European network of stockholding machinery dealers

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:

          Engelfried Maschinentechnik GmbH - Stockist for used machines

          Machinelist:


          Band saw

          used  Band saw PANHANS BSB 500


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-5327 · Band saw

          PANHANS - BSB 500 - - neu -

          Technical details
          Wheel diameter 500 mm︱Cutting height 330 mm︱cutting width 480 mm︱Motor output 1,5 kW︱Table dimensions 495 x 670 mm︱Table tiltable 45 Grad︱
            Wheel diameter 500 mm
            Cutting height 330 mm
            cutting width 480 mm
            Motor output 1,5 kW
            Table dimensions 495 x 670 mm
            Table tiltable 45 Grad
          Datasheet
          Request / Contact
          used  Band saw PANHANS BSB 600


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6225 · Band saw

          PANHANS - BSB 600 - - neu -

          Technical details
          Wheel diameter 600 mm︱Cutting height 380 mm︱cutting width 570 mm︱Motor output 2,2 kW︱Table dimensions 810 x 590 mm︱table height 905 mm︱voltage 400 V / 50 Hz ︱range L-W-H 1120 x 750 x 2125 mm︱Weight 275 kg︱Dust suction hood 2 x 100 mm︱band speed 1550 m/min︱
            Wheel diameter 600 mm
            Cutting height 380 mm
            cutting width 570 mm
            Motor output 2,2 kW
            Table dimensions 810 x 590 mm
            table height 905 mm
            voltage 400 V / 50 Hz
            range L-W-H 1120 x 750 x 2125 mm
            Weight 275 kg
            Dust suction hood 2 x 100 mm
            band speed 1550 m/min
          Datasheet
          Request / Contact
          used  Band saw PANHANS BSB 700


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6195 · Band saw

          PANHANS - BSB 700 - - neu -

          Technical details
          Wheel diameter 700 mm︱Cutting height 420 mm︱cutting width 680 mm︱Table dimensions 695 x 990 mm︱Table tiltable 45 Grad︱Dimensions (L/W/H) 1260x840x2270 mm︱machine weight ab. 400 kg︱band speed 1570 m/min︱
          Band saw machine Panhans BSB 700 - Machine stand in a shapely, modern, torsion-free double chamber welded steel construction - Upper and lower door secured by limit switches - upper and lower Panhans band saw blade guide APA II, size. 2- finely planed cast iron table - table top can be swiveled up to 45° - dynamic balanced band saw wheels with vulcanized rubber bandages - Stop ruler can be used to the left of the saw blade, stop profile can be folded over - Blade tension indicator - 1 saw blade 5140 x 25 x 0.7 mm, tooth width 9 mm - mechanical height adjustment of the saw blade guard by hand wheel with locking pinion - Rotary cam switch with star-delta start and emergency stop button Automatic motor brake with main switch and motor protection switch - Wheel diameter: 700mm - Tape speed: 1570 m/min - Voltage: 400 V / 50 Hz - Wheel speed: 715 rpm - Cutting height: 420 mm - Cutting width: 680 mm - Max blade length: 5140 mm - Table size: 990 x 695 mm - Table height: 920 mm - Extraction connection: 2 x 120 mm - Required space: 1260 x 840 x 2270 mm - Weight: 400kg (Technical information according to the manufacturer - without guarantee!)
            Wheel diameter 700 mm
            Cutting height 420 mm
            cutting width 680 mm
            Table dimensions 695 x 990 mm
            Table tiltable 45 Grad
            Dimensions (L/W/H) 1260x840x2270 mm
            machine weight ab. 400 kg
            band speed 1570 m/min
            Description :
            Band saw machine Panhans BSB 700

            - Machine stand in a shapely, modern, torsion-free double chamber
            welded steel construction

            - Upper and lower door secured by limit switches

            - upper and lower Panhans band saw blade guide APA II, size. 2- finely planed
            cast iron table

            - table top can be swiveled up to 45°

            - dynamic balanced band saw wheels with vulcanized rubber bandages

            - Stop ruler can be used to the left of the saw blade, stop profile can be
            folded over

            - Blade tension indicator

            - 1 saw blade 5140 x 25 x 0.7 mm, tooth width 9 mm

            - mechanical height adjustment of the saw blade guard by hand wheel with
            locking pinion

            - Rotary cam switch with star-delta start and emergency stop button
            Automatic motor brake with main switch and motor protection switch

            - Wheel diameter: 700mm

            - Tape speed: 1570 m/min

            - Voltage: 400 V / 50 Hz - Wheel speed: 715 rpm

            - Cutting height: 420 mm

            - Cutting width: 680 mm

            - Max blade length: 5140 mm

            - Table size: 990 x 695 mm

            - Table height: 920 mm

            - Extraction connection: 2 x 120 mm

            - Required space: 1260 x 840 x 2270 mm

            - Weight: 400kg


            (Technical information according to the manufacturer - without guarantee!)
          Datasheet
          Request / Contact

          Jointing and Fine-cut Machine

          used  Jointing and Fine-cut Machine SCHEER FM-8


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6829 · Jointing and Fine-cut Machine

          SCHEER - FM-8 - - gebraucht -

          Technical details
          Cutting length 3100 mm︱Cutting height 45 mm︱Motor output 1,8 kW︱Dimensions (L/W/H) 3950 x 470 x 920 mm︱machine weight ab. 400 kg︱
          Scheer joining and fine cutting machine FM-8 3100mm with rear support table ------------------------- (technical data according to manufacturer - no guarantee!)
            Cutting length 3100 mm
            Cutting height 45 mm
            Motor output 1,8 kW
            Dimensions (L/W/H) 3950 x 470 x 920 mm
            machine weight ab. 400 kg
            Description :
            Scheer joining and fine cutting machine FM-8 3100mm
            with rear support table
            -------------------------
            (technical data according to manufacturer - no guarantee!)
          500 €
          Datasheet
          Request / Contact

          Mitre saw

          used  Mitre saw GRAULE ZS 135


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-5051 · Mitre saw

          GRAULE - ZS 135 - - neu -

          Technical details
          cutting width 430 mm︱Cutting height 135 mm︱Motor output 2 kW︱Dimensions (L/W/H) 1100x700x800 mm︱machine weight ab. 110 kg︱
          # 5051 Graule Crosscut Saw ZS 135, new -------------------------------------------------- ----------------------------------------------- - Crosscut and miter saw with a maximum cutting height of 135 mm - Sturdy cast iron - Precise ball bearing guide of the tool carriage on hardened and ground steel shafts - Manual feed - Rapid miter setting up to 65 ° - Re-adjustable positive stops - Lower blade guard can be connected to suction Technical specifications: --------------------------------- - Motor: 400 V / 2.0 kW - Speed: 3800 U / min - Cutting length: 440 mm (at 90 °) - Cutting height: 135 mm (at 90 °) - Miter horiz .: 45 ° -90 ° -25 ° - Saw blade Ø 350 mm - Suction 100 mm - 110 kg Crosscut and miter saws Accessories for -------------------------------------------------- ------------------------------------- All Crosscut and miter saws are in the basic equipment without blade Hydraulic feed brake (for type ZS 85 N to ZS 170 N) Price on request! Hydraulic feed brake (for type ZS 200 and ZS 200 N) Price on request! Pneumatic Sägeblattsprüheinrichtung Price on request! Pneumatic material clamping left side for types ZS 85 Price on request! Pneumatic material clamping on both sides of the top for the types ZS 135 ZS 200 N up Price on request! Pneumatic maintenance unit, consisting of water, pressure reducing valve with pressure gauge and lubricator Price on request! Pressure reducing valve with manometer Price on request! Remodeling the crosscut saw type ZS 85 for electrical installation on type ZS 85 E, suitable for cutting cable channels, sectional area at 45 ° inclined: 72 mm x 380 mm Price on request! Pole-changing motor 400 volts, n = 1350/2750 rev / min for type ZS 85 E, for cutting thin sheet steel channels Price on request! Machine stand for the types ZS 85 N, NS ZS 85, ZS 85 NS-SW, IS 135 and IS 170 Price on request! Machine stand for the types ZS 135 N and ZS 170 N Price on request! Portable machine substructure with 1.5 mtr. Roller conveyors on each side, left with Scale and stop slide (for types ZS 85 N to ZS 170 N) Price on request! 3 kW three-phase brake motor 380-400 volts (only types ZS 135 ZS to 170 N) Price on request! Cross ruler to cut acute angles (not type ZS 85) Price on request! Machine via handwheel on both sides tiltable, left to 45 ° right up to 60 °, 90 ° from the middle of (type ZS 170 N) Price on request! Holding device for angular aperture in Rolladenbau (only types ZS 135 ZS to 200 N) Price on request! Remodeling the crosscut saw type ZS 200 Saw blade diameter 550 mm, cutting height 215 mm for the Rolladenbau Price on request! Digital angle display for horizontal angle adjustment Price on request! Digital angle indicator for horizontal and vertical angle adjustment (both sides tiltable only in conjunction with machine) Price on request! Laser device, laser beam of about 300 mm line length Price on request! Hydropneumatic feed unit with two-hand safety control (only for the application of aluminum machining) Price on request! Motorized miter for horizontal and vertical angle adjustment with nominal / actual display Price on request! Motorized miter for horizontal angle adjustment with nominal / actual display Price on request! Motorized miter for vertical angle adjustment with nominal / actual display Price on request! Chip bag with zipper for emptying (Machine type) Price on request! Suction mobile with 2.5 mtr. Hose, 400 V (not allowed in the commercial sector for wood dust) Price on request! Suction mobile with 2.5 mtr. Hose, 400 V clean air system with Approval "H2" Price on request! Automatic switch for machine with suction system Price on request! Special cutting lengths up to approx 600 mm on request Blades: --------------------- HM circular saw blade for wood 300 x 3,2 x 40 mm 72 WZ neg Price on request! HM circular saw blade for aluminum and plastics 300 x 3,3 x 40 mm 96 FTZ neg Price on request! HM circular saw blade for thin-walled steel profiles 305 x 2,2 x 40 mm 80 FTZ neg (short service life) Price on request! HM circular saw blade for wood 350 x 4,0 x 40 mm 42 WZ neg Price on request! HM circular saw blade for wood 350 x 3,2 x 40 mm 72 WZ neg Price on request! HM circular saw blade for aluminum and plastics 350 x 3.5 x 40 mm 108 FTZ neg Price on request! HM circular saw blade for wood 420 x 4,0 x 40 mm 48 WZ neg Price on request! HM circular saw blade for wood 420x3,5x40 mm 84 WZ neg Price on request! HM circular saw blade for aluminum and plastics 420 x 3.8 x 40 mm 108 FTZ neg Price on request! HM circular saw blade for wood 520 x 4,4 x 50 mm 60 WZ neg Price on request! HM circular saw blade for aluminum and plastics 520 x 4.4 x 50 mm 120 FTZ neg Price on request! HM circular saw blade for aluminum and plastics 550 x 4,0 x 50 mm 180 FTZ neg Price on request! techn. Details according to manufacturer - ohn guarantee! All genes mentioned here prices are excl. Of VAT currently valid. (Domestic)
            cutting width 430 mm
            Cutting height 135 mm
            Motor output 2 kW
            Dimensions (L/W/H) 1100x700x800 mm
            machine weight ab. 110 kg
            Description :
            # 5051 Graule Crosscut Saw ZS 135, new
            --------------------------------------------------
            -----------------------------------------------

            - Crosscut and miter saw with a maximum cutting height of 135 mm
            - Sturdy cast iron
            - Precise ball bearing guide of the tool carriage on hardened and ground steel
            shafts
            - Manual feed
            - Rapid miter setting up to 65 °
            - Re-adjustable positive stops
            - Lower blade guard can be connected to suction

            Technical specifications:
            ---------------------------------

            - Motor: 400 V / 2.0 kW
            - Speed: 3800 U / min
            - Cutting length: 440 mm (at 90 °)
            - Cutting height: 135 mm (at 90 °)
            - Miter horiz .: 45 ° -90 ° -25 °
            - Saw blade Ø 350 mm
            - Suction 100 mm
            - 110 kg

            Crosscut and miter saws Accessories for
            --------------------------------------------------
            -------------------------------------
            All Crosscut and miter saws are in the basic equipment without blade

            Hydraulic feed brake (for type ZS 85 N to ZS 170 N)
            Price on request!

            Hydraulic feed brake (for type ZS 200 and ZS 200 N)
            Price on request!

            Pneumatic Sägeblattsprüheinrichtung
            Price on request!

            Pneumatic material clamping left side for types ZS 85
            Price on request!

            Pneumatic material clamping on both sides of the top for the types ZS 135 ZS
            200 N up
            Price on request!

            Pneumatic maintenance unit, consisting of water, pressure reducing valve with
            pressure gauge and lubricator
            Price on request!

            Pressure reducing valve with manometer
            Price on request!

            Remodeling the crosscut saw type ZS 85 for electrical installation on type ZS
            85 E,
            suitable for cutting cable channels, sectional area at 45 ° inclined: 72 mm x
            380 mm
            Price on request!

            Pole-changing motor 400 volts, n = 1350/2750 rev / min for type ZS 85 E, for
            cutting thin sheet steel channels
            Price on request!

            Machine stand for the types ZS 85 N, NS ZS 85, ZS 85 NS-SW, IS 135 and IS 170
            Price on request!

            Machine stand for the types ZS 135 N and ZS 170 N
            Price on request!

            Portable machine substructure with 1.5 mtr. Roller conveyors on each side, left
            with
            Scale and stop slide (for types ZS 85 N to ZS 170 N)
            Price on request!

            3 kW three-phase brake motor 380-400 volts (only types ZS 135 ZS to 170 N)
            Price on request!

            Cross ruler to cut acute angles (not type ZS 85)
            Price on request!

            Machine via handwheel on both sides tiltable, left to 45 ° right up to 60 °, 90
            ° from the middle of (type ZS 170 N)
            Price on request!

            Holding device for angular aperture in Rolladenbau (only types ZS 135 ZS to 200
            N)
            Price on request!

            Remodeling the crosscut saw type ZS 200 Saw blade diameter 550 mm, cutting
            height 215 mm for the Rolladenbau
            Price on request!

            Digital angle display for horizontal angle adjustment
            Price on request!

            Digital angle indicator for horizontal and vertical angle adjustment (both
            sides tiltable only in conjunction with machine)
            Price on request!

            Laser device, laser beam of about 300 mm line length
            Price on request!

            Hydropneumatic feed unit with two-hand safety control (only for the application
            of aluminum machining)
            Price on request!

            Motorized miter for horizontal and vertical angle adjustment with nominal /
            actual display
            Price on request!

            Motorized miter for horizontal angle adjustment with nominal / actual display
            Price on request!

            Motorized miter for vertical angle adjustment with nominal / actual display
            Price on request!

            Chip bag with zipper for emptying (Machine type)
            Price on request!

            Suction mobile with 2.5 mtr. Hose, 400 V (not allowed in the commercial sector
            for wood dust)
            Price on request!

            Suction mobile with 2.5 mtr. Hose, 400 V clean air system with Approval "H2"
            Price on request!

            Automatic switch for machine with suction system
            Price on request!

            Special cutting lengths up to approx 600 mm on request


            Blades:
            ---------------------
            HM circular saw blade for wood 300 x 3,2 x 40 mm 72 WZ neg
            Price on request!

            HM circular saw blade for aluminum and plastics 300 x 3,3 x 40 mm 96 FTZ neg
            Price on request!

            HM circular saw blade for thin-walled steel profiles 305 x 2,2 x 40 mm 80 FTZ
            neg (short service life)
            Price on request!

            HM circular saw blade for wood 350 x 4,0 x 40 mm 42 WZ neg
            Price on request!

            HM circular saw blade for wood 350 x 3,2 x 40 mm 72 WZ neg
            Price on request!

            HM circular saw blade for aluminum and plastics 350 x 3.5 x 40 mm 108 FTZ neg
            Price on request!

            HM circular saw blade for wood 420 x 4,0 x 40 mm 48 WZ neg
            Price on request!

            HM circular saw blade for wood 420x3,5x40 mm 84 WZ neg
            Price on request!

            HM circular saw blade for aluminum and plastics 420 x 3.8 x 40 mm 108 FTZ neg
            Price on request!

            HM circular saw blade for wood 520 x 4,4 x 50 mm 60 WZ neg
            Price on request!

            HM circular saw blade for aluminum and plastics 520 x 4.4 x 50 mm 120 FTZ neg
            Price on request!

            HM circular saw blade for aluminum and plastics 550 x 4,0 x 50 mm 180 FTZ neg
            Price on request!

            techn. Details according to manufacturer - ohn guarantee!
            All genes mentioned here prices are excl. Of VAT currently valid. (Domestic)
          Datasheet
          Request / Contact
          used  Mitre saw GRAULE ZS 170 N


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-5052 · Mitre saw

          GRAULE - ZS 170 N - - neu -

          Technical details
          cutting width 420 mm︱Cutting height ja mm︱Motor output 2 kW︱Cutting height at 45° 115 mm︱Dimensions (L/W/H) 1100x700x800 mm︱machine weight ab. 150 kg︱
          # 5052 Graule cutting and miter saw ZS 170 N, new -------------------------------------------------- ------------------------------ ----------------- - Crosscut and miter saw with a maximum cutting height of 170 mm - Cast iron construction - Precise ball bearing guide of the tool carrier on hardened and grinded steel shafts - Manual feed - Rapid miter setting up to 65 ° horizontally and 45 ° vertically (up 60 ° ZS 200N) - Re-adjustable positive stops - Lower blade guard can be connected to suction Technical Specifications: --------------------------------- - Motor: 400 V / 2.0 kW - Speed: 3500 U / min - Cutting length: 430 mm (at 90 °) - Cutting height: 170 mm (at 90 °) - Miter horiz .: 45 ° -90 ° -25 ° - Miter verti .: 90 ° -45 ° (left) - Saw blade Ø 420 mm - Suction 100 mm - 120 kg Accessories for Crosscut and miter saws -------------------------------------------------- ------------------------------ ------- All Crosscut and miter saws are the basic equipment without Sawblade Hydraulic feed brake (for type ZS 85 N to ZS 170 N) Price On Request! Hydraulic feed brake (for type ZS 200 and ZS 200 N) Price On Request! Pneumatic Sägeblattsprüheinrichtung Price On Request! Pneumatic material clamping left side for types ZS 85 Price On Request! Pneumatic material clamping on both sides of the top for the types ZS 135 to ZS 200 N Price On Request! Pneumatic maintenance unit, consisting of water, Pressure reducing valve with pressure gauge and lubricator Price On Request! Pressure reducing valve with pressure gauge Price On Request! Remodeling the crosscut saw type ZS 85 for electrical installation on type ZS 85 E, suitable inclined to cut cable ducts Cutting Capacity at 45 °: 72 mm x 380 mm Price On Request! Pole-changing motor 400 volts, n = 1350/2750 rev / min for type ZS 85 E, for Cutting of thin-walled sheet steel channels Price On Request! Machine stand for the types ZS 85N, ZS 85 NS, ZS 85 NS-SW, ZS 135 and ZS 170 Price On Request! Machine stand for the types ZS 135 N and ZS 170 N Price On Request! Portable machine substructure with 1.5 mtr. Roller conveyors on each side, left Page Scale and stop slide (for types ZS 85 N to ZS 170 N) Price On Request! 3 kW three-phase brake motor 380-400 volts (only types ZS 135 ZS to 170 N) Price On Request! Cross ruler to cut acute angles (not type ZS 85) Price On Request! Machine via handwheel on both sides tiltable, left to 45 ° right up to 60 °, from mid 90 ° (only type ZS 170 N) Price On Request! Holding device for angular aperture in Rolladenbau (only types ZS 135 to ZS 200 N) Price On Request! Remodeling the crosscut saw type ZS 200 Saw blade diameter 550 mm, cutting height 215 mm for the Rolladenbau Price On Request! Digital angle display for horizontal angle adjustment Price On Request! Digital angle indicator for horizontal and vertical angle adjustment (only in conjunction with machine on both sides tiltable) Price On Request! Laser device, laser beam with about 300 mm line length Price On Request! Hydropneumatic feed unit with two-hand safety control (only for the application range of aluminum machining) Price On Request! Motorized miter for horizontal and vertical angle adjustment with target / actual display Price On Request! Motorized miter for horizontal angle adjustment with Target / actual display Price On Request! Motorized miter for vertical angle adjustment with Target / actual display Price On Request! Chip bag with zipper for emptying (Machine type) Price On Request! Suction mobile 2.5 mtr. Hose, 400 V (in the commercial sector Wood dust is not allowed) Price On Request! Suction mobile 2.5 mtr. Hose, 400 V system with clean air Approval "H2" Price On Request! Automatic switch for machine with suction system Price On Request! Special cutting lengths up to approx 600 mm on request Blades: --------------------- HM circular saw blade for wood 300 x 3,2 x 40 mm 72 WZ neg Price On Request! HM circular saw blade for aluminum and plastics 300 x 3,3 x 40 mm 96 FTZ neg Price On Request! HM circular saw blade for thin-walled steel profiles 305 x 2,2 x 40 mm 80 FTZ neg (short service life) Price On Request! HM circular saw blade for wood 350 x 4,0 x 40 mm 42 WZ neg Price On Request! HM circular saw blade for wood 350 x 3,2 x 40 mm 72 WZ neg Price On Request! HM circular saw blade for aluminum and plastics 350 x 3.5 x 40 mm 108 FTZ neg Price On Request! HM circular saw blade for wood 420 x 4,0 x 40 mm 48 WZ neg Price On Request! HM circular saw blade for wood 420x3,5x40 mm 84 WZ neg Price On Request! HM circular saw blade for aluminum and plastics 420 x 3.8 x 40 mm 108 FTZ neg Price On Request! HM circular saw blade for wood 520 x 4,4 x 50 mm 60 WZ neg Price On Request! HM circular saw blade for aluminum and plastics 520 x 4.4 x 50 mm 120 FTZ neg Price On Request! HM circular saw blade for aluminum and plastics 550 x 4,0 x 50 mm 180 FTZ neg Price On Request! techn. Details according to manufacturer - ohn guarantee! All genes mentioned here prices are excl. Of VAT currently valid. (Inland)
            cutting width 420 mm
            Cutting height ja mm
            Motor output 2 kW
            Cutting height at 45° 115 mm
            Dimensions (L/W/H) 1100x700x800 mm
            machine weight ab. 150 kg
            Description :
            # 5052 Graule cutting and miter saw ZS 170 N, new
            --------------------------------------------------
            ------------------------------
            -----------------

            - Crosscut and miter saw with a maximum cutting height of 170 mm
            - Cast iron construction
            - Precise ball bearing guide of the tool carrier on hardened and
            grinded steel shafts
            - Manual feed
            - Rapid miter setting up to 65 ° horizontally and 45 ° vertically (up
            60 ° ZS 200N)
            - Re-adjustable positive stops
            - Lower blade guard can be connected to suction

            Technical Specifications:
            ---------------------------------

            - Motor: 400 V / 2.0 kW
            - Speed: 3500 U / min
            - Cutting length: 430 mm (at 90 °)
            - Cutting height: 170 mm (at 90 °)
            - Miter horiz .: 45 ° -90 ° -25 °
            - Miter verti .: 90 ° -45 ° (left)
            - Saw blade Ø 420 mm
            - Suction 100 mm
            - 120 kg


            Accessories for Crosscut and miter saws
            --------------------------------------------------
            ------------------------------
            -------
            All Crosscut and miter saws are the basic equipment without
            Sawblade

            Hydraulic feed brake (for type ZS 85 N to ZS 170 N)
            Price On Request!

            Hydraulic feed brake (for type ZS 200 and ZS 200 N)
            Price On Request!

            Pneumatic Sägeblattsprüheinrichtung
            Price On Request!

            Pneumatic material clamping left side for types ZS 85
            Price On Request!

            Pneumatic material clamping on both sides of the top for the types ZS 135 to ZS
            200 N
            Price On Request!

            Pneumatic maintenance unit, consisting of water,
            Pressure reducing valve with pressure gauge and lubricator
            Price On Request!

            Pressure reducing valve with pressure gauge
            Price On Request!

            Remodeling the crosscut saw type ZS 85 for electrical installation on type ZS
            85 E,
            suitable inclined to cut cable ducts Cutting Capacity at 45 °: 72 mm
            x 380 mm
            Price On Request!

            Pole-changing motor 400 volts, n = 1350/2750 rev / min for type ZS 85 E, for
            Cutting of thin-walled sheet steel channels
            Price On Request!

            Machine stand for the types ZS 85N, ZS 85 NS, ZS 85 NS-SW, ZS 135 and ZS
            170
            Price On Request!

            Machine stand for the types ZS 135 N and ZS 170 N
            Price On Request!

            Portable machine substructure with 1.5 mtr. Roller conveyors on each side, left
            Page
            Scale and stop slide (for types ZS 85 N to ZS 170 N)
            Price On Request!

            3 kW three-phase brake motor 380-400 volts (only types ZS 135 ZS to 170 N)
            Price On Request!

            Cross ruler to cut acute angles (not type ZS 85)
            Price On Request!

            Machine via handwheel on both sides tiltable, left to 45 ° right up to 60 °,
            from mid 90 ° (only type ZS 170 N)
            Price On Request!

            Holding device for angular aperture in Rolladenbau (only types ZS 135 to ZS
            200 N)
            Price On Request!

            Remodeling the crosscut saw type ZS 200 Saw blade diameter 550 mm, cutting
            height
            215 mm for the Rolladenbau
            Price On Request!

            Digital angle display for horizontal angle adjustment
            Price On Request!

            Digital angle indicator for horizontal and vertical angle adjustment (only
            in conjunction with machine on both sides tiltable)
            Price On Request!

            Laser device, laser beam with about 300 mm line length
            Price On Request!

            Hydropneumatic feed unit with two-hand safety control (only for
            the application range of aluminum machining)
            Price On Request!

            Motorized miter for horizontal and vertical angle adjustment
            with target / actual display
            Price On Request!

            Motorized miter for horizontal angle adjustment with
            Target / actual display
            Price On Request!

            Motorized miter for vertical angle adjustment with
            Target / actual display
            Price On Request!

            Chip bag with zipper for emptying (Machine type)
            Price On Request!

            Suction mobile 2.5 mtr. Hose, 400 V (in the commercial sector
            Wood dust is not allowed)
            Price On Request!

            Suction mobile 2.5 mtr. Hose, 400 V system with clean air
            Approval "H2"
            Price On Request!

            Automatic switch for machine with suction system
            Price On Request!

            Special cutting lengths up to approx 600 mm on request


            Blades:
            ---------------------
            HM circular saw blade for wood 300 x 3,2 x 40 mm 72 WZ neg
            Price On Request!

            HM circular saw blade for aluminum and plastics 300 x 3,3 x 40 mm 96 FTZ neg
            Price On Request!

            HM circular saw blade for thin-walled steel profiles 305 x 2,2 x 40 mm 80 FTZ
            neg (short service life)
            Price On Request!

            HM circular saw blade for wood 350 x 4,0 x 40 mm 42 WZ neg
            Price On Request!

            HM circular saw blade for wood 350 x 3,2 x 40 mm 72 WZ neg
            Price On Request!

            HM circular saw blade for aluminum and plastics 350 x 3.5 x 40 mm 108 FTZ neg
            Price On Request!

            HM circular saw blade for wood 420 x 4,0 x 40 mm 48 WZ neg
            Price On Request!

            HM circular saw blade for wood 420x3,5x40 mm 84 WZ neg
            Price On Request!

            HM circular saw blade for aluminum and plastics 420 x 3.8 x 40 mm 108 FTZ neg
            Price On Request!

            HM circular saw blade for wood 520 x 4,4 x 50 mm 60 WZ neg
            Price On Request!

            HM circular saw blade for aluminum and plastics 520 x 4.4 x 50 mm 120 FTZ neg
            Price On Request!

            HM circular saw blade for aluminum and plastics 550 x 4,0 x 50 mm 180 FTZ neg
            Price On Request!

            techn. Details according to manufacturer - ohn guarantee!
            All genes mentioned here prices are excl. Of VAT currently valid.
            (Inland)
          Datasheet
          Request / Contact

          Optimization cutting saw

          used  Optimization cutting saw SALVAMAC Salvapush 2000


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6836 · Optimization cutting saw

          SALVAMAC - Salvapush 2000 - - Neu -

          Technical details
          saw-blade dia. 500 mm︱Cutting height 120 mm︱Motor output 5,5/7,5 kW︱
            saw-blade dia. 500 mm
            Cutting height 120 mm
            Motor output 5,5/7,5 kW
          Datasheet
          Request / Contact

          Single-blade stroke circular saw

          used  Single-blade stroke circular saw MABA Swissline-Power 5200 CE


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6120 · Single-blade stroke circular saw

          MABA - Swissline-Power 5200 CE - - neu -

          Technical details
          Cutting height 205 mm︱Motor output 11 kW︱cutting width 450 mm︱Cutting length 5200 mm︱
            Cutting height 205 mm
            Motor output 11 kW
            cutting width 450 mm
            Cutting length 5200 mm
          Datasheet
          Request / Contact
          used  Single-blade stroke circular saw MABA Swissline Economic


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6314 · Single-blade stroke circular saw

          MABA - Swissline Economic - - neu -

          Technical details
          Cutting height 120 mm︱Motor output 11 kW︱cutting width 420 mm︱Cutting length 5200 mm︱
            Cutting height 120 mm
            Motor output 11 kW
            cutting width 420 mm
            Cutting length 5200 mm
          Datasheet
          Request / Contact

          Vertical panel saw

          used  Vertical panel saw ELCON Advance 215


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6777 · Vertical panel saw

          ELCON - Advance 215 - - Neu -

          Technical details
          Cutting length 5300 mm︱Cutting height 0-2.150, 80-2.050 mm︱automatic Option ja/nein︱
          ELCON precision panel saw type ADVANCE 215 Partnership Edition -------------------------------------- Technical description: Cutting height: vertical: 0-2,150mm, horizontal: 80-2,050mm Cutting length: 5,300mm Cutting depth: 80mm (with clamps: 55mm) Saw blade: diameter 303mm, bore 30mm, Z=60 hollow roof tooth Saw blade rotation: 5,000 rpm. Motor: 5.5 kW, including automatic star-delta start Required air pressure: 6 bar Measurement reading for horizontal saw cuts: -over scale from 0 - 2,070mm -via strip cutting stop from 75 - 500mm Measurement reading for vertical saw cuts: -over scale from 0 - 1,300mm Extraction connection: 1 x 100mm 1 x 120mm Features: -ADVANCE clamping system, consisting of: 2 pneumatic clamps, those on vertical axes are motorized on a ball screw from above move down. The tongs carry plates weighing max. 150 kg - Torsion-free, free-standing machine frame -Round rod guide, vertical and horizontal -pneumatically yielding slatted frame -Finely adjustable folding stop with stop extension -Fine adjustment for horizontal saw cuts via hand wheel -Strip cutting stop -Manual programming rail with 5 sliding blocks -Pneumatic immersion of the saw unit -25 material support rolls -1 infeed and 1 outfeed roller -pneumatic workpiece clamping device between the support rollers -3 central support elements, folding out pneumatically -Pneumatic saw head locking -Control panel with document holder -Switch unit on the saw unit: start button, stop button -Tool cabinet -Lighting scale for vertical saw cuts Partnership Edition Features: -Digital display for the folding stop -Digital display for the saw unit with incremental function -pneumatically swiveling saw unit -Scoring system with controlled counter-air nozzle, numerical display for scoring or groove depth adjustment and activation light -Cutting line laser -------------------------------------- Special price "Partnership Edition" ex works in this version: on request! -------------------------------------- Freight, installation and instruction costs (if the machine is not must be dismantled) - only applies within Germany. unloading and Lateral transport to the installation site is carried out by the customer. Price: EUR 2,750.00 plus statutory VAT -------------------------------------- Options with extra charge: Equipment package II - automatic feed: -Automatic feed with infinitely variable speed from 0-20m/min. -Adjustment of the traverse path to the workpiece size -Touch screen screen -Horizontal section positioning -automatic trimming process Price: EUR 14,990.00 plus statutory VAT Equipment package III (based on package II), consisting of: - Positioning and programmable folding stop - automatic interface positioning saw tree - Coupling of the two axes (e.g.: input 2,700mm, the stop moves up 700mm, the saw tree moves to the interface 2) Price: EUR 9,590.00 plus statutory VAT Cutting length 4,300mm instead of 5,300mm Price: EUR 0.00 plus statutory VAT ADVANCE clamping system with 3 clamps instead of 2 clamps, max. weight of the plate: 225 kg Price: EUR 8,890.00 plus statutory VAT Additional workpiece clamping device Price: EUR 590.00 plus statutory VAT 3 pneumatically usable plate setting buffers with switches on the machine frame Price: EUR 990.00 plus statutory VAT GERONNIMO plate wagon Price: EUR 1,490.00 plus statutory VAT GERONNE terminal, including: cutting optimization, operating instructions, Spare parts list and charger (without machine connection) Price: EUR 590.00 plus statutory VAT ----------------------------------------------------- Technical information according to the manufacturer - without guarantee!
            Cutting length 5300 mm
            Cutting height 0-2.150, 80-2.050 mm
            automatic Option ja/nein
            Description :
            ELCON precision panel saw type ADVANCE 215 Partnership Edition
            --------------------------------------
            Technical description:
            Cutting height: vertical: 0-2,150mm, horizontal: 80-2,050mm
            Cutting length: 5,300mm
            Cutting depth: 80mm (with clamps: 55mm)
            Saw blade: diameter 303mm, bore 30mm, Z=60 hollow roof tooth
            Saw blade rotation: 5,000 rpm.
            Motor: 5.5 kW, including automatic star-delta start
            Required air pressure: 6 bar
            Measurement reading for horizontal saw cuts:
            -over scale from 0 - 2,070mm
            -via strip cutting stop from 75 - 500mm
            Measurement reading for vertical saw cuts:
            -over scale from 0 - 1,300mm
            Extraction connection: 1 x 100mm 1 x 120mm

            Features:
            -ADVANCE clamping system, consisting of: 2 pneumatic clamps,
            those on vertical axes are motorized on a ball screw from above
            move down. The tongs carry plates weighing
            max. 150 kg
            - Torsion-free, free-standing machine frame
            -Round rod guide, vertical and horizontal
            -pneumatically yielding slatted frame
            -Finely adjustable folding stop with stop extension
            -Fine adjustment for horizontal saw cuts via hand wheel
            -Strip cutting stop
            -Manual programming rail with 5 sliding blocks
            -Pneumatic immersion of the saw unit
            -25 material support rolls
            -1 infeed and 1 outfeed roller
            -pneumatic workpiece clamping device between the support rollers
            -3 central support elements, folding out pneumatically
            -Pneumatic saw head locking
            -Control panel with document holder
            -Switch unit on the saw unit: start button, stop button
            -Tool cabinet
            -Lighting scale for vertical saw cuts

            Partnership Edition Features:
            -Digital display for the folding stop
            -Digital display for the saw unit with incremental function
            -pneumatically swiveling saw unit
            -Scoring system with controlled counter-air nozzle, numerical display for
            scoring
            or groove depth adjustment and activation light
            -Cutting line laser
            --------------------------------------
            Special price "Partnership Edition" ex works in this version: on request!
            --------------------------------------
            Freight, installation and instruction costs (if the machine is not
            must be dismantled) - only applies within Germany. unloading and
            Lateral transport to the installation site is carried out by the customer.
            Price: EUR 2,750.00 plus statutory VAT
            --------------------------------------
            Options with extra charge:

            Equipment package II - automatic feed:
            -Automatic feed with infinitely variable speed from
            0-20m/min.
            -Adjustment of the traverse path to the workpiece size
            -Touch screen screen
            -Horizontal section positioning
            -automatic trimming process
            Price: EUR 14,990.00 plus statutory VAT

            Equipment package III (based on package II), consisting of:
            - Positioning and programmable folding stop
            - automatic interface positioning saw tree
            - Coupling of the two axes (e.g.: input 2,700mm, the stop moves up
            700mm, the saw tree moves to the interface 2)
            Price: EUR 9,590.00 plus statutory VAT

            Cutting length 4,300mm instead of 5,300mm
            Price: EUR 0.00 plus statutory VAT

            ADVANCE clamping system with 3 clamps instead of 2 clamps, max. weight of the
            plate: 225
            kg
            Price: EUR 8,890.00 plus statutory VAT

            Additional workpiece clamping device
            Price: EUR 590.00 plus statutory VAT

            3 pneumatically usable plate setting buffers with switches on the machine frame
            Price: EUR 990.00 plus statutory VAT

            GERONNIMO plate wagon
            Price: EUR 1,490.00 plus statutory VAT

            GERONNE terminal, including: cutting optimization, operating instructions,
            Spare parts list and charger (without machine connection)
            Price: EUR 590.00 plus statutory VAT
            -----------------------------------------------------
            Technical information according to the manufacturer - without guarantee!
          Datasheet
          Request / Contact
          used  Vertical panel saw ELCON D 215 Partnership Edition


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6769 · Vertical panel saw

          ELCON - D 215 Partnership Edition - - Neu -

          Technical details
          Cutting length 4300 mm︱Cutting height 2150 mm︱automatic ,
          ELCON precision panel saw type D 215 ----------------------------------------------------- Cutting height: vertical 2,150mm, horizontal 2,100mm Cutting length: 4,300mm ----------------------------------------------------- Technical description: Cutting depth: max. 60mm Saw blade outlet behind the plate: max. 25mm Saw blade: diameter 250mm, bore 30mm, Z=48 hollow roof tooth Saw blade rotation: 5,100 rpm. Motor: 4 kW (S 6) Measurement reading for: horizontal saw cuts: via scale and strip cutting stop vertical saw cuts: above scale Extraction nozzle: 100 & 80mm Required air pressure: 6 bar Features: -Material support with 1 roll per meter of cutting length, switched on and off by foot pedal suspendable -1 infeed and outfeed roller -pneumatically yielding slatted frame -Central support, 1 support element per meter of cutting length, individually manually fold out -Scoring system: double cut of the main saw blade - Torsion-free, free-standing machine frame -Two folding stops for vertical saw cuts (above and below the middle support) ----------------------------------------------------- Special price "Partnership Edition" ex works in this version: on request! ----------------------------------------------------- plus pre-freight, freight, installation and instruction (if the machine does not have to be dismantled) Applies only within Germany. Unloading and cross transport to Installation location is determined by the customer. Price: EUR 1,900.00 plus statutory VAT ----------------------------------------------------- Options with extra charge: Cutting length 5,300mm instead of 4,300mm Order number: ELCO0075/O049 Surcharge: EUR 2,590.00 plus statutory VAT ----------------------------------------------------- Technical information according to the manufacturer - without guarantee!
            Cutting length 4300 mm
            Cutting height 2150 mm
            automatic ,
            Description :
            ELCON precision panel saw type D 215
            -----------------------------------------------------
            Cutting height: vertical 2,150mm, horizontal 2,100mm
            Cutting length: 4,300mm
            -----------------------------------------------------
            Technical description:

            Cutting depth: max. 60mm
            Saw blade outlet behind the plate: max. 25mm
            Saw blade: diameter 250mm, bore 30mm, Z=48 hollow roof tooth
            Saw blade rotation: 5,100 rpm.
            Motor: 4 kW (S 6)

            Measurement reading for:
            horizontal saw cuts: via scale and strip cutting stop
            vertical saw cuts: above scale
            Extraction nozzle: 100 & 80mm
            Required air pressure: 6 bar

            Features:
            -Material support with 1 roll per meter of cutting length, switched on and off
            by foot pedal
            suspendable
            -1 infeed and outfeed roller
            -pneumatically yielding slatted frame
            -Central support, 1 support element per meter of cutting length, individually
            manually
            fold out
            -Scoring system: double cut of the main saw blade
            - Torsion-free, free-standing machine frame
            -Two folding stops for vertical saw cuts (above and
            below the middle support)
            -----------------------------------------------------
            Special price "Partnership Edition" ex works in this version: on request!
            -----------------------------------------------------

            plus pre-freight, freight, installation and instruction
            (if the machine does not have to be dismantled)
            Applies only within Germany.
            Unloading and cross transport to
            Installation location is determined by the customer.

            Price: EUR 1,900.00 plus statutory VAT
            -----------------------------------------------------
            Options with extra charge:

            Cutting length 5,300mm instead of 4,300mm
            Order number: ELCO0075/O049

            Surcharge: EUR 2,590.00 plus statutory VAT
            -----------------------------------------------------

            Technical information according to the manufacturer - without guarantee!
          Datasheet
          Request / Contact

          Combined planing-thicknessing machine

          used  Combined planing-thicknessing machine PANHANS 546/100


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6308 · Combined planing-thicknessing machine

          PANHANS - 546/100 - - neu -

          Technical details
          Working width 630 mm︱Working height 3 - 250 mm︱Motor output 7,5 kW︱Feed speed 7 und 14 m/min.︱Dimensions (length / width) 2700 x 1700 mm︱weight ca. 1.450 kg︱Dust suction hood 2 x 160 mm︱
          COMBINED PLANNING AND THICKNESSING MACHINE 546|100 Manufacturer description Solid German mechanical engineering Convenient planing and thicknessing without machine conversion, dimensionally stable and precise dressing tables, as there is a folding up omitted, for planing widths up to 630 mm and dual operation up to 315 mm each PANHANS solid steel cutter block with 4 Tersa reversible knives SURFACE PLANE: Table length 2555 mm, planed with toothed table lips Electromotive adjustment of the feed table via button with digital display the chip removal max. 5 mm Dressing fence can be inclined up to 45°, in an extremely smooth-running steel guide stored Dressing ruler, anodised, with swiveling auxiliary stop 1545 Bridge protection TXF 1570 with hinged cover THICKNESS PLANER: Planing height from 3 to 250 mm, shortest part approx. 315 mm Max. chip removal 8 mm Pendulum mounted feed rollers Segmented rubber infeed and 2 rubber outfeed rollers with segmented pressure beams for gentle and safe workpiece feed Thicknessing table length 1100 mm, finely planed with table extension 400 mm, without table slide rollers Electrical height adjustment of the thicknessing table, non-tilting to 4 trapezoidal thread spindles Positioning control 4.3" touchscreen Two feed speeds: 7 + 14 m/min Push button circuit with electronic soft start Electronic, wear-free engine brake Planed in the factory CE compliant GS tested -------------------------------------- Basic price in the above equipment on request! We would be happy to send you the complete price list with options on request! (Technical data according to the manufacturer - without guarantee!)
            Working width 630 mm
            Working height 3 - 250 mm
            Motor output 7,5 kW
            Feed speed 7 und 14 m/min.
            Dimensions (length / width) 2700 x 1700 mm
            weight ca. 1.450 kg
            Dust suction hood 2 x 160 mm
            Description :
            COMBINED PLANNING AND THICKNESSING MACHINE 546|100

            Manufacturer description
            Solid German mechanical engineering
            Convenient planing and thicknessing without machine conversion, dimensionally
            stable and
            precise dressing tables, as there is a folding up
            omitted, for planing widths up to 630 mm and dual operation up to 315 mm each
            PANHANS solid steel cutter block with 4 Tersa reversible knives
            SURFACE PLANE:
            Table length 2555 mm, planed with toothed table lips
            Electromotive adjustment of the feed table via button with digital display
            the chip removal max. 5 mm
            Dressing fence can be inclined up to 45°, in an extremely smooth-running steel
            guide
            stored
            Dressing ruler, anodised, with swiveling auxiliary stop 1545
            Bridge protection TXF 1570 with hinged cover
            THICKNESS PLANER:
            Planing height from 3 to 250 mm, shortest part approx. 315 mm
            Max. chip removal 8 mm
            Pendulum mounted feed rollers
            Segmented rubber infeed and 2 rubber outfeed rollers with segmented pressure
            beams
            for gentle and safe workpiece feed
            Thicknessing table length 1100 mm, finely planed with table extension 400 mm,
            without
            table slide rollers
            Electrical height adjustment of the thicknessing table, non-tilting to 4
            trapezoidal thread spindles
            Positioning control 4.3" touchscreen
            Two feed speeds: 7 + 14 m/min
            Push button circuit with electronic soft start
            Electronic, wear-free engine brake
            Planed in the factory
            CE compliant
            GS tested
            --------------------------------------
            Basic price in the above equipment on request!

            We would be happy to send you the complete price list with options on request!

            (Technical data according to the manufacturer - without guarantee!)
          Datasheet
          Request / Contact

          Surface planer

          used  Surface planer PANHANS 334/20


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-5303 · Surface planer

          PANHANS - 334/20 - - neu -

          Technical details
          Working width 410 mm︱Length of the planing table 2850 mm︱Number of knives 4 (Tersa) St.︱Motor output 5,5 kW︱loading dimensions L x W x H 2950 x 1260 mm︱weight 870 kg︱
            Working width 410 mm
            Length of the planing table 2850 mm
            Number of knives 4 (Tersa) St.
            Motor output 5,5 kW
            loading dimensions L x W x H 2950 x 1260 mm
            weight 870 kg
          Datasheet
          Request / Contact
          used  Surface planer FIMAL PF 530 N Partnership Edition


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6751 · Surface planer

          FIMAL - PF 530 N Partnership Edition - - neu -

          Technical details
          Working width 530 mm︱Length of the planing table 3.000 mm︱Number of knives 4-TERSA St.︱Motor output 5,5 kW︱
          FIMAL surface planer type PF 530 N --------------------------------------- NEW MACHINE "Partnership Edition" Technical specifications: --------------------------------------- Planing table dimensions: 3,000 x 530 mm Feed table length: 1,800 mm Dressing fence dimensions: 1,500 x 175 mm Swivel range stop: 0 - 45 ° 4-knife cutterblock system TERSA d = 120mm: 5,000 rpm Max. Chip removal dressing according to CE: 8 mm Motor 380 volts / 50 Hz .: 5.5 kW Sound level according to EN 27960: 82.9 - 88.9 dB (A) Basic equipment: Electrics according to CE standards Magnetic brake Extraction nozzle d = 150mm Bridge protection control panel operated above Original AIGNER aluminum stop with integrated auxiliary stop --------------------------------------- Special offer from stock: --------------------------------------- All prices plus VAT / plus Freight and assembly according to expenditure (Technical information according to the manufacturer - without guarantee!)
            Working width 530 mm
            Length of the planing table 3.000 mm
            Number of knives 4-TERSA St.
            Motor output 5,5 kW
            Description :
            FIMAL surface planer type PF 530 N
            ---------------------------------------
            NEW MACHINE "Partnership Edition"

            Technical specifications:
            ---------------------------------------

            Planing table dimensions: 3,000 x 530 mm
            Feed table length: 1,800 mm
            Dressing fence dimensions: 1,500 x 175 mm
            Swivel range stop: 0 - 45 °
            4-knife cutterblock system TERSA d = 120mm: 5,000 rpm
            Max. Chip removal dressing according to CE: 8 mm
            Motor 380 volts / 50 Hz .: 5.5 kW
            Sound level according to EN 27960: 82.9 - 88.9 dB (A)

            Basic equipment:
            Electrics according to CE standards
            Magnetic brake
            Extraction nozzle d = 150mm
            Bridge protection
            control panel operated above
            Original AIGNER aluminum stop with integrated auxiliary stop

            ---------------------------------------
            Special offer from stock:
            ---------------------------------------
            All prices plus VAT / plus Freight and assembly according to expenditure

            (Technical information according to the manufacturer - without guarantee!)
          Datasheet
          Request / Contact

          Thicknessing machine

          used  Thicknessing machine PANHANS 436/100


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-5304 · Thicknessing machine

          PANHANS - 436/100 - - neu -

          Technical details
          Working width 630 mm︱Working height 3,300 mm︱Motor output 7,5 kW︱Number of knives 4 St.︱Feed speed 7 + 14 m/min.︱loading dimensions L x W x H 1070 x 1200 x 1060 mm︱weight 1050 kg︱
          Panhans thickness planer 436/100 ------------------------------------------------------ TECHNICAL SPECIFICATIONS ------------------------------------------------------ Planing width 630 mm Planing height 3 - 300 mm Max. chip removal 8 mm Thickness table length 1100 mm Knife shaft speed 5000 rpm Motor power feed 0.55 / 0.75 kW / 0.75 / 1.0 HP Suction connection Ø 160 mm left, right usable Feed speed 7 + 14 m/min Engine power 7.5 kW / 10 hp Voltage 400V / 50Hz Required space approx. 1070 x 1200 x 1060 mm Color RAL 7035 light gray and RAL 5000 violet blue Net weight approx. 1050 kg TECHNICAL DESCRIPTION ------------------------------------------------------ Solid German mechanical engineering For thickness planing for planing widths up to 630 mm and planing heights from 3 to 300 mm, compact and ergonomic machine dimensions Planed in the factory PANHANS solid steel cutter block Ø 125 mm with 4 Tersa reversible knives Pendulum mounted feed rollers Segmented rubber infeed and outfeed rollers with a diameter of 90 mm ensure gentle and safe workpiece feed With segmented pressure bar Electrical height adjustment of the thicknessing table, non-tilting to 4 trapezoidal thread spindles With a finely planed thicknessing table Positioning control 4.3" touch screen Two feed speeds: 7 + 14 m/min Automatic star-delta start Mechanical engine brake Suction socket Ø 160 mm, can be used on the left or right CE compliant GS tested ----------------------------------------------------- Price in the above version on request! Further accessories and options as well as a complete price list on request! (technical data according to the manufacturer - without guarantee!)
            Working width 630 mm
            Working height 3,300 mm
            Motor output 7,5 kW
            Number of knives 4 St.
            Feed speed 7 + 14 m/min.
            loading dimensions L x W x H 1070 x 1200 x 1060 mm
            weight 1050 kg
            Description :
            Panhans thickness planer 436/100
            ------------------------------------------------------

            TECHNICAL SPECIFICATIONS
            ------------------------------------------------------
            Planing width 630 mm
            Planing height 3 - 300 mm
            Max. chip removal 8 mm
            Thickness table length 1100 mm
            Knife shaft speed 5000 rpm
            Motor power feed 0.55 / 0.75 kW / 0.75 / 1.0 HP
            Suction connection Ø 160 mm left, right usable
            Feed speed 7 + 14 m/min
            Engine power 7.5 kW / 10 hp
            Voltage 400V / 50Hz
            Required space approx. 1070 x 1200 x 1060 mm

            Color RAL 7035 light gray and
            RAL 5000 violet blue
            Net weight approx. 1050 kg

            TECHNICAL DESCRIPTION
            ------------------------------------------------------
            Solid German mechanical engineering
            For thickness planing for planing widths up to 630 mm and planing heights from
            3 to 300 mm,
            compact and ergonomic machine dimensions
            Planed in the factory
            PANHANS solid steel cutter block Ø 125 mm with 4 Tersa reversible knives
            Pendulum mounted feed rollers
            Segmented rubber infeed and outfeed rollers with a diameter of 90 mm ensure
            gentle and
            safe workpiece feed
            With segmented pressure bar
            Electrical height adjustment of the thicknessing table, non-tilting to 4
            trapezoidal thread spindles
            With a finely planed thicknessing table
            Positioning control 4.3" touch screen
            Two feed speeds: 7 + 14 m/min
            Automatic star-delta start
            Mechanical engine brake
            Suction socket Ø 160 mm, can be used on the left or right
            CE compliant
            GS tested
            -----------------------------------------------------
            Price in the above version on request!

            Further accessories and options as well as a complete price list on request!

            (technical data according to the manufacturer - without guarantee!)
          Datasheet
          Request / Contact
          used  Thicknessing machine FIMAL SP 63 A Partnership Edition


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-2689 · Thicknessing machine

          FIMAL - SP 63 A Partnership Edition - - neu -

          Technical details
          Working width 630 mm︱Working height 3-310 mm︱Motor output 7,5 kW︱Number of knives 4-TERSA St.︱Feed speed 6-20 m/min.︱Vertikal stroke elektrisch
          FIMAL thickness planer type SP 63 A ----------------------------------------------------- NEW MACHINE "Partnership Edition" Technical data / basic equipment: ----------------------------------------------------- - 4-knife V-shaft, d = 120 mm, speed 4,800 rpm. - Table height adjustment via 4 trapezoidal spindles - chip removal up to 8 mm - Min. / Max. working height: 3/310 mm - Min. workpiece length: 250 mm - Suction nozzle 150 mm - Electrics and protections in accordance with CE standards - Planing width: 630 mm - Motor: 50 Hz., 5.5 kW / 7.5 HP with manual star-delta switch - Infinitely adjustable feed speed from 6 to 20 m/min. - Motorized table height adjustment with electronic positioning device (Input of planing height via keyboard with electronic display) - Sound level according to EN 27960: 86 – 90 dB(A) Stock machine additionally equipped with the following options: -------------------------------------------------- ------------- - Motor with 7.5 kW / 10 hp - Thicknessing table extension, 600 mm - 2x rubberized pull-out roller - TERSA system knife shaft, including reversible knives ----------------------------------------------------- Promotional price from stock: on request! ----------------------------------------------------- All prices ex warehouse plus VAT/plus. Freight and assembly at cost (Technical information according to the manufacturer - without guarantee!)
            Working width 630 mm
            Working height 3-310 mm
            Motor output 7,5 kW
            Number of knives 4-TERSA St.
            Feed speed 6-20 m/min.
            Vertikal stroke elektrisch
            Description :
            FIMAL thickness planer type SP 63 A
            -----------------------------------------------------
            NEW MACHINE "Partnership Edition"

            Technical data / basic equipment:
            -----------------------------------------------------
            - 4-knife V-shaft, d = 120 mm, speed 4,800 rpm.
            - Table height adjustment via 4 trapezoidal spindles
            - chip removal up to 8 mm
            - Min. / Max. working height: 3/310 mm
            - Min. workpiece length: 250 mm
            - Suction nozzle 150 mm
            - Electrics and protections in accordance with CE standards

            - Planing width: 630 mm
            - Motor: 50 Hz., 5.5 kW / 7.5 HP
            with manual star-delta switch
            - Infinitely adjustable feed speed from 6 to 20 m/min.
            - Motorized table height adjustment with electronic positioning device
            (Input of planing height via keyboard with electronic display)
            - Sound level according to EN 27960: 86 – 90 dB(A)

            Stock machine additionally equipped with the following options:
            -------------------------------------------------- -------------
            - Motor with 7.5 kW / 10 hp
            - Thicknessing table extension, 600 mm
            - 2x rubberized pull-out roller
            - TERSA system knife shaft, including reversible knives

            -----------------------------------------------------
            Promotional price from stock: on request!
            -----------------------------------------------------
            All prices ex warehouse plus VAT/plus. Freight and assembly at cost

            (Technical information according to the manufacturer - without guarantee!)
          Datasheet
          Request / Contact

          Spindle moulders with tiltable spindle

          used  Spindle moulders with tiltable spindle PANHANS 245/200


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6763 · Spindle moulders with tiltable spindle

          PANHANS - 245/200 - - Neu -

          Technical details
          Table dimensions 1100 (2300) x 760 mm︱Motor output 7,5 kW︱Spindle diameter 30 mm︱reus 1500 - 10000 U/min︱Weight ca. 880 kg︱
          Panhans swivel milling machine 245|200 ------------------------------------ Technical specifications ------------------------------------ Pos. 1: Table size 1100 x 760mm Table height 905mm Milling spindle 30mm with quick-release nut Clamping height 140mm Height adjustment 125mm Extraction connection 2 x Ø 120mm Stepless speed regulation 1500-10000 rpm Engine power 7.5 kW (10 hp) Net weight approx. 880kg Technical description: 7" touch control, optionally usable, top and below 7" capacitive touchscreen, even with gloves operable (e.g. with Maxi Flex) Language switching German, English, French (other languages ??on request) Milling zero point selectable in the program, 3 reference points Simple menu structure through innovative touch control (max. 2 levels) Display (work screen) for tool and Program number, height, angle, speed and milling stop hour meter Warning messages in case of incorrect operation Remote maintenance via Internet (VPN tunnel) USB interface for data backup and importing Tool, program and user Tool database for 5 tools (per tool 20 programs are possible) Heavy table router with double-sided pivoting, fixed Built-in milling spindle for a swivel range of +/- 45.5° 2-axis positioning control for height and swivel adjustment Electronic position and speed indicators Stepless speed regulation 1500 - 10000 rpm, 7.5 kW motor with 11 KW frequency converter Push button with electronic soft start left and right rotation Milling quick-clamping device Finely planed cast iron table with rigid frame support Milling fence 301 overall adjustment takes place via 1 manual hand wheel on the right side, Adjustment range approx. 140 mm, dimension display, Total stop via touchscreen +/-0.1mm, partial stop adjustment, (chip removal) +5mm to -25mm takes place via a star grip screw on the left side, measurement display via a mm vernier, clamp on the machine table manually via clamping lever screws, Milling fence made of die-cast aluminum with 2 face-milled cast iron stop slats 500mm long with aluminum splinter tongues, maximum possible Tool diameter is 250 mm machine socket Lockable main switch Electronic, wear-free engine brake Milling protection and pressure device GAMMA V 1629 Curved milling stop 1639 Tapoa Milling spindle 30mm with quick-release nut CE compliant Stat. Commodity number: 8465 9200 ------------------------------------ Basic price in the above version: on request! Ex works. Plus packaging and shipping ------------------------------------ Options with additional costs: ------------------------------------ Pos. 2 Table slider for table top 1100 x 760 mm Surfaces coated for fast, comfortable and tool-free adjustment to different Tool diameter up to max. 240mm, incl. front table insert with quick lock up to tool diameter 155mm instead of standard table insert rings (not in connection with turntable) Stat. Commodity number: 8465 9200 Surcharge: on request! ------------------------------------ Pos. 3 Table top extension on both sides For tabletop 1100 x 760mm, total length 2300mm consisting of 2 finely planed cast iron table tops Extension on the left and right of the standard machine table with smooth- running Frame support can be pulled out approx. 892mm to the front, with emergency stop button Stat. Commodity number: 8465 9200 Surcharge: on request ------------------------------------ Pos. 4 Milling arbor quick-change system HSK-80 with Spindle lock and milling arbor 30mm instead of milling spindle 30mm (higher concentricity and no sticking in the spindle as in the MK 5 system or steep taper) Stat. Commodity number: 8465 9200 Surcharge: on request! ------------------------------------ item 5 Feeder PV 84 4 wheels 120 x 60mm, 8 speeds: 2/4/5.6/6.7/11/13/16.5/33m/min, Right and left rotation, tripod with extension arm 1050mm, individually horizontal and can be used vertically, incl. mounting, cables and plug Stat. Commodity number: 8465 9200 Surcharge: on request! ------------------------------------ Pos. A (alternative position) Feeder Variomatic 4 N 4 rollers, stepless feed speed from 2 – 18m/min. Clockwise and counterclockwise rotation, fast turning of horizontal to vertical use, simply swing away and positioning with memory lock system; with comfort stand, numeric Height indicator, boom length 1050 mm, incl. Assembly, cable and connector Stat. Commodity number: 8465 9200 Surcharge: on request! ------------------------------------ item 6 console rigid for mounting a feed device approx. 195 x 180mm mounted on the left side of the table top; mandatory required when using router stop 204, 302, 320 and integral stop plates 650 + 650mm, with table top 1100x760mm Stat. Commodity number: 8465 9200 Surcharge: on request! ------------------------------------ Pos. 7 transport pallet approx. 2700 x 1580 mm Surcharge: on request! ------------------------------------ All prices in euros, net, plus statutory VAT (technical information according to the manufacturer, without guarantee!)
            Table dimensions 1100 (2300) x 760 mm
            Motor output 7,5 kW
            Spindle diameter 30 mm
            reus 1500 - 10000 U/min
            Weight ca. 880 kg
            Description :
            Panhans swivel milling machine 245|200
            ------------------------------------
            Technical specifications
            ------------------------------------
            Pos. 1:
            Table size 1100 x 760mm
            Table height 905mm
            Milling spindle 30mm with quick-release nut
            Clamping height 140mm
            Height adjustment 125mm
            Extraction connection 2 x Ø 120mm
            Stepless speed regulation 1500-10000 rpm
            Engine power 7.5 kW (10 hp)
            Net weight approx. 880kg

            Technical description:
            7" touch control, optionally usable, top and
            below
            7" capacitive touchscreen, even with gloves
            operable (e.g. with Maxi Flex)
            Language switching German, English, French
            (other languages ??on request)
            Milling zero point selectable in the program, 3 reference points
            Simple menu structure through innovative touch control
            (max. 2 levels)
            Display (work screen) for tool and
            Program number, height, angle, speed and
            milling stop
            hour meter
            Warning messages in case of incorrect operation
            Remote maintenance via Internet (VPN tunnel)
            USB interface for data backup and importing
            Tool, program and user
            Tool database for 5 tools (per tool
            20 programs are possible)
            Heavy table router with double-sided pivoting, fixed
            Built-in milling spindle for a swivel range of +/- 45.5°
            2-axis positioning control for height and
            swivel adjustment
            Electronic position and speed indicators
            Stepless speed regulation 1500 - 10000 rpm,
            7.5 kW motor with 11 KW frequency converter
            Push button with electronic soft start
            left and right rotation
            Milling quick-clamping device
            Finely planed cast iron table with rigid frame support
            Milling fence 301 overall adjustment takes place via 1
            manual hand wheel on the right side,
            Adjustment range approx. 140 mm, dimension display,
            Total stop via touchscreen +/-0.1mm,
            partial stop adjustment,
            (chip removal) +5mm to -25mm takes place
            via a star grip screw on the left
            side, measurement display via a mm vernier, clamp on
            the machine table manually via clamping lever screws,
            Milling fence made of die-cast aluminum with 2
            face-milled cast iron stop slats 500mm long
            with aluminum splinter tongues, maximum possible
            Tool diameter is 250 mm
            machine socket
            Lockable main switch
            Electronic, wear-free engine brake
            Milling protection and pressure device GAMMA V 1629
            Curved milling stop 1639 Tapoa
            Milling spindle 30mm with quick-release nut
            CE compliant
            Stat. Commodity number: 8465 9200
            ------------------------------------
            Basic price in the above version: on request!

            Ex works. Plus packaging and shipping
            ------------------------------------
            Options with additional costs:
            ------------------------------------
            Pos. 2
            Table slider for table top 1100 x 760 mm
            Surfaces coated for fast, comfortable and
            tool-free adjustment to different
            Tool diameter up to max. 240mm, incl.
            front table insert with quick lock up to
            tool diameter
            155mm instead of standard table insert rings (not in
            connection with turntable)
            Stat. Commodity number: 8465 9200
            Surcharge: on request!
            ------------------------------------
            Pos. 3
            Table top extension on both sides
            For tabletop 1100 x 760mm, total length 2300mm
            consisting of 2 finely planed cast iron table tops
            Extension on the left and right of the standard machine table with smooth-
            running
            Frame support can be pulled out approx. 892mm to the front, with emergency stop
            button
            Stat. Commodity number: 8465 9200
            Surcharge: on request
            ------------------------------------
            Pos. 4
            Milling arbor quick-change system HSK-80 with
            Spindle lock and milling arbor 30mm
            instead of milling spindle 30mm (higher concentricity and no sticking in the
            spindle as in the MK 5 system or steep taper)
            Stat. Commodity number: 8465 9200
            Surcharge: on request!
            ------------------------------------
            item 5
            Feeder PV 84
            4 wheels 120 x 60mm, 8 speeds:
            2/4/5.6/6.7/11/13/16.5/33m/min,
            Right and left rotation, tripod with extension arm 1050mm,
            individually horizontal
            and can be used vertically, incl. mounting, cables and
            plug
            Stat. Commodity number: 8465 9200
            Surcharge: on request!
            ------------------------------------
            Pos. A (alternative position)
            Feeder Variomatic 4 N
            4 rollers, stepless feed speed from 2 –
            18m/min. Clockwise and counterclockwise rotation, fast turning of
            horizontal to vertical use, simply swing away
            and positioning with memory lock system; with comfort stand, numeric
            Height indicator, boom length 1050 mm, incl.
            Assembly, cable and connector
            Stat. Commodity number: 8465 9200
            Surcharge: on request!
            ------------------------------------
            item 6
            console rigid
            for mounting a feed device approx. 195 x 180mm
            mounted on the left side of the table top; mandatory
            required when using router stop 204, 302,
            320 and integral stop plates 650 + 650mm, with table top
            1100x760mm
            Stat. Commodity number: 8465 9200
            Surcharge: on request!
            ------------------------------------
            Pos. 7
            transport pallet
            approx. 2700 x 1580 mm
            Surcharge: on request!
            ------------------------------------

            All prices in euros, net, plus statutory VAT

            (technical information according to the manufacturer, without guarantee!)
          Datasheet
          Request / Contact
          used  Spindle moulders with tiltable spindle PANHANS 245-100


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6764 · Spindle moulders with tiltable spindle

          PANHANS - 245-100 - - Neu -

          Technical details
          Table dimensions 1100 (2300) x 760 mm︱Motor output 5,5 kW︱Spindle diameter 30 mm︱reus 3000/4500/6000/9000 U/min︱Weight ca. 800 kg︱
          Panhans swivel milling machine 245|100 ------------------------------------ Technical specifications ------------------------------------ Pos. 1: Table size 1100 x 760mm Table height 870mm Milling spindle 30mm with quick-release nut Clamping height 140mm Height adjustment 125mm Extraction connection 2 x Ø 120mm Speed ??3000 / 4500 / 6000 / 9000rpm Engine power 5.5 kW (7.5 hp) Net weight approx. 800kg technical description Touch control can be used either above or below 7" capacitive touchscreen, even with gloves operable (e.g. with Maxi Flex) Language switching German, English, French (other languages ??on request) Milling zero point selectable in the program, 3 reference points Simple menu structure through innovative touch control (max. 2 levels) Display (work screen) for tool and Program number, height, angle, speed and milling stop hour meter Warning messages in case of incorrect operation Remote maintenance via Internet (VPN tunnel) USB interface for data backup and importing Tool, program and user Tool database for 3 tools (per tool 20 programs are possible) Milling machine with pivoting built-in Milling spindle for the swivel range from -5° to +45.5° 2-axis positioning control for height and swivel adjustment Electronic position and speed indicators 4 speeds 3000/4500/6000/9000 rpm Belt quick tensioning device Push button for spindle start and stop left and right rotation Milling quick-clamping device Finely planed cast iron table with rigid frame overlay Milling fence 301 overall adjustment takes place via 1 manual hand wheel on the right side, Adjustment range approx. 140mm, dimension display, Total stop via touchscreen +/-0.1mm, Part stop adjustment, (chip removal) +5mm to -25mm takes place via a star grip screw on the left side, measurement display via a mm vernier, Manual clamping on the machine table via clamping lever screws; milling stop off Die-cast aluminum with 2 face-milled cast stop plates 500mm long with aluminum splinter tongues; maximum possible Tool diameter is 250mm machine socket Lockable main switch mechanical engine brake Milling protection and pressure device GAMMA V 1629 Curved milling stop 1639 Tapoa Milling spindle 30mm with quick-release nut CE compliant Stat. Commodity number: 8465 9200 ------------------------------------ Basic price in the above version: on request! Ex works. Plus packaging and shipping ------------------------------------ Options with additional costs: ------------------------------------ Pos. 2 Swivel range of the milling spindle +/- 45.5° instead of +45.5° to -5° Stat. Commodity number: 8465 9200 Surcharge: on request! ------------------------------------ Pos. 3 Drive motor 7.5 kW instead of 5.5 kW Stat. Commodity number: 8465 9200 Surcharge: on request ------------------------------------ Pos. 4 Table slider for table top 1100 x 760 mm Surfaces coated for fast, comfortable and tool-free adjustment to different Tool diameter up to max. 240mm, incl. front table insert with quick lock up to tool diameter 155mm instead of standard table insert rings (not in connection with turntable) Stat. Commodity number: 8465 9200 Surcharge: on request! ------------------------------------ Pos. 5 Table top extension on both sides For tabletop 1100 x 760mm, total length 2300mm consisting of 2 finely planed cast iron table tops Extension each left and on the right of the standard machine table with smooth-running frame support approx. 892mm extendable to the front, with emergency stop button Stat. Commodity number: 8465 9200 Surcharge: on request! ------------------------------------ Pos. 6 Milling arbor quick-change system HSK-80 With spindle lock and milling arbor 30mm instead Milling spindle 30mm (higher concentricity and no sticking in the Spindle as in System MK 5 or steep cone) Stat. Commodity number: 8465 9200 Surcharge: on request! ------------------------------------ Pos. 7 Feeder PV 84 4 wheels 120 x 60mm, 8 speeds: 2/4/5.6/6.7/11/13/16.5/33m/min, Right and left rotation, tripod with extension arm 1050mm, individually horizontal and can be used vertically, incl. mounting, cables and plug Stat. Commodity number: 8465 9200 Surcharge: on request! ------------------------------------ Pos. A (alternative position) Feeder Variomatic 4 N 4 rollers, stepless feed speed from 2 – 18m/min. legal and Counter-clockwise rotation, fast turning from horizontal to vertical Mission; simple Swiveling away and positioning with memory lock system; with comfort stand, numeric Height indicator, boom length 1050 mm, incl. Assembly, cable and connector Stat. Commodity number: 8465 9200 Surcharge: on request! ------------------------------------ Pos. 8 console rigid for mounting a feed device approx. 195 x 180mm on the left side of the tabletop mounted; mandatory at Use of fence 204, 302, 320 and Integral stop plates 650 + 650mm, with table top 1100x760mm Stat. Commodity number: 8465 9200 Surcharge: on request! ------------------------------------ Pos. 9 transport pallet approx. 2700 x 1580 mm Surcharge: on request! ------------------------------------ All prices in euros, net, plus statutory VAT (technical information according to the manufacturer, without guarantee!)
            Table dimensions 1100 (2300) x 760 mm
            Motor output 5,5 kW
            Spindle diameter 30 mm
            reus 3000/4500/6000/9000 U/min
            Weight ca. 800 kg
            Description :
            Panhans swivel milling machine 245|100
            ------------------------------------
            Technical specifications
            ------------------------------------
            Pos. 1:
            Table size 1100 x 760mm
            Table height 870mm
            Milling spindle 30mm with quick-release nut
            Clamping height 140mm
            Height adjustment 125mm
            Extraction connection 2 x Ø 120mm
            Speed ??3000 / 4500 / 6000 / 9000rpm
            Engine power 5.5 kW (7.5 hp)
            Net weight approx. 800kg

            technical description

            Touch control can be used either above or below
            7" capacitive touchscreen, even with gloves
            operable (e.g. with Maxi Flex)
            Language switching German, English, French
            (other languages ??on request)
            Milling zero point selectable in the program, 3
            reference points
            Simple menu structure through innovative touch control
            (max. 2 levels)
            Display (work screen) for tool and
            Program number, height, angle, speed and
            milling stop
            hour meter
            Warning messages in case of incorrect operation
            Remote maintenance via Internet (VPN tunnel)
            USB interface for data backup and importing
            Tool, program and user
            Tool database for 3 tools (per tool
            20 programs are possible)
            Milling machine with pivoting built-in
            Milling spindle for the swivel range from -5° to +45.5°
            2-axis positioning control for height and
            swivel adjustment
            Electronic position and speed indicators
            4 speeds 3000/4500/6000/9000 rpm
            Belt quick tensioning device
            Push button for spindle start and stop
            left and right rotation
            Milling quick-clamping device
            Finely planed cast iron table with rigid
            frame overlay
            Milling fence 301 overall adjustment takes place via 1
            manual hand wheel on the right side,
            Adjustment range approx. 140mm, dimension display,
            Total stop via touchscreen +/-0.1mm,
            Part stop adjustment, (chip removal) +5mm to
            -25mm takes place via a star grip screw
            on the left side, measurement display via a mm vernier,
            Manual clamping on the machine table
            via clamping lever screws; milling stop off
            Die-cast aluminum with 2 face-milled cast stop plates
            500mm long
            with aluminum splinter tongues; maximum possible
            Tool diameter is 250mm
            machine socket
            Lockable main switch
            mechanical engine brake
            Milling protection and pressure device GAMMA V 1629
            Curved milling stop 1639 Tapoa
            Milling spindle 30mm with quick-release nut
            CE compliant
            Stat. Commodity number: 8465 9200
            ------------------------------------
            Basic price in the above version: on request!

            Ex works. Plus packaging and shipping
            ------------------------------------
            Options with additional costs:
            ------------------------------------
            Pos. 2
            Swivel range of the milling spindle +/- 45.5°
            instead of +45.5° to -5°
            Stat. Commodity number: 8465 9200
            Surcharge: on request!
            ------------------------------------
            Pos. 3
            Drive motor 7.5 kW instead of 5.5 kW
            Stat. Commodity number: 8465 9200
            Surcharge: on request
            ------------------------------------
            Pos. 4
            Table slider for table top 1100 x 760 mm
            Surfaces coated for fast, comfortable and
            tool-free adjustment to different
            Tool diameter up to max. 240mm, incl.
            front table insert with quick lock up to
            tool diameter
            155mm instead of standard table insert rings (not in
            connection with turntable)
            Stat. Commodity number: 8465 9200
            Surcharge: on request!
            ------------------------------------
            Pos. 5
            Table top extension on both sides
            For tabletop 1100 x 760mm, total length 2300mm
            consisting of
            2 finely planed cast iron table tops
            Extension each left and
            on the right of the standard machine table with smooth-running
            frame support approx.
            892mm extendable to the front, with emergency stop button
            Stat. Commodity number: 8465 9200
            Surcharge: on request!
            ------------------------------------
            Pos. 6
            Milling arbor quick-change system HSK-80
            With spindle lock and milling arbor 30mm instead
            Milling spindle 30mm
            (higher concentricity and no sticking in the
            Spindle as in
            System MK 5 or steep cone)
            Stat. Commodity number: 8465 9200
            Surcharge: on request!
            ------------------------------------
            Pos. 7
            Feeder PV 84
            4 wheels 120 x 60mm, 8 speeds:
            2/4/5.6/6.7/11/13/16.5/33m/min,
            Right and left rotation, tripod with extension arm 1050mm,
            individually horizontal
            and can be used vertically, incl. mounting, cables and
            plug
            Stat. Commodity number: 8465 9200
            Surcharge: on request!
            ------------------------------------
            Pos. A (alternative position)
            Feeder Variomatic 4 N
            4 rollers, stepless feed speed from 2 –
            18m/min. legal and
            Counter-clockwise rotation, fast turning from horizontal to vertical
            Mission; simple
            Swiveling away and positioning with
            memory lock system; with comfort stand, numeric
            Height indicator, boom length 1050 mm, incl.
            Assembly, cable and connector
            Stat. Commodity number: 8465 9200
            Surcharge: on request!
            ------------------------------------
            Pos. 8
            console rigid
            for mounting a feed device approx. 195 x 180mm
            on the left side of the
            tabletop mounted; mandatory at
            Use of fence 204, 302, 320 and
            Integral stop plates 650 + 650mm, with table top
            1100x760mm
            Stat. Commodity number: 8465 9200
            Surcharge: on request!
            ------------------------------------
            Pos. 9
            transport pallet
            approx. 2700 x 1580 mm
            Surcharge: on request!
            ------------------------------------

            All prices in euros, net, plus statutory VAT

            (technical information according to the manufacturer, without guarantee!)
          Datasheet
          Request / Contact

          Wood Milling Machine

          used  Wood Milling Machine GÖTZINGER UP 1730 Universalprofilierer


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6482 · Wood Milling Machine

          GÖTZINGER - UP 1730 Universalprofilierer - - neu -

          Technical details
          Table dimensions - mm︱Motor output 7,5 kW︱Spindle diameter 40 mm︱reus 6000 U/min︱Weight 300 kg︱Year 2018
          Universal profiler Götzinger UP 1730 Machine for frontal and cross-side machining. Different application technology for wood products First-class surface quality of machined workpieces due to high speed, Particularly stable bearing of the milling shaft and through synchronous milling. Rapid tool change through one-sided mounted cutter shaft and through swiveling clamping device. The whole work process, such as clamping, pneumatic-hydraulic table feed with speed control (stepless) and fast reverse. By exchanging the milling segments and by changing the attachment points can be up to ten different with a single profile milling set Create profile companies. Technical specifications: Cutting depth max .: 30 mm Milling height max .: 150 mm Voltage cross section per stroke max. Softwood: 60 cm² Motor power: 7.5 kW Speed: 6000 rpm Tool circle maximum: 180 mm Tool span: 200 mm Milling spindle diameter: 40 mm Milling spindle clamping length: 200 mm Working cycles max. per minute: 8 Compressed air connection: 6 bar Air requirement per working cycle: 14 l Air supply extraction: 3000m³ / h Dimensions: L / W / H: 1300 x 700 x 1170 mm Weight: 300 kg 380 V, 50 Hz (technical data according to manufacturer - without guarantee!)
            Table dimensions - mm
            Motor output 7,5 kW
            Spindle diameter 40 mm
            reus 6000 U/min
            Weight 300 kg
            Year 2018
            Description :
            Universal profiler Götzinger UP 1730

            Machine for frontal and cross-side machining.

            Different application technology for wood products

            First-class surface quality of machined workpieces due to high speed,
            Particularly stable bearing of the milling shaft and through synchronous
            milling.
            Rapid tool change through one-sided mounted cutter shaft and through
            swiveling clamping device.
            The whole work process, such as clamping, pneumatic-hydraulic table feed
            with speed control (stepless) and fast reverse.
            By exchanging the milling segments and by changing the attachment points
            can be up to ten different with a single profile milling set
            Create profile companies.

            Technical specifications:

            Cutting depth max .: 30 mm
            Milling height max .: 150 mm
            Voltage cross section per stroke max.
            Softwood: 60 cm²
            Motor power: 7.5 kW
            Speed: 6000 rpm
            Tool circle maximum: 180 mm
            Tool span: 200 mm
            Milling spindle diameter: 40 mm
            Milling spindle clamping length: 200 mm
            Working cycles max. per minute: 8

            Compressed air connection: 6 bar
            Air requirement per working cycle: 14 l
            Air supply extraction: 3000m³ / h

            Dimensions: L / W / H: 1300 x 700 x 1170 mm
            Weight: 300 kg

            380 V, 50 Hz


            (technical data according to manufacturer - without guarantee!)
          Datasheet
          Request / Contact

          Reverse conveyors

          used  Reverse conveyors SCM RP-S NT


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6793 · Reverse conveyors

          SCM - RP-S NT - - gebraucht -

          Technical details
          Workpiece dimensions , mm︱Total length 5500mm mm︱Feed speed 37 m/min.︱
          Workpiece return RP-S NT --------------------------------- Return device with tubular steel construction with high resistance to guarantee of robustness and solidity over time. A powered conveyor belt for the Workpiece transport to the operator. The conveyor belt is equipped with brakes equipped with wheels. 9 rolls processing width 220 mm Length 2500mm adjustable height 900 mm Roller diameter 60 mm with adjustable Inclination 0°-15°, variable center distance, at least 200 mm Unloading chute depth 900 mm 9 inclined idler roller aggregates with adjustable width and variable center distance from at least 200 mm Driven belt with a width of 300 mm Length 5500mm Motor 0.37 KW speed 37 m/min --------------------------------- (Technical information according to the manufacturer - without guarantee!
            Workpiece dimensions , mm
            Total length 5500mm mm
            Feed speed 37 m/min.
            Description :
            Workpiece return RP-S NT
            ---------------------------------
            Return device with tubular steel construction
            with high resistance to guarantee
            of robustness and solidity over time.

            A powered conveyor belt for the
            Workpiece transport to the operator.
            The conveyor belt is equipped with brakes
            equipped with wheels.

            9 rolls processing width 220 mm
            Length 2500mm
            adjustable height 900 mm
            Roller diameter 60 mm with adjustable
            Inclination 0°-15°, variable center distance,
            at least 200 mm

            Unloading chute depth 900 mm
            9 inclined idler roller aggregates with
            adjustable width and variable center distance
            from at least 200 mm

            Driven belt with a width of 300 mm
            Length 5500mm
            Motor 0.37 KW
            speed 37 m/min
            ---------------------------------
            (Technical information according to the manufacturer - without guarantee!
          Datasheet
          Request / Contact

          cnc-processing center

          used  cnc-processing center MASTERWOOD Project 485,Innenausbau,Platte


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6518 · cnc-processing center

          MASTERWOOD - Project 485,Innenausbau,Platte - - neu - Beckhoff CNC

          Technical details
          axis stroke (X,Y,Z) 3950,2145,555 mm︱Number of spindle head vertical 13 St.︱Number of spindles head horizontal 6 St.︱Number of tools 22 St.︱Number of milling agregates 1 St.︱working dimensions 3200x2000x200 mm︱Motor output 12 kW︱Control Beckhoff CNC︱Number of axles 5 St.︱
          Masterwood Project 385 CNC-Bearbeitungszentrum --------------------------------------------- 5-Achs CNC-Bearbeitungszentrum in Auslegerbauweise (dadurch sehr große PLatten auflegbar) für Innenausbau, Plattenbearbeitungen aller Art. Kurze Zusammenfassung: --------------------------------------------- Verfahrwege X = 3950 mm; Y = 2145 mm; Z = 555 mm Arbeitsbereich: X = 3200 mm; Y = 2000 mm; Z = 200 mm 1 Stk. 5-Achs-Hochleistungsspindel, 12 kW, mit HSK 63 F Aufnahme 1 Stk. fest installierter Bohrkopf mit 19 Spindeln mit 7 einzeln abrufbaren Vertikalbohrspindeln X-Richtung mit 6 einzeln abrufbaren Vertikalbohrspindeln Y-Richtung mit 2 doppelten Horizontalbohrspindeln X-Richtung und 1 doppelte Horizontalbohrspindel in Y-Richtung Sägeaggregat in Bohrkopf integriert Karussellwerkzeugwechsler mit 22 Plätzen und 102 mm Rasterabstand Konsolentisch mit 6 Traversen Werkstückanhebevorrichtung 24 Stk. Vakuummspanner für Platten und Innenausbau 1 Stk. Vakuumpumpe 100m3/h CE Schutzvorrichtung mit Bumper und Schutzgitter Referenzanschläge mit Endlauffühler Referenzring für Winkelgetriebe KIT Bogenbearbeitung (Vorbereitung für Einsatz von Massivholzspannern) Automatische Messvorrichtung für Werkzeuglänge Fernbedienung Beckhoff-Steuerung und Bosch Motorisierung Konstruktions-Software Masterwork: 2D-Wop für Standardanwendung Plattenbearbeitung/Innenausbau, Rundbogen, Türen Masterwork Funktion Lamelloverbindung Master 3D Stufe 2: für komplexere Bearbeitungen, optional auch erweiterbar für 5-Achs voll interpolierend Fracht und Montage innerhalb Deutschland Technik und Dienstleistungen gemäß beiliegender ausführliche Beschreibung --------------------------------------------- SONDERPREIS in dieser Ausführung: 99.990,00 Euro zzgl. St.! --------------------------------------------- Ausführliche Beschreibung siehe PDF anbei. Mehr Optionen auf Anfrage! (technische Angaben laut Hersteller- ohne Gewähr!)
            axis stroke (X,Y,Z) 3950,2145,555 mm
            Number of spindle head vertical 13 St.
            Number of spindles head horizont. 6 St.
            Number of tools 22 St.
            Number of milling agregates 1 St.
            working dimensions 3200x2000x200 mm
            Motor output 12 kW
            Control Beckhoff CNC
            Number of axles 5 St.
            Description :
            Masterwood Project 385 CNC-Bearbeitungszentrum
            ---------------------------------------------
            5-Achs CNC-Bearbeitungszentrum in Auslegerbauweise (dadurch sehr große PLatten
            auflegbar) für Innenausbau, Plattenbearbeitungen aller Art.

            Kurze Zusammenfassung:
            ---------------------------------------------
            Verfahrwege
            X = 3950 mm; Y = 2145 mm; Z = 555 mm

            Arbeitsbereich:
            X = 3200 mm; Y = 2000 mm; Z = 200 mm

            1 Stk. 5-Achs-Hochleistungsspindel, 12 kW, mit HSK 63 F Aufnahme

            1 Stk. fest installierter Bohrkopf mit 19 Spindeln
            mit 7 einzeln abrufbaren Vertikalbohrspindeln X-Richtung
            mit 6 einzeln abrufbaren Vertikalbohrspindeln Y-Richtung
            mit 2 doppelten Horizontalbohrspindeln X-Richtung
            und 1 doppelte Horizontalbohrspindel in Y-Richtung
            Sägeaggregat in Bohrkopf integriert

            Karussellwerkzeugwechsler mit 22 Plätzen und 102 mm Rasterabstand

            Konsolentisch mit 6 Traversen

            Werkstückanhebevorrichtung

            24 Stk. Vakuummspanner für Platten und Innenausbau

            1 Stk. Vakuumpumpe 100m3/h

            CE Schutzvorrichtung mit Bumper und Schutzgitter

            Referenzanschläge mit Endlauffühler

            Referenzring für Winkelgetriebe

            KIT Bogenbearbeitung (Vorbereitung für Einsatz von Massivholzspannern)

            Automatische Messvorrichtung für Werkzeuglänge

            Fernbedienung

            Beckhoff-Steuerung und Bosch Motorisierung

            Konstruktions-Software Masterwork:
            2D-Wop für Standardanwendung Plattenbearbeitung/Innenausbau, Rundbogen, Türen
            Masterwork Funktion Lamelloverbindung

            Master 3D Stufe 2:
            für komplexere Bearbeitungen,
            optional auch erweiterbar für 5-Achs voll interpolierend

            Fracht und Montage innerhalb Deutschland

            Technik und Dienstleistungen gemäß beiliegender
            ausführliche Beschreibung

            ---------------------------------------------

            SONDERPREIS in dieser Ausführung: 99.990,00 Euro zzgl. St.!

            ---------------------------------------------

            Ausführliche Beschreibung siehe PDF anbei. Mehr Optionen auf Anfrage!


            (technische Angaben laut Hersteller- ohne Gewähr!)
          Datasheet
          Request / Contact
          used  cnc-processing center MASTERWOOD TF 100 2.0 Partnership Edition


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6514 · cnc-processing center

          MASTERWOOD - TF 100 2.0 Partnership Edition - - neu -

          Technical details
          axis stroke (X,Y,Z) unbegrenzt, 1000, 60 mm︱Number of spindle head vertical 10 St.︱Number of spindles head horizontal 6 St.︱milling motor 4,5 kW︱
          CNC machining center at a Special PRICE! MASTERWOOD TF 100 2.0 Partnership Edition Furnishing: ----------------------------------------------------- - Drilling head with 16 drills for 5-sided machining - Grooving saw unit - Milling unit with 6-fold tool changer - incl. grooving saw blade, 2 diamond cutters, 1 WPL finishing cutter - Preparation for CLAMEX and door package - 2 foldable roller conveyors - program-controlled central lubrication ----------------------------------------------------- SPECIAL PRICE 44,990.00 euros (plus VAT) ex works ----------------------------------------------------- Freight, installation, instruction within Germany including 8-hour training individually and on site SPECIAL PRICE 3,000.00 euros (plus VAT) Partnership Edition Options: ----------------------------------------------------- Complete package for CLAMEX connectors consisting of: ----------------------------------------------------- - Angular gear with CLAMEX cutter incl. special recording in the tool changer and software adjustment - Original Lamello tool package: 2x P-System diamond milling cutters, milling arbor - Voucher for 300 pairs of CLAMEX P-14, 80 pairs of TENSO P-14 SPECIAL PRICE 3,500.00 euros (plus VAT) Complete door package consisting of: ----------------------------------------------------- - Angular gear with lock case cutter, special mount in - Tool changer, software adaptation including macro for lock case SPECIAL PRICE 3,500.00 euros (plus VAT) Software package PaletteCAD start + CAM connection ----------------------------------------------------- Our premium software with a perfectly coordinated CNC interface - with us of course already including CLAMEX macro. SPECIAL PRICE 3,000.00 euros (plus VAT) Promotional prices valid while stocks last. Subject to prior sale. Detailed description: The Masterwood CNC machining center PROJECT TF is ideal for complex CNC machining in the smallest of spaces, both for solid wood, panel materials or others Materials. Advantages: - Very small footprint - Maximum time savings thanks to extremely fast production times - Fast amortization due to the low purchase price - Fast learning of the technology through the simplest operation - Cleanliness of the workpieces with low suction power due to processing from underneath - Extremely fast, easy and variable programming with the Software MASTERWORK (standard) - Extremely fast and easy programming complete Cabinets through the use of TrunCAD (option) Technical specifications: Axles: X-axis: Max. workpiece length: unlimited, Min. workpiece length: 250mm Travel speed: 0-25 m/min. Y-axis: Max. workpiece width: 1,000mm for all aggregates Min. workpiece width: 80mm Travel speed: 0-50 m/min. Z-axis: Max. workpiece thickness: 60mm Min. workpiece thickness: 10mm Travel speed: 0-20 m/min. The minimum and maximum workpiece sizes are depending on the weight and also on the ratio length to width! Aggregates: 16 drilling head: vertical spindles in the X direction: 5 pieces vertical spindles in Y direction: 5 pieces horizontal double drilling spindle in X-direction: 2+2 pieces horizontal double drilling spindle in Y-direction: 1+1 piece Distance drilling spindles: 32mm Spindle speed: 4,000 rpm. Engine: 1.7kw Grooving saw: in the X direction Speed: 4,000 rpm. Max. saw blade diameter: 125mm Motor: 1.7 kW (The grooving saw is integrated in the drill head) Steering: Personal Computer HP Compaq 6000 Pro SFF PC Processor: Intel Celeron E3300 @ 2.50GHZ RAM: 1GB Hard disk: 300GB CD ROM drive 17'' LCD color screen Video card integrated 512 MB 2 Ethernet cards Interfaces: 2 serial RS 232 - 1 parallel - 10 USB - 1 ESATA Keyboard: Input PS 2 Mouse: Input PS 2 Operating system: Windows 7 professional Program: MASTERWORK MACHINE VERSION Further data: Required air pressure: 8 bar Air consumption: max. 750 l/min. suction: Volume: 2,000 m³/h Air speed: 25 - 30 m/sec. Extraction nozzle: 1 x 150mm Other features: - Air tables at work area - Roller table in the infeed and outfeed - Sensor for plate measurement - Ball screw and linear guides - Rack and pinion drive - Central lubrication - Import of DXF files "PARTNERSHIP EDITION" consisting of: milling unit, including MASTERWORK software extension Speed: 1,000 to 18,000 rpm. Motor: 4.5 kW with ISO 30 intake incl. integrated suction control (when drilling only the drill head, when milling only the milling unit sucked off) 6-fold tool changer 3 ISO 30 cones including collet Tool equipment, consisting of: HW dowel drill: 5 pieces 5mm - GL 70mm - blind hole drill 1 piece 5mm - GL 70mm - through drill 4 pieces 8mm - GL 57.5mm - blind hole drill 2 pieces 10mm - GL 57.5mm - blind hole drill bits 1 piece 10mm - GL 70mm - blind hole drill 1 piece 8mm - GL 70mm - blind hole drill 1 piece 15mm - GL 70mm - blind hole drill 1 piece 35mm - GL 70mm - blind hole drill 1 HW grooving saw blade d=125mm, bore=20mm, width: 3.2mm, Z=24 WZ 1 DIA cutter, right - GL=103mm, NL=43mm, D=18mm, shank: 20x50mm, Z 1+1 1 DIA cutter, left - GL=103mm, NL=43mm, D=18mm, shank: 20x50mm, Z 1+1 1 solid carbide finishing cutter, right, D=10mm Foldable roller conveyor in the inlet and outlet Automatic central lubrication (Technical information according to the manufacturer - without guarantee!)
            axis stroke (X,Y,Z) unbegrenzt, 1000, 60 mm
            Number of spindle head vertical 10 St.
            Number of spindles head horizont. 6 St.
            milling motor 4,5 kW
            Description :
            CNC machining center at a Special PRICE!

            MASTERWOOD TF 100 2.0 Partnership Edition

            Furnishing:
            -----------------------------------------------------
            - Drilling head with 16 drills for 5-sided machining
            - Grooving saw unit
            - Milling unit with 6-fold tool changer
            - incl. grooving saw blade, 2 diamond cutters, 1 WPL finishing cutter
            - Preparation for CLAMEX and door package
            - 2 foldable roller conveyors
            - program-controlled central lubrication
            -----------------------------------------------------

            SPECIAL PRICE 44,990.00 euros (plus VAT) ex works

            -----------------------------------------------------

            Freight, installation, instruction within Germany
            including 8-hour training individually and on site
            SPECIAL PRICE 3,000.00 euros (plus VAT)


            Partnership Edition Options:
            -----------------------------------------------------

            Complete package for CLAMEX connectors consisting of:
            -----------------------------------------------------
            - Angular gear with CLAMEX cutter incl.
            special recording in the tool changer and software adjustment
            - Original Lamello tool package: 2x P-System diamond milling cutters, milling
            arbor
            - Voucher for 300 pairs of CLAMEX P-14, 80 pairs of TENSO P-14

            SPECIAL PRICE 3,500.00 euros (plus VAT)

            Complete door package consisting of:
            -----------------------------------------------------
            - Angular gear with lock case cutter, special mount in
            - Tool changer, software adaptation including macro for lock case

            SPECIAL PRICE 3,500.00 euros (plus VAT)

            Software package PaletteCAD start + CAM connection
            -----------------------------------------------------
            Our premium software with a perfectly coordinated CNC interface - with us
            of course already including CLAMEX macro.

            SPECIAL PRICE 3,000.00 euros (plus VAT)


            Promotional prices valid while stocks last. Subject to prior sale.


            Detailed description:
            The Masterwood CNC machining center PROJECT TF
            is ideal for complex CNC machining in the smallest of spaces,
            both for solid wood, panel materials or others
            Materials.

            Advantages:
            - Very small footprint
            - Maximum time savings thanks to extremely fast production times
            - Fast amortization due to the low purchase price
            - Fast learning of the technology through the simplest operation
            - Cleanliness of the workpieces with low suction power due to processing
            from underneath
            - Extremely fast, easy and variable programming with the
            Software MASTERWORK (standard)
            - Extremely fast and easy programming complete
            Cabinets through the use of TrunCAD (option)

            Technical specifications:

            Axles:
            X-axis: Max. workpiece length: unlimited, Min. workpiece length: 250mm
            Travel speed: 0-25 m/min.

            Y-axis: Max. workpiece width: 1,000mm for all aggregates
            Min. workpiece width: 80mm
            Travel speed: 0-50 m/min.

            Z-axis: Max. workpiece thickness: 60mm
            Min. workpiece thickness: 10mm
            Travel speed: 0-20 m/min.

            The minimum and maximum workpiece sizes are
            depending on the weight and also on the ratio
            length to width!

            Aggregates:
            16 drilling head: vertical spindles in the X direction: 5 pieces
            vertical spindles in Y direction: 5 pieces
            horizontal double drilling spindle in X-direction: 2+2 pieces
            horizontal double drilling spindle in Y-direction: 1+1 piece
            Distance drilling spindles: 32mm
            Spindle speed: 4,000 rpm.
            Engine: 1.7kw
            Grooving saw: in the X direction
            Speed: 4,000 rpm.
            Max. saw blade diameter: 125mm
            Motor: 1.7 kW (The grooving saw is integrated in the drill head)

            Steering:
            Personal Computer HP Compaq 6000 Pro SFF PC
            Processor: Intel Celeron E3300 @ 2.50GHZ
            RAM: 1GB
            Hard disk: 300GB
            CD ROM drive
            17'' LCD color screen
            Video card integrated 512 MB
            2 Ethernet cards
            Interfaces: 2 serial RS 232 - 1 parallel - 10 USB -
            1 ESATA
            Keyboard: Input PS 2
            Mouse: Input PS 2
            Operating system: Windows 7 professional
            Program: MASTERWORK MACHINE VERSION

            Further data:
            Required air pressure: 8 bar
            Air consumption: max. 750 l/min.
            suction:
            Volume: 2,000 m³/h
            Air speed: 25 - 30 m/sec.
            Extraction nozzle: 1 x 150mm

            Other features:
            - Air tables at work area
            - Roller table in the infeed and outfeed
            - Sensor for plate measurement
            - Ball screw and linear guides
            - Rack and pinion drive
            - Central lubrication
            - Import of DXF files

            "PARTNERSHIP EDITION" consisting of:

            milling unit,
            including MASTERWORK software extension
            Speed: 1,000 to 18,000 rpm.
            Motor: 4.5 kW with ISO 30 intake
            incl. integrated suction control (when drilling
            only the drill head, when milling only the milling unit
            sucked off)

            6-fold tool changer

            3 ISO 30 cones including collet

            Tool equipment, consisting of: HW dowel drill:
            5 pieces 5mm - GL 70mm - blind hole drill
            1 piece 5mm - GL 70mm - through drill
            4 pieces 8mm - GL 57.5mm - blind hole drill
            2 pieces 10mm - GL 57.5mm - blind hole drill bits
            1 piece 10mm - GL 70mm - blind hole drill
            1 piece 8mm - GL 70mm - blind hole drill
            1 piece 15mm - GL 70mm - blind hole drill
            1 piece 35mm - GL 70mm - blind hole drill
            1 HW grooving saw blade d=125mm, bore=20mm, width: 3.2mm, Z=24 WZ
            1 DIA cutter, right - GL=103mm, NL=43mm, D=18mm, shank: 20x50mm, Z 1+1
            1 DIA cutter, left - GL=103mm, NL=43mm, D=18mm, shank: 20x50mm, Z 1+1
            1 solid carbide finishing cutter, right, D=10mm

            Foldable roller conveyor in the inlet and outlet

            Automatic central lubrication

            (Technical information according to the manufacturer - without guarantee!)
          Datasheet
          Request / Contact
          used  cnc-processing center MASTERWOOD Project 385


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6814 · cnc-processing center

          MASTERWOOD - Project 385 - - 2021 - BECKHOFF

          Technical details
          axis stroke (X,Y,Z) 4062, 2,922,660 mm︱Number of spindle head vertical 13 St.︱Number of spindles head horizontal 6 St.︱Number of tools 27 St.︱Number of milling agregates 1 St.︱working dimensions 3200,1500,200 mm︱Motor output 12 kW︱control BECKHOFF
          MASTERWOOD Project 385 (Winner) ------------------------------------- Exhibition machine built in 2021, available immediately! 5-axis CNC machining center in portal design for use for Interior fittings, doors, stairs optionally expandable with solid wood clamps Frame processing and arched windows Short Summary: ----------------------------------------------- Workspace: X = 3200mm ; Y = 1500mm; Z = 200mm 1 piece 5-axis high-performance spindle, 12 kW, with HSK 63 F mount 1 piece of permanently installed drill head with 19 spindles with 7 individually accessible vertical drilling spindles in the X direction with 6 individually accessible vertical drilling spindles in Y direction with 2 double horizontal drilling spindles in X direction and 1 double horizontal drilling spindle in Y direction Sawing unit integrated into the drill head 27 tool changing positions: Carousel tool changer with 22 positions and 102 mm grid spacing Linear 5-fold tool magazine for large tool diameters Original SCHMALZ tubeless work table. Console table with 6 traverses Workpiece lifting device Automatic tool length measuring device. Pack of 12 original Schmalz vacuum cleaners 114 x 140 mm height = 125 mm 1 piece Becker vacuum pump 100m3/h 1 piece chip conveyor belt Construction software Masterwork: 2D-Wop for standard application panel processing/interior construction, arches, doors Master 3D Level 2: for more complex processing, Optionally also expandable for 5-axis fully interpolating Prepared for the use of solid wood tensioners (round arches), Tensioner offered as an option if needed later Technology according to the enclosed, detailed description ----------------------------------------------- Total price in this version from the Oberkochen warehouse: on request! ----------------------------------------------- Freight and commissioning on request! Options for frame production/round arch with additional costs: ----------------------------------------------- Reference ring for holding chip guide elements on 5-axis electrospindles with HSK 63F mounts: 410.00 euros Basic kit for clamping arch elements - 6 pneumatic tensioners with two movements for arch elements: 7,090.00 euros (technical information according to the manufacturer - no guarantee!) Chip guide elements, price per piece: 460.00 euros All prices mentioned are net, plus tax. (technical information according to the manufacturer - no guarantee!)
            axis stroke (X,Y,Z) 4062, 2,922,660 mm
            Number of spindle head vertical 13 St.
            Number of spindles head horizont. 6 St.
            Number of tools 27 St.
            Number of milling agregates 1 St.
            working dimensions 3200,1500,200 mm
            Motor output 12 kW
            control BECKHOFF
            Description :
            MASTERWOOD Project 385 (Winner)
            -------------------------------------
            Exhibition machine built in 2021, available immediately!

            5-axis CNC machining center in portal design for use for
            Interior fittings, doors, stairs optionally expandable with solid wood clamps
            Frame processing and arched windows

            Short Summary:
            -----------------------------------------------
            Workspace:
            X = 3200mm ; Y = 1500mm; Z = 200mm

            1 piece 5-axis high-performance spindle, 12 kW, with HSK 63 F mount

            1 piece of permanently installed drill head with 19 spindles
            with 7 individually accessible vertical drilling spindles in the X direction
            with 6 individually accessible vertical drilling spindles in Y direction
            with 2 double horizontal drilling spindles in X direction
            and 1 double horizontal drilling spindle in Y direction
            Sawing unit integrated into the drill head

            27 tool changing positions:
            Carousel tool changer with 22 positions and 102 mm grid spacing
            Linear 5-fold tool magazine for large tool diameters

            Original SCHMALZ tubeless work table.
            Console table with 6 traverses

            Workpiece lifting device

            Automatic tool length measuring device.

            Pack of 12 original Schmalz vacuum cleaners 114 x 140 mm height = 125 mm

            1 piece Becker vacuum pump 100m3/h

            1 piece chip conveyor belt

            Construction software Masterwork:
            2D-Wop for standard application panel processing/interior construction, arches,
            doors

            Master 3D Level 2:
            for more complex processing,
            Optionally also expandable for 5-axis fully interpolating

            Prepared for the use of solid wood tensioners (round arches),
            Tensioner offered as an option if needed later

            Technology according to the enclosed, detailed description

            -----------------------------------------------

            Total price in this version from the Oberkochen warehouse: on request!

            -----------------------------------------------

            Freight and commissioning on request!


            Options for frame production/round arch with additional costs:
            -----------------------------------------------

            Reference ring for holding chip guide elements
            on 5-axis electrospindles with HSK 63F mounts: 410.00 euros

            Basic kit for clamping arch elements -
            6 pneumatic tensioners with two movements for arch elements: 7,090.00 euros
            (technical information according to the manufacturer - no guarantee!)

            Chip guide elements, price per piece: 460.00 euros


            All prices mentioned are net, plus tax.

            (technical information according to the manufacturer - no guarantee!)
          Datasheet
          Request / Contact

          Belt and profile sanding machine

          used  Belt and profile sanding machine LÖWER Holzbauschleifmaschine HBS 400


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-5704 · Belt and profile sanding machine

          LÖWER - Holzbauschleifmaschine HBS 400 - - neu -

          Technical details
          Number of sanding units 1 St.︱Profile width 390 mm︱Profile height max. 390 mm︱
            Number of sanding units 1 St.
            Profile width 390 mm
            Profile height max. 390 mm
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •   

            Trader Profile:   Engelfried Maschinentechnik GmbH

          Contact Trader



            Engelfried Maschinentechnik GmbH
           Elisabethenstr. 41
            73432 - Aalen
            Deutschland
            (0049)07361-98660">(0049)07361-98660
            (0049)07361-986640
            info@engelfried.com
            www.engelfried.com

          Profile of Trader

          Company Gebrüder Engelfried oHG
          Elisabethenstrasse 41
          73432 Aalen-Unterkochen
          Germany
           Tel. +49 (7361) 9866-0 Werner and Florian Engelfried
           Tel. +49 (7361) 9866-0 Florian Engelfried
           kom. 0602392773 Marian Grzeszkiewicz
           Teл.: +49 (7361) 9866-19 Кирилл Суппес

          Fax.: +49 (7361) 8431 
          info(at)engelfried.com

          Exhibition and warehouse: 
          Gewerbegebiet 
          Kapellenweg 25 
          73447 Oberkochen
          Germany 
          Tel. +49 (7364) 919323




          Engelfried Maschinentechnik GmbH   73432 - Aalen Elisabethenstr. 41 Deutschland
          Engelfried Maschinentechnik GmbH

          Elisabethenstr. 41



          Contact Trader


            Engelfried Maschinentechnik GmbH
           Elisabethenstr. 41
            73432 - Aalen
            Deutschland
            (0049)07361-98660
            (0049)07361-986640
            info@engelfried.com
            www.engelfried.com
            Contact person:

           





          Machine category


          Abrichthobelmaschine · Band- und Profilschleifmaschine · Bandsäge · Beschlagcenter · Bohr- und Dübeleintreibmaschine · Breitbandschleifmaschine · Clipsetzer fuer Holz-Alufenster · CNC-Bearbeitungszentrum · CNC-Bearbeitungszentrum Fenster u. Türen · Dickenhobelmaschine · Doppelgehrungssäge · Dreh- und Kipptisch · Ecklager- und Olivenbohrmaschine · Entstauber · Fensteranlage · Fensterlackieranlage · Fensterwerkzeuge · Formatkreissäge · Fräsmaschine · Furnierklebegerät · Furnierpresse · Füge- und Feinschnittmaschine · Glasleistensäge · Kantenschleifmaschine · Kapp- und Gehrungssäge · Keilzinkenanlage · Klammergeräte · Kombinierte Abricht- und Dickenhobelmasc · Kommissionswagen · Kompressor · Kreuzsprossenfräse · Lamellierpresse · Leimauftragsmaschine · Leimgerät · Längskreissäge · Längsschnittkreissäge · Minizinkenpresse · Montagestation · Olivenbohrmaschine · Optimierungskappsäge · Plattensägen vertikal · Profilwagen · Rahmen- und Langlochbohrmaschine · Rahmenpresse · Rollenbahn · Rundbogenfräsgeräte · Schleifmaschine · Schwenkfräsmaschine · Transportanlage · Transportwagen · Umfälzautomat · Universal-Dübellochbohrmaschine · Untertischkappsäge · Verglasungs- und Kontrollpresse · Verleimstern · Vierseitenhobelmaschine · Werkstückrückführung · Werkzeug-Reinigungsgeräte · Zapfenschneid- und Schlitzmaschine · Zerspanen ·