Machining centre

Machinelist: Machining centre

Machining centre

Heinz Sanders GmbH
Fresenburger Weg 4
49779 Niederlangen
Deutschland

+49 (0) 5939 9406 40
+49 (0) 5939 9406 50
maschinen@heinz-sanders.de
www.heinz-sanders.de

#1125-7194 · Machining centre

HWACHEON - VESTA 1000 - - 2016 -

Technical details

x-travel 1000 mm︱y-travel 550 mm︱z-travel 500 mm︱control Siemens828D ︱rapid speed 36/36/30 m/min︱feed speeds 24000 mm/min︱table surface area 1100 x 502 mm︱turning speed range 12000 U/min︱no. of tools in the magazine 24 Stück︱tool taper BT 40 ︱weight of the machine ca. 6,5 t︱

- Commissioning: January 2017! - with Siemens828D including Shopmill - Flat top chip conveyor - Spindle with 12,000 rpm, SK 40 - Internal coolant supply up to 30 bar - Tool magazine with 24 places

x-travel 1000 mm

y-travel 550 mm

z-travel 500 mm

control Siemens828D

rapid speed 36/36/30 m/min

feed speeds 24000 mm/min

table surface area 1100 x 502 mm

turning speed range 12000 U/min

no. of tools in the magazine 24 Stück

tool taper BT 40

weight of the machine ca. 6,5 t

Description :

- Commissioning: January 2017!
- with Siemens828D including Shopmill
- Flat top chip conveyor
- Spindle with 12,000 rpm, SK 40
- Internal coolant supply up to 30 bar
- Tool magazine with 24 places

Datasheet

used Milling machines Machining centre AWEA FV 960

Aleman Machines e.K.
Am Mühlweg 1
73466 Lauchheim
Deutschland

+49 (0)7363-6098 20
+49 (0)7363-6098 19
info@aleman-machines.com
www.aleman-machines.com

#1120-666 · Machining centre

AWEA - FV 960 - - 2015 - HEIDENHAIN iTNC 530

Technical details

travel 960 mm︱length 600 mm︱width 480 mm︱Control HEIDENHAIN iTNC 530 ︱Machine on 9000 ︱Spindle hours 3500 ︱Chip coveyor inkl. ︱handwheel el. ︱round table D 350 ︱table weight 200 Kg︱number of spindle speeds 12000 U/min/rpm︱spindle drive 14/10 kW︱rapid traverse 32/32/24 m/min︱ 30 fach︱spindle taper ISO BT 40 ︱dimensions of the machine ca. 3,1 x 2,3 x 3,1 m︱total power requirement 45 kW︱weight of the machine ca. 7,4 t︱

travel 960 mm

length 600 mm

width 480 mm

Control HEIDENHAIN iTNC 530

Machine on 9000

Spindle hours 3500

Chip coveyor inkl.

handwheel el.

round table D 350

table weight 200 Kg

number of spindle speeds 12000 U/min/rpm

spindle drive 14/10 kW

rapid traverse 32/32/24 m/min

30 fach

spindle taper ISO BT 40

dimensions of the machine ca. 3,1 x 2,3 x 3,1 m

total power requirement 45 kW

weight of the machine ca. 7,4 t

Datasheet

used Milling machines Machining centre OKK VP1200

Intermach BV
lange voor 71
8316BC Marknesse
Niederlande

+31 (0)653235637
info@intermach.nl
www.intermach.nl

#2050-F587 · Machining centre

OKK - VP1200 - - 2004 - Fanuc

Technical details

travel 1600 mm︱length 1600 mm︱width 1200 mm︱spindle head according to ︱spindle turning speed range 100-12000 U/min︱switching steps ︱feeding velocity x-Axis min./max. mm︱y-Axis min./max. mm︱Control Fanuc ︱

Brand: OKK Type: VP1200 CNC brand: Fanuc CNC model: 160is-MB Year of make: 2004 Table length: 1.600 mm Table width: 1.300 mm X: 1.600 mm Y: 1.300 mm Z: 550 mm Throat depth: 560 mm Tools: BT40 Tool changer: 40 Minimum speed: 100 RPM Maximum speed: 12.000 RPM Max. workpiece diameter: 82 mm ø Maximum table load: 2.000 kg For additional information, please refer to the pdf file Machine dimensions: 5.800 x 3.200 x 2.800 mm Machine weight: 16.000 kg

travel 1600 mm

length 1600 mm

width 1200 mm

spindle turning speed range 100-12000 U/min

Control Fanuc

Description :

