European network of stockholding machinery dealers

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:

          Heavy Duty Lathe

          Machinelist: Heavy Duty Lathe


          Heavy Duty Lathe

          used Lathes Heavy Duty Lathe FRORIEP SS 60 x 13000


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-15807 · Heavy Duty Lathe

          FRORIEP - SS 60 x 13000 - - ca. 1975 -

          Technical details
          turning diameter over bed 4000 mm︱turning diameter over slide rest 2200 mm︱turning length 13000 / 6500 mm︱centre distance 13000 mm︱faceplate yes mm︱workpiece weight 100 t︱steady 8 ︱Rest 2 ︱spindle bore 95 mm︱internal taper diameter 120 mm︱tailstock quill taper metric 120mm 60° ︱tailstock quill diameter 280 mm︱quill travel 450 mm︱total power requirement - kW︱
          Heavy Duty Lathe with 4-guides bed and is equipped with 2 cross-slides: - one is mounted on a chassis bed installed next to the main chassis of the lathe - one is mounted on an upper chassis bed on top of the main chassis of the lathe - the upper chassis bed is also movable on top of the main chassis of the lathe Max length of workpiece on main chassis: 13 meter Max length of workpiece on top of upper chassis bed: 6,5 meter Max swing in gap using main cross-slide: 4000 mm Max swing over bed using using secondary cross-slide: 2700 mm Max swing over cross-slide: 2220 mm - 8 Steadies
            turning diameter over bed 4000 mm
            turning diameter over slide rest 2200 mm
            turning length 13000 / 6500 mm
            centre distance 13000 mm
            faceplate yes mm
            workpiece weight 100 t
            steady 8
            Rest 2
            spindle bore 95 mm
            internal taper diameter 120 mm
            tailstock quill taper metric 120mm 60°
            tailstock quill diameter 280 mm
            quill travel 450 mm
            total power requirement - kW
            Description :
            Heavy Duty Lathe with 4-guides bed and is equipped with 2 cross-slides:
            - one is mounted on a chassis bed installed next to the main chassis of the
            lathe
            - one is mounted on an upper chassis bed on top of the main chassis of the lathe
            - the upper chassis bed is also movable on top of the main chassis of the lathe

            Max length of workpiece on main chassis: 13 meter
            Max length of workpiece on top of upper chassis bed: 6,5 meter
            Max swing in gap using main cross-slide: 4000 mm
            Max swing over bed using using secondary cross-slide: 2700 mm
            Max swing over cross-slide: 2220 mm
            - 8 Steadies


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Heavy Duty Lathe TOSHIBA LCS 40200A CNC


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-20235 · Heavy Duty Lathe

          TOSHIBA - LCS 40200A CNC - - 1976 /2009 - Fanuc 18i TB

          Technical details
          turning diameter over bed 5000 mm︱turning diameter over slide rest 4000 mm︱turning length 20000 mm︱faceplate diameter 3500 mm︱control Fanuc 18i TB ︱turning speeds 4 - 40 U/min︱workpiece weight max. 350 t︱main drive motor 485 kW︱longitudinal feeds: 0,3 - 120 mm/min︱cross feed 0,15 - 60 mm/min︱cutting capacity 20000 kp︱total power requirement - kW︱weight of the machine ca. 435 t︱dimensions of the machine ca. 30 x 9 x 5,5 m︱
          overhauled and modernized in 2008/2009, equipped with: - CNC control FANUC 18i TB - face plate - 2 slides with control unit - 2 heavy duty steady rests (200t support load each), dia: 600-2000mm - Hydrostatic bearing in spindle & tailstock - 5 lanes bed - chip conveyor - Coolant system - Tailstock with faceplate (dia. 3000mm)
            turning diameter over bed 5000 mm
            turning diameter over slide rest 4000 mm
            turning length 20000 mm
            faceplate diameter 3500 mm
            control Fanuc 18i TB
            turning speeds 4 - 40 U/min
            workpiece weight max. 350 t
            main drive motor 485 kW
            longitudinal feeds: 0,3 - 120 mm/min
            cross feed 0,15 - 60 mm/min
            cutting capacity 20000 kp
            total power requirement - kW
            weight of the machine ca. 435 t
            dimensions of the machine ca. 30 x 9 x 5,5 m
            Description :
            overhauled and modernized in 2008/2009, equipped with:
            - CNC control FANUC 18i TB
            - face plate
            - 2 slides with control unit
            - 2 heavy duty steady rests (200t support load each), dia: 600-2000mm
            - Hydrostatic bearing in spindle & tailstock
            - 5 lanes bed
            - chip conveyor
            - Coolant system
            - Tailstock with faceplate (dia. 3000mm)



