European network of stockholding machinery dealers

Category:
    Manufacturer:
      Machines:
        Trader:

          Metal Processing

          Machinelist: Metal Processing


          Center Lathe

          used Metal Processing Center Lathe STANKOIMPORT 1 M 63 B x 2800


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-2000121 · Center Lathe

          STANKOIMPORT - 1 M 63 B x 2800 - - 1982 -

          Technical details
          turning diameter over bed 0630 mm︱turning diameter over slide rest 350 mm︱turning length 2800 mm︱centre height 315 mm︱centre distance 2800 mm︱spindle bore 73 mm︱speeds 10 - 1250 U/min︱feeds longitudinal slide 0,06 - 1,4 mm/U︱feeds cross slide 0,024 - 0,518 mm/U︱weight of the machine ca. 5,6 t︱dimensions of the machine ca. 4,95 x 1,78 x 1,49 m︱voltage 380 V︱
            turning diameter over bed 0630 mm
            turning diameter over slide rest 350 mm
            turning length 2800 mm
            centre height 315 mm
            centre distance 2800 mm
            spindle bore 73 mm
            speeds 10 - 1250 U/min
            feeds longitudinal slide 0,06 - 1,4 mm/U
            feeds cross slide 0,024 - 0,518 mm/U
            weight of the machine ca. 5,6 t
            dimensions of the machine ca. 4,95 x 1,78 x 1,49 m
            voltage 380 V
            Description :

          Datasheet
          Request / Contact
          used Metal Processing Center Lathe MONDIALE Celtic 14


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-2000120 · Center Lathe

          MONDIALE - Celtic 14 - - 1981 -

          Technical details
          turning diameter over bed 0370 mm︱turning diameter over slide rest 240 mm︱turning length 1500 mm︱spindle turning speed range 36- 1600 U/min︱voltage 400 V︱feed per revolution mm︱rapid travel - longitudinal/face m/min︱spindle bore 35 mm︱total power requirement 3 kW︱weight of the machine ca. 1500 kg︱dimensions of the machine ca. 3 x 1,1 x 1,5 m︱
            turning diameter over bed 0370 mm
            turning diameter over slide rest 240 mm
            turning length 1500 mm
            spindle turning speed range 36- 1600 U/min
            voltage 400 V
            spindle bore 35 mm
            total power requirement 3 kW
            weight of the machine ca. 1500 kg
            dimensions of the machine ca. 3 x 1,1 x 1,5 m
            Description :

          Datasheet
          Request / Contact

          CNC Lathe

          used Metal Processing CNC Lathe GILDEMEISTER GD 200


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-203407 · CNC Lathe

          GILDEMEISTER - GD 200 - - 1985 - EPM

          Technical details
          turning diameter 0400 mm︱turning length 700 mm︱control EPM ︱total power requirement 17 kW︱weight of the machine ca. 3 t︱dimensions of the machine ca. 2,5 x 2 x 2 m︱
          Machine has EPM control. It is working , but could be used also as spare part supply.
            turning diameter 0400 mm
            turning length 700 mm
            control EPM
            total power requirement 17 kW
            weight of the machine ca. 3 t
            dimensions of the machine ca. 2,5 x 2 x 2 m
            Description :
            Machine has EPM control. It is working , but could be used also as spare part
            supply.
          Datasheet
          Request / Contact

          Facing and Centering Lathe

          used Metal Processing Facing and Centering Lathe ZERBST WMW DP1S3


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-2020 · Facing and Centering Lathe

          ZERBST WMW - DP1S3 - - 1990 -

          Technical details
          turning diameter over bed 1600 mm︱turning diameter over slide rest 1000 mm︱turning length 4000 mm︱faceplate diameter 1250 mm︱turning diameter over bed 1600 mm︱spindle bore 100 mm︱spindle turning speed range 3,55 - 450 U/min︱max. workpiece weight between centers 10000 kg︱rapid traverse 6 m/min︱total power requirement 30 kW︱weight of the machine ca. 20 t︱dimensions of the machine ca. 7 x 2,5 x 2,3 m︱
          Machines was reconditioned and modernized with new electrica in 2010. We will supply a fixed and a movable steady along with the machine. Furthermore we will supply some centers along with the machine.
            turning diameter over bed 1600 mm
            turning diameter over slide rest 1000 mm
            turning length 4000 mm
            faceplate diameter 1250 mm
            turning diameter over bed 1600 mm
            spindle bore 100 mm
            spindle turning speed range 3,55 - 450 U/min
            max. workpiece weight between ce. 10000 kg
            rapid traverse 6 m/min
            total power requirement 30 kW
            weight of the machine ca. 20 t
            dimensions of the machine ca. 7 x 2,5 x 2,3 m
            Description :
            Machines was reconditioned and modernized with new electrica in 2010. We will
            supply a fixed and a movable steady along with the machine. Furthermore we will
            supply some centers along with the machine.
          Datasheet
          Request / Contact

          Lathe - cycle-controlled

          used Metal Processing Lathe -  cycle-controlled SAILO Contur Dialog H 66


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-203409 · Lathe - cycle-controlled

          SAILO - Contur Dialog H 66 - - 2003 - Siemens 810 D

          Technical details
          turning diameter 0660 mm︱turning length 2000 mm︱control Siemens 810 D ︱turning dia. over face-slide 400 mm︱turret head 8 Pos. ︱bed width 433 mm︱max. workpiece weight between centers 2000 kg︱spindle turning speed range 2- 2500 U/min︱spindle bore 105 mm︱cross movement 340 mm︱longitudinal travel 1980 mm︱rapid traverse X-axis 8 m/min︱rapid traverse Z-axis 8 m/min︱total power requirement 22 kW︱weight of the machine ca. 4,7 t︱dimensions of the machine ca. 4 x 2,3 x 2 m︱
          Accessories: 3 jaw chuck hand operated and 3 toolholder for turret VDI 40.
            turning diameter 0660 mm
            turning length 2000 mm
            control Siemens 810 D
            turning dia. over face-slide 400 mm
            turret head 8 Pos.
            bed width 433 mm
            max. workpiece weight between ce. 2000 kg
            spindle turning speed range 2- 2500 U/min
            spindle bore 105 mm
            cross movement 340 mm
            longitudinal travel 1980 mm
            rapid traverse X-axis 8 m/min
            rapid traverse Z-axis 8 m/min
            total power requirement 22 kW
            weight of the machine ca. 4,7 t
            dimensions of the machine ca. 4 x 2,3 x 2 m
            Description :
            Accessories: 3 jaw chuck hand operated and 3 toolholder for turret VDI 40.
          Datasheet
          Request / Contact
          used Metal Processing Lathe -  cycle-controlled GORNATI CMG 750 NSXP


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-203402 · Lathe - cycle-controlled

          GORNATI - CMG 750 NSXP - - 1999 - Fagor 8055 T

          Technical details
          turning diameter 1500 mm︱turning length 1500 mm︱control Fagor 8055 T ︱turning diameter over bed slide 1250 mm︱total power requirement 45 kW︱weight of the machine ca. 12 t︱dimensions of the machine ca. 4 x 2,4 x 2,4 m︱
          Zubehör: Vierbackenfutter mit Backen, manuell betätigt, 7 Multifix Halter und ein Halter auf Capto.
            turning diameter 1500 mm
            turning length 1500 mm
            control Fagor 8055 T
            turning diameter over bed slide 1250 mm
            total power requirement 45 kW
            weight of the machine ca. 12 t
            dimensions of the machine ca. 4 x 2,4 x 2,4 m
            Description :
            Zubehör: Vierbackenfutter mit Backen, manuell betätigt, 7 Multifix Halter und
            ein Halter auf Capto.
          Datasheet
          Request / Contact

          Mechanician s Lathe

          used Metal Processing Mechanician s Lathe WEILER MDU 260


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-2000123 · Mechanician s Lathe

          WEILER - MDU 260 - - 1979 -

          Technical details
          turning diameter over bed 260 mm︱turning diameter over slide rest 150 mm︱turning length 400 mm︱turning speeds 140- 3550 U/min︱spindle bore 35 mm︱total power requirement 1,5 kW︱weight of the machine ca. 0,4 t︱dimensions of the machine ca. 1,6 x 0,7 x 1,5 m︱
          With accessories !
            turning diameter over bed 260 mm
            turning diameter over slide rest 150 mm
            turning length 400 mm
            turning speeds 140- 3550 U/min
            spindle bore 35 mm
            total power requirement 1,5 kW
            weight of the machine ca. 0,4 t
            dimensions of the machine ca. 1,6 x 0,7 x 1,5 m
            Description :
            With accessories !
          Datasheet
          Request / Contact

          Vertical Turret Lathe - Single Column

          used Metal Processing Vertical Turret Lathe - Single Column DOERRIES VCE 125/160


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-40094 · Vertical Turret Lathe - Single Column

          DOERRIES - VCE 125/160 - - - S 840 D

          Technical details
          faceplate diameter 1250 mm︱swing diameter 1600 mm︱turning height 1400 mm︱Control S 840 D ︱faceplate turning speed range 0- 280 U/min︱workpiece weight max. 12000 kg︱tool change unit 10 Pos.︱total power requirement 95 kW︱weight of the machine ca. 25 t︱dimensions of the machine ca. 3,5 x 3,2 x 5,1 m︱
          Machine was originally built in 1983 but retrofitted in 2007. Control: Siemens 840 D
            faceplate diameter 1250 mm
            swing diameter 1600 mm
            turning height 1400 mm
            Control S 840 D
            faceplate turning speed range 0- 280 U/min
            workpiece weight max. 12000 kg
            tool change unit 10 Pos.
            total power requirement 95 kW
            weight of the machine ca. 25 t
            dimensions of the machine ca. 3,5 x 3,2 x 5,1 m
            Description :
            Machine was originally built in 1983 but retrofitted in 2007. Control: Siemens
            840 D
          Datasheet
          Request / Contact

          Machining Center - Universal

          used Metal Processing Machining Center - Universal DECKEL-MAHO DMU 60 T


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-10163 · Machining Center - Universal

          DECKEL-MAHO - DMU 60 T - - 2000 -

          Technical details
          x-travel 0630 mm︱y-travel 560 mm︱z-travel 560 mm︱turning speeds 12.000 U/min︱feed speeds 20-10.000 mm/min︱ 26/26/20 m/min︱ 24-fach ︱spindle taper SK 40 ︱table surface area 1000x600 mm︱total power requirement 26 kW︱weight of the machine ca. 6.500 t︱dimensions of the machine ca. m︱
          Accessories: B-axe (Rotation of head), 24 Pos. ATC with 2 discs, electronic hand wheel, chip conveying worm and cooling arrangement. Machine has cooling through spindle. Control: Heidenhain 430
            x-travel 0630 mm
            y-travel 560 mm
            z-travel 560 mm
            turning speeds 12.000 U/min
            feed speeds 20-10.000 mm/min
            26/26/20 m/min
            24-fach
            spindle taper SK 40
            table surface area 1000x600 mm
            total power requirement 26 kW
            weight of the machine ca. 6.500 t
            Description :
            Accessories: B-axe (Rotation of head), 24 Pos. ATC with 2 discs, electronic
            hand wheel, chip conveying worm and cooling arrangement. Machine has cooling
            through spindle. Control: Heidenhain 430
          Datasheet
          Request / Contact

          Machining Center - Vertical

          used Metal Processing Machining Center - Vertical MAZAK VTC 20 B


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-10172 · Machining Center - Vertical

          MAZAK - VTC 20 B - - 1999 - Mazatrol M 32 B

          Technical details
          x-travel 1120 mm︱y-travel 510 mm︱z-travel 510 mm︱Control Mazatrol M 32 B ︱table-size 1460 x 510 mm︱feeds 1- 20000 mm/min︱rapid traverse 24/24/20 m/min︱spindle turning speed - stepless 40- 7000 U/min︱spindle taper ISO 40 ︱tool change unit 24 Pos.︱total power requirement 20 KVA︱weight of the machine ca. 5,85 t︱dimensions of the machine ca. 4,7 x 2,9 x 2,7 m︱
          Machine will be supplied with some tool holders and is ready for work. Machine comes with a chip conveyor.
            x-travel 1120 mm
            y-travel 510 mm
            z-travel 510 mm
            Control Mazatrol M 32 B
            table-size 1460 x 510 mm
            feeds 1- 20000 mm/min
            rapid traverse 24/24/20 m/min
            spindle turning speed - stepless 40- 7000 U/min
            spindle taper ISO 40
            tool change unit 24 Pos.
            total power requirement 20 KVA
            weight of the machine ca. 5,85 t
            dimensions of the machine ca. 4,7 x 2,9 x 2,7 m
            Description :
            Machine will be supplied with some tool holders and is ready for work. Machine
            comes with a chip conveyor.
          Datasheet
          Request / Contact
          used Metal Processing Machining Center - Vertical CHIRON FZ 12 S


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-10173 · Machining Center - Vertical

          CHIRON - FZ 12 S - - 1993 - Fanuc 0 M

          Technical details
          x-travel 0550 mm︱y-travel 300 mm︱z-travel 280 mm︱control Fanuc 0 M ︱table-size 950 x 660 mm︱spindle diameter 65 mm︱tool taper SK 30 ︱spindle turning speed - stepless 20 - 7100 U/min︱feeds 1- 20000 mm/min︱rapid traverse 20000 mm/min︱electrics - voltage/frequency 380 / 50 V/Hz︱spindle drive 5,5 kW︱weight of the machine ca. 3 t︱
          Control: Fanuc 0 M. Machine has a fourth axe as a horizontal dividing head.
            x-travel 0550 mm
            y-travel 300 mm
            z-travel 280 mm
            control Fanuc 0 M
            table-size 950 x 660 mm
            spindle diameter 65 mm
            tool taper SK 30
            spindle turning speed - stepless 20 - 7100 U/min
            feeds 1- 20000 mm/min
            rapid traverse 20000 mm/min
            electrics - voltage/frequency 380 / 50 V/Hz
            spindle drive 5,5 kW
            weight of the machine ca. 3 t
            Description :
            Control: Fanuc 0 M. Machine has a fourth axe as a horizontal dividing head.

          Datasheet
          Request / Contact

          Milling Machining Centers 5 Axis

          used Metal Processing Milling Machining Centers 5 Axis HUBER + GRIMME HG3000T


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-26744 · Milling Machining Centers 5 Axis

          HUBER + GRIMME - HG3000T - - 1996 - NUM

          Technical details
          x-travel 3000 mm︱y-travel 2500 mm︱z-travel 400 mm︱Control NUM ︱c-axis 0-360 °︱b-axis 0-360 °︱spindle turning speed range 0- 30000 U/min︱rapid traverse 50 m/min︱total power requirement 12 kW︱weight of the machine ca. 4 t︱dimensions of the machine ca. 4 x 3 x 2 m︱
          5 axes machining center to work on wood or plastic. Machine has two tables and 6 position tool changer (ATC) at each table.
            x-travel 3000 mm
            y-travel 2500 mm
            z-travel 400 mm
            Control NUM
            c-axis 0-360 °
            b-axis 0-360 °
            spindle turning speed range 0- 30000 U/min
            rapid traverse 50 m/min
            total power requirement 12 kW
            weight of the machine ca. 4 t
            dimensions of the machine ca. 4 x 3 x 2 m
            Description :
            5 axes machining center to work on wood or plastic. Machine has two tables and
            6 position tool changer (ATC) at each table.
          Datasheet
          Request / Contact
          used Metal Processing Milling Machining Centers 5 Axis HUBER + GRIMME HG 1400


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-26745 · Milling Machining Centers 5 Axis

          HUBER + GRIMME - HG 1400 - - 1995 - H+G

          Technical details
          x-travel 1400 mm︱y-travel 1000 mm︱z-travel 300 mm︱Control H+G ︱c-axis 0-360 °︱b-axis 0-360 °︱spindle turning speed range 0- 30000 U/min︱rapid traverse 50 m/min︱total power requirement 6 kW︱weight of the machine ca. 2 t︱dimensions of the machine ca. 3 x 2 x 3 m︱
          5 axes machining center to work on wood or plastic. CNC CONTROL OF THAT MACHINE IS DEFECT AND HAS TO BE REPAIRED BY THE BUYER ! MACHINE COULD BE USED FOR SPARE PART SUPPLY !
            x-travel 1400 mm
            y-travel 1000 mm
            z-travel 300 mm
            Control H+G
            c-axis 0-360 °
            b-axis 0-360 °
            spindle turning speed range 0- 30000 U/min
            rapid traverse 50 m/min
            total power requirement 6 kW
            weight of the machine ca. 2 t
            dimensions of the machine ca. 3 x 2 x 3 m
            Description :
            5 axes machining center to work on wood or plastic. CNC CONTROL OF THAT MACHINE
            IS DEFECT AND HAS TO BE REPAIRED BY THE BUYER ! MACHINE COULD BE USED FOR SPARE
            PART SUPPLY !
          Datasheet
          Request / Contact

          Pillar Drilling Machine

          used Metal Processing Pillar Drilling Machine ABOGA A 4008


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-50021 · Pillar Drilling Machine

          ABOGA - A 4008 - - 2000 -

          Technical details
          bore capacity in steel (diameter) 35 mm︱throat 330 mm︱bore stroke 200 mm︱bore capacity in cast iron 40 mm︱spindle cone MT 4 ︱spindle turning speed range 30- 1500 U/min︱table-size 400 x 330 mm︱T-slot - width 15 mm︱distance spindle /table 0- 1000 mm︱column diameter 200 mm︱feeds 0,10/0,16/0,24/0,33 mm/U︱total power requirement 1,5 kW︱weight of the machine ca. 320 kg︱dimensions of the machine ca. 1 x 1 x 1,9 m︱
            bore capacity in steel (diameter. 35 mm
            throat 330 mm
            bore stroke 200 mm
            bore capacity in cast iron 40 mm
            spindle cone MT 4
            spindle turning speed range 30- 1500 U/min
            table-size 400 x 330 mm
            T-slot - width 15 mm
            distance spindle /table 0- 1000 mm
            column diameter 200 mm
            feeds 0,10/0,16/0,24/0,33 mm/U
            total power requirement 1,5 kW
            weight of the machine ca. 320 kg
            dimensions of the machine ca. 1 x 1 x 1,9 m
          Datasheet
          Request / Contact

          Radial Drilling Machine

          used Metal Processing Radial Drilling Machine STANKOIMPORT 2 A 554


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-60097 · Radial Drilling Machine

          STANKOIMPORT - 2 A 554 - - 1990 -

          Technical details
          drilling capacity steel/cast iron 50,60 mm︱throat max. 1600 mm︱spindle taper: MK 5 ︱throat min. 365 mm︱drilling depth in one stroke 400 mm︱vertical adjustment of arm 750 mm︱base plate surface area 1800 x 1000 mm︱spindle turning speed range 18 - 2000 U/min︱feeds 0,056 - 0,56 mm/U︱total power requirement 4 kW︱weight of the machine ca. 4,7 t︱
          With table.
            drilling capacity steel/cast iro. 50,60 mm
            throat max. 1600 mm
            spindle taper: MK 5
            throat min. 365 mm
            drilling depth in one stroke 400 mm
            vertical adjustment of arm 750 mm
            base plate surface area 1800 x 1000 mm
            spindle turning speed range 18 - 2000 U/min
            feeds 0,056 - 0,56 mm/U
            total power requirement 4 kW
            weight of the machine ca. 4,7 t
            Description :
            With table.
          Datasheet
          Request / Contact

          Universal Milling Machine

          used Metal Processing Universal Milling Machine KNUTH UFM 3


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-1111172 · Universal Milling Machine

          KNUTH - UFM 3 - - 1995 -

          Technical details
          x-travel 785 mm︱y-travel 250 mm︱z-travel 410 mm︱table-size 1120 x 250 mm︱spindle taper SK 50 ︱spindle turning speed range 40- 2000 U/min︱turning speeds: 18 ︱total power requirement 5,5 kW︱weight of the machine ca. 2,3 t︱dimensions of the machine ca. 1,5 x 1,7 x 1,65 m︱
            x-travel 785 mm
            y-travel 250 mm
            z-travel 410 mm
            table-size 1120 x 250 mm
            spindle taper SK 50
            spindle turning speed range 40- 2000 U/min
            turning speeds: 18
            total power requirement 5,5 kW
            weight of the machine ca. 2,3 t
            dimensions of the machine ca. 1,5 x 1,7 x 1,65 m
          Datasheet
          Request / Contact

          Gear Hobbing Machine - Vertical

          used Metal Processing Gear Hobbing Machine - Vertical TOS FO16


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-1765 · Gear Hobbing Machine - Vertical

          TOS - FO16 - - 1979 -

          Technical details
          max. wheel diameter 1600 mm︱gear width 560 mm︱max. module 16 ︱min. module 4 ︱table dia. 1350 mm︱table load capacity 7000 kg︱weight of the machine ca. 18 t︱dimensions of the machine ca. 4 x 2,5 x 2,5 m︱
          With Tengential head With change gears Without steady.
            max. wheel diameter 1600 mm
            gear width 560 mm
            max. module 16
            min. module 4
            table dia. 1350 mm
            table load capacity 7000 kg
            weight of the machine ca. 18 t
            dimensions of the machine ca. 4 x 2,5 x 2,5 m
            Description :
            With Tengential head
            With change gears
            Without steady.
          Datasheet
          Request / Contact
          used Metal Processing Gear Hobbing Machine - Vertical LIEBHERR ET 1500


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-1762 · Gear Hobbing Machine - Vertical

          LIEBHERR - ET 1500 - - 1973 -

          Technical details
          max. wheel diameter 1500 mm︱gear width 280 mm︱max. module 14 ︱min. module 1 ︱table diameter 1400 mm︱total power requirement 86 kW︱weight of the machine ca. 23 t︱dimensions of the machine ca. 4 x 2,4 x 2,4 m︱
          Internal gear gasher for single teeth cutting. Machine was completly reconditioned in 2007 ! Machine comes along with a sound protection cabine, chnage gears and other equipment.
            max. wheel diameter 1500 mm
            gear width 280 mm
            max. module 14
            min. module 1
            table diameter 1400 mm
            total power requirement 86 kW
            weight of the machine ca. 23 t
            dimensions of the machine ca. 4 x 2,4 x 2,4 m
            Description :
            Internal gear gasher for single teeth cutting.
            Machine was completly reconditioned in 2007 !
            Machine comes along with a sound protection cabine, chnage gears and other
            equipment.
          Datasheet
          Request / Contact

          Gear Shaping Machine

          used Metal Processing Gear Shaping Machine TOS OH 6


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-1766 · Gear Shaping Machine

          TOS - OH 6 - - 1979 -

          Technical details
          max. wheel diameter 0500 mm︱gear width 125 mm︱max. module 6 ︱min. module 1 ︱total power requirement 4 kW︱weight of the machine ca. 3,6 t︱dimensions of the machine ca. 2,1 x 1,2 x 2,1 m︱
          With change gears.
            max. wheel diameter 0500 mm
            gear width 125 mm
            max. module 6
            min. module 1
            total power requirement 4 kW
            weight of the machine ca. 3,6 t
            dimensions of the machine ca. 2,1 x 1,2 x 2,1 m
            Description :
            With change gears.
          Datasheet
          Request / Contact

          Cylindrical Grinding Machine

          used Metal Processing Cylindrical Grinding Machine FORTUNA F 11 S 500


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-12014 · Cylindrical Grinding Machine

          FORTUNA - F 11 S 500 - - 1978 -

          Technical details
          grinding diameter 0200 mm︱grinding length 500 mm︱centre height 120 mm︱grinding wheel speed 15 m/sec︱swing dia. 260 mm︱total power requirement 5,5 kW︱weight of the machine ca. 2,8 t︱dimensions of the machine ca. 3 x 2 x 1,5 m︱table speeds 0- 8 m/min︱angle of table min./max. 5/12 Grad︱grinding slide stroke 150 mm︱grinding slide swivable +/- 45 °︱workpiece swivable +/- 45 °︱grinding wheel size 400 x 40 mm︱workpiece turning speeds 30- 800 U/min︱max. workpiece weight -without tailstock 15 kg︱voltage 400 V︱
          Machine has a Finibalanx balancing arrangement and a Marposs measuring unit with sensor.
            grinding diameter 0200 mm
            grinding length 500 mm
            centre height 120 mm
            grinding wheel speed 15 m/sec
            swing dia. 260 mm
            total power requirement 5,5 kW
            weight of the machine ca. 2,8 t
            dimensions of the machine ca. 3 x 2 x 1,5 m
            table speeds 0- 8 m/min
            angle of table min./max. 5/12 Grad
            grinding slide stroke 150 mm
            grinding slide swivable +/- 45 °
            workpiece swivable +/- 45 °
            grinding wheel size 400 x 40 mm
            workpiece turning speeds 30- 800 U/min
            max. workpiece weight -without t. 15 kg
            voltage 400 V
            Description :
            Machine has a Finibalanx balancing arrangement and a Marposs measuring unit
            with sensor.
          Datasheet
          Request / Contact
          used Metal Processing Cylindrical Grinding Machine KARSTENS ASA 16 A


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-12064 · Cylindrical Grinding Machine

          KARSTENS - ASA 16 A - - 1970 -

          Technical details
          grinding diameter 0250 mm︱grinding length 750 mm︱centre height 125 mm︱total power requirement 4 kW︱weight of the machine ca. 2,5 t︱dimensions of the machine ca. 2,5 x 1,5 x 1,6 m︱table speeds 0,05 - 5 m/min︱angle of table min./max. 9,5 Grad︱grinding slide stroke 280 mm︱grinding slide swivable +/- 180 °︱workpiece swivable +/- 90 °︱grinding wheel size 400x40x127 mm︱workpiece turning speeds 30 - 450 U/min︱max. workpiece weight -without tailstock 70 kg︱voltage 380 V︱
          Machine was completely reconditioned in 2009.
            grinding diameter 0250 mm
            grinding length 750 mm
            centre height 125 mm
            total power requirement 4 kW
            weight of the machine ca. 2,5 t
            dimensions of the machine ca. 2,5 x 1,5 x 1,6 m
            table speeds 0,05 - 5 m/min
            angle of table min./max. 9,5 Grad
            grinding slide stroke 280 mm
            grinding slide swivable +/- 180 °
            workpiece swivable +/- 90 °
            grinding wheel size 400x40x127 mm
            workpiece turning speeds 30 - 450 U/min
            max. workpiece weight -without t. 70 kg
            voltage 380 V
            Description :
            Machine was completely reconditioned in 2009.
          Datasheet
          Request / Contact

          Internal Grinding Machine

          used Metal Processing Internal Grinding Machine VOUMARD 203


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-12012 · Internal Grinding Machine

          VOUMARD - 203 - - 1985 -

          Technical details
          internal diameter 1- 100 mm︱grinding depth 120 mm︱swing diameter 250 mm︱centre height 175 mm︱workpiece length - max. 500 mm︱grinding table stroke min./max.: 2- 300 mm︱table speed -stepless- 0- 20 m/min︱grinding spindle speed 3500- 63000 U/min︱work piece spindle speed (6) 125- 1000 U/min︱workpiece spindle swivable +/- -30/+90 °︱total power requirement 7,5 kW︱weight of the machine ca. 3 t︱dimensions of the machine ca. 2,6 x 1,7 x 2,0 m︱
            internal diameter 1- 100 mm
            grinding depth 120 mm
            swing diameter 250 mm
            centre height 175 mm
            workpiece length - max. 500 mm
            grinding table stroke min./max.: 2- 300 mm
            table speed -stepless- 0- 20 m/min
            grinding spindle speed 3500- 63000 U/min
            work piece spindle speed (6) 125- 1000 U/min
            workpiece spindle swivable +/- -30/+90 °
            total power requirement 7,5 kW
            weight of the machine ca. 3 t
            dimensions of the machine ca. 2,6 x 1,7 x 2,0 m
            Description :

          Datasheet
          Request / Contact
          used Metal Processing Internal Grinding Machine VOUMARD 5 A


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-1228 · Internal Grinding Machine

          VOUMARD - 5 A - - 1975 -

          Technical details
          internal diameter 5 - 200 mm︱grinding depth 250 mm︱swing diameter 330 mm︱centre height 180 mm︱workpiece length - max. 500 mm︱grinding table stroke min./max.: 3 / 600 mm︱table speed -stepless- 0 - 10 m/min︱grinding spindle speed 3600 - 40000 U/min︱work piece spindle speed (6) 65 - 600 U/min︱workpiece spindle swivable +/- 90 °︱total power requirement 7,5 kW︱weight of the machine ca. 2,9 / 0,7 t︱dimensions of the machine ca. 2.80 x 1.35 x 1.90 m︱
            internal diameter 5 - 200 mm
            grinding depth 250 mm
            swing diameter 330 mm
            centre height 180 mm
            workpiece length - max. 500 mm
            grinding table stroke min./max.: 3 / 600 mm
            table speed -stepless- 0 - 10 m/min
            grinding spindle speed 3600 - 40000 U/min
            work piece spindle speed (6) 65 - 600 U/min
            workpiece spindle swivable +/- 90 °
            total power requirement 7,5 kW
            weight of the machine ca. 2,9 / 0,7 t
            dimensions of the machine ca. 2.80 x 1.35 x 1.90 m
            Description :

          Datasheet
          Request / Contact

          Rotary Table Hole Grinding Machine

          used Metal Processing Rotary Table Hole Grinding Machine SIELEMANN RB 160


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-1265 · Rotary Table Hole Grinding Machine

          SIELEMANN - RB 160 - - 1977 -

          Technical details
          rotary table diameter 1600 mm︱boring diameter 150-1500 mm︱drilling depth 600 mm︱grinding height 600 mm︱grinding head - power requirement 25 kW︱swing diameter 1900 mm︱table load 8 t︱total power requirement 45 kW︱weight of the machine ca. 36 t︱dimensions of the machine ca. 7 x 3,8 x 5 m︱
          Digital readout, two grinding spindles.
            rotary table diameter 1600 mm
            boring diameter 150-1500 mm
            drilling depth 600 mm
            grinding height 600 mm
            grinding head - power requiremen. 25 kW
            swing diameter 1900 mm
            table load 8 t
            total power requirement 45 kW
            weight of the machine ca. 36 t
            dimensions of the machine ca. 7 x 3,8 x 5 m
            Description :
            Digital readout, two grinding spindles.
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          •   
          •   

            Trader Profile:   Karl Günter Wirths GmbH

          Contact Trader



            Karl Günter Wirths GmbH
           Scharpenberger Strasse 96-98
            58256 Ennepetal
            Deutschland
            02333-79050">02333-79050
            02333-790555
            sales@wirths.net
            www.wirths.net

          Profile of Trader

          About us - Wirths GmbH in Ennepetal

          wirths gmbh.Karl G. Wirths founded the company in 1956 as a mechanical workshop. 1961 he developed a die shop for pressing and forming dies. In that time 30 employees were working as die makers in the work shop.
           
          Parallel Karl G. Wirths started a shop for refurbishment of machine tools. That was also the start for the machine tool business.

          The die shop was closed 1972 but the machine tool business was developed.

          In 1972 the first stock was erected. Up to now buildings with up to 50 t crane capacity.

          In that stock we always keep approx. 250 machines.

          We are not focused on a one time business but on a long term business relative with our domestic customers and customers from all places around the world.

          Contact us

          Wirths GmbHKarl Günter Wirths GmbH
          Scharpenberger Str. 96-98
          D-58256 Ennepetal / Germany





          The right used metal processing machines at LagerMaschinen.de
          Used metal processing machines for every occasion

          Metalworking comprises a variety of applications involving the manipulation of metal from large-scale production of metals including lathing milling and cutting to smaller operations such as jewellery working. No matter the application used metal processing machines present an ideal way of obtaining the equipment you need at a price you can afford. Used metal processing machines such as milling machines can be manually operated or using computer numeric control which increases the overall precision of the machine. The type of used metal processing machines you need depends on the applications you use but at LagerMaschinen.de you are sure to find what you’re looking for.

          The right machine for every field of application

          Used metal processing machines can be used in several fields. Companies active in the computer industry can obtain used metal processing machines for circuit board soldering and companies that need to bond different pieces can find the welding machines that they need. If your company is in the business of making the precision parts needed to make other precision machines then used grinding machines can be a great way to expand or refurbish your production lines. Used metal processing machines can also be found for lathing drilling milling and several other uses.

          Used equipment from LagerMaschinen.de

          No matter the type of equipment you will find the used metal processing machines you need at LagerMaschinen.de. With its international network of suppliers this platform can provide you with the used metal processing machines you need at a price you can afford.

          Karl Günter Wirths GmbH   58256 Ennepetal Scharpenberger Strasse 96-98 Deutschland
          Karl Günter Wirths GmbH

          Scharpenberger Strasse 96-98



          Contact Trader


            Karl Günter Wirths GmbH
           Scharpenberger Strasse 96-98
            58256 Ennepetal
            Deutschland
            02333-79050
            02333-790555
            sales@wirths.net
            www.wirths.net
            Contact person:

           
          ACHTUNG: NEUE FAX Nr. 02333 790555




          Machine category


          Abkantpresse - hydraulisch · Anreißplatte · Aufspannplatte · Bandschleifmaschine · Bandsäge - horizontal · Bandsäge - Vertikal · Bearbeitungszentrum 5 Achs · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · Bohrwerkstisch · Bügelsäge · Bügelsäge - Automatisch · CNC Drehmaschine · Doppelständerpresse - Hydraulisch · Doppelständerziehpresse - Hydraulisch · Drehmaschine - zyklengesteuert · Dreiwalzen - Blechbiegemaschine · Einständerexzenterpresse · Einständerpresse - Hydraulisch · Endenbearbeitungsmaschine · Flachschleifmaschine - Horizontal · Fräsmaschine - Universal · Gabelstapler · Handhebel-Schere · Innenschleifmaschine · Karusselldrehmaschine - Einständer · Kreissäge - Automatisch · Mechanikerdrehbank · Messmaschine · Plan- und Spitzendrehbank · Plattenfeld · Pneumatische Presse · Profil- Ring- Biegemaschine · Querteilanlage · Radialbohrmaschine · Richtmaschine · Richtplatte · Richtpresse - Einständer · Rohrbiegemaschine · Rundschleifmaschine · Rundtisch-Bohrungs-Schleifmaschine · Schleifbock · Schwenkbiegemaschine · Senkerodiermaschine · Spindelpresse · Spitzendrehmaschine · Stangenzuführung · Stanzautomat-Doppelständer · Säulenbohrmaschine · Tafelschere - hydraulisch · Werkzeug Voreinstellgerät · Zahnrad-Abwälzfräsmaschine - vertikal · Zahnradstossmaschine ·