European network of stockholding machinery dealers

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:

          Pillar Drilling Machine

          Machinelist: Pillar Drilling Machine


          Pillar Drilling Machine

          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine ALZMETALL Alzstar 40/SV


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76270 · Pillar Drilling Machine

          ALZMETALL - Alzstar 40/SV - - Neu -

          Technical details
          Drilling capacity in St 60 40 mm︱threading in St 60 M 24 mm︱threading in GG 20 M 30 ︱bore stroke 120 mm︱Short spindle MK 3 ︱throat 293 mm︱column diameter 115 mm︱Machine table - usable table surface 514 x 360 mm︱T-Slots Amount - Width - Distance 2 x 14 x 224 mm︱Distance spindle - machine table min./max. 117 / 701 mm︱feed 0,10 + 0,20 mm/U︱spindle turning speed range 160 - 2250 UpM︱total power requirement 1,45 / 1,9 kW︱height of the machine 1840 mm︱weight of the machine ca. 285 kg︱
          Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right-left rotation - Motor protection switch - Speed adjustment stepless - Speed display digital - Feed overload protection - Protection IP 54 - Connector (fully assembled, cable length 2 m) - Spindle protection with electrical protection Pos. 25 Coolant device B, consisting of: separate container (33l), Pump with motor protection switch, complete fitting
            Drilling capacity in St 60 40 mm
            threading in St 60 M 24 mm
            threading in GG 20 M 30
            bore stroke 120 mm
            Short spindle MK 3
            throat 293 mm
            column diameter 115 mm
            Machine table - usable table sur. 514 x 360 mm
            T-Slots Amount - Width - Distanc. 2 x 14 x 224 mm
            Distance spindle - machine table. 117 / 701 mm
            feed 0,10 + 0,20 mm/U
            spindle turning speed range 160 - 2250 UpM
            total power requirement 1,45 / 1,9 kW
            height of the machine 1840 mm
            weight of the machine ca. 285 kg
            Description :
            Standard equipment:
            - Mushroom pushbutton (latching) for EMERGENCY STOP
            - Reversing switch for right-left rotation
            - Motor protection switch
            - Speed adjustment stepless
            - Speed display digital
            - Feed overload protection
            - Protection IP 54
            - Connector (fully assembled, cable length 2 m)
            - Spindle protection with electrical protection

            Pos. 25
            Coolant device B, consisting of: separate container (33l),
            Pump with motor protection switch, complete fitting


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine ALZMETALL AB 3


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-23541 · Pillar Drilling Machine

          ALZMETALL - AB 3 - - 1981 -

          Technical details
          bore capacity in steel (diameter) 30 mm︱throat 290 mm︱bore stroke 150 mm︱taper MK 3 MK︱table-size 320 x 370 mm︱thread boring diameter mm︱feeds mm/U︱turning speeds 80 - 1400 U/min︱total power requirement 2,0 KW︱weight of the machine ca. 0,35 t︱dimensions 0,6 x 0,8 x 1,95 m︱
          Column drilling machine with: - variable spindle speed - Machine light
            bore capacity in steel (diameter. 30 mm
            throat 290 mm
            bore stroke 150 mm
            taper MK 3 MK
            table-size 320 x 370 mm
            turning speeds 80 - 1400 U/min
            total power requirement 2,0 KW
            weight of the machine ca. 0,35 t
            dimensions 0,6 x 0,8 x 1,95 m
            Description :
            Column drilling machine with:
            - variable spindle speed
            - Machine light


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine HBM HBM 32


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76240 · Pillar Drilling Machine

          HBM - HBM 32 - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 32 mm︱throat 200 mm︱bore stroke 120 mm︱spindle taper MT 4 MK︱table: 290 x 270 mm︱column diameter 92 mm︱turning speeds 150 - 2450 U/min︱feeds 0 mm/U︱total power requirement 1,1 kW︱weight of the machine ca. 95 kg︱range L-W-H 0,66 x 0,8 x 1,7 m︱
          Column drilling machine with: ARBO / CE approved protective cover. Quick release chuck with pin. Tiltable work table. Deep stop. Ejector wedge.
            bore capacity in steel (diameter. 32 mm
            throat 200 mm
            bore stroke 120 mm
            spindle taper MT 4 MK
            table: 290 x 270 mm
            column diameter 92 mm
            turning speeds 150 - 2450 U/min
            total power requirement 1,1 kW
            weight of the machine ca. 95 kg
            range L-W-H 0,66 x 0,8 x 1,7 m
            Description :
            Column drilling machine with:
            ARBO / CE approved protective cover.
            Quick release chuck with pin.
            Tiltable work table.
            Deep stop.
            Ejector wedge.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine HBM HBM 30 Profi


