How to control the amount of light (amount of light)
            Roller: 70 mm diameter × 1450 mm × 6 bonds, rubber lining roller
            (Measuring roll/feed roller/paper vinyl payoff reel)
            Measuring roller: The upper roll is pneumatic pressing, the lower roll is
            fixed, the pressing amount is 30 mm
            Feed roller: Upper roll is pneumatic cylinder press, lower roll is fixed, press
            load is 40 mm
            Motor: DC 2.2KW 1750RPM
            (Shear)
            Fluctuating Flying shear
            0.3~3mm
            Speed: 2 groups of 20–40/80 m/min
            Thickness 0.3–1.6 mm 80 m/min
            Tlate thickness 1.6–3 mm 40 m/min
            Cut count: up to 150 cuts/min
            Cutting length: 400–6000 mm
            Electric up CUT shear
            Cut up and down knife die via motor, reducer, pinion stand crankshaft
            Knife: 20 mmt × 80 mm × 1400 mm × 1 set
            The top knife is a straight knife, and the bottom is a V-lock knife
            Adjustment: Wedge
            Motor: DC 75KW 550RPM
            (Conveyor)
            Belt conveyor type
            Belt width: 1200 mm
            Conveyor length: 3800 mm
            Motor DC 5.5KW 1450RPM Brake Attachment
            (No. 1 No. 2 piler)
            No1 piler: Combined use of reject truck, air blower
            Combined use of side conveyor
            No2 piler: Combined suction conveyor and air blower
            Loading height: 600 mm
            Lift: Hydraulic lift volume 650 mm
            Motor: 4 1.5KW 150RPM units for side guide end stoppers
            2.2 KW 1500RPM for lifters
            1.5KW for cart
            7.5KW for blower
            (Hydraulic device)
            70 kg/cm2 × 100 L/min
            Pen pump
            Motor: DC 18.5 KW 1000 RPM
            (Supply power)
            AC400 V,50 Hertz 3 Phase / AC200 V,50 Hertz 3 Phase
            (Control power)
            AC 200V, 50 Hz Single Phase
            (Compressed air)
            Compressed air required: 5 kg/cm2



        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Cut-to-length-lines WILHELMSBURGER


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-056410 · Cut-to-length-lines

          WILHELMSBURGER - - - 1975 -

          Technical details
          Material Width 1.800 mm︱Material Thickness 0,50-1,50 mm︱Coil Weight 30,0 t︱Required Space app. m︱Machine Weight app. t︱
          length tolerance ± 0,5 mm width tolerance ± 0,5 mm diagonal tolerance ± 1,0 mm line consisting of: double side decoiler leveler no. of leveling rolls 21 leveling roll diameter 35 mm flying shear magnetic conveyor table - length 10 m 2 output tables electric pneumatic hydraulic
            Material Width 1.800 mm
            Material Thickness 0,50-1,50 mm
            Coil Weight 30,0 t
            Description :
            length tolerance ± 0,5 mm
            width tolerance ± 0,5 mm
            diagonal tolerance ± 1,0 mm

            line consisting of:
            double side decoiler
            leveler
            no. of leveling rolls 21
            leveling roll diameter 35 mm
            flying shear
            magnetic conveyor table - length 10 m
            2 output tables
            electric
            pneumatic
            hydraulic


        • SCHMITT REINHOLD GMBH
        • Obernahmerstr. 74
        • 58119 Hagen-Hohenlimburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Cut-to-length-lines Hydro Meca 90L4C108H


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-M825 · Cut-to-length-lines

          Hydro Meca - 90L4C108H - - -

          Technical details
          Capacity 26/34/42/48/60 mm ø︱Machine dimensions (lxwxh) - mm︱Machine weight - kg︱
          Pipe cutting machine
            Capacity 26/34/42/48/60 mm ø
            Machine dimensions (lxwxh) - mm
            Machine weight - kg
            Description :
            Pipe cutting machine


