European network of stockholding machinery dealers

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:

          Sheet metal working - shaeres - bending

          Machinelist: Sheet metal working / shaeres / bending


          Hydr. pressbrake

          used Sheet metal working / shaeres / bending Hydr. pressbrake FARINA GBP PLUS 30220


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4020952 · Hydr. pressbrake

          FARINA - GBP PLUS 30220 - - Neu - CYBELEC VisiTouch 19 2D

          Technical details
          pressure 220 t︱chamfer lenght 3150 mm︱distance between columns 2600 mm︱Control CYBELEC VisiTouch 19 2D ︱dayligth 525 mm︱stroke 275 mm︱feed down 150 mm/sec︱feed bending 0-10 mm/sec︱feed up 120 mm/sec︱total power requirement 18,5 kW︱weight of the machine ca. 15.600 kg︱dimensions of the machine ca. 4250x2000x3150 mm︱
            pressure 220 t
            chamfer lenght 3150 mm
            distance between columns 2600 mm
            Control CYBELEC VisiTouch 19 2D
            dayligth 525 mm
            stroke 275 mm
            feed down 150 mm/sec
            feed bending 0-10 mm/sec
            feed up 120 mm/sec
            total power requirement 18,5 kW
            weight of the machine ca. 15.600 kg
            dimensions of the machine ca. 4250x2000x3150 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake FARINA BSA PLUS 30200


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4021135 · Hydr. pressbrake

          FARINA - BSA PLUS 30200 - - NEU -

          Technical details
          pressure 200 t︱chamfer lenght 3000 mm︱distance between columns mm︱throat mm︱distance between table / ram mm︱stroke mm︱feed down mm/sec︱feed bending mm/sec︱feed up mm/sec︱engine output kW︱weight of the machine ca. kg︱
            pressure 200 t
            chamfer lenght 3000 mm
            Description :



        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake FARINA PFO 130/30


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4021056 · Hydr. pressbrake

          FARINA - PFO 130/30 - - NEU -

          Technical details
          pressure 130 t︱chamfer lenght 3150 mm︱distance between columns 2600 mm︱engine output 15 kW︱weight of the machine ca. 10900 kg︱dimensions of the machine ca. 3990x1750x2900 mm︱
          Domestic equipments: - DELEM DA66T - 2D CNC control with LCD color display for control of 7 axes: Y1 = 1 ° cylinder Y2 = 2 ° cylinder X1 = horizontal movement of the backgauge X3 = horizontal movement of the stop finger / inclination R = vertical movement of the backgauge Z1-Z2 = lateral movement of the stop fingers - Top Dead Center - Speed ??changeover point - bending end - Deactivation point of the safety light barrier - Retreat stop - CNC controlled proportional pressure control - conical bending - USB port - DFC stator suspension compensation - Motorized back gauge model "AS" with 5 controlled axes - X-axis: 1000 mm stroke, X3-axis: 200 mm stroke - R-axis: 250 mm stroke - Hydraulic upper tool clamping make Wila, type: "Premium" NSCL-II-HC - Manual Unterwerkzeugklemmung, make Wila - Incl. Tools: sectioned, hardened and ground: Upper tool: Type: Wila BIU-021 Lower tool: Type: 4-V - Hydraulic compensation - "Platinum Package" consisting of: Active dynamic crowning Compensation of the stator suspension Sheet thickness measuring system diagnostic module - Active dynamic crowning device: Constant angle over the entire length Complete management of the crowning fully automatic Constant angle on the sides and in the middle No speed reduction The system works automatically and is almost invisible, no additional equipment required - Compensation of the stator suspension Bending sheet metal plates of different lengths without that The program parameters need to be changed. Bending of notched or perforated sheets without The program parameters need to be changed. Possibility of parts to work with reduced dimensions then test the workpiece with the actual dimensions without having to change the program parameters. No speed reduction during processing. The system works automatically and is almost invisible, no accessories required. - Sheet thickness measuring system Increased accuracy Fully automatic system Less waste Control of the material No speed reduction The system works automatically and is almost invisible, no accessories required - Soft start system "Start / Stop" to save energy - Control cabinet cooling - Hydraulic parts from Hoerbiger and Denison - Electrical parts from Rockwell Automation, Allen Bradley, Schneider, Siemens, Delem - Cabinet lighting through a LED strip - Machine lighting behind the machine with 2 LED strips - Footswitch - Laser safety system "DSP AP MSC" with height-adjustable Special arms. The system allows a speed change of only 2 mm from sheet metal and optimizes cycle times and maximum safety. - 2 front support arms (500mm): laterally movable and manually height adjustable by handwheel. - side and rear safety devices - Service key - Operating instructions and maintenance manual - Machine without oil - Machine according to standard 2006/42 / CE and CE certificate
            pressure 130 t
            chamfer lenght 3150 mm
            distance between columns 2600 mm
            engine output 15 kW
            weight of the machine ca. 10900 kg
            dimensions of the machine ca. 3990x1750x2900 mm
            Description :
            Domestic equipments:
            - DELEM DA66T - 2D CNC control with LCD color display for control
            of 7 axes:
            Y1 = 1 ° cylinder
            Y2 = 2 ° cylinder
            X1 = horizontal movement of the backgauge
            X3 = horizontal movement of the stop finger / inclination
            R = vertical movement of the backgauge
            Z1-Z2 = lateral movement of the stop fingers

