European network of stockholding machinery dealers

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:

          Facing Lathe

          Machinelist: Facing Lathe


          Facing Lathe

          used Lathes Facing Lathe TADU FS 1250 CNC


          • Intermach BV
          • lange voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)653235637
          • info@intermach.nl
            www.intermach.nl
          #2050-1010063 · Facing Lathe

          TADU - FS 1250 CNC - - NB - FAGOR 8050 T

          Technical details
          faceplate diameter 1800 mm︱turning diameter over slide rest 2500 mm︱turning length mm︱Control FAGOR 8050 T ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Stocknumber 1010063 Type of machine CNC Facelathe Make TADU Type FS 1250 Build in nb Type of control FAGOR, 8050T Turnung diameter over bed 2500 mm Additional information 4-jaws chuck 1800 mm
            faceplate diameter 1800 mm
            turning diameter over slide rest 2500 mm
            Control FAGOR 8050 T
            Description :
            Stocknumber 1010063
            Type of machine CNC Facelathe
            Make TADU
            Type FS 1250
            Build in nb
            Type of control FAGOR, 8050T
            Turnung diameter over bed 2500 mm


            Additional information
            4-jaws chuck 1800 mm



        • Intermach BV
        • lange voor 71
        • 8316BC Marknesse
        • Niederlande

        • Datasheet
          Request / Contact
          used Lathes Facing Lathe SEIGER SPL-CG1400


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17807 · Facing Lathe

          SEIGER - SPL-CG1400 - - 2018 - ManualPlus 620

          Technical details
          turning diameter over slide rest 1.400 mm︱faceplate diameter 1.000 mm︱x-travel 740 mm︱z-travel 402 mm︱Control ManualPlus 620 ︱Turning Speed - Range 1 1 - 250 U/min.︱Turning Speed - Range 2 1 - 710 U/min.︱power capacity at 60% / 100 % load 46 / 38 KW︱torque max. 6.000 Nm︱feed capacity X/Z 14 / 18 kN︱feed x/z-axis 1 - 8.000 mm/min︱max. workpiece weight -without tailstock 19.000 kg︱spindle taper DIN55027 Gr. 15 ︱spindle bore 130 mm︱spindle diameter in front bearing 220 mm︱total power requirement 60,00 kW︱weight of the machine ca. 7,50 t︱dimensions of the machine ca. 4,00 x 2,50 x H2,50 m︱
          HEIDENHAIN ManualPlus 620 Hydraulic power clamping device 3-jaw chuck SMW Autobloc Ø 1000 mm 4-fold steel holder PARAT "manual"
            turning diameter over slide rest 1.400 mm
            faceplate diameter 1.000 mm
            x-travel 740 mm
            z-travel 402 mm
            Control ManualPlus 620
            Turning Speed - Range 1 1 - 250 U/min.
            Turning Speed - Range 2 1 - 710 U/min.
            power capacity at 60% / 100 % lo. 46 / 38 KW
            torque max. 6.000 Nm
            feed capacity X/Z 14 / 18 kN
            feed x/z-axis 1 - 8.000 mm/min
            max. workpiece weight -without t. 19.000 kg
            spindle taper DIN55027 Gr. 15
            spindle bore 130 mm
            spindle diameter in front bearin. 220 mm
            total power requirement 60,00 kW
            weight of the machine ca. 7,50 t
            dimensions of the machine ca. 4,00 x 2,50 x H2,50 m
            Description :
            HEIDENHAIN ManualPlus 620
            Hydraulic power clamping device
            3-jaw chuck SMW Autobloc Ø 1000 mm
            4-fold steel holder PARAT "manual"


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Facing Lathe SEIGER REKORD CG1400


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17806 · Facing Lathe

          SEIGER - REKORD CG1400 - - 2009 - ManualPlus 620

          Technical details
          turning diameter over slide rest 1400 mm︱faceplate diameter 1.000 mm︱x-travel 725 mm︱z-travel 400 mm︱Control ManualPlus 620 ︱Turning Speed - Range 1 5 - 250 U/min.︱Turning Speed - Range 2 5 - 710 U/min.︱total power requirement 55 kW︱weight of the machine ca. 6,5 t︱dimensions of the machine ca. 4,8 x 2,5 x 2,1 m︱
          4-fold steel holder PARAT "manual" Manually operated faceplate ROEHM 4 jaws Ø 1000 mm
            turning diameter over slide rest 1400 mm
            faceplate diameter 1.000 mm
            x-travel 725 mm
            z-travel 400 mm
            Control ManualPlus 620
            Turning Speed - Range 1 5 - 250 U/min.
            Turning Speed - Range 2 5 - 710 U/min.
            total power requirement 55 kW
            weight of the machine ca. 6,5 t
            dimensions of the machine ca. 4,8 x 2,5 x 2,1 m
            Description :
            4-fold steel holder PARAT "manual"
            Manually operated faceplate ROEHM 4 jaws Ø 1000 mm


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Facing Lathe POREBA TZG 250 A


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19718 · Facing Lathe

          POREBA - TZG 250 A - - 1992 -

          Technical details
          faceplate diameter 2000 mm︱turning diameter over plate 2500 mm︱workpiece width - max. 300 mm︱turning diameter in the pit 3200 mm︱turning speed range - faceplate 0,5 - 100 U/min︱feed range 800 mm/min︱steel cross cut max. 70 x 70 mm²︱spindle bore 105 mm︱spindle diameter in front bearing 320 mm︱headstock travel cross 1000 mm︱max. workpiece weight between centers 25000 kg︱max. workpiece weight -without tailstock 6000 kg︱cross slide - travel 450 mm︱upper slide-adjustment 700 mm︱total power requirement 35 kW︱weight of the machine ca. 20 t︱
          - Digital Read Out - Chip Conveyor - Hydr. Copy Attachment
            faceplate diameter 2000 mm
            turning diameter over plate 2500 mm
            workpiece width - max. 300 mm
            turning diameter in the pit 3200 mm
            turning speed range - faceplate 0,5 - 100 U/min
            feed range 800 mm/min
            steel cross cut max. 70 x 70 mm²
            spindle bore 105 mm
            spindle diameter in front bearin. 320 mm
            headstock travel cross 1000 mm
            max. workpiece weight between ce. 25000 kg
            max. workpiece weight -without t. 6000 kg
            cross slide - travel 450 mm
            upper slide-adjustment 700 mm
            total power requirement 35 kW
            weight of the machine ca. 20 t
            Description :