        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact

          Pipe-Bending Machine

          used Sheet metal working / shaeres / bending Pipe-Bending Machine MEWAG RB 60A


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3764 · Pipe-Bending Machine

          MEWAG - RB 60A - - unbekannt -

          Technical details
          tube diameter max 60 mm︱wall strength 3 mm︱bending capacity pipes 60 x 3 mm︱weight of the machine ca. 2000 kg︱dimensions of the machine ca. ca. 8000 x 1300 x 1200 mm︱
          including a lot of accessories 6 mandrels, mandrel extension length 6000 mm and various bending tools (see photos)
            tube diameter max 60 mm
            wall strength 3 mm
            bending capacity pipes 60 x 3 mm
            weight of the machine ca. 2000 kg
            dimensions of the machine ca. ca. 8000 x 1300 x 1200 mm
            Description :
            including a lot of accessories
            6 mandrels, mandrel extension length 6000 mm
            and various bending tools (see photos)


        • WeMa Antonius Pigge GmbH
        • Barnstorfer Str. 3
        • 49424 Goldenstedt
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Pipe-Bending Machine ERCOLINA MB42EDTP-T


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-10053 · Pipe-Bending Machine

          ERCOLINA - MB42EDTP-T - - Neu -

          Technical details
          R10-R260max. 210 °︱ 54x2 mm︱ 42x2,5 mm︱ 42x3,5 mm︱ 30 mm︱bending speed max. 4 U/min︱Amount of programms 30x9 ︱voltage dreiphasig 220-400 V︱total power requirement 1,1 kW︱dimensions of the machine ca. 1000 x 410 x 570 mm︱weight of the machine ca. 80 kg︱
          Accessories / equipment: - Machine structure: aluminum alloy - Base: welded steel - Standard accessories (including footswitch, operating instructions)
            R10-R260
            max. 210 °
            54x2 mm
            42x2,5 mm
            42x3,5 mm
            30 mm
            bending speed max. 4 U/min
            Amount of programms 30x9
            voltage dreiphasig 220-400 V
            total power requirement 1,1 kW
            dimensions of the machine ca. 1000 x 410 x 570 mm
            weight of the machine ca. 80 kg
            Description :
            Accessories / equipment:
            - Machine structure: aluminum alloy
            - Base: welded steel
            - Standard accessories (including footswitch, operating instructions)


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Pipe-Bending Machine ZOPF ZB 80/2 M


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4040338 · Pipe-Bending Machine

          ZOPF - ZB 80/2 M - - Neu -

          Technical details
          50 mm︱ 8,5 U/min︱ 100 kN︱roll diameter 162 mm︱Drive 1,5 kW︱range L-W-H 1100x800x1500 mm︱weight 450 kg︱
          Equipment / Accessories: - Two driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - Footswitch - standard roller set
            50 mm
            8,5 U/min
            100 kN
            roll diameter 162 mm
            Drive 1,5 kW
            range L-W-H 1100x800x1500 mm
            weight 450 kg
            Description :
            Equipment / Accessories:
            - Two driven rollers
            - Hydraulic delivery of the upper roller
            - Digital display with memory function
            - Working position horizontal and vertical
            - Bearings with tapered roller bearings
            - Use of replaceable slide rails on the guide carriage
            - Footswitch
            - standard roller set


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Pipe-Bending Machine ZOPF ZB 70/2M


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-10038 · Pipe-Bending Machine

          ZOPF - ZB 70/2M - - Neu -

          Technical details
          40 mm︱ 8,5 U/min︱ 120 mm︱roll diameter 152 / 162 mm︱engine output 1,1 kW︱connected load 400 V︱weight 395 kg︱Overall size 900x600x1100 mm︱
          Equipment / Accessories: - Two driven rollers - Manual delivery of the upper roller - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn different profiles are used
            40 mm
            8,5 U/min
            120 mm
            roll diameter 152 / 162 mm
            engine output 1,1 kW
            connected load 400 V
            weight 395 kg
            Overall size 900x600x1100 mm
            Description :
            Equipment / Accessories:
            - Two driven rollers
            - Manual delivery of the upper roller
            - Working position horizontal and vertical
            - Bearings with tapered roller bearings
            - Use of replaceable slide rails on the guide carriage
            - The standard roller set is included. He can turn
            different profiles are used