            - Top Dead Center
            - Speed ??changeover point
            - bending end
            - Deactivation point of the safety light barrier
            - Retreat stop
            - CNC controlled proportional pressure control
            - conical bending
            - USB port
            - DFC stator suspension compensation
            - Motorized back gauge model "AS" with 5 controlled axes
            - X-axis: 1000 mm stroke, X3-axis: 200 mm stroke
            - R-axis: 250 mm stroke
            - Hydraulic upper tool clamping make Wila, type: "Premium" NSCL-II-HC
            - Manual Unterwerkzeugklemmung, make Wila
            - Incl. Tools: sectioned, hardened and ground:
            Upper tool: Type: Wila BIU-021
            Lower tool: Type: 4-V
            - Hydraulic compensation

            - "Platinum Package" consisting of:
            Active dynamic crowning
            Compensation of the stator suspension
            Sheet thickness measuring system
            diagnostic module

            - Active dynamic crowning device:
            Constant angle over the entire length
            Complete management of the crowning
            fully automatic
            Constant angle on the sides and in the middle
            No speed reduction
            The system works automatically and is almost invisible,
            no additional equipment required

            - Compensation of the stator suspension
            Bending sheet metal plates of different lengths without that
            The program parameters need to be changed.
            Bending of notched or perforated sheets without
            The program parameters need to be changed.
            Possibility of parts to work with reduced dimensions
            then test the workpiece with the actual dimensions
            without having to change the program parameters.
            No speed reduction during processing.
            The system works automatically and is almost invisible, no accessories
            required.


            - Sheet thickness measuring system
            Increased accuracy
            Fully automatic system
            Less waste
            Control of the material
            No speed reduction
            The system works automatically and is almost invisible, no accessories
            required

            - Soft start system "Start / Stop" to save energy
            - Control cabinet cooling
            - Hydraulic parts from Hoerbiger and Denison
            - Electrical parts from Rockwell Automation, Allen Bradley, Schneider,
            Siemens, Delem
            - Cabinet lighting through a LED strip
            - Machine lighting behind the machine with 2 LED strips
            - Footswitch
            - Laser safety system "DSP AP MSC" with height-adjustable
            Special arms. The system allows a speed change of only 2 mm
            from sheet metal and optimizes cycle times and maximum safety.
            - 2 front support arms (500mm): laterally movable and manually
            height adjustable by handwheel.
            - side and rear safety devices
            - Service key
            - Operating instructions and maintenance manual
            - Machine without oil
            - Machine according to standard 2006/42 / CE and CE certificate


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake FARINA BSA PLUS 40320


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4021137 · Hydr. pressbrake

          FARINA - BSA PLUS 40320 - - NEU -

          Technical details
          pressure 320 t︱chamfer lenght 4000 mm︱stroke 350 mm︱arm length 400 mm︱
            pressure 320 t
            chamfer lenght 4000 mm
            stroke 350 mm
            arm length 400 mm
            Description :



