European network of stockholding machinery dealers

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:

          Machines available immediately

          Machinelist: Machines available immediately


          used Machines available immediately Lathe -  cycle-controlled MAS MT 32 NC
          Marcels Maschinen AG   Beringen (Schaffhausen) Anthoptstrasse 11 Schweiz

          Marcels Maschinen AG
          MAS MT 32 NC
          Lathe - cycle-controlled

          2001

          control HEIDENHAIN MANUAL PLUS M
          turning diameter over bed 320 mm
          centre height 160 mm
          MAS - MT 32 NC
          Lathe - cycle-controlled
          Request / Contact
          used Machines available immediately Drilling and Milling M/C HURTH V 11
          Emuk Maschinenhandel GmbH   Malsch Siemensstrasse 24 Deutschland

          Emuk Maschinenhandel GmbH
          HURTH V 11
          Drilling and Milling M/C

          bore capacity in steel (diameter) 50 mm
          x-travel 400 mm
          y-travel 260 mm
          HURTH - V 11
          Drilling and Milling M/C
          Request / Contact
          used Machines available immediately Radial Drilling Machine MAS U 1000
          Markus Hirsch GmbH   Dorsten Hüttenstrasse 1 Deutschland

          Markus Hirsch GmbH
          MAS U 1000
          Radial Drilling Machine

          2000

          bore capacity in steel (diameter) 100 mm
          arm length 2700 mm
          workpiece height max. 2200 mm
          MAS - U 1000
          Radial Drilling Machine
          Request / Contact
          used Machines available immediately Radial Drilling Machine MAS VO 50
          Hans Klein Werkzeugmaschinenhandel GmbH   Bühl Im Mühlgut 2-4 Deutschland

          Hans Klein Werkzeugmaschinenhandel GmbH
          MAS VO 50
          Radial Drilling Machine

          1991

          bore capacity in steel (diameter) 50 mm
          arm length 1100 mm
          workpiece height max. ca. 1000 mm
          MAS - VO 50
          Radial Drilling Machine
          Request / Contact
          used Machines available immediately Radial Drilling Machine MAS VR4A
          Jansen Machinehandel BV   Etten-leur Bredaseweg 210 Nederland

          Jansen Machinehandel BV
          MAS VR4A
          Radial Drilling Machine

          1964

          Capacity 50 mm
          Arm length 320 - 1250 mm
          Workpiece height 1200 mm
          MAS - VR4A
          Radial Drilling Machine
          Request / Contact
          used Machines available immediately Radial Drilling Machine Mas VR 4 A
          Jansen Machinehandel BV   Etten-leur Bredaseweg 210 Nederland

          Jansen Machinehandel BV
          Mas VR 4 A
          Radial Drilling Machine

          Capacity 50 mm
          Throat depth 1250 mm
          Stroke 310 mm
          Mas - VR 4 A
          Radial Drilling Machine
          Request / Contact
          used Machines available immediately Radial Drilling Machine MAS VR6A
          Jansen Machinehandel BV   Etten-leur Bredaseweg 210 Nederland

          Jansen Machinehandel BV
          MAS VR6A
          Radial Drilling Machine

          Capacity 60 mm
          Throat depth 1750 mm
          Spindle taper MK5
          MAS - VR6A
          Radial Drilling Machine
          Request / Contact
          used Machines available immediately Radial Drilling Machine MAS VR4A
          Jansen Machinehandel BV   Etten-leur Bredaseweg 210 Nederland

          Jansen Machinehandel BV
          MAS VR4A
          Radial Drilling Machine

          Capacity 50 mm
          Throat depth 1.250 mm
          Spindle taper MK5
          MAS - VR4A
          Radial Drilling Machine
          Request / Contact
          used Machines available immediately Radial Drilling Machine MAS VO50
          Jansen Machinehandel BV   Etten-leur Bredaseweg 210 Nederland

          Jansen Machinehandel BV
          MAS VO50
          Radial Drilling Machine

          Capacity 50 mm
          Throat depth 1250 mm
          Spindle taper MK5
          MAS - VO50
          Radial Drilling Machine
          Request / Contact
          used Machines available immediately Radial Drilling Machine - Universal MAS VR 5 NC
          Harry Vraets Machinery B.V.   Nijkerk Gezellenstraat 2 Niederlande

          Harry Vraets Machinery B.V.
          MAS VR 5 NC
          Radial Drilling Machine - Universal

          distance between table - horizontal spindles 1030 mm
          distance between columns 1600 mm
          table-size 1000 x 1600 mm
          MAS - VR 5 NC
          Radial Drilling Machine - Universal
          Request / Contact
          used Machines available immediately Radial Drilling Machine - Universal MAS VO 50
          Harry Vraets Machinery B.V.   Nijkerk Gezellenstraat 2 Niederlande

          Harry Vraets Machinery B.V.
          MAS VO 50
          Radial Drilling Machine - Universal

          arm length 1250 mm
          workpiece height max. 0 mm
          Speed 28 - 2500 U/min.
          MAS - VO 50
          Radial Drilling Machine - Universal
          Request / Contact
          used Machines available immediately Radial Drilling Machine - Universal MAS VO 50
          Harry Vraets Machinery B.V.   Nijkerk Gezellenstraat 2 Niederlande

          Harry Vraets Machinery B.V.
          MAS VO 50
          Radial Drilling Machine - Universal

          arm length 1250 mm
          workpiece height max. 0 mm
          Speed 28 - 2500 U/min.
          MAS - VO 50
          Radial Drilling Machine - Universal
          Request / Contact
          used Machines available immediately Key-Way Milling Machine - Horizontal HURTH LF 32 a
          Kemmerich Werkzeugmaschinen GmbH  Monheim am Rhein Im Rottfeld 1a Deutschland

