Straightening Press - Single Column
Machinelist: Straightening Press - Single Column
Straightening Press - Single Column
- Emuk Maschinenhandel GmbH
- Siemensstrasse 24
- 76316 Malsch
- Deutschland
-
+49 (0) 7246 943161
-
info@emuk.info
www.emuk.info
#2070-E23017 · Straightening Press - Single Column
DUNKES - HZT 6,3 - - 1993 -
Technical details
- HANS - JÜRGEN GEIGER
- James-Watt-Str. 12
- 72555 Metzingen
- Deutschland
-
(0049)-7123-18040
(0049)-7123-18384 -
geiger@geiger-germany.com
www.geiger-germany.com
#1049-707071 · Straightening Press - Single Column
EITEL - RP 16 - - 1978 -
Technical details
E I T E L Hydraulic Single Column Straightening Press ( C-Frame ) Model RP 16, Year 1978 Ser.-No. 14 348 Pressure of upper piston 16 to Table size of straightening table 200 x 2.200 mm Mounting height max. with/ without straightening table 300/550 mm Distance between column and center of piston 160 mm Height of table over floor 950 mm Pivot hole-? within piston 50 mm Stroke of the upper piston, approx. 150 mm Straightening stroke 20 mm Piston-? 150 mm Stroke speeds downwards 1,8 m/min. upwards 4,3 m/min. Pump drive: 2,2 kW Total electrical load approx 2,3 kW - 380 V - 50 cycles Weight approx. 800 kg Outside dimensions 2,3 x 1,0 x 2,0 m Accessories / Special Features : • 1-Hand-Control lever for manual stroke control including straightening stroke control with a cam disc which is attached to the hand lever (straightening stroke 20 mm) and with straightening stroke switching • adjustable return stroke switching which is ideal for measuring of larger workpieces. The piston reverses and stops shortly above the workpiece for measuring • Mounted shaft straightening equipment model WR 1 with center height of 135 mm x Workpiece length on rollers = approx. 1500 mm, between centers approx. 1000 mm Interchangeable Center tailstocks for clamping shaftparts with centers available. workpiece-swing diameter approx. 180 mm, adjustable on the straightening table 2.200 mm, • By usage of centers the workpiece weight can be compensated with spring sets. • 3 Measuring gauge holders to be mounted on the straightening device, (moving) with workpiece feelers and gauges • two pieces Straightening dies, on the table adjustable straightening supports, and distance plates, springs for different workpiece diameters. Condition : good to very good – can be inspected under power, especially for long workpieces Delivery : ex stock – as inspected Payment : net – after completion of contract
- HANS - JÜRGEN GEIGER
- James-Watt-Str. 12
- 72555 Metzingen
- Deutschland
-
(0049)-7123-18040
(0049)-7123-18384 -
geiger@geiger-germany.com
www.geiger-germany.com
- HANS - JÜRGEN GEIGER
- James-Watt-Str. 12
- 72555 Metzingen
- Deutschland
-
(0049)-7123-18040
(0049)-7123-18384 -
geiger@geiger-germany.com
www.geiger-germany.com
#1049-443208 · Straightening Press - Single Column
GALDABINI - RPRS 160 - - 1993 -
Technical details
- Markus Hirsch GmbH
- Hüttenstrasse 1
- 46284 Dorsten
- Deutschland
-
+49 2362 95035 12
+49 2362 95035 10 -
liersch@hirsch-maschinen.de
www.hirsch-maschinen.de
#1077-00960 · Straightening Press - Single Column
HIDROLIKSAN - 60 Tons C-Typ - - -
Technical details
- Markus Hirsch GmbH
- Hüttenstrasse 1
- 46284 Dorsten
- Deutschland
-
+49 2362 95035 12
+49 2362 95035 10 -
liersch@hirsch-maschinen.de
www.hirsch-maschinen.de
- HANS - JÜRGEN GEIGER
- James-Watt-Str. 12
- 72555 Metzingen
- Deutschland
-
(0049)-7123-18040
(0049)-7123-18384 -
geiger@geiger-germany.com
www.geiger-germany.com
- Stiens Werkzeugmaschinen GmbH
- Mittelweg 92
- 59302 Oelde
- Deutschland
-
+49 252283490
(0049) - 2522 - 8349-20 -
info@stiens.de
www.stiens.de
#1039-9030 · Straightening Press - Single Column
MAE - HY-S 63 RH - - 1998 -
Technical details
Hydraulic straightening press MAE - HY-S 63 RH
- Pressen HAAS GmbH
- Kreuzsteig 6
- 72479 Straßberg
- Deutschland
-
+49 7574 59 97 59
+49 7574 92 17 24 -
info@pressen-haas.de
www.pressen-haas.de
#2053-0457 · Straightening Press - Single Column
MAE - S 40 RH - - 2007 -
Technical details
Straightening press in almost new condition.The ram moves downwards by pressing down the hand lever until the preset stroke depth is reached, which can be set sensitively and precisely using the adjustment on the end of the handle.
- ATMH Werkzeugmaschinenhandel GmbH
- Scharpenbergerstr.96-98
- 58256 Ennepetal
- Deutschland
-
+49 (0) 2333 / 403 43 70
+49 (0) 2333 / 403 43 75 -
info@atmh.de
www.atmh.de