European network of stockholding machinery dealers

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:

          Bandsaw - Horizontal

          Machinelist: Bandsaw - Horizontal


          Bandsaw - Horizontal

          used Saws Bandsaw - Horizontal ZIMMER Z 185-1/R


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66208 · Bandsaw - Horizontal

          ZIMMER - Z 185-1/R - - - neu - -

          Technical details
          cutting diameter 185 mm︱saw band length 2.085 x 20 x 0,90 mm︱table height 915 mm︱band speed 30 - 75 m/min︱connected load frequency 230 V︱capacity 90 degrees: round 185 mm︱capacity 90 degrees: square 150 mm︱capacity 90 degrees: flat 220 x 150 mm︱total power requirement 2,35 kW︱weight of the machine ca. 195 kg︱dimensions of the machine ca. 550 x 1.280 x 1.740 mm mm︱
          Metal band saw with stepless electronic speed control and automatic lowering. • Selector switch for hydraulically controlled or manual band arm lowering • Saw arm can be swiveled up to 60 ° to the right • Quick-action vice • Belt guide with 8 ball bearings • Hydraulic saw band tension with tension pressure display and band break shutdown •Incl. Coolant system •Incl. Machine cabinet
            cutting diameter 185 mm
            saw band length 2.085 x 20 x 0,90 mm
            table height 915 mm
            band speed 30 - 75 m/min
            connected load frequency 230 V
            capacity 90 degrees: round 185 mm
            capacity 90 degrees: square 150 mm
            capacity 90 degrees: flat 220 x 150 mm
            total power requirement 2,35 kW
            weight of the machine ca. 195 kg
            dimensions of the machine ca. 550 x 1.280 x 1.740 mm mm
            Description :
            Metal band saw with stepless electronic speed control and
            automatic lowering.
            • Selector switch for hydraulically controlled or manual band arm lowering
            • Saw arm can be swiveled up to 60 ° to the right
            • Quick-action vice
            • Belt guide with 8 ball bearings
            • Hydraulic saw band tension with tension pressure display and band break
            shutdown
            •Incl. Coolant system
            •Incl. Machine cabinet


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal BERG & SCHMID GBS 305 AutoCut


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66225 · Bandsaw - Horizontal

          BERG & SCHMID - GBS 305 AutoCut - - - neu - -

          Technical details
          capacity 90 degrees: round 305 mm︱capacity 90 degrees: square 260 mm︱ 350 x 200 ︱saw band length 3375 x 27 x 0,9 mm︱band speed 37 + 74 m/min︱table height 940 mm︱total power requirement 1,5/1,8 kW︱weight of the machine ca. 0,61 t︱dimensions of the machine ca. 1,5 x 1,75 x 1,9 m︱
          Double miter metal band saw with AutoCut function - Miter cuts up to 60° left and 45° right - Ball bearing turntable - Vice can be moved sideways - Massive, large material support - Automatic cooling Figure is semi-automatic.
            capacity 90 degrees: round 305 mm
            capacity 90 degrees: square 260 mm
            350 x 200
            saw band length 3375 x 27 x 0,9 mm
            band speed 37 + 74 m/min
            table height 940 mm
            total power requirement 1,5/1,8 kW
            weight of the machine ca. 0,61 t
            dimensions of the machine ca. 1,5 x 1,75 x 1,9 m
            Description :
            Double miter metal band saw with AutoCut function
            - Miter cuts up to 60° left and 45° right
            - Ball bearing turntable
            - Vice can be moved sideways
            - Massive, large material support
            - Automatic cooling

            Figure is semi-automatic.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal ZIMMER Z 241-1/R


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66209 · Bandsaw - Horizontal

          ZIMMER - Z 241-1/R - - - neu - -

          Technical details
          cutting diameter 220 mm︱saw band length 2450 x 27 x 0,9 mm︱table height 915 mm︱band speed 35 + 70 m/min︱connected load frequency 400 V︱capacity 90 degrees: round 220 mm︱capacity 90 degrees: square 210 x 210 mm︱capacity 90 degrees: flat 230 x 185 mm︱total power requirement 1,2 kW︱weight of the machine ca. 240 kg︱dimensions of the machine ca. 870 x 1550 x 1740 mm︱
          The Zimmer Z241/R is a self-lowering saw for miter cuts from 0 ° - 60 ° left. After the cut, the machine stays through one Safety limit switches stand. The reduction is infinitely variable Hydraulic system adjustable. The saw arm can be raised after the cut any position. The saw arm remains at the desired position stand. The Z241 / R has the following features: Hydraulic cylinder, emulsion pump, eccentric tensioner, base, saw band, 400V Connector -16A- The machine is completely assembled and delivered ready for use.
            cutting diameter 220 mm
            saw band length 2450 x 27 x 0,9 mm
            table height 915 mm
            band speed 35 + 70 m/min
            connected load frequency 400 V
            capacity 90 degrees: round 220 mm
            capacity 90 degrees: square 210 x 210 mm
            capacity 90 degrees: flat 230 x 185 mm
            total power requirement 1,2 kW
            weight of the machine ca. 240 kg
            dimensions of the machine ca. 870 x 1550 x 1740 mm
            Description :
            The Zimmer Z241/R is a self-lowering saw for miter cuts from 0 ° -
            60 ° left. After the cut, the machine stays through one
            Safety limit switches stand. The reduction is infinitely variable
            Hydraulic system adjustable. The saw arm can be raised after the cut
            any position. The saw arm remains at the desired position
            stand.
            The Z241 / R has the following features:
            Hydraulic cylinder, emulsion pump, eccentric tensioner, base, saw band, 400V
            Connector -16A-
            The machine is completely assembled and delivered ready for use.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal BERG & SCHMID GBS 250 Super HA -I Easy