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76241 · Pillar Drilling Machine

          HBM - HBM 30 Profi - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 30 mm︱throat 250 mm︱bore stroke 130 mm︱spindle taper MT 3 MK︱table: 380 x 380 mm︱column diameter 98 mm︱turning speeds 75 - 3200 U/min︱feeds mm/U︱total power requirement 1,1 kW︱weight of the machine ca. 220 kg.︱range L-W-H 0,5 x 0,6 x 2,05 mm︱
          • machine base for clamping high workpieces • Digital Depth Gauge • Gearbox swivels 180 ° • silent running through geärtete, ground oil-cooled gears • Tapping Function • electromagnetic clutch for drill feed • automatic feed • electric drive for table height adjustment
            bore capacity in steel (diameter. 30 mm
            throat 250 mm
            bore stroke 130 mm
            spindle taper MT 3 MK
            table: 380 x 380 mm
            column diameter 98 mm
            turning speeds 75 - 3200 U/min
            total power requirement 1,1 kW
            weight of the machine ca. 220 kg.
            range L-W-H 0,5 x 0,6 x 2,05 mm
            Description :
            • machine base for clamping high workpieces
            • Digital Depth Gauge
            • Gearbox swivels 180 °
            • silent running through geärtete, ground oil-cooled gears
            • Tapping Function
            • electromagnetic clutch for drill feed
            • automatic feed
            • electric drive for table height adjustment


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine KAMI BKM 5032


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76231 · Pillar Drilling Machine

          KAMI - BKM 5032 - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 32 mm︱throat 320 mm︱bore stroke 155 mm︱spindle taper MT 4 MK︱table: 500 x 420 mm︱column diameter 120 mm︱turning speeds 125 - 3030 U/min︱feeds 0,1 - 0,2 - 0,3 mm/U︱total power requirement 1,2 kW︱weight of the machine ca. 540 kg.︱range L-W-H 0,8 x 0,55 x 2,2 mm︱
          • machine base for clamping high workpieces • Digital Depth Gauge • Gearbox swivels 180 ° • silent running through geärtete, ground oil-cooled gears • Tapping Function • electromagnetic clutch for drill feed • automatic feed • electric drive for table height adjustment
            bore capacity in steel (diameter. 32 mm
            throat 320 mm
            bore stroke 155 mm
            spindle taper MT 4 MK
            table: 500 x 420 mm
            column diameter 120 mm
            turning speeds 125 - 3030 U/min
            feeds 0,1 - 0,2 - 0,3 mm/U
            total power requirement 1,2 kW
            weight of the machine ca. 540 kg.
            range L-W-H 0,8 x 0,55 x 2,2 mm
            Description :
            • machine base for clamping high workpieces
            • Digital Depth Gauge
            • Gearbox swivels 180 °
            • silent running through geärtete, ground oil-cooled gears
            • Tapping Function
            • electromagnetic clutch for drill feed
            • automatic feed
            • electric drive for table height adjustment


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine KAMI BKM 3035VS


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76234 · Pillar Drilling Machine

          KAMI - BKM 3035VS - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 32 mm︱throat 320 mm︱bore stroke 160 mm︱spindle taper MT 4 MK︱table: 500 x 420 mm︱column diameter 120 mm︱turning speeds 85 - 1800 U/min︱feeds 0,1 - 0,2 - 0,3 mm/U︱total power requirement 0,85 / 1,5 kW︱weight of the machine ca. 500 kg.︱range L-W-H 965 x 515 x 1920 mm︱
            bore capacity in steel (diameter. 32 mm
            throat 320 mm
            bore stroke 160 mm
            spindle taper MT 4 MK
            table: 500 x 420 mm
            column diameter 120 mm
            turning speeds 85 - 1800 U/min
            feeds 0,1 - 0,2 - 0,3 mm/U
            total power requirement 0,85 / 1,5 kW
            weight of the machine ca. 500 kg.
            range L-W-H 965 x 515 x 1920 mm


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine UWM UWM 32 A


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76250 · Pillar Drilling Machine

          UWM - UWM 32 A - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 32 mm︱throat 257 mm︱bore stroke 115 mm︱boring spindle MK 4 ︱boring chuck 16 mm︱bore depth 120 mm︱table surface area 475 x 425 mm︱column diameter 92 mm︱total power requirement 1,1 kW︱weight of the machine ca. 0,135 t︱dimensions of the machine ca. 0,75 x 0,85 x 1,72 m︱
          Sturdy bench drill with - Keyless chuck - Drilling depth setting - emergency stop - Rotatable table top
            bore capacity in steel (diameter. 32 mm
            throat 257 mm
            bore stroke 115 mm
            boring spindle MK 4
            boring chuck 16 mm
            bore depth 120 mm
            table surface area 475 x 425 mm
            column diameter 92 mm
            total power requirement 1,1 kW
            weight of the machine ca. 0,135 t
            dimensions of the machine ca. 0,75 x 0,85 x 1,72 m
            Description :
            Sturdy bench drill with
            - Keyless chuck
            - Drilling depth setting
            - emergency stop
            - Rotatable table top


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine KAMI BKM 5040 L


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76235 · Pillar Drilling Machine

          KAMI - BKM 5040 L - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 40 mm︱throat 350 mm︱bore stroke 180 mm︱spindle taper MT 4 MK︱table: 560 x 560 mm︱column diameter 150 mm︱turning speeds 1450 U/min︱feeds 0,1 - 0,2 mm/U︱total power requirement 1,5 kW︱weight of the machine ca. 700 kg.︱range L-W-H 1,1 x 0,6 x 2,35 mm︱
          • machine base for clamping high workpieces • Digital Depth Gauge • Gearbox swivels 180 ° • silent running through geärtete, ground oil-cooled gears • Tapping Function • electromagnetic clutch for drill feed • automatic feed • electric drive for table height adjustment
            bore capacity in steel (diameter. 40 mm
            throat 350 mm
            bore stroke 180 mm
            spindle taper MT 4 MK
            table: 560 x 560 mm
            column diameter 150 mm
            turning speeds 1450 U/min
            feeds 0,1 - 0,2 mm/U
            total power requirement 1,5 kW
            weight of the machine ca. 700 kg.
            range L-W-H 1,1 x 0,6 x 2,35 mm
            Description :
            • machine base for clamping high workpieces
            • Digital Depth Gauge
            • Gearbox swivels 180 °
            • silent running through geärtete, ground oil-cooled gears
            • Tapping Function
            • electromagnetic clutch for drill feed
            • automatic feed
            • electric drive for table height adjustment


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine UWM UWM 28A


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76253 · Pillar Drilling Machine

          UWM - UWM 28A - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 28 mm︱throat 320 mm︱bore stroke 150 mm︱spindle taper MT 3 MK︱table: 500 x 350 mm︱column diameter 105 mm︱turning speeds 75 - 3010 U/min︱total power requirement 0,9 / 1,2 kW︱weight of the machine ca. 235 kg.︱range L-W-H 1740 x 670 x 850 mm︱
            bore capacity in steel (diameter. 28 mm
            throat 320 mm
            bore stroke 150 mm
            spindle taper MT 3 MK
            table: 500 x 350 mm
            column diameter 105 mm
            turning speeds 75 - 3010 U/min
            total power requirement 0,9 / 1,2 kW
            weight of the machine ca. 235 kg.
            range L-W-H 1740 x 670 x 850 mm


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine HBM HBM 5040


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76245 · Pillar Drilling Machine

          HBM - HBM 5040 - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 40 mm︱throat 350 mm︱bore stroke 180 mm︱spindle taper MT 4 MK︱table: 560 x 560 mm︱column diameter 140 mm︱turning speeds 50 - 1450 U/min︱feeds 0,1 - 0,2 mm/U︱total power requirement 1,5 kW︱weight of the machine ca. 580 kg︱range L-W-H 2,27 x 0,7 x 1,1 mm︱
          • machine base for clamping high workpieces • Digital Depth Gauge • Gearbox swivels 180 ° • silent running through geärtete, ground oil-cooled gears • Tapping Function • electromagnetic clutch for drill feed • automatic feed • electric drive for table height adjustment
            bore capacity in steel (diameter. 40 mm
            throat 350 mm
            bore stroke 180 mm
            spindle taper MT 4 MK
            table: 560 x 560 mm
            column diameter 140 mm
            turning speeds 50 - 1450 U/min
            feeds 0,1 - 0,2 mm/U
            total power requirement 1,5 kW
            weight of the machine ca. 580 kg
            range L-W-H 2,27 x 0,7 x 1,1 mm
            Description :
            • machine base for clamping high workpieces
            • Digital Depth Gauge
            • Gearbox swivels 180 °
            • silent running through geärtete, ground oil-cooled gears
            • Tapping Function
            • electromagnetic clutch for drill feed
            • automatic feed
            • electric drive for table height adjustment


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine KAMI BKM 5030


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76230 · Pillar Drilling Machine

          KAMI - BKM 5030 - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 30 mm︱throat 260 mm︱bore stroke 135 mm︱spindle taper MT 3 MK︱table: 420 x 350 mm︱column diameter 135 mm︱turning speeds 125 - 3030 U/min︱feeds 0,1 - 0,2 - 0,3 mm/U︱total power requirement 1,1 kW︱weight of the machine ca. 380 kg.︱range L-W-H 0,9 x 0,55 x 2,2 mm︱
          High-quality drill press with a high speed range for the industrial use.
            bore capacity in steel (diameter. 30 mm
            throat 260 mm
            bore stroke 135 mm
            spindle taper MT 3 MK
            table: 420 x 350 mm
            column diameter 135 mm
            turning speeds 125 - 3030 U/min
            feeds 0,1 - 0,2 - 0,3 mm/U
            total power requirement 1,1 kW
            weight of the machine ca. 380 kg.
            range L-W-H 0,9 x 0,55 x 2,2 mm
            Description :
            High-quality drill press with a high speed range for the
            industrial use.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine HBM HBM 40 delux


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76243 · Pillar Drilling Machine

          HBM - HBM 40 delux - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 40 mm︱throat 300 mm︱bore stroke 120 mm︱spindle taper MT 4 MK︱table: 500 x 460 mm︱column diameter 115 mm︱turning speeds 75- 3200 U/min︱feeds 0,1 - 0,18 - 0,26 mm/U︱total power requirement 1,5 kW︱weight of the machine ca. 350 kg︱range L-W-H 2,2 x 0,8 x 0,7 mm︱
          • machine base for clamping high workpieces • Digital Depth Gauge • Gearbox swivels 180 ° • silent running through geärtete, ground oil-cooled gears • Tapping Function • electromagnetic clutch for drill feed • automatic feed • electric drive for table height adjustment
            bore capacity in steel (diameter. 40 mm
            throat 300 mm
            bore stroke 120 mm
            spindle taper MT 4 MK
            table: 500 x 460 mm
            column diameter 115 mm
            turning speeds 75- 3200 U/min
            feeds 0,1 - 0,18 - 0,26 mm/U
            total power requirement 1,5 kW
            weight of the machine ca. 350 kg
            range L-W-H 2,2 x 0,8 x 0,7 mm
            Description :
            • machine base for clamping high workpieces
            • Digital Depth Gauge
            • Gearbox swivels 180 °
            • silent running through geärtete, ground oil-cooled gears
            • Tapping Function
            • electromagnetic clutch for drill feed
            • automatic feed
            • electric drive for table height adjustment


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine KAMI BKM 5040


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76236 · Pillar Drilling Machine