        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Heavy Duty Lathe ZERBST DxP5/W15x15000


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18487 · Heavy Duty Lathe

          ZERBST - DxP5/W15x15000 - - 1959/2009 - Siemens 840 Dsl

          Technical details
          turning diameter over bed 3000 mm︱turning diameter over slide rest 2400 mm︱turning length 15000 mm︱spindle diameter in front bearing 750 mm︱spindle bore 220 mm︱faceplate diameter 3150 mm︱control Siemens 840 Dsl ︱accuracy +/- bis/up to: 0,01 mm︱spindle motor 110 kW︱faceplate speeds from - to 0,9 - 56 U/min︱workpiece weight max. 80000 kg︱max.workpiece weight:each extra steadyrest - kg︱tail stock ︱tailstock quill diameter 660 mm︱tailstock quill stroke 100 mm︱total power requirement 150 kVA︱weight of the machine ca. 60 t︱
          overhauled and modernized 2009 & 2012/2013 equipped with: - CNC control Siemens 840D SL ShopTurn - 2 supports with 1 controller each - 4-jaw face plate - 2 hydraulic steady rests (1760mm) - hydraulic tailstock Machine is dismantled and stored.
            turning diameter over bed 3000 mm
            turning diameter over slide rest 2400 mm
            turning length 15000 mm
            spindle diameter in front bearin. 750 mm
            spindle bore 220 mm
            faceplate diameter 3150 mm
            control Siemens 840 Dsl
            accuracy +/- bis/up to: 0,01 mm
            spindle motor 110 kW
            faceplate speeds from - to 0,9 - 56 U/min
            workpiece weight max. 80000 kg
            max.workpiece weight:each extra . - kg
            tailstock quill diameter 660 mm
            tailstock quill stroke 100 mm
            total power requirement 150 kVA
            weight of the machine ca. 60 t
            Description :
            overhauled and modernized 2009 & 2012/2013
            equipped with:
            - CNC control Siemens 840D SL ShopTurn
            - 2 supports with 1 controller each
            - 4-jaw face plate
            - 2 hydraulic steady rests (1760mm)
            - hydraulic tailstock

            Machine is dismantled and stored.


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          Find a new heavy duty lathe at LagerMaschinen!
          Use LagerMaschinen to easily find your next heavy duty lathe

          The lathe is a versatile and functional addition to both a home or industrial business. Whether you work with metal wood or ceramics a heavy duty lathe can serve a wide variety of functions. Drilling cutting and shaping are just a few of the capabilities of this multi-functional tool. Investing in a heavy-duty lathe will enhance the efficiency of any workplace a wide variety of makes and models are available at LagerMaschinen.

          A heavy duty lathe is essential to your workplace

          Historically the lathe has been in use since the days of the ancient Egyptians. And it's no wonder that this versatile machine has maintained popularity for millennia: from jewellery making to woodworking and metal machining the lathe plays a crucial role in a wide variety of different commercial and industrial fields. A heavy duty lathe is a smart investment for those looking for functionality and longevity in their tools. Find your next heavy duty lathe on LagerMaschinen's user-friendly forum.

          Save time and money buying used machines at LagerMaschinen

          Smart investors have long known the benefits of buying used rather than new equipment. Buying used equipment has a number of advantages for both business owners and hobbyists alike. You can make the most of your budget by buying lightly used machines which offer the same high-quality at a fraction of the price. Maximize your business' efficiency and its budget by searching for your next heavy duty lathe at LagerMaschinen. This easy-to-use forum for used machines makes the shopping experience an easy and hassle-free process.