Machines available immediately

Machinelist: Machines available immediately

Machining Center - Universal

FIMOTEC
20 RUE AMPERE
67500 HAGUENAU
Frankreich

+33 (0)388720247
+33 (0)388936066
FIMOTEC@WANADOO.FR
WWW.FIMOTEC.FR

#1105-03847 · Machining Center - Universal

DECKEL MAHO DMG - DMU 50 5-Achsen - - 2013 - HEIDEN iTNC 530

Technical details

x-travel 500 mm︱y-travel 450 mm︱z-travel 400 mm︱control HEIDEN iTNC 530 ︱tool adaptor SK 40 ︱turning speeds 14000 1/min︱table surface area 650 x 500 mm︱tool change unit 16 pos.︱total power requirement 40 KVA 63 A Absich ︱

DMU 50 5 AXIS SIUMULTAN CONTROL HEIDENHAIN ITNC 530 NC round-swivelling table,2 AXIS 14000 rpm 16 positions sa 40 in magazin coolant device, cabin,+ CHIP CONVOYER

x-travel 500 mm

y-travel 450 mm

z-travel 400 mm

control HEIDEN iTNC 530

tool adaptor SK 40

turning speeds 14000 1/min

table surface area 650 x 500 mm

tool change unit 16 pos.

total power requirement 40 KVA 63 A Absich

Description :

DMU 50 5 AXIS SIUMULTAN
CONTROL HEIDENHAIN ITNC 530
NC round-swivelling table,2 AXIS
14000 rpm
16 positions sa 40 in magazin
coolant device,
cabin,+ CHIP CONVOYER

Datasheet

used Machines available immediately Machining Center - Universal DECKEL MAHO DMG DMU 50 ECOLINE 5-Achsen 3+2

FIMOTEC
20 RUE AMPERE
67500 HAGUENAU
Frankreich

+33 (0)388720247
+33 (0)388936066
FIMOTEC@WANADOO.FR
WWW.FIMOTEC.FR

#1105-03930 · Machining Center - Universal

DECKEL MAHO DMG - DMU 50 ECOLINE 5-Achsen 3+2 - - 2012 - HEIDENHAIN TNC 620

Technical details

x-travel 500 mm︱y-travel 420 mm︱z-travel 380 mm︱control HEIDENHAIN TNC 620 ︱tool adaptor SK 40 ︱turning speeds 8000 1/min︱table surface area 500 X 380 MM mm︱tool change unit 20 pos.︱total power requirement 40 KVA 63 A Absich ︱

CONTROL HEIDENHAIN ITNC 620 NC round-swivelling table, coolant device, cabin,

x-travel 500 mm

y-travel 420 mm

z-travel 380 mm

control HEIDENHAIN TNC 620

tool adaptor SK 40

turning speeds 8000 1/min

table surface area 500 X 380 MM mm

tool change unit 20 pos.

total power requirement 40 KVA 63 A Absich

Description :

CONTROL HEIDENHAIN ITNC 620
NC round-swivelling table,
coolant device,
cabin,

Datasheet

used Machines available immediately Machining Center - Universal DECKEL MAHO DMG DMU 50

FIMOTEC
20 RUE AMPERE
67500 HAGUENAU
Frankreich

+33 (0)388720247
+33 (0)388936066
FIMOTEC@WANADOO.FR
WWW.FIMOTEC.FR

#1105-03891 · Machining Center - Universal

DECKEL MAHO DMG - DMU 50 - - 2010 - MILL PLUS IT U 600

Technical details

x-travel 500 mm︱y-travel 450 mm︱z-travel 400 mm︱turning speeds 10000 1/min︱tool taper SK 40 ︱control MILL PLUS IT U 600 ︱tool change unit 30 ︱rapid traverse 24 m/min︱spindle 35/ 25 kW︱total power requirement 70 kVA︱weight of the machine ca. 5.5 t︱

5-axis SIMULTAN machining center 2-axis NC-round-swivelling TABLE coolant supply el. handwheel, chipconveyor approx.20.000 hours "machine on", approx. 2.000 hours "spindle running" NEW SPINDEL IN 20200 VERY NICE CNC HEIDENHAIN MILL PLUS

x-travel 500 mm

y-travel 450 mm

z-travel 400 mm

turning speeds 10000 1/min

tool taper SK 40

control MILL PLUS IT U 600

tool change unit 30

rapid traverse 24 m/min

spindle 35/ 25 kW

total power requirement 70 kVA

weight of the machine ca. 5.5 t

Description :

5-axis SIMULTAN machining center

2-axis NC-round-swivelling TABLE
coolant supply
el. handwheel,
chipconveyor
approx.20.000 hours "machine on", approx. 2.000 hours "spindle running" NEW
SPINDEL IN 20200
VERY NICE
CNC HEIDENHAIN MILL PLUS

Datasheet

used Machines available immediately Machining Center - Universal DECKEL MAHO DMG DMU 50 EVO linear 5-Achsen

FIMOTEC
20 RUE AMPERE
67500 HAGUENAU
Frankreich

+33 (0)388720247
+33 (0)388936066
FIMOTEC@WANADOO.FR
WWW.FIMOTEC.FR

#1105-03960 · Machining Center - Universal

DECKEL MAHO DMG - DMU 50 EVO linear 5-Achsen - - 2008 - HEIDENHAIN 530

Technical details

x-travel 500 mm︱y-travel 420 mm︱z-travel 380 mm︱control HEIDENHAIN 530 ︱tool adaptor SK 40 ︱

NC round-swivelling table, coolant device,HP 40 BAR TROUGHT THE SPINDEL cabin, magasin 60 parts sa 40, chip convoyer HEIDENHAIN TNC 530 TOOLEYES WITH ROBOTER SYSTEME EROWA COMPACT 10

x-travel 500 mm

y-travel 420 mm

z-travel 380 mm

control HEIDENHAIN 530

tool adaptor SK 40

Description :

NC round-swivelling table,
coolant device,HP 40 BAR TROUGHT THE SPINDEL
cabin,
magasin 60 parts sa 40,
chip convoyer
HEIDENHAIN TNC 530
TOOLEYES
WITH ROBOTER SYSTEME EROWA COMPACT 10

Datasheet

FIMOTEC
20 RUE AMPERE
67500 HAGUENAU
Frankreich

+33 (0)388720247
+33 (0)388936066
FIMOTEC@WANADOO.FR
WWW.FIMOTEC.FR

#1105-02961 · Machining Center - Universal

DECKEL MAHO DMG - DMU 50 EVO linear 5-Achsen - - 2005 - HEIDENHAIN 530

Technical details

x-travel 500 mm︱y-travel 420 mm︱z-travel 380 mm︱control HEIDENHAIN 530 ︱tool adaptor SK 40 ︱

NC round-swivelling table, coolant device,HP 40 BAR TROUGHT THE SPINDEL cabin, magasin 30 parts sa 40, chip convoyer HEIDENHAIN I TNC 53 TOOLEYES

x-travel 500 mm

y-travel 420 mm

z-travel 380 mm

control HEIDENHAIN 530

tool adaptor SK 40

Description :

NC round-swivelling table,
coolant device,HP 40 BAR TROUGHT THE SPINDEL
cabin,
magasin 30 parts sa 40,
chip convoyer
HEIDENHAIN I TNC 53
TOOLEYES

Datasheet

used Machines available immediately Machining Center - Universal DECKEL MAHO DMG DMU 50 5-Achsen 3+2

FIMOTEC
20 RUE AMPERE
67500 HAGUENAU
Frankreich

+33 (0)388720247
+33 (0)388936066
FIMOTEC@WANADOO.FR
WWW.FIMOTEC.FR

#1105-03678 · Machining Center - Universal

DECKEL MAHO DMG - DMU 50 5-Achsen 3+2 - - 2005 - HEIDENHAIN ITNC 530 530

Technical details

x-travel 500 mm︱y-travel 420 mm︱z-travel 380 mm︱control HEIDENHAIN ITNC 530 530 ︱tool adaptor SK 40 ︱turning speeds 10000 1/min︱table surface area 500 X 380 MM mm︱

CONTROL HEIDENHAIN ITNC 530 NC round-swivelling table, coolant device, cabin,

x-travel 500 mm

y-travel 420 mm

z-travel 380 mm

control HEIDENHAIN ITNC 530 530

tool adaptor SK 40

turning speeds 10000 1/min

table surface area 500 X 380 MM mm

Description :

CONTROL HEIDENHAIN ITNC 530
NC round-swivelling table,
coolant device,
cabin,

Datasheet

used Machines available immediately Machining Center - Universal DECKEL MAHO DMG DMU 35

FIMOTEC
20 RUE AMPERE
67500 HAGUENAU
Frankreich

+33 (0)388720247
+33 (0)388936066
FIMOTEC@WANADOO.FR
WWW.FIMOTEC.FR

#1105-03444 · Machining Center - Universal

DECKEL MAHO DMG - DMU 35 - - 2000 - HEIDENHAIN TNC 310

Technical details

x-travel 350 mm︱y-travel 240 mm︱z-travel 340 mm︱number of spindle speeds 6300 1 / min︱control HEIDENHAIN TNC 310 ︱table-size 400 x 280 mm︱

electron. handwheel SK 40 universal round- / swivelling table 360° / + - 90° cnc siemens 810D WITH SHOPMILL

x-travel 350 mm

y-travel 240 mm

z-travel 340 mm

number of spindle speeds 6300 1 / min

control HEIDENHAIN TNC 310

table-size 400 x 280 mm

Description :

electron. handwheel
SK 40
universal round- / swivelling table 360° / + - 90°
cnc siemens 810D WITH SHOPMILL

Datasheet

Machining Center - Vertical

FIMOTEC
20 RUE AMPERE
67500 HAGUENAU
Frankreich

+33 (0)388720247
+33 (0)388936066
FIMOTEC@WANADOO.FR
WWW.FIMOTEC.FR

#1105-03783 · Machining Center - Vertical

DECKEL MAHO DMG - DMU 70 V 3-Achsen - - 1999 - HEIDENHAIN tnc 426

Technical details

x-travel 750 mm︱y-travel 600 mm︱z-travel 520 mm︱control HEIDENHAIN tnc 426 ︱tool adaptor SK 40 ︱turning speeds 12000 1/min︱table surface area 800 x 480 mm︱tool change unit 24 pos.︱total power requirement 30 kW︱weight of the machine ca. 5 t︱dimensions of the machine ca. m︱

coolant device, cabin control heidenhain tnc 426 spindel 12000 rpm

x-travel 750 mm

y-travel 600 mm

z-travel 520 mm

control HEIDENHAIN tnc 426

tool adaptor SK 40

turning speeds 12000 1/min

table surface area 800 x 480 mm

tool change unit 24 pos.

