Pillar Drilling Machine

40 mm︱ M 24 ︱ M 30 ︱ MK 3 ︱bore stroke 120 mm︱throat 293 mm︱column diameter 115 mm︱ 514x360 mm︱ 2 x 14 x 224 mm︱ 117/701 mm︱feed 0,10 + 0,20 mm/U︱spindle turning speed range 160-2.250 UpM︱total power requirement 1,45/1,9 kW︱height of the machine 1840 mm︱weight of the machine ca. 285 kg︱

---

Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right-left rotation - Motor protection switch - Speed adjustment stepless - Speed display digital - Feed overload protection - Protection IP 54 - Connector (fully assembled, cable length 2 m) - Spindle protection with electrical protection

bore capacity in steel (diameter) 34 mm︱throat 300 mm︱bore stroke 150 mm︱bore capacity in cast iron (diameter) 40 mm︱thread capacity M 27 ︱spindle taper MT 4 ︱spindle speeds: Stufenlos 100 - 2000 U/min︱column diameter 125 mm︱automatic feeds 3 / 0,1 - 0,2 - 1,3 ︱table: 400 x 420 mm︱Drive Keilriemen ︱total power requirement 3 kW︱weight of the machine ca. 360 kg︱dimensions of the machine ca. 2,3 x 0,6x 1,1 m︱

---

- Drilling machine of circular column feed automaticmechanical - Drive by electronic wide V-belt - Spindle taper: CM 4 - Stepless speed adjustment with frequency converter - Potentiometer for speed adjustment - digital speed display - Automatic feed reversal when threading - Scale with adjustable drilling depth - automatic tool ejector - Push button for EMERGENCY STOP switch for right/left rotation - Electronic control integrated in the drill head - integrated coolant system - Machine light - height-adjustable chip protection disc with micro switch - fixed table - CE marking

bore capacity in steel (diameter) 50 mm︱bore capacity in cast iron (diameter) 60 mm︱threading cutting capacity: M42 ︱throat 360 mm︱bore stroke 200 mm︱spindle taper MK 4 ︱feed range - spindle 0,1-0,2-0,3-0,4 mm/U︱spindle turning speed range 190 - 1900 U/min︱column diameter 175 mm︱table surface area 550 x 550 mm︱total power requirement 4 kW︱weight of the machine ca. 0,85 t︱dimensions of the machine ca. 2,2 x 0,7 x 1,3 m︱

---

- large stepless speed range in 3 stages - mechanical speed adjustment with hand lever (model V) - electronic speed adjustment with frequency converter (model VE) - Front digital speed display - Gear lubrication by automatic oil pump “VE” - Machine base plate with integrated coolant device - Machine light - MGI rotating and tilting table - Advance and automatic retraction with electromagnetic clutch - Front hand wheel for fine adjustment of the manual feed - Scale with adjustable drilling depth - Automatic feed reversal when threading - automatic tool ejector - Electric controls integrated in the drill head - EMERGENCY STOP button - Switch for forward/reverse rotation - Height-adjustable chip protection disc with micro switch - CE marking

bore capacity in steel (diameter) 25 mm︱throat 209 mm︱bore stroke 95 mm︱ 3 ︱Motor output 12 ︱speeds 200 - 2440 U/min︱

---

Bench drill / 3020625TSET - Heavy execution of the whole machine - Very smooth running thanks to the new spindle design - industrial engine - Separate emergency stop impact switch - drilling depth stop - LED machine light integrated in the drill head - Precisely machined, stable drilling table with diagonal T-slots with a circumferential cooling water channel - Drilling table can be tilted ± 45 ° and rotated 360 ° - V-belt cover with safety switch - Precision spindle bore - Machine operation of safety electronics in 24 V DC voltage - Guaranteed concentricity = 0.02 mm measured in the drilling spindle - Thick-walled steel column for high force absorption and stability - Solid, large base plate with T-slots scope of delivery - Keyless chuck 0 - 16 mm - T-nuts - Expeller - Adapter MK 3-B16 - operating tool - BMP 100 machine vice

Drilling capacity in St 60 40 mm︱threading in St 60 M 24 mm︱threading in GG 20 M 30 ︱bore stroke 120 mm︱Short spindle MK 3 ︱throat 293 mm︱column diameter 115 mm︱Machine table - usable table surface 514x360 mm︱T-Slots Amount - Width - Distance 2 x 14 x 224 mm︱Distance spindle - machine table min./max. 117/701 mm︱feed 0,10 + 0,20 mm/U︱spindle turning speed range 160-2.250 UpM︱total power requirement 1,45/1,9 kW︱height of the machine 1840 mm︱

