European network of stockholding machinery dealers

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:

          Zuefle GmbH - Stockist for used machines

          Machinelist:


          Copying Lathe

          used  Copying Lathe HEYLIGENSTAEDT HEYCOP 2/2000


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00282 · Copying Lathe

          HEYLIGENSTAEDT - HEYCOP 2/2000 - - 1960 -

          Technical details
          turning diameter over slide rest 250 mm︱centre distance 2000 mm︱copying travel longitudinal 2000 mm︱turning speeds 22 - 1120 U/min︱voltage 380 V︱total power requirement 11 kW︱weight of the machine ca. 3,65 t︱dimensions of the machine ca. 4 x 1,5 x 1,5 m︱
          We quote a copying lathe of type HEYLIGENSTAEDT HEYCOP 2/2000. This machine is in good running conditions and comes from company in our neighbourship. The quality and the shape of machine is in good manner. There can be turned parts up to dia. 250mm and lenght 2000mm, with chuck or between centers. The machine has copying devoice and is suitable for turning of quantity of same parts in short time. With the machine will be delivered chuck, lynette, oil bassin with high pressure pump, manual in German language and separate OUT-Button. Come for inspection to our company in Giebelstadt, about 80min from FRANKFURT AIRPORT.
            turning diameter over slide rest 250 mm
            centre distance 2000 mm
            copying travel longitudinal 2000 mm
            turning speeds 22 - 1120 U/min
            voltage 380 V
            total power requirement 11 kW
            weight of the machine ca. 3,65 t
            dimensions of the machine ca. 4 x 1,5 x 1,5 m
            Description :
            We quote a copying lathe of type HEYLIGENSTAEDT HEYCOP 2/2000. This machine is
            in good running conditions and comes from company in our neighbourship. The
            quality and the shape of machine is in good manner. There can be turned parts
            up to dia. 250mm and lenght 2000mm, with chuck or between centers. The machine
            has copying devoice and is suitable for turning of quantity of same parts in
            short time. With the machine will be delivered chuck, lynette, oil bassin with
            high pressure pump, manual in German language and separate OUT-Button. Come for
            inspection to our company in Giebelstadt, about 80min from FRANKFURT AIRPORT.
          Datasheet
          Request / Contact

          lathe-conventional-electronic

          used  lathe-conventional-electronic KART E2N-750-R


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00349 · lathe-conventional-electronic

          KART - E2N-750-R - - 1969 - konventionell

          Technical details
          turning diameter 250 mm︱turning length 750 mm︱swing diameter over bed slide 250 mm︱total power requirement 2,3 kW︱weight of the machine ca. 0,7 t︱dimensions of the machine ca. 3,1x1,4x1,6 m︱
          We offer a conventional lathe of the type KART E3N-750-R. This machine built in 1969 was used for cutting wedge and timing belt. There is also a boom with an adjustable distance to the axle center and a holder for a roller on which the wide belt hose was guided. Then the parting width with the Linear scale from Heidenhein VRZ400 B with linear encoder LS 603 C was adjusted and the belt cut off. Center distance 750mm Center height 125mm for Ø up to 250mm Speed 36-2,100 rpm Spindle mount MK4 Spindle clearance 26mm 380V 50Hz
          5.4A Longitudinal feeds 0.03-2.18mm/rev Cross feeds 0.015-1.09mm/rev for thread pitches: metric 0.2-7.5mm Modulus 0.25-2.5 inch 4-60G/1" With 4-jaw chuck Ø 150mm. Other accessories according to pictures. Come to Giebelstadt near Würzburg to view the machine. The machine is packed on a wooden pallet and loaded onto a truck by us.
            turning diameter 250 mm
            turning length 750 mm
            swing diameter over bed slide 250 mm
            total power requirement 2,3 kW
            weight of the machine ca. 0,7 t
            dimensions of the machine ca. 3,1x1,4x1,6 m
            Description :
            We offer a conventional lathe of the type KART E3N-750-R. This machine built in 1969 was used for cutting wedge and
            timing belt. There is also a boom with an adjustable distance to the axle center and a holder for a roller on which the wide
            belt hose was guided. Then the parting width with the
            Linear scale from Heidenhein VRZ400 B with linear encoder LS 603 C was adjusted and the belt cut off.

            Center distance 750mm
            Center height 125mm
            for Ø up to 250mm
            Speed 36-2,100 rpm
            Spindle mount MK4
            Spindle clearance 26mm
            380V 50Hz
            5.4A
            Longitudinal feeds 0.03-2.18mm/rev
            Cross feeds 0.015-1.09mm/rev
            for thread pitches:
            metric 0.2-7.5mm
            Modulus 0.25-2.5
            inch 4-60G/1"

            With 4-jaw chuck Ø 150mm. Other accessories according to pictures.

            Come to Giebelstadt near Würzburg to view the machine.

            The machine is packed on a wooden pallet and loaded onto a truck by us.
          2.500 €
          Datasheet
          Request / Contact

          Machining Center - Vertical

          used  Machining Center - Vertical EMAG HVC230E-X-10.5-0.6/3-1FD-HSK-A


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00360 · Machining Center - Vertical

          EMAG - HVC230E-X-10.5-0.6/3-1FD-HSK-A - - - konventionell

          Technical details
          turning speed range 3000 U/min︱voltage 188-400 V︱current intensivity 56-41 A︱total power requirement 105-22 kW︱weight of the machine ca. 196 kg︱
          STEP TEC / EMAG High-performance spindle for EMAG Type HVC230E-X-10.5-0.6/3-1FD-HSK-A63 Ident.No. 6033.004.A.10 c Serial No: 6033.0047 3000rpm 105-22kW 56-41A 188-400V 45/100/200Hz Motor spindle with HSK-A63 uptake unused or revised by the manufacturer Weight 196kg You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
            turning speed range 3000 U/min
            voltage 188-400 V
            current intensivity 56-41 A
            total power requirement 105-22 kW
            weight of the machine ca. 196 kg
            Description :
            STEP TEC / EMAG
            High-performance spindle
            for EMAG
            Type HVC230E-X-10.5-0.6/3-1FD-HSK-A63
            Ident.No. 6033.004.A.10 c
            Serial No: 6033.0047
            3000rpm
            105-22kW
            56-41A
            188-400V
            45/100/200Hz
            Motor spindle
            with HSK-A63 uptake
            unused or revised by the manufacturer
            Weight 196kg

            You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
          7.100 €
          Datasheet
          Request / Contact

          Bevel Gear Generator - Spiral

          used  Bevel Gear Generator - Spiral WMW-MODUL MK 12


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00446 · Bevel Gear Generator - Spiral

          WMW-MODUL - MK 12 - - - konventionell

          Technical details
          weight 29,4 kg︱
          WMW MODULE Arcoid cutter head MK 12" 2§m - 304.8 for bevel gears with tapered tooth height analog Gleason for bevel gear milling machine MODUL ZFTKK 500 28 knife inserts 05M VESTA WORKS 552 A-311 AJ/ck 30499005 used weight 29.4kg We have 4 different types in stock. You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
            weight 29,4 kg
            Description :
            WMW MODULE
            Arcoid cutter head
            MK 12"
            2§m - 304.8
            for bevel gears with tapered tooth height
            analog Gleason
            for bevel gear milling machine MODUL ZFTKK 500
            28 knife inserts 05M
            VESTA WORKS 552 A-311
            AJ/ck
            30499005
            used
            weight 29.4kg

            We have 4 different types in stock.

            You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
          1.500 €
          Datasheet
          Request / Contact

          Bevel Gear Generator - Straight

          used  Bevel Gear Generator - Straight KLINGELNBERG


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00397 · Bevel Gear Generator - Straight

          KLINGELNBERG - - - - konventionell

          Technical details

          KLINGELNBERG Palloid gear hobs We have around 450 milling cutters in stock in the module range from 1-7. Manufacturer KLINGELNBERG Please contact us! You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
            Description :
            KLINGELNBERG
            Palloid gear hobs
            We have around 450 milling cutters in stock in the module range from 1-7.

            Manufacturer KLINGELNBERG

            Please contact us!

            You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
          3.100 €
          Datasheet
          Request / Contact

          Gear Hobbing Machine - Horizontal

          used  Gear Hobbing Machine - Horizontal MIKRON M122.01


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00321 · Gear Hobbing Machine - Horizontal

          MIKRON - M122.01 - - 1980 -

          Technical details
          max. wheel diameter 40 mm︱gear width 35 mm︱max. module 1 ︱min. module 0 ︱voltage 380V 50Hz ︱total power requirement 0,61 kW︱weight of the machine ca. 320 kg︱dimensions of the machine ca. 70x67x134 cm︱
          We quote a horizontal and universal gear hobber of SWISS type MIKRON M122.01 in very good condition. This machine can hob spur and helical gears as well as worms up to module 1,00. The max. diameter is 40mm and width up to 35mm. With the machine is cooling pump with bassin and a set of changing wheels according to list and fixed in machine. Come for inspection to our storage in Giebelstadt, about 80min. from FRANKFURT AIRORT.
            max. wheel diameter 40 mm
            gear width 35 mm
            max. module 1
            voltage 380V 50Hz
            total power requirement 0,61 kW
            weight of the machine ca. 320 kg
            dimensions of the machine ca. 70x67x134 cm
            Description :
            We quote a horizontal and universal gear hobber of SWISS type MIKRON M122.01 in
            very good condition. This machine can hob spur and helical gears as well as
            worms up to module 1,00. The max. diameter is 40mm and width up to 35mm.

            With the machine is cooling pump with bassin and a set of changing wheels
            according to list and fixed in machine.

            Come for inspection to our storage in Giebelstadt, about 80min. from FRANKFURT
            AIRORT.

          4.500 €
          Datasheet
          Request / Contact

          Gear Noise under Load Testing Machine

          used  Gear Noise under Load Testing Machine HURTH ZP 300


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00268 · Gear Noise under Load Testing Machine

          HURTH - ZP 300 - - 2000 -

          Technical details
          max. wheel diameter 300 mm︱centre distance 500 mm︱max. module 6 mm︱min. module 0,1 mm︱total power requirement 35 kW︱weight of the machine ca. 1,5 t︱dimensions of the machine ca. 2,5 x 1,0 x 1,7 m︱
          The gear noise tester HURTH ZP 300 is used for noise tests of external gears with chance of error detection. Our machine is disassembled in our stock. The machine is in good working condition and can be overtaken now. Come and inspect the tester in Giebelstadt, nearby 80 min to Frankfurt airport. Description: This tester HURTH ZP 300 was in ´2000 complete mechanical overhauled and modernized by company FORTUNA (grinding machine specialist) with: - 2 new servo motors directly adapted to spindles, type BAUMÜLLER DS 100-S (17kW, 4000rpmn, 36Nm) - 2 new spindles of typeFORTUNA FIVY 90RL 190 HSK-40.301 for max. 6000rpm - 2 new couplings between servo and spindle of type KTR - HEIDENHAIN linear encoder for measuring of axial shift - HEIDENHAIN linear encoder LS 476 ML120mm for measuring of radial shift - 4 new BRUCKNER centers With this machine there is no controlling unit. So the machine is predestinated for customer, who wants to install new controller! Of this type we have 2 similar machines in stock.
            max. wheel diameter 300 mm
            centre distance 500 mm
            max. module 6 mm
            min. module 0,1 mm
            total power requirement 35 kW
            weight of the machine ca. 1,5 t
            dimensions of the machine ca. 2,5 x 1,0 x 1,7 m
            Description :
            The gear noise tester HURTH ZP 300 is used for noise tests of external gears
            with chance of error detection. Our machine is disassembled in our stock. The
            machine is in good working condition and can be overtaken now. Come and inspect
            the tester in Giebelstadt, nearby 80 min to Frankfurt airport.

            Description:
            This tester HURTH ZP 300 was in ´2000 complete mechanical overhauled and
            modernized by company FORTUNA (grinding machine specialist) with:
            - 2 new servo motors directly adapted to spindles, type BAUMÜLLER DS 100-S
            (17kW,
            4000rpmn, 36Nm)
            - 2 new spindles of typeFORTUNA FIVY 90RL 190 HSK-40.301 for max. 6000rpm
            - 2 new couplings between servo and spindle of type KTR
            - HEIDENHAIN linear encoder for measuring of axial shift
            - HEIDENHAIN linear encoder LS 476 ML120mm for measuring of radial shift
            - 4 new BRUCKNER centers

            With this machine there is no controlling unit. So the machine is predestinated
            for customer, who wants to install new controller!

            Of this type we have 2 similar machines in stock.
          6.200 €
          Datasheet
          Request / Contact
          used  Gear Noise under Load Testing Machine HURTH ZP 300


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00269 · Gear Noise under Load Testing Machine

          HURTH - ZP 300 - - 2000 -

          Technical details
          max. wheel diameter 300 mm︱centre distance 500 mm︱max. module 6 mm︱min. module 0,1 mm︱total power requirement 35 kW︱weight of the machine ca. 1,5 t︱dimensions of the machine ca. 2,5 x 1,0 x 1,7 m︱
          The gear noise tester HURTH ZP 300 is used for noise tests of external gears with chance of error detection. Our machine is disassembled in our stock. The machine is in good working condition and can be overtaken now. Come and inspect the tester in Giebelstadt, nearby 80 min to Frankfurt airport. Description: This tester HURTH ZP 300 was in ´2000 complete mechanical overhauled and modernized by company FORTUNA (grinding machine specialist) with: - 2 new servo motors directly adapted to spindles, type BAUMÜLLER DS 100-S (17kW, 4000rpmn, 36Nm) - 2 new spindles of typeFORTUNA FIVY 90RL 190 HSK-40.301 for max. 6000rpm - 2 new couplings between servo and spindle of type KTR - HEIDENHAIN linear encoder for measuring of axial shift - HEIDENHAIN linear encoder LS 476 ML120mm for measuring of radial shift - 4 new BRUCKNER centers With this machine there is no controlling unit. So the machine is predestinated for customer, who wants to install new controller! Of this type we have 2 similar machines in stock.
            max. wheel diameter 300 mm
            centre distance 500 mm
            max. module 6 mm
            min. module 0,1 mm
            total power requirement 35 kW
            weight of the machine ca. 1,5 t
            dimensions of the machine ca. 2,5 x 1,0 x 1,7 m
            Description :
            The gear noise tester HURTH ZP 300 is used for noise tests of external gears
            with chance of error detection. Our machine is disassembled in our stock. The
            machine is in good working condition and can be overtaken now. Come and inspect
            the tester in Giebelstadt, nearby 80 min to Frankfurt airport.

            Description:
            This tester HURTH ZP 300 was in ´2000 complete mechanical overhauled and
            modernized by company FORTUNA (grinding machine specialist) with:
            - 2 new servo motors directly adapted to spindles, type BAUMÜLLER DS 100-S
            (17kW,
            4000rpmn, 36Nm)
            - 2 new spindles of typeFORTUNA FIVY 90RL 190 HSK-40.301 for max. 6000rpm
            - 2 new couplings between servo and spindle of type KTR
            - HEIDENHAIN linear encoder for measuring of axial shift
            - HEIDENHAIN linear encoder LS 476 ML120mm for measuring of radial shift
            - 4 new BRUCKNER centers

            With this machine there is no controlling unit. So the machine is predestinated
            for customer, who wants to install new controller!

            Of this type we have 2 similar machines in stock.
          Datasheet
          Request / Contact

          Gear Shaping Machine

          used  Gear Shaping Machine LORENZ SJ00


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00345 · Gear Shaping Machine

          LORENZ - SJ00 - - 1965 -

          Technical details
          max. wheel diameter 180 mm︱gear width 45 mm︱max. module 4 ︱min. module 0,5 ︱stroke length max. 0 - 52 mm︱spindle taper innen MK 4 ︱table diameter 160 mm︱table bore diameter 75 mm︱no. of strokes 355 - 630 Hub/min︱dimensions of the machine ca. 2,30 x 1,50 x 2,36 m︱power capacity 6 kW︱weight of the machine ca. 2.500 kg︱
          This conventional gear shaper LORENZ SV00 with machine number 10437 is in good shape. It can be inspected in South Germany (Villingen-Schwenningen) under power and production. Maschine was some years ago complete overhauled at company STORK, Germany Additional costs for dismantling and loading +1000 €. Costs are for dismantling of upper electic cabinet and for transport of machine our of the small production room and loaded into truck.
            max. wheel diameter 180 mm
            gear width 45 mm
            max. module 4
            min. module 0,5
            stroke length max. 0 - 52 mm
            spindle taper innen MK 4
            table diameter 160 mm
            table bore diameter 75 mm
            no. of strokes 355 - 630 Hub/min
            dimensions of the machine ca. 2,30 x 1,50 x 2,36 m
            power capacity 6 kW
            weight of the machine ca. 2.500 kg
            Description :
            This conventional gear shaper LORENZ SV00 with machine number 10437 is in good
            shape. It can be inspected in South Germany (Villingen-Schwenningen) under
            power and production.

            Maschine was some years ago complete overhauled at company STORK, Germany

            Additional costs for dismantling and loading +1000 €. Costs are for dismantling
            of upper electic cabinet and for transport of machine our of the small
            production room and loaded into truck.
          Datasheet
          Request / Contact

          Punching and Die Stamping Press

          used  Punching and Die Stamping Press TÜNKERS PFS 900-150 75° T12-3


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00358 · Punching and Die Stamping Press

          TÜNKERS - PFS 900-150 75° T12-3 - - 2020 - konventionell

          Technical details
          press capacity 100 kN︱Angle 75 °︱weight of the machine ca. 55 kg︱required space 671x100x165 mm︱
          TÜNKERS embosser PFS 900-150 75° T12-3 Year of construction 3/2020 Pneumatic toggle unit unused Weight 55kg You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
            press capacity 100 kN
            Angle 75 °
            weight of the machine ca. 55 kg
            required space 671x100x165 mm
            Description :
            TÜNKERS
            embosser
            PFS 900-150
            75°
            T12-3
            Year of construction 3/2020
            Pneumatic toggle unit
            unused
            Weight 55kg

            You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
          4.400 €
          Datasheet
          Request / Contact
          used  Punching and Die Stamping Press BOSCH PS 20


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00387 · Punching and Die Stamping Press

          BOSCH - PS 20 - - 2003 - konventionell

          Technical details
          nominal pressure 20 kN︱Year of construction 2003 -︱weight of the machine ca. 15,3 kg︱
          BOSCH 20kN press spindle PS20 Order no. 060860004 Nominal force 20kN with 4 connection cables 1x 3607030223290 1x 3604491057287 1x 3608870348291 1x 3604491035290y< with junction box 3607021015 with transducer 3608870347 with acceptance inspection sheet with instructions without drive motor! Weight 15.3kg used Year of construction 2003 mint condition You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
            nominal pressure 20 kN
            Year of construction 2003 -
            weight of the machine ca. 15,3 kg
            Description :
            BOSCH
            20kN press spindle
            PS20
            Order no. 060860004
            Nominal force 20kN
            with 4 connection cables
            1x 3607030223290
            1x 3604491057287
            1x 3608870348291
            1x 3604491035290y<
            with junction box 3607021015
            with transducer 3608870347
            with acceptance inspection sheet
            with instructions
            without drive motor!
            Weight 15.3kg
            used
            Year of construction 2003
            mint condition

            You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
          3.700 €
          Datasheet
          Request / Contact
          used  Punching and Die Stamping Press TOX PRESSOTECHNIK  412799 TZ 05.363171.A.004


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00395 · Punching and Die Stamping Press

          TOX PRESSOTECHNIK - 412799 TZ 05.363171.A.004 - - - konventionell

          Technical details
          weight of the machine ca. 150 kg︱
          TOX PRESSOTECHNIK Clinching tongs 55kN complete 412799 TZ 05.363171.A.004 with clinching tongs 363171 with power module 289774 with EPMR: 055.034.100.00 289774.181 with test report unused top condition Weight 150kg You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
            weight of the machine ca. 150 kg
            Description :
            TOX PRESSOTECHNIK
            Clinching tongs 55kN complete 412799
            TZ 05.363171.A.004
            with clinching tongs 363171
            with power module 289774
            with EPMR: 055.034.100.00
            289774.181
            with test report
            unused
            top condition
            Weight 150kg

            You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
          3.300 €
          Datasheet
          Request / Contact
          used  Punching and Die Stamping Press TOX PRESSOTECHNIK  KT 05.0445


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00452 · Punching and Die Stamping Press

          TOX PRESSOTECHNIK - KT 05.0445 - - - konventionell

          Technical details
          press force 160 kN︱stroke length 85 mm︱power stroke 64 mm︱dimensions 120x30x63 cm︱weight 133 kg︱
          TOX PRESSOTECHNIK Powerpackage PowerKurver KT 05.0445 No. 402937.4 with pneumohydraulic translator ES 160.100.085.64 press force 160kN stroke 85mm thereof power stroke 64mm with control unit STE 075-923-1/2" dimensions 120x30x63cm unused pre-assembled connections weight 133kg You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
            press force 160 kN
            stroke length 85 mm
            power stroke 64 mm
            dimensions 120x30x63 cm
            weight 133 kg
            Description :
            TOX PRESSOTECHNIK
            Powerpackage
            PowerKurver
            KT 05.0445
            No. 402937.4
            with pneumohydraulic translator
            ES 160.100.085.64
            press force 160kN
            stroke 85mm
            thereof power stroke 64mm
            with control unit
            STE 075-923-1/2"
            dimensions 120x30x63cm
            unused
            pre-assembled connections
            weight 133kg

            You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
          1.400 €
          Datasheet
          Request / Contact

          Riveting Machine

          used  Riveting Machine BÖLLHOFF RIVSET 9525-080-619-6


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00338 · Riveting Machine

          BÖLLHOFF - RIVSET 9525-080-619-6 - - 2012 -

          Technical details
          pressure 2 t︱diameter 100 mm︱total power requirement 35 kW︱weight of the machine ca. 200 kg︱dimensions of the machine ca. 1 x 1 x 2 m︱
          BÖLLHOFF RIVSET punch rivet system - Item No. 95256409422 - complete for manual punch riveting - with punch rivet pliers 9525-080-619-6 - operating voltage 400V 50Hz, - Rated current 13A, main fuse 35A - Control voltage 24V, signal voltage 0-10V - with separate control - in RITTAL AE1073500 control cabinet - with BECKHOFF control unit C6525-0030 - with complete cooling unit HYDACOK-EL2S/3.0/M/400-50/1 - with foot switch - with documentation - complete with wiring - Year of construction 2012, but hardly used - Run in a car enthusiast's laboratory for testing - Weight approx. 200kg - used, but in excellent condition Come to visit Giebelstadt near Würzburg, about 80min. from FRANKFURT AIRPORT
            pressure 2 t
            diameter 100 mm
            total power requirement 35 kW
            weight of the machine ca. 200 kg
            dimensions of the machine ca. 1 x 1 x 2 m
            Description :
            BÖLLHOFF
            RIVSET punch rivet system

            - Item No. 95256409422
            - complete for manual punch riveting
            - with punch rivet pliers 9525-080-619-6
            - operating voltage 400V 50Hz,
            - Rated current 13A, main fuse 35A
            - Control voltage 24V, signal voltage 0-10V
            - with separate control
            - in RITTAL AE1073500 control cabinet
            - with BECKHOFF control unit C6525-0030
            - with complete cooling unit HYDACOK-EL2S/3.0/M/400-50/1
            - with foot switch
            - with documentation
            - complete with wiring
            - Year of construction 2012, but hardly used
            - Run in a car enthusiast's laboratory for testing
            - Weight approx. 200kg
            - used, but in excellent condition

            Come to visit Giebelstadt near Würzburg, about 80min. from FRANKFURT AIRPORT
          Datasheet
          Request / Contact

          Bolt Welding Device

          used  Bolt Welding Device NELSON FSE 902


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00369 · Bolt Welding Device

          NELSON - FSE 902 - - 2014 - konventionell

          Technical details
          current intensivity 220 A︱voltage 400 VAC︱weight of the machine ca. 215 kg︱required space 77x71x150 cm︱
          NELSON Bolt welding machine FSE 902 with inverter N4 with control panel N4 VGA 66-09-68 Hardware V3.01 Software V4.0 with mounting unit SO-FSE 902 ECP Stud type sleeve 8 250-1500A U1 = 400VAC 50/60Hz 3A I1max = 220A with Cooling AF Polarity STD with RLC 10-A1/40 Dimensions 77x71x150cm used Year of construction 2014 Weight 215kg Good condition You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
            current intensivity 220 A
            voltage 400 VAC
            weight of the machine ca. 215 kg
            required space 77x71x150 cm
            Description :
            NELSON
            Bolt welding machine FSE 902
            with inverter N4
            with control panel N4 VGA 66-09-68
            Hardware V3.01
            Software V4.0
            with mounting unit SO-FSE 902 ECP
            Stud type sleeve 8
            250-1500A
            U1 = 400VAC 50/60Hz 3A
            I1max = 220A
            with Cooling AF
            Polarity STD
            with RLC 10-A1/40
            Dimensions 77x71x150cm
            used
            Year of construction 2014
            Weight 215kg
            Good condition

            You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
          6.300 €
          Datasheet
          Request / Contact
          used  Bolt Welding Device NELSON FSE 100


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00370 · Bolt Welding Device

          NELSON - FSE 100 - - 2012 - konventionell

          Technical details
          voltage 230 V︱current intensivity 2000 A︱weight of the machine ca. 190 kg︱required space 77x76x150 cm︱
          NELSON Bolt welding machine FSE 100 with inverter N4 with control panel N4 VGA 66-09-24 Hardware V3.01 Software V4.01 with mounting unit SO-FSE 902 ECO Stud type sleeve 8 I2 = 2000A U1 = 230VAC 50Hz / 24VDC / 90VDC I1max = 10A with Cooling AF Polarity STD with RLC 10-A1/40 Dimensions 77x76x150cm used Year of construction 2012 Weight 190kg Good condition You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
            voltage 230 V
            current intensivity 2000 A
            weight of the machine ca. 190 kg
            required space 77x76x150 cm
            Description :
            NELSON
            Bolt welding machine FSE 100
            with inverter N4
            with control panel N4 VGA 66-09-24
            Hardware V3.01
            Software V4.01
            with mounting unit SO-FSE 902 ECO
            Stud type sleeve 8
            I2 = 2000A
            U1 = 230VAC 50Hz / 24VDC / 90VDC
            I1max = 10A
            with Cooling AF
            Polarity STD
            with RLC 10-A1/40
            Dimensions 77x76x150cm
            used
            Year of construction 2012
            Weight 190kg
            Good condition

            You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
          6.300 €
          Datasheet
          Request / Contact
          used  Bolt Welding Device NELSON Steuerbox NTC-1 SE


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00386 · Bolt Welding Device

          NELSON - Steuerbox NTC-1 SE - - 2011 - konventionell

          Technical details
          Year of construction 2011 -︱weight of the machine ca. 147 kg︱required space 77x60x120 cm︱
          NELSON Control box NTC-1 SE with inverter N4 with control panel N4 VGA 66-09-68 Hardware V3.01 Software V4.01 with mounting unit SO-FSE 902 ECO Stud type sleeve 8 I2 = 2000A U1 = 230VAC 50Hz / 24VDC / 90VDC I1max = 10A with Cooling AF Polarity STD with RLC 10-A1/40 Dimensions 77x60x120cm used Year of construction 2011 Weight 147kg Good condition You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
            Year of construction 2011 -
            weight of the machine ca. 147 kg
            required space 77x60x120 cm
            Description :
            NELSON
            Control box NTC-1 SE
            with inverter N4
            with control panel N4 VGA 66-09-68
            Hardware V3.01
            Software V4.01
            with mounting unit SO-FSE 902 ECO
            Stud type sleeve 8
            I2 = 2000A
            U1 = 230VAC 50Hz / 24VDC / 90VDC
            I1max = 10A
            with Cooling AF
            Polarity STD
            with RLC 10-A1/40
            Dimensions 77x60x120cm
            used
            Year of construction 2011
            Weight 147kg
            Good condition

            You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
          3.700 €
          Datasheet
          Request / Contact

          Spot Welding Machine

          used  Spot Welding Machine NIMAK C-Bügel-Schweißmodul


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00361 · Spot Welding Machine

          NIMAK - C-Bügel-Schweißmodul - - 2012 - konventionell

          Technical details
          throat 410 mm︱total power requirement 250 kW︱weight of the machine ca. 682 kg︱required space 166x106x278 cm︱
          NIMAK 250kW spot welding machine with cooling C-bracket welding module Item No. N1,000,777 - WITHOUT frequency inverter - WITHOUT controlling - Machine is not operational as it is only the basic machine! - For modernizers or specialist companies! Opening = 560mm Throat = 410mm U1N = 400V 50Hz with REXROTH transformer PSG 6250.00 ASTK MNR. R911171938 250kVA U1N = 530V f = 1000Hz U2d = 14V with PHOENIX CONTAKT Interbus IBS RL 24 DIO 8/8/8-LK-2MBD with mother feeding system Make FELDPAUSCH Dimensions 166 x 106 x 278cm Footprint 50x75cm Projection welding machine used Weight 682kg good condition Year of construction 2012 You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
            throat 410 mm
            total power requirement 250 kW
            weight of the machine ca. 682 kg
            required space 166x106x278 cm
            Description :
            NIMAK
            250kW spot welding machine
            with cooling
            C-bracket welding module
            Item No. N1,000,777

            - WITHOUT frequency inverter
            - WITHOUT controlling
            - Machine is not operational as it is only the basic machine!
            - For modernizers or specialist companies!

            Opening = 560mm
            Throat = 410mm
            U1N = 400V 50Hz
            with REXROTH transformer
            PSG 6250.00 ASTK
            MNR. R911171938
            250kVA
            U1N = 530V
            f = 1000Hz
            U2d = 14V
            with PHOENIX CONTAKT Interbus
            IBS RL 24 DIO 8/8/8-LK-2MBD
            with mother feeding system
            Make FELDPAUSCH
            Dimensions 166 x 106 x 278cm
            Footprint 50x75cm
            Projection welding machine
            used
            Weight 682kg
            good condition
            Year of construction 2012

            You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
          5.555 €
          Datasheet
          Request / Contact
          used  Spot Welding Machine NIMAK C-Bügel-Schweißmodul


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00367 · Spot Welding Machine

          NIMAK - C-Bügel-Schweißmodul - - 2012 - konventionell

          Technical details
          throat 350 mm︱Year 2012 -︱total power requirement 250 kW︱weight of the machine ca. 604 kg︱required space 100x104x207 cm︱
          NIMAK 250kW spot welding machine with cooling C-bracket welding module Item No. N1,000,775 - WITHOUT frequency inverter - WITHOUT controlling - Machine is not operational as it is only the basic machine! - For modernizers or specialist companies! Opening = 177mm Throat = 350mm U1N = 400V 50Hz with EHZ T1,420,008 Version AH 150 2000daN with REXROTH transformer PSG 6250.00 ASTK MNR. R911171938 250kVA U1N = 530V f = 1000Hz U2d = 14V with PHOENIX CONTAKT Interbus IBS RL 24 DIO 8/8/8-LK-2MBD Dimensions 100 x 104 x 207cm Footprint 40x50cm Projection welding machine used Weight 604kg good condition Year of construction 2012 You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
            throat 350 mm
            Year 2012 -
            total power requirement 250 kW
            weight of the machine ca. 604 kg
            required space 100x104x207 cm
            Description :
            NIMAK
            250kW spot welding machine
            with cooling
            C-bracket welding module
            Item No. N1,000,775

            - WITHOUT frequency inverter
            - WITHOUT controlling
            - Machine is not operational as it is only the basic machine!
            - For modernizers or specialist companies!

            Opening = 177mm
            Throat = 350mm
            U1N = 400V 50Hz
            with EHZ T1,420,008
            Version AH 150 2000daN
            with REXROTH transformer
            PSG 6250.00 ASTK
            MNR. R911171938
            250kVA
            U1N = 530V
            f = 1000Hz
            U2d = 14V
            with PHOENIX CONTAKT Interbus
            IBS RL 24 DIO 8/8/8-LK-2MBD
            Dimensions 100 x 104 x 207cm
            Footprint 40x50cm
            Projection welding machine
            used
            Weight 604kg
            good condition
            Year of construction 2012

            You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
          6.500 €
          Datasheet
          Request / Contact
          used  Spot Welding Machine NIMAK L193T/AI/75MF/1500-019/25-20


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00438 · Spot Welding Machine

          NIMAK - L193T/AI/75MF/1500-019/25-20 - - - konventionell

          Technical details
          total power requirement 75 kW︱voltage (U1N) 500 V︱voltage (U1N) 1-1000 Hz︱voltage (U20) 8,4 V︱current intensivity (I20C) 26,9 kA︱Sn 75 kVA︱Smax 225,9 kVA︱cooling water 10,8 l/min︱cylinder force 1500 daN︱air pressure 10 bar︱weight 69 kg︱dimensions 92x67x40 cm︱voltage max. (plug) 690 V︱amperage - max. (plug) 180 A︱
          NIMAK ClassicGun 75kW hand pliers for spot welding type L193T/AI/75MF/1500-019/25-20 U1N = 500V 1-1000Hz U20 = 8.4V I20C = 26.9kA Sn = 75kVA Smax = 225.9kVA cooling water Q = 10.8l/min with the following article numbers: A8.001.128 A3,022,023 A3,026,003 A6.004.017 A3,021,003 A3,042,005 K0,042,053 A6,029,016 K0,028,001 K7,170,020 cylinder J0.000.10/25/20 with forward stroke 25mm working stroke 20mm cylinder force 1500daN air pressure 10bar with cable connection for transformer MULTI CONTACT plug EG-TS-M50-150-3 max. 180A/690V dimensions approx. 92x67x40cm used very good condition weight 69kg We have 3 different types in stock. You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
            total power requirement 75 kW
            voltage (U1N) 500 V
            voltage (U1N) 1-1000 Hz
            voltage (U20) 8,4 V
            current intensivity (I20C) 26,9 kA
            Sn 75 kVA
            Smax 225,9 kVA
            cooling water 10,8 l/min
            cylinder force 1500 daN
            air pressure 10 bar
            weight 69 kg
            dimensions 92x67x40 cm
            voltage max. (plug) 690 V
            amperage - max. (plug) 180 A
            Description :
            NIMAK
            ClassicGun
            75kW hand pliers for spot welding
            type L193T/AI/75MF/1500-019/25-20
            U1N = 500V 1-1000Hz
            U20 = 8.4V
            I20C = 26.9kA
            Sn = 75kVA
            Smax = 225.9kVA
            cooling water Q = 10.8l/min
            with the following article numbers:
            A8.001.128
            A3,022,023
            A3,026,003
            A6.004.017
            A3,021,003
            A3,042,005
            K0,042,053
            A6,029,016
            K0,028,001
            K7,170,020
            cylinder J0.000.10/25/20
            with forward stroke 25mm
            working stroke 20mm
            cylinder force 1500daN
            air pressure 10bar
            with cable connection for transformer
            MULTI CONTACT
            plug EG-TS-M50-150-3
            max. 180A/690V
            dimensions approx. 92x67x40cm
            used
            very good condition
            weight 69kg

            We have 3 different types in stock.

            You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
          1.900 €
          Datasheet
          Request / Contact
          used  Spot Welding Machine NIMAK CHN41/AG/130MF/1060-007/70-50


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00437 · Spot Welding Machine

          NIMAK - CHN41/AG/130MF/1060-007/70-50 - - - konventionell

          Technical details
          total power requirement 130 kW︱voltage (U1N) 500 V︱voltage (U1N) 1-1000 Hz︱voltage (U20) 9 V︱current intensivity (I20C) 34,2 kA︱Sn 130 kVA︱Smax 307,8 kVA︱cooling water 10 l/min︱cylinder force 1080 daN︱air pressure 10 bar︱weight 106 kg︱dimensions 124x77x47 cm︱
          NIMAK ClassicGun 130kW hand pliers for spot welding CHN41/AG/130MF/1060-007/70-50 U1N = 500V 1-1000Hz U20 = 9V I20C = 34.2kA Sn = 130kVA Smax = 307.8kVA cooling water Q = 10l/min with the following article numbers: A9,000,442 A6.015.005 A6,053,001 A8.035.012 A8.034.013 K0,042,233 A6,027,012 A6,029,016 K0,042,193 A8.064.007 cylinder J1.000.07 with forward stroke 70mm working stroke 50mm cylinder force 1080daN air pressure 10bar with cable connection for transformer MULTI CONTACT plug EG-TS-M50-150-3 dimensions approx. 124x77x47cm used very good condition weight 106kg You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
            total power requirement 130 kW
            voltage (U1N) 500 V
            voltage (U1N) 1-1000 Hz
            voltage (U20) 9 V
            current intensivity (I20C) 34,2 kA
            Sn 130 kVA
            Smax 307,8 kVA
            cooling water 10 l/min
            cylinder force 1080 daN
            air pressure 10 bar
            weight 106 kg
            dimensions 124x77x47 cm
            Description :
            NIMAK
            ClassicGun
            130kW hand pliers for spot welding
            CHN41/AG/130MF/1060-007/70-50
            U1N = 500V 1-1000Hz
            U20 = 9V
            I20C = 34.2kA
            Sn = 130kVA
            Smax = 307.8kVA
            cooling water Q = 10l/min
            with the following article numbers:
            A9,000,442
            A6.015.005
            A6,053,001
            A8.035.012
            A8.034.013
            K0,042,233
            A6,027,012
            A6,029,016
            K0,042,193
            A8.064.007
            cylinder J1.000.07
            with forward stroke 70mm
            working stroke 50mm
            cylinder force 1080daN
            air pressure 10bar
            with cable connection for transformer
            MULTI CONTACT
            plug EG-TS-M50-150-3
            dimensions approx. 124x77x47cm
            used
            very good condition
            weight 106kg

            You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
          2.000 €
          Datasheet
          Request / Contact
          used  Spot Welding Machine NIMAK LHN41/AI/130MF/90NMFT/1500-031


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00436 · Spot Welding Machine

          NIMAK - LHN41/AI/130MF/90NMFT/1500-031 - - - konventionell

          Technical details
          total power requirement 90 kW︱voltage (U1N) 500 V︱voltage (U1N) 1-1000 Hz︱voltage (U20) 8,4 V︱current intensivity (I20C) 32,4 kA︱Sn 90 kVA︱Smax 272,2 kVA︱cooling water 6 l/min︱cylinder force 1500 daN︱air pressure 10 bar︱weight 83 kg︱
          NIMAK ClassicGun 90kW hand pliers for spot welding LHN41/AI/130MF/90NMFT/1500-031 U1N = 500V 1-1000Hz U20 = 8.4V I20C = 32.4kA Sn = 90kVA Smax = 272.2kVA cooling water Q = 6l/min with the following article numbers: B1,720,066 K0.055.031 A6,027,012 A5.021.005 K0,042,261 A8,039,001 cylinder J0.000.31/40/20 with forward stroke 40mm working stroke 20mm cylinder force 1500daN air pressure 10bar with cable connection for transformer MULTI CONTACT plug EG-TS-M50-150-3 used very good condition weight 83kg You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
            total power requirement 90 kW
            voltage (U1N) 500 V
            voltage (U1N) 1-1000 Hz
            voltage (U20) 8,4 V
            current intensivity (I20C) 32,4 kA
            Sn 90 kVA
            Smax 272,2 kVA
            cooling water 6 l/min
            cylinder force 1500 daN
            air pressure 10 bar
            weight 83 kg
            Description :
            NIMAK
            ClassicGun
            90kW hand pliers for spot welding
            LHN41/AI/130MF/90NMFT/1500-031
            U1N = 500V 1-1000Hz
            U20 = 8.4V
            I20C = 32.4kA
            Sn = 90kVA
            Smax = 272.2kVA
            cooling water Q = 6l/min
            with the following article numbers:
            B1,720,066
            K0.055.031
            A6,027,012
            A5.021.005
            K0,042,261
            A8,039,001
            cylinder J0.000.31/40/20
            with forward stroke 40mm
            working stroke 20mm
            cylinder force 1500daN
            air pressure 10bar
            with cable connection for transformer
            MULTI CONTACT
            plug EG-TS-M50-150-3
            used
            very good condition
            weight 83kg

            You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
          2.000 €
          Datasheet
          Request / Contact