total power requirement 30 kW

weight of the machine ca. 5 t

Description :

coolant device,
cabin
control heidenhain tnc 426
spindel 12000 rpm

Datasheet

Universal Milling Machine

FIMOTEC
20 RUE AMPERE
67500 HAGUENAU
Frankreich

+33 (0)388720247
+33 (0)388936066
FIMOTEC@WANADOO.FR
WWW.FIMOTEC.FR

#1105-03831 · Universal Milling Machine

DECKEL MAHO DMG - DMU 70 EVolution - - 2005 - HEIDENHAIN iTNC 530

Technical details

x-travel 750 mm︱y-travel 600 mm︱z-travel 520 mm︱Control HEIDENHAIN iTNC 530︱

Milling Machine - Universal DECKEL MAHO DMG DMU 70eVolution NC swiveling rotary table (700x500) spindle SA 40 18000 RPN NEW IN 2022 -------------------- Spindle speed: 18,000rpm Tool holder: SK40 tool changer -------------------- Magazine places: 32 Pick up domestic equipments -------------------- probe chip conveyor 2nd processor card electronic handwheel HR410 Blown Air M25 Flushing gun

x-travel 750 mm

y-travel 600 mm

z-travel 520 mm

Control HEIDENHAIN iTNC 530

Description :

Milling Machine - Universal DECKEL MAHO DMG DMU 70eVolution
NC swiveling rotary table (700x500)

spindle SA 40 18000 RPN NEW IN 2022
--------------------
Spindle speed: 18,000rpm
Tool holder: SK40

tool changer
--------------------
Magazine places: 32
Pick up

domestic equipments
--------------------
probe
chip conveyor
2nd processor card
electronic handwheel HR410
Blown Air M25
Flushing gun

Datasheet

FIMOTEC
20 RUE AMPERE
67500 HAGUENAU
Frankreich

+33 (0)388720247
+33 (0)388936066
FIMOTEC@WANADOO.FR
WWW.FIMOTEC.FR

#1105-03509 · Universal Milling Machine

DECKEL MAHO DMG - DMU 70 eVolution - - 2002 - HEIDENHAIN iTNC 530

Technical details

x-travel 750 mm︱y-travel 600 mm︱z-travel 520 mm︱Control HEIDENHAIN iTNC 530︱

Milling Machine - Universal DECKEL MAHO DMG DMU 70eVolution NC swiveling rotary table (700x500) spindle -------------------- Spindle speed: 18,000rpm Tool holder: SK40 tool changer -------------------- Magazine places: 32 Pick up domestic equipments -------------------- probe chip conveyor 2nd processor card electronic handwheel HR410 Blown Air M25 Flushing gun CTS

x-travel 750 mm

y-travel 600 mm

z-travel 520 mm

Control HEIDENHAIN iTNC 530

Description :

Milling Machine - Universal DECKEL MAHO DMG DMU 70eVolution
NC swiveling rotary table (700x500)

spindle
--------------------
Spindle speed: 18,000rpm
Tool holder: SK40

tool changer
--------------------
Magazine places: 32
Pick up

domestic equipments
--------------------
probe
chip conveyor
2nd processor card
electronic handwheel HR410
Blown Air M25
Flushing gun
CTS

Datasheet

Hydr. pressbrake

Bästlein
Augsburger Str. 56
89312 Günzburg
Deutschland

+49 (0) 8221 93037-0
+49 (0) 8221 93037-29
info@baestlein.com
www.baestlein.com

#1123-4021049 · Hydr. pressbrake

BAYKAL - APHS 31160 - - NEU - CYBELEC VisiTouch 19-2D

Technical details

pressure 160 t︱chamfer lenght 3100 mm︱distance between columns 2550 mm︱throat 410 mm︱table width 60 mm︱table height 870 mm︱dayligth 530 mm︱piston stroke 260 mm︱ 200 mm/sec︱return speed 160 mm/sec︱ 1000 mm︱ 160 mm︱engine output 15 kW︱quantity of oil 180 l︱Control CYBELEC VisiTouch 19-2D ︱weight of the machine ca. 10.000 kg︱dimensions of the machine ca. 4100x1800x2700 mm︱

pressure 160 t

chamfer lenght 3100 mm

distance between columns 2550 mm

throat 410 mm

table width 60 mm

table height 870 mm

dayligth 530 mm

piston stroke 260 mm

200 mm/sec

return speed 160 mm/sec

1000 mm

160 mm

engine output 15 kW

quantity of oil 180 l

Control CYBELEC VisiTouch 19-2D

weight of the machine ca. 10.000 kg

dimensions of the machine ca. 4100x1800x2700 mm

Datasheet

used Machines available immediately Hydr. pressbrake BAYKAL APHS 31.300

A + B Werkzeuge Maschinen Handels GmbH
Rottweg 17
48683 Ahaus
Deutschland

(0049)-2561-9384-71
(0049)-2561-9384-36
info@ab-maschinen.de
www.ab-maschinen.de

#1008-9308242 · Hydr. pressbrake

BAYKAL - APHS 31.300 - - 2013 -

Technical details

pressure 300 t︱chamfer lenght 3100 mm︱distance between columns 2550 mm︱column arm 500 mm︱ram stroke speed 110 mm/sec︱return speed 100 mm/sec︱work speed 8,0 mm/sec︱work stroke 420 mm︱dayligth 870 mm︱table height 905 mm︱oil volume 280 ltr.︱voltage 400 Volt︱working pressure 283 bar︱Number of working hours ~ 21.835 h︱total power requirement 23,0 kW︱weight 18.250 kg︱Dimensions (HxWxD) 4550 x 2250 x 3300 mm︱