Brand: OKK
Type: VP1200
CNC brand: Fanuc
CNC model: 160is-MB
Year of make: 2004
Table length: 1.600 mm
Table width: 1.300 mm
X: 1.600 mm
Y: 1.300 mm
Z: 550 mm
Throat depth: 560 mm
Tools: BT40
Tool changer: 40
Minimum speed: 100 RPM
Maximum speed: 12.000 RPM
Max. workpiece diameter: 82 mm ø
Maximum table load: 2.000 kg
For additional information, please refer to the pdf file
Machine dimensions: 5.800 x 3.200 x 2.800 mm
Machine weight: 16.000 kg

Datasheet

used Milling machines Machining centre HEDELIUS - Vertikal CB 70

Heinz Sanders GmbH
Fresenburger Weg 4
49779 Niederlangen
Deutschland

+49 (0) 5939 9406 40
+49 (0) 5939 9406 50
maschinen@heinz-sanders.de
www.heinz-sanders.de

#1125-3140032 · Machining centre

HEDELIUS - Vertikal - CB 70 - - 2001 -

Technical details

x-travel 2100 mm︱y-travel 720 mm︱z-travel 600 mm︱spindle taper SK 40 ︱turning speeds 30 - 8000 U/min︱no. of workpieces in the magazine 30 Stück︱table surface area 2800 x 650 mm︱table load 2500 kg︱table height over floor 900 mm︱rapid travel x/y/z 30 m/min︱feed speeds X/Y/Z 0 / 30000 mm/min︱total power requirement 25 kW︱weight of the machine ca. 12000 kg︱dimensions of the machine ca. 5500 x 3400 x 3100 mm︱

CNC traveling column machining center Hedelius Furnishing: - HEIDENHAIN control TNC426 - chip conveyor - Coolant system 350 / 2.5 bar - Working area hood Machining values: - max. milling capacity: 600cm³/min - max. drilling Ø: 44 mm - max. thread Ø: M30 operating hours: - control on = 68283 hours - machine on = 67782 hours - program run = 20891 hours

x-travel 2100 mm

y-travel 720 mm

z-travel 600 mm

spindle taper SK 40

turning speeds 30 - 8000 U/min

no. of workpieces in the magazin. 30 Stück

table surface area 2800 x 650 mm

table load 2500 kg

table height over floor 900 mm

rapid travel x/y/z 30 m/min

feed speeds X/Y/Z 0 / 30000 mm/min

total power requirement 25 kW

weight of the machine ca. 12000 kg

dimensions of the machine ca. 5500 x 3400 x 3100 mm

Description :

CNC traveling column machining center Hedelius

Furnishing:
- HEIDENHAIN control TNC426
- chip conveyor
- Coolant system 350 / 2.5 bar
- Working area hood

Machining values:
- max. milling capacity: 600cm³/min
- max. drilling Ø: 44 mm
- max. thread Ø: M30

operating hours:
- control on = 68283 hours
- machine on = 67782 hours
- program run = 20891 hours

Datasheet

used Milling machines Machining centre DECKEL MAHO DMC 50 H

AS Maschinenhandel
Welserstr. 10e
51149 Köln
Deutschland

+49 (0)22031864856
+49 (0)22031864857
mail@asmaschinenhandel.de
www.asmaschinenhandel.de

#2044-10083 · Machining centre

DECKEL MAHO - DMC 50 H - - 2001 - Sinumerik 840 D

Technical details

travel 0 mm︱length 0 mm︱width 0 mm︱spindle head according to ︱spindle turning speed range U/min︱switching steps ︱feeding velocity x-Axis min./max. mm︱y-Axis min./max. mm︱Control Sinumerik 840 D ︱X- + Z-axis kW︱y-travel 560 mm︱z-travel 510 mm︱x-travel 560 mm︱tool taper SK 40 ︱weight of the machine ca. 8 t︱

Control Sinumerik 840 D

y-travel 560 mm

z-travel 510 mm

x-travel 560 mm

tool taper SK 40

weight of the machine ca. 8 t

Datasheet

used Milling machines Machining centre ELUMATEC Stabbearbeitung SBZ 130/01

Heinz Sanders GmbH
Fresenburger Weg 4
49779 Niederlangen
Deutschland

+49 (0) 5939 9406 40
+49 (0) 5939 9406 50
maschinen@heinz-sanders.de
www.heinz-sanders.de

#1125-3500061 · Machining centre

ELUMATEC Stabbearbeitung - SBZ 130/01 - - 1999 -

Technical details

x-axis 6450 mm︱y-axis 400 mm︱z-axis 380 mm︱working lenght 6500 mm︱Number of tools 8 St.︱tool taper BT30 ︱tool changing time 1,2 sec︱diameter of tools max. 80 mm︱turning speeds 6000 U/min︱Feed speed X = 34 m/min.︱Feed speed Y+Z = 18 m/min.︱total power requirement 8,5 kW︱dimensions 9800 x 3000 x 2400/3300 mm︱weight 5400 kg︱

*Bar machining center, 3-axis machining of aluminum, plastic, steel and stainless steel profiles*

x-axis 6450 mm

y-axis 400 mm

z-axis 380 mm

working lenght 6500 mm

Number of tools 8 St.

tool taper BT30

tool changing time 1,2 sec

diameter of tools max. 80 mm

turning speeds 6000 U/min

Feed speed X = 34 m/min.

Feed speed Y+Z = 18 m/min.

total power requirement 8,5 kW

dimensions 9800 x 3000 x 2400/3300 mm

weight 5400 kg

Description :

*Bar machining center, 3-axis machining of aluminum, plastic, steel
and stainless steel profiles*

Datasheet

used Milling machines Machining centre AXA VC2

Markus Hirsch GmbH
Hüttenstrasse 1
46284 Dorsten
Deutschland

+49 2362 95035 12
+49 2362 95035 10
liersch@hirsch-maschinen.de
www.hirsch-maschinen.de

#1077-03421 · Machining centre

AXA - VC2 - - 1992 - Heidenhain

Technical details

x-travel 2000 mm︱y-travel 500 mm︱z-travel 480 mm︱control Heidenhain ︱type TNC 407︱spindle taper ISO 40 ︱spindle turning speed range 6000 U/min︱feed 15 m/min︱Tool changer 40 ︱Cooling through the spindle 10 bar︱chip conveyor ︱ elekt. ︱indexing device - swivable CNC ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

x-travel 2000 mm

y-travel 500 mm

z-travel 480 mm

control Heidenhain

type TNC 407

spindle taper ISO 40

spindle turning speed range 6000 U/min

feed 15 m/min

Tool changer 40

Cooling through the spindle 10 bar

elekt.

indexing device - swivable CNC

Datasheet

Milling Machine - Horizontal

Hop Machines
Wethouder Lindersstraat 145
5455 GK Wilbertoord
Niederlande

+31 (0)485478107
info@hopmachines.nl
www.hopmachines.nl

#2018-5615 · Milling Machine - Horizontal

MIKRON HAAS - VCE500 - - 1997 -

Technical details

x-travel 500 mm︱y-travel 400 mm︱z-travel 400 mm︱working length X mm︱working length Y mm︱working depth Z mm︱Workpiece dimensions mm︱Workingpiece thickness from to mm︱Motor output kW︱Number of axles St.︱Number of milling agregates St.︱Number of heads vertical St.︱Number of heads horizontal St.︱Overall size mm︱Weight kg︱Year ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

x-travel 500 mm

y-travel 400 mm

z-travel 400 mm

Datasheet

used Milling machines Milling Machine - Horizontal MIKRON WF 21 D

Christoph Busch GmbH
Dieselstr. 22
41352 Korschenbroich
Deutschland

+49 (0) 2182 570 5930
+49 (0) 2182 5785202
mail@busch-gruppe.de
www.busch-gruppe.de

