Vertical Turning Machine

Machinelist: Vertical Turning Machine

Vertical Turning Machine

STEINHAND GmbH
Am Stahlwerk 15
45527 Hattingen
Deutschland

+49 (0) 2324 / 977 26 - 01
+49 (0) 2324 / 977 26 - 99
info@steinhand.de
www.steinhand.de

#2026-1644 · Vertical Turning Machine

EMAG - VL2 - - 2014 -

Technical details

max. turning diameter 160 mm︱max. turning height 150 mm︱max. workpiece diameter 100 mm︱max. workpiece height 150 mm︱max. turning speeds 6.000 U/min︱travel -x axis 700 mm︱travel -z axis 375 mm︱c-axis 360 °︱

Vertical Turning Machine | EMAG - VL2 equipped with a workpiece conveyor belt. The machine is in very good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL-2 | VL 2

max. turning diameter 160 mm

max. turning height 150 mm

max. workpiece diameter 100 mm

max. workpiece height 150 mm

max. turning speeds 6.000 U/min

travel -x axis 700 mm

travel -z axis 375 mm

c-axis 360 °

Description :

Vertical Turning Machine | EMAG - VL2

equipped with a workpiece conveyor belt.

The machine is in very good condition.

Please note that the technical details
were added from comparable machines.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
#Tags: VL-2 | VL 2

Datasheet

used Lathes Vertical Turning Machine EMAG VL 7

Matthias Ehlers Werkzeugmaschinen
Nikolaus-Otto-Straße 19 + 21
22946 Trittau
Deutschland

+49 (0)4154 - 986 99 12
+49 (0)4154 - 986 99 14
anfrage@ehlers-wzm.de
www.ehlers-wzm.de

#2033-2022033 · Vertical Turning Machine

EMAG - VL 7 - - 2014 - Siemens 840DSL

Technical details

Control Siemens 840DSL ︱max. swing diameter 420 mm︱max. turning height 300 mm︱main spindle: ︱max. turning speeds 3400 min/-1︱drive capacity - main spindle 45 / 35 kW︱max. torque 775 / 600 Nm︱chucking diameter 315 / 400 mm︱tool turret: ︱number of tool places 12 Pos.︱Shank diameter 40 mm︱travel: ︱x-axis 850 mm︱z-axis 315 mm︱feeds: ︱rapid traverse (x/z) 45 / 30 m/min︱weight of the machine ca. 10,0 t︱dimensions of the machine ca. 4,2 x 1,5 x 3,5 m︱

In our opinion, the machine is in very good used condition and can be inspected under power by appointment. Technical features: - driven tools - c-axis - Capacity for pieces diameter 30 to 160 mm : 32 [pos] - Capacity for pieces diameter 120 to 220 mm : 24 [pos] - Capacity for pieces diameter 120 to 340 mm : 16 [pos] The scope of delivery of the machine does not include a clamping device. ***Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well as Subject to prior sale!***

Control Siemens 840DSL

max. swing diameter 420 mm

max. turning height 300 mm

max. turning speeds 3400 min/-1

drive capacity - main spindle 45 / 35 kW

max. torque 775 / 600 Nm

chucking diameter 315 / 400 mm

number of tool places 12 Pos.

Shank diameter 40 mm

x-axis 850 mm

z-axis 315 mm

rapid traverse (x/z) 45 / 30 m/min

weight of the machine ca. 10,0 t

dimensions of the machine ca. 4,2 x 1,5 x 3,5 m

Description :

In our opinion, the machine is in very good used condition
and can be inspected under power by appointment.

Technical features:
- driven tools
- c-axis
- Capacity for pieces diameter 30 to 160 mm : 32 [pos]
- Capacity for pieces diameter 120 to 220 mm : 24 [pos]
- Capacity for pieces diameter 120 to 340 mm : 16 [pos]

The scope of delivery of the machine does not include a clamping device.

***Accessories, tools and clamping devices shown are only part of the scope of
delivery
if this is noted in the additional information.***

***Changes and errors in the technical data and information as well as
Subject to prior sale!***

Datasheet

STEINHAND GmbH
Am Stahlwerk 15
45527 Hattingen
Deutschland

+49 (0) 2324 / 977 26 - 01
+49 (0) 2324 / 977 26 - 99
info@steinhand.de
www.steinhand.de

#2026-1646 · Vertical Turning Machine

EMAG - VL2 - - 2014 -

Technical details

max. turning diameter 160 mm

max. turning height 150 mm

max. workpiece diameter 100 mm

max. workpiece height 150 mm

max. turning speeds 6.000 U/min

travel -x axis 700 mm

travel -z axis 375 mm

c-axis 360 °

Description :

Vertical Turning Machine | EMAG - VL2

equipped with a workpiece conveyor belt.

