European network of stockholding machinery dealers

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:

          Center Grinding Machine

          Machinelist: Center Grinding Machine


          Center Grinding Machine

          used Grinding machines Center Grinding Machine HENNINGER ZS 150x2500


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-554229 · Center Grinding Machine

          HENNINGER - ZS 150x2500 - - 1983 -

          Technical details
          workpiece diameter 110 mm︱grinding depth 60 mm︱clamping length 2500 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            workpiece diameter 110 mm
            grinding depth 60 mm
            clamping length 2500 mm


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Center Grinding Machine REM ohne


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-770157 · Center Grinding Machine

          REM - ohne - - 1978 -

          Technical details
          workpiece diameter 100 mm︱grinding depth 50 mm︱clamping length 1000 mm︱total power requirement 0,5 kW︱weight of the machine ca. 0,4 t︱dimensions of the machine ca. m︱
            workpiece diameter 100 mm
            grinding depth 50 mm
            clamping length 1000 mm
            total power requirement 0,5 kW
            weight of the machine ca. 0,4 t


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Center Grinding Machine TECHNICA ZSM 1000


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-433419 · Center Grinding Machine

          TECHNICA - ZSM 1000 - - 1975 -

          Technical details
          workpiece diameter 8-125 mm︱grinding depth 130 mm︱clamping length 50-1100 mm︱max. workpiece diameter 0 mm︱min. workpiece diameter 0 mm︱workpiece length mm︱total power requirement 1 kW︱weight of the machine ca. 500 kg︱dimensions of the machine ca. m︱
          T E C H N I C A (Switzerland) Centre Hole Grinding Machine Model ZSM 1000 Year approx. 1975 Serial No. J 1400 _______________________________________________________ Distance between centres 50 – 1,100 mm Height of centres 145 mm Workpiece Ø 8 – 125 mm Max. centre hole taper Ø 2 – 50 mm Max. centre hole taper angle 60 ° Clamping range of vice 4 – 150 mm Stroke of grinding head 130 mm Stroke of grinding tool on workpiece 0.75 – 5 mm Grinding tool Ø 15 – 60 mm Grinding spindle speeds 13,000 – 45,000 rpm Workpiece drive 0 rpm Total electrical load, approx. 0.5 kW - 380 V - 50 Hz Weight, approx. 500 kg Accessories / Special Features: * A cone shaped grinding wheel is employed, but it is only in line contact with the centrehole surface, in addition it is reciprocating simultaneously along this line. * The workpiece remains stationary, enabling the procuction of perfect centre holes. * To clamp cylindrical Workpieces one uses a height adjustable 2 jaw chuck which gives three point contact and always coincides with the center of the grinding spindle. * Height-adjustable workpiece centering tool with carbide inserts. Manual adjustment of appropriate workpiece diameter with a rachet coupling. * Manual dressing device, mounted on the side of the grinding spindle, stroke approx. 40 mm, for producing a geometrically exact conical form. * Pre-centering device for Workpiece only partially available. * Height-adjustable tailstock and bore in machine base allow longer workpieces. Condition : average to good/should be reconditioned. Machine can be inspected under power. Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract
            workpiece diameter 8-125 mm
            grinding depth 130 mm
            clamping length 50-1100 mm
            total power requirement 1 kW
            weight of the machine ca. 500 kg
            Description :
            T E C H N I C A (Switzerland)
            Centre Hole Grinding Machine Model ZSM 1000
            Year approx. 1975 Serial No. J 1400
            _______________________________________________________
            Distance between centres 50 – 1,100 mm
            Height of centres 145 mm
            Workpiece Ø 8 – 125 mm

            Max. centre hole taper Ø 2 – 50 mm
            Max. centre hole taper angle 60 °

            Clamping range of vice 4 – 150 mm

            Stroke of grinding head 130 mm
            Stroke of grinding tool on workpiece 0.75 – 5 mm

            Grinding tool Ø 15 – 60 mm
            Grinding spindle speeds 13,000 – 45,000 rpm
            Workpiece drive 0 rpm

            Total electrical load, approx. 0.5 kW - 380 V - 50 Hz
            Weight, approx. 500 kg

            Accessories / Special Features:

            * A cone shaped grinding wheel is employed, but it is only in line
            contact with the centrehole surface, in addition it is reciprocating
            simultaneously along this line.
            * The workpiece remains stationary, enabling the procuction of perfect
            centre holes.
            * To clamp cylindrical Workpieces one uses a height adjustable 2 jaw chuck
            which gives three point contact and always coincides with the center of
            the grinding spindle.
            * Height-adjustable workpiece centering tool with carbide inserts.
            Manual adjustment of appropriate workpiece diameter with a rachet
            coupling.
            * Manual dressing device, mounted on the side of the grinding spindle,
            stroke approx. 40 mm, for producing a geometrically exact conical form.
            * Pre-centering device for Workpiece only partially available.
            * Height-adjustable tailstock and bore in machine base allow longer
            workpieces.

            Condition : average to good/should be reconditioned.
            Machine can be inspected under power.
            Delivery : Ex stock, as inspected
            Payment : Net, after conclusion of contract



        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Center Grinding Machine TECHNIKA ZSM 5100-2000


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-751968 · Center Grinding Machine

          TECHNIKA - ZSM 5100-2000 - - 1975 -

          Technical details
          workpiece diameter 125 mm︱grinding depth 50 mm︱clamping length 2000 mm︱total power requirement 0,5 kW︱weight of the machine ca. 1000 kg︱dimensions of the machine ca. m︱
          T E C H N I C A (Switzerland) Centre Hole Grinding Machine Model ZSM 5100 – 2.000 Year approx.. 1975 S/N 66 32 7872 – J 3278 _______________________________________________________ Distance between centres 50 – 2.000 mm Height of centres approx. 125 mm Workpiece Ø in clamping Vice 8 – 125 mm Swing of workpiece over tailstockguide 290 mm Swing of Workpiece max. over grinding head pillar 300 mm Max.weight of workpiece 250 kg Max. centre hole taper Ø 2 – 50 mm Max. centre hole taper angle 60 ° Clamping range of vice approx. 5 – 160 mm Grinding head adjustable in vertical axis 160 mm Stroke of grinding tool on workpiece 0.75 – 5 mm Grinding tool Ø 15 – 60 mm Grinding spindle speeds 13,000 – 45,000 rpm Total electrical load, approx. 1 kW - 380 V - 50 Hz Weight, approx. 1.000 kg Accessories / Special Features Machine is suitable for workpiece length up to 2.000 mm with a basement extension * A cone shaped grinding wheel is employed, but it is only in line contact with the centrehole surface, in addition it is reciprocating simultaneously along this line. The workpiece remains stationary, enabling the generation of perfect centre holes. * To clamp cylindrical Workpieces one uses a height adjustable 2 jaw vice which gives three point contact and always coincides with the center of the grinding spindle. * Height-adjustable workpiece centering vice with carbide inserts. Manual adjustment of appropriate workpiece diameter with clamping screw. * Dressing device, mounted on the side of the grinding spindle, stroke approx. 40 mm, for producing a geometrically exact conical form and with oscillation of diamond tool. * Pre-centering device for Workpiece adjustment between centers. * Pneumatic Oil Lubrification of grinding spindle by oil-mist. * Manually adjustable Tailstock with handwheel but without motorized drive. Condition : Good to very good. Machine can be inspected under power. Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract
            workpiece diameter 125 mm
            grinding depth 50 mm
            clamping length 2000 mm
            total power requirement 0,5 kW
            weight of the machine ca. 1000 kg
            Description :
            T E C H N I C A (Switzerland)
            Centre Hole Grinding Machine
            Model ZSM 5100 – 2.000
            Year approx.. 1975 S/N 66 32 7872 – J 3278
            _______________________________________________________

            Distance between centres 50 – 2.000 mm
            Height of centres approx. 125 mm
            Workpiece Ø in clamping Vice 8 – 125 mm
            Swing of workpiece over tailstockguide 290 mm
            Swing of Workpiece max. over grinding head pillar 300 mm
            Max.weight of workpiece 250 kg

            Max. centre hole taper Ø 2 – 50 mm
            Max. centre hole taper angle 60 °

            Clamping range of vice approx. 5 – 160 mm

            Grinding head adjustable in vertical axis 160 mm
            Stroke of grinding tool on workpiece 0.75 – 5 mm

            Grinding tool Ø 15 – 60 mm
            Grinding spindle speeds 13,000 – 45,000 rpm

            Total electrical load, approx. 1 kW - 380 V - 50 Hz
            Weight, approx. 1.000 kg

            Accessories / Special Features
            Machine is suitable for workpiece length up to 2.000 mm
            with a basement extension
            * A cone shaped grinding wheel is employed, but it is only in line contact
            with the centrehole surface, in addition it is reciprocating
            simultaneously along this line.
            The workpiece remains stationary, enabling the generation of perfect
            centre holes.
            * To clamp cylindrical Workpieces one uses a height adjustable 2 jaw vice
            which gives three point contact and always coincides with the center of
            the grinding spindle.
            * Height-adjustable workpiece centering vice with carbide inserts.
            Manual adjustment of appropriate workpiece diameter with clamping screw.
            * Dressing device, mounted on the side of the grinding spindle, stroke
            approx. 40 mm, for producing a geometrically exact conical form and with
            oscillation of diamond tool.
            * Pre-centering device for Workpiece adjustment between centers.
            * Pneumatic Oil Lubrification of grinding spindle by oil-mist.
            * Manually adjustable Tailstock with handwheel but without motorized drive.

            Condition : Good to very good. Machine can be inspected under power.
            Delivery : Ex stock, as inspected
            Payment : Net, after conclusion of contract




        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Center Grinding Machine WMW SIXZB 60-1000LQ


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E1990 · Center Grinding Machine

          WMW - SIXZB 60-1000LQ - - -

          Technical details
          workpiece diameter 60 mm︱grinding depth 30 mm︱clamping length 1000 mm︱total power requirement kW︱weight of the machine ca. 0,6 t︱dimensions of the machine ca. 0,5 x 0,5 x 2,1 m︱
            workpiece diameter 60 mm
            grinding depth 30 mm
            clamping length 1000 mm
            weight of the machine ca. 0,6 t
            dimensions of the machine ca. 0,5 x 0,5 x 2,1 m


        • Emuk Maschinenhandel GmbH
        • Siemensstrasse 24
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Center Grinding Machine TECHNICA (SCHWEIZ) ZSM  5100


          • Marcels Maschinen AG
          • Anthoptstrasse 11
          • 8222 Beringen (Schaffhausen)
          • Schweiz

          • (0041) 44 872 3400
            (0041) 44 872 3403
          • info@marcels-maschinen.ch
            http://www.marcels-maschinen.ch
          #1065-4996 · Center Grinding Machine

          TECHNICA (SCHWEIZ) - ZSM 5100 - - -

          Technical details
          center hole 2-50 mm︱workpiece diameter 8-125 mm︱workpiece length - min. 50 mm︱workpiece length - max. 1000 mm︱column - center height 145 mm︱grinding wheel speeds: ︱number 3 ︱from/to 13000-45000 U/min︱spindle turning speed range 400 U/min︱dimensions of the machine ca. 750x850x1800 mm︱weight of the machine ca. 475 kg︱
            center hole 2-50 mm
            workpiece diameter 8-125 mm
            workpiece length - min. 50 mm
            workpiece length - max. 1000 mm
            column - center height 145 mm
            number 3
            from/to 13000-45000 U/min
            spindle turning speed range 400 U/min
            dimensions of the machine ca. 750x850x1800 mm
            weight of the machine ca. 475 kg


        • Marcels Maschinen AG
        • Anthoptstrasse 11
        • 8222 Beringen (Schaffhausen)
        • Schweiz

        • Datasheet
          Request / Contact
          used Grinding machines Center Grinding Machine KLEIN ZSS


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E22032 · Center Grinding Machine

          KLEIN - ZSS - - -

          Technical details
          workpiece diameter 30 - 325 mm︱grinding depth 60 mm︱clamping length 1000 mm︱center hole 1 - 30 mm︱total power requirement kW︱weight of the machine ca. 0,2 t︱dimensions of the machine ca. 0,5 x 0,5 x 1,7 m︱
            workpiece diameter 30 - 325 mm
            grinding depth 60 mm
            clamping length 1000 mm
            center hole 1 - 30 mm
            weight of the machine ca. 0,2 t
            dimensions of the machine ca. 0,5 x 0,5 x 1,7 m


        • Emuk Maschinenhandel GmbH
        • Siemensstrasse 24
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Center Grinding Machine TECHNICA 5100-810


          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland

          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-20193 · Center Grinding Machine

          TECHNICA - 5100-810 - - -

          Technical details
          workpiece diameter 150 mm︱grinding depth 5,0 mm︱workpiece length 1.100 mm︱grinding spindle speed 45.000 U/min︱voltage 380 V︱total power requirement 0,5 kW︱weight of the machine ca. 490 kg︱dimensions of the machine ca. 1,00 x 0,85 x 1,85 m︱suction device 0,40 x 0,75 x 0,60 m︱
          - Serial-No.: J20720-89 - Machine ON: 3.680 h - Workpiece drive - Dressing device - Suction
            workpiece diameter 150 mm
            grinding depth 5,0 mm
            workpiece length 1.100 mm
            grinding spindle speed 45.000 U/min
            voltage 380 V
            total power requirement 0,5 kW
            weight of the machine ca. 490 kg
            dimensions of the machine ca. 1,00 x 0,85 x 1,85 m
            suction device 0,40 x 0,75 x 0,60 m
            Description :
            - Serial-No.: J20720-89
            - Machine ON: 3.680 h
            - Workpiece drive
            - Dressing device
            - Suction


        • Kirchgeorg Werkzeugmaschinen
        • Frankfurter Straße 141
        • 63303 Dreieich-Sprendlingen
        • Deutschland

        • Datasheet
          Request / Contact

          Surface Grinding Machine - Horizontal

          used Grinding machines Surface Grinding Machine - Horizontal MAEGERLE F 10


          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland

          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-10020 · Surface Grinding Machine - Horizontal

          MAEGERLE - F 10 - - unbekannt -

          Technical details
          grinding length 1000 mm︱grinding width 300 mm︱workpiece height 230 mm︱table surface area 1000 x 240 mm︱x-travel 1000 mm︱y-travel 270 mm︱z-travel 350 mm︱grinding wheel diameter 240 mm︱grinding spindle speed 2180 U/min︱table speed -stepless- 3 - 30 m/min︱total power requirement 4,5 kW︱weight of the machine ca. 2,8 t︱dimensions of machine L x W x H 2,36 x 1,37 x 2,0 m︱
          Accessories: magnetic plate 680 x 200 mm, grinding wheel with flange (ø 240 x 25 mm), wet grinding attachment
            grinding length 1000 mm
            grinding width 300 mm
            workpiece height 230 mm
            table surface area 1000 x 240 mm
            x-travel 1000 mm
            y-travel 270 mm
            z-travel 350 mm
            grinding wheel diameter 240 mm
            grinding spindle speed 2180 U/min
            table speed -stepless- 3 - 30 m/min
            total power requirement 4,5 kW
            weight of the machine ca. 2,8 t
            dimensions of machine L x W x H 2,36 x 1,37 x 2,0 m
            Description :
            Accessories: magnetic plate 680 x 200 mm, grinding wheel with flange
            (ø 240 x 25 mm), wet grinding attachment


        • Hans Klein Werkzeugmaschinenhandel GmbH
        • Im Mühlgut 2-4
        • 77815 Bühl
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine - Horizontal ABA / ZIERSCH & BALTRUSCH ECOLINE 1206 A


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-2252 · Surface Grinding Machine - Horizontal

          ABA / ZIERSCH & BALTRUSCH - ECOLINE 1206 A - - 2008 - SIEMENS LC 200 / TP277

          Technical details
          grinding length 1250 mm︱grinding width 600 mm︱workpiece height mm︱Control SIEMENS LC 200 / TP277 ︱total power requirement kW︱weight of the machine ca. 7,7 t︱dimensions of the machine ca. m︱
          CNC precision, surface and profile grinding machine CNC control SIEMENS LC 200 / TP277 Table load maximum to the magnetic chuck 1200 kg Drives: X-axis drive hydraulic Y and Z-axis drive with servo drive and ball screw measuring system: X-axis rotary with rotary encoder Y and Z axis linear scale traverse paths X axis 1400mm Y axis 600mm Z axis 600mm Grinding length 1250 mm Grinding width 600 Distance between table and spindle center 700 mm Grinding wheel diameter 400 mm Grinding wheel width 100 mm Grinding wheel bore 127 mm
            grinding length 1250 mm
            grinding width 600 mm
            Control SIEMENS LC 200 / TP277
            weight of the machine ca. 7,7 t
            Description :
            CNC precision, surface and profile grinding machine

            CNC control SIEMENS LC 200 / TP277

            Table load maximum to the magnetic chuck 1200 kg
            Drives:
            X-axis drive hydraulic
            Y and Z-axis drive with servo drive and ball screw
            measuring system:
            X-axis rotary with rotary encoder
            Y and Z axis linear scale
            traverse paths
            X axis 1400mm
            Y axis 600mm
            Z axis 600mm
            Grinding length 1250 mm
            Grinding width 600
            Distance between table and spindle center 700 mm

            Grinding wheel diameter 400 mm
            Grinding wheel width 100 mm
            Grinding wheel bore 127 mm


        • Knops Werkzeugmaschinen
        • Konrad-Zuse-Straße 5
        • 40789 Monheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine - Horizontal BLOHM Planomat 612


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-9014 · Surface Grinding Machine - Horizontal

          BLOHM - Planomat 612 - - 2006 - Ergomatic Blohm

          Technical details
          grinding length 1.200 mm︱grinding width 600 mm︱workpiece height 550 mm︱control Ergomatic Blohm︱Grinding spindle: ︱max. spindle speed 1.450 1/min︱driving power - grinding spindle 7,5 kW︱grinding wheel diam. min/max. 190 / 400 mm︱grinding wheel wide min./max. 30 / 80 mm︱grinding wheel width (Standard) 50 mm︱grinding wheel hole diameter 127 mm︱movement areas: ︱x-travel 1.300 mm︱y-travel 550 mm︱z-travel 560 mm︱work table: ︱distance grinding spindle - table min./max. 150 / 700 mm︱table surface area 1.200 x 600 mm︱table height over floor 950 mm︱table adjustment - longitudinal 1.300 mm︱
          Surface Grinding Machine - Horizontal BLOHM - Planomat 612
            grinding length 1.200 mm
            grinding width 600 mm
            workpiece height 550 mm
            control Ergomatic Blohm
            max. spindle speed 1.450 1/min
            driving power - grinding spindle 7,5 kW
            grinding wheel diam. min/max. 190 / 400 mm
            grinding wheel wide min./max. 30 / 80 mm
            grinding wheel width (Standard) 50 mm
            grinding wheel hole diameter 127 mm
            x-travel 1.300 mm
            y-travel 550 mm
            z-travel 560 mm
            distance grinding spindle - tabl. 150 / 700 mm
            table surface area 1.200 x 600 mm
            table height over floor 950 mm
            table adjustment - longitudinal 1.300 mm
            Description :
            Surface Grinding Machine - Horizontal
            BLOHM - Planomat 612


        • Stiens Werkzeugmaschinen GmbH
        • Mittelweg 92
        • 59302 Oelde
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine - Horizontal ELB Perfekt 15 SPS


          • Gustav Schönberger GmbH
          • Hünderstr. 14
          • 74080 Heilbronn
          • Deutschland

          • (0049)7131 46060
            (0049)7131 460620
          • schoenberger@gsh-maschinen.de
            www.gsh-maschinen.de
          #1036-061692 · Surface Grinding Machine - Horizontal

          ELB - Perfekt 15 SPS - - 2005 -

          Technical details
          grinding length 1500 mm︱grinding width 600 mm︱workpiece height 400 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          - automatic infeed - electro magnet - coolant device Technische Daten / technical details: Schleiflänge / grinding length 1500 mm Schleifbreite / grinding width 600 mm Werkstückhöhe / workpiece height 400 mm Längsachse X / longitudinal travel X 1600 mm Querachse Z / cross travel Z 560 mm Vertikalachse Y / vertical travel Y 400 mm Elektromagnetabmessungen / electro magnet dimensions 1500x600 mm Schleifscheibe / grinding wheel 400x100x127 mm Antriebsleistung Schleifspindel / drive capacity grinding spindle 10 kW Gewicht der Maschine ca. / weight ca. 7100 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.
            grinding length 1500 mm
            grinding width 600 mm
            workpiece height 400 mm
            Description :
            - automatic infeed
            - electro magnet
            - coolant device

            Technische Daten / technical details:
            Schleiflänge / grinding length 1500 mm
            Schleifbreite / grinding width 600 mm
            Werkstückhöhe / workpiece height 400 mm
            Längsachse X / longitudinal travel X 1600 mm
            Querachse Z / cross travel Z 560 mm
            Vertikalachse Y / vertical travel Y 400 mm
            Elektromagnetabmessungen / electro magnet dimensions 1500x600 mm
            Schleifscheibe / grinding wheel 400x100x127 mm
            Antriebsleistung Schleifspindel / drive capacity grinding spindle 10 kW
            Gewicht der Maschine ca. / weight ca. 7100 kg
            Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -
            Technical data, accessories and description of the machine are not binding.





        • Gustav Schönberger GmbH
        • Hünderstr. 14
        • 74080 Heilbronn
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine - Horizontal ABA / ZIERSCH & BALTRUSCH Starline 600E NC-SP


          • Marcels Maschinen AG
          • Anthoptstrasse 11
          • 8222 Beringen (Schaffhausen)
          • Schweiz

          • (0041) 44 872 3400
            (0041) 44 872 3403
          • info@marcels-maschinen.ch
            http://www.marcels-maschinen.ch
          #1065-4675 · Surface Grinding Machine - Horizontal

          ABA / ZIERSCH & BALTRUSCH - Starline 600E NC-SP - - 2004 -

          Technical details
          grinding length 600 mm︱grinding width 500 mm︱workpiece height 500 mm︱table-size 800x400 mm︱table speeds 1-35 m/min︱grinding wheel diameter 400 mm︱spindle drive 11 kW︱weight of the machine ca. 4.5 t︱
          SURFACE % PROFILE GRINDING MACHINE magnetic plate 600x300mm Dresser on table Exhausting device More details on www.marcels-maschinen.ch
            grinding length 600 mm
            grinding width 500 mm
            workpiece height 500 mm
            table-size 800x400 mm
            table speeds 1-35 m/min
            grinding wheel diameter 400 mm
            spindle drive 11 kW
            weight of the machine ca. 4.5 t
            Description :
            SURFACE % PROFILE GRINDING MACHINE

            magnetic plate 600x300mm
            Dresser on table
            Exhausting device

            More details on www.marcels-maschinen.ch


        • Marcels Maschinen AG
        • Anthoptstrasse 11
        • 8222 Beringen (Schaffhausen)
        • Schweiz

        • Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine - Horizontal ABA Powerline


          • FLECKENSTEIN Werkzeugmaschinen GmbH
          • Sommerweg 15
          • 63831 Wiesen
          • Deutschland

          • +49 (0) 6096 9706 0
            +49 (0) 6096 9706 20
          • fleckenstein@fleckenstein-machine.com
            www.fleckenstein-machine.com
          #1118-1599 · Surface Grinding Machine - Horizontal

          ABA - Powerline - - 2001-2023 - SINUMERK 840 D

          Technical details
          grinding length 1.000 mm︱grinding width 600 mm︱workpiece height 400 mm︱Control SINUMERK 840 D ︱Grinding Area : ︱grinding range max. 1.000 x 600 mm︱travel cross (z-axis) 540 mm︱distance table surface - grinding spindle centre max. 600 mm︱Travel vertical (Y-axis) 500 mm︱Max. working height on new grinding wheel 400 mm︱workpiece table : ︱Electro permanent magnetic plate 800 x 500 mm︱pole pitch 18 mm︱clamping force in 8 levels - ︱Table drive (X-axis) : ︱Incremental encoder in the longitudinal axis X axi - ︱table speeds 2-35.000 mm/min︱Electromechanical longitudinal movement - ︱by means of digital servo motor, - ︱toothed belt and ball screw -
          Equipment and accessories - Linear measuring systems in Y- and Z-axis - All linear axes with digital servo motors and ball screw drive - Belt filter system with paper belt filter, tank capacity 640 l, coolant pump 200 l/min/4 bar - Manual coolant nozzles - adjustable - Automatic working chamber door pneumatically controlled - Electro-permanent magnetic plate 800 x 500 mm, pendulum pole pitch 18 mm - Automatic grinding wheel balancing device Fa. MPM - Full enclosure of the working area in stainless steel partial execution with LED working area lighting - Manually operated door, safety interlock in automatic mode - Portable electronic handwheel in automatic and manual mode for all axes - Three-color signal light - Electrical equipment 400V/50Hz - Switch cabinet cooling unit - Machine feet - Painting RAL 9002 (grey white), RAL 5010 (gentian blue) - Rinsing gun with hose and holder in the operating area - Approx. 5 pcs. grinding wheel flanges *** Machine prepared for grinding mist suction *** Grinding programs - Surface grinding - Plunge grinding - Profile grinding - Automatic program sequence with roughing, finishing, fine finishing and burnout - Multiple plunge-cut grinding for economical production - Surface grinding with continuous, infinitely programmable cross feed - Calibration of the grinding wheel (calibrate, backfeed, round corners) - Face grinding with back pull dressing - Dressing in grinding cycle with lift-off amount - Fully automatic compensation of dressing amounts - Tool management Dressing Technology Table dresser -straight- TAG: Dresser fixed on the machine table, roughing and finishing station with dressing tiles are arranged one behind the other, cylindrical dressing of grinding wheels for surface and plunge grinding, suitable for corundum and silicon carbide grinding wheels, cycle software with input menu Pre-profiler VPG-150: incl. diamond roughing wheel width 1.5 mm For economical pre-profiling (roughing out) of the grinding wheel, profiling unit firmly mounted on the table, suitable for corundum and silicon carbide grinding wheels, CNC dressing cycle for pre-profiling Table profile dresser TAD: Suitable for diamond wheel DFR, D = 120, tip radius r = 0.1 - 1mm, flank angle 28°,40°, 60°. Profile depth max. 20 mm, contour accuracy +/- 0.0025 mm, swivel angle +/- 70°, profiling in the program by means of graphical operator guidance in 3-D interpolation
            grinding length 1.000 mm
            grinding width 600 mm
            workpiece height 400 mm
            Control SINUMERK 840 D
            Grinding Area :
            grinding range max. 1.000 x 600 mm
            travel cross (z-axis) 540 mm
            distance table surface - grindin. max. 600 mm
            Travel vertical (Y-axis) 500 mm
            Max. working height on new grind. 400 mm
            workpiece table :
            Electro permanent magnetic plate 800 x 500 mm
            pole pitch 18 mm
            clamping force in 8 levels -
            Table drive (X-axis) :
            Incremental encoder in the longi. -
            table speeds 2-35.000 mm/min
            Electromechanical longitudinal m. -
            by means of digital servo motor, -
            toothed belt and ball screw -
            Description :
            Equipment and accessories
            - Linear measuring systems in Y- and Z-axis
            - All linear axes with digital servo motors and ball screw drive
            - Belt filter system with paper belt filter, tank capacity 640 l, coolant pump 200 l/min/4 bar
            - Manual coolant nozzles - adjustable
            - Automatic working chamber door pneumatically controlled
            - Electro-permanent magnetic plate 800 x 500 mm, pendulum pole pitch 18 mm
            - Automatic grinding wheel balancing device Fa. MPM
            - Full enclosure of the working area in stainless steel partial execution with LED working area lighting
            - Manually operated door, safety interlock in automatic mode
            - Portable electronic handwheel in automatic and manual mode for all axes
            - Three-color signal light
            - Electrical equipment 400V/50Hz
            - Switch cabinet cooling unit
            - Machine feet
            - Painting RAL 9002 (grey white), RAL 5010 (gentian blue)
            - Rinsing gun with hose and holder in the operating area
            - Approx. 5 pcs. grinding wheel flanges