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Pipe-Bending Machine ZOPF ZB 70/3M ECO


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-9010097 · Pipe-Bending Machine

          ZOPF - ZB 70/3M ECO - - Neu -

          Technical details
          40 mm︱ 8,5 U/min︱ 120 mm︱roll diameter 152 / 162 mm︱engine output 1,1 kW︱range L-W-H 900 x 600 x 1000 mm︱weight 470 kg︱connected load 400/50 V/Hz︱
          Equipment / Accessories: - Three driven rollers - Manual delivery of the upper roller - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn used different profiles
            40 mm
            8,5 U/min
            120 mm
            roll diameter 152 / 162 mm
            engine output 1,1 kW
            range L-W-H 900 x 600 x 1000 mm
            weight 470 kg
            connected load 400/50 V/Hz
            Description :
            Equipment / Accessories:
            - Three driven rollers
            - Manual delivery of the upper roller
            - Working position horizontal and vertical
            - Bearings with tapered roller bearings
            - Use of replaceable slide rails on the guide carriage
            - The standard roller set is included. He can turn
            used different profiles


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Pipe-Bending Machine ZOPF ZB 70/2H


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4040220 · Pipe-Bending Machine

          ZOPF - ZB 70/2H - - Neu -

          Technical details
          40 mm︱ 8,5 U/min︱ 120 mm︱roll diameter 152 / 162 mm︱engine output 1,1 kW︱connected load 400/50 V/Hz︱hydraulic pump 1,1 kW︱ 80 kN︱range L-W-H 900 x 600 x 1000 mm︱weight 470 kg︱
          Equipment / Accessories: - Two driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn used different profiles
            40 mm
            8,5 U/min
            120 mm
            roll diameter 152 / 162 mm
            engine output 1,1 kW
            connected load 400/50 V/Hz
            hydraulic pump 1,1 kW
            80 kN
            range L-W-H 900 x 600 x 1000 mm
            weight 470 kg
            Description :
            Equipment / Accessories:
            - Two driven rollers
            - Hydraulic delivery of the upper roller
            - Digital display with memory function
            - Working position horizontal and vertical
            - Bearings with tapered roller bearings
            - Use of replaceable slide rails on the guide carriage
            - The standard roller set is included. He can turn
            used different profiles


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Pipe-Bending Machine ERCOLINA MB42 EDT-PLUS-M


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-9010101 · Pipe-Bending Machine

          ERCOLINA - MB42 EDT-PLUS-M - - NEU -

          Technical details
          R10-R260 ︱bending speed 2,5 U/min︱ 42x3 mm︱ 42x2,5 mm︱ 30 mm︱ 54x2 mm︱total power requirement 1,5 kW︱weight of the machine ca. 80 kg︱dimensions of the machine ca. 410x1000x570 mm︱
            R10-R260
            bending speed 2,5 U/min
            42x3 mm
            42x2,5 mm
            30 mm
            54x2 mm
            total power requirement 1,5 kW
            weight of the machine ca. 80 kg
            dimensions of the machine ca. 410x1000x570 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Pipe-Bending Machine ZOPF ZB 80/3 H Eco


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4040222 · Pipe-Bending Machine