        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake FARINA PFO 130/30


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4021102 · Hydr. pressbrake

          FARINA - PFO 130/30 - - NEU - CYBELEC VisiTouch

          Technical details
          pressure 130 t︱chamfer lenght 3150 mm︱distance between columns 2600 mm︱engine output 15 kW︱control CYBELEC VisiTouch ︱weight of the machine ca. 10900 kg︱dimensions of the machine ca. 3990x1750x2900 mm︱
          Domestic equipments: - DELEM DA66T - 2D CNC control with LCD color display for control of 7 axes: Y1 = 1 ° cylinder Y2 = 2 ° cylinder X1 = horizontal movement of the backgauge X3 = horizontal movement of the stop finger / inclination R = vertical movement of the backgauge Z1-Z2 = lateral movement of the stop fingers - Top Dead Center - Speed ??changeover point - bending end - Deactivation point of the safety light barrier - Retreat stop - CNC controlled proportional pressure control - conical bending - USB port - DFC stator suspension compensation - Motorized back gauge model "AS" with 5 controlled axes - X-axis: 1000 mm stroke, X3-axis: 200 mm stroke - R-axis: 250 mm stroke - Hydraulic upper tool clamping make Wila, type: "Premium" NSCL-II-HC - Manual Unterwerkzeugklemmung, make Wila - Incl. Tools: sectioned, hardened and ground: Upper tool: Type: Wila BIU-021 Lower tool: Type: 4-V - Hydraulic compensation - "Platinum Package" consisting of: Active dynamic crowning Compensation of the stator suspension Sheet thickness measuring system diagnostic module - Active dynamic crowning device: Constant angle over the entire length Complete management of the crowning fully automatic Constant angle on the sides and in the middle No speed reduction The system works automatically and is almost invisible, no additional equipment required - Compensation of the stator suspension Bending sheet metal plates of different lengths without that The program parameters need to be changed. Bending of notched or perforated sheets without The program parameters need to be changed. Possibility of parts to work with reduced dimensions then test the workpiece with the actual dimensions without having to change the program parameters. No speed reduction during processing. The system works automatically and is almost invisible, no accessories required. - Sheet thickness measuring system Increased accuracy Fully automatic system Less waste Control of the material No speed reduction The system works automatically and is almost invisible, no accessories required - Soft start system "Start / Stop" to save energy - Control cabinet cooling - Hydraulic parts from Hoerbiger and Denison - Electrical parts from Rockwell Automation, Allen Bradley, Schneider, Siemens, Delem - Cabinet lighting through a LED strip - Machine lighting behind the machine with 2 LED strips - Footswitch - Laser safety system "DSP AP MSC" with height-adjustable Special arms. The system allows a speed change of only 2 mm from sheet metal and optimizes cycle times and maximum safety. - 2 front support arms (500mm): laterally movable and manually height adjustable by handwheel. - side and rear safety devices - Service key - Operating instructions and maintenance manual - Machine without oil - Machine according to standard 2006/42 / CE and CE certificate
            pressure 130 t
            chamfer lenght 3150 mm
            distance between columns 2600 mm
            engine output 15 kW
            control CYBELEC VisiTouch
            weight of the machine ca. 10900 kg
            dimensions of the machine ca. 3990x1750x2900 mm
            Description :
            Domestic equipments:
            - DELEM DA66T - 2D CNC control with LCD color display for control
            of 7 axes:
            Y1 = 1 ° cylinder
            Y2 = 2 ° cylinder
            X1 = horizontal movement of the backgauge
            X3 = horizontal movement of the stop finger / inclination
            R = vertical movement of the backgauge
            Z1-Z2 = lateral movement of the stop fingers

            - Top Dead Center
            - Speed ??changeover point
            - bending end
            - Deactivation point of the safety light barrier
            - Retreat stop
            - CNC controlled proportional pressure control
            - conical bending
            - USB port
            - DFC stator suspension compensation
            - Motorized back gauge model "AS" with 5 controlled axes
            - X-axis: 1000 mm stroke, X3-axis: 200 mm stroke
            - R-axis: 250 mm stroke
            - Hydraulic upper tool clamping make Wila, type: "Premium" NSCL-II-HC
            - Manual Unterwerkzeugklemmung, make Wila
            - Incl. Tools: sectioned, hardened and ground:
            Upper tool: Type: Wila BIU-021
            Lower tool: Type: 4-V
            - Hydraulic compensation

            - "Platinum Package" consisting of:
            Active dynamic crowning
            Compensation of the stator suspension
            Sheet thickness measuring system
            diagnostic module

            - Active dynamic crowning device:
            Constant angle over the entire length
            Complete management of the crowning
            fully automatic
            Constant angle on the sides and in the middle
            No speed reduction
            The system works automatically and is almost invisible,
            no additional equipment required

            - Compensation of the stator suspension
            Bending sheet metal plates of different lengths without that
            The program parameters need to be changed.
            Bending of notched or perforated sheets without
            The program parameters need to be changed.
            Possibility of parts to work with reduced dimensions
            then test the workpiece with the actual dimensions
            without having to change the program parameters.
            No speed reduction during processing.
            The system works automatically and is almost invisible, no accessories
            required.


            - Sheet thickness measuring system
            Increased accuracy
            Fully automatic system
            Less waste
            Control of the material
            No speed reduction
            The system works automatically and is almost invisible, no accessories
            required

            - Soft start system "Start / Stop" to save energy
            - Control cabinet cooling
            - Hydraulic parts from Hoerbiger and Denison
            - Electrical parts from Rockwell Automation, Allen Bradley, Schneider,
            Siemens, Delem
            - Cabinet lighting through a LED strip
            - Machine lighting behind the machine with 2 LED strips
            - Footswitch
            - Laser safety system "DSP AP MSC" with height-adjustable
            Special arms. The system allows a speed change of only 2 mm
            from sheet metal and optimizes cycle times and maximum safety.
            - 2 front support arms (500mm): laterally movable and manually
            height adjustable by handwheel.
            - side and rear safety devices
            - Service key
            - Operating instructions and maintenance manual
            - Machine without oil
            - Machine according to standard 2006/42 / CE and CE certificate


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact

          Plate Shear - Hydraulic

          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic FARINA CFM 2100 x 4,0


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011176 · Plate Shear - Hydraulic

          FARINA - CFM 2100 x 4,0 - - NEU -

          Technical details
          sheet width 2040 mm︱ 4 mm︱sheet thickness for stainless steel 2 mm︱total power requirement 7,5 kW︱rear stop 750 mm︱weight of the machine ca. 2600 kg︱dimensions 2810 x 2230 x 1360 mm︱
            sheet width 2040 mm
            4 mm
            sheet thickness for stainless st. 2 mm
            total power requirement 7,5 kW
            rear stop 750 mm
            weight of the machine ca. 2600 kg
            dimensions 2810 x 2230 x 1360 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic FARINA HTBS BASIC


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011089 · Plate Shear - Hydraulic

          FARINA - HTBS BASIC - - NEU -

          Technical details
          sheet width 3060 mm︱plate thickness 10 mm︱back stop - adjustable 1000 mm︱cutting angle 1,5 °︱weight of the machine ca. 10500 kg︱
            sheet width 3060 mm
            plate thickness 10 mm
            back stop - adjustable 1000 mm
            cutting angle 1,5 °
            weight of the machine ca. 10500 kg


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic FARINA CFM 1360 x 3,0


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011175 · Plate Shear - Hydraulic

          FARINA - CFM 1360 x 3,0 - - NEU -

          Technical details
          sheet width 1350 mm︱ 3 mm︱sheet thickness for stainless steel 1,5 mm︱rear stop 600 mm︱total power requirement 3 kW︱weight of the machine ca. 1150 kg︱dimensions 2030 x 1940 x 1220 mm︱
            sheet width 1350 mm
            3 mm
            sheet thickness for stainless st. 1,5 mm
            rear stop 600 mm
            total power requirement 3 kW
            weight of the machine ca. 1150 kg
            dimensions 2030 x 1940 x 1220 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic FARINA BTS 3006


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011177 · Plate Shear - Hydraulic

          FARINA - BTS 3006 - - NEU -

          Technical details
          sheet width 3050 mm︱plate thickness 6 mm︱back stop - adjustable 1000 mm︱cutting angle 1,5 °︱0 17 St.︱total power requirement 11 kW︱quantity of oil 180 l︱weight of the machine ca. 5950 kg︱
            sheet width 3050 mm
            plate thickness 6 mm
            back stop - adjustable 1000 mm
            cutting angle 1,5 °
            0 17 St.
            total power requirement 11 kW
            quantity of oil 180 l
            weight of the machine ca. 5950 kg


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic FARINA CFMT 2560 x 4,0


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011174 · Plate Shear - Hydraulic

          FARINA - CFMT 2560 x 4,0 - - NEU -

          Technical details
          sheet width 2550 mm︱ 4 mm︱sheet thickness for stainless steel 2 mm︱rear stop 750 mm︱total power requirement 7,5 kW︱weight of the machine ca. 3050 kg︱dimensions 3300 x 2230 x 1360 mm︱
            sheet width 2550 mm
            4 mm
            sheet thickness for stainless st. 2 mm
            rear stop 750 mm
            total power requirement 7,5 kW
            weight of the machine ca. 3050 kg
            dimensions 3300 x 2230 x 1360 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          Used sheet metal working machines at LagerMaschinen.de
          Get your used sheet metal working machines at LagerMaschinen.de

          Sheet metal working machines are machines used in the metalworking process involved in the production of sheet metal. Some of the types of used sheet metal working machines involved in this process are lathes roll slitters brake presses and stamping presses to name just a few. These used sheet metal working machines are used to cut bend flatten and otherwise manipulate metal into the desired shape and thickness. Used sheet metal working machines can be used to roll or bend sheet metal into a desired shape and to give the fold or curve the desired angle they can also be used to punch the sheet metal into the desired shape.

          Used sheet metal working machines for every application

          From small home production labs for hobbyists to large-scale production facilities LagerMaschinen.de has used sheet metal working machines for every use. For some precision is not necessarily the most important consideration when choosing used sheet metal working machines. For others the precision and the flexibility of the used sheet metal working machines is the most important consideration. Whether you need bending folding cutting pressing or punching machines you will find what you are looking for at LagerMaschinen.de

          Quality used machines at LagerMaschinen.de

          For many companies the cost of new equipment can be a source of problems. With its international network of suppliers LagerMaschinen.de ensures that your used sheet metal working machines meet your quality requirements and at the same time guarantees a price that is far more cost-effective than new machines.