** current new price ~ 135.000 euros -------------------------------------------------- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA 66T (touch screen) * 2D graphic touch screen programming mode * 17" high-resolution color TFT * Complete Windows application suite * Delem Modusys compatibility (module scalability and adaptivity) * USB, peripheral port * Pivoting control unit, front left - Motorized backgauge with R-axis, on ball screws - X = 800 mm R = 250 mm with 2 stop fingers - CNC controlled axes : Y1 - Y2 - X - R - Z1 + Z2 - C (crowning) + AP1 - 2x CNC electrically movable stop fingers - Electric crowning controlled by CNC - Safety device behind the machine - FIESSLER AKAS laser protection device in front of the machine - 2x front support arms "Sliding-System", with T-slot and cam - 1x free-moving double foot control - CE mark / declaration of conformity - Control cabinet, on the left side - Operation manual ** Special accessories included : - WILA hydraulic tool clamping above - WILA hydraulic tool clamping below - 1x CNC controlled bending aid (AP1) - "Parking" area for bending assistance * Machinevideo : https://www.youtube.com/watch?v=lT0APHnn9Js

pressure 300 t

chamfer lenght 3100 mm

distance between columns 2550 mm

column arm 500 mm

ram stroke speed 110 mm/sec

return speed 100 mm/sec

work speed 8,0 mm/sec

work stroke 420 mm

dayligth 870 mm

table height 905 mm

oil volume 280 ltr.

voltage 400 Volt

working pressure 283 bar

Number of working hours ~ 21.835 h

total power requirement 23,0 kW

weight 18.250 kg

Dimensions (HxWxD) 4550 x 2250 x 3300 mm

Description :

** current new price ~ 135.000 euros

--------------------------------------------------
Press brake with special equipment
* increased installation height
* increased cylinder stroke
* as well as increased bending beam speeds
--------------------------------------------------

Furnishing:
- DELEM CNC control model DA 66T (touch screen)
* 2D graphic touch screen programming mode
* 17" high-resolution color TFT
* Complete Windows application suite
* Delem Modusys compatibility (module scalability and adaptivity)
* USB, peripheral port
* Pivoting control unit, front left
- Motorized backgauge with R-axis, on ball screws
- X = 800 mm R = 250 mm with 2 stop fingers
- CNC controlled axes : Y1 - Y2 - X - R - Z1 + Z2 - C (crowning) + AP1
- 2x CNC electrically movable stop fingers
- Electric crowning controlled by CNC
- Safety device behind the machine
- FIESSLER AKAS laser protection device in front of the machine
- 2x front support arms "Sliding-System", with T-slot and cam
- 1x free-moving double foot control
- CE mark / declaration of conformity
- Control cabinet, on the left side
- Operation manual

** Special accessories included :
- WILA hydraulic tool clamping above
- WILA hydraulic tool clamping below
- 1x CNC controlled bending aid (AP1)
- "Parking" area for bending assistance

* Machinevideo :
https://www.youtube.com/watch?v=lT0APHnn9Js

Datasheet

Frech GmbH
Werderstr. 82
74889 Sinsheim
Deutschland

0049-7261-1011
0049-7261-63966
info@frech-maschinen.de
www.frech-maschinen.de

#1073-96808 · Hydr. pressbrake

BAYKAL - APHS 31.300 - - 2013 -

Technical details

pressure 300 t︱chamfer lenght 3100 mm︱distance between columns 2550 mm︱column arm 500 mm︱ram stroke speed 140 mm/sec︱return speed 150 mm/sec︱work speed 10,0 mm/sec︱work stroke 320 mm︱dayligth 590 mm︱table height 905 mm︱oil volume 400 ltr.︱voltage 400 Volt︱working pressure 283 bar︱Number of working hours ~ 21.835 h︱total power requirement 23,0 kW︱weight 18.250 kg︱Dimensions (HxWxD) 4550 x 2250 x 3050 mm︱

pressure 300 t

chamfer lenght 3100 mm

distance between columns 2550 mm

column arm 500 mm

ram stroke speed 140 mm/sec

return speed 150 mm/sec

work speed 10,0 mm/sec

work stroke 320 mm

dayligth 590 mm

table height 905 mm

oil volume 400 ltr.

voltage 400 Volt

working pressure 283 bar

Number of working hours ~ 21.835 h

total power requirement 23,0 kW

weight 18.250 kg

Dimensions (HxWxD) 4550 x 2250 x 3050 mm

Description :

** current new price ~ 135.000 euros

--------------------------------------------------
Press brake with special equipment
* increased installation height
* increased cylinder stroke
* as well as increased bending beam speeds
--------------------------------------------------

Furnishing:
- DELEM CNC control model DA 66T (touch screen)
* 2D graphic touch screen programming mode
* 17" high-resolution color TFT
* Complete Windows application suite
* Delem Modusys compatibility (module scalability and adaptivity)
* USB, peripheral port
* Pivoting control unit, front left
- Motorized backgauge with R-axis, on ball screws
- X = 800 mm R = 250 mm with 2 stop fingers
- CNC controlled axes : Y1 - Y2 - X - R - Z1 + Z2 - C (crowning) + AP1
- 2x CNC electrically movable stop fingers
- Electric crowning controlled by CNC
- Safety device behind the machine
- FIESSLER AKAS laser protection device in front of the machine
- 2x front support arms "Sliding-System", with T-slot and cam
- 1x free-moving double foot control
- CE mark / declaration of conformity
- Control cabinet, on the left side
- Operation manual

** Special accessories included :
- WILA hydraulic tool clamping above
- WILA hydraulic tool clamping below
- 1x CNC controlled bending aid (AP1)
- "Parking" area for bending assistance

Datasheet

used Machines available immediately Hydr. pressbrake BAYKAL APH-S 2606x90

A + B Werkzeuge Maschinen Handels GmbH
Rottweg 17
48683 Ahaus
Deutschland

(0049)-2561-9384-71
(0049)-2561-9384-36
info@ab-maschinen.de
www.ab-maschinen.de

#1008-9308286 · Hydr. pressbrake

BAYKAL - APH-S 2606x90 - - 2006 -

Technical details

pressure 90,0 t︱chamfer lenght 2600 mm︱distance between columns 2050 mm︱column arm 310 mm︱ajustment speed 80,0 mm/sec︱working feed 10,0 mm/sec︱return speed 80,0 mm/sec︱back stop - adjustable ca. 725 mm︱stroke 120 mm︱dayligth 475 mm︱table height 860 mm︱oil volume 130 ltr.︱total power requirement 11,0 kW︱weight of the machine ca. 5500 kg.︱

** good condition (!!) Furnishing: - electro-hydraulic CNC press brake - with DELEM CNC control model DA 66W * 2D graphical programming * automatic bending sequence calculation and collision detection * high quality color LCD screen (TFT) - swiveling operation, front left - controlled axes: Y1 + Y2 + X + R + CNC crowning - electric back gauge, on ball screws - with 2x manually adjustable stop fingers - motorized, electric CNC crowning - Upper tool holder system A (Amada), with upper wedge crowning - Lower tool holder Sysetm A (Amada) - LAZER Safe front laser protection device - 2x front, sliding support arms (“sliding” system) - side protective grilles - freely movable foot control - Operation manual **Special accessories included: - UKB tool adapter (13x pieces) - UKB tool clamping plates (13x pieces) - split ROLLERI upper tool 85° - split ROLLERI 4V reversible die 85° * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308286

pressure 90,0 t

chamfer lenght 2600 mm

distance between columns 2050 mm

column arm 310 mm

ajustment speed 80,0 mm/sec

working feed 10,0 mm/sec

return speed 80,0 mm/sec

back stop - adjustable ca. 725 mm

stroke 120 mm

dayligth 475 mm

table height 860 mm

oil volume 130 ltr.

total power requirement 11,0 kW

weight of the machine ca. 5500 kg.

Description :

** good condition (!!)

Furnishing:
- electro-hydraulic CNC press brake
- with DELEM CNC control model DA 66W
* 2D graphical programming
* automatic bending sequence calculation and collision detection
* high quality color LCD screen (TFT)
- swiveling operation, front left
- controlled axes: Y1 + Y2 + X + R + CNC crowning
- electric back gauge, on ball screws
- with 2x manually adjustable stop fingers
- motorized, electric CNC crowning
- Upper tool holder system A (Amada), with upper wedge crowning
- Lower tool holder Sysetm A (Amada)
- LAZER Safe front laser protection device
- 2x front, sliding support arms (“sliding” system)
- side protective grilles
- freely movable foot control
- Operation manual

**Special accessories included:
- UKB tool adapter (13x pieces)
- UKB tool clamping plates (13x pieces)
- split ROLLERI upper tool 85°
- split ROLLERI 4V reversible die 85°

* Machine link:
http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308286

Datasheet

Frech GmbH
Werderstr. 82
74889 Sinsheim
Deutschland

0049-7261-1011
0049-7261-63966
info@frech-maschinen.de
www.frech-maschinen.de

#1073-96908 · Hydr. pressbrake

BAYKAL - APH-S 2606x90 - - 2006 -

Technical details

pressure 090 t︱chamfer lenght 2600 mm︱distance between columns 2050 mm︱column arm 310 mm︱ajustment speed 80,0 mm/sec︱working feed 10,0 mm/sec︱return speed 80,0 mm/sec︱back stop - adjustable ca. 725 mm︱stroke 120 mm︱dayligth 475 mm︱table height 860 mm︱oil volume 130 ltr.︱total power requirement 11,0 kW︱weight of the machine ca. 5500 kg.︱

pressure 090 t

chamfer lenght 2600 mm

distance between columns 2050 mm

column arm 310 mm

ajustment speed 80,0 mm/sec

working feed 10,0 mm/sec

return speed 80,0 mm/sec

back stop - adjustable ca. 725 mm

stroke 120 mm

dayligth 475 mm

table height 860 mm

oil volume 130 ltr.

total power requirement 11,0 kW

weight of the machine ca. 5500 kg.

Description :

** good condition (!!)

Furnishing:
- electro-hydraulic CNC press brake
- with DELEM CNC control model DA 66W
* 2D graphical programming
* automatic bending sequence calculation and collision detection
* high quality color LCD screen (TFT)
- swiveling operation, front left
- controlled axes: Y1 + Y2 + X + R + CNC crowning
- electric back gauge, on ball screws
- with 2x manually adjustable stop fingers
- motorized, electric CNC crowning
- Upper tool holder system A (Amada), with upper wedge crowning
- Lower tool holder Sysetm A (Amada)
- LAZER Safe front laser protection device
- 2x front, sliding support arms (“sliding” system)
- side protective grilles
- freely movable foot control
- Operation manual

**Special accessories included:
- UKB tool adapter (13x pieces)
- UKB tool clamping plates (13x pieces)
- split ROLLERI upper tool 85°
- split ROLLERI 4V reversible die 85°

Datasheet

used Machines available immediately Hydr. pressbrake BAYKAL APH 1250 x 35

Jansen Machinehandel BV
Bredaseweg 210
4873 LA Etten-leur
Nederland

+31 (0) 76 5015750
info@jansenmachinehandel.nl
www.jansenmachinehandel.nl

#2049-KAN207 · Hydr. pressbrake

BAYKAL - APH 1250 x 35 - - 2003 - Elgo, P8822

Technical details

Capacity 35 T︱Bend length 1250 mm︱Machine dimensions 1.800 x 1.450 x 2.150 mm︱Machine weight 2.550 kg︱Control Elgo, P8822 ︱

CNC Brand ELGO Year of make 2003 Control ELGO, P8822 Hydraulic Capacity 35 T Bending length 1250 mm Flat on the ground Multi V + J-blade Electric back gauge Including bearings Includes 1 set of tools Machine size 1.800 x 1.450 x 2.150 mm Machine weight 2.550 kg

Capacity 35 T

Bend length 1250 mm

Machine dimensions 1.800 x 1.450 x 2.150 mm

Machine weight 2.550 kg

Control Elgo, P8822

Description :

CNC Brand ELGO
Year of make 2003
Control ELGO, P8822
Hydraulic
Capacity 35 T
Bending length 1250 mm
Flat on the ground
Multi V + J-blade
Electric back gauge
Including bearings
Includes 1 set of tools
Machine size 1.800 x 1.450 x 2.150 mm
Machine weight 2.550 kg

Datasheet

used Machines available immediately Hydr. pressbrake BAYKAL APH 3108/160

Gustav Schönberger GmbH
Hünderstr. 14
74080 Heilbronn
Deutschland

(0049)7131 46060
(0049)7131 460620
schoenberger@gsh-maschinen.de
www.gsh-maschinen.de

#1036-105348 · Hydr. pressbrake

BAYKAL - APH 3108/160 - - 2001 -

Technical details

pressure 160 t︱chamfer lenght 3100 mm︱distance between columns 2550 mm︱total power requirement 11 kW︱weight of the machine ca. 8,5 t︱dimensions of the machine ca. m︱

motorized arrester tools Technische Daten / technical details: Druck / pressure 160 to Abkantlänge / bending lenght 3100 mm Durchgang zwischen den Ständern / distance between columns 2550 mm Ausladung / overhang 310 mm Antriebsleistung / drive capacity 11 kW Gewicht / weight 8500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

pressure 160 t

chamfer lenght 3100 mm

distance between columns 2550 mm

total power requirement 11 kW

weight of the machine ca. 8,5 t

Description :

motorized arrester
tools

Technische Daten / technical details:
Druck / pressure 160 to
Abkantlänge / bending lenght 3100 mm
Durchgang zwischen den Ständern / distance between columns 2550 mm
Ausladung / overhang 310 mm
Antriebsleistung / drive capacity 11 kW
Gewicht / weight 8500 kg
Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -
Technical data, accessories and description of the machine are not binding.

Datasheet

used Machines available immediately Hydr. pressbrake BAYKAL APH 3708 x 180

A + B Werkzeuge Maschinen Handels GmbH
Rottweg 17
48683 Ahaus
Deutschland

(0049)-2561-9384-71
(0049)-2561-9384-36
info@ab-maschinen.de
www.ab-maschinen.de

#1008-9308364 · Hydr. pressbrake

BAYKAL - APH 3708 x 180 - - 1999 -

Technical details

pressure 180 t︱chamfer lenght 3700 mm︱distance between columns 3250 mm︱throat 270 mm︱stroke 220 mm︱ajustment speed 80,0 mm/sec︱working feed 10,0 mm/sec︱return speed 58,0 mm/sec︱dayligth 395 mm︱table width 200 mm︱work height max. 870 mm︱oil volume 210 ltr.︱total power requirement 15,0 kW︱weight of the machine ca. 12100 kg.︱range L-W-H 4200 x 1470 x 2550 mm︱

** from a maintenance workshop (!!) Furnishing: - conventional electro-hydraulic press brake * with torsion shaft for parallelism of the upper beam - electric back gauge, with ball screws (X axis) * with 2x manually adjustable stop fingers * Fine adjustment via handwheel at the front, with analogue position display - electro-motor adjustment of the immersion depth (Y1+Y2 axis) * with digital position display - swiveling operation, mounting side on the left - 1x set of upper tools / additional divided tools - 1x rotating Multi V universal matrix block - 2x front / sliding support arms - freely movable 2-hand foot control - Operation manual * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308364 * Machine video : https://www.youtube.com/watch?v=9oX5Pqdc18s

pressure 180 t

chamfer lenght 3700 mm

distance between columns 3250 mm

throat 270 mm

stroke 220 mm

ajustment speed 80,0 mm/sec

working feed 10,0 mm/sec

return speed 58,0 mm/sec

dayligth 395 mm

table width 200 mm

work height max. 870 mm

oil volume 210 ltr.

total power requirement 15,0 kW

weight of the machine ca. 12100 kg.

range L-W-H 4200 x 1470 x 2550 mm

Description :

** from a maintenance workshop (!!)

Furnishing:
- conventional electro-hydraulic press brake
* with torsion shaft for parallelism of the upper beam
- electric back gauge, with ball screws (X axis)
* with 2x manually adjustable stop fingers
* Fine adjustment via handwheel at the front, with analogue position display
- electro-motor adjustment of the immersion depth (Y1+Y2 axis)
* with digital position display
- swiveling operation, mounting side on the left
- 1x set of upper tools / additional divided tools
- 1x rotating Multi V universal matrix block
- 2x front / sliding support arms
- freely movable 2-hand foot control
- Operation manual

* Machine link:
http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308364

* Machine video :
https://www.youtube.com/watch?v=9oX5Pqdc18s

Datasheet

Frech GmbH
Werderstr. 82
74889 Sinsheim
Deutschland

0049-7261-1011
0049-7261-63966
info@frech-maschinen.de
www.frech-maschinen.de

#1073-96910 · Hydr. pressbrake

BAYKAL - APH 3708 x 180 - - 1999 -

Technical details

pressure 180 t

chamfer lenght 3700 mm

distance between columns 3250 mm

throat 270 mm

stroke 220 mm

ajustment speed 80,0 mm/sec

working feed 10,0 mm/sec

return speed 58,0 mm/sec

dayligth 395 mm

table width 200 mm

work height max. 870 mm

oil volume 210 ltr.