          Kemmerich Werkzeugmaschinen
          HURTH LF 32 a
          Key-Way Milling Machine - Horizontal

          1985

          groove width 16 mm
          x-travel 16-200 mm
          table length 1500 mm
          HURTH - LF 32 a
          Key-Way Milling Machine - Horizontal
          Request / Contact
          used Machines available immediately Key-Way Milling Machine - Horizontal HURTH LF 32a
          MW-Machines   Hofkirchen Dorf 9 Österreich

          MW-MACHINES
          HURTH LF 32a
          Key-Way Milling Machine - Horizontal

          groove width / mm
          x-travel / mm
          table length / mm
          HURTH - LF 32a
          Key-Way Milling Machine - Horizontal
          Request / Contact
          used Machines available immediately Milling Machine - Vertical MAS MCV 750
          HOP Machines   Wilbertoord Wethouder Lindersstraat 145 Niederlande

          Hop Machines
          MAS MCV 750
          Milling Machine - Vertical

          1998

          x-travel 750 mm
          y-travel 500 mm
          z-travel 500 mm
          MAS - MCV 750
          Milling Machine - Vertical
          Request / Contact
          used Machines available immediately Spline Shaft Milling Machine HURTH LKF 33
          Emuk Maschinenhandel GmbH   Malsch Siemensstrasse 24 Deutschland

          Emuk Maschinenhandel GmbH
          HURTH LKF 33
          Spline Shaft Milling Machine

          max. workpiece diameter 300 mm
          hobbing length 1000 mm
          clamping length 2400 mm
          HURTH - LKF 33
          Spline Shaft Milling Machine
          Request / Contact
          used Machines available immediately Chamfering and Deburring Machine HURTH ZK 200/1-TE CNC
          Hans - Jürgen Geiger Maschinen-Vertrieb GmbH  Metzingen James-Watt-Str. 12 Deutschland

          HANS - JÜRGEN GEIGER
          HURTH ZK 200/1-TE CNC
          Chamfering and Deburring Machine

          1991

          max. wheel diameter 0 mm
          max. number of teeth 0
          max. module
          HURTH - ZK 200/1-TE CNC
          Chamfering and Deburring Machine
          Request / Contact
          used Machines available immediately Chamfering and Deburring Machine HURTH ZK 7
          Hans - Jürgen Geiger Maschinen-Vertrieb GmbH  Metzingen James-Watt-Str. 12 Deutschland

          HANS - JÜRGEN GEIGER
          HURTH ZK 7
          Chamfering and Deburring Machine

          1975

          max. wheel diameter 280 mm
          max. number of teeth 100
          max. module 6
          HURTH - ZK 7
          Chamfering and Deburring Machine
          Request / Contact
          used Machines available immediately Gear Chamfering Machine HURTH ZK 5
          MW-Machines   Hofkirchen Dorf 9 Österreich

          MW-MACHINES
          HURTH ZK 5
          Gear Chamfering Machine

          max. wheel diameter 300 mm
          spindle turning speed range 250 - 2800 U/min
          Pitch min/max 45/125 mm
          HURTH - ZK 5
          Gear Chamfering Machine
          Request / Contact
          used Machines available immediately Gear Hobbing and Shaping Mach. -combined HURTH WF10
          Christoph Busch GmbH   Korschenbroich Dieselstr. 22 Deutschland

          Christoph Busch GmbH
          HURTH WF10
          Gear Hobbing and Shaping Mach. -combined

          1989

          19147
          weight of the machine ca. 4 t
          working width max. 300 mm
          HURTH - WF10
          Gear Hobbing and Shaping Mach. -combined
          Request / Contact
          used Machines available immediately Gear Hobbing and Shaping Mach. -combined HURTH WF10
          Christoph Busch GmbH   Korschenbroich Dieselstr. 22 Deutschland

          Christoph Busch GmbH
          HURTH WF10
          Gear Hobbing and Shaping Mach. -combined

          1988

          weight of the machine ca. 5 t
          working width max. 300 mm
          6
          HURTH - WF10
          Gear Hobbing and Shaping Mach. -combined
          Request / Contact
          used Machines available immediately Gear Hobbing Machine - Vertical HURTH WF 450
          Emuk Maschinenhandel GmbH   Malsch Siemensstrasse 24 Deutschland

          Emuk Maschinenhandel GmbH
          HURTH WF 450
          Gear Hobbing Machine - Vertical

          1983

          max. wheel diameter 450 mm
          gear width 300 mm
          max. module 10
          HURTH - WF 450
          Gear Hobbing Machine - Vertical
          Request / Contact
          used Machines available immediately Gear Noise under Load Testing Machine HURTH ZP 300
          Zuefle GmbH   Giebelstadt Levi-Strauss-Str. 121 Deutschland

          Zuefle GmbH
          HURTH ZP 300
          Gear Noise under Load Testing Machine

          2000

          max. wheel diameter 300 mm
          centre distance 500 mm
          max. module 6 mm
          HURTH - ZP 300 6.200 €
          Gear Noise under Load Testing Machine
          Request / Contact
          used Machines available immediately Gear Noise under Load Testing Machine HURTH ZP 300
          Zuefle GmbH   Giebelstadt Levi-Strauss-Str. 121 Deutschland

          Zuefle GmbH
          HURTH ZP 300
          Gear Noise under Load Testing Machine

          2000

          max. wheel diameter 300 mm
          centre distance 500 mm
          max. module 6 mm
          HURTH - ZP 300
          Gear Noise under Load Testing Machine
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          •   
          •   

          TOP Manufacturer: