European network of stockholding machinery dealers

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:

          WMT GmbH & Co.KG - Stockist for used machines

          Machinelist:


          Bench Lathe

          used  Bench Lathe KAMI DKM 250V.550


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78007 · Bench Lathe

          KAMI - DKM 250V.550 - - -neu- -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 130 mm︱turning length 550 mm︱turning speeds 50 - 2000 U/min︱centre height 125 mm︱spindle bore 20 mm︱tailstock quill taper MT 2 ︱tailstock quill stroke 60 mm︱metric threading 0,4 - 3,0 mm︱thread - inch 10 - 44 TPI︱thread - module 0,2 - 12,5 mm︱connected load frequency 230 V︱total power requirement 1,0 kW︱weight of the machine ca. 0,12 t︱dimensions of the machine ca. 1,09 x 0,59 x 0,45 m︱
          Equipped with - 20 mm spindle passage - adjustable guideways - Powerful 1.0 kW motor - continuously variable speed Scope of delivery: - 3-jaw chuck 100 mm, - 4-jaw faceplate chuck 125mm - standing and rotating bezel - Splash guard - Feed protection
            turning diameter over bed 250 mm
            turning diameter over slide rest 130 mm
            turning length 550 mm
            turning speeds 50 - 2000 U/min
            centre height 125 mm
            spindle bore 20 mm
            tailstock quill taper MT 2
            tailstock quill stroke 60 mm
            metric threading 0,4 - 3,0 mm
            thread - inch 10 - 44 TPI
            thread - module 0,2 - 12,5 mm
            connected load frequency 230 V
            total power requirement 1,0 kW
            weight of the machine ca. 0,12 t
            dimensions of the machine ca. 1,09 x 0,59 x 0,45 m
            Description :
            Equipped with
            - 20 mm spindle passage
            - adjustable guideways
            - Powerful 1.0 kW motor
            - continuously variable speed
            Scope of delivery:
            - 3-jaw chuck 100 mm,
            - 4-jaw faceplate chuck 125mm
            - standing and rotating bezel
            - Splash guard
            - Feed protection
          Datasheet
          Request / Contact
          used  Bench Lathe HBM 250 x 550 Norton Profi


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78003 · Bench Lathe

          HBM - 250 x 550 Norton Profi - - -neu- -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 140 mm︱turning length 550 mm︱turning speeds 125 - 2000 U/min︱centre height 125 mm︱spindle bore 26 mm︱tailstock quill taper MT 2 MK︱tailstock quill stroke 65 mm︱connected load frequency 230 V︱total power requirement 0,75 kW︱weight of the machine ca. 0,135 t︱dimensions of the machine ca. 1,25 x 0,6 x 0,6 m︱
          Speed in 6 levels 125 - 2000rpm. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. (Independent) Fixed bezel. Revolving bezel. 4-fold steel holder. chip tray. back panel. spindle protection. Hardened bed rails. Longitudinal feed with left / right switching. Set of change gears. Associated Tools.
            turning diameter over bed 250 mm
            turning diameter over slide rest 140 mm
            turning length 550 mm
            turning speeds 125 - 2000 U/min
            centre height 125 mm
            spindle bore 26 mm
            tailstock quill taper MT 2 MK
            tailstock quill stroke 65 mm
            connected load frequency 230 V
            total power requirement 0,75 kW
            weight of the machine ca. 0,135 t
            dimensions of the machine ca. 1,25 x 0,6 x 0,6 m
            Description :
            Speed in 6 levels 125 - 2000rpm.
            3-jaw chuck 125 mm.
            4-jaw chuck 125 mm. (Independent)
            Fixed bezel.
            Revolving bezel.
            4-fold steel holder.
            chip tray.
            back panel.
            spindle protection.
            Hardened bed rails.
            Longitudinal feed with left / right switching.
            Set of change gears.
            Associated Tools.
          Datasheet
          Request / Contact
          used  Bench Lathe ELMAG Superturn Vario mit MFB Vario


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78005 · Bench Lathe

          ELMAG - Superturn Vario mit MFB Vario - - -neu- -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 145 mm︱turning length 550 mm︱turning speeds 50 - 2000 U/min︱centre height 125 mm︱spindle bore 26 mm︱tailstock quill taper MT 2 MK︱connected load frequency 230 V︱bore capacity in steel 16 mm︱throat 169 mm︱quill stroke 50 mm︱turning speed range - drilling 50 - 2250 U/min︱spindle drive 0,5 kW︱total power requirement 0,75 kW︱weight of the machine ca. 0,175 t︱dimensions of the machine ca. 1,3 x 0,65 x 1,3 m︱
          3-axis LCD digital display system longitudinal feed. 3-jaw chuck 125 mm. 4-way steel holder. chip tray, bulkhead Hardened bed tracks. Emergency stop switch. lining protection Tool box, instruction manual.
            turning diameter over bed 250 mm
            turning diameter over slide rest 145 mm
            turning length 550 mm
            turning speeds 50 - 2000 U/min
            centre height 125 mm
            spindle bore 26 mm
            tailstock quill taper MT 2 MK
            connected load frequency 230 V
            bore capacity in steel 16 mm
            throat 169 mm
            quill stroke 50 mm
            turning speed range - drilling 50 - 2250 U/min
            spindle drive 0,5 kW
            total power requirement 0,75 kW
            weight of the machine ca. 0,175 t
            dimensions of the machine ca. 1,3 x 0,65 x 1,3 m
            Description :
            3-axis LCD digital display system
            longitudinal feed.
            3-jaw chuck 125 mm.
            4-way steel holder.
            chip tray, bulkhead
            Hardened bed tracks.
            Emergency stop switch.
            lining protection
            Tool box, instruction manual.
          Datasheet
          Request / Contact
          used  Bench Lathe KAMI DKM 250L