            - Digital Read Out
            - Chip Conveyor
            - Hydr. Copy Attachment


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Facing Lathe WMW-NILES DP1


          • Valk Machines BV
          • Kadijk 6
          • 8531XD Lemmer
          • Niederlande

          • +31 514562904
          • sales@valkmachines.com
            www.valkmachines.com
          #2079-011 · Facing Lathe

          WMW-NILES - DP1 - - 1986 -

          Technical details
          faceplate diameter 1250 mm︱turning diameter over slide rest 2500 mm︱turning length 4000 mm︱total power requirement 45 kW︱weight of the machine ca. 18 t︱required space 8 x 4 x 2,1 m︱
          Facing lathe WMW Niles with tailstock Centre height 1.250 mm Swing 2.500 mm over bed Centre distance 4.000 mm Travel of carriage 750 mm Longitudinal 630 mm crosslide 4-Jaw Chuck ø 1.250 mm Spindle speed 5,6 - 280 Rpm Spindle bore 100 mm Weight of workpiece 10.000 kg Featured with - Floorplates 4.500 x 2.200 mm - Powered tailstock - Documentation Country of origin Germany Motor power 45 kW Machine weight 18.000 kg Machine LxWxH 8.000 x 4.000 x 2.100 mm
            faceplate diameter 1250 mm
            turning diameter over slide rest 2500 mm
            turning length 4000 mm
            total power requirement 45 kW
            weight of the machine ca. 18 t
            required space 8 x 4 x 2,1 m
            Description :
            Facing lathe WMW Niles with tailstock
            Centre height 1.250 mm
            Swing 2.500 mm over bed
            Centre distance 4.000 mm
            Travel of carriage 750 mm
            Longitudinal 630 mm crosslide
            4-Jaw Chuck ø 1.250 mm
            Spindle speed 5,6 - 280 Rpm
            Spindle bore 100 mm
            Weight of workpiece 10.000 kg
            Featured with
            - Floorplates 4.500 x 2.200 mm
            - Powered tailstock
            - Documentation
            Country of origin Germany
            Motor power 45 kW
            Machine weight 18.000 kg
            Machine LxWxH 8.000 x 4.000 x 2.100 mm


        • Valk Machines BV
        • Kadijk 6
        • 8531XD Lemmer
        • Niederlande

        • Datasheet
          Request / Contact
          used Lathes Facing Lathe ZERBST DP05/W08


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1376 · Facing Lathe

          ZERBST - DP05/W08 - - 1985 - 2010 - Siemens Sinumerik 840D-sl

          Technical details
          faceplate diameter 4.000 mm︱travel -x axis 4.500 mm︱travel -z axis 600 mm︱control Siemens Sinumerik 840D-sl ︱feed range 0 - 8.000 mm/min︱turning speeds 1) 0,7 - 5,6 U/min︱turning speeds 2) 2,8 - 22,4 U/min︱turning speeds 2,1 - 56 U/min︱tool taper Sauter
          Facing Lathe | ZERBST - DP05/W08 Scope of delivery: - Chip conveyor - Hydraulic unit The ZERBST - DP05/W08 has been retrofitted in 2010. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DP05W08 | DP05 W08 | DP05-W08
            faceplate diameter 4.000 mm
            travel -x axis 4.500 mm
            travel -z axis 600 mm
            control Siemens Sinumerik 840D-sl
            feed range 0 - 8.000 mm/min
            turning speeds 1) 0,7 - 5,6 U/min
            turning speeds 2) 2,8 - 22,4 U/min
            turning speeds 2,1 - 56 U/min
            tool taper Sauter
            Description :
            Facing Lathe | ZERBST - DP05/W08

            Scope of delivery:

            - Chip conveyor
            - Hydraulic unit

            The ZERBST - DP05/W08 has been retrofitted in 2010.

            The machine is in a well-maintained condition.

            Please refer to further technical details in the attachement of the offer.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: DP05W08 | DP05 W08 | DP05-W08


        • STEINHAND GmbH
        • Am Stahlwerk 15
        • 45527 Hattingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Facing Lathe RAVENSBURG K 900 KH


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-18011 · Facing Lathe

          RAVENSBURG - K 900 KH - - 1966 -

          Technical details
          faceplate diameter 0 mm︱turning diameter over slide rest 900 mm︱turning length 1.000 mm︱total power requirement 25 kW︱weight of the machine ca. 8 t︱dimensions of the machine ca. m︱
          Height of centres 550 mm Max. turning Æ 1200 mm Max. turning Æ over slides, approx. 900 mm Max. turning length, approx. 1000 mm Spindle bore, approx. 90 mm 24 spindle speeds 4.3 - 587 rpm Feeds, infinitely variable 1 - 170 mm/min Total load, approx. 25 kW - 380 V - 50 Hz Weight, approx. 8000 kg Accessories/specialities Two separate slides, each equipped with 2-coordinate copying equipment, program controlled by plugboard, strengthened bearings and spindle, hardened and ground guideways, FORKHARDT 3-jaw chuck/ face plate, separate switch cabinet and cooling equipment. This machine is suitable for complicated, high precision copying of heavy workpieces.
            turning diameter over slide rest 900 mm
            turning length 1.000 mm
            total power requirement 25 kW
            weight of the machine ca. 8 t
            Description :
            Height of centres 550 mm
            Max. turning Æ 1200 mm
            Max. turning Æ over slides, approx. 900 mm
            Max. turning length, approx. 1000 mm
            Spindle bore, approx. 90 mm
            24 spindle speeds 4.3 - 587 rpm
            Feeds, infinitely variable 1 - 170 mm/min
            Total load, approx. 25 kW - 380 V - 50 Hz
            Weight, approx. 8000 kg

            Accessories/specialities
            Two separate slides, each equipped with 2-coordinate copying
            equipment, program controlled by plugboard, strengthened bearings
            and spindle, hardened and ground guideways, FORKHARDT 3-jaw chuck/
            face plate, separate switch cabinet and cooling equipment.
            This machine is suitable for complicated, high precision copying
            of heavy workpieces.


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Facing Lathe WMW  ZERBST DP 4000


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03798 · Facing Lathe

          WMW ZERBST - DP 4000 - - 1961 -

          Technical details
          faceplate diameter 3500 mm︱turning diameter 4000 mm︱centre distance 16000 mm︱turning speeds 0,71-33,5 U/min︱Rest 2 ︱tailstock quill taper MT ︱max. workpiece weight -without tailstock 6300 kg︱max. workpiece weight between centres 18000 kg︱Plate area mm︱total power requirement 31 kW︱weight of the machine ca. 50 t︱dimensions of the machine ca. m︱
            faceplate diameter 3500 mm
            turning diameter 4000 mm
            centre distance 16000 mm
            turning speeds 0,71-33,5 U/min
            Rest 2
            max. workpiece weight -without t. 6300 kg
            max. workpiece weight between ce. 18000 kg
            total power requirement 31 kW
            weight of the machine ca. 50 t


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Facing Lathe HEYLIGENSTAEDT 6P


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-S1897 · Facing Lathe

          HEYLIGENSTAEDT - 6P - - 1953 -

          Technical details
          turning length / mm︱turning diameter over plate // mm︱faceplate diameter / mm︱
          Faceplate diameter: 3500mm Center height over plate: 1320mm Turning diameter over plate: 2600mm Turning diameter in the pit: 3600mm Turning diameter over bed: 1300mm Turning length: about 2400mm Max. workpiece weight: 22000kg Max. torque on the faceplate: 5000 mkg Faceplate ring gear pitch circle diameter: 1900mm Main spindle bore: 120mm range of speeds normal: 0.71-35.5 rpm increased: 1-50 rpm increased: 1.4-71 rpm Drive power: 38kW
            turning length / mm
            turning diameter over plate // mm
            faceplate diameter / mm
            Description :
            Faceplate diameter: 3500mm
            Center height over plate: 1320mm
            Turning diameter over plate: 2600mm
            Turning diameter in the pit: 3600mm
            Turning diameter over bed: 1300mm
            Turning length: about 2400mm
            Max. workpiece weight: 22000kg
            Max. torque on the faceplate: 5000 mkg
            Faceplate ring gear pitch circle diameter: 1900mm
            Main spindle bore: 120mm
            range of speeds
            normal: 0.71-35.5 rpm
            increased: 1-50 rpm
            increased: 1.4-71 rpm
            Drive power: 38kW


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Facing Lathe LIEBER 823681


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03153 · Facing Lathe

          LIEBER - 823681 - - -

          Technical details
          faceplate diameter 3200 mm︱slide adjustment 800 mm︱turning speeds 1,5-78 U/min︱stepless reg. with elect. turning speeds ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            faceplate diameter 3200 mm
            slide adjustment 800 mm
            turning speeds 1,5-78 U/min


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Facing Lathe NILES DP630/3at


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-02845 · Facing Lathe

          NILES - DP630/3at - - -

          Technical details
          3-jaw-chuck diameter 630 mm︱turning diameter over slide rest 650 mm︱turning length 500 mm︱turning dia. in gap 1420 mm︱digital readout Mitutoyo ︱turning speeds 3,55-710 U/min︱total power requirement 24 kW︱weight of the machine ca. 9 t︱dimensions of the machine ca. m︱
            3-jaw-chuck diameter 630 mm
            turning diameter over slide rest 650 mm
            turning length 500 mm
            turning dia. in gap 1420 mm
            digital readout Mitutoyo
            turning speeds 3,55-710 U/min
            total power requirement 24 kW
            weight of the machine ca. 9 t


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Facing Lathe RAVENSBURG


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03540 · Facing Lathe

          RAVENSBURG - - - -

          Technical details
          faceplate diameter 1300 mm︱turning diameter over slide rest 850 mm︱centre distance 1800 mm︱turning diameter 2150 mm︱turning speeds 3,15-160 U/min︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            faceplate diameter 1300 mm
            turning diameter over slide rest 850 mm
            centre distance 1800 mm
            turning diameter 2150 mm
            turning speeds 3,15-160 U/min


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Facing Lathe MEUSER 1500/1400


          • AS Maschinenhandel
          • Welserstr. 10e
          • 51149 Köln
          • Deutschland

          • +49 (0)22031864856
            +49 (0)22031864857
          • mail@asmaschinenhandel.de
            www.asmaschinenhandel.de
          #2044-100111 · Facing Lathe

          MEUSER - 1500/1400 - - -

          Technical details
          faceplate diameter 1400 mm︱turning diameter over slide rest 1400 mm︱centre distance 1500 mm︱turning length mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            faceplate diameter 1400 mm
            turning diameter over slide rest 1400 mm
            centre distance 1500 mm


        • AS Maschinenhandel
        • Welserstr. 10e
        • 51149 Köln
        • Deutschland

        • Datasheet
          Request / Contact

          Vertical Turret Lathe - Double Column

          used Lathes Vertical Turret Lathe - Double Column Doerries SD 250


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03815 · Vertical Turret Lathe - Double Column

          Doerries - SD 250 - - Überholt 2005 -

          Technical details
          faceplate diameter 2500 mm︱swing diameter 2900 mm︱turning height 1650 mm︱slides vertical travel 850 mm︱side head - cross travel 900 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. mm︱
            faceplate diameter 2500 mm
            swing diameter 2900 mm
            turning height 1650 mm
            slides vertical travel 850 mm
            side head - cross travel 900 mm


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turret Lathe - Double Column SEDIN 1532 T


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03732 · Vertical Turret Lathe - Double Column

          SEDIN - 1532 T - - Überholt -

          Technical details
          faceplate diameter 3200 mm︱swing diameter 3200 mm︱turning height 2000 mm︱slides vertical travel 1250 mm︱workpiece weight 50000 kg︱cross travel of ram-slide 1900 mm︱swival range +/- -15/+40 Grad︱faceplate speeds from - to 0,66-62,1 U/min︱total power requirement 70 kW︱weight of the machine ca. 90 t︱dimensions of the machine ca. mm︱
            faceplate diameter 3200 mm
            swing diameter 3200 mm
            turning height 2000 mm
            slides vertical travel 1250 mm
            workpiece weight 50000 kg
            cross travel of ram-slide 1900 mm
            swival range +/- -15/+40 Grad
            faceplate speeds from - to 0,66-62,1 U/min
            total power requirement 70 kW
            weight of the machine ca. 90 t


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turret Lathe - Double Column KOHCHIYAMA TECH SH-55


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-20170 · Vertical Turret Lathe - Double Column

          KOHCHIYAMA TECH - SH-55 - - 2014 - FANUC 31i MODEL B

          Technical details
          faceplate diameter 3740 mm︱swing diameter 5500 / 6200 mm︱turning height 1550 / 1200 mm︱Control FANUC 31i MODEL B ︱Max ram stroke 1250 mm︱cross rail - adjustment 3000 mm︱turning speeds 3-15 U/min︱spindle turning speed - stepless 15 - 1500 U/min︱workpiece weight 39,4 t︱max. dia. of teeth cutting 5500 mm︱tooth width 550 mm︱module 32 ︱cutter speeds 10 -150 U/min︱milling cutter dia. x width 450 x 110 mm︱milling head axial adjustable 2060 mm︱total power requirement - kW︱weight of the machine ca. - t︱dimensions of the machine ca. - m︱
          Complex TurnMill & Gear Cutting Machine - CNC control FANUC 31i B - Turning and Milling Function - ATC - Angular Milling Head - Gear Hobbing (internal and external) - Chip Conveyor
            faceplate diameter 3740 mm
            swing diameter 5500 / 6200 mm
            turning height 1550 / 1200 mm
            Control FANUC 31i MODEL B
            Max ram stroke 1250 mm
            cross rail - adjustment 3000 mm
            turning speeds 3-15 U/min
            spindle turning speed - stepless 15 - 1500 U/min
            workpiece weight 39,4 t
            max. dia. of teeth cutting 5500 mm
            tooth width 550 mm
            module 32
            cutter speeds 10 -150 U/min
            milling cutter dia. x width 450 x 110 mm
            milling head axial adjustable 2060 mm
            total power requirement - kW
            weight of the machine ca. - t
            dimensions of the machine ca. - m
            Description :
            Complex TurnMill & Gear Cutting Machine

            - CNC control FANUC 31i B
            - Turning and Milling Function
            - ATC
            - Angular Milling Head
            - Gear Hobbing (internal and external)
            - Chip Conveyor


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turret Lathe - Double Column RAFAMET KCF 320/400N


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19837 · Vertical Turret Lathe - Double Column

          RAFAMET - KCF 320/400N - - 2011 - Siemens 840D SL

          Technical details
          faceplate diameter 3200 mm︱swing diameter 4000 mm︱turning height 3000 mm︱ram stroke each side 2100 mm︱side head - cross travel 1000 mm︱turning height over face plate with sidehead 1500 mm︱turning speeds 110 U/min︱main drive motor 121 kW︱Control Siemens 840D SL ︱workpiece weight max. 50 t︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          equipped with: - CNC Control SIEMENS SINUMERIK 840D SolutionLine - C-axis (angular positioning of the table) - S1-axis (table positioning measurement) - Table large-size rolling bearing - Table jaws 4 pcs with ratchet wrench - Cross rail sliding and clamping mechanism - Telescopic covers of the cross rail and columns guideways - HEIDENHAIN linear measuring systems of the ram and ram travel - HYDAC hydraulic unit - Right vertical turning-drilling-milling ram with toolholder for shank cutters - Automatic heads changers: -- right for 5 heads -- left for 3 heads 3 heads: - 1× 90° 2000 rpm - 1× ±120° 1800 rpm - 1× special 2000 it/m with internal cooling
            faceplate diameter 3200 mm
            swing diameter 4000 mm
            turning height 3000 mm
            ram stroke each side 2100 mm
            side head - cross travel 1000 mm
            turning height over face plate w. 1500 mm
            turning speeds 110 U/min
            main drive motor 121 kW
            Control Siemens 840D SL
            workpiece weight max. 50 t
            Description :
            equipped with:
            - CNC Control SIEMENS SINUMERIK 840D SolutionLine
            - C-axis (angular positioning of the table)
            - S1-axis (table positioning measurement)
            - Table large-size rolling bearing
            - Table jaws 4 pcs with ratchet wrench
            - Cross rail sliding and clamping mechanism
            - Telescopic covers of the cross rail and columns guideways
            - HEIDENHAIN linear measuring systems of the ram and ram travel
            - HYDAC hydraulic unit
            - Right vertical turning-drilling-milling ram with toolholder for shank cutters
            - Automatic heads changers:
            -- right for 5 heads
            -- left for 3 heads
            3 heads:
            - 1× 90° 2000 rpm
            - 1× ±120° 1800 rpm
            - 1× special 2000 it/m with internal cooling


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turret Lathe - Double Column HNK MACHINE TOOL CO VTC 50 / 60


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-20175 · Vertical Turret Lathe - Double Column

          HNK MACHINE TOOL CO - VTC 50 / 60 - - 2010 - Fanuc 31 LTB

          Technical details
          faceplate diameter 5000 mm︱swing diameter 6000 mm︱turning height 3000 mm︱faceplate speeds from - to 50 UpM︱max. workpiece weight 60 t︱feed range mm/U︱main drive motor 155 kW︱Control Fanuc 31 LTB ︱cross rail adjustment - vertical 250 (x7) mm︱cross rail adjustment - horizontal -200 / +3300 mm︱milling spindle ︱milling head speed 2000 U/min︱milling spindle - taper ISO 50 ︱ram head dimension 400 x 400 mm︱ram adjustment 2200 mm︱milling spindle drive 22/26,5 kW︱total power requirement ca 200 kW︱weight of the machine ca. 210 t︱dimensions of the machine ca. 13,7 x 9,3 x 12,5 m︱
          CNC vertical lathe with milling device - CNC control Fanuc 31LTB - Face plate - C-axis 0.001° - 1 ram - Protective housing - Coolant system - 16-position tool changer (8M / 8T)
            faceplate diameter 5000 mm
            swing diameter 6000 mm
            turning height 3000 mm
            faceplate speeds from - to 50 UpM
            max. workpiece weight 60 t
            main drive motor 155 kW
            Control Fanuc 31 LTB
            cross rail adjustment - vertical 250 (x7) mm
            cross rail adjustment - horizont. -200 / +3300 mm
            milling head speed 2000 U/min
            milling spindle - taper ISO 50
            ram head dimension 400 x 400 mm
            ram adjustment 2200 mm
            milling spindle drive 22/26,5 kW
            total power requirement ca 200 kW
            weight of the machine ca. 210 t
            dimensions of the machine ca. 13,7 x 9,3 x 12,5 m
            Description :
            CNC vertical lathe with milling device
            - CNC control Fanuc 31LTB
            - Face plate
            - C-axis 0.001°
            - 1 ram
            - Protective housing
            - Coolant system
            - 16-position tool changer (8M / 8T)



        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turret Lathe - Double Column DÖRRIES SCHARMANN Contumat VC 5000/450 MC


          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland

          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03227 · Vertical Turret Lathe - Double Column

          DÖRRIES SCHARMANN - Contumat VC 5000/450 MC - - 2009 - Siemens 840 D

          Technical details
          faceplate diameter 4500 mm︱swing diameter 5000 mm︱turning height 2645 mm︱control Siemens 840 D ︱cross rail adjustment - vertical 1500 mm︱max. ram stroke 2000 mm︱ram head dimension 300 x 300 mm︱faceplate turning speed range 0,4 - 95 U/min︱main drive 2 x 80 kW︱faceplate load max. 80.000 kg︱
          Equipment / Accessories: - C-axis driven tools HSK 100, 37 kW, 3000 rpm - hydrostatic guides of the linear axes - UWFK milling head 500 Nm +/- 90°, tool and workpiece measurement - tool and process monitoring ARTIS CTM system - workspace visualisation via video camera on the support - tool magazine (arranged on the floor) for turning and milling tools as well as storage for milling heads - work area protection completely closed with automatic covering of the chip chutes - coolant system with filter system, chip conveyor - various tool holders - documentation
            faceplate diameter 4500 mm
            swing diameter 5000 mm
            turning height 2645 mm
            control Siemens 840 D
            cross rail adjustment - vertical 1500 mm
            max. ram stroke 2000 mm
            ram head dimension 300 x 300 mm
            faceplate turning speed range 0,4 - 95 U/min
            main drive 2 x 80 kW
            faceplate load max. 80.000 kg
            Description :
            Equipment / Accessories:
            - C-axis driven tools HSK 100, 37 kW, 3000 rpm
            - hydrostatic guides of the linear axes
            - UWFK milling head 500 Nm +/- 90°, tool and workpiece measurement
            - tool and process monitoring ARTIS CTM system
            - workspace visualisation via video camera on the support
            - tool magazine (arranged on the floor) for turning and milling tools
            as well as storage for milling heads
            - work area protection completely closed with automatic covering of the
            chip chutes
            - coolant system with filter system, chip conveyor
            - various tool holders
            - documentation


        • Leyendecker & Hollmann GmbH
        • Giesenheide 18
        • 40724 Hilden
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turret Lathe - Double Column REM SC33-CNC-1S-MS-3H


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03619 · Vertical Turret Lathe - Double Column

          REM - SC33-CNC-1S-MS-3H - - 2009 - Fanuc

          Technical details
          faceplate diameter 3000 mm︱swing diameter 3500 mm︱turning height 3200 mm︱Control Fanuc ︱type Series 320i Model A︱slide adjustment 1750 mm︱ram head dimension 300x300 mm︱x-axis 2700 mm︱Table load 30000 kg︱main drive motor 100 kW︱Tool changer 16 ︱chip conveyor ︱total power requirement kW︱weight of the machine ca. 89 t︱dimensions of the machine ca. 8,5x6x8 m︱
            faceplate diameter 3000 mm
            swing diameter 3500 mm
            turning height 3200 mm
            Control Fanuc
            type Series 320i Model A
            slide adjustment 1750 mm
            ram head dimension 300x300 mm
            x-axis 2700 mm
            Table load 30000 kg
            main drive motor 100 kW
            Tool changer 16
            weight of the machine ca. 89 t
            dimensions of the machine ca. 8,5x6x8 m


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turret Lathe - Double Column HNK MACHINE TOOL CO VTC 25 / 35


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-20174 · Vertical Turret Lathe - Double Column

          HNK MACHINE TOOL CO - VTC 25 / 35 - - 2009 - Fanuc 18i-TB

          Technical details
          faceplate diameter 2500 mm︱swing diameter 3500 mm︱turning height 2000 mm︱faceplate speeds from - to 130 UpM︱max. workpiece weight 20 t︱feed range mm/U︱main drive motor 45/55 kW︱Control Fanuc 18i-TB ︱cross rail adjustment - vertical 250 (x4) mm︱cross rail adjustment - horizontal -200 / +1700 mm︱milling spindle ︱milling head speed 2000 U/min︱milling spindle - taper ISO 50 ︱ram head dimension 240 x 240 mm︱ram adjustment 1200 mm︱milling spindle drive 15/18,5 kW︱total power requirement ca 90 kW︱weight of the machine ca. ca 60 t︱dimensions of the machine ca. 8,6 x 6,7 x 7,4 m︱
          CNC vertical lathe with milling device - CNC control Fanuc 18i-TB - Face plate - C-axis 0.001° - 1 ram - Protective housing - Coolant system - 16-position tool changer (8M / 8T) 3 machines available
            faceplate diameter 2500 mm
            swing diameter 3500 mm
            turning height 2000 mm
            faceplate speeds from - to 130 UpM
            max. workpiece weight 20 t
            main drive motor 45/55 kW
            Control Fanuc 18i-TB
            cross rail adjustment - vertical 250 (x4) mm
            cross rail adjustment - horizont. -200 / +1700 mm
            milling head speed 2000 U/min
            milling spindle - taper ISO 50
            ram head dimension 240 x 240 mm
            ram adjustment 1200 mm
            milling spindle drive 15/18,5 kW
            total power requirement ca 90 kW
            weight of the machine ca. ca 60 t
            dimensions of the machine ca. 8,6 x 6,7 x 7,4 m
            Description :
            CNC vertical lathe with milling device
            - CNC control Fanuc 18i-TB
            - Face plate
            - C-axis 0.001°
            - 1 ram
            - Protective housing
            - Coolant system
            - 16-position tool changer (8M / 8T)

            3 machines available


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turret Lathe - Double Column RAFAMET KCF 320 / 350


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-AS2025 · Vertical Turret Lathe - Double Column

          RAFAMET - KCF 320 / 350 - - 2000 - Typ 840 D sl

          Technical details
          faceplate diameter 3200 mm︱swing diameter 3500 mm︱turning height 2200 mm︱range L-W-H 7730 x 6240 x 6700 mm︱control Typ 840 D sl ︱voltage 3 x 400 V︱frequency 50 Hz︱turning speeds 0,8 - 40 U/min︱max. turning diameter 3500 mm︱total power requirement 51 kW︱weight of the machine ca. 86 t︱
          Technical specifications Machine type: CNC vertical lathe Manufacturer: Rafamet Year of manufacture: 1973 conventional General overhaul with control retrofit 2010 Control upgrade 2016 Control: Siemens 840 D Sl Condition: very good faceplate Turning diameter of the faceplate 3,200 mm Number of rotation stages of the face plate 3 (infinitely variable) Speed ??ranges of the faceplate 0.8 - 40 rpm Level I 0.8 – 3 rpm Level II 0.8 - 11 rpm Level III 0.8 – 40 rpm processing of workpieces Max. turning diameter 3,500 mm Max. turning height of the workpieces above the faceplate 2,200 mm vertical supports Smallest axis distance between the vertical supports 470 mm Largest ram travel of the left vertical support 985 mm Largest ram travel of the right vertical support 985 mm Axis Feeds - Infinitely variable feed Max.: X1.2 3m/min max.: z1.2 2.5 m/min Plunger cannot be pivoted Support — crossbar Rapid feed of the cross beam 600 mm/min Larger distance of the cross beam to the faceplate 2,300 mm load sizes +Permissible turning force when turning workpieces with a turning diameter of 2,000 mm and a turning speed of 20 m/min. 8,000kg +Largest chip cross-section for workpieces made of steel Fz = 50 kg/mm² at a turning speed of 20 m/min for all supports 45 mm² +Largest chip cross-section for workpieces made of steel Fz = 50 kg/mm² at a rotation speed of 20 m/min for a vertical support with max. plunger length 985 mm 2.5 mm² +Largest chip cross-section for cast iron workpieces HB = 160 kg/mm² at a turning speed of 20 m/min for all supports 120 mm² +Largest chip cross-section for cast iron workpieces HB = 160 kg/mm² at a rotation speed of 20 m/min for a vertical support with max. plunger length 985 mm 22.5 mm² +Largest permitted workpiece weight at 0.8 - 3.15 rpm 17,500 kg +Largest permitted workpiece weight at 4 - 40 rpm 7,500 kg electric motors Main drive motor power and revolutions 51 kW Power of the feed motors of: - Vertical support beam (2 pieces) 16 Nm (gear 1:10) - Tappet (2 pieces) 16 Nm (gear 1:12) Power and revolutions of the drive motor of the hydraulic pumps (2 pieces) 3kW - 1,500 rpm Power and revolutions of the clamp hydraulic motor of the vertical support beam 1.5 kW - 1,500 rpm Power and rotation for crossbar adjustment 15 kW - 1500 rpm 3.5 Information on the compressed air supply and other consumables Compressed air connection: 6 bar free of oil and water 3.6 Energy Consumption Conditions Voltage: 3 x 400V Control Voltage: 24V Frequency: 50Hz Fusing: 315 A Main dimensions and weight of the machine Length 7,730mm Width 6,240mm Height: 6,700mm Weight: 85,750 kg Tool: Capto 60 recording Not powered front panel Turning diameter of the front plate 3,200 mm Clamping disc diameter 3,400 mm Number of rotation levels of the front panel 3 (continuously adjustable) Front panel speed ranges 0.8 - 40 rpm Level I 0.8 - 3 rpm Level II 0.8 - 11 rpm Level III 0.8 - 40 rpm processing of workpieces Max. turning diameter 3,500 mm Max. turning height of the workpieces above the front panel 2,200 mm Vertical supports Smallest center distance between the vertical supports 470 mm Largest glide path of the left vertical support 985 mm Maximum glide path of the right vertical support 985 mm Axis feed - stepless feed max.: X1.2 3m/min max.: z1.2 2.5 m / min Support - mirror Fast feeding of the crossbeam 600 mm/min Greater distance between the crossbar and the front panel 2,300 mm loading sizes • Permissible torque when turning workpieces with a Turning diameter of 2,000 mm and turning speed from 20 m / min. 8,000 kg • Largest chip cross-section for workpieces made of steel Fz = 50 kg / mm2 at a speed of 20 m / min for all supports 45 mm2 • Largest chip cross-section for workpieces made of steel Fz = 50 kg / mm2 at a speed of 20 m / min for a vertical support at max. piston length 985 mm 2.5 mm2 • Largest chip cross section for workpieces made of cast iron HB = 160 kg / mm2 at a speed of 20 m / min for all supports 120 mm2 • Largest chip cross section for workpieces made of cast iron HB = 160 kg / mm2 at a speed of 20 m / min for a vertical support with max. piston length 985 mm 22.5 mm2 • Largest permissible workpiece weight at 0.8 - 3.15 rpm 17,500 kg • Largest permissible workpiece weight at 4 - 40 rpm 7,500 kg electric motors Main drive motor power and revolutions 51 kW Power of the feed motors of: - Vertical support rod (2 pieces) 16 Nm (gear 1:10) - Tappet (2 pieces) 16 Nm (gear 1:12) Power and revolutions of the drive motor of hydraulic pumps (2 pieces) 3 kW - 1,500 rpm Power and revolutions of the clamp hydraulic motor of the vertical support rod 1.5 kW - 1,500 rpm Power and rotation to adjust the crossbar 15 kW - 1500 rpm Information on compressed air supply and other consumables Compressed air connection: 6 bar free of oil and water Energy consumption, conditions Voltage: 3 x 400V Control Voltage: 24V Frequency: 50Hz Protection: 315 A noise and waste emissions Noise level under load 80.4 dB (A) Sinumerik control: Type 840 D sl Main dimensions and weight of the machine Length 7,730mm Width 6,240mm Height: 6,700mm Weight: 85,750 kg Weight clamp disc: 7,500 kg
            faceplate diameter 3200 mm
            swing diameter 3500 mm
            turning height 2200 mm
            range L-W-H 7730 x 6240 x 6700 mm
            control Typ 840 D sl
            voltage 3 x 400 V
            frequency 50 Hz
            turning speeds 0,8 - 40 U/min
            max. turning diameter 3500 mm
            total power requirement 51 kW
            weight of the machine ca. 86 t
            Description :
            Technical specifications
            Machine type: CNC vertical lathe
            Manufacturer: Rafamet
            Year of manufacture: 1973 conventional
            General overhaul with control retrofit 2010
            Control upgrade 2016
            Control: Siemens 840 D Sl
            Condition: very good

            faceplate
            Turning diameter of the faceplate 3,200 mm
            Number of rotation stages of the face plate 3 (infinitely variable)
            Speed ??ranges of the faceplate 0.8 - 40 rpm
            Level I 0.8 – 3 rpm
            Level II 0.8 - 11 rpm
            Level III 0.8 – 40 rpm

            processing of workpieces
            Max. turning diameter 3,500 mm
            Max. turning height of the workpieces above the faceplate 2,200 mm

            vertical supports
            Smallest axis distance between the vertical supports 470 mm
            Largest ram travel of the left vertical support 985 mm
            Largest ram travel of the right vertical support 985 mm
            Axis Feeds - Infinitely variable feed
            Max.: X1.2 3m/min
            max.: z1.2 2.5 m/min
            Plunger cannot be pivoted

            Support — crossbar
            Rapid feed of the cross beam 600 mm/min
            Larger distance of the cross beam to the faceplate 2,300 mm

            load sizes
            +Permissible turning force when turning workpieces with a
            turning diameter of 2,000 mm and a turning speed
            of 20 m/min. 8,000kg

            +Largest chip cross-section for workpieces made of steel Fz = 50 kg/mm²
            at a turning speed of 20 m/min for all supports 45 mm²

            +Largest chip cross-section for workpieces made of steel Fz = 50 kg/mm²
            at a rotation speed of 20 m/min for a vertical support
            with max. plunger length 985 mm 2.5 mm²

            +Largest chip cross-section for cast iron workpieces HB = 160 kg/mm²
            at a turning speed of 20 m/min for all supports 120 mm²

            +Largest chip cross-section for cast iron workpieces HB = 160 kg/mm²
            at a rotation speed of 20 m/min for a vertical support
            with max. plunger length 985 mm 22.5 mm²

            +Largest permitted workpiece weight at 0.8 - 3.15 rpm 17,500 kg

            +Largest permitted workpiece weight at 4 - 40 rpm 7,500 kg


            electric motors
            Main drive motor power and revolutions 51 kW
            Power of the feed motors of:
            - Vertical support beam (2 pieces) 16 Nm (gear 1:10)
            - Tappet (2 pieces) 16 Nm (gear 1:12)
            Power and revolutions of the drive motor
            of the hydraulic pumps (2 pieces) 3kW - 1,500 rpm
            Power and revolutions of the clamp hydraulic motor
            of the vertical support beam 1.5 kW - 1,500 rpm
            Power and rotation for crossbar adjustment 15 kW - 1500 rpm

            3.5 Information on the compressed air supply and other consumables
            Compressed air connection: 6 bar free of oil and water

            3.6 Energy Consumption Conditions
            Voltage: 3 x 400V
            Control Voltage: 24V
            Frequency: 50Hz
            Fusing: 315 A
            Main dimensions and weight of the machine
            Length 7,730mm
            Width 6,240mm
            Height: 6,700mm
            Weight: 85,750 kg







            Tool:
            Capto 60 recording
            Not powered



            front panel

            Turning diameter of the front plate 3,200 mm

            Clamping disc diameter 3,400 mm

            Number of rotation levels of the front panel 3 (continuously adjustable)

            Front panel speed ranges 0.8 - 40 rpm

            Level I 0.8 - 3 rpm

            Level II 0.8 - 11 rpm

            Level III 0.8 - 40 rpm



            processing of workpieces

            Max. turning diameter 3,500 mm

            Max. turning height of the workpieces above the front panel 2,200 mm


            Vertical supports

            Smallest center distance between the vertical supports 470 mm

            Largest glide path of the left vertical support 985 mm

            Maximum glide path of the right vertical support 985 mm

            Axis feed - stepless feed

            max.: X1.2 3m/min

            max.: z1.2 2.5 m / min



            Support - mirror

            Fast feeding of the crossbeam 600 mm/min

            Greater distance between the crossbar and the front panel 2,300 mm



            loading sizes

            • Permissible torque when turning workpieces with a

            Turning diameter of 2,000 mm and turning speed

            from 20 m / min. 8,000 kg

            • Largest chip cross-section for workpieces made of steel Fz = 50 kg / mm2

            at a speed of 20 m / min for all supports 45 mm2

            • Largest chip cross-section for workpieces made of steel Fz = 50 kg / mm2

            at a speed of 20 m / min for a vertical support

            at max. piston length 985 mm 2.5 mm2

            • Largest chip cross section for workpieces made of cast iron HB = 160 kg / mm2

            at a speed of 20 m / min for all supports 120 mm2

            • Largest chip cross section for workpieces made of cast iron HB = 160 kg / mm2

            at a speed of 20 m / min for a vertical support

            with max. piston length 985 mm 22.5 mm2

            • Largest permissible workpiece weight at 0.8 - 3.15 rpm 17,500 kg

            • Largest permissible workpiece weight at 4 - 40 rpm 7,500 kg



            electric motors

            Main drive motor power and revolutions 51 kW

            Power of the feed motors of:

            - Vertical support rod (2 pieces) 16 Nm (gear 1:10)

            - Tappet (2 pieces) 16 Nm (gear 1:12)

            Power and revolutions of the drive motor

            of hydraulic pumps (2 pieces) 3 kW - 1,500 rpm

            Power and revolutions of the clamp hydraulic motor

            of the vertical support rod 1.5 kW - 1,500 rpm

            Power and rotation to adjust the crossbar 15 kW - 1500 rpm



            Information on compressed air supply and other consumables

            Compressed air connection: 6 bar free of oil and water



            Energy consumption, conditions

            Voltage: 3 x 400V

            Control Voltage: 24V

            Frequency: 50Hz

            Protection: 315 A



            noise and waste emissions

            Noise level under load 80.4 dB (A)




            Sinumerik control: Type 840 D sl

            Main dimensions and weight of the machine

            Length 7,730mm

            Width 6,240mm

            Height: 6,700mm

            Weight: 85,750 kg

            Weight clamp disc: 7,500 kg




        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turret Lathe - Double Column RAFAMET KCF 320/350


          • AS Maschinenhandel
          • Welserstr. 10e
          • 51149 Köln
          • Deutschland

          • +49 (0)22031864856
            +49 (0)22031864857
          • mail@asmaschinenhandel.de
            www.asmaschinenhandel.de
          #2044-10076 · Vertical Turret Lathe - Double Column

          RAFAMET - KCF 320/350 - - 2000 - Typ 840 D sl

          Technical details
          faceplate diameter 3200 mm︱swing diameter 3500 mm︱turning height 2200 mm︱Control Typ 840 D sl ︱total power requirement 51 kW︱weight of the machine ca. 86 t︱dimensions of the machine ca. m︱
            faceplate diameter 3200 mm
            swing diameter 3500 mm
            turning height 2200 mm
            Control Typ 840 D sl
            total power requirement 51 kW
            weight of the machine ca. 86 t


        • AS Maschinenhandel
        • Welserstr. 10e
        • 51149 Köln
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turret Lathe - Double Column DOERRIES-SCHARMANN VC 3500/300


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19225 · Vertical Turret Lathe - Double Column

          DOERRIES-SCHARMANN - VC 3500/300 - - 1995/2020 - Fanuc 18iTB

          Technical details
          faceplate diameter 3000 mm︱swing diameter 3500 mm︱turning height 3200 mm︱workpiece weight 50 t︱faceplate speeds from - to 0,6 - 110 U/min︱feed stepless 0,1 - 3000 mm/min︱Control Fanuc 18iTB ︱Drive 105 kW︱ram head dimension 250 x 250 mm︱spindle drive 22 kW︱spindle turning speed range 10 - 2000 U/min︱spindle taper BT 50 ︱x-axis -2550 / +2550 mm︱z-axis 1700 mm︱w-axis 1800 mm︱total power requirement - kVA︱weight of the machine ca. 65 t︱dimensions of the machine ca. - m︱
          2020 modernised with new CNC control equipped with: - CNC control FANUC 18iTB - coolant system (through spindle and external) - tool magazine 10-fold - Chip Conveyor - C-Axis - Live Tooling
            faceplate diameter 3000 mm
            swing diameter 3500 mm
            turning height 3200 mm
            workpiece weight 50 t
            faceplate speeds from - to 0,6 - 110 U/min
            feed stepless 0,1 - 3000 mm/min
            Control Fanuc 18iTB
            Drive 105 kW
            ram head dimension 250 x 250 mm
            spindle drive 22 kW
            spindle turning speed range 10 - 2000 U/min
            spindle taper BT 50
            x-axis -2550 / +2550 mm
            z-axis 1700 mm
            w-axis 1800 mm
            total power requirement - kVA
            weight of the machine ca. 65 t
            dimensions of the machine ca. - m
            Description :
            2020 modernised with new CNC control
            equipped with:
            - CNC control FANUC 18iTB
            - coolant system (through spindle and external)
            - tool magazine 10-fold
            - Chip Conveyor
            - C-Axis
            - Live Tooling


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          •   
          •   

          TOP Manufacturer:

          RAVENSBURG -