#2052-06409 · Milling Machine - Horizontal

MIKRON - WF 21 D - - 1990 - Heidenhain 355

Technical details

x-travel 450 mm︱y-travel 400 mm︱z-travel 400 mm︱︱control Heidenhain 355 ︱cooling ︱total power requirement 4 kW︱weight of the machine ca. 2,4 t︱dimensions of the machine ca. m︱

x-travel 450 mm

y-travel 400 mm

z-travel 400 mm

control Heidenhain 355

total power requirement 4 kW

weight of the machine ca. 2,4 t

Datasheet

used Milling machines Milling Machine - Horizontal DECKEL DC40-2

MW-MACHINES
Dorf 9
4133 Hofkirchen
Österreich

+43 (0)66718068977
-
info@machines-mw.at
machines-mw.at

#2077-30002 · Milling Machine - Horizontal

DECKEL - DC40-2 - - 1988 -

Technical details

x-travel 635 mm︱y-travel 500 mm︱z-travel 630 mm︱b-axis 360 °︱rapid traverse 15 m/min︱spindle turning speed - stepless bis 4000 U/min︱spindle drive 18,7 kW︱toolpiece magazine: chain magazine 108 Stück︱tool diameter 125 mm︱wotkpiece diameter with 2 vacant positions 175 mm︱workpiece length 400 mm︱weight of tools max. 10 (15) kg︱table-size 500 x 630 mm︱weight of the machine ca. 9,5 t︱dimensions of the machine ca. m︱

x-travel 635 mm

y-travel 500 mm

z-travel 630 mm

b-axis 360 °

rapid traverse 15 m/min

spindle turning speed - stepless bis 4000 U/min

spindle drive 18,7 kW

toolpiece magazine: chain magazi. 108 Stück

tool diameter 125 mm

wotkpiece diameter with 2 vacant. 175 mm

workpiece length 400 mm

weight of tools max. 10 (15) kg

table-size 500 x 630 mm

weight of the machine ca. 9,5 t

Datasheet

used Milling machines Milling Machine - Horizontal Deckel FP5NC

Jansen Machinehandel BV
Bredaseweg 210
4873 LA Etten-leur
Nederland

+31 (0) 76 5015750
info@jansenmachinehandel.nl
www.jansenmachinehandel.nl

#2049-F414 · Milling Machine - Horizontal

Deckel - FP5NC - - 1986 -

Technical details

Control Dialog 4 ︱Table length 1000 mm︱Table width 500 mm︱Spindle taper ISO 40 ︱

Control Dialog 4

Table length 1000 mm

Table width 500 mm

Spindle taper ISO 40

Description :

Datasheet

used Milling machines Milling Machine - Horizontal WEILER FHP 750

MW-MACHINES
Dorf 9
4133 Hofkirchen
Österreich

+43 (0)66718068977
-
info@machines-mw.at
machines-mw.at

#2077-30009 · Milling Machine - Horizontal

WEILER - FHP 750 - - 1983 -

Technical details

x-travel 550 mm︱y-travel 180 mm︱z-travel 400 mm︱table-size 750 x 200 mm︱feed range - horizontal 15 - 750 mm/min︱feed range - vertical 5 - 250 mm/min︱rapid traverse 5,5 m/min︱arbor support 350 mm︱total power requirement kW︱weight of the machine ca. 1,35 t︱dimensions of the machine ca. 2 x 1,45 x 1,9 m︱

x-travel 550 mm

y-travel 180 mm

z-travel 400 mm

table-size 750 x 200 mm

feed range - horizontal 15 - 750 mm/min

feed range - vertical 5 - 250 mm/min

rapid traverse 5,5 m/min

arbor support 350 mm

weight of the machine ca. 1,35 t

dimensions of the machine ca. 2 x 1,45 x 1,9 m

Datasheet

used Milling machines Milling Machine - Horizontal RECKERMANN FU 1000 (FW)

EnTeHa GmbH & Co.KG
Im Wollenklingen 6
69517 Gorxheimertal
Deutschland

+49 6201 2630 545
info@enteha.de
www.enteha.de

#2081-3405 · Milling Machine - Horizontal

RECKERMANN - FU 1000 (FW) - - 1975 -

Technical details

x-travel 900 mm︱y-travel 340 mm︱z-travel 380 mm︱total power requirement 3 kW︱weight of the machine ca. 1,7 t︱dimensions of the machine ca. 2*2*2 m︱

Horizontal console milling machine Spindle SK 40 Speed range 30-1500 min-1 Feed rates 4 / 11 to 230 / 570 mm/min Weight approx. 1700 kg Working area: 900 x 340 x 380 Control: Table size 1200 x 250

x-travel 900 mm

y-travel 340 mm

z-travel 380 mm

total power requirement 3 kW

weight of the machine ca. 1,7 t

dimensions of the machine ca. 2*2*2 m

Description :