---

Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right-left rotation - Motor protection switch - Speed adjustment stepless - Speed display digital - Feed overload protection - Protection IP 54 - Connector (fully assembled, cable length 2 m) - Spindle protection with electrical protection Pos. 25 Coolant device B, consisting of: separate container (33l), Pump with motor protection switch, complete fitting

40 mm︱threading in St 60 M24 ︱threading in GG 20 M30 ︱ MK 3 ︱spindle stroke 120 mm︱ 160 - 2250 U/min.︱throat 293 mm︱column diameter 115 mm︱ 514 x 360 mm︱ 2 x 14 x 224 mm︱distance spindle /table min. 117 / max. 701 mm︱feed 0,1 + 0,2 mm/U︱height of the machine ca. 1840 mm︱weight of the machine ca. ca. 260 kg︱

---

Standard equipment: - 7" TFT LCD display with touch function: * Manual input of spindle speed set value * Actual speed display * Integrated drilling depth display with touch zero point transfer * Virtual drilling depth scale in the display * Machine status indicators and warnings on the display * Service information * Selectable operating language: DE/EN/FR/ES/IT/NL/RU - Thread cutting device, for thread cutting with stop, max. 6thread/min (thread cutting capacity depending on spindle speed), thread depth adjustable via depth stop and on the TFT LCD display (4 tools) - Infinitely variable speed adjustment via adjustment lever - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - anticlockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Clockwise and counter-clockwise rotation via contactor control - Control voltage 24 V, protection class IP 54 - Feed overload protection - Machine oil initial filling; oil bottle, supplied loose - Paint finish: DD textured paint signal white RAL 9003, PANTONE 7545c, black ***SPECIAL EQUIPMENT*** Item 20.5 FOOT SWITCH in addition to the SPINDLE-CUTTING DEVICE, for switching the direction of spindle rotation during the process Item 25. Coolant device B, consisting of: separate tank (33 l), pump with motor protection switch, complete armature motor protection switch, complete fitting

bore capacity in steel (diameter) 60 mm︱bore capacity in cast iron (diameter) 70 mm︱threading cutting capacity: M50 ︱throat 420 mm︱bore stroke 260 mm︱spindle taper MK 5 ︱feed range - spindle 0,1-0,2-0,3-0,4-0,5-0,6 mm/U︱spindle turning speed range 64 - 1210 U/min︱transmission ratio 12 Stufen︱column diameter 220 mm︱table surface area 600 x 600 mm︱total power requirement 4 kW︱weight of the machine ca. 0,82 t︱dimensions of the machine ca. 2,7 x 0,7 x 1,2 m︱

---

Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark * Inkl. IR/RS - (AUTOMATIC TURNING INVERSION FOR MANUAL TAPPING)

bore capacity in steel (diameter) 50 mm︱bore capacity in cast iron (diameter) 60 mm︱threading cutting capacity: M36 ︱throat 400 mm︱bore stroke 230 mm︱spindle taper MK 4 ︱feed range - spindle 0,1-0,2-0,3-0,4-0,5-0,6 mm/U︱spindle turning speed range 54 - 1032 U/min︱transmission ratio 12 Stufen︱column diameter 200 mm︱table surface area 550 x 550 mm︱total power requirement 3,0 kW︱weight of the machine ca. 0,72 t︱dimensions of the machine ca. 2,6 x 0,6 x 1,2 m︱

---

Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark * inkl. IR/RS - (AUTOMATIC TURNING INVERSION FOR MANUAL TAPPING)

bore capacity in steel St 60 25 mm︱Drilling capacity in St 60 30 mm︱threading in St 60 M 16 ︱ M 20 ︱Short spindle MK 3 ︱spindle stroke 140 mm︱throat 293 mm︱column diameter 115 mm︱Machine table - usable table surface 514x360 mm︱T-Slots Amount - Width - Distance 2x14x224 mm︱distance spindle - column min./max. 132/724 mm︱feed von Hand ︱0 stufenlos ︱Spindle Speed 225-4300 U/min.︱engine 1,0/1,6 kW︱voltage 400 V︱

---

Standard equipment: - 7" TFT LCD display with touch function: * Manual input of spindle speed set value * Actual speed display * Integrated drilling depth display with touch zero point transfer * Virtual drilling depth scale in the display * Machine status indicators and warnings on the display * Service information * Selectable operating language: DE/EN/FR/ES/IT/NL/RU - Thread cutting device, for thread cutting with stop, max. 6 threads/min (thread cutting capacity depending on spindle speed), thread depth adjustable via depth stop and on the TFT LCD display (4 tools) - Infinitely variable speed adjustment via adjustment lever - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - anticlockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Clockwise and counter-clockwise rotation via contactor control - Control voltage 24 V, protection class IP 54 - Paint finish: DD textured paint signal white RAL 9003, PANTONE 4545c, black Item 20.5 Foot switch in addition to the thread cutting device, for switching the direction of spindle rotation in the process. direction of rotation during the process Item 25. Coolant unit B, consisting of: separate container (33 l), pump with motor protection switch, complete armature motor protection switch, complete fitting Item 37.5 Technology calculator in the display The technology calculator guides you through the cutting task Determination of the cutting data using the following parameters: - Manufacturing process - Tool diameter - Cutting speed - Material table - Transfer function of the spindle speed as set value

