Drill Grinding Machine

drill diameter 3 - 50 mm︱drilling length 500 mm︱lip angle 90 - 140 °︱total power requirement kW︱weight of the machine ca. 120 kg︱dimensions of the machine ca. 850 x 600 x 1300 mm︱

---

drill diameter 1,5 - 25 mm︱lip angle 40 - 180 °︱6-jaw-chucks ︱various equipment ︱manual included ︱

---

Encapsulated drive motor: closed version, air-cooled, rotary and AC drills with cylindrical or conical shank left and right-hand drills 6 Jaw chuck Device for compressed air cooling various equipment (see pictures)

drill diameter 40 mm︱drilling length 500 mm︱lip angle 160 °︱clearance angle 1 - 10 °︱toolpiece turning speed range 42/28/21 U/min︱feed range 0,6-1,2-1,5-3,0 mm/min︱grinding wheel size 210 x 127 x 50 mm︱grinding spindle speed 3150 U/min︱power capacity 3,3 kW︱weight of the machine ca. 1200 kg︱

---

drill diameter 3 - 50 mm︱drilling length 500 mm︱lip angle 90 - 140 °︱voltage 380 V︱weight of the machine ca. 120 kg︱dimensions of the machine ca. 0,80 x 0,60 x 1,30 m︱

---

Serial-No.: 76658

drill diameter 1-20 mm︱drilling length 1000 mm︱lip angle 80-150 °︱clearance angle 0-40 °︱turning speeds 2800 U/min︱total power requirement 0,3 kW︱weight of the machine ca. 42 kg︱dimensions of the machine ca. 1 x 0,5 m︱

---

Optical precision drill grinding machine from Berger /CH for twist drills made of HSS and VHM ( solid carbide ) very good condition for drills with diameter 1 to 20 mm point angle 80° to 150 degrees cutting / clearance angle 0° to 40 degrees electrical connection 230 Volt / 50 HZ

drill diameter 8 - 40 mm︱lip angle 70 - 180 °︱clearance angle 5 - 9 °︱speeds of grinding spindle 2750 U/min︱total power requirement 1,1 kW︱weight of the machine ca. 0,25 t︱dimensions of the machine ca. 0,9 x 1 x 1,5 m︱

---

• coolant device

drill diameter 2 - 26 mm︱turning speeds 2800 U/min︱total power requirement 0,75 kW︱weight of the machine ca. 190 kg.︱range L-W-H ca. 1200 x 800 x 1400 mm︱Electric 380 Volt ︱Cooling equipment ︱Grinding wheel ︱Chuck 6 -Backen ︱

---

Machine dealer with own stock of 2500 m².

drill diameter 3-40 mm︱drilling length 500 mm︱lip angle 15 - 75 °︱total power requirement 4,1 kW︱weight of the machine ca. 1,5 t︱dimensions of the machine ca. 1,80x1,60x1,40 m︱

---

drill diameter 32 mm︱drill diameter 32 mm︱drilling length 0 mm︱drilling length 0 mm︱lip angle °︱lip angle °︱total power requirement kW︱total power requirement kW︱weight of the machine ca. t︱weight of the machine ca. t︱dimensions of the machine ca. m︱dimensions of the machine ca. m︱

---

Universal Drill Bit Grinder lots of accessories

drill diameter 17,5 mm︱drilling length 100 mm︱lip angle 0-180 °︱total power requirement 0,55 kW︱weight of the machine ca. 30 kg︱dimensions of the machine ca. 1 x 0,5 m︱

---

Drill grinding machine Friedrich Deckel S0 - grinding wheel dimensions approx. 100 x 50 x 20 mm - largest grindable angle 0 - 180 ° - largest grinding length 90 mm - largest grinding radius 10 mm - largest bore of the collets 17,5 mm - largest lateral displacement of the cutter holder 10 mm each - largest longitudinal displacement of the cutter holder 40 mm - Largest adjustable relief angle 45 °. - Coarse adjustment of the dividing head support in the tube guide 100 mm - Largest fine adjustment of the dividing head support - parallel to the grinding spindle 15 mm - Spindle speed 4500 1/min - Drive 400 V / 0.55 kW

drill diameter . mm︱drilling length . mm︱lip angle . °︱total power requirement kW︱weight of the machine ca. 0,8 t︱dimensions of the machine ca. 1,5x1x1,9 m︱

---

drill diameter für max. 60 mm Bohrer ︱weight of the machine ca. 389 kg︱

---

drill diameter 40 mm︱turning speeds 2800 U/min︱lip angle 60 - 180 °︱relief angle 3,0 - 25 °︱tool length - max. 344 mm︱total power requirement 0,85 kW︱weight of the machine ca. 238 kg.︱range L-W-H 0,86 x 0,66 x 1,19 m︱Electric 380 Volt ︱Base with extraction system ︱Grinding wheel 200 mm︱