total power requirement 15,0 kW

weight of the machine ca. 12100 kg.

range L-W-H 4200 x 1470 x 2550 mm

Description :

** from a maintenance workshop (!!)

Furnishing:
- conventional electro-hydraulic press brake
* with torsion shaft for parallelism of the upper beam
- electric back gauge, with ball screws (X axis)
* with 2x manually adjustable stop fingers
* Fine adjustment via handwheel at the front, with analogue position display
- electro-motor adjustment of the immersion depth (Y1+Y2 axis)
* with digital position display
- swiveling operation, mounting side on the left
- 1x set of upper tools / additional divided tools
- 1x rotating Multi V universal matrix block
- 2x front / sliding support arms
- freely movable 2-hand foot control
- Operation manual

Datasheet

used Machines available immediately Hydr. pressbrake BAYKAL APHS 4.109 x 220

Jansen Machinehandel BV
Bredaseweg 210
4873 LA Etten-leur
Nederland

+31 (0) 76 5015750
info@jansenmachinehandel.nl
www.jansenmachinehandel.nl

#2049-KAN203 · Hydr. pressbrake

BAYKAL - APHS 4.109 x 220 - - -

Technical details

Capacity 220 T︱Bend length 4100 mm︱Control Delem DA-GGW ︱

Control: Delem DA-GGW Capacity: 220 T Bend length: 4.100 mm Stroke: 260 mm Machine dimensions: 4.800 x 1.800 x 2.800 mm Machine weight: 16.000 kg Incl. bearings Electric back stop With various tooling

Capacity 220 T

Bend length 4100 mm

Control Delem DA-GGW

Description :

Control: Delem DA-GGW
Capacity: 220 T
Bend length: 4.100 mm
Stroke: 260 mm
Machine dimensions: 4.800 x 1.800 x 2.800 mm
Machine weight: 16.000 kg
Incl. bearings
Electric back stop
With various tooling

Datasheet

Notching Machine

Jansen Machinehandel BV
Bredaseweg 210
4873 LA Etten-leur
Nederland

+31 (0) 76 5015750
info@jansenmachinehandel.nl
www.jansenmachinehandel.nl

#2049-S384 · Notching Machine

Baykal - HKA 200x6 - - 2018 -

Technical details

Knife length 200 mm︱Plate thickness 6 mm︱Machine dimensions (lxwxh) 920 x 1.150 x 1.300 mm︱

Brand Baykal Machine no S384 Type HKA 200x6 Year of make 2018 Machine dimensions (L×W×H) 920 x 1.150 x 1.300 mm Blade length 200 mm Plate thickness 6 mm Hydraulic Variable angle Machine weight 1.200 kg

Knife length 200 mm

Plate thickness 6 mm

Machine dimensions (lxwxh) 920 x 1.150 x 1.300 mm

Description :

Brand Baykal
Machine no S384
Type HKA 200x6
Year of make 2018
Machine dimensions (L×W×H) 920 x 1.150 x 1.300 mm
Blade length 200 mm
Plate thickness 6 mm
Hydraulic
Variable angle
Machine weight 1.200 kg

Datasheet

Plate Shear - Hydraulic

A + B Werkzeuge Maschinen Handels GmbH
Rottweg 17
48683 Ahaus
Deutschland

(0049)-2561-9384-71
(0049)-2561-9384-36
info@ab-maschinen.de
www.ab-maschinen.de

#1008-9325325 · Plate Shear - Hydraulic

BAYKAL - HGL 3006 - - 2005 - DAC 310

Technical details

sheet width 3060 mm︱plate thickness 6.0 mm︱thickness at "Niro-steel" 4.0 mm︱distance between columns 3100 mm︱down holder 16 Stück︱no. of strokes 20 Hub/min︱oil volume 160 ltr.︱cutting angle 1.6 °︱Control DAC 310 ︱total power requirement 11.0 kW︱weight 5450 kg︱range L-W-H 3800 x 1940 x 1560 mm︱

Furnishing: - electro-hydraulic swing cutting shears including sheet metal holding device - DELEM CNC control unit, model “DAC 310” * Travel distance back gauge X = 750 mm * Backlash-free ball screw for back gauge * Speed 100 mm/sec - electrical cutting length limitation * Cutting length limitation to increase the number of strokes/min. - electro-motoric cutting gap adjustment - Tip operation with push buttons on the control panel on the left - front support plates with ball rollers - front finger/intervention protection - 1x side stop with T-slot & millimeter scale - 3x front support arms - original operating instructions including CE declaration ** Special accessories included: - pneumatic sheet metal holding device for thin sheet metal cuts - electro-motoric cutting gap adjustment Machinelink: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325325

sheet width 3060 mm

plate thickness 6.0 mm

thickness at "Niro-steel" 4.0 mm

distance between columns 3100 mm

down holder 16 Stück

no. of strokes 20 Hub/min

oil volume 160 ltr.

cutting angle 1.6 °

Control DAC 310

total power requirement 11.0 kW

weight 5450 kg

range L-W-H 3800 x 1940 x 1560 mm

Description :

Furnishing:
- electro-hydraulic swing cutting shears including sheet metal holding device
- DELEM CNC control unit, model “DAC 310”
* Travel distance back gauge X = 750 mm
* Backlash-free ball screw for back gauge
* Speed 100 mm/sec
- electrical cutting length limitation
* Cutting length limitation to increase the number of strokes/min.
- electro-motoric cutting gap adjustment
- Tip operation with push buttons on the control panel on the left
- front support plates with ball rollers
- front finger/intervention protection
- 1x side stop with T-slot & millimeter scale
- 3x front support arms
- original operating instructions including CE declaration

** Special accessories included:
- pneumatic sheet metal holding device for thin sheet metal cuts
- electro-motoric cutting gap adjustment

Machinelink:
http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325325

Datasheet

Frech GmbH
Werderstr. 82
74889 Sinsheim
Deutschland

0049-7261-1011
0049-7261-63966
info@frech-maschinen.de
www.frech-maschinen.de

#1073-94160 · Plate Shear - Hydraulic

BAYKAL - HGL 3006 - - 2005 - DAC 310

Technical details

sheet width 3060 mm︱plate thickness 6,00 mm︱thickness at "Niro-steel" 4,00 mm︱distance between columns 3100 mm︱down holder 16 Stück︱no. of strokes 20 Hub/min︱oil volume 160 ltr.︱cutting angle 1.6 °︱Control DAC 310 ︱total power requirement 11.0 kW︱weight 5450 kg︱range L-W-H 3800 x 1940 x 1560 mm︱

sheet width 3060 mm

plate thickness 6,00 mm

thickness at "Niro-steel" 4,00 mm

distance between columns 3100 mm

down holder 16 Stück

no. of strokes 20 Hub/min

oil volume 160 ltr.

cutting angle 1.6 °

Control DAC 310

total power requirement 11.0 kW

weight 5450 kg

range L-W-H 3800 x 1940 x 1560 mm

Description :

Furnishing:
- electro-hydraulic swing cutting shears including sheet metal holding device
- DELEM CNC control unit, model “DAC 310”
* Travel distance back gauge X = 750 mm
* Backlash-free ball screw for back gauge
* Speed 100 mm/sec
- electrical cutting length limitation
* Cutting length limitation to increase the number of strokes/min.
- electro-motoric cutting gap adjustment
- Tip operation with push buttons on the control panel on the left
- front support plates with ball rollers
- front finger/intervention protection
- 1x side stop with T-slot & millimeter scale
- 3x front support arms
- original operating instructions including CE declaration

** Special accessories included:
- pneumatic sheet metal holding device for thin sheet metal cuts
- electro-motoric cutting gap adjustment

Datasheet

used Machines available immediately Plate Shear - Hydraulic BAYKAL HGL 3100 x 8

A + B Werkzeuge Maschinen Handels GmbH
Rottweg 17
48683 Ahaus
Deutschland

(0049)-2561-9384-71
(0049)-2561-9384-36
info@ab-maschinen.de
www.ab-maschinen.de

#1008-9325329 · Plate Shear - Hydraulic

BAYKAL - HGL 3100 x 8 - - 2002 -

Technical details

sheet width 3060 mm︱plate thickness 8.0 mm︱thickness at "Niro-steel" 6.0 mm︱distance between columns 3100 mm︱down holder 16 Stück︱no. of strokes 10 Hub/min︱oil volume 160 ltr.︱cutting angle 1.6 °︱Number of working hours ca. 2.100 h︱back stop - adjustable 6.0 - 750 mm︱Control ︱total power requirement 18.5 kW︱weight 6300 kg︱range L-W-H 3900 x 2300 x 1630 mm︱

** from a maintenance workshop ** hardly used - only approx. 2.100 operating hours (!!) ** New price approx. 40.000 euros ** Special price on request Furnishing: - electro-hydraulic swing cutting shears - ELGO digital display model P9521, for electric back gauge * Travel distance back gauge X = 750 mm * Backlash-free ball screw for back gauge * Back gauge beam can be automatically tilted up to maximum position * for pushing extra long sheets through * Travel speed 100 mm/sec - 1x stable side stop * with T-slot, flip stop and millimeter scale - 2x front, stable support arms - electrical cutting length limitation * Cutting length limitation to increase the number of strokes/min. - manual cutting gap adjustment * Can be operated centrally on the right side stand - front support plates with ball rollers - front finger/intervention protection - Tip operation with push buttons on the control panel on the left - Protective grille = safety device behind the machine - original operating instructions including CE declaration * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325329

sheet width 3060 mm

plate thickness 8.0 mm

thickness at "Niro-steel" 6.0 mm

distance between columns 3100 mm

down holder 16 Stück

no. of strokes 10 Hub/min

oil volume 160 ltr.

cutting angle 1.6 °

Number of working hours ca. 2.100 h

back stop - adjustable 6.0 - 750 mm

total power requirement 18.5 kW

weight 6300 kg

range L-W-H 3900 x 2300 x 1630 mm

Description :

** from a maintenance workshop
** hardly used - only approx. 2.100 operating hours (!!)
** New price approx. 40.000 euros
** Special price on request

Furnishing:
- electro-hydraulic swing cutting shears
- ELGO digital display model P9521, for electric back gauge
* Travel distance back gauge X = 750 mm
* Backlash-free ball screw for back gauge
* Back gauge beam can be automatically tilted up to maximum position
* for pushing extra long sheets through
* Travel speed 100 mm/sec
- 1x stable side stop
* with T-slot, flip stop and millimeter scale
- 2x front, stable support arms
- electrical cutting length limitation
* Cutting length limitation to increase the number of strokes/min.
- manual cutting gap adjustment
* Can be operated centrally on the right side stand
- front support plates with ball rollers
- front finger/intervention protection
- Tip operation with push buttons on the control panel on the left
- Protective grille = safety device behind the machine
- original operating instructions including CE declaration

* Machine link:
http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325329

Datasheet