bore capacity in steel (diameter) 25 mm︱throat 255 mm︱bore stroke 135 mm︱spindle turning speed range 8, von 105-2900 U/min︱table-size 500 x 350 mm︱column diameter 100 mm︱spindle taper MK 3 ︱total power requirement 0,65 / 0,9 kW︱weight of the machine ca. 190 kg︱dimensions of the machine ca. 0,5 x 0,5 x 1,7 m︱Electric 380 Volt ︱Drill chuck ︱

---

New gear machine, 2-stage right/left rotation, height-adjustable drilling head, Construction principle "Arboga - Sweden", maintenance-free gearbox with helical teeth Wheels, drill head and table are adjustable 360 ??degrees around the column,chip protection with electr. Switch, drilling depth indicator, warranty = 12 months. Machine dealer with own stock of 1600 m².

bore capacity in steel (diameter) 30 mm︱throat 320 mm︱bore stroke 135 mm︱spindle turning speed range 72 - 2600 U/min︱thread dia. M 20 mm︱feeds 0,1 - 0,2 - 0,3 mm/U︱spindle taper MT 3 ︱table surface area 370 x 360 mm︱Distance spindle/table max. 850 mm︱distance spindle/base plate 1400 mm︱voltage 400 V / 50 Hz︱total power requirement 1,0 - 1,5 kW︱weight of the machine ca. 0;5 t︱dimensions of the machine ca. 1,2 x 0,7 x 2,3 m︱

---

• with cooling device • threading attachment

bore capacity in steel (diameter) 40 mm︱throat 360 mm︱bore stroke 180 mm︱thread dia. M 27 mm︱spindle turning speed range 42 - 2050 U/min︱feeds 0,7-0,15-0,26-0,4 mm/U︱spindle taper MK4 ︱table surface area 450 x 440 mm︱Distance spindle/table max. 600 mm︱distance spindle/base plate 1200 mm︱voltage 400 V / 50 Hz︱total power requirement 2,8 kW︱weight of the machine ca. 0,75 t︱dimensions of the machine ca. 1,2 x 0,7 x 2,2 m︱

---

• with cooling device • threading attachment

bore capacity in steel (diameter) 70 mm︱throat 420 mm︱bore stroke 260 mm︱no. of turning speeds 12 ︱thread dia. M 50 mm︱spindle turning speed range 51 - 966 U/min︱feeds 0,05 - 0,3 (6x) mm/U︱spindle taper MT 5 ︱table surface area 600 x 600 mm︱Distance spindle/table max. max. 800 mm︱distance spindle/base plate 1200 mm︱column diameter 220 mm︱voltage 400 V / 50 Hz︱total power requirement 5,5 kW︱weight of the machine ca. 850 Kg︱dimensions of the machine ca. 1,2 x 0,7 x 2,4 m︱

---

- Gear wheels hardened and ground, - coolant device, - table adjustable, - automatic feed with mechanical clutch, - 2-step motor, - spindle with left-right rotation, - central lubrication, - machine lighting,

bore capacity in steel (diameter) 50 mm︱throat 350 mm︱bore stroke 180 mm︱thread dia. M 38 mm︱no. of turning speeds 9 ︱spindle turning speed range 132 - 1852 U/min︱feeds 0,05 - 0,3 (6x) mm/U︱spindle taper MK4 ︱table surface area 480 x 480 mm︱Distance spindle/table max. max. 800 mm︱distance spindle/base plate 1200 mm︱column diameter 150 mm︱voltage 400 V / 50 Hz︱total power requirement 3 kW︱weight of the machine ca. 450 Kg︱dimensions of the machine ca. 1,2 x 0,7 x 2,4 m︱

---

• Cooling device, • electric table height adjustment, • electromagnetic feed, • 2 speed motor, • spindle turns clockwise and counter clockwise, • rotating and tilting table, • machine worklight, • table clamped with eccentric clamp, • gear wheel driven.

bore capacity in steel (diameter) 32 mm︱throat 300 mm︱bore stroke 150 mm︱ MK 4 ︱ 480 x 480 mm︱ 0,1 - 0,2 mm/U︱ M 22 (St 60) ︱ 35 mm︱ 80-1170 U/min︱ 1,45 kW︱ 0,34 t︱ 0,8 x 1,0 x 2,0 m︱