Horizontal console milling machine
Spindle SK 40
Speed range 30-1500 min-1
Feed rates 4 / 11 to 230 / 570 mm/min
Weight approx. 1700 kg
Working area: 900 x 340 x 380
Control: Table size 1200 x 250

Datasheet

used Milling machines Milling Machine - Horizontal SUNDSTRAND RIGIDE MILL N°33

FIMOTEC
20 RUE AMPERE
67500 HAGUENAU
Frankreich

+33 (0)388720247
+33 (0)388936066
FIMOTEC@WANADOO.FR
WWW.FIMOTEC.FR

#1105-01103 · Milling Machine - Horizontal

SUNDSTRAND - RIGIDE MILL N°33 - - 1970 -

Technical details

x-travel 1250 mm︱y-travel 500 mm︱z-travel 500 mm︱table-size 1800x320 mm︱total power requirement kW︱weight of the machine ca. 5 t︱dimensions of the machine ca. m︱

horizontal for platt milling

x-travel 1250 mm

y-travel 500 mm

z-travel 500 mm

table-size 1800x320 mm

weight of the machine ca. 5 t

Description :

horizontal for platt milling

Datasheet

used Milling machines Milling Machine - Horizontal WANDERER OG/U

WMT GmbH & Co.KG
Siemensstraße 1
46342 Velen-Ramsdorf
Deutschland

+49 2863 92477-47
+49 2863 92477-50
info@w-m-t.de
www.w-m-t.de

#1108-30474 · Milling Machine - Horizontal

WANDERER - OG/U - - 1969 -

Technical details

x-travel 700 mm︱y-travel 225 mm︱z-travel 400 mm︱turning speed range - horizontal 45 - 1800 U/min︱taper MK SK40 ︱table surface area 1000 x 300 mm︱total power requirement 3,8 kW︱weight of the machine ca. 1,75 t︱dimensions of the machine ca. 1,3 x 1,7 x 1,8 m︱

x-travel 700 mm

y-travel 225 mm

z-travel 400 mm

turning speed range - horizontal 45 - 1800 U/min

taper MK SK40

table surface area 1000 x 300 mm

total power requirement 3,8 kW

weight of the machine ca. 1,75 t

dimensions of the machine ca. 1,3 x 1,7 x 1,8 m

Datasheet

used Milling machines Milling Machine - Horizontal STEINEL SH5

MW-MACHINES
Dorf 9
4133 Hofkirchen
Österreich

+43 (0)66718068977
-
info@machines-mw.at
machines-mw.at

#2077-30003 · Milling Machine - Horizontal

STEINEL - SH5 - - -

Technical details

x-travel / mm︱y-travel / mm︱z-travel / mm︱table surface area 700 x 200 mm︱total power requirement kW︱weight of the machine ca. 0,7 t︱dimensions of the machine ca. m︱

x-travel / mm

y-travel / mm

z-travel / mm

table surface area 700 x 200 mm

weight of the machine ca. 0,7 t

Datasheet

milling machining centers - horizontal

IVW GMBH
Niederrheinstr.298
40489 Düsseldorf
Deutschland

(0049)211-4184428
(0049)211-4184430
cd@ivwgmbh.com
www.ivwgmbh.com

#1088-E00983 · milling machining centers - horizontal

GROB - 520 G - - 2014 - 840 D

Technical details

x-travel 750 mm︱y-travel 1000 mm︱z-travel 870 mm︱Control 840 D ︱total power requirement 29 kW︱weight of the machine ca. 22,5 t︱dimensions of the machine ca. B 3,2 x L 6 x H 3.3 m︱

x-travel 750 mm

y-travel 1000 mm

z-travel 870 mm

Control 840 D

total power requirement 29 kW

weight of the machine ca. 22,5 t

dimensions of the machine ca. B 3,2 x L 6 x H 3.3 m

Datasheet

used Milling machines milling machining centers - horizontal DMG Mori Seiki DMU 50 Ecoline

Jansen Machinehandel BV
Bredaseweg 210
4873 LA Etten-leur
Nederland

+31 (0) 76 5015750
info@jansenmachinehandel.nl
www.jansenmachinehandel.nl

#2049-F652 · milling machining centers - horizontal

DMG Mori Seiki - DMU 50 Ecoline - - 2012 -

Technical details

CNC brand Siemens ︱CNC model 840D ︱Table width 500 mm︱X 500 mm︱Y 450 mm︱Z 400 mm︱Maximum speed 10.000 RPM︱table load 200 kg︱spindle taper SK40 ︱

Brand DMG Mori Seiki Machine no F652 Type DMU 50 Ecoline Control Siemens 840D Year of make 2012 Table width 500 mm Table diameter 630 mm ø Table adjustable in degrees X 500 mm Y 450 mm Z 400 mm Spindle taper SK40 Speed minimum 20 RPM Speed maximum 10.000 RPM Maximum table load 200 kg Chip transport Machine size 3.400 x 2.500 x 2.200 mm Machine weight 4.700 kg Tool magazine positions: 30 B-as: -5/+110 ° C-as: 360 ° Engine power: 13/9 Kw

CNC brand Siemens

CNC model 840D

Table width 500 mm

X 500 mm

Y 450 mm

Z 400 mm

Maximum speed 10.000 RPM

table load 200 kg

spindle taper SK40

Description :

Brand DMG Mori Seiki
Machine no F652
Type DMU 50 Ecoline
Control Siemens 840D
Year of make 2012
Table width 500 mm
Table diameter 630 mm ø
Table adjustable in degrees
X 500 mm
Y 450 mm
Z 400 mm
Spindle taper SK40
Speed minimum 20 RPM
Speed maximum 10.000 RPM
Maximum table load 200 kg
Chip transport
Machine size 3.400 x 2.500 x 2.200 mm
Machine weight 4.700 kg

Tool magazine positions: 30
B-as: -5/+110 °
C-as: 360 °
Engine power: 13/9 Kw

Datasheet

used Milling machines milling machining centers - horizontal QUASER HX504 AE

STEINHAND GmbH
Am Stahlwerk 15
45527 Hattingen
Deutschland

+49 (0) 2324 / 977 26 - 01
+49 (0) 2324 / 977 26 - 99
info@steinhand.de
www.steinhand.de

#2026-1530 · milling machining centers - horizontal

QUASER - HX504 AE - - 2010 - FANUC Oi-MD

Technical details

travel -x axis 760 mm︱travel -y axis 640 mm︱travel -z axis 760 mm︱surface area 500 x 500 mm︱control FANUC Oi-MD ︱numbers of positions in the tool changer 60 ︱

Milling machining centers - horizontal | QUASER - HX504 AE The machine is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: HX504AE | HX 504 AE | HX-504 AE | HX 504AE

travel -x axis 760 mm

travel -y axis 640 mm

travel -z axis 760 mm

surface area 500 x 500 mm

control FANUC Oi-MD

numbers of positions in the tool. 60

Description :

Milling machining centers - horizontal | QUASER - HX504 AE

The machine is in a well-maintained condition.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
#Tags: HX504AE | HX 504 AE | HX-504 AE | HX 504AE

Datasheet

used Milling machines milling machining centers - horizontal Tos SPEEDtec

Jansen Machinehandel BV
Bredaseweg 210
4873 LA Etten-leur
Nederland

+31 (0) 76 5015750
info@jansenmachinehandel.nl
www.jansenmachinehandel.nl

#2049-F641 · milling machining centers - horizontal

Tos - SPEEDtec - - 2009 -

Technical details

CNC brand Siemens ︱CNC model Sinumerik 840D ︱Table length 4x 1.000 mm︱Table width 3x 1.000 / 1x 1.250 mm︱X 1.250 mm︱Y 1.000 mm︱Z 600 mm︱Maximum speed 12.000 RPM︱table load 4.000 kg︱spindle taper HSK 100 ︱

Brand Tos Machine no F641 Type SPEEDtec CNC Brand Siemens CNC Type Sinumerik 840D Year of make 2009 X 1.250 mm Y 1.000 mm Z 600 mm Intake HSK 100 Engine power 25 kW Speed 12000 RPM Tool changer Number of pallets 4 Outgoing ram Including manuals Speed maximum 12.000 RPM Maximum pallet load 4.000 kg Chip transport Tool magazine positions: 2x 40 , HSK 100 4 tables, 1x 1.000 x 1.250mm / 3x 1.000 x 1.000mm

CNC brand Siemens

CNC model Sinumerik 840D

Table length 4x 1.000 mm

Table width 3x 1.000 / 1x 1.250 mm

X 1.250 mm

Y 1.000 mm

Z 600 mm

Maximum speed 12.000 RPM

table load 4.000 kg

spindle taper HSK 100

Description :

Brand Tos
Machine no F641
Type SPEEDtec
CNC Brand Siemens
CNC Type Sinumerik 840D
Year of make 2009
X 1.250 mm
Y 1.000 mm
Z 600 mm
Intake HSK 100
Engine power 25 kW
Speed 12000 RPM
Tool changer
Number of pallets 4
Outgoing ram
Including manuals
Speed maximum 12.000 RPM
Maximum pallet load 4.000 kg
Chip transport

Tool magazine positions: 2x 40 , HSK 100
4 tables, 1x 1.000 x 1.250mm / 3x 1.000 x 1.000mm

Datasheet

used Milling machines milling machining centers - horizontal MORI SEIKI NH8000 DCG

STEINHAND GmbH
Am Stahlwerk 15
45527 Hattingen
Deutschland

+49 (0) 2324 / 977 26 - 01
+49 (0) 2324 / 977 26 - 99
info@steinhand.de
www.steinhand.de

#2026-1634 · milling machining centers - horizontal

MORI SEIKI - NH8000 DCG - - 2008 - FANUC - MSX-701III

Technical details

travel -x axis 1.400 mm︱travel -y axis 1.200 mm︱travel -z axis 1.350 mm︱control FANUC - MSX-701III ︱numbers of positions in the tool changer 60 ︱tool taper HSK 100 ︱max. Spindle speed 8.000 U/min.︱max. tool length 800 mm︱max. tool weight 30 kg︱

Milling machining centers - horizontal | MORI SEIKI - NH8000 DCG equipped with additional 4th axis. Equipment: - B-axis (rotary table): 360,000 X 0.0001, - 2-fold pallet changing system, - Pallet dimensions 800 mm x 800 mm, The machine is in a well-maintained condition with approx. 30.000 (h) Power-On hours. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MORI-SEIKI | NH 8000 | NH8000DCG | NH-8000

travel -x axis 1.400 mm

travel -y axis 1.200 mm

travel -z axis 1.350 mm

control FANUC - MSX-701III

numbers of positions in the tool. 60

tool taper HSK 100

max. Spindle speed 8.000 U/min.

max. tool length 800 mm

max. tool weight 30 kg

Description :

Milling machining centers - horizontal | MORI SEIKI - NH8000 DCG
equipped with additional 4th axis.

Equipment:
- B-axis (rotary table): 360,000 X 0.0001,
- 2-fold pallet changing system,
- Pallet dimensions 800 mm x 800 mm,

The machine is in a well-maintained condition
with approx. 30.000 (h) Power-On hours.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
#Tags: MORI-SEIKI | NH 8000 | NH8000DCG | NH-8000

Datasheet

used Milling machines milling machining centers - horizontal HYUNDAI-KIA HS630

STEINHAND GmbH
Am Stahlwerk 15
45527 Hattingen
Deutschland

+49 (0) 2324 / 977 26 - 01
+49 (0) 2324 / 977 26 - 99
info@steinhand.de
www.steinhand.de

#2026-1531 · milling machining centers - horizontal

HYUNDAI-KIA - HS630 - - 2008 - FANUC 18i-M

Technical details

travel -x axis 1.050 mm︱travel -y axis 875 mm︱travel -z axis 875 mm︱control FANUC 18i-M ︱NC rotary table 630 x 630 ︱numbers of positions in the tool changer 60 ︱Dimensions (L x W x H) 3.525 x 5.650 x 3.526 mm︱weight of the machine 20.000 kg︱

Milling machining centers - horizontal | HYUNDAI KIA - HS630 equipped with ITC (30bar), chip conveyor & RENISHAW tool changer. The machine is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: HYUNDAI WIA - HS630 | HS 630 | HS-630

travel -x axis 1.050 mm

travel -y axis 875 mm

travel -z axis 875 mm

control FANUC 18i-M

NC rotary table 630 x 630

numbers of positions in the tool. 60

Dimensions (L x W x H) 3.525 x 5.650 x 3.526 mm

weight of the machine 20.000 kg

Description :

Milling machining centers - horizontal | HYUNDAI KIA - HS630
equipped with ITC (30bar), chip conveyor & RENISHAW tool changer.