          Welding Robot

          used  Welding Robot SCANSONIC APN1-YZ KG0003-040-BB


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00365 · Welding Robot

          SCANSONIC - APN1-YZ KG0003-040-BB - - 2013 - konventionell

          Technical details
          Year 2013 -︱weight of the machine ca. 12,6 kg︱required space 1x0,3x0,3 m︱
          SCANSONIC mechanical tracking system for arc welding Type APN1-YZ KG0003-040-BB with telescopic-arm unit Scapacs 1009505 with laser optical unit Scapacs 1011095 with force sensor N20 KM0014-001-AB with linear axis KM0008-0001-BA with control unit Ctrl-ST-Interbus-2MB KM0020-006-AA Scapacs 1011039 with 2x WEAB quick release plate B82-H28-S-AA with swivel axis W200-F KM0008-002-BA with connection cables unused weight 12.6kg You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
            Year 2013 -
            weight of the machine ca. 12,6 kg
            required space 1x0,3x0,3 m
            Description :
            SCANSONIC
            mechanical tracking system for
            arc welding
            Type APN1-YZ
            KG0003-040-BB
            with telescopic-arm unit Scapacs 1009505
            with laser optical unit Scapacs 1011095
            with force sensor N20
            KM0014-001-AB
            with linear axis KM0008-0001-BA
            with control unit Ctrl-ST-Interbus-2MB
            KM0020-006-AA
            Scapacs 1011039
            with 2x WEAB quick release plate
            B82-H28-S-AA
            with swivel axis W200-F
            KM0008-002-BA
            with connection cables
            unused
            weight 12.6kg

            You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
          6.700 €
          Datasheet
          Request / Contact

          Form Measuring Machine

          used  Form Measuring Machine MAHR ID 9754000


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00375 · Form Measuring Machine

          MAHR - ID 9754000 - - 2014 - konventionell

          Technical details
          Plate dimensions 65x65 cm︱machine weight ab. 285 kg︱dimensions of the machine ca. 1325x650x615 mmxmmxmm︱voltage 24/48 VDC︱Year 2014 -︱
          MAHR Tilt and swivel unit ID 9754000 for MFK500 + MFK600 Series DSRH 50 series 40.00 Swivel base dimensions 65x65cm Year of construction 2014 1.5kVA Control voltage 24/48VDC for MARForm form measuring center with operating instructions Dimensions 1325x650x615mm unused Weight 285kg Immaculate condition You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
            Plate dimensions 65x65 cm
            machine weight ab. 285 kg
            dimensions of the machine ca. 1325x650x615 mmxmmxmm
            voltage 24/48 VDC
            Year 2014 -
            Description :
            MAHR
            Tilt and swivel unit
            ID 9754000
            for MFK500 + MFK600
            Series DSRH 50 series 40.00
            Swivel base dimensions 65x65cm
            Year of construction 2014
            1.5kVA
            Control voltage 24/48VDC
            for MARForm form measuring center
            with operating instructions
            Dimensions 1325x650x615mm
            unused
            Weight 285kg
            Immaculate condition

            You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
          5.400 €
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •   

            Trader Profile:   Zuefle GmbH

          Contact Trader



            Zuefle GmbH
           Levi-Strauss-Str. 121
            97232 - Giebelstadt
            Deutschland
            +49 (0)9334-978608-0">+49 (0)9334-978608-0
            +49 (0)9334-978608-2
            info@zuefle.com
            www.zuefle.com

          Profile of Trader

          Since 1995 we are mainly active in the domain of gear technique. As a representative for manufacturers of gear producing machines, gear testing machines and tooling, we have received intensive knowledge in all technologies and part dimensions.

          Interested in customer specifications, we will search for the most economic solutions for producing gears. We like the unusual, the innovative and the vision.

          Today the ZÜFLE GmbH is trading of modernized and second hand gear machines. Additional we supply also machine tools in good condition. On our shop you can find also much tooling.

          We invite you to inspect machines and tooling in our stock in Würzburg, which is about 1h away from Frankfurt airport.

          In this homepage you can find actual quotes, technical datas and pictures of all machine tools

          Contact us for questions by email info@zuefle.com or by tel. +49-9334-9786080.

          Please see for yourself, that beside best machines and tools, service is our most important product.

          Dipl.-Ing. Dietmar Züfle


          Hallen

          Office & Warehouse 
          Züfle GmbH
          Levi-Strauss-Str. 121
          D-97232 Giebelstadt

           +49 (0) 9334-978608-0
           +49 (0) 9334-978608-2

           info@zuefle.com




          Zuefle GmbH   97232 - Giebelstadt Levi-Strauss-Str. 121 Deutschland
          Zuefle GmbH

          Levi-Strauss-Str. 121



          Contact Trader


            Zuefle GmbH
           Levi-Strauss-Str. 121
            97232 - Giebelstadt
            Deutschland
            +49 (0)9334-978608-0
            +49 (0)9334-978608-2
            info@zuefle.com
            www.zuefle.com
            Contact person:

           




          Machine category


          Ampullen Inspektionsmaschine · Anlage · Auswuchtmaschine · Auswuchtmaschine - Vertikal · Bearbeitungszentrum - Vertikal · Bolzenschweißgerät · Container · Drehmaschine-konventionell-elektronisch · Einhand-Magazinschrauber · Elektronik / SPS-Steuerungen · Ersatzteile · Filteranlage · Form-Messmaschine · Frequenzumformer · Förderband · Geräuschprüfmaschine · Hallenheizung · Hauswasserwerk · Hochfrequenzspindel · Hydraulikaggregat · Härteprüfer · Kegelradfräsmaschine-Bogenverzahnung · Kegelradfräsmaschine-Geradverzahnung · Kettenzug - von Hand · Kompressor und Druckluftaufbereitung · Kopierdrehmaschine · Kraftwerk · Kraftwerk - Dampf · Kraftwerk - Wasser · Krananlagen · Kühlanlagen Lebensmitteltechnik · Kühlmittelanlage · Labormischer · Linearförderer · Loch- und Prägepresse · Lynette · Messmaschine · Messsystem · Motor · Nahrungsmittelmaschinen - Diverse · Nietmaschine · Pneumatikartikel · Profilprojektor · Pumpenaggregat · Punktschweißmaschine · Rauhheitsprüfgerät · Reinigungsanlage · Roboter - Handling · Roboter - Schweißen · Rundtisch · Rührwerkskugelmühle · Schmutzwasser Baupumpe · Schutzschirm · Spannfutter · Ventilator · Waage · Warmluftofen · Wasseraufbereitung · Wendelförderer · Werkbänke · Zahnrad-Abwälzfräsmaschine - horizontal · Zahnradlaufprüfmaschine · Zahnradstossmaschine ·