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66222 · Bandsaw - Horizontal

          BERG & SCHMID - GBS 250 Super HA -I Easy - - - Neu - -

          Technical details
          cutting diameter 255 mm︱saw band length 2765x 0,9 x 27 mm︱cutting width 300 x 180 mm︱turning speeds 35 + 70 U/min︱total power requirement 1,8 kW︱weight of the machine ca. 450 t︱dimensions of the machine ca. 1,7 x 1,23 x 1,75 m︱
          SPECIAL PRICE!!! Double miter metal band saw, frequency converter hydraulic semi-automatic GBS 250 Super HA-I Easy • miter left 60° + right 45° • Material height sensor (automatic cut start detection) • Frame and gear made from one piece, very quiet cut and very low vibration • Hydraulic vice can be moved sideways a. • Guided, high quality industrial bearings • Solid vice + machine casting • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring by ammeter • Cutting pressure feed regulator • Support roller (infeed side) • Ball bearing turntable Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise
            cutting diameter 255 mm
            saw band length 2765x 0,9 x 27 mm
            cutting width 300 x 180 mm
            turning speeds 35 + 70 U/min
            total power requirement 1,8 kW
            weight of the machine ca. 450 t
            dimensions of the machine ca. 1,7 x 1,23 x 1,75 m
            Description :
            SPECIAL PRICE!!!
            Double miter metal band saw, frequency converter hydraulic semi-automatic GBS
            250
            Super HA-I Easy
            • miter left 60° + right 45°
            • Material height sensor (automatic cut start detection)
            • Frame and gear made from one piece, very quiet cut and very low vibration
            • Hydraulic vice can be moved sideways a.
            • Guided, high quality industrial bearings
            • Solid vice + machine casting
            • Large machine bed
            • Machine base with tool compartment and chip drawer
            • Cut monitoring by ammeter
            • Cutting pressure feed regulator
            • Support roller (infeed side)
            • Ball bearing turntable

            Semi-automatic function:
            1. Clamp material
            2. Saw starts
            3. Rapid lowering to the start of the material or the same for series cutting
            cut
            4. Saw band off
            5. Raise the frame to just above the material
            6. Open the vise


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal BERG & SCHMID GBS 185 Eco AutoCut


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66207 · Bandsaw - Horizontal

          BERG & SCHMID - GBS 185 Eco AutoCut - - - neu - -

          Technical details
          cutting diameter 185 mm︱saw band length 2.085 x 20 x 0,90 mm︱table height 920 mm︱band speed 30 - 80 m/min︱connected load frequency 400 V︱total power requirement 2,5 kW︱weight of the machine ca. 200 kg︱dimensions of the machine ca. 870 x 1.550 x 1.740 mm mm︱
          ACTION PRICE !!! Berg & Schmid - Metal band saw GBS 185 Eco AutoCut Order no. 20332 Extremely fast and quiet sawing thanks to improved drive technology - Miter cuts up to 60° left - Suitable for dry and wet cutting - Saw band speed 30 - 80 m/min. - Cooling device - Machine base
            cutting diameter 185 mm
            saw band length 2.085 x 20 x 0,90 mm
            table height 920 mm
            band speed 30 - 80 m/min
            connected load frequency 400 V
            total power requirement 2,5 kW
            weight of the machine ca. 200 kg
            dimensions of the machine ca. 870 x 1.550 x 1.740 mm mm
            Description :
            ACTION PRICE !!!
            Berg & Schmid - Metal band saw GBS 185 Eco AutoCut Order no. 20332
            Extremely fast and quiet sawing thanks to improved drive technology
            - Miter cuts up to 60° left
            - Suitable for dry and wet cutting
            - Saw band speed 30 - 80 m/min.
            - Cooling device
            - Machine base




        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal BERG & SCHMID K-tech DG 50/33 HA-I


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66239 · Bandsaw - Horizontal

          BERG & SCHMID - K-tech DG 50/33 HA-I - - - neu - -

          Technical details
          capacity 90 degrees: round 350 mm︱capacity 90 degrees: square 330 mm︱ 500 x 310 ︱band speed 15 - 100 m/min︱table height 844 mm︱dimensions of saw-band 4250 x 34 x 1,1 mm︱total power requirement 2,2 kW︱weight of the machine ca. 1,2 t︱dimensions of the machine ca. 1,4 x 2,4 x 1,935 m︱
          ACTION PRICE!!! 2-column double miter band saw K-tech DG 50/33 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to bevel cut, feed controller + cutting pressure controller • Massive material infeed roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to bevel cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large dimensioned wheels (520 mm) a. • Clear miter setting up to 60° Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise
            capacity 90 degrees: round 350 mm
            capacity 90 degrees: square 330 mm
            500 x 310
            band speed 15 - 100 m/min
            table height 844 mm
            dimensions of saw-band 4250 x 34 x 1,1 mm
            total power requirement 2,2 kW
            weight of the machine ca. 1,2 t
            dimensions of the machine ca. 1,4 x 2,4 x 1,935 m
            Description :
            ACTION PRICE!!!
            2-column double miter band saw K-tech DG 50/33 HA-I
            • 2-column miter saw
            • Solid, yet easy to use
            • Material height sensor (automatic cut start detection)
            • Smooth running thanks to bevel cut, feed controller + cutting pressure
            controller
            • Massive material infeed roller
            • Removable chip tray (disinfection)
            • Energy-saving and low-vibration thanks to bevel cut
            • Ergonomic, safe and free-standing control panel
            • Frequency-controlled saw drive 15 -100 m/min.
            • Hydraulic cutting pressure control valve
            • Hydraulic control of saw frame and vice
            • LEDs for monitoring all safety functions
            • Large dimensioned wheels (520 mm) a.
            • Clear miter setting up to 60°