          ZOPF - ZB 80/3 H Eco - - Neu -

          Technical details
          50 mm︱ 8,5 U/min︱ 100 kN︱roll diameter 162 mm︱Drive 1,5 kW︱weight 495 kg︱range L-W-H 1100x850x1100 mm︱
          Equipment / Accessories: - Three driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage
            50 mm
            8,5 U/min
            100 kN
            roll diameter 162 mm
            Drive 1,5 kW
            weight 495 kg
            range L-W-H 1100x850x1100 mm
            Description :
            Equipment / Accessories:
            - Three driven rollers
            - Hydraulic delivery of the upper roller
            - Digital display with memory function
            - Working position horizontal and vertical
            - Bearings with tapered roller bearings
            - Use of replaceable slide rails on the guide carriage


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Pipe-Bending Machine ZOPF ZB 110/3H


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-9010084 · Pipe-Bending Machine

          ZOPF - ZB 110/3H - - Neu -

          Technical details
          80 mm︱roll diameter 260 mm︱ 7 U/min︱ 170 mm︱ 27 kN︱ 160 mm︱ 450 mm︱total power requirement 3,7 kW︱dimensions 980x1430x1600 mm︱weight 1380 kg︱
          Accessories / equipment: - Three driven rollers with a smooth surface - Hydraulic delivery of the upper roller - Working position horizontal and vertical - Digital display with memory function - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can bend different profiles are used e.g. Flat iron, T-iron, solid material etc.
            80 mm
            roll diameter 260 mm
            7 U/min
            170 mm
            27 kN
            160 mm
            450 mm
            total power requirement 3,7 kW
            dimensions 980x1430x1600 mm
            weight 1380 kg
            Description :
            Accessories / equipment:
            - Three driven rollers with a smooth surface
            - Hydraulic delivery of the upper roller
            - Working position horizontal and vertical
            - Digital display with memory function
            - Bearings with tapered roller bearings
            - Use of replaceable slide rails on the guide carriage
            - The standard roller set is included. He can bend
            different profiles are used e.g. Flat iron, T-iron, solid material
            etc.


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Pipe-Bending Machine ZOPF ZB 70/3H ECO


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4040180 · Pipe-Bending Machine

          ZOPF - ZB 70/3H ECO - - Neu -

          Technical details
          40 mm︱ 8,5 U/min︱ 120 mm︱roll diameter 152 / 162 mm︱engine output 1,1 kW︱connected load 400/50 V/Hz︱hydraulic pump 1,1 kW︱ 80 kN︱range L-W-H 900 x 600 x 1000 mm︱weight 470 kg︱
          Equipment / Accessories: - Three driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn used different profiles
            40 mm
            8,5 U/min
            120 mm
            roll diameter 152 / 162 mm
            engine output 1,1 kW
            connected load 400/50 V/Hz
            hydraulic pump 1,1 kW
            80 kN
            range L-W-H 900 x 600 x 1000 mm
            weight 470 kg
            Description :
            Equipment / Accessories:
            - Three driven rollers
            - Hydraulic delivery of the upper roller
            - Digital display with memory function
            - Working position horizontal and vertical
            - Bearings with tapered roller bearings
            - Use of replaceable slide rails on the guide carriage
            - The standard roller set is included. He can turn
            used different profiles


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Pipe-Bending Machine ZOPF ZB 70/3H


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-9010098 · Pipe-Bending Machine

          ZOPF - ZB 70/3H - - Neu -

          Technical details
          40 mm︱ 8,5 U/min︱ 120 mm︱roll diameter 152 / 162 mm︱engine output 1,1 kW︱connected load 400/50 V/Hz︱hydraulic pump 1,1 kW︱ 80 kN︱range L-W-H 900 x 600 x 1000 mm︱weight 470 kg︱
          Equipment / Accessories: - Three driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn used different profiles
            40 mm
            8,5 U/min
            120 mm
            roll diameter 152 / 162 mm
            engine output 1,1 kW
            connected load 400/50 V/Hz
            hydraulic pump 1,1 kW
            80 kN
            range L-W-H 900 x 600 x 1000 mm
            weight 470 kg
            Description :
            Equipment / Accessories:
            - Three driven rollers
            - Hydraulic delivery of the upper roller
            - Digital display with memory function
            - Working position horizontal and vertical
            - Bearings with tapered roller bearings
            - Use of replaceable slide rails on the guide carriage
            - The standard roller set is included. He can turn
            used different profiles


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Pipe-Bending Machine ZOPF ZB 100/3H


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4040225 · Pipe-Bending Machine

          ZOPF - ZB 100/3H - - Neu -

          Technical details
          shaft diameter 60 mm︱Shaft revolutions 6 U/min︱roll diameter 215 mm︱pressure hydraulic cylinder 180 kN︱dimensions 1125x870x1620 mm︱weight 820 kg︱
          Accessories / Equipment: - Three driven rollers - Hydraulic delivery of the upper roller - Working position horizontal and vertical - Digital display with memory function - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. It can bend various profiles flat iron, T-iron, solid material etc.
            shaft diameter 60 mm
            Shaft revolutions 6 U/min
            roll diameter 215 mm
            pressure hydraulic cylinder 180 kN
            dimensions 1125x870x1620 mm
            weight 820 kg
            Description :
            Accessories / Equipment:
            - Three driven rollers
            - Hydraulic delivery of the upper roller
            - Working position horizontal and vertical
            - Digital display with memory function
            - Bearings with tapered roller bearings
            - Use of replaceable slide rails on the guide carriage
            - The standard roller set is included. It can bend various profiles flat iron, T-iron, solid material etc.



        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Pipe-Bending Machine ZOPF ZB 100/2H


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4040255 · Pipe-Bending Machine

          ZOPF - ZB 100/2H - - Neu -

          Technical details
          roll diameter 215 mm︱shaft diameter 60 mm︱Shaft revolutions 6 U/min︱ 100x2 mm︱ 80x15 mm︱pressure hydraulic cylinder 180 kN︱total power requirement 2,2 kW︱weight 720 kg︱dimensions 1200x900x1700 mm︱
          Accessories / Equipment: - Three driven rollers - Hydraulic delivery of the upper roller - Working position horizontal and vertical - Digital display with memory function - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. It can bend various profiles flat iron, T-iron, solid material etc.
            roll diameter 215 mm
            shaft diameter 60 mm
            Shaft revolutions 6 U/min
            100x2 mm
            80x15 mm
            pressure hydraulic cylinder 180 kN
            total power requirement 2,2 kW
            weight 720 kg
            dimensions 1200x900x1700 mm
            Description :
            Accessories / Equipment:
            - Three driven rollers
            - Hydraulic delivery of the upper roller
            - Working position horizontal and vertical
            - Digital display with memory function
            - Bearings with tapered roller bearings
            - Use of replaceable slide rails on the guide carriage
            - The standard roller set is included. It can bend various profiles flat iron, T-iron, solid material etc.



        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Pipe-Bending Machine ERCOLINA MB42EDTP-M


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4040187 · Pipe-Bending Machine

          ERCOLINA - MB42EDTP-M - - Neu -

          Technical details
          R10-R260210 °︱bending speed 2 U/min︱ 1 1/4" x 3,5 mm︱ einphasig - 230 V︱drive motor 1,1 kW︱ < 70 dB︱weight of the machine ca. 80 kg︱dimensions of the machine ca. 410 x 1000 x 570 mm︱
          Accessories / equipment: Hard copper and aluminum: 54x2 mm Steel tube: 42x3 mm Stainless steel: 42x2.5 mm Solid material: 30 mm Number of programs: 30 each 9 bends Control: Soft-touch control panel in 8 different languages Mobile by driving device The controller allows easy programming of the automatic cycle The controller is equipped with a system diagnostics and has a great language selection. Patented fast tool change system A single bending speed
            R10-R260
            210 °
            bending speed 2 U/min
            1 1/4" x 3,5 mm
            einphasig - 230 V
            drive motor 1,1 kW
            < 70 dB
            weight of the machine ca. 80 kg
            dimensions of the machine ca. 410 x 1000 x 570 mm
            Description :
            Accessories / equipment:
            Hard copper and aluminum: 54x2 mm
            Steel tube: 42x3 mm
            Stainless steel: 42x2.5 mm
            Solid material: 30 mm
            Number of programs: 30 each 9 bends
            Control: Soft-touch control panel in 8 different languages
            Mobile by driving device
            The controller allows easy programming of the automatic cycle
            The controller is equipped with a system diagnostics and has a
            great language selection.
            Patented fast tool change system
            A single bending speed