---

*Exhibition machine, like NEW* (Machine was not yet in use) Accesories: -Machine light (built-in) -Coolant device in the foot (built-in)

bore capacity in steel (diameter) 26 mm︱throat 290 mm︱bore stroke 160 mm︱spindle turning speed - stepless 120-2200 U/min︱weight of the machine ca. 460 kg︱dimensions of the machine ca. 500 x 800 x 1900 mm︱

---

bore capacity in steel (diameter) 25 mm︱throat 225 mm︱ ︱total power requirement 0,75 kW︱weight of the machine ca. 0,3 t︱required space 0,7 x 0,7 x 1,8 m︱

---

bore capacity in steel (diameter) 25,0 / 30,0 mm︱throat 260 mm︱bore stroke 120 mm︱spindle taper 3 MK︱table: 500 x 350 mm︱T-slots 4x B 14.0 mm︱turning speeds 120 - 2160 U/min︱column diameter 110 mm︱distance spindle /table 90 - 760 mm︱total power requirement 0,7 / 1,3 kW︱weight 260 kg︱range L-W-H 900 x 900 x 1850 mm︱

---

** Machine from a vocational school ** very good condition (!!) TABLE DRILLING MACHINE / DRILLING HEAD HEIGHT ADJUSTABLE WITH CONSTANT TABLE HEIGHT Furnishing: - pole-changing motor - Continuous speed adjustment including analogue speed display - Spindle feed manually via cross handle - Drill head height adjustable, via hand crank - machined base plate with T-slots - adjustable drilling depth stop - Front main switch - Machine base including cabinet door * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9093639

bore capacity in steel (diameter) 40 mm︱throat 293 mm︱bore stroke 120 mm︱bore capacity in cast iron (diameter) 38 mm︱threading cutting capacity: M20/M30 ︱drive capacity - spindle motor 1,9 kW︱spindle taper MT 3 ︱turning speed range 160- 2250 U/min︱column diameter 115 mm︱table surface area 300 x 300 mm︱distance spindle /table 642 mm︱distance spindle/base plate 1207 mm︱dimensions 0,7 x 0,45 x 1,85 m︱weight 260 kg︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

Used Pillar Drilling Machine in very good condition. - stepless spindle speed - spindle left/right - Manual tapping (manual change direction of rotation) - Manuel Depth gauge

bore capacity in steel (diameter) 32 mm︱throat 300 mm︱bore stroke 150 mm︱bore capacity in cast iron 36 mm︱spindle taper MT 3 ︱spindle turning speed - stepless 140 - 1400 U/min︱table-size 500 x 360 mm︱column diameter 125 mm︱total power requirement 1,5 kW︱weight of the machine ca. 335 kg︱dimensions of the machine ca. 500 x 800 x 1850 mm︱

---

The machine comes from a training company and has been maintained more than second hand. The general condition is very good, all functions have been checked. Accesories: - Drill chuck - infinitely variable speeds - lighting

bore capacity in steel (diameter) 32 mm︱throat 320 mm︱bore stroke 170 mm︱taper MK 4 MK︱table-size 570 x 480 mm︱feeds 0,1 - 0,16 - 0,25 mm/U︱turning speeds 60 - 1600 U/min︱total power requirement 1,6 KW︱weight of the machine ca. 0,65 t︱dimensions 1,2 x 0,8 x 2,15 m︱

---

Column drilling machine with: - Feed - variable spindle speed - Coolant pump - Machine light

bore capacity in steel (diameter) 40 mm︱throat 280 mm︱bore stroke 180 mm︱taper MK 4 MK︱table-size 620 x 470 mm︱feeds 0,1 - 0,2 - 0,3 mm/U︱turning speeds 110 - 2900 U/min︱total power requirement 1,9 KW︱weight of the machine ca. 0,55 t︱dimensions 1,2 x 0,8 x 2,1 m︱

---

Column drilling machine with: - Feed - variable spindle speed - Coolant pump - Machine light

bore capacity in steel (diameter) 30 mm︱throat 300 mm︱bore stroke 150 mm︱cross-moving table 600 x 180 ︱total power requirement 1,5 kW︱weight of the machine ca. 1,1 t︱dimensions of the machine ca. 1,0 x 1,0 x 2,2 m︱

---

bore capacity in steel (diameter) 30 mm︱throat 260 mm︱bore stroke 120 mm︱spindle taper MT 3 ︱table-size 500 x 365 mm︱spindle turning speed range 120 - 5160 U/min︱feed range - boring 0,1 / 0,16 / 0,25 mm/U︱voltage 380 V︱total power requirement 0,65 / 1,2 kW︱

---