            Semi-automatic function:
            1. Clamp material
            2. Saw starts
            3. Rapid lowering to the start of the material or the same for series cutting
            cut
            4. Saw band off
            5. Raise the frame to just above the material
            6. Open the vise


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal BERG & SCHMID DGS 350/450 HA-I Easy 34


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66228 · Bandsaw - Horizontal

          BERG & SCHMID - DGS 350/450 HA-I Easy 34 - - - neu - -

          Technical details
          capacity 90 degrees: round 350 mm︱capacity 90 degrees: square 330 mm︱ 450x320 ︱saw band length 4250x34x1,1 mm︱band speed 40 + 80 m/min︱table height 845 mm︱saw band width 34 mm︱total power requirement 2,2 kW︱weight of the machine ca. 0,985 t︱dimensions of the machine ca. 1,4 x 2,0 x 2,2 m︱
          Double miter band saw, hydraulic semi-automatic, DGS 350/450 HA-I · miter left + right 60° without machine conversion · 34 mm saw blade width · Large material support turntable, ball bearings · To position the saw blade guides using a very wide linear guide · Strong, robust transmission · Large chipboards · Infeed and outfeed roller Removable chip tray (disinfection) · Free-standing control panel, safe and ergonomic · Storage space for tapes, consumables · Cutting pressure regulator Feed regulator · Fully hydraulic vise Preload super fast (front loading) · Material height sensor (automatic cut start detection) Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise Optimum, material-independent cutting result through fine adjustment of the saw frame by means of: *Pressure Control Valve (Cutting Pressure Force) *Feed Control Valve (Speed) *Switch with pictogram, easy and clear to use
            capacity 90 degrees: round 350 mm
            capacity 90 degrees: square 330 mm
            450x320
            saw band length 4250x34x1,1 mm
            band speed 40 + 80 m/min
            table height 845 mm
            saw band width 34 mm
            total power requirement 2,2 kW
            weight of the machine ca. 0,985 t
            dimensions of the machine ca. 1,4 x 2,0 x 2,2 m
            Description :
            Double miter band saw, hydraulic semi-automatic, DGS 350/450 HA-I
            · miter left + right 60° without machine conversion
            · 34 mm saw blade width
            · Large material support turntable, ball bearings
            · To position the saw blade guides using a very wide linear guide
            · Strong, robust transmission
            · Large chipboards
            · Infeed and outfeed roller
            Removable chip tray (disinfection)
            · Free-standing control panel, safe and ergonomic
            · Storage space for tapes, consumables
            · Cutting pressure regulator Feed regulator
            · Fully hydraulic vise
            Preload super fast (front loading)
            · Material height sensor (automatic cut start detection)

            Semi-automatic function:
            1. Clamp material
            2. Saw starts
            3. Rapid lowering to the start of the material or the same for series cutting
            cut
            4. Saw band off
            5. Raise the frame to just above the material
            6. Open the vise
            Optimum, material-independent cutting result through fine adjustment of the
            saw frame by means of:
            *Pressure Control Valve (Cutting Pressure Force)
            *Feed Control Valve (Speed)
            *Switch with pictogram, easy and clear to use


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal BERG & SCHMID K-tech DG 62/45 HA-I


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66241 · Bandsaw - Horizontal

          BERG & SCHMID - K-tech DG 62/45 HA-I - - - neu - -

          Technical details
          capacity 90 degrees: round 510 mm︱capacity 90 degrees: square 450 mm︱ 650x450 ︱band speed 15 - 100 m/min︱table height 844 mm︱dimensions of saw-band 5320 x 34 x 1,1 mm︱total power requirement 3,0 kW︱weight of the machine ca. 2,1 t︱dimensions of the machine ca. 1,9 x 2,87 x 1,3 m︱
          PROMOTIONAL PRICE!!! 2-column double miter band saw K-tech DG 62/45 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to diagonal cutting, feed regulator + cutting pressure regulator • Solid material inlet roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to diagonal cutting • Control panel ergonomic, safe and free-standing • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large-sized wheels (520 mm) a. • Clear miter adjustment up to 60° Semi-automatic function: 1. Tension the material 2. Saw starts 3. Lowering in rapid traverse to the beginning of the material or the same for series cutting cut 4. Saw blade off 5. Raise the frame until it is just above the material 6. Vice opens
            capacity 90 degrees: round 510 mm
            capacity 90 degrees: square 450 mm
            650x450
            band speed 15 - 100 m/min
            table height 844 mm
            dimensions of saw-band 5320 x 34 x 1,1 mm
            total power requirement 3,0 kW
            weight of the machine ca. 2,1 t
            dimensions of the machine ca. 1,9 x 2,87 x 1,3 m
            Description :
            PROMOTIONAL PRICE!!!
            2-column double miter band saw K-tech DG 62/45 HA-I
            • 2-column miter saw
            • Solid, yet easy to use
            • Material height sensor (automatic cut start detection)
            • Smooth running thanks to diagonal cutting, feed regulator + cutting pressure
            regulator
            • Solid material inlet roller
            • Removable chip tray (disinfection)
            • Energy-saving and low-vibration thanks to diagonal cutting
            • Control panel ergonomic, safe and free-standing
            • Frequency-controlled saw drive 15 -100 m/min.
            • Hydraulic cutting pressure control valve
            • Hydraulic control of saw frame and vice
            • LEDs for monitoring all safety functions
            • Large-sized wheels (520 mm) a.
            • Clear miter adjustment up to 60°

            Semi-automatic function:
            1. Tension the material
            2. Saw starts
            3. Lowering in rapid traverse to the beginning of the material or the same for
            series cutting cut
            4. Saw blade off
            5. Raise the frame until it is just above the material
            6. Vice opens


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal BERG & SCHMID GBS 305 AutoCut


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66227 · Bandsaw - Horizontal

          BERG & SCHMID - GBS 305 AutoCut - - - neu - -

          Technical details
          capacity 90 degrees: round 305 mm︱capacity 90 degrees: square 260 mm︱ 350 x 200 ︱saw band length 3375 x 27 x 0,9 mm︱band speed 18 - 110 m/min︱table height 940 mm︱total power requirement 1,5/1,8 kW︱weight of the machine ca. 0,61 t︱dimensions of the machine ca. 1,5 x 1,75 x 1,9 m︱
          Double miter metal band saw with AutoCut function - Miter cuts up to 60° left and 45° right - Ball bearing turntable - Vice can be moved sideways - Massive, large material support - Automatic cooling Figure is semi-automatic.
            capacity 90 degrees: round 305 mm
            capacity 90 degrees: square 260 mm
            350 x 200
            saw band length 3375 x 27 x 0,9 mm
            band speed 18 - 110 m/min
            table height 940 mm
            total power requirement 1,5/1,8 kW
            weight of the machine ca. 0,61 t
            dimensions of the machine ca. 1,5 x 1,75 x 1,9 m
            Description :
            Double miter metal band saw with AutoCut function
            - Miter cuts up to 60° left and 45° right
            - Ball bearing turntable
            - Vice can be moved sideways
            - Massive, large material support
            - Automatic cooling

            Figure is semi-automatic.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal BERG & SCHMID GBS 250 Super AutoCut


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66215 · Bandsaw - Horizontal

          BERG & SCHMID - GBS 250 Super AutoCut - - - neu - -

          Technical details
          capacity 90 degrees: round 255 mm︱capacity 90 degrees: square 240 mm︱ 300 x 180 ︱saw band length 2.765 x 27 x 0,9 mm mm︱table height 950 mm︱band speed 35 + 70 m/min︱total power requirement 1,5/1,8 kW︱weight of the machine ca. 0,42 t︱dimensions of the machine ca. 1,23 x 1,7 x 1,75 m︱
          SPECIAL PRICE!!! Double miter metal band saw hydraulic semi-automatic with: - Hydraulic vice - Material height button - Cut monitoring by ammeter - Cutting pressure feed regulator - Belt speed 25 - 90 m/min - Miter cuts up to 60° left and 45° right - Patented, ball-bearing turntable for easy miter adjustment - Adjustable quick-release vise - Quick release lever - Automatic cooling
            capacity 90 degrees: round 255 mm
            capacity 90 degrees: square 240 mm
            300 x 180
            saw band length 2.765 x 27 x 0,9 mm mm
            table height 950 mm
            band speed 35 + 70 m/min
            total power requirement 1,5/1,8 kW
            weight of the machine ca. 0,42 t
            dimensions of the machine ca. 1,23 x 1,7 x 1,75 m
            Description :
            SPECIAL PRICE!!!
            Double miter metal band saw hydraulic semi-automatic with:
            - Hydraulic vice
            - Material height button
            - Cut monitoring by ammeter
            - Cutting pressure feed regulator
            - Belt speed 25 - 90 m/min
            - Miter cuts up to 60° left and 45° right
            - Patented, ball-bearing turntable for easy miter adjustment
            - Adjustable quick-release vise
            - Quick release lever
            - Automatic cooling



        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal BERG & SCHMID GBS 250 Super HA-I Easy


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66219 · Bandsaw - Horizontal

          BERG & SCHMID - GBS 250 Super HA-I Easy - - - neu - -

          Technical details
          capacity 90 degrees: round 255 mm︱capacity 90 degrees: square 240 mm︱ 300 x 180 ︱saw band length 2.765 x 27 x 0,9 mm mm︱table height 950 mm︱band speed 18 - 110 m/min︱total power requirement 1,5 kW︱weight of the machine ca. 0,42 t︱dimensions of the machine ca. 1,23 x 1,7 x 1,75 m︱
          SPECIAL PRICE!!! Double miter metal band saw, frequency converter hydraulic semi-automatic GBS 250 Super HA-I Easy • miter left 60° + right 45° • Material height sensor (automatic cut start detection) • Frame and gear made from one piece, very quiet cut and very low vibration • Hydraulic vice can be moved sideways a. • Guided, high quality industrial bearings • Solid vice + machine casting • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring by ammeter • Cutting pressure feed regulator • Support roller (infeed side) • Ball bearing turntable Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise
            capacity 90 degrees: round 255 mm
            capacity 90 degrees: square 240 mm
            300 x 180
            saw band length 2.765 x 27 x 0,9 mm mm
            table height 950 mm
            band speed 18 - 110 m/min
            total power requirement 1,5 kW
            weight of the machine ca. 0,42 t
            dimensions of the machine ca. 1,23 x 1,7 x 1,75 m
            Description :
            SPECIAL PRICE!!!
            Double miter metal band saw, frequency converter hydraulic semi-automatic
            GBS 250 Super HA-I Easy
            • miter left 60° + right 45°
            • Material height sensor (automatic cut start detection)
            • Frame and gear made from one piece, very quiet cut and very low vibration
            • Hydraulic vice can be moved sideways a.
            • Guided, high quality industrial bearings
            • Solid vice + machine casting
            • Large machine bed
            • Machine base with tool compartment and chip drawer
            • Cut monitoring by ammeter
            • Cutting pressure feed regulator
            • Support roller (infeed side)
            • Ball bearing turntable

            Semi-automatic function:
            1. Clamp material
            2. Saw starts
            3. Rapid lowering to the start of the material or the same for series cutting
            cut
            4. Saw band off
            5. Raise the frame to just above the material
            6. Open the vise


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal BERG & SCHMID DGS 500/600 HA-I


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66230 · Bandsaw - Horizontal

          BERG & SCHMID - DGS 500/600 HA-I - - - neu - -

          Technical details
          capacity 90 degrees: round 500 mm︱capacity 90 degrees: square 420 mm︱ 600x400 ︱saw band length 5320x34x1,1 mm︱band speed 15 - 100 m/min︱table height 805 mm︱total power requirement 3,0 kW︱weight of the machine ca. 1,45 t︱dimensions of the machine ca. 1,72 x 2,5 x 2,5 m︱
          Double miter band saw, hydraulic semi-automatic, DGS 500/600 HA-I • miter left + right 60° • Frequency-controlled saw drive • 34 mm saw band height • Wear-free material support turntable, ball-bearing • To position the saw blade guides using a very wide linear guide • Strong, robust gearbox • Large chipboards • 2 integrated support rollers left and right • Removable chip tray (disinfection) • Free-standing control panel, safe and ergonomic • Storage space for tapes, consumables • Hydraulic cutting pressure control valve • Material height sensor (automatic cut start detection) • Preload super fast (front loading) • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Minimum cutting range from around 10 mm Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise
            capacity 90 degrees: round 500 mm
            capacity 90 degrees: square 420 mm
            600x400
            saw band length 5320x34x1,1 mm
            band speed 15 - 100 m/min
            table height 805 mm
            total power requirement 3,0 kW
            weight of the machine ca. 1,45 t
            dimensions of the machine ca. 1,72 x 2,5 x 2,5 m
            Description :
            Double miter band saw, hydraulic semi-automatic, DGS 500/600 HA-I
            • miter left + right 60°
            • Frequency-controlled saw drive
            • 34 mm saw band height
            • Wear-free material support turntable, ball-bearing
            • To position the saw blade guides using a very wide linear guide
            • Strong, robust gearbox
            • Large chipboards
            • 2 integrated support rollers left and right
            • Removable chip tray (disinfection)
            • Free-standing control panel, safe and ergonomic
            • Storage space for tapes, consumables
            • Hydraulic cutting pressure control valve
            • Material height sensor (automatic cut start detection)
            • Preload super fast (front loading)
            • Hydraulic control of saw frame and vice
            • LEDs for monitoring all safety functions
            • Minimum cutting range from around 10 mm

            Semi-automatic function:
            1. Clamp material
            2. Saw starts
            3. Rapid lowering to the start of the material or the same for series cutting
            cut
            4. Saw band off
            5. Raise the frame to just above the material
            6. Open the vise


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal BERG & SCHMID GBS 250 Super AutoCut


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66216 · Bandsaw - Horizontal

          BERG & SCHMID - GBS 250 Super AutoCut - - - neu - -

          Technical details
          capacity 90 degrees: round 255 mm︱capacity 90 degrees: square 240 mm︱ 300 x 180 ︱saw band length 2.765 x 27 x 0,9 mm mm︱table height 950 mm︱band speed 18 - 110 m/min︱total power requirement 1,5/1,8 kW︱weight of the machine ca. 0,42 t︱
          Double miter metal band saw, GBS 250 Super AutoCut - Miter cuts up to 60° left and 45° right - Ball bearing turntable - Quick release vice - Massive, large material support - Automatic cooling
            capacity 90 degrees: round 255 mm
            capacity 90 degrees: square 240 mm
            300 x 180
            saw band length 2.765 x 27 x 0,9 mm mm
            table height 950 mm
            band speed 18 - 110 m/min
            total power requirement 1,5/1,8 kW
            weight of the machine ca. 0,42 t
            Description :
            Double miter metal band saw, GBS 250 Super AutoCut
            - Miter cuts up to 60° left and 45° right
            - Ball bearing turntable
            - Quick release vice
            - Massive, large material support
            - Automatic cooling



        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal BERG & SCHMID GBS 305 HA-I Easy


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66221 · Bandsaw - Horizontal