          KAMI - BKM 5040 - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 40 mm︱throat 370 mm︱bore stroke 200 mm︱spindle taper MT 4 MK︱table: 580 x 460 mm︱column diameter 160 mm︱turning speeds 75 - 2020 U/min︱feeds 0,1 - 0,2 - 0,3 - 0,4 mm/U︱total power requirement 1,5 kW︱weight of the machine ca. 700 kg.︱range L-W-H 1,1 x 0,6 x 2,35 mm︱
          • machine base for clamping high workpieces • Digital Depth Gauge • Gearbox swivels 180 ° • silent running through geärtete, ground oil-cooled gears • Tapping Function • electromagnetic clutch for drill feed • automatic feed • electric drive for table height adjustment
            bore capacity in steel (diameter. 40 mm
            throat 370 mm
            bore stroke 200 mm
            spindle taper MT 4 MK
            table: 580 x 460 mm
            column diameter 160 mm
            turning speeds 75 - 2020 U/min
            feeds 0,1 - 0,2 - 0,3 - 0,4 mm/U
            total power requirement 1,5 kW
            weight of the machine ca. 700 kg.
            range L-W-H 1,1 x 0,6 x 2,35 mm
            Description :
            • machine base for clamping high workpieces
            • Digital Depth Gauge
            • Gearbox swivels 180 °
            • silent running through geärtete, ground oil-cooled gears
            • Tapping Function
            • electromagnetic clutch for drill feed
            • automatic feed
            • electric drive for table height adjustment


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine UWM UWM 40T


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76254 · Pillar Drilling Machine

          UWM - UWM 40T - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 40 mm︱throat 330 mm︱bore stroke 190 mm︱spindle taper MT 4 MK︱table: 500 x 400 mm︱column diameter 140 mm︱turning speeds 90 - 1500 U/min︱total power requirement 2,2 kW︱weight of the machine ca. 435 kg.︱range L-W-H 570 x 930 x 2170 mm︱
            bore capacity in steel (diameter. 40 mm
            throat 330 mm
            bore stroke 190 mm
            spindle taper MT 4 MK
            table: 500 x 400 mm
            column diameter 140 mm
            turning speeds 90 - 1500 U/min
            total power requirement 2,2 kW
            weight of the machine ca. 435 kg.
            range L-W-H 570 x 930 x 2170 mm


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine MAXION UNIMAX 3 TAP


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76210 · Pillar Drilling Machine

          MAXION - UNIMAX 3 TAP - - -NEU- -

          Technical details
          bore capacity in steel 30 mm︱threading cutting capacity: M20 ︱throat 260 mm︱bore stroke 125 mm︱spindle taper MK 3 ︱feed range - spindle 0 mm/U︱spindle turning speed range 80 - 1440 / 180 -3200 U/min︱transmission ratio 2 Stufen︱column diameter 110 mm︱table surface area 500 x 365 mm︱total power requirement 0,8 / 1,4 kW︱weight of the machine ca. 0,27 t︱dimensions of the machine ca. 0,4 x 1,2 x 1,9 m︱
          Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark
            bore capacity in steel 30 mm
            threading cutting capacity: M20
            throat 260 mm
            bore stroke 125 mm
            spindle taper MK 3
            spindle turning speed range 80 - 1440 / 180 -3200 U/min
            transmission ratio 2 Stufen
            column diameter 110 mm
            table surface area 500 x 365 mm
            total power requirement 0,8 / 1,4 kW
            weight of the machine ca. 0,27 t
            dimensions of the machine ca. 0,4 x 1,2 x 1,9 m
            Description :
            Equipment:
            - Gears made of hardened and ground steel
            - Front speed selector lever
            - Gear lubrication by automatic oil pump
            - Integrated coolant device
            - Machine lamp
            - Rotatable and tiltable table
            - Automatic feed with electromagnetic clutch
            - Handwheel for manual fine feed
            - automatic tool ejector
            - Integrated electrical controls in the drill head
            - Pushbutton for EMERGENCY STOP
            - Switch for right / left rotation
            - Height-adjustable chip protection hood with microswitch
            - CE mark


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine MAXION UNIMAX 3


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76212 · Pillar Drilling Machine

