European network of stockholding machinery dealers

Category:
    Manufacturer:
      Machines:
        Trader:

          Sheet metal working - shaeres - bending

          Machinelist: Sheet metal working / shaeres / bending


          Cut-to-length-lines

          used Sheet metal working / shaeres / bending Cut-to-length-lines STEINER HTS 18/25 So.


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-26537 · Cut-to-length-lines

          STEINER - HTS 18/25 So. - - 1993 -

          Technical details
          sheet width 1600 mm︱plate thickness 6 - 20 mm︱no. of strokes 1-15 Hub/min︱Number of Straightening rolls 11 ︱straightening feed 10 m/min︱straightening roll diameter 160 mm︱adjustment 10- 40 mm︱coil weight 35 t︱total power requirement 115 kW︱weight of the machine ca. 85 t︱dimensions of the machine ca. 25 x 5 x 3 m︱
          Line consists out of double sided cone decoiler, leveling machine UBR 1600 x 20 and a Steiner shearing machine with 1800 x 25 mm capacity. Line works automatically.
            sheet width 1600 mm
            plate thickness 6 - 20 mm
            no. of strokes 1-15 Hub/min
            Number of Straightening rolls 11
            straightening feed 10 m/min
            straightening roll diameter 160 mm
            adjustment 10- 40 mm
            coil weight 35 t
            total power requirement 115 kW
            weight of the machine ca. 85 t
            dimensions of the machine ca. 25 x 5 x 3 m
            Description :
            Line consists out of double sided cone decoiler, leveling machine UBR 1600 x 20
            and a Steiner shearing machine with 1800 x 25 mm capacity. Line works
            automatically.
          Datasheet
          Request / Contact

          Folding Machine

          used Sheet metal working / shaeres / bending Folding Machine WEINGARTEN QFSOH V


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-19133 · Folding Machine

          WEINGARTEN - QFSOH V - - 1987 -

          Technical details
          sheet width 3000 mm︱plate thickness 12 mm︱distance between columns 3100 mm︱total power requirement 12 kW︱weight of the machine ca. 15 t︱dimensions of the machine ca. 4 x 2,5 x 2,7 m︱
          Machine was complete reconditioned in 1987. Original Year of manufacture is 1958.
            sheet width 3000 mm
            plate thickness 12 mm
            distance between columns 3100 mm
            total power requirement 12 kW
            weight of the machine ca. 15 t
            dimensions of the machine ca. 4 x 2,5 x 2,7 m
            Description :
            Machine was complete reconditioned in 1987. Original Year of manufacture is
            1958.
          Datasheet
          Request / Contact

          Hand-Lever Shear

          used Sheet metal working / shaeres / bending Hand-Lever Shear PEDDINGHAUS 4 RP 8


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-26642 · Hand-Lever Shear

          PEDDINGHAUS - 4 RP 8 - - 1984 -

          Technical details
          sheet width - max. 40 mm︱plate thickness 8 mm︱L-beam 40 x 6 mm︱weight of the machine ca. 0,08 t︱dimensions of the machine ca. 1 x 1 x 1,5 m︱
            sheet width - max. 40 mm
            plate thickness 8 mm
            L-beam 40 x 6 mm
            weight of the machine ca. 0,08 t
            dimensions of the machine ca. 1 x 1 x 1,5 m
          Datasheet
          Request / Contact

          Hydr. pressbrake

          used Sheet metal working / shaeres / bending Hydr. pressbrake PROMECAM RG-80-30


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-19135 · Hydr. pressbrake

          PROMECAM - RG-80-30 - - 1981 - konv.

          Technical details
          pressure 0080 t︱chamfer lenght 3000 mm︱distance between columns 3100 mm︱Control konv. ︱throat 200 mm︱table width 150 mm︱stroke max. 200 mm︱dayligth 400 mm︱feed down mm/sec︱feed up mm/sec︱feed under pressure mm/sec︱total power requirement 11 kW︱weight of the machine ca. 6 t︱dimensions of the machine ca. 3,5 x 2 x 2 m︱
          Machine will be supplied with many tools.
            pressure 0080 t
            chamfer lenght 3000 mm
            distance between columns 3100 mm
            Control konv.
            throat 200 mm
            table width 150 mm
            stroke max. 200 mm
            dayligth 400 mm
            total power requirement 11 kW
            weight of the machine ca. 6 t
            dimensions of the machine ca. 3,5 x 2 x 2 m
            Description :
            Machine will be supplied with many tools.
          Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake WIEGER AWHC 160/45 HH 300


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-19129 · Hydr. pressbrake

          WIEGER - AWHC 160/45 HH 300 - - 1980 - konv.

          Technical details
          pressure 0160 t︱chamfer lenght 5120 mm︱distance between columns 4050 mm︱Control konv. ︱throat 300 mm︱table width 200 mm︱stroke max. 200 mm︱dayligth 400 mm︱feed down 50 mm/sec︱feed up 100 mm/sec︱feed under pressure 5 mm/sec︱total power requirement 11 kW︱weight of the machine ca. 16 t︱dimensions of the machine ca. 5,4 x 1,75 x 3,3 m︱
          Machine will be supplied with many tools.
            pressure 0160 t
            chamfer lenght 5120 mm
            distance between columns 4050 mm
            Control konv.
            throat 300 mm
            table width 200 mm
            stroke max. 200 mm
            dayligth 400 mm
            feed down 50 mm/sec
            feed up 100 mm/sec
            feed under pressure 5 mm/sec
            total power requirement 11 kW
            weight of the machine ca. 16 t
            dimensions of the machine ca. 5,4 x 1,75 x 3,3 m
            Description :
            Machine will be supplied with many tools.
          Datasheet
          Request / Contact

          Pipe-Bending Machine

          used Sheet metal working / shaeres / bending Pipe-Bending Machine CESURBEND PBH 32


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-18515 · Pipe-Bending Machine

          CESURBEND - PBH 32 - - 2021 -

          Technical details
          tube diameter 32 mm︱wall strength 2 mm︱bending radius min. 50 - 275 mm︱bending angle max. 190 °︱Tube length 1750 mm︱total power requirement 2,5 kW︱weight of the machine ca. 0,4 t︱dimensions of the machine ca. 1,95 x 1 x 1,1 m︱
          Manual bending machine.
            tube diameter 32 mm
            wall strength 2 mm
            bending radius min. 50 - 275 mm
            bending angle max. 190 °
            Tube length 1750 mm
            total power requirement 2,5 kW
            weight of the machine ca. 0,4 t
            dimensions of the machine ca. 1,95 x 1 x 1,1 m
            Description :
            Manual bending machine.
          Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Pipe-Bending Machine CESURBEND PBNC 65 (A)


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-18514 · Pipe-Bending Machine

          CESURBEND - PBNC 65 (A) - - 2021 - Microsoft

          Technical details
          tube diameter 65 mm︱wall strength 3,5 mm︱bending radius min. 70 - 250 mm︱Control Microsoft ︱bending angle max. 190 °︱Tube length 2750 mm︱total power requirement 12 kW︱weight of the machine ca. 1,5 t︱dimensions of the machine ca. 3 x 1,4 x 1,5 m︱
          Semi automatic machine with bending by CNC, feeding and turning of pipe manual controled by DRO. Bending is controled by CNC.
            tube diameter 65 mm
            wall strength 3,5 mm
            bending radius min. 70 - 250 mm
            Control Microsoft
            bending angle max. 190 °
            Tube length 2750 mm
            total power requirement 12 kW
            weight of the machine ca. 1,5 t
            dimensions of the machine ca. 3 x 1,4 x 1,5 m
            Description :
            Semi automatic machine with bending by CNC, feeding and turning of pipe manual
            controled by DRO. Bending is controled by CNC.
          Datasheet
          Request / Contact

          Plate Bending Machine - 3 Rolls

          used Sheet metal working / shaeres / bending Plate Bending Machine - 3 Rolls CESURBEND MR 1270 x 75


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-18240 · Plate Bending Machine - 3 Rolls

          CESURBEND - MR 1270 x 75 - - 2021 -

          Technical details
          sheet width 1270 mm︱plate thickness 1,5 mm︱pre-bending 1 ︱roll diam. toproll 75 mm︱roll diam. bottom roll 75 mm︱roll speed 6 m/min︱total power requirement 1,1 kW︱weight of the machine ca. 0,55 t︱
          Motor driven machine with non symetric roll configuration.
            sheet width 1270 mm
            plate thickness 1,5 mm
            pre-bending 1
            roll diam. toproll 75 mm
            roll diam. bottom roll 75 mm
            roll speed 6 m/min
            total power requirement 1,1 kW
            weight of the machine ca. 0,55 t
            Description :
            Motor driven machine with non symetric roll configuration.
          Datasheet
          Request / Contact

          Plate Shear - Hydraulic

          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic STEINER HTS 30/16


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-18181 · Plate Shear - Hydraulic

          STEINER - HTS 30/16 - - 1994 -

          Technical details
          sheet width 3000 mm︱plate thickness 16 mm︱distance between columns 3200 mm︱throat 310 mm︱stroke 300 mm︱table width 820 mm︱table height over floor 1215 mm︱Number of downholders 12 St.︱cutting angle 0,5 - 2,5 °︱total power requirement 30 kW︱weight of the machine ca. 19 t︱dimensions of the machine ca. 3,8 x 2,65 x 2,85 m︱
          Machine was overhauled in 2010 and was modernized with light barrier at table. Machine will be sold with automatic back stop with DRO.
            sheet width 3000 mm
            plate thickness 16 mm
            distance between columns 3200 mm
            throat 310 mm
            stroke 300 mm
            table width 820 mm
            table height over floor 1215 mm
            Number of downholders 12 St.
            cutting angle 0,5 - 2,5 °
            total power requirement 30 kW
            weight of the machine ca. 19 t
            dimensions of the machine ca. 3,8 x 2,65 x 2,85 m
            Description :
            Machine was overhauled in 2010 and was modernized with light barrier at table.
            Machine will be sold with automatic back stop with DRO.
          Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic STEINER HTS 18/25 So.


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-18177 · Plate Shear - Hydraulic

          STEINER - HTS 18/25 So. - - 1993 -

          Technical details
          sheet width 1800 mm︱plate thickness 25 mm︱distance between columns 2600 mm︱throat 310 mm︱stroke 300 mm︱table width 820 mm︱table height over floor 1215 mm︱total power requirement 41 kW︱
          Machine is part of a cut to length line and has no back gauge. It has a roller measuring arrangement for measuring the length of a sheet in front of the shearing blade. Machine does not have single down holder cylinders but one down holder beam.
            sheet width 1800 mm
            plate thickness 25 mm
            distance between columns 2600 mm
            throat 310 mm
            stroke 300 mm
            table width 820 mm
            table height over floor 1215 mm
            total power requirement 41 kW
            Description :
            Machine is part of a cut to length line and has no back gauge. It has a roller
            measuring arrangement for measuring the length of a sheet in front of the
            shearing blade. Machine does not have single down holder cylinders but one down
            holder beam.
          Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic STEINER HTS 40/13 C


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-18182 · Plate Shear - Hydraulic

          STEINER - HTS 40/13 C - - 1991 -

          Technical details
          sheet width 4000 mm︱plate thickness 13 mm︱distance between columns 4200 mm︱throat 310 mm︱stroke 300 mm︱table width 820 mm︱table height over floor 1215 mm︱Number of downholders 16 St.︱cutting angle 0,5 - 2,5 °︱Control ︱total power requirement 30 kW︱weight of the machine ca. 27 t︱dimensions of the machine ca. 4,8 x 2,65 x 2,85 m︱
          This machine has a light guard on front side and light sensoric on back side. Machine has a finished part hold up and transport system. Length of cut and number of cuts is controled. Machine will be supplied with an additional set of knifes.
            sheet width 4000 mm
            plate thickness 13 mm
            distance between columns 4200 mm
            throat 310 mm
            stroke 300 mm
            table width 820 mm
            table height over floor 1215 mm
            Number of downholders 16 St.
            cutting angle 0,5 - 2,5 °
            total power requirement 30 kW
            weight of the machine ca. 27 t
            dimensions of the machine ca. 4,8 x 2,65 x 2,85 m
            Description :
            This machine has a light guard on front side and light sensoric on back side.
            Machine has a finished part hold up and transport system. Length of cut and
            number of cuts is controled. Machine will be supplied with an additional set of
            knifes.
          Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic WIEGER Alpha 10/30