          BERG & SCHMID - GBS 305 HA-I Easy - - - neu - -

          Technical details
          capacity 90 degrees: round 305 mm︱capacity 90 degrees: square 260 mm︱ 350x200 ︱saw band length 3375x27x0,9 mm︱band speed 18 - 100 m/min︱table height 940 mm︱total power requirement 1,5 kW︱weight of the machine ca. 0,65 t︱dimensions of the machine ca. 1,5 x 1,75 x 1,9 m︱
          SPECIAL PRICE!!! Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy - Miter cuts up to 60° left and 45° right - Material height button - Ball bearing turntable - hydraulic Vice, laterally displaceable - Massive, large material support - Automatic cooling
            capacity 90 degrees: round 305 mm
            capacity 90 degrees: square 260 mm
            350x200
            saw band length 3375x27x0,9 mm
            band speed 18 - 100 m/min
            table height 940 mm
            total power requirement 1,5 kW
            weight of the machine ca. 0,65 t
            dimensions of the machine ca. 1,5 x 1,75 x 1,9 m
            Description :
            SPECIAL PRICE!!!
            Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy
            - Miter cuts up to 60° left and 45° right
            - Material height button
            - Ball bearing turntable
            - hydraulic Vice, laterally displaceable
            - Massive, large material support
            - Automatic cooling


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal BERG & SCHMID GBS 305 HA-I Easy


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66220 · Bandsaw - Horizontal

          BERG & SCHMID - GBS 305 HA-I Easy - - - neu - -

          Technical details
          capacity 90 degrees: round 305 mm︱capacity 90 degrees: square 260 mm︱ 350x200 ︱saw band length 3375x27x0,9 mm︱band speed 37 + 74 m/min︱table height 940 mm︱total power requirement 1,5/1,8 kW︱weight of the machine ca. 0,65 t︱dimensions of the machine ca. 1,5 x 1,75 x 1,9 m︱
          SPECIAL PRICE!!! Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy - Miter cuts up to 60° left and 45° right - Material height button - Ball bearing turntable - hydraulic Vice, laterally displaceable - Massive, large material support - Automatic cooling
            capacity 90 degrees: round 305 mm
            capacity 90 degrees: square 260 mm
            350x200
            saw band length 3375x27x0,9 mm
            band speed 37 + 74 m/min
            table height 940 mm
            total power requirement 1,5/1,8 kW
            weight of the machine ca. 0,65 t
            dimensions of the machine ca. 1,5 x 1,75 x 1,9 m
            Description :
            SPECIAL PRICE!!!
            Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy
            - Miter cuts up to 60° left and 45° right
            - Material height button
            - Ball bearing turntable
            - hydraulic Vice, laterally displaceable
            - Massive, large material support
            - Automatic cooling


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal MEP SHARK 281 SXI EVO


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66325 · Bandsaw - Horizontal

          MEP - SHARK 281 SXI EVO - - -

          Technical details
          cutting diameter 250 mm︱capacity 90 degrees: flat 280 x 220 mm︱capacity 90 degrees: square 220 x 220 mm︱turning speed range: 36 / 72 m/min︱dimensions of saw-band 2950 x 25,4 x 0,9 mm︱weight of the machine ca. 0,4 t︱Dimensions (LxWxH) 1,5 x 0,9 x 1,5
          Semi-automatic function: Vice closes and motor starts, saw head lowers for the cut, motor switches off, saw head rises, Vise opens. Some features: New centralized switch console on an articulated arm. Latest generation hydraulic control unit, highly powerful and with low energy consumption. Base frame with pull-out coolant container. The machine complies in all areas CE regulations!
            cutting diameter 250 mm
            capacity 90 degrees: flat 280 x 220 mm
            capacity 90 degrees: square 220 x 220 mm
            turning speed range: 36 / 72 m/min
            dimensions of saw-band 2950 x 25,4 x 0,9 mm
            weight of the machine ca. 0,4 t
            Dimensions (LxWxH) 1,5 x 0,9 x 1,5
            Description :
            Semi-automatic function:
            Vice closes and motor starts, saw head lowers
            for the cut, motor switches off, saw head rises,
            Vise opens.
            Some features:
            New centralized switch console on an articulated arm.
            Latest generation hydraulic control unit, highly powerful and
            with low energy consumption.
            Base frame with pull-out coolant container.
            The machine complies in all areas CE regulations!


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal IMET BS 280 Plus


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-38735 · Bandsaw - Horizontal

          IMET - BS 280 Plus - - -

          Technical details
          capacity 90 degrees: round 230 mm︱capacity 90 degrees: square 230 mm︱ 280 x 150 ︱band speed 35/70 m/min︱saw band length 2770 x 27 x 0,9 mm︱total power requirement 1,5/1,8 kW︱weight of the machine ca. 0,37 kg︱Dimensions (LxWxH) 1,5 x 1,2 x 1,3 0︱
          Double miter band saws - Semi-automatic - Miter 45° / 60° with new engine and gearbox Completely overhauled!
            capacity 90 degrees: round 230 mm
            capacity 90 degrees: square 230 mm
            280 x 150
            band speed 35/70 m/min
            saw band length 2770 x 27 x 0,9 mm
            total power requirement 1,5/1,8 kW
            weight of the machine ca. 0,37 kg
            Dimensions (LxWxH) 1,5 x 1,2 x 1,3 0
            Description :
            Double miter band saws
            - Semi-automatic
            - Miter 45° / 60°
            with new engine and gearbox
            Completely overhauled!