---

Twist drill grinding machine for right-hand twist drills, bores with 3 or 4 cutting edges. Tool holder - cylinder or taper shank. Machine dealer with own stock of 2500 m².

grinding range 2 - 13 mm︱sharp cornered angle min./max. 90 - 140 Grad︱connected load 230 V︱weight of the machine ca. 10 Kg︱dimensions of the machine ca. 0,35 x 0,2 x 0,2 m︱

---

grinding range 2 - 13 mm︱sharp cornered angle min./max. 90 - 140 Grad︱connected load 230 V︱weight of the machine ca. 10 Kg︱dimensions of the machine ca. 0,35 x 0,2 x 0,2 m︱

---

grinding range max. 30 mm︱angle adjustable from - to horizontal 0-180 Grad︱angle adjustable from - to vertikal 0-45 Grad︱angle adjustable from - to negativ 0-52 Grad︱connected load 230 V︱wheel diameter 100 mm︱weight of the machine ca. 55 Kg︱dimensions 0,5 x 0,4 x 0,4 m︱

---

This grinding machine is suitable for: Twist drill (max.13mm), milling cutter and turning tool (max. 30mm) comes with: - chisel grinding tool - Diamond grinding stone for HM. - White whetstone for HSS. - LED lighting - All adjustment tools. - Diamond dresser for sharpening stones. C-5 collet set with the following sizes. 1.5 - 2 - 3 - 4 - 5 - 6 - 7 - 8 -9 -10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 mm.

grinding range 8 - 32 mm︱sharp cornered angle min./max. 90 - 140 Grad︱connected load 230 V︱weight of the machine ca. 16 Kg︱dimensions of the machine ca. 0,43 x 0,24 x 0,24 m︱

---

Drill grinding machine: Additional station for grinding back the drilling cutting surface (clearance angle) 25tk. Collets ER 40 are included in the scope of delivery, these are also suitable for clamping intermediate sizes. For grinding twist drills made of HSS and Hard metals with a TiN layer of 8 - 32 mm. Rotor with precision ball bearings guarantees smooth running. Vibration-free running thanks to its heavy weight and rubber feet. Sharpening angle adjustable for all common twist drills. Package dimensions: 430 x 240 x 240mm. Weight 16kg.

grinding range 2 - 20 mm︱sharp cornered angle min./max. 90 - 135 Grad︱connected load 230 V︱weight of the machine ca. 8,6 Kg︱dimensions of the machine ca. 0,35 x 0,2 x 0,2 m︱

---

drill diameter 40 mm︱drilling length x mm︱lip angle 50-180 °︱weight of the machine ca. 0.5 t︱dimensions of the machine ca. 1.4x1.2x1.5 m︱

---

Point thinning device www.marcels-maschinen.ch

drill diameter 1,5-26 mm︱drilling length x mm︱lip angle 180 °︱weight of the machine ca. 0.05 t︱

---

More details on www.marcels-maschinen.ch

drill diameter 3 - 50 mm︱dust exhaust inklusive ︱ inklusive ︱ ︱ ︱

---

drill diameter 2-40 mm︱drilling length x mm︱lip angle 40-180 °︱weight of the machine ca. 0.4 t︱

---

Dressing device Point thinning attachment More details on www.marcels-maschinen.ch

dia. of draw-in collets 4 - 24 mm︱max. radius to grind 12 mm︱grinding range 4 - 24 mm︱grinding wheel-diameter 100 mm︱total power requirement 0,4 kW︱weight of the machine ca. 100 kg︱dimensions of the machine ca. 1 x 0,6 x 0,4 m︱Electric 380 Volt ︱Base with drawer ︱Diverse collets ︱Draw-off device ︱

---

Machine has 19 clamping devices 4-14 mm, 12 pieces of grinding wheels 100 mm, puller for grinding wheel. Machine dealer with own stock of 2500 m².

dia. of draw-in collets 0 - 25 mm︱internal taper of cone draw-in collets MK 4 ︱max. grinding diameter 130 / 250 mm︱grinding length 250 mm︱workpiece length 300 mm︱turning speeds 3750 / 7500 U/min︱longitudinal feed 260 mm︱cross travel 70 mm︱max. radius to grind mm︱total power requirement 0,7 kW︱weight of the machine ca. 0,6 t︱dimensions of the machine ca. 1,0 x 0,8 x 1,5 m︱

---