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78001 · Bench Lathe

          KAMI - DKM 250L - - -neu- -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 130 mm︱turning length 700 mm︱turning speeds 115 - 1620 U/min︱centre height 125 mm︱spindle bore 27 mm︱tailstock quill taper MT 2 ︱tailstock quill stroke 40 mm︱metric threading 0,2 - 3,5 mm︱thread - inch 8 - 56 inch.︱thread - module 0,2 - 12,5 mm︱swival range +/- Oberschlitten 45 °︱connected load frequency 400 V︱total power requirement 0,75 kW︱weight of the machine ca. 0,15 t︱dimensions of the machine ca. 1,41 x 0,61 x 0,41 m︱
          Equipped with - 27 mm spindle clearance - adjustable guideways - Powerful motor with 0.75 kW - High resolution of the axis spindles for exact positioning - Danger!! without digital display Scope of delivery: 3-jaw chuck 100 mm, change gear set, splash guard. On request also with 230 volt connection
            turning diameter over bed 250 mm
            turning diameter over slide rest 130 mm
            turning length 700 mm
            turning speeds 115 - 1620 U/min
            centre height 125 mm
            spindle bore 27 mm
            tailstock quill taper MT 2
            tailstock quill stroke 40 mm
            metric threading 0,2 - 3,5 mm
            thread - inch 8 - 56 inch.
            thread - module 0,2 - 12,5 mm
            swival range +/- Oberschlitten 45 °
            connected load frequency 400 V
            total power requirement 0,75 kW
            weight of the machine ca. 0,15 t
            dimensions of the machine ca. 1,41 x 0,61 x 0,41 m
            Description :
            Equipped with
            - 27 mm spindle clearance
            - adjustable guideways
            - Powerful motor with 0.75 kW
            - High resolution of the axis spindles for exact positioning
            - Danger!! without digital display
            Scope of delivery:
            3-jaw chuck 100 mm, change gear set, splash guard.

            On request also with 230 volt connection
          Datasheet
          Request / Contact
          used  Bench Lathe HBM 250 x 550 Profi Vario


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78002 · Bench Lathe

          HBM - 250 x 550 Profi Vario - - -neu- -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 140 mm︱turning length 550 mm︱turning speeds 50 - 2000 U/min︱centre height 125 mm︱spindle bore 26 mm︱tailstock quill taper MT 2 MK︱tailstock quill stroke 65 mm︱connected load frequency 230 V︱total power requirement 1,1 kW︱weight of the machine ca. 0,15 t︱dimensions of the machine ca. 1,3 x 0,6 x 0,65 m︱
          Benchtop lathe with base cabinet 3-axis LCD digital display system fully assembled. Longitudinal feed. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. Clamping plate. 4-way steel holder. Clock for thread cutting. Drip tray Hardened bed tracks. Emergency stop switch. Forage protection Set of wheels. Appropriate tools.
            turning diameter over bed 250 mm
            turning diameter over slide rest 140 mm
            turning length 550 mm
            turning speeds 50 - 2000 U/min
            centre height 125 mm
            spindle bore 26 mm
            tailstock quill taper MT 2 MK
            tailstock quill stroke 65 mm
            connected load frequency 230 V
            total power requirement 1,1 kW
            weight of the machine ca. 0,15 t
            dimensions of the machine ca. 1,3 x 0,6 x 0,65 m
            Description :
            Benchtop lathe with base cabinet
            3-axis LCD digital display system fully assembled.
            Longitudinal feed.
            3-jaw chuck 125 mm.
            4-jaw chuck 125 mm.
            Clamping plate.
            4-way steel holder.
            Clock for thread cutting.
            Drip tray
            Hardened bed tracks.
            Emergency stop switch.
            Forage protection
            Set of wheels.
            Appropriate tools.
          Datasheet
          Request / Contact
          used  Bench Lathe KAMI DKM 250L-1


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78000 · Bench Lathe

          KAMI - DKM 250L-1 - - -neu- -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 130 mm︱turning length 700 mm︱turning speeds 115 - 1620 U/min︱centre height 125 mm︱spindle bore 27 mm︱tailstock quill taper MT 2 ︱tailstock quill stroke 40 mm︱metric threading 0,2 - 3,5 mm︱thread - inch 8 - 56 inch.︱thread - module 0,2 - 12,5 mm︱swival range +/- Oberschlitten 45 °︱connected load frequency 400 V︱total power requirement 0,75 kW︱weight of the machine ca. 0,15 t︱dimensions of the machine ca. 1,41 x 0,61 x 0,41 m︱
          Equipped with - 2-axis digital measuring system with position indicator - manufactured according to DIN 8606 - 27 mm spindle passage - adjustable guideways "by adjustable strips" - Strong engine with 0.75 kW - High resolution of the axis spindles for exact positioning Delivery: 3-jaw chuck 100 mm, change gear set, splash guard 3-axis digital measuring system fully assembled.
            turning diameter over bed 250 mm
            turning diameter over slide rest 130 mm
            turning length 700 mm
            turning speeds 115 - 1620 U/min
            centre height 125 mm
            spindle bore 27 mm
            tailstock quill taper MT 2
            tailstock quill stroke 40 mm
            metric threading 0,2 - 3,5 mm
            thread - inch 8 - 56 inch.
            thread - module 0,2 - 12,5 mm
            swival range +/- Oberschlitten 45 °
            connected load frequency 400 V
            total power requirement 0,75 kW
            weight of the machine ca. 0,15 t
            dimensions of the machine ca. 1,41 x 0,61 x 0,41 m
            Description :
            Equipped with
            - 2-axis digital measuring system with position indicator
            - manufactured according to DIN 8606
            - 27 mm spindle passage
            - adjustable guideways "by adjustable strips"
            - Strong engine with 0.75 kW
            - High resolution of the axis spindles for exact positioning