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal BIANCO 420 M DS MS SA


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-674 · Bandsaw - Horizontal

          BIANCO - 420 M DS MS SA - - -

          Technical details
          neuca. 10 Wochen ab AuftragsItalien11070 €︱ 226.94 €︱ Schwenkrahmen3270x27x0,9 mm︱ 35/70 m/min︱ 280 mm︱ 240 mm︱ 420x200 mm︱ rund 260 mm, quadrat 240 rund 170 mm, quadrat 160 rund 200 mm, quadrat 180 830 mm︱ 1600 mm︱ 1400 mm︱ 1800 mm︱ 438 kg︱
          manual vice with lever for quick clamping gravity downfeed with adjustable damper 2 speeds coolant equipment
            neu
            ca. 10 Wochen ab Auftrags
            Italien
            11070 €
            226.94 €
            Schwenkrahmen
            3270x27x0,9 mm
            35/70 m/min
            280 mm
            240 mm
            420x200 mm
            rund 260 mm, quadrat 240
            rund 170 mm, quadrat 160
            rund 200 mm, quadrat 180
            830 mm
            1600 mm
            1400 mm
            1800 mm
            438 kg
            Description :
            manual vice with lever for quick clamping
            gravity downfeed with adjustable damper
            2 speeds
            coolant equipment


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal ZIMMER Z185/R


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04495 · Bandsaw - Horizontal

          ZIMMER - Z185/R - - -

          Technical details
          cutting diameter 185 mm︱saw band length 2.080 x 20 x 0,90 mm︱cutting width 100x185 mm︱connected load frequency 230 V︱band speed 35 und 70 stufenlos m/min︱mitre joint 90° (angle-iron till) 60 °︱total power requirement 2,35 KW︱weight of the machine ca. 195 kg︱dimensions of the machine ca. 1280 x 550 x 1480 mm︱
          We must ask you to request machines from us on a daily basis in the near future. Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. An inexpensive and powerful band saw for sporadic workshop use The Zimmer Z185 / R is a self-lowering saw for miter cuts from 0 ° - 60 ° left. After the cut, the machine stops due to a safety limit switch. The lowering is continuously adjustable via a hydraulic system. The manual lifting of the saw arm after the cut can - on any Position. The saw arm remains in the desired position. * Metal band saw with stepless electronic speed regulation and automatic lowering * Selector switch for hydraulically controlled or manual belt arm lowering * Saw arm can be swiveled up to 60 ° to the right * Quick release vice * Tape guide with 8 ball bearings * Hydraulic saw band tensioning with tensioning pressure display and cut off of the band breakage * including coolant device * including machine base cabinet The Z185 / R has the following standard equipment: - hydraulic cylinders - emulsion pump - eccentric clamp - underframe - saw band The machine is fully assembled and delivered immediately ready for use Technical specifications: Motor power: 230 V / 2.35 kW Cutting speed: 30 - 75 m / min. stepless Saw band dimensions: 2.085 x 20x 0.9 mm Footprint: 550 x 1,280 x 1,480 mm Working height: 915 mm Weight: 190 kg
            cutting diameter 185 mm
            saw band length 2.080 x 20 x 0,90 mm
            cutting width 100x185 mm
            connected load frequency 230 V
            band speed 35 und 70 stufenlos m/min
            mitre joint 90° (angle-iron til. 60 °
            total power requirement 2,35 KW
            weight of the machine ca. 195 kg
            dimensions of the machine ca. 1280 x 550 x 1480 mm
            Description :
            We must ask you to request machines from us on a daily basis in the near future.

            Please notice:
            We would be happy to make you a free offer. However, please understand that we
            only process inquiries with complete address details.


            An inexpensive and powerful band saw for sporadic workshop use

            The Zimmer Z185 / R is a self-lowering saw for miter cuts from 0 ° -
            60 ° left.
            After the cut, the machine stops due to a safety limit switch.
            The lowering is continuously adjustable via a hydraulic system.
            The manual lifting of the saw arm after the cut can - on any
            Position. The saw arm remains in the desired position.

            * Metal band saw with stepless electronic speed regulation and
            automatic lowering
            * Selector switch for hydraulically controlled or manual belt arm lowering
            * Saw arm can be swiveled up to 60 ° to the right
            * Quick release vice
            * Tape guide with 8 ball bearings
            * Hydraulic saw band tensioning with tensioning pressure display and cut off of
            the band breakage
            * including coolant device
            * including machine base cabinet

            The Z185 / R has the following standard equipment:

            - hydraulic cylinders
            - emulsion pump
            - eccentric clamp
            - underframe
            - saw band

            The machine is fully assembled and delivered immediately ready for use

            Technical specifications:
            Motor power: 230 V / 2.35 kW
            Cutting speed: 30 - 75 m / min. stepless
            Saw band dimensions: 2.085 x 20x 0.9 mm
            Footprint: 550 x 1,280 x 1,480 mm
            Working height: 915 mm
            Weight: 190 kg



        • Schmeisser Werkzeugmaschinen
        • Lochfelbenstrasse 2
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal PEHAKA ROB 400


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-ZA413 · Bandsaw - Horizontal