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-18184 · Plate Shear - Hydraulic

          WIEGER - Alpha 10/30 - - 1986 -

          Technical details
          sheet width 3000 mm︱plate thickness 10 mm︱distance between columns 3100 mm︱total power requirement 12 kW︱weight of the machine ca. 5 t︱dimensions of the machine ca. 4 x 2 x 2 m︱
          Electrical- hydraulical operated shearing machine with motor driven back stop. Adjustment of back stop by DRO. Machine works in the swinging beam system.
            sheet width 3000 mm
            plate thickness 10 mm
            distance between columns 3100 mm
            total power requirement 12 kW
            weight of the machine ca. 5 t
            dimensions of the machine ca. 4 x 2 x 2 m
            Description :
            Electrical- hydraulical operated shearing machine with motor driven back stop.
            Adjustment of back stop by DRO. Machine works in the swinging beam system.
          Datasheet
          Request / Contact

          Profile-Bending Machine

          used Sheet metal working / shaeres / bending Profile-Bending Machine CESURBEND PB 35


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-1883 · Profile-Bending Machine

          CESURBEND - PB 35 - - 2021 -

          Technical details
          flat steel 40 x 10 (R=200) mm︱flat steel 60 x 15 (R=150) mm︱U-iron on the x-axis UPN60 (R=400) mm︱shaft diameter 50 mm︱upper roll diameter 155 mm︱lower roll diameter 148 mm︱work speed 4,5 m/min︱total power requirement 1,5 kW︱weight of the machine ca. 400 kg︱dimensions of the machine ca. 1,2 x 1 x 1 m︱
            flat steel 40 x 10 (R=200) mm
            flat steel 60 x 15 (R=150) mm
            U-iron on the x-axis UPN60 (R=400) mm
            shaft diameter 50 mm
            upper roll diameter 155 mm
            lower roll diameter 148 mm
            work speed 4,5 m/min
            total power requirement 1,5 kW
            weight of the machine ca. 400 kg
            dimensions of the machine ca. 1,2 x 1 x 1 m
            Description :

          Datasheet
          Request / Contact

          Roller leveller

          used Sheet metal working / shaeres / bending Roller leveller WMW-BLEMA UBR 1600 x 20


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-90025 · Roller leveller

          WMW-BLEMA - UBR 1600 x 20 - - 1983 -

          Technical details
          material width 1650 mm︱material thickness 6 - 20 mm︱no. of straightening rolls 11 ︱straightening feed 10 m/min︱straightening roll diameter 160 mm︱adjustment 10- 40 mm︱total power requirement 76 kW︱weight of the machine ca. 39,2 t︱
          Machine does have exchange cassettes of rolls. We supply 1 set of extra cassetes along with the machine. Rolls are supported by backup rolls.
            material width 1650 mm
            material thickness 6 - 20 mm
            no. of straightening rolls 11
            straightening feed 10 m/min
            straightening roll diameter 160 mm
            adjustment 10- 40 mm
            total power requirement 76 kW
            weight of the machine ca. 39,2 t
            Description :
            Machine does have exchange cassettes of rolls. We supply 1 set of extra
            cassetes along with the machine. Rolls are supported by backup rolls.
          Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Roller leveller BLEMA-GOTHA UBR 7,1x1250


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-90021 · Roller leveller

          BLEMA-GOTHA - UBR 7,1x1250 - - 1975 -

          Technical details
          material width 1250 mm︱material thickness 2 - 7,1 mm︱no. of straightening rolls 17 ︱total power requirement 50 kW︱weight of the machine ca. 21,5 t︱dimensions of the machine ca. 4 x 2 x 2 m︱
            material width 1250 mm
            material thickness 2 - 7,1 mm
            no. of straightening rolls 17
            total power requirement 50 kW
            weight of the machine ca. 21,5 t
            dimensions of the machine ca. 4 x 2 x 2 m
            Description :

          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

            Trader Profile:   Karl Günter Wirths GmbH

          Contact Trader



            Karl Günter Wirths GmbH
           Scharpenberger Strasse 96-98
            58256 Ennepetal
            Deutschland
            02333-79050">02333-79050
            02333-790555
            sales@wirths.net
            www.wirths.net

          Profile of Trader

          About us - Wirths GmbH in Ennepetal

          wirths gmbh.Karl G. Wirths founded the company in 1956 as a mechanical workshop. 1961 he developed a die shop for pressing and forming dies. In that time 30 employees were working as die makers in the work shop.
           
          Parallel Karl G. Wirths started a shop for refurbishment of machine tools. That was also the start for the machine tool business.

          The die shop was closed 1972 but the machine tool business was developed.

          In 1972 the first stock was erected. Up to now buildings with up to 50 t crane capacity.

          In that stock we always keep approx. 250 machines.

          We are not focused on a one time business but on a long term business relative with our domestic customers and customers from all places around the world.

          Contact us

          Wirths GmbHKarl Günter Wirths GmbH
          Scharpenberger Str. 96-98
          D-58256 Ennepetal / Germany





          Used sheet metal working machines at LagerMaschinen.de
          Get your used sheet metal working machines at LagerMaschinen.de

          Sheet metal working machines are machines used in the metalworking process involved in the production of sheet metal. Some of the types of used sheet metal working machines involved in this process are lathes roll slitters brake presses and stamping presses to name just a few. These used sheet metal working machines are used to cut bend flatten and otherwise manipulate metal into the desired shape and thickness. Used sheet metal working machines can be used to roll or bend sheet metal into a desired shape and to give the fold or curve the desired angle they can also be used to punch the sheet metal into the desired shape.

          Used sheet metal working machines for every application

          From small home production labs for hobbyists to large-scale production facilities LagerMaschinen.de has used sheet metal working machines for every use. For some precision is not necessarily the most important consideration when choosing used sheet metal working machines. For others the precision and the flexibility of the used sheet metal working machines is the most important consideration. Whether you need bending folding cutting pressing or punching machines you will find what you are looking for at LagerMaschinen.de

          Quality used machines at LagerMaschinen.de

          For many companies the cost of new equipment can be a source of problems. With its international network of suppliers LagerMaschinen.de ensures that your used sheet metal working machines meet your quality requirements and at the same time guarantees a price that is far more cost-effective than new machines.

          Karl Günter Wirths GmbH   58256 Ennepetal Scharpenberger Strasse 96-98 Deutschland
          Karl Günter Wirths GmbH

          Scharpenberger Strasse 96-98



          Contact Trader


            Karl Günter Wirths GmbH
           Scharpenberger Strasse 96-98
            58256 Ennepetal
            Deutschland
            02333-79050
            02333-790555
            sales@wirths.net
            www.wirths.net
            Contact person:

           
          ACHTUNG: NEUE FAX Nr. 02333 790555




          Machine category


          Abkantpresse - hydraulisch · Anreißplatte · Aufspannplatte · Bandschleifmaschine · Bandsäge - horizontal · Bandsäge - Vertikal · Bearbeitungszentrum 5 Achs · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · Bohrwerkstisch · Bügelsäge · Bügelsäge - Automatisch · CNC Drehmaschine · Doppelständerpresse - Hydraulisch · Doppelständerziehpresse - Hydraulisch · Drehmaschine - zyklengesteuert · Dreiwalzen - Blechbiegemaschine · Einständerexzenterpresse · Einständerpresse - Hydraulisch · Endenbearbeitungsmaschine · Flachschleifmaschine - Horizontal · Fräsmaschine - Universal · Gabelstapler · Handhebel-Schere · Innenschleifmaschine · Karusselldrehmaschine - Einständer · Kreissäge - Automatisch · Mechanikerdrehbank · Messmaschine · Plan- und Spitzendrehbank · Plattenfeld · Pneumatische Presse · Profil- Ring- Biegemaschine · Querteilanlage · Radialbohrmaschine · Richtmaschine · Richtplatte · Richtpresse - Einständer · Rohrbiegemaschine · Rundschleifmaschine · Rundtisch-Bohrungs-Schleifmaschine · Schleifbock · Schwenkbiegemaschine · Senkerodiermaschine · Spindelpresse · Spitzendrehmaschine · Stangenzuführung · Stanzautomat-Doppelständer · Säulenbohrmaschine · Tafelschere - hydraulisch · Werkzeug Voreinstellgerät · Zahnrad-Abwälzfräsmaschine - vertikal · Zahnradstossmaschine ·