          MAXION - UNIMAX 3 - - -NEU- -

          Technical details
          bore capacity in steel 30 mm︱threading cutting capacity: M20 ︱throat 260 mm︱bore stroke 125 mm︱spindle taper MK 3 ︱spindle turning speed range 80 - 1440 / 180 -3200 U/min︱transmission ratio 2 Stufen︱column diameter 110 mm︱table surface area 500 x 365 mm︱total power requirement 0,8 / 1,4 kW︱weight of the machine ca. 0,27 t︱dimensions of the machine ca. 0,4 x 1,2 x 1,9 m︱
          Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark
            bore capacity in steel 30 mm
            threading cutting capacity: M20
            throat 260 mm
            bore stroke 125 mm
            spindle taper MK 3
            spindle turning speed range 80 - 1440 / 180 -3200 U/min
            transmission ratio 2 Stufen
            column diameter 110 mm
            table surface area 500 x 365 mm
            total power requirement 0,8 / 1,4 kW
            weight of the machine ca. 0,27 t
            dimensions of the machine ca. 0,4 x 1,2 x 1,9 m
            Description :
            Equipment:
            - Gears made of hardened and ground steel
            - Front speed selector lever
            - Gear lubrication by automatic oil pump
            - Integrated coolant device
            - Machine lamp
            - Rotatable and tiltable table
            - Automatic feed with electromagnetic clutch
            - Handwheel for manual fine feed
            - automatic tool ejector
            - Integrated electrical controls in the drill head
            - Pushbutton for EMERGENCY STOP
            - Switch for right / left rotation
            - Height-adjustable chip protection hood with microswitch
            - CE mark


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine MAXION UNIMAX 4 Basic


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76214 · Pillar Drilling Machine

          MAXION - UNIMAX 4 Basic - - -NEU- -

          Technical details
          bore capacity in steel 40 mm︱threading cutting capacity: M30 ︱throat 310 mm︱bore stroke 175 mm︱spindle taper MK 4 ︱feed range - spindle 20 - 400 mm/U︱spindle turning speed range 60 - 1250 / 120 -2500 U/min︱transmission ratio 2 Stufen︱column diameter 120 mm︱table surface area 550 x 400 mm︱total power requirement 1,5 / 3,0 kW︱weight of the machine ca. 0,45 t︱dimensions of the machine ca. 0,7 x 1,4 x 2,0 m︱
          Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark
            bore capacity in steel 40 mm
            threading cutting capacity: M30
            throat 310 mm
            bore stroke 175 mm
            spindle taper MK 4
            feed range - spindle 20 - 400 mm/U
            spindle turning speed range 60 - 1250 / 120 -2500 U/min
            transmission ratio 2 Stufen
            column diameter 120 mm
            table surface area 550 x 400 mm
            total power requirement 1,5 / 3,0 kW
            weight of the machine ca. 0,45 t
            dimensions of the machine ca. 0,7 x 1,4 x 2,0 m
            Description :
            Equipment:
            - Gears made of hardened and ground steel
            - Front speed selector lever
            - Gear lubrication by automatic oil pump
            - Integrated coolant device
            - Machine lamp
            - Rotatable and tiltable table
            - Automatic feed with electromagnetic clutch
            - Handwheel for manual fine feed
            - automatic tool ejector
            - Integrated electrical controls in the drill head
            - Pushbutton for EMERGENCY STOP
            - Switch for right / left rotation
            - Height-adjustable chip protection hood with microswitch
            - CE mark


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine IBERDRILL B 50


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76223 · Pillar Drilling Machine

          IBERDRILL - B 50 - - -NEU- -

          Technical details
          bore capacity in steel (diameter) 50 mm︱bore capacity in cast iron (diameter) 60 mm︱threading cutting capacity: M36 ︱throat 400 mm︱bore stroke 230 mm︱spindle taper MK 4 ︱feed range - spindle 0,1-0,2-0,3-0,4-0,5-0,6 mm/U︱spindle turning speed range 54 - 1032 U/min︱transmission ratio 12 Stufen︱column diameter 200 mm︱table surface area 550 x 550 mm︱total power requirement 3,0 kW︱weight of the machine ca. 0,72 t︱dimensions of the machine ca. 0,6 x 1,2 x 2,6 m︱
          Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark
            bore capacity in steel (diameter. 50 mm
            bore capacity in cast iron (diam. 60 mm
            threading cutting capacity: M36
            throat 400 mm
            bore stroke 230 mm
            spindle taper MK 4
            feed range - spindle 0,1-0,2-0,3-0,4-0,5-0,6 mm/U
            spindle turning speed range 54 - 1032 U/min
            transmission ratio 12 Stufen
            column diameter 200 mm
            table surface area 550 x 550 mm
            total power requirement 3,0 kW
            weight of the machine ca. 0,72 t
            dimensions of the machine ca. 0,6 x 1,2 x 2,6 m
            Description :
            Equipment:
            - Gears made of hardened and ground steel
            - Front speed selector lever
            - Gear lubrication by automatic oil pump
            - Integrated coolant device
            - Machine lamp
            - Rotatable and tiltable table
            - Automatic feed with electromagnetic clutch
            - Handwheel for manual fine feed
            - automatic tool ejector
            - Integrated electrical controls in the drill head
            - Pushbutton for EMERGENCY STOP
            - Switch for right / left rotation
            - Height-adjustable chip protection hood with microswitch
            - CE mark