            Delivery:
            3-jaw chuck 100 mm, change gear set, splash guard 3-axis
            digital measuring system fully assembled.
          Datasheet
          Request / Contact
          used  Bench Lathe ELMAG Superturn 250 x 550 Vario


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78004 · Bench Lathe

          ELMAG - Superturn 250 x 550 Vario - - -neu- -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 145 mm︱turning length 550 mm︱turning speeds 50 - 2000 U/min︱centre height 125 mm︱spindle bore 26 mm︱tailstock quill taper MT 2 MK︱connected load frequency 230 V︱total power requirement 0,75 kW︱weight of the machine ca. 0,12 t︱dimensions of the machine ca. 1,3 x 0,65 x 0,6 m︱
          longitudinal feed. 3-jaw chuck 125 mm. 4-way steel holder. chip tray, bulkhead Hardened bed tracks. Emergency stop switch. lining protection Tool box, instruction manual.
            turning diameter over bed 250 mm
            turning diameter over slide rest 145 mm
            turning length 550 mm
            turning speeds 50 - 2000 U/min
            centre height 125 mm
            spindle bore 26 mm
            tailstock quill taper MT 2 MK
            connected load frequency 230 V
            total power requirement 0,75 kW
            weight of the machine ca. 0,12 t
            dimensions of the machine ca. 1,3 x 0,65 x 0,6 m
            Description :
            longitudinal feed.
            3-jaw chuck 125 mm.
            4-way steel holder.
            chip tray, bulkhead
            Hardened bed tracks.
            Emergency stop switch.
            lining protection
            Tool box, instruction manual.
          Datasheet
          Request / Contact
          used  Bench Lathe HBM 290 x 750


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78006 · Bench Lathe

          HBM - 290 x 750 - - -neu- -

          Technical details
          turning diameter over bed 290 mm︱turning diameter over slide rest 170 mm︱turning length 750 mm︱turning speeds 75 - 2000 U/min︱centre height 145 mm︱spindle bore 38 mm︱tailstock quill taper MT 3 MK︱tailstock quill stroke 80 mm︱connected load frequency 230 V︱total power requirement 1,5 kW︱weight of the machine ca. 0,34 t︱dimensions of the machine ca. 1,3 x 0,75 x 0,7 m︱
          2-axis LCD digital display system (now new). Longitudinal and transverse feed. 3-jaw chuck 160 mm. 4-jaw chuck 160 mm. faceplate 4-way steel holder with 4 pcs tool holders 2 pcs. bezels Machine light Drip tray Hardened bed tracks. Emergency stop switch. Feed protection Set of wheels. Machine tools.
            turning diameter over bed 290 mm
            turning diameter over slide rest 170 mm
            turning length 750 mm
            turning speeds 75 - 2000 U/min
            centre height 145 mm
            spindle bore 38 mm
            tailstock quill taper MT 3 MK
            tailstock quill stroke 80 mm
            connected load frequency 230 V
            total power requirement 1,5 kW
            weight of the machine ca. 0,34 t
            dimensions of the machine ca. 1,3 x 0,75 x 0,7 m
            Description :
            2-axis LCD digital display system (now new).
            Longitudinal and transverse feed.
            3-jaw chuck 160 mm.
            4-jaw chuck 160 mm.
            faceplate
            4-way steel holder with 4 pcs tool holders
            2 pcs. bezels
            Machine light
            Drip tray
            Hardened bed tracks.
            Emergency stop switch.
            Feed protection
            Set of wheels.
            Machine tools.
          Datasheet
          Request / Contact

          Center Lathe

          used  Center Lathe BERNADO 165 Top


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-26019 · Center Lathe

          BERNADO - 165 Top - - 2015 -

          Technical details
          turning diameter over bed 350 mm︱turning diameter over slide rest 450 mm︱turning length 1000 mm︱turning diameter in the gap 450 mm︱turning speeds 70 - 2000 U/min︱centre height 175 mm︱spindle bore 38 mm︱total power requirement 2,2 kW︱weight of the machine ca. 0,55 t︱dimensions of the machine ca. 1,8 x 0,7 x 1,8 m︱
          Center Lathe - 3-axis digital display - 3-jaw chuck 160mm - Multifix steel holder with 4 cassettes - Coolant system - Machine light - 2 pcs. bezels
            turning diameter over bed 350 mm
            turning diameter over slide rest 450 mm
            turning length 1000 mm
            turning diameter in the gap 450 mm
            turning speeds 70 - 2000 U/min
            centre height 175 mm
            spindle bore 38 mm
            total power requirement 2,2 kW
            weight of the machine ca. 0,55 t
            dimensions of the machine ca. 1,8 x 0,7 x 1,8 m
            Description :
            Center Lathe
            - 3-axis digital display
            - 3-jaw chuck 160mm
            - Multifix steel holder with 4 cassettes
            - Coolant system
            - Machine light
            - 2 pcs. bezels

          Datasheet
          Request / Contact
          used  Center Lathe HARRISON M 300


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-26036 · Center Lathe

          HARRISON - M 300 - - 1995 -

          Technical details
          turning diameter over bed 330 mm︱turning diameter over slide rest 210 mm︱turning length 1000 mm︱turning diameter in the gap 380 mm︱turning speeds 40 - 2500 U/min︱centre height 165 mm︱spindle bore 38 mm︱total power requirement 2,2 kW︱weight of the machine ca. 0,7 t︱dimensions of the machine ca. 2,1 x0,9 x 1,3 m︱
          Lead and pull spindle lathe - Rapid traverse - 3-jaw chuck 160mm - Collet chuck - 4-way quick-change steel holder - 2 pcs bezels - Coolant system - Feed protection - chip trays - Chip protection wall - Emergency stop facility - Foot brake - Operating manual
            turning diameter over bed 330 mm
            turning diameter over slide rest 210 mm
            turning length 1000 mm
            turning diameter in the gap 380 mm
            turning speeds 40 - 2500 U/min
            centre height 165 mm
            spindle bore 38 mm
            total power requirement 2,2 kW
            weight of the machine ca. 0,7 t
            dimensions of the machine ca. 2,1 x0,9 x 1,3 m
            Description :
            Lead and pull spindle lathe
            - Rapid traverse
            - 3-jaw chuck 160mm
            - Collet chuck
            - 4-way quick-change steel holder
            - 2 pcs bezels
            - Coolant system
            - Feed protection
            - chip trays
            - Chip protection wall
            - Emergency stop facility
            - Foot brake
            - Operating manual
          Datasheet
          Request / Contact
          used  Center Lathe WMW DLZ 400


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-26035 · Center Lathe

          WMW - DLZ 400 - - 1980 -

          Technical details
          turning diameter over bed 400 mm︱turning diameter over slide rest 200 mm︱turning length 1500 mm︱turning diameter in the gap mm︱turning speeds 28 - 1400 U/min︱centre height 200 mm︱spindle bore 50 mm︱total power requirement 10,4 kW︱weight of the machine ca. 2,85 t︱dimensions of the machine ca. 3,5 x 1,4 x 1,6 m︱
          Center lathe - Rapid traverse - Faceplate 400mm - Multifix steel holder - Coolant system - Feed protection - chip trays - Chip protection wall - Emergency stop facility - Machine light
            turning diameter over bed 400 mm
            turning diameter over slide rest 200 mm
            turning length 1500 mm
            turning speeds 28 - 1400 U/min
            centre height 200 mm
            spindle bore 50 mm
            total power requirement 10,4 kW
            weight of the machine ca. 2,85 t
            dimensions of the machine ca. 3,5 x 1,4 x 1,6 m
            Description :
            Center lathe
            - Rapid traverse
            - Faceplate 400mm
            - Multifix steel holder
            - Coolant system
            - Feed protection
            - chip trays
            - Chip protection wall
            - Emergency stop facility
            - Machine light
          Datasheet
          Request / Contact
          used  Center Lathe WEILER LZ 280 S/2


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-25702 · Center Lathe

          WEILER - LZ 280 S/2 - - 1971 -

          Technical details
          turning diameter over bed 280 mm︱turning diameter over slide rest 155 mm︱turning diameter in the gap 350 mm︱turning length 800 mm︱turning speeds 26 - 2000 U/min︱spindle bore 24 mm︱connected load 1,6 kW︱weight of the machine ca. 0,7 t︱dimensions 1,55 x 0,8 x 1,3 m︱
          Lead and feed spindle lathe with - 3-jaw chuck - bezel - see pictures for additional accessories
            turning diameter over bed 280 mm
            turning diameter over slide rest 155 mm
            turning diameter in the gap 350 mm
            turning length 800 mm
            turning speeds 26 - 2000 U/min
            spindle bore 24 mm
            connected load 1,6 kW
            weight of the machine ca. 0,7 t
            dimensions 1,55 x 0,8 x 1,3 m
            Description :
            Lead and feed spindle lathe with
            - 3-jaw chuck
            - bezel
            - see pictures for additional accessories
          Datasheet
          Request / Contact
          used  Center Lathe WEISSER-HEILBRONN Gohliath


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-26018 · Center Lathe

          WEISSER-HEILBRONN - Gohliath - - 1970 -

          Technical details
          turning diameter over bed 500 mm︱turning diameter over slide rest 250 mm︱turning length 1200 mm︱turning diameter in the gap mm︱turning speeds 7,1 - 1400 U/min︱centre height 250 mm︱spindle bore 49 mm︱total power requirement 7,5 kW︱weight of the machine ca. 3,9 t︱dimensions of the machine ca. 2,85 x 1,3 x 1,6 m︱
          Lead and feed spindle lathe - 3-jaw chuck 260mm - 4-fold steel holder - Coolant system
            turning diameter over bed 500 mm
            turning diameter over slide rest 250 mm
            turning length 1200 mm
            turning speeds 7,1 - 1400 U/min
            centre height 250 mm
            spindle bore 49 mm
            total power requirement 7,5 kW
            weight of the machine ca. 3,9 t
            dimensions of the machine ca. 2,85 x 1,3 x 1,6 m
            Description :
            Lead and feed spindle lathe
            - 3-jaw chuck 260mm
            - 4-fold steel holder
            - Coolant system
          Datasheet
          Request / Contact
          used  Center Lathe VDF BOEHRINGER V 800


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-26039 · Center Lathe

          VDF BOEHRINGER - V 800 - - 1969 -

          Technical details
          turning diameter over bed 820 mm︱turning diameter over slide rest 575 mm︱turning length 1200 mm︱turning diameter in the gap 1040 mm︱turning speeds 7,1 - 1400 U/min︱centre height 410 mm︱spindle bore 84 mm︱total power requirement 11 kW︱weight of the machine ca. 3,7 t︱dimensions of the machine ca. 4,0 x 1,5 x 1,6 m︱
          Lead and pull spindle lathe - Forkardt 3-jaw chuck F400 - Multifix steel holder - Machine light
            turning diameter over bed 820 mm
            turning diameter over slide rest 575 mm
            turning length 1200 mm
            turning diameter in the gap 1040 mm
            turning speeds 7,1 - 1400 U/min
            centre height 410 mm
            spindle bore 84 mm
            total power requirement 11 kW
            weight of the machine ca. 3,7 t
            dimensions of the machine ca. 4,0 x 1,5 x 1,6 m
            Description :
            Lead and pull spindle lathe
            - Forkardt 3-jaw chuck F400
            - Multifix steel holder
            - Machine light

          Datasheet
          Request / Contact
          used  Center Lathe KAMI DKM 330


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78054 · Center Lathe

          KAMI - DKM 330 - - -neu- -

          Technical details
          turning diameter over bed 330 mm︱turning diameter over slide rest 210 mm︱turning length 635 mm︱turning diameter in the gap 480 mm︱turning speeds 58 - 2500 U/min︱centre height 167 mm︱spindle bore 40 mm︱tailstock quill taper MT 3 MK︱total power requirement 2,2 kW︱weight of the machine ca. 0,8 t︱
          Center lathe with - 3-jaw chuck F 315 - Fixed tailstock top - Multifix holder - 2-axis digital display - Fixed Lynette 180 mm - Coolant system - rapid traverse
            turning diameter over bed 330 mm
            turning diameter over slide rest 210 mm
            turning length 635 mm
            turning diameter in the gap 480 mm
            turning speeds 58 - 2500 U/min
            centre height 167 mm
            spindle bore 40 mm
            tailstock quill taper MT 3 MK
            total power requirement 2,2 kW
            weight of the machine ca. 0,8 t
            Description :
            Center lathe with
            - 3-jaw chuck F 315
            - Fixed tailstock top
            - Multifix holder
            - 2-axis digital display
            - Fixed Lynette 180 mm
            - Coolant system
            - rapid traverse
          Datasheet
          Request / Contact
          used  Center Lathe KAMI DKM 660 S


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78060 · Center Lathe

          KAMI - DKM 660 S - - -neu- -

          Technical details
          turning diameter over bed 660 mm︱turning diameter over slide rest 420 mm︱turning length 1500 mm︱turning diameter in the gap 840 mm︱turning speeds 36 - 1600 U/min︱centre height 330 mm︱spindle bore 103 mm︱tailstock quill taper MT 5 MK︱tailstock travel 150 mm︱tailstock quill diameter 75 mm︱total power requirement 11 kW︱weight of the machine ca. 3,2 t︱dimensions of the machine ca. 3,6 x 1,1 x 1,45 m︱
          Center lathe with - 3-jaw chuck F 315 - Fixed tailstock top - Multifix holder - 2-axis digital display - Fixed Lynette 180 mm - Coolant system - rapid traverse
            turning diameter over bed 660 mm
            turning diameter over slide rest 420 mm
            turning length 1500 mm
            turning diameter in the gap 840 mm
            turning speeds 36 - 1600 U/min
            centre height 330 mm
            spindle bore 103 mm
            tailstock quill taper MT 5 MK
            tailstock travel 150 mm
            tailstock quill diameter 75 mm
            total power requirement 11 kW
            weight of the machine ca. 3,2 t
            dimensions of the machine ca. 3,6 x 1,1 x 1,45 m
            Description :
            Center lathe with
            - 3-jaw chuck F 315
            - Fixed tailstock top
            - Multifix holder
            - 2-axis digital display
            - Fixed Lynette 180 mm
            - Coolant system
            - rapid traverse
          Datasheet
          Request / Contact
          used  Center Lathe KAMI DKM 420-N


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78055 · Center Lathe

          KAMI - DKM 420-N - - -neu- -

          Technical details
          turning diameter over bed 420 mm︱turning diameter over slide rest 250 mm︱turning length 1000 mm︱turning diameter in the gap 580 mm︱turning speeds 45 - 1800 U/min︱centre height 210 mm︱spindle bore 52 mm︱tailstock quill taper MT 4 MK︱total power requirement 4,4 kW︱weight of the machine ca. 1,5 t︱dimensions 1,95 x 0,85 x 1,35 m︱
          Center lathe with - 3-jaw chuck F 315 - Fixed tailstock top - Multifix holder - 2-axis digital display - Fixed Lynette 180 mm - Coolant system - rapid traverse
            turning diameter over bed 420 mm
            turning diameter over slide rest 250 mm
            turning length 1000 mm
            turning diameter in the gap 580 mm
            turning speeds 45 - 1800 U/min
            centre height 210 mm
            spindle bore 52 mm
            tailstock quill taper MT 4 MK
            total power requirement 4,4 kW
            weight of the machine ca. 1,5 t
            dimensions 1,95 x 0,85 x 1,35 m
            Description :
            Center lathe with
            - 3-jaw chuck F 315
            - Fixed tailstock top
            - Multifix holder
            - 2-axis digital display
            - Fixed Lynette 180 mm
            - Coolant system
            - rapid traverse
          Datasheet
          Request / Contact
          used  Center Lathe KAMI DKM 410S x 750


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78064 · Center Lathe

          KAMI - DKM 410S x 750 - - -neu- -

          Technical details
          turning diameter over bed 410 mm︱turning diameter over slide rest 240 mm︱turning length 750 mm︱turning diameter in the gap mm︱turning speeds 32 - 2000 U/min︱centre height 210 mm︱spindle bore 52 mm︱tailstock quill taper MT 3 MK︱total power requirement 2,2 kW︱weight of the machine ca. 0,8 t︱
          Center lathe with - 3-jaw chuck F 315 - Fixed tailstock top - Multifix holder - 2-axis digital display - Fixed Lynette 180 mm - Coolant system - rapid traverse
            turning diameter over bed 410 mm
            turning diameter over slide rest 240 mm
            turning length 750 mm
            turning speeds 32 - 2000 U/min
            centre height 210 mm
            spindle bore 52 mm
            tailstock quill taper MT 3 MK
            total power requirement 2,2 kW
            weight of the machine ca. 0,8 t
            Description :
            Center lathe with
            - 3-jaw chuck F 315
            - Fixed tailstock top
            - Multifix holder
            - 2-axis digital display
            - Fixed Lynette 180 mm
            - Coolant system
            - rapid traverse
          Datasheet
          Request / Contact
          used  Center Lathe SAEILO CONTUR SJ-470 / 1000 S


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78061 · Center Lathe

          SAEILO - CONTUR SJ-470 / 1000 S - - -Neu- -

          Technical details
          turning diameter over bed 470 mm︱turning diameter over slide rest 300 mm︱turning length 1000 mm︱spindle bore 58 mm︱turning speeds 20-2000 U/min︱total power requirement 5,5 kW︱weight of the machine ca. 1800 t︱dimensions of the machine ca. 1,95x0,9x1,4 m︱
            turning diameter over bed 470 mm
            turning diameter over slide rest 300 mm
            turning length 1000 mm
            spindle bore 58 mm
            turning speeds 20-2000 U/min
            total power requirement 5,5 kW
            weight of the machine ca. 1800 t
            dimensions of the machine ca. 1,95x0,9x1,4 m
          Datasheet
          Request / Contact
          used  Center Lathe KAMI DKM 410L


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78052 · Center Lathe

          KAMI - DKM 410L - - -neu- -

          Technical details
          turning diameter over bed 410 mm︱turning diameter over slide rest 240 mm︱turning length 1000 mm︱turning diameter in the gap 530 mm︱turning speeds 65 - 1810 U/min︱centre height 205 mm︱spindle bore 52 mm︱tailstock quill taper MT 4 ︱total power requirement 2,2 kW︱weight of the machine ca. 0,9 t︱dimensions of the machine ca. 1,9 x 0,8 x 1,3 m︱
          Center lathe with: 3-axis digital measuring system fully assembled electromagnetic main spindle brake auto. Feed in longitudinal and transverse direction safety relay Micrometer end stop coolant device 3-jaw lathe chuck with 1 set of turning and drilling jaws German operating instructions.
            turning diameter over bed 410 mm
            turning diameter over slide rest 240 mm
            turning length 1000 mm
            turning diameter in the gap 530 mm
            turning speeds 65 - 1810 U/min
            centre height 205 mm
            spindle bore 52 mm
            tailstock quill taper MT 4
            total power requirement 2,2 kW
            weight of the machine ca. 0,9 t
            dimensions of the machine ca. 1,9 x 0,8 x 1,3 m
            Description :
            Center lathe with:
            3-axis digital measuring system fully assembled
            electromagnetic main spindle brake
            auto. Feed in longitudinal and transverse direction
            safety relay
            Micrometer end stop
            coolant device
            3-jaw lathe chuck with 1 set of turning and drilling jaws
            German operating instructions.
          Datasheet
          Request / Contact
          used  Center Lathe KAMI DKM 420


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78053 · Center Lathe

          KAMI - DKM 420 - - -neu- -

          Technical details
          turning diameter over bed 420 mm︱turning diameter over slide rest 250 mm︱turning length 1000 mm︱turning diameter in the gap 580 mm︱turning speeds 45 - 1800 U/min︱centre height 210 mm︱spindle bore 52 mm︱tailstock quill taper MT 4 ︱total power requirement 4,4 kW︱weight of the machine ca. 1,6 t︱dimensions of the machine ca. 1,94 x 0,85 x 1,32 m︱
          Center lathe with - 3-jaw chuck F 315 - Fixed tailstock top - Multifix holder - 2-axis digital display - Fixed Lynette 180 mm - Coolant system - rapid traverse
            turning diameter over bed 420 mm
            turning diameter over slide rest 250 mm
            turning length 1000 mm
            turning diameter in the gap 580 mm
            turning speeds 45 - 1800 U/min
            centre height 210 mm
            spindle bore 52 mm
            tailstock quill taper MT 4
            total power requirement 4,4 kW
            weight of the machine ca. 1,6 t
            dimensions of the machine ca. 1,94 x 0,85 x 1,32 m
            Description :
            Center lathe with
            - 3-jaw chuck F 315
            - Fixed tailstock top
            - Multifix holder
            - 2-axis digital display
            - Fixed Lynette 180 mm
            - Coolant system
            - rapid traverse
          Datasheet
          Request / Contact
          used  Center Lathe KAMI DKM 460


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78056 · Center Lathe

          KAMI - DKM 460 - - -neu- -

          Technical details
          turning diameter over bed 460 mm︱turning diameter over slide rest 290 mm︱turning length 1000 mm︱turning diameter in the gap 700 mm︱turning speeds 25 - 1800 U/min︱centre height 230 mm︱spindle bore 80 mm︱tailstock quill taper MT 5 MK︱total power requirement 5,5 kW︱weight of the machine ca. 2,35 t︱dimensions of the machine ca. 2,31 x 1,0 x 1,25 m︱
          Center lathe with - 3-jaw chuck F 315 - Fixed tailstock top - Multifix holder - 2-axis digital display - Fixed Lynette 180 mm - Coolant system - rapid traverse
            turning diameter over bed 460 mm
            turning diameter over slide rest 290 mm
            turning length 1000 mm
            turning diameter in the gap 700 mm
            turning speeds 25 - 1800 U/min
            centre height 230 mm
            spindle bore 80 mm
            tailstock quill taper MT 5 MK
            total power requirement 5,5 kW
            weight of the machine ca. 2,35 t
            dimensions of the machine ca. 2,31 x 1,0 x 1,25 m
            Description :
            Center lathe with
            - 3-jaw chuck F 315
            - Fixed tailstock top
            - Multifix holder
            - 2-axis digital display
            - Fixed Lynette 180 mm
            - Coolant system
            - rapid traverse
          Datasheet
          Request / Contact
          used  Center Lathe KAMI DKM 332-1


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78050 · Center Lathe

          KAMI - DKM 332-1 - - -neu- -

          Technical details
          turning diameter over bed 330 mm︱turning diameter over slide rest 178 mm︱turning length 1000 mm︱turning diameter in the gap 450 mm︱turning speeds 70 - 2000 U/min︱centre height 165 mm︱spindle bore 38 mm︱tailstock quill taper MT 3 ︱total power requirement 1,1 kW︱weight of the machine ca. 0,5 t︱dimensions of the machine ca. 1,9 x 0,72 x 1,4 m︱
          Center lathe with - 3-jaw chuck F 315 - Fixed tailstock top - Multifix holder - 2-axis digital display - Fixed Lynette 180 mm - Coolant system - rapid traverse
            turning diameter over bed 330 mm
            turning diameter over slide rest 178 mm
            turning length 1000 mm
            turning diameter in the gap 450 mm
            turning speeds 70 - 2000 U/min
            centre height 165 mm
            spindle bore 38 mm
            tailstock quill taper MT 3
            total power requirement 1,1 kW
            weight of the machine ca. 0,5 t
            dimensions of the machine ca. 1,9 x 0,72 x 1,4 m
            Description :
            Center lathe with
            - 3-jaw chuck F 315
            - Fixed tailstock top
            - Multifix holder
            - 2-axis digital display
            - Fixed Lynette 180 mm
            - Coolant system
            - rapid traverse
          Datasheet
          Request / Contact
          used  Center Lathe KAMI DKM 500 S


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78059 · Center Lathe

          KAMI - DKM 500 S - - -neu- -

          Technical details
          turning diameter over bed 500 mm︱turning diameter over slide rest 300 mm︱turning length 1500 mm︱turning diameter in the gap 710 mm︱turning speeds 36 - 1600 U/min︱centre height 250 mm︱spindle bore 103 mm︱tailstock quill taper MT 5 MK︱tailstock travel 150 mm︱tailstock quill diameter 75 mm︱total power requirement 7,5 kW︱weight of the machine ca. 3,15 t︱dimensions of the machine ca. 3,65 x 1,0 x 1,3 m︱
          Highlights - Large 103mm spindle bore - High cutting performance, optimum cutting results - Electromechanical spindle brake - Sophisticated gear design for transmitting the engine power in high Torques and strong cutting forces - Tuned, stiff construction for the absorption of large cutting forces - Tailstock construction with large radius for the machining of long waves - Feed operation via one-hand lever technology with rapid traverse function Delivery: 3-jaw chuck 315 mm, 4-jaw face chuck 400 mm, 1 piece running bezel, 1 piece standing bezel, 120-250 mm passage.
            turning diameter over bed 500 mm
            turning diameter over slide rest 300 mm
            turning length 1500 mm
            turning diameter in the gap 710 mm
            turning speeds 36 - 1600 U/min
            centre height 250 mm
            spindle bore 103 mm
            tailstock quill taper MT 5 MK
            tailstock travel 150 mm
            tailstock quill diameter 75 mm
            total power requirement 7,5 kW
            weight of the machine ca. 3,15 t
            dimensions of the machine ca. 3,65 x 1,0 x 1,3 m
            Description :
            Highlights
            - Large 103mm spindle bore
            - High cutting performance, optimum cutting results
            - Electromechanical spindle brake
            - Sophisticated gear design for transmitting the engine power in high
            Torques and strong cutting forces
            - Tuned, stiff construction for the absorption of large cutting forces
            - Tailstock construction with large radius for the machining of long waves
            - Feed operation via one-hand lever technology with rapid traverse function
            Delivery:
            3-jaw chuck 315 mm, 4-jaw face chuck 400 mm, 1 piece
            running bezel, 1 piece standing bezel, 120-250 mm passage.
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •   

            Trader Profile:   WMT GmbH & Co.kg

          Contact Trader



            WMT GmbH & Co.kg
           Siemensstraße 1
            46342 - Velen-Ramsdorf
            Deutschland
            +49 2863 92477-47">+49 2863 92477-47
            +49 2863 92477-50
            info@w-m-t.de
            www.w-m-t.de

          Profile of Trader

          Welcome to WMT machine tools

          Purchase and sale of new and used machine tools.
          Sales of workshop equipment
          Purchase of used machine tools
          Processing of operating resolutions
          Mediation of complete production facilities

          Trade of machine tools of any kind. Are you looking for a used machine? Visit us…

          Aluminium Circular Saw Band Saw Band Saw - Automatic Band Saw - Automatic - Horizontal Band Saw - Vertical Bandsaw - HorizontalBandsaw mobile Bed Type Milling Machine - Universal Belt Grinding Machine Bench Drilling Machine Bench Lathe Boring Machine - Automatic Center Lathe CNC Lathe - Inclined Bed Type Cold Circular Saw Drilling and Milling M/C Flanging and Seam Rolling Machine Flat and plate processing Folding Machine Hand-Operated Press Heavy Duty Lathe High-Speed Radial Drilling Machine Hydr. pressbrake Hydraulic Press Lathe - cycle-controlled Notching Machine Piercing Press Pillar Drilling Machine Pipe-Bending Machine Plate Shear - Hydraulic Plate Shear - Mechanical Pneumatic Press Profile-Bending Machine Radial Drilling Machine Roller tracks / stop systems Rolls bending machine - 3 Rolls Rotary Welding Table Saw-Blade Sharpening Machine Section Shear - Combined Sheet metal working machine Sliding bed lathe Straightening Press - Double Column Surface Grinding Machine Table Type Boring and Milling Machine Thread-Cutting Machine Toggle Press - Single Column Tool Grinder - Universal tool presetter Tool Room Milling Machine - Universal Tryout Press - hydraulic Universal Milling Machine Vessel Turning Unit Welding Smoke Suction Welding Table Welding table equipment Wheel Stand Drawer cabinets pallet truck electric pallet trucks by hand Tool cabinets Tool trolleys Workbenchescantilever shelving system Container Fork Lift Truck - Electrical Heavy Goods Trailer Hoist Traverse Lift table Load magnet Sandblasting Machine bolster plate Chuck Clamping Chuck Clamping Table Cross-Moving-Table Faceplate Lynette Rotary Table Vise

          WMT GmbH & Co.KG

          Siemensstraße 1

          46342 Velen-Ramsdorf
          FON: +49 2863 92477-47
          FAX: +49 2863 92477-50
          E-Mail: info@w-m-t.de




          WMT GmbH  &  Co.kg   46342 - Velen-Ramsdorf Siemensstraße 1 Deutschland
          WMT GmbH & Co.kg

          Siemensstraße 1



          Contact Trader


            WMT GmbH & Co.kg
           Siemensstraße 1
            46342 - Velen-Ramsdorf
            Deutschland
            +49 2863 92477-47
            +49 2863 92477-50
            info@w-m-t.de
            www.w-m-t.de
            Contact person:

           




          Machine category


          Abkantpresse - hydraulisch · Abricht- und Dickenhobel · Alu-Kreissäge · Aufspanntisch · Ausklinkmaschine · Bandschleifmaschine · Bandsäge - horizontal · Bandsäge - Vertikal · Bandsäge mobil · Bandsägeautomat - Horizontal · Behälterdrehvorrichtung · Bettfräsmaschine - Vertikal · Biegemaschine horizontal · Blechbearbeitungsanlagen · Blechbiegemaschine - 3 Walzen · Blechbiegemaschine - 4 Walzen · Bohr- und Fräsmaschine · Bohrerschleifmaschine · Bügelmesschraube · Bügelsäge · Bügelsäge - Automatisch · Bürstenentgrater · Doppel-Gehrungsäge · Doppelschleifbock · Drehmaschine - zyklengesteuert · Drehmeißel/Drehstahl · Einständerpresse - Hydraulisch · Flachschleifmaschine · Flachstahl- / Plattenbearbeitung · Fräsmaschine - Universal · Gabelhubwagen - Elektro · Gabelhubwagen Elektro · Gabelhubwagen Hand · Gabelstapler Diesel · Gabelstapler Elektro · Gabelstapler Gas · Generatoren · Gewindebohrmaschine · Gewindeschneidmaschine · Gleitschleifanlage · Handhebelpresse · Handwerkzeuge · Hubtische · Kaltkreissäge · Kaltkreissäge - Automatik · Kapp- und Gehrungssäge · Kniehebelpresse - Einständer · Kombi-Schleifmaschine · Kompressoren · Krananlagen · Kreissäge · Kreuztisch · Kühlmittelanlage · Langgutregale · Lasthebemagnete · Leit- und Zugspindeldrehmaschine · Magnetbohrmaschine · Magnetspannplatte · Maschinen Untergestell · Maschinenleuchten · Messerschleifmaschine · Plasmaschneidegerät · Pneumatische Presse · Polierbock · Profil- Ring- Biegemaschine · Profilstahlschere - Kombiniert · Punktschweißmaschine · Regalsysteme · Reinigungssysteme · Richtpresse - Doppelständer · Rohrausschleifer · Rohrbiegemaschine · Rollenbahnen / Anschlag-Systeme · Räumnadeln · Schnellradiale - Bohrmaschine · Schraubenkompressor · Schraubstock · Schubladenschränke · Schweißanlage · Schweißdrehtisch · Schweißdrehtisch - rund · Schweißrauchabsaugung · Schweißtisch · Schweißtisch-Zubehör · Schweißzubehör · Schwenkbiegemaschine · Schwerlastanhänger · Sicken- und Bördelmaschine · Sonstige Fördertechnik · Sonstiges · Strahlanlage · Ständerbohrmaschine · Sägeblattschärfmaschine · Säulenbohrmaschine · Tafelschere - hydraulisch · Tafelschere - mechanisch · Teilapparat · Tischbohrmaschine · Tischbohrwerk · Tischdrehbank · Trowalisiermaschine · Unterstellbock · Wasserpumpe · Werkbänke · Werkstattpressen - hydraulisch · Werkzeugaufnahme · Werkzeugfräsmaschine - Universal · Werkzeugschränke · Werkzeugwagen ·