          PEHAKA - ROB 400 - - -

          Technical details
          cutting diameter - mm︱saw band length - mm︱cutting width - mm︱capacity 450 mm︱dimensions of the machine ca. 2.700 x 1.100 x 1.000 m︱
          Brand Pehaka Type ROB 400 Horizontal Fully automatic Capacity 450 mm Hydraulic lowering Machine size (lxwxh) 2.700 x 1.100 x 1.000 mm
            cutting diameter - mm
            saw band length - mm
            cutting width - mm
            capacity 450 mm
            dimensions of the machine ca. 2.700 x 1.100 x 1.000 m
            Description :
            Brand Pehaka
            Type ROB 400
            Horizontal
            Fully automatic
            Capacity 450 mm
            Hydraulic lowering
            Machine size (lxwxh) 2.700 x 1.100 x 1.000 mm


        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal BEHRINGER HBP 420


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-ZA416 · Bandsaw - Horizontal

          BEHRINGER - HBP 420 - - -

          Technical details
          cutting diameter - mm︱saw band length - mm︱cutting width - mm︱capacity 420 mm︱capacity 420 around mm︱dimensions of the machine ca. 3.200 x 1.600 x 2.200 mm︱
          Brand Behringer Type HBP 420 Horizontal Semi-automatic Capacity 420 mm Capacity around 420 mm Absent 45 ° Variably adjustable speed Hydraulic clamping Hydraulic lowering Machine size (lxwxh) 3.200 x 1.600 x 2.200 mm
            cutting diameter - mm
            saw band length - mm
            cutting width - mm
            capacity 420 mm
            capacity 420 around mm
            dimensions of the machine ca. 3.200 x 1.600 x 2.200 mm
            Description :
            Brand Behringer
            Type HBP 420
            Horizontal
            Semi-automatic
            Capacity 420 mm
            Capacity around 420 mm
            Absent 45 °
            Variably adjustable speed
            Hydraulic clamping
            Hydraulic lowering
            Machine size (lxwxh) 3.200 x 1.600 x 2.200 mm


        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal BIANCO 420 M SA


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-684 · Bandsaw - Horizontal

          BIANCO - 420 M SA - - -

          Technical details
          neuca. 10 Wochen ab AuftragsItalien9080 €︱ 187.96 €︱ Schwenkrahmen3270x27x0,9 mm︱ 35/70 m/min︱ 300 mm︱ 240 mm︱ 420x200 mm︱ rund 240 mm, quadrat 230 rund 170 mm, quadrat 170 830 mm︱ 1600 mm︱ 1400 mm︱ 1950 mm︱ 356 kg︱
          manual vice with lever for quick clamping gravity downfeed with adjustable damper 2 speeds coolant equipment
            neu
            ca. 10 Wochen ab Auftrags
            Italien
            9080 €
            187.96 €
            Schwenkrahmen
            3270x27x0,9 mm
            35/70 m/min
            300 mm
            240 mm
            420x200 mm
            rund 240 mm, quadrat 230
            rund 170 mm, quadrat 170
            830 mm
            1600 mm
            1400 mm
            1950 mm
            356 kg
            Description :
            manual vice with lever for quick clamping
            gravity downfeed with adjustable damper
            2 speeds
            coolant equipment


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal BIANCO 370 M DS MS SA


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-670 · Bandsaw - Horizontal

          BIANCO - 370 M DS MS SA - - -

          Technical details
          neuca. 10 Wochen ab AuftragsItalien10370 €︱ 212.59 €︱ Schwenkrahmen3120 mm︱ 35/70 m/min︱ 280 mm︱ 240 mm︱ 350x140 mm︱ rund 230 mm, quadrat 200 rund 150 mm, quadrat 130 rund 200 mm, quadrat 170 830 mm︱ 1550 mm︱ 1400 mm︱ 1750 mm︱ 420 kg︱
          manual vice with lever for quick clamping gravity downfeed with adjustable damper 2 speeds coolant equipment digital readout for mitre cuts
            neu
            ca. 10 Wochen ab Auftrags
            Italien
            10370 €
            212.59 €
            Schwenkrahmen
            3120 mm
            35/70 m/min
            280 mm
            240 mm
            350x140 mm
            rund 230 mm, quadrat 200
            rund 150 mm, quadrat 130
            rund 200 mm, quadrat 170
            830 mm
            1550 mm
            1400 mm
            1750 mm
            420 kg
            Description :
            manual vice with lever for quick clamping
            gravity downfeed with adjustable damper
            2 speeds
            coolant equipment
            digital readout for mitre cuts


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal BIANCO 370 M SA


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-666 · Bandsaw - Horizontal

          BIANCO - 370 M SA - - -

          Technical details
          neuca. 10 Wochen ab AuftragsItalien8680 €︱ 179.68 €︱ Schwenkrahmen3120x27x0,9 mm︱ 35/70 m/min︱ 280 mm︱ 240 mm︱ 370x140 mm︱ rund 225 mm, quadrat 215 rund 140 mm, quadrat 140 830 mm︱ 1550 mm︱ 1400 mm︱ 1900 mm︱ 353 kg︱
          manual vice with lever for quick clamping gravity downfeed with adjustable damper 2 speeds coolant equipment
            neu
            ca. 10 Wochen ab Auftrags
            Italien
            8680 €
            179.68 €
            Schwenkrahmen
            3120x27x0,9 mm
            35/70 m/min
            280 mm
            240 mm
            370x140 mm
            rund 225 mm, quadrat 215
            rund 140 mm, quadrat 140
            830 mm
            1550 mm
            1400 mm
            1900 mm
            353 kg
            Description :
            manual vice with lever for quick clamping
            gravity downfeed with adjustable damper
            2 speeds
            coolant equipment


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          •   
          •