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine IBERDRILL B 60


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76224 · Pillar Drilling Machine

          IBERDRILL - B 60 - - -NEU- -

          Technical details
          bore capacity in steel (diameter) 60 mm︱bore capacity in cast iron (diameter) 70 mm︱threading cutting capacity: M50 ︱throat 420 mm︱bore stroke 260 mm︱spindle taper MK 5 ︱feed range - spindle 0,1-0,2-0,3-0,4-0,5-0,6 mm/U︱spindle turning speed range 64 - 1210 U/min︱transmission ratio 12 Stufen︱column diameter 220 mm︱table surface area 600 x 600 mm︱total power requirement 4 kW︱weight of the machine ca. 0,82 t︱dimensions of the machine ca. 0,7 x 1,2 x 2,7 m︱
          Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark
            bore capacity in steel (diameter. 60 mm
            bore capacity in cast iron (diam. 70 mm
            threading cutting capacity: M50
            throat 420 mm
            bore stroke 260 mm
            spindle taper MK 5
            feed range - spindle 0,1-0,2-0,3-0,4-0,5-0,6 mm/U
            spindle turning speed range 64 - 1210 U/min
            transmission ratio 12 Stufen
            column diameter 220 mm
            table surface area 600 x 600 mm
            total power requirement 4 kW
            weight of the machine ca. 0,82 t
            dimensions of the machine ca. 0,7 x 1,2 x 2,7 m
            Description :
            Equipment:
            - Gears made of hardened and ground steel
            - Front speed selector lever
            - Gear lubrication by automatic oil pump
            - Integrated coolant device
            - Machine lamp
            - Rotatable and tiltable table
            - Automatic feed with electromagnetic clutch
            - Handwheel for manual fine feed
            - automatic tool ejector
            - Integrated electrical controls in the drill head
            - Pushbutton for EMERGENCY STOP
            - Switch for right / left rotation
            - Height-adjustable chip protection hood with microswitch
            - CE mark


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine MAXION UNIMAX 3 AV


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76211 · Pillar Drilling Machine

          MAXION - UNIMAX 3 AV - - -NEU- -

          Technical details
          bore capacity in steel 30 mm︱threading cutting capacity: M20 ︱throat 260 mm︱bore stroke 125 mm︱spindle taper MK 3 ︱feed range - spindle 30 - 400 mm/U︱spindle turning speed range 80 - 1440 / 180 -3200 U/min︱transmission ratio 2 Stufen︱column diameter 110 mm︱table surface area 500 x 365 mm︱total power requirement 0,8 / 1,4 kW︱weight of the machine ca. 0,27 t︱dimensions of the machine ca. 0,4 x 1,2 x 1,9 m︱
          Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark
            bore capacity in steel 30 mm
            threading cutting capacity: M20
            throat 260 mm
            bore stroke 125 mm
            spindle taper MK 3
            feed range - spindle 30 - 400 mm/U
            spindle turning speed range 80 - 1440 / 180 -3200 U/min
            transmission ratio 2 Stufen
            column diameter 110 mm
            table surface area 500 x 365 mm
            total power requirement 0,8 / 1,4 kW
            weight of the machine ca. 0,27 t
            dimensions of the machine ca. 0,4 x 1,2 x 1,9 m
            Description :
            Equipment:
            - Gears made of hardened and ground steel
            - Front speed selector lever
            - Gear lubrication by automatic oil pump
            - Integrated coolant device
            - Machine lamp
            - Rotatable and tiltable table
            - Automatic feed with electromagnetic clutch
            - Handwheel for manual fine feed
            - automatic tool ejector
            - Integrated electrical controls in the drill head
            - Pushbutton for EMERGENCY STOP
            - Switch for right / left rotation
            - Height-adjustable chip protection hood with microswitch
            - CE mark