The machine is in a well-maintained condition.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
#Tags: HYUNDAI WIA - HS630 | HS 630 | HS-630

Datasheet

used Milling machines milling machining centers - horizontal TOYODA FH630SX

STEINHAND GmbH
Am Stahlwerk 15
45527 Hattingen
Deutschland

+49 (0) 2324 / 977 26 - 01
+49 (0) 2324 / 977 26 - 99
info@steinhand.de
www.steinhand.de

#2026-1659 · milling machining centers - horizontal

TOYODA - FH630SX - - 2007 - FANUC31iMA

Technical details

number of spindle speeds 6.000 U/min︱tool taper BT50 ︱numbers of positions in the tool changer 121 ︱control FANUC31iMA ︱

Milling machining centers - horizontal | TOYODA - FH630SX equipped with ITC and chip conveyor. Additional equipment: + Full NC table 360.000 * 0,001 deg The machine is in a well-maintained condition. Technical data of the machine will follow soon. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: FH 630SX | FH630 | FH-630 | FH 630 SX

number of spindle speeds 6.000 U/min

tool taper BT50

numbers of positions in the tool. 121

control FANUC31iMA

Description :

Milling machining centers - horizontal | TOYODA - FH630SX
equipped with ITC and chip conveyor.

Additional equipment:
+ Full NC table 360.000 * 0,001 deg

The machine is in a well-maintained condition.

Technical data of the machine will follow soon.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
#Tags: FH 630SX | FH630 | FH-630 | FH 630 SX

Datasheet

used Milling machines milling machining centers - horizontal HECKERT HEC 500D XXL

Gustav Schönberger GmbH
Hünderstr. 14
74080 Heilbronn
Deutschland

(0049)7131 46060
(0049)7131 460620
schoenberger@gsh-maschinen.de
www.gsh-maschinen.de

#1036-053742 · milling machining centers - horizontal

HECKERT - HEC 500D XXL - - 2007 -

Technical details

x-travel 750 mm︱y-travel 750 mm︱z-travel 725 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

CNC control Sinumerik 840D NC-rotary table B-axis automatic tool changer for 320 tools pallet changing device, 2 pallets 500 mm x 500mm coolant through spindle device IKZ (80 bar) chip conveyor coolant device Technische Daten / technical details: X-Weg längs / X-travel longitudinal 750 mm Y-Weg senkrecht / Y-travel vertical 750 mm Z-Weg quer / Z-travel cross 725 mm B-Achse / B-axis 360 ° Spindelaufnahme / spindle taper HSK 63A Drehzahlbereich Spindel / spindle speed 50-10000 Upm /rpm Werkzeugplätze / tool places in changer 320 Vorschub / infeed 60000 mm/min Eilgang / rapid feed 60 m/min Antriebsleistung Spindel 40/100% ED / drive capacity spindle 40/100%ED 37/24 kW Gewicht der Maschine ca. / weight ca. 15000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

x-travel 750 mm

y-travel 750 mm

z-travel 725 mm

Description :

CNC control Sinumerik 840D
NC-rotary table B-axis
automatic tool changer for 320 tools
pallet changing device, 2 pallets 500 mm x 500mm
coolant through spindle device IKZ (80 bar)
chip conveyor
coolant device

Technische Daten / technical details:
X-Weg längs / X-travel longitudinal 750 mm
Y-Weg senkrecht / Y-travel vertical 750 mm
Z-Weg quer / Z-travel cross 725 mm
B-Achse / B-axis 360 °
Spindelaufnahme / spindle taper HSK 63A
Drehzahlbereich Spindel / spindle speed 50-10000 Upm /rpm
Werkzeugplätze / tool places in changer 320
Vorschub / infeed 60000 mm/min
Eilgang / rapid feed 60 m/min
Antriebsleistung Spindel 40/100% ED / drive capacity spindle 40/100%ED 37/24
kW
Gewicht der Maschine ca. / weight ca. 15000 kg
Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -
Technical data, accessories and description of the machine are not binding.

Datasheet

TOP Manufacturer:

HEDELIUS - VERTIKAL - DECKEL MAHO - KEMT - AXA - ELUMATEC STABBEARBEITUNG - HWACHEON - AWEA - OKK -