            *** Machine prepared for grinding mist suction ***




            Grinding programs
            - Surface grinding
            - Plunge grinding
            - Profile grinding
            - Automatic program sequence with roughing, finishing, fine finishing and burnout
            - Multiple plunge-cut grinding for economical production
            - Surface grinding with continuous, infinitely programmable cross feed
            - Calibration of the grinding wheel (calibrate, backfeed, round corners)
            - Face grinding with back pull dressing
            - Dressing in grinding cycle with lift-off amount
            - Fully automatic compensation of dressing amounts
            - Tool management


            Dressing Technology

            Table dresser -straight- TAG:
            Dresser fixed on the machine table, roughing and finishing station with dressing tiles are arranged one behind the other, cylindrical dressing of grinding wheels for surface and plunge grinding,
            suitable for corundum and silicon carbide grinding wheels, cycle software with input menu

            Pre-profiler VPG-150:
            incl. diamond roughing wheel width 1.5 mm
            For economical pre-profiling (roughing out) of the grinding wheel, profiling unit firmly mounted on the table, suitable for corundum and silicon carbide grinding wheels, CNC dressing cycle for
            pre-profiling

            Table profile dresser TAD:
            Suitable for diamond wheel DFR, D = 120, tip radius r = 0.1 - 1mm, flank angle 28°,40°, 60°.
            Profile depth max. 20 mm, contour accuracy +/- 0.0025 mm, swivel angle +/- 70°,
            profiling in the program by means of graphical operator guidance in 3-D interpolation




        • FLECKENSTEIN Werkzeugmaschinen GmbH
        • Sommerweg 15
        • 63831 Wiesen
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine - Horizontal DANOBAT PSG - 1000


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-H08117 · Surface Grinding Machine - Horizontal

          DANOBAT - PSG - 1000 - - 2001 - Fanuc 210i - M

          Technical details
          grinding length 1000 mm︱grinding width 600 mm︱workpiece height 450 mm︱Control Fanuc 210i - M ︱total power requirement 20 kW︱weight of the machine ca. 5,5 t︱dimensions of the machine ca. 3950 x 3150 x 2550 mm︱
          CNC surface grinding machine Clamping area of the table 1000 x 500 mm Clamping surface for magnetic particle board 1000 x 500 mm Largest grinding surface: L x W x H 1000 x 600 x 450 mm Largest distance from table to spindle center 650 mm Table speed in the longitudinal direction 1 - 30 m / min Max. Table load 1500 kg Grinding wheel: diameter x width x bore 400 x 50 x Ø 127 mm Grinding spindle drive 7.5 kW Spindle speed 1500 rpm Connected load 20 kW Space required L x W x H 3950 x 3150 x 2550 mm Weight 5500 kg Equipment CNC control Fanuc 210i - M Electro magnetic plate 1000 x 500 mm Coolant device with paper filter Several Grinding wheels with flanges Digital display Condition machine is in good condition
            grinding length 1000 mm
            grinding width 600 mm
            workpiece height 450 mm
            Control Fanuc 210i - M
            total power requirement 20 kW
            weight of the machine ca. 5,5 t
            dimensions of the machine ca. 3950 x 3150 x 2550 mm
            Description :
            CNC surface grinding machine

            Clamping area of the table 1000 x 500 mm
            Clamping surface for magnetic particle board 1000 x 500 mm
            Largest grinding surface: L x W x H 1000 x 600 x 450 mm
            Largest distance from table to spindle center 650 mm
            Table speed in the longitudinal direction 1 - 30 m / min
            Max. Table load 1500 kg
            Grinding wheel: diameter x width x bore 400 x 50 x Ø 127 mm
            Grinding spindle drive 7.5 kW
            Spindle speed 1500 rpm
            Connected load 20 kW
            Space required L x W x H 3950 x 3150 x 2550 mm
            Weight 5500 kg

            Equipment
            CNC control Fanuc 210i - M
            Electro magnetic plate 1000 x 500 mm
            Coolant device with paper filter
            Several Grinding wheels with flanges
            Digital display

            Condition machine is in good condition


        • Knops Werkzeugmaschinen
        • Konrad-Zuse-Straße 5
        • 40789 Monheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine - Horizontal ZIERSCH & BALTRUSCH Starline 500 E


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-9054 · Surface Grinding Machine - Horizontal

          ZIERSCH & BALTRUSCH - Starline 500 E - - 2001 - Simatic OP 27 Siemens

          Technical details
          grinding length max. 600 mm︱grinding width max. 250 mm︱workpiece height - mm︱control Simatic OP 27 Siemens︱grinding range 600 x 250 mm︱distance spindle center to table 500 mm︱Grinding spindle: ︱turning speed range - stepless 1.000 - 3.000 U/min︱grinding head 300 x 50 x 76,2 mm︱drive capacity - spindle motor ca. 11 kW︱axis stroke: ︱x - axis 600 mm︱Y - Axis 300 mm︱Z - Axis 250 mm︱work table: ︱magnetic clamping plate 500 x 250 mm︱max. workpiece weight 250 kg︱feeds: ︱rapid traverse ( X / Y / Z ) 30 / 2 / 1,5 m/min︱total power requirement 20 kVA︱
          Surface Grinding Machine Horizontal Ziersch & Baltrusch - Starline 500 E - approx. 9.340 spindle hours - 4x NEW grinding wheels - 4x flanges - LTA suction with stand - Splash guard for work area (half height) - protective door - Infinitely variable speed control of the grinding spindle - Heidenhain: Incremental measuring system, incremental encoders, proximity switches
            grinding length max. 600 mm
            grinding width max. 250 mm
            workpiece height - mm
            control Simatic OP 27 Siemens
            grinding range 600 x 250 mm
            distance spindle center to table 500 mm
            turning speed range - stepless 1.000 - 3.000 U/min
            grinding head 300 x 50 x 76,2 mm
            drive capacity - spindle motor ca. 11 kW
            x - axis 600 mm
            Y - Axis 300 mm
            Z - Axis 250 mm
            magnetic clamping plate 500 x 250 mm
            max. workpiece weight 250 kg
            rapid traverse ( X / Y / Z ) 30 / 2 / 1,5 m/min
            total power requirement 20 kVA
            Description :
            Surface Grinding Machine Horizontal
            Ziersch & Baltrusch - Starline 500 E

            - approx. 9.340 spindle hours
            - 4x NEW grinding wheels
            - 4x flanges
            - LTA suction with stand

            - Splash guard for work area (half height)
            - protective door
            - Infinitely variable speed control of the grinding spindle
            - Heidenhain:
            Incremental measuring system, incremental encoders, proximity switches


        • Stiens Werkzeugmaschinen GmbH
        • Mittelweg 92
        • 59302 Oelde
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine - Horizontal ZIERSCH & BALTRUSCH FMNC SUPERPLUS ZB84


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-18001 · Surface Grinding Machine - Horizontal

          ZIERSCH & BALTRUSCH - FMNC SUPERPLUS ZB84 - - 2000 - Simatic OP27

          Technical details
          grinding length 800 mm︱grinding width 390 mm︱workpiece height 700 mm︱Control Simatic OP27 ︱x-axis 1040 mm︱y-axis 500 mm︱z-axis 390 mm︱spindle speeds (infinitely variable) 1500 - 4000 U/min︱grinding wheel diameter 400 mm︱grinding wheel width 50 mm︱grinding wheel hole diameter 127 ︱table load capacity 400 KG︱total power requirement 12 kW︱weight of the machine ca. 3,3 t︱dimensions of the machine ca. 3,6 x 2,4 x 2,5 m︱
          Grinding spindle KESSLER Clamping magnet SAV 800x400 mm Balancing unit MPM Coolant system with band filter DGS SBF 60 8 Grinding wheel flanges
            grinding length 800 mm
            grinding width 390 mm
            workpiece height 700 mm
            Control Simatic OP27
            x-axis 1040 mm
            y-axis 500 mm
            z-axis 390 mm
            spindle speeds (infinitely varia. 1500 - 4000 U/min
            grinding wheel diameter 400 mm
            grinding wheel width 50 mm
            grinding wheel hole diameter 127
            table load capacity 400 KG
            total power requirement 12 kW
            weight of the machine ca. 3,3 t
            dimensions of the machine ca. 3,6 x 2,4 x 2,5 m
            Description :
            Grinding spindle KESSLER
            Clamping magnet SAV 800x400 mm
            Balancing unit MPM
            Coolant system with band filter DGS SBF 60
            8 Grinding wheel flanges


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine - Horizontal GEIBEL&HOTZ FS 1050 GT CNC Rh


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-775469 · Surface Grinding Machine - Horizontal

          GEIBEL&HOTZ - FS 1050 GT CNC Rh - - 2000 -

          Technical details
          grinding length 1000 mm︱grinding width 500 mm︱workpiece height 425 mm︱Control ︱total power requirement 15 kW︱weight of the machine ca. 4,5 t︱dimensions of the machine ca. m︱
            grinding length 1000 mm
            grinding width 500 mm
            workpiece height 425 mm
            total power requirement 15 kW
            weight of the machine ca. 4,5 t


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine - Horizontal BLOHM PLANOMAT 616


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-769774 · Surface Grinding Machine - Horizontal

          BLOHM - PLANOMAT 616 - - 2000 -

          Technical details
          grinding length 1600 mm︱grinding width 600 mm︱workpiece height 500 mm︱total power requirement 50 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            grinding length 1600 mm
            grinding width 600 mm
            workpiece height 500 mm
            total power requirement 50 kW


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine - Horizontal ROSA LINEA STEEL 13.7


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-2254 · Surface Grinding Machine - Horizontal

          ROSA - LINEA STEEL 13.7 - - 2000 - E.C.S. CNC 2401

          Technical details
          grinding length 1500 mm︱grinding width 750 mm︱workpiece height 600 mm︱Control E.C.S. CNC 2401 ︱Table dimensions 1400 x 500 mm︱table load 1700 kg︱dimensions of grinding wheel 400 x 30 x 100 mm︱grinding wheel speed 1450 U/min.︱main drive 11 kW︱table speeds 1 - 40 m/min︱cross feeds: 0 - 4 m/min︱dimensions of machine 5350 x 3100 x 2415 mm︱total power requirement kW︱weight of the machine ca. 9,4 t︱dimensions of the machine ca. m︱
          CNC surface grinding machine in very good condition The machine can be demonstrated under power Equipment: - CNC control E.C.S. CNC 2401 System III - Magnetic plate 1400 x 500 mm - Coolant device with paper band filter Accesories: Machine shoes / fixators Machine documentation Various new spare parts, including coolant pump, grinding wheel with flange, guideway covers, electronics assembly, etc.
            grinding length 1500 mm
            grinding width 750 mm
            workpiece height 600 mm
            Control E.C.S. CNC 2401
            Table dimensions 1400 x 500 mm
            table load 1700 kg
            dimensions of grinding wheel 400 x 30 x 100 mm
            grinding wheel speed 1450 U/min.
            main drive 11 kW
            table speeds 1 - 40 m/min
            cross feeds: 0 - 4 m/min
            dimensions of machine 5350 x 3100 x 2415 mm
            weight of the machine ca. 9,4 t
            Description :
            CNC surface grinding machine in very good condition
            The machine can be demonstrated under power

            Equipment:
            - CNC control E.C.S. CNC 2401 System III
            - Magnetic plate 1400 x 500 mm
            - Coolant device with paper band filter

            Accesories:
            Machine shoes / fixators
            Machine documentation
            Various new spare parts, including coolant pump,
            grinding wheel with flange, guideway covers,
            electronics assembly, etc.


        • Knops Werkzeugmaschinen
        • Konrad-Zuse-Straße 5
        • 40789 Monheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine - Horizontal GEIBEL & HOTZ FS 635-Z CNC


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-77440 · Surface Grinding Machine - Horizontal

          GEIBEL & HOTZ - FS 635-Z CNC - - 1999 -

          Technical details
          grinding length 600 mm︱grinding width 350 mm︱workpiece height 385 mm︱total power requirement 19 kW︱weight of the machine ca. 2,3 t︱dimensions of the machine ca. m︱
            grinding length 600 mm
            grinding width 350 mm
            workpiece height 385 mm
            total power requirement 19 kW
            weight of the machine ca. 2,3 t


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine - Horizontal CHEVALIER FSG- 1632


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03150 · Surface Grinding Machine - Horizontal

          CHEVALIER - FSG- 1632 - - 1998 -

          Technical details
          grinding length 810 mm︱grinding width 405 mm︱workpiece height 500 mm︱electro magnetic clamping plate 800 X 400 mm︱table speed -stepless- 5 - 25 m/min︱dimensions of grinding wheel 355 X 50 X 127 mm︱total power requirement 3.7 kW︱weight of the machine ca. 3 t︱
          automatic vertical feed, dressing devise, electro magnet,800 X 400 coolant with paperfilter, hydraulic separate
            grinding length 810 mm
            grinding width 405 mm
            workpiece height 500 mm
            electro magnetic clamping plate 800 X 400 mm
            table speed -stepless- 5 - 25 m/min
            dimensions of grinding wheel 355 X 50 X 127 mm
            total power requirement 3.7 kW
            weight of the machine ca. 3 t
            Description :
            automatic vertical feed, dressing devise, electro magnet,800 X 400
            coolant with paperfilter,
            hydraulic separate


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine - Horizontal GEIBEL & HOTZ FS 850 GT SL


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-775880 · Surface Grinding Machine - Horizontal

          GEIBEL & HOTZ - FS 850 GT SL - - 1998 -

          Technical details
          grinding length 800 mm︱grinding width 500 mm︱workpiece height 425 mm︱total power requirement 15 kW︱weight of the machine ca. 4,5 t︱dimensions of the machine ca. m︱
            grinding length 800 mm
            grinding width 500 mm
            workpiece height 425 mm
            total power requirement 15 kW
            weight of the machine ca. 4,5 t


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine - Horizontal JUNG JUTEC 420


          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland

          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-20447 · Surface Grinding Machine - Horizontal

          JUNG - JUTEC 420 - - 1997 -

          Technical details
          grinding length 400 mm︱grinding width 200 mm︱workpiece height 300 mm︱digital readout 2 Achsen HEIDENHAIN︱table-size 600 x 200 mm︱max. table load 150 kg︱magnetic clamping plate 400 x 200 mm︱dist. center of grinding spindle - table 415 mm︱table travel longitudinal 420 mm︱table travel cross 190 mm︱table feed 2 - 28 m/min︱turning speed range - grinding wheel 1.680 U/min︱grinding wheel size 225 x 25 x 51 mm︱dressing device Kopfabrichter ︱coolant ︱voltage 400 V︱total power requirement 5,0 kW︱weight of the machine ca. 1,1 t︱dimensions of the machine ca. 2,00 x 1,50 x 2,10 m︱switchgear cabinet 0,80 x 0,40 x 1,80 m︱
          - Serial-No.: 9821097 - automat. vertical feed - electr. handwheel - digital display 2 axes HEIDENHAIN - head dresser with compensation - coolant device - magnetic separator
            grinding length 400 mm
            grinding width 200 mm
            workpiece height 300 mm
            digital readout 2 Achsen HEIDENHAIN
            table-size 600 x 200 mm
            max. table load 150 kg
            magnetic clamping plate 400 x 200 mm
            dist. center of grinding spindle. 415 mm
            table travel longitudinal 420 mm
            table travel cross 190 mm
            table feed 2 - 28 m/min
            turning speed range - grinding w. 1.680 U/min
            grinding wheel size 225 x 25 x 51 mm
            dressing device Kopfabrichter
            voltage 400 V
            total power requirement 5,0 kW
            weight of the machine ca. 1,1 t
            dimensions of the machine ca. 2,00 x 1,50 x 2,10 m
            switchgear cabinet 0,80 x 0,40 x 1,80 m
            Description :
            - Serial-No.: 9821097
            - automat. vertical feed
            - electr. handwheel
            - digital display 2 axes HEIDENHAIN
            - head dresser with compensation
            - coolant device
            - magnetic separator


        • Kirchgeorg Werkzeugmaschinen
        • Frankfurter Straße 141
        • 63303 Dreieich-Sprendlingen
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          •   
          •