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine WMW BS 40 B


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-23524 · Pillar Drilling Machine

          WMW - BS 40 B - - -

          Technical details
          bore capacity in steel (diameter) 50 mm︱throat 365 mm︱bore stroke 200 mm︱taper MK 4 MK︱table-size 660 mm︱feeds ja mm/U︱turning speeds 63 - 1000 U/min︱total power requirement 2,3 KW︱weight of the machine ca. 0,95 t︱dimensions 1,2 x 0,8 x 2,46 m︱
            bore capacity in steel (diameter. 50 mm
            throat 365 mm
            bore stroke 200 mm
            taper MK 4 MK
            table-size 660 mm
            feeds ja mm/U
            turning speeds 63 - 1000 U/min
            total power requirement 2,3 KW
            weight of the machine ca. 0,95 t
            dimensions 1,2 x 0,8 x 2,46 m
            Description :




        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine WEBO AV 40


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-23525 · Pillar Drilling Machine

          WEBO - AV 40 - - -

          Technical details
          bore capacity in steel (diameter) 40 mm︱throat 360 mm︱bore stroke 135 mm︱taper MK 4 MK︱table-size 630 mm︱feeds ja mm/U︱turning speeds 120 - 1120 U/min︱total power requirement 2,4 KW︱weight of the machine ca. 0,9 t︱dimensions 1,2 x 0,8 x 2,75 m︱
            bore capacity in steel (diameter. 40 mm
            throat 360 mm
            bore stroke 135 mm
            taper MK 4 MK
            table-size 630 mm
            feeds ja mm/U
            turning speeds 120 - 1120 U/min
            total power requirement 2,4 KW
            weight of the machine ca. 0,9 t
            dimensions 1,2 x 0,8 x 2,75 m
            Description :




        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine IXION BS 40 G


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-23537 · Pillar Drilling Machine

          IXION - BS 40 G - - -

          Technical details
          bore capacity in steel (diameter) 40 mm︱throat 300 mm︱bore stroke 170 mm︱turning speeds 70 - 1400 U/min︱ 600 x 450 mm︱total power requirement 3,0 KW︱tool taper MK 4 ︱feed 0,1 - 0,2 - 0,3 mm/U︱weight of the machine ca. 320 Kg︱dimensions 0,8 x 1,2 x 2,15 mm︱
          Column drill - Feed - Left/right rotation - Coolant pump - Vario speed
            bore capacity in steel (diameter. 40 mm
            throat 300 mm
            bore stroke 170 mm
            turning speeds 70 - 1400 U/min
            600 x 450 mm
            total power requirement 3,0 KW
            tool taper MK 4
            feed 0,1 - 0,2 - 0,3 mm/U
            weight of the machine ca. 320 Kg
            dimensions 0,8 x 1,2 x 2,15 mm
            Description :
            Column drill
            - Feed
            - Left/right rotation
            - Coolant pump
            - Vario speed


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          Pillar Drilling Machine: versatile and efficient!
          Find the best pillar drilling machine for your personal needs

          The term 'pillar drilling machine' encompasses a wide variety of different equipment suitable for different situations and materials. Pillar drilling machines also known as drill presses come in varying sizes from small machines for home use to larger models designed for industrial settings. Suited not only to wood but a large number of other materials pillar drilling machines are extremely versatile. LagerMaschinen is an ideal place to look for the best pillar drilling machine to fit both your needs and budget.

          Pillar drilling machines offer versatility and convenience

          A pillar drilling machine is extremely versatile. Whether you enjoy woodworking from home or require larger equipment for your business a pillar drilling machine serves a wide variety of functions. In contrast to a hand-held drill pillar drilling machines offer increased precision more powerful motors and the ability to perform additional functions like sanding or shaping. No matter what your needs are you can find an affordable pillar drilling machine quickly and easily at LagerMaschinen.

          Shopping at LagerMaschinen saves you both time and money

          One of the advantages of shopping for used machinery online is the convenience. Comparing prices and features can be time-consuming but LagerMaschinen takes all the hassle out of the shopping process. The user-friendly interface allows you to browse used machines by location price or design. If you're in the market for a pillar drilling machine or any other piece of industrial equipment check out LagerMaschinen and maximize both your time and your budget.