The machine is in very good condition.

Please note that the technical details
were added from comparable machines.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
#Tags: VL-2 | VL 2

Datasheet

used Lathes Vertical Turning Machine EMAG VTC 250 DUO

Matthias Ehlers Werkzeugmaschinen
Nikolaus-Otto-Straße 19 + 21
22946 Trittau
Deutschland

+49 (0)4154 - 986 99 12
+49 (0)4154 - 986 99 14
anfrage@ehlers-wzm.de
www.ehlers-wzm.de

#2033-2023026 · Vertical Turning Machine

EMAG - VTC 250 DUO - - 2012 - Siemens 840 SL

Technical details

turning diameter 140 mm︱turning length 630 mm︱control Siemens 840 SL ︱max. swing diameter over bed 250 mm︱main spindle: ︱turning speed range - main spindle 0 - 5000 min/-1︱max. torque 256 Nm︱spindle bearing diameter 110 mm︱spindle bore 52 mm︱spindle head Gr. 6 DIN 55026 ︱chucking diameter max. 250 mm︱tool turret: ︱number of tool places 3 x 12 Pos.︱tool taper VDI 40 ︱max. tool weight 20 kg︱max. tool diameter 40 mm︱max. tool length 95 mm︱max. workpiece weight 20 kg︱max. workpiece diameter 140 mm︱travel: ︱

In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical features: - Siemens S120 drive systems - 3x turret, all places AGW, 2x of them with y - axis - 2x main spindle, 1x with tailstock - Spindles total 5 pcs. - Tool monitoring, Artis - Total electronic axes: 21 pcs. Accesories: - chip conveyor - Radio probe, Renishaw - Cooling unit - Infeed and outfeed conveyor - suction There are 2 identical machines available. ***Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well as Subject to prior sale!***

turning diameter 140 mm

turning length 630 mm

control Siemens 840 SL

max. swing diameter over bed 250 mm

turning speed range - main spind. 0 - 5000 min/-1

max. torque 256 Nm

spindle bearing diameter 110 mm

spindle bore 52 mm

spindle head Gr. 6 DIN 55026

chucking diameter max. 250 mm

number of tool places 3 x 12 Pos.

tool taper VDI 40

max. tool weight 20 kg

max. tool diameter 40 mm

max. tool length 95 mm

max. workpiece weight 20 kg

max. workpiece diameter 140 mm

Description :

In our opinion, the machine is in good used condition and can be inspected
under power by appointment.

Technical features:
- Siemens S120 drive systems
- 3x turret, all places AGW, 2x of them with y - axis
- 2x main spindle, 1x with tailstock
- Spindles total 5 pcs.
- Tool monitoring, Artis
- Total electronic axes: 21 pcs.

Accesories:
- chip conveyor
- Radio probe, Renishaw
- Cooling unit
- Infeed and outfeed conveyor
- suction

There are 2 identical machines available.

***Accessories, tools and clamping devices shown are only part of the scope of
delivery
if this is noted in the additional information.***

***Changes and errors in the technical data and information as well as
Subject to prior sale!***

Datasheet

Amann Werkzeugmaschinen GmbH
Landshuter Straße 1
85716 Unterschleißheim
Deutschland

(0049) 89 317754 0
(0049) 89 3174262
info@amann-wzm.de
www.amann-wzm.de

#1006-17859 · Vertical Turning Machine

EMAG - VTC 250 DUO - - 2008 - SIN840 PL

Technical details

turning diameter max. 140 mm︱swing diameter Futter / Chuck Ø 250 mm︱turning height 630 mm︱Control SIN840 PL ︱spindle turning speed - stepless 1 - 5.000 U/min︱power capacity at 40 % load 38,00 kW︱Spindle head DIN55026 - Size 6 ︱spindle diameter in front bearing 110 mm︱travel -x axis 300 mm︱feed X-axis 1 - 30.000 mm/min︱rapid traverse X-axis 30,00 m/min︱feed force X axis 9.000 N︱travel -z axis 700 mm︱feed Z-Axis 1 - 40.000 mm/min︱rapid traverse Z-axis 40,00 m/min︱feed force Z axis 10.000 N︱no. of tools in turret 1 12 ︱no. of tools in turret 2 12 ︱tool taper VDI 40 DIN 69880︱total power requirement 70 kW︱

turning diameter max. 140 mm

swing diameter Futter / Chuck Ø 250 mm

turning height 630 mm

Control SIN840 PL

spindle turning speed - stepless 1 - 5.000 U/min

power capacity at 40 % load 38,00 kW

Spindle head DIN55026 - Size 6

spindle diameter in front bearin. 110 mm

travel -x axis 300 mm

feed X-axis 1 - 30.000 mm/min

rapid traverse X-axis 30,00 m/min

feed force X axis 9.000 N

travel -z axis 700 mm

feed Z-Axis 1 - 40.000 mm/min

rapid traverse Z-axis 40,00 m/min

feed force Z axis 10.000 N

no. of tools in turret 1 12

no. of tools in turret 2 12

tool taper VDI 40 DIN 69880

total power requirement 70 kW

Description :

Datasheet

used Lathes Vertical Turning Machine EMAG VTC 250 DUO DD

STEINHAND GmbH
Am Stahlwerk 15
45527 Hattingen
Deutschland

+49 (0) 2324 / 977 26 - 01
+49 (0) 2324 / 977 26 - 99
info@steinhand.de
www.steinhand.de

#2026-1411 · Vertical Turning Machine

EMAG - VTC 250 DUO DD - - 2007 - Siemens 840-D

Technical details

control Siemens 840-D ︱tool taper HSK & VDI 40 ︱- - - - - - - - -︱

Vertical Turning Machine EMAG - VTC 250 DUO DD with ITC (7-30 bar) and driven tools Additional equipment: - Workpiece grippers on all 3 turrets - 12-position disc turret for driven tools and VDI 40 tool holders, - 12-station disc turret with cross-slot and VDI 40 tool holders, - 12-station disc turret for driven tools and VDI 40 tool holders, - NC steady rest, self-centering, - headstock below, - tailstock below, - chip conveyor - Knoll unit 1.500 l, - OP10: Three-jaw chuck Rhöm KFD-N 220/3, - OP20: Hainbuch Spanntop pull-back BZI65, - Live tool for axial and radial machining, - Tool holder with Capto 5 quick change system, - Artis as tool and process monitoring, The machine is in a well-maintained condition. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VTC250 | VTC-250 | VTC250DUO | VTC-250 DUO

control Siemens 840-D

tool taper HSK & VDI 40

- - - - - - - - -

Description :

Vertical Turning Machine EMAG - VTC 250 DUO DD with
ITC (7-30 bar) and driven tools

Additional equipment:

- Workpiece grippers on all 3 turrets
- 12-position disc turret for driven tools and VDI 40 tool holders,
- 12-station disc turret with cross-slot and VDI 40 tool holders,
- 12-station disc turret for driven tools and VDI 40 tool holders,
- NC steady rest, self-centering,
- headstock below,
- tailstock below,

- chip conveyor
- Knoll unit 1.500 l,

- OP10: Three-jaw chuck Rhöm KFD-N 220/3,
- OP20: Hainbuch Spanntop pull-back BZI65,
- Live tool for axial and radial machining,
- Tool holder with Capto 5 quick change system,
- Artis as tool and process monitoring,

The machine is in a well-maintained condition.

A machine video from the production plant will be shared on request.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
#Tags: VTC250 | VTC-250 | VTC250DUO | VTC-250 DUO

Datasheet

used Lathes Vertical Turning Machine EMAG VTC 250 DUO ED

STEINHAND GmbH
Am Stahlwerk 15
45527 Hattingen
Deutschland

+49 (0) 2324 / 977 26 - 01
+49 (0) 2324 / 977 26 - 99
info@steinhand.de
www.steinhand.de

#2026-1410 · Vertical Turning Machine

EMAG - VTC 250 DUO ED - - 2005 - Siemens 840-D

Technical details

control Siemens 840-D ︱tool taper HSK & VDI 40 ︱- - - - - - - - -︱

Vertical Turning Machine | EMAG - VTC 250 DUO ED with ITC (7-30 bar) and driven tools Additional equipment: - Workpiece grippers on all 3 turrets, - 6-station end-processing turret with HSK tool holder, - 12-station disc turret for driven tools and VDI 40 tool holder, - 12-position disc revolver with cross slot and VDI 40 tool holder, - NC - clamping head, - NC bezel, self-centering, - EMAG hydraulic double-piston clamping cylinder, - tailstock down, - Hydraulic double-piston clamping cylinder at the top, - chip conveyor, - Knoll plant 1.500 l, - Coolant supply 7-30 bar, - OP20: shaft chuck with retractable jaws and face drivers, - Tool holder with Capto 5, - Artis quick-change system for tool and process monitoring, - Tool pack is included, The machine is in a well-maintained condition. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VTC250 | VTC-250 | VTC250DUO | VTC-250 DUO

control Siemens 840-D

tool taper HSK & VDI 40

- - - - - - - - -

Description :

Vertical Turning Machine | EMAG - VTC 250 DUO ED
with ITC (7-30 bar) and driven tools

Additional equipment:

- Workpiece grippers on all 3 turrets,
- 6-station end-processing turret with HSK tool holder,
- 12-station disc turret for driven tools and VDI 40 tool holder,
- 12-position disc revolver with cross slot and VDI 40 tool holder,
- NC - clamping head,
- NC bezel, self-centering,
- EMAG hydraulic double-piston clamping cylinder,
- tailstock down,
- Hydraulic double-piston clamping cylinder at the top,
- chip conveyor,

- Knoll plant 1.500 l,
- Coolant supply 7-30 bar,

- OP20: shaft chuck with retractable jaws and face drivers,
- Tool holder with Capto 5,
- Artis quick-change system for tool and process monitoring,
- Tool pack is included,

The machine is in a well-maintained condition.

A machine video from the production plant will be shared on request.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
#Tags: VTC250 | VTC-250 | VTC250DUO | VTC-250 DUO

Datasheet

used Lathes Vertical Turning Machine EMAG VL5

SK Maschinen-Service GmbH
Tackweg 4
47918 Tönisvorst
Deutschland

02151 79350
02151 793535
info@sk-maschinen.de
www.sk-maschinen.de

#1038-20974 · Vertical Turning Machine

EMAG - VL5 - - 2001 - FANUC 18 i-T

Technical details

chucking diameter 250 mm︱swing diameter 260 mm︱travel -x axis 570 mm︱travel -z axis 200 mm︱control FANUC 18 i-T ︱Turning speeds mainspindle 4500 U/min︱numbers of positions in the tool changer 12 ︱Dimensions (L x W x H) 3.700 x 1.500 x 2.400 mm︱weight of the machine 6.500 kg︱main drive motor 15 kW︱turret 12 station VDI 40 ︱

machine is equipped with a closed standard autom. loader: for 12 workpieces 80 mm-220 mm for 14 workpieces 30 mm-160 mm for 28 workpieces 30 mm-85 mm max. total load 120 kg

chucking diameter 250 mm

swing diameter 260 mm

travel -x axis 570 mm

travel -z axis 200 mm

control FANUC 18 i-T

Turning speeds mainspindle 4500 U/min

numbers of positions in the tool. 12

Dimensions (L x W x H) 3.700 x 1.500 x 2.400 mm

weight of the machine 6.500 kg

main drive motor 15 kW

turret 12 station VDI 40

Description :

machine is equipped with a closed standard autom. loader:
for 12 workpieces 80 mm-220 mm
for 14 workpieces 30 mm-160 mm
for 28 workpieces 30 mm-85 mm
max. total load 120 kg

Datasheet

Find used measuring equipment and more at LagerMaschinen

Find the best in used machines at LagerMaschinen

The term 'measuring equipment' can refer to a range of different tools used to collect a diverse range of data. Conventional measuring equipment provides information about height, weight, distance, etc., while more sophisticated tools can be used to determine 3D dimensions, density, rigidity, smoothness and so on. Measuring equipment is also critical to a huge range of sectors from the automotive industry to the pharmaceutical manufacturing, from agriculture to construction. Find the best used measuring equipment at LagerMaschinen.

Measuring machines for every possible need

If you're in the market for industrial measuring equipment, you've come to the right place at LagerMaschinen. No matter what industry you specialize in, you'll be able to browse for measuring equipment to suit your specific business needs. In the field of metalworking, find used machines to measure the density, tensile strength or smoothness of your products. You can collect accurate data about structural dimensions if you work in the construction industry. Used machines are a great investment for anyone looking to save money without sacrificing quality.

Shopping online is a smart way to save time and money

Shopping online for used machines is the way of the future for industry professionals, business owners and home hobbyists alike. The days of spending endless hours on hold, sifting through hundreds of catalogues or travelling great distances to meet with sellers is a thing of the past. When you use LagerMaschinen's user-friendly interface, you guarantee yourself a hassle-free shopping experience. Sort results by price, location or model and find the best measuring equipment and more for your specific needs. It's never been easier.

TOP Manufacturer:

EMAG - INDEX - WEISSER - HESSAPP - KRAFT (YSP) - KRAFT - FELSOMAT - DMG GILDEMEISTER - FAMAR - TITAN ONSAL -