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Pipe-Bending Machine AK-BEND APK 50


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-9010071 · Pipe-Bending Machine

          AK-BEND - APK 50 - - Neu -

          Technical details
          round material 40 mm︱tube diameter 70x2 mm︱square material 80x30x3 mm︱L-beam 50 x 5 mm︱I - beam section - flat steel 80 x 16 mm︱I-beam section - upend 50 x 15 mm︱roll diameter 157 mm︱Shaft diameter 50 mm︱bending speed 2,95 m/min︱total power requirement 1,1 kW︱weight of the machine ca. 500 kg︱dimensions of the machine ca. 1000x950x1450 mm︱
          Domestic equipments: - Special steel shafts (42CrMo4) hardened and ground - a set of standard rollers - lower rollers up and down hydraulically deliverable - digital display for lower rollers - separate control panel - in one direction manually adjustable lateral straightening rollers - manual lubrication - horizontal and vertical operation - CE mark / Declaration of Conformity - Operating instructions in German
            round material 40 mm
            tube diameter 70x2 mm
            square material 80x30x3 mm
            L-beam 50 x 5 mm
            I - beam section - flat steel 80 x 16 mm
            I-beam section - upend 50 x 15 mm
            roll diameter 157 mm
            Shaft diameter 50 mm
            bending speed 2,95 m/min
            total power requirement 1,1 kW
            weight of the machine ca. 500 kg
            dimensions of the machine ca. 1000x950x1450 mm
            Description :
            Domestic equipments:
            - Special steel shafts (42CrMo4) hardened and ground
            - a set of standard rollers
            - lower rollers up and down hydraulically deliverable
            - digital display for lower rollers
            - separate control panel
            - in one direction manually adjustable lateral straightening rollers
            - manual lubrication
            - horizontal and vertical operation
            - CE mark / Declaration of Conformity
            - Operating instructions in German


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Pipe-Bending Machine ZOPF ZB 60 M


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-10010 · Pipe-Bending Machine

          ZOPF - ZB 60 M - - Neu -

          Technical details
          95 mm︱Shaft diameter 30 mm︱Shaft revolutions 7 U/min︱roll diameter 132 mm︱Drive 0,75 kW︱weight 220 kg︱range L-W-H 530x900x660 mm︱
          Equipment / Accessories: - Two driven rollers with grooved surface - Manual feed of the upper roller - working position horizontal and vertical (with tilting base) - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn different profiles are used e.g. Flat iron, T-iron, solid material etc.
            95 mm
            Shaft diameter 30 mm
            Shaft revolutions 7 U/min
            roll diameter 132 mm
            Drive 0,75 kW
            weight 220 kg
            range L-W-H 530x900x660 mm
            Description :
            Equipment / Accessories:
            - Two driven rollers with grooved surface
            - Manual feed of the upper roller
            - working position horizontal and vertical (with tilting base)
            - Bearings with tapered roller bearings
            - Use of replaceable slide rails on the guide carriage
            - The standard roller set is included. He can turn
            different profiles are used e.g. Flat iron, T-iron, solid material
            etc.


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Pipe-Bending Machine ZOPF ZB 80/2 H


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-9010085 · Pipe-Bending Machine

          ZOPF - ZB 80/2 H - - Neu -

          Technical details
          50 mm︱ 8,5 U/min︱ 100 kN︱roll diameter 162 mm︱Drive 1,5 kW︱weight 495 kg︱range L-W-H 1100x850x1350 mm︱
          Equipment / Accessories: - Two driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - Footswitch - standard roller set
            50 mm
            8,5 U/min
            100 kN
            roll diameter 162 mm
            Drive 1,5 kW
            weight 495 kg
            range L-W-H 1100x850x1350 mm
            Description :
            Equipment / Accessories:
            - Two driven rollers
            - Hydraulic delivery of the upper roller
            - Digital display with memory function
            - Working position horizontal and vertical
            - Bearings with tapered roller bearings
            - Use of replaceable slide rails on the guide carriage
            - Footswitch
            - standard roller set


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Pipe-Bending Machine ERCOLINA HB60-M1


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4040273 · Pipe-Bending Machine

          ERCOLINA - HB60-M1 - - NEU -

          Technical details
          63x4,2 mm︱external diameter min. Ø 5 mm︱bending radius min. 10 mm︱bending radius max. 270 mm︱Bending Angle max. 210 °︱bending device gegen Uhrzeigersinn ︱total power requirement 0,75 kW︱weight of the machine ca. 130 kg︱dimensions of the machine ca. 740x470x1030 mm︱
            63x4,2 mm
            external diameter min. Ø 5 mm
            bending radius min. 10 mm
            bending radius max. 270 mm
            Bending Angle max. 210 °
            bending device gegen Uhrzeigersinn
            total power requirement 0,75 kW
            weight of the machine ca. 130 kg
            dimensions of the machine ca. 740x470x1030 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Pipe-Bending Machine ZOPF ZB 30/3 MDZ


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4040300 · Pipe-Bending Machine

          ZOPF - ZB 30/3 MDZ - - Neu -

          Technical details
          roll diameter 76-86 mm︱Shaft diameter 20 mm︱Shaft revolutions 11 U/min︱Bending capacity round tube 30 mm︱ 25x6 mm︱Angle iron 20x20x4 mm︱Drive 0,18 kW︱range L-W-H 530x420x500 mm︱weight 80 kg︱
            roll diameter 76-86 mm
            Shaft diameter 20 mm
            Shaft revolutions 11 U/min
            Bending capacity round tube 30 mm
            25x6 mm
            Angle iron 20x20x4 mm
            Drive 0,18 kW
            range L-W-H 530x420x500 mm
            weight 80 kg
            Description :



        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Pipe-Bending Machine AK-BEND APK 30


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-10040 · Pipe-Bending Machine

          AK-BEND - APK 30 - - Neu -

          Technical details
          bending speed 2.1 m/min︱Bending capacity - square 30x30 mm︱bending capacity - flat iron 80x15 mm︱Bending capacity - flat iron on edge 50x10 mm︱tube diameter 1" oder 60x2 mm︱Shaft diameter - upper 35 mm︱Shaft diameter - lower 30 mm︱total power requirement 0,75 kw︱range L-W-H 650 x 500 x 1300 mm︱weight 170 kg︱
          Standard features: - hardened special steel shafts - a set of hardened rollers - Bottom rollers are driven - lateral straightening rollers - Foot pedal - horizontal and vertical working
            bending speed 2.1 m/min
            Bending capacity - square 30x30 mm
            bending capacity - flat iron 80x15 mm
            Bending capacity - flat iron on . 50x10 mm
            tube diameter 1" oder 60x2 mm
            Shaft diameter - upper 35 mm
            Shaft diameter - lower 30 mm
            total power requirement 0,75 kw
            range L-W-H 650 x 500 x 1300 mm
            weight 170 kg
            Description :
            Standard features:
            - hardened special steel shafts
            - a set of hardened rollers
            - Bottom rollers are driven
            - lateral straightening rollers
            - Foot pedal
            - horizontal